Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 64.1 >
edited by Xiaoling
on 2022/05/06 10:50
To version < 98.38 >
edited by Xiaoling
on 2022/05/14 16:56
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,36 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 -[[image:1651796979665-130.png]]
15 15  
16 -Document Version: 1.0.0
9 +**Contents:**
17 17  
18 -Image Version: v1.0
11 +{{toc/}}
19 19  
20 20  
14 +(% class="wikigeneratedid" id="H" %)
15 +(((
16 +
17 +)))
21 21  
19 += 1. Introduction =
22 22  
23 -{{toc numbered="true" depth="4"/}}
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
24 24  
25 -
26 -
27 -
28 -~1. Introduction
29 -
30 - 1.1 What is PG1302 LoRaWAN Concentrator?
31 -
32 32  (((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 34  )))
35 35  
36 36  (((
... ... @@ -41,14 +41,8 @@
41 41  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
42 42  )))
43 43  
44 -(((
45 -(((
46 -
47 -)))
48 -)))
35 +== 1.2 Features ==
49 49  
50 -1.2 Features
51 -
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,36 +56,28 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
44 +== 1.3 General Interfaces ==
59 59  
60 -
61 -1.3 General Interfaces
62 -
63 63  * SPI interface for LoRa
64 64  * Power Input: 5v, 1A
65 65  * 1 x I-PEX for LoRa
66 66  
67 -1.4 Pin Mapping
50 +== 1.4 Pin Mapping ==
68 68  
69 69   [[image:1651743282627-547.png||height="402" width="425"]]
70 70  
54 +== 1.5 LEDs ==
71 71  
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
72 72  
73 -1.5 LEDs
60 +== 1.6 Power Consumption ==
74 74  
75 - TX: Blink when transmit a packet
62 + TBD
76 76  
77 - RX: Blink when receive a packet
64 +== 1.7 Applications ==
78 78  
79 - Config: Always ON
80 -
81 -
82 -1.6 Power Consumption
83 -
84 - TBD
85 -
86 -
87 -1.7 Applications
88 -
89 89  * Smart Buildings & Home Automation
90 90  * Logistics and Supply Chain Management
91 91  * Smart Metering
... ... @@ -93,47 +93,38 @@
93 93  * Smart Cities
94 94  * Smart Factory
95 95  
96 -2. Example: Set up as LoRaWAN gateway.
73 += 2. Example: Set up as LoRaWAN gateway. =
97 97  
98 - 2.1 System structure
75 +== 2.1 System structure ==
99 99  
100 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
101 101  
102 -(% style="text-align:center" %)
103 103  [[image:1651743698677-436.png||height="457" width="686"]]
104 104  
81 +== 2.2 Hardware Installation ==
105 105  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
106 106  
107 -2.2 Hardware Installation
108 -
109 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
110 -
111 -(% style="text-align:center" %)
112 112  [[image:1651743803032-803.png]]
113 113  
87 += 3. Install the software? =
114 114  
89 +There are two ways to install software in RPi4 to use PG1302.
115 115  
116 -3. Install the software?
117 -
118 - There are two ways to install software in RPi4 to use PG1302.
119 -
120 120  * Flash SD card with Dragino pre-build image which support Web UI.
121 121  * Install lora packet forwarder in existing RPi OS.
122 122  
123 -4. Flash with pre-build image
94 += 4. Flash with pre-build image =
124 124  
125 - 4.1 Download the dragino image for RPI
96 +== 4.1 Download the dragino image for RPI ==
126 126  
127 - Download PG1302_for_Rpi4_64_with_webui from
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
128 128  
129 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
101 +== 4.2 Flash the image to SD card ==
130 130  
103 +Flash the image to SD card:
131 131  
132 -4.2 Flash the image to SD card
133 -
134 - Flash the image to SD card:
135 -
136 -(% style="text-align:center" %)
137 137  [[image:1651744119133-233.png||height="373" width="621"]]
138 138  
139 139   Note: Download the flash tool following this link
... ... @@ -140,356 +140,333 @@
140 140  
141 141   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
142 142  
111 +== 4.3 Access the Linux console ==
143 143  
144 -4.3 Access the Linux console.
