Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 62.1 >
edited by Xiaoling
on 2022/05/06 10:48
To version < 99.3 >
edited by Xiaoling
on 2022/05/14 17:03
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,36 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 -
12 12  **PG1302 LoRaWAN Concentrator User Manual**
13 13  
14 -[[image:1651796979665-130.png]]
15 15  
16 -Document Version: 1.0.0
9 +**Contents:**
17 17  
18 -Image Version: v1.0
11 +{{toc/}}
19 19  
20 20  
14 +(% class="wikigeneratedid" id="H" %)
15 +(((
16 +
17 +)))
21 21  
19 += 1. Introduction =
22 22  
23 -{{toc numbered="true" depth="4"/}}
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
24 24  
25 -
26 -
27 -
28 -~1. Introduction
29 -
30 - 1.1 What is PG1302 LoRaWAN Concentrator?
31 -
32 32  (((
33 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 34  )))
35 35  
36 36  (((
... ... @@ -41,14 +41,8 @@
41 41  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
42 42  )))
43 43  
44 -(((
45 -(((
46 -
47 -)))
48 -)))
35 +== 1.2 Features ==
49 49  
50 -1.2 Features
51 -
52 52  * Base on Semtech SX1302 solution
53 53  * Support Raspberry Pi 3B/3B+/4
54 54  * Up to -140dBm sensitivity
... ... @@ -56,36 +56,28 @@
56 56  * Mini-PCIe Interface
57 57  * Converter board to support Raspberry Pi
58 58  
44 +== 1.3 General Interfaces ==
59 59  
60 -1.3 General Interfaces
61 -
62 62  * SPI interface for LoRa
63 63  * Power Input: 5v, 1A
64 64  * 1 x I-PEX for LoRa
65 65  
50 +== 1.4 Pin Mapping ==
66 66  
67 -1.4 Pin Mapping
68 -
69 69   [[image:1651743282627-547.png||height="402" width="425"]]
70 70  
54 +== 1.5 LEDs ==
71 71  
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
72 72  
73 -1.5 LEDs
60 +== 1.6 Power Consumption ==
74 74  
75 - TX: Blink when transmit a packet
62 + TBD
76 76  
77 - RX: Blink when receive a packet
64 +== 1.7 Applications ==
78 78  
79 - Config: Always ON
80 -
81 -
82 -1.6 Power Consumption
83 -
84 - TBD
85 -
86 -
87 -1.7 Applications
88 -
89 89  * Smart Buildings & Home Automation
90 90  * Logistics and Supply Chain Management
91 91  * Smart Metering
... ... @@ -93,49 +93,38 @@
93 93  * Smart Cities
94 94  * Smart Factory
95 95  
73 += 2. Example: Set up as LoRaWAN gateway. =
96 96  
97 -2. Example: Set up as LoRaWAN gateway.
75 +== 2.1 System structure ==
98 98  
99 - 2.1 System structure
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
100 100  
101 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
102 -
103 -(% style="text-align:center" %)
104 104  [[image:1651743698677-436.png||height="457" width="686"]]
105 105  
81 +== 2.2 Hardware Installation ==
106 106  
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
107 107  
108 -2.2 Hardware Installation
109 -
110 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
111 -
112 -(% style="text-align:center" %)
113 113  [[image:1651743803032-803.png]]
114 114  
87 += 3. Install the software? =
115 115  
89 +There are two ways to install software in RPi4 to use PG1302.
116 116  
117 -3. Install the software?
118 -
119 - There are two ways to install software in RPi4 to use PG1302.
120 -
121 121  * Flash SD card with Dragino pre-build image which support Web UI.
122 122  * Install lora packet forwarder in existing RPi OS.
123 123  
94 += 4. Flash with pre-build image =
124 124  
125 -4. Flash with pre-build image
96 +== 4.1 Download the dragino image for RPI ==
126 126  
127 - 4.1 Download the dragino image for RPI
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
128 128  
129 - Download PG1302_for_Rpi4_64_with_webui from
101 +== 4.2 Flash the image to SD card ==
130 130  
131 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
103 +Flash the image to SD card:
132 132  
133 -
134 -4.2 Flash the image to SD card
135 -
136 - Flash the image to SD card:
137 -
138 -(% style="text-align:center" %)
139 139  [[image:1651744119133-233.png||height="373" width="621"]]
140 140  
141 141   Note: Download the flash tool following this link
... ... @@ -142,360 +142,347 @@
142 142  
143 143   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
144 144  
111 +== 4.3 Access the Linux console ==
145 145  
146 -4.3 Access the Linux console.