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
145 145  
146 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
147 -
148 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
149 -
150 -(% style="text-align:center" %)
151 151  [[image:1651744193675-591.png||height="450" width="466"]]
152 152  
117 +The account details for Web Login are:
153 153  
154 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
155 155  
156 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
157 157  
158 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
159 159  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
160 160  
161 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
162 162  
163 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
164 164  
165 -
166 - After log in, you will be in the Linux console and type command here.
167 -
168 -(% style="text-align:center" %)
169 169  [[image:1651744358515-107.png||height="366" width="581"]]
170 170  
143 +== 4.4 Access the WebUI of RPi4. ==
171 171  
172 - 4.4 Access the WebUI of RPi4.
145 +=== 4.4.1 Home page ===
173 173  
174 - 4.4.1 Home page
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
175 175  
176 - Open a browser on the PC and type the RPI ip address
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
177 177  
178 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
179 -
180 -
181 - You will see the login interface of RPI as shown below.
182 -
183 - The account details for Web Login are:
184 -
185 -**~ User Name: root**
186 -
187 -**~ Password:   dragino**
188 -
189 -(% style="text-align:center" %)
190 190  [[image:1651744457761-993.png||height="352" width="621"]]
191 191  
158 +=== 4.4.2 LoRa Page ===
192 192  
193 -4.4.2 LoRa Page
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
194 194  
195 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
196 -
197 -(% style="text-align:center" %)
198 198  [[image:1651744554845-970.png||height="328" width="621"]]
199 199  
164 +Different PG1302 hardware version can support different frequency range:
200 200  
201 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
202 202  
203 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
204 204  
205 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
206 206  
172 +page LogRead ~-~-> LoRa Log
207 207  
208 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
209 209  
210 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
211 211  
212 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
213 213  
214 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
215 215  
216 -
217 -4.4.3 LoRaWAN Page
218 -
219 - 4.4.3.1 Semtech UDP
220 -
221 -
222 -(% style="text-align:center" %)
223 223  [[image:1651744767914-283.png||height="352" width="621"]]
224 224  
184 +Note *: See this instruction for how to configure TTN.
225 225  
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
226 226  
227 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
228 228  
229 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
230 -
231 -
232 -4.4.3.2 Basic Station
233 -
234 -(% style="text-align:center" %)
235 235  [[image:1651744890629-683.png||height="380" width="621"]]
236 236  
192 +Note *: See this instruction for how to configure TTN.
237 237  
238 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
239 239  
240 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
241 241  
198 +==== 4.4.4.1 LoRa Log ====
242 242  
243 -4.4.4 LogRead
244 -
245 - 4.4.4.1 LoRa Log
246 -
247 -(% style="text-align:center" %)
248 248  [[image:1651744955955-452.png||height="571" width="621"]]
249 249  
202 +Show the frequency for LoRa Radio and traffics.
250 250  
251 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
252 252  
206 +Show system log.
253 253  
254 -4.4.4.2 System Log
255 -
256 - Show system log.
257 -
258 -(% style="text-align:center" %)
259 259  [[image:1651745003470-264.png||height="477" width="621"]]
260 260  
210 +==== 4.4.4.3 Record Log ====
261 261  
262 -
263 -4.4.4.3 Record Log
264 -
265 -
266 266  **Record the system log.**
267 267  
268 -(% style="text-align:center" %)
269 269  [[image:1651745069814-662.png||height="144" width="621"]]
270 270  
216 += 5. Install stand alone LoRa Packet Forwarder. =
271 271  
272 -5. Install stand alone LoRa Packet Forwarder.
218 +== 5.1 OS requirement ==
273 273  
274 - 5.1 OS requirement
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
275 275  
276 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
277 -
278 - pi@raspberrypi:~~$ cat /etc/os-release
279 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
280 280   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
281 -
282 282   NAME="Raspbian GNU/Linux"
283 -
284 284   VERSION_ID="8"
285 -
286 286   VERSION="8 (jessie)"
287 -
288 288   ID=raspbian
289 -
290 290   ID_LIKE=debian
291 -
292 292   HOME_URL="http:~/~/www.raspbian.org/"
293 -
294 294   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
295 -
296 296   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
297 297  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
298 298  
299 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
238 +In RPI, run below command to get a Gateway ID
300 300  
301 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
302 302  
303 - ifconfig eth0
304 -
305 -(% style="text-align:center" %)
306 306  [[image:1651745210205-512.png||height="130" width="621"]]
307 307  
247 +(((
248 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
249 +)))
308 308  
309 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
310 -
311 -(% style="text-align:center" %)
312 312  [[image:1651745267862-321.png||height="526" width="621"]]
313 313  
314 -
315 -
316 -(% style="text-align:center" %)
317 317  [[image:1651745306744-481.png||height="478" width="621"]]
318 318  
319 319  After set up, the status should show not connected as below:
320 320  
321 -(% style="text-align:center" %)
322 322  [[image:1651745366987-458.png||height="363" width="621"]]
323 323  
259 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
324 324  
261 +Enable SPI and I2C first:
325 325  
326 -5.2.1 Download and install LoRaWAN packet forwarder
263 +a)SPI needs to be enabled on the Raspberry Pi
327 327  
328 - Enable SPI and I2C first:
265 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
329 329  
330 - a)SPI needs to be enabled on the Raspberry Pi
267 +[[image:1651745476754-240.png||height="234" width="629"]]
331 331  
332 - Run sudo raspi-config to open the config window
333 -
334 -(% style="text-align:center" %)
335 -[[image:1651745476754-240.png||height="235" width="631"]]
336 -
337 -
338 -(% style="text-align:center" %)
339 339  [[image:image-20220505181135-1.png]]
340 340  
341 -(% style="text-align:center" %)
342 -[[image:image-20220505181135-2.png]]
271 +[[image:image-20220505181135-2.png||height="229" width="622"]]
343 343  
273 +In RPI , Fist: Enter root account:
344 344  
275 +[[image:1651745583363-614.png||height="151" width="732"]]
345 345  
346 346  
347 - In RPI , Fist: Enter root account:
278 +and then run:
348 348  
349 -(% style="text-align:center" %)
350 -[[image:1651745583363-614.png]]
280 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
351 351  
282 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
352 352  
353 - and then run:
284 +(% style="background-color:#dcdcdc" %)./auto_install.sh
354 354  
355 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
286 +[[image:1651745611629-818.png||height="225" width="729"]]
356 356  
357 - chmod +x ./auto_install.sh
288 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
358 358  
359 - ./auto_install.sh
290 +You can get these output:
360 360  
361 -(% style="text-align:center" %)
362 -[[image:1651745611629-818.png]]
363 -
364 -
365 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
366 -
367 - You can get these output:
368 -
369 -(% style="text-align:center" %)
370 370  [[image:1651745657252-173.png||height="426" width="621"]]
371 371  
294 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
372 372  
373 -5.5.2 Config Gateway ID, Frequency Band and Server address
296 +(((
297 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
298 +)))
374 374  
375 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
300 +(((
301 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
302 +)))
376 376  
377 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
378 -
379 -(% style="text-align:center" %)
380 380  [[image:1651745709709-887.png||height="820" width="621"]]
381 381  
306 +User can find the TTN v3 server address from:
382 382  
383 - User can find the TTN v3 server address from:
308 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
384 384  
385 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
310 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
386 386  
387 -
388 - And the default frequency band is US915 in **global_conf.json** file.
389 -
390 -(% style="text-align:center" %)
391 391  [[image:1651745838008-820.png||height="650" width="621"]]
392 392  
314 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
393 393  
394 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
316 + 1).Chose your need the name of region frequency.
395 395  
396 - 1).Chose your need the name of region frequency.
318 +[[image:1651745867516-322.png||height="83" width="740"]]
397 397  
398 -(% style="text-align:center" %)
399 -[[image:1651745867516-322.png]]
400 -
401 -
402 402   2). Use this command to copy it.