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
147 147  
148 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
149 -
150 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
151 -
152 -(% style="text-align:center" %)
153 153  [[image:1651744193675-591.png||height="450" width="466"]]
154 154  
117 +The account details for Web Login are:
155 155  
156 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
157 157  
158 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
159 159  
160 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
161 161  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
162 162  
163 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
164 164  
165 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
166 166  
167 -
168 - After log in, you will be in the Linux console and type command here.
169 -
170 -(% style="text-align:center" %)
171 171  [[image:1651744358515-107.png||height="366" width="581"]]
172 172  
143 +== 4.4 Access the WebUI of RPi4. ==
173 173  
174 - 4.4 Access the WebUI of RPi4.
145 +=== 4.4.1 Home page ===
175 175  
176 - 4.4.1 Home page
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
177 177  
178 - Open a browser on the PC and type the RPI ip address
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
179 179  
180 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
181 -
182 -
183 - You will see the login interface of RPI as shown below.
184 -
185 - The account details for Web Login are:
186 -
187 -**~ User Name: root**
188 -
189 -**~ Password:   dragino**
190 -
191 -(% style="text-align:center" %)
192 192  [[image:1651744457761-993.png||height="352" width="621"]]
193 193  
158 +=== 4.4.2 LoRa Page ===
194 194  
195 -4.4.2 LoRa Page
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
196 196  
197 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
198 -
199 -(% style="text-align:center" %)
200 200  [[image:1651744554845-970.png||height="328" width="621"]]
201 201  
164 +Different PG1302 hardware version can support different frequency range:
202 202  
203 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
204 204  
205 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
206 206  
207 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
208 208  
172 +page LogRead ~-~-> LoRa Log
209 209  
210 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
211 211  
212 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
213 213  
214 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
215 215  
216 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
217 217  
218 -
219 -4.4.3 LoRaWAN Page
220 -
221 - 4.4.3.1 Semtech UDP
222 -
223 -
224 -(% style="text-align:center" %)
225 225  [[image:1651744767914-283.png||height="352" width="621"]]
226 226  
184 +Note *: See this instruction for how to configure TTN.
227 227  
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
228 228  
229 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
230 230  
231 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
232 -
233 -
234 -4.4.3.2 Basic Station
235 -
236 -(% style="text-align:center" %)
237 237  [[image:1651744890629-683.png||height="380" width="621"]]
238 238  
192 +Note *: See this instruction for how to configure TTN.
239 239  
240 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
241 241  
242 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
243 243  
198 +==== 4.4.4.1 LoRa Log ====
244 244  
245 -4.4.4 LogRead
246 -
247 - 4.4.4.1 LoRa Log
248 -
249 -(% style="text-align:center" %)
250 250  [[image:1651744955955-452.png||height="571" width="621"]]
251 251  
202 +Show the frequency for LoRa Radio and traffics.
252 252  
253 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
254 254  
206 +Show system log.
255 255  
256 -4.4.4.2 System Log
257 -
258 - Show system log.
259 -
260 -(% style="text-align:center" %)
261 261  [[image:1651745003470-264.png||height="477" width="621"]]
262 262  
210 +==== 4.4.4.3 Record Log ====
263 263  
264 -
265 -4.4.4.3 Record Log
266 -
267 -
268 268  **Record the system log.**
269 269  
270 -(% style="text-align:center" %)
271 271  [[image:1651745069814-662.png||height="144" width="621"]]
272 272  
216 += 5. Install stand alone LoRa Packet Forwarder. =
273 273  
274 -5. Install stand alone LoRa Packet Forwarder.