403 403  
404 404   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
405 405  
406 -(% style="text-align:center" %)
407 -[[image:1651745984006-868.png]]
324 +[[image:1651745984006-868.png||height="87" width="745"]]
408 408  
326 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
409 409  
410 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
328 +=== 5.2.3 Check result ===
411 411  
412 -5.2.3 Check result
330 +(((
331 +Run below command to restart the dragino_fwd:
332 +)))
413 413  
414 - Run below command to restart the dragino_fwd:
334 +(((
335 +(% class="box infomessage" %)
336 +(((
337 +sudo systemctl stop draginofwd
338 +)))
415 415  
416 - sudo systemctl stop draginofwd
340 +(% class="box infomessage" %)
341 +(((
342 +sudo systemctl start draginofwd
343 +)))
344 +)))
417 417  
418 - sudo systemctl start draginofwd
346 +(((
347 +debug check the ruing status of fwd:
348 +)))
419 419  
420 - debug check the ruing status of fwd:
350 +(((
351 +(% class="box infomessage" %)
352 +(((
353 +sudo systemctl status draginofwd
354 +)))
355 +)))
421 421  
422 - sudo systemctl status draginofwd
357 +[[image:1651746045057-414.png||height="193" width="729"]]
423 423  
424 -(% style="text-align:center" %)
425 -[[image:1651746045057-414.png]]
359 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
426 426  
427 -
428 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
429 -
430 -(% style="text-align:center" %)
431 431  [[image:1651746078253-168.png||height="372" width="621"]]
432 432  
433 433  
364 +We can check dragino_fwd running states in RPi by running:
434 434  
435 - We can check dragino_fwd running states in RPi by running:
366 +(% class="box infomessage" %)
367 +(((
368 +*
369 +** sudo journalctl -u draginofwd -f
370 +)))
436 436  
437 - //**sudo journalctl -u draginofwd -f**//
372 +[[image:1651746111963-838.png||height="184" width="730"]]
438 438  
439 -(% style="text-align:center" %)
440 -[[image:1651746111963-838.png]]
374 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
441 441  
442 -
443 -
444 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
445 -
446 -(% style="text-align:center" %)
447 447  [[image:1651746139304-966.png||height="326" width="621"]]
448 448  
378 +=== 5.2.4 Commands to handle service ===
449 449  
380 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
381 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
382 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
383 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
384 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
450 450  
451 -5.2.4 Commands to handle service
386 += 6. Order Info =
452 452  
453 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
454 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
455 -* **Start** dragino_fwd : sudo systemctl start draginofwd
456 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
457 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
388 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
458 458  
459 -6. Order Info
390 +**~ (% style="color:#0000ff" %)XX:(%%)**
460 460  
461 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
392 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
393 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
394 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
462 462  
463 -**~ XX:**
396 += 7. Packing Info =
464 464  
465 -* 868 (For Bands: EU868,IN865)
466 -* 915 (For Bands: US915,AU915,AS923,KR920)
467 -* 470 (For Band: CN470)
398 +(((
399 +**PG1302 Package Includes**:
400 +)))
468 468  
469 -7. Packing Info
470 -
471 -**~ PG1302 Package Includes**:
472 -
402 +(((
473 473  * PG1302 x 1
474 -* LoRa Antenna x 1
404 +)))
475 475  
476 -**~ PG1302-PI Package Includes**:
477 -
478 -* PG1302 x 1
406 +(((
479 479  * LoRa Antenna x 1
480 -* RPi3/4 converter PCB
481 -* Screws to hole converter PCB on RPI.
408 +)))
482 482  
483 -8. Reference
410 +(((
411 +**PG1302-PI Package Includes**:
412 +)))
484 484  
485 -* Datasheet, User Manual & Software Download:
414 +* (((
415 +PG1302 x 1
416 +)))
417 +* (((
418 +LoRa Antenna x 1
419 +)))
420 +* (((
421 +RPi3/4 converter PCB
422 +)))
486 486  
487 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
424 +(((
425 +* Screws to hole converter PCB on RPI.
488 488  
427 += 8. Support =
489 489  
490 -9. Support
429 +(((
430 +If you are experiencing issues and can’t solve, you can send mail to
431 +)))
491 491  
492 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
493 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
433 +(((
434 +[[support@dragino.com>>mailto:support@dragino.com]]
435 +)))
494 494  
495 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
437 +(((
438 +With your question as detail as possible. We will reply and help you in the shortest.
439 +)))
440 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0