218 +== 5.1 OS requirement ==
275 275  
276 - 5.1 OS requirement
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
277 277  
278 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
279 -
280 - pi@raspberrypi:~~$ cat /etc/os-release
281 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
282 282   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
283 -
284 284   NAME="Raspbian GNU/Linux"
285 -
286 286   VERSION_ID="8"
287 -
288 288   VERSION="8 (jessie)"
289 -
290 290   ID=raspbian
291 -
292 292   ID_LIKE=debian
293 -
294 294   HOME_URL="http:~/~/www.raspbian.org/"
295 -
296 296   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
297 -
298 298   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
299 299  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
300 300  
301 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
238 +In RPI, run below command to get a Gateway ID
302 302  
303 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
304 304  
305 - ifconfig eth0
306 -
307 -(% style="text-align:center" %)
308 308  [[image:1651745210205-512.png||height="130" width="621"]]
309 309  
247 +(((
248 +(((
249 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
250 +)))
251 +)))
310 310  
311 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
312 -
313 -(% style="text-align:center" %)
314 314  [[image:1651745267862-321.png||height="526" width="621"]]
315 315  
316 -
317 -
318 -(% style="text-align:center" %)
319 319  [[image:1651745306744-481.png||height="478" width="621"]]
320 320  
321 321  After set up, the status should show not connected as below:
322 322  
323 -(% style="text-align:center" %)
324 324  [[image:1651745366987-458.png||height="363" width="621"]]
325 325  
261 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
326 326  
263 +Enable SPI and I2C first:
327 327  
328 -5.2.1 Download and install LoRaWAN packet forwarder
265 +a)SPI needs to be enabled on the Raspberry Pi
329 329  
330 - Enable SPI and I2C first:
267 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
331 331  
332 - a)SPI needs to be enabled on the Raspberry Pi
269 +[[image:1651745476754-240.png||height="234" width="629"]]
333 333  
334 - Run sudo raspi-config to open the config window
335 -
336 -(% style="text-align:center" %)
337 -[[image:1651745476754-240.png||height="235" width="631"]]
338 -
339 -
340 -(% style="text-align:center" %)
341 341  [[image:image-20220505181135-1.png]]
342 342  
343 -(% style="text-align:center" %)
344 -[[image:image-20220505181135-2.png]]
273 +[[image:image-20220505181135-2.png||height="229" width="622"]]
345 345  
275 +In RPI , Fist: Enter root account:
346 346  
277 +(((
278 +[[image:1651745583363-614.png||height="151" width="732"]]
279 +)))
347 347  
281 +and then run:
348 348  
349 - In RPI , Fist: Enter root account:
283 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
350 350  
351 -(% style="text-align:center" %)
352 -[[image:1651745583363-614.png]]
285 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
353 353  
287 +(% style="background-color:#dcdcdc" %)./auto_install.sh
354 354  
355 - and then run:
289 +(((
290 +[[image:1651745611629-818.png||height="225" width="729"]]
291 +)))
356 356  
357 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
293 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
358 358  
359 - chmod +x ./auto_install.sh
295 +You can get these output:
360 360  
361 - ./auto_install.sh
362 -
363 -(% style="text-align:center" %)
364 -[[image:1651745611629-818.png]]
365 -
366 -
367 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
368 -
369 - You can get these output:
370 -
371 -(% style="text-align:center" %)
297 +(((
372 372  [[image:1651745657252-173.png||height="426" width="621"]]
299 +)))
373 373  
301 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
374 374  
375 -5.5.2 Config Gateway ID, Frequency Band and Server address
303 +(((
304 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
305 +)))
376 376  
377 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
307 +(((
308 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
309 +)))
378 378  
379 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
380 -
381 -(% style="text-align:center" %)
382 382  [[image:1651745709709-887.png||height="820" width="621"]]
383 383  
313 +User can find the TTN v3 server address from:
384 384  
385 - User can find the TTN v3 server address from:
315 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
386 386  
387 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
317 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
388 388  
389 -
390 - And the default frequency band is US915 in **global_conf.json** file.
391 -
392 -(% style="text-align:center" %)
393 393  [[image:1651745838008-820.png||height="650" width="621"]]
394 394  
321 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
395 395  
396 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
323 + 1).Chose your need the name of region frequency.
397 397  
398 - 1).Chose your need the name of region frequency.
325 +[[image:1651745867516-322.png||height="83" width="740"]]
399 399  
400 -(% style="text-align:center" %)
401 -[[image:1651745867516-322.png]]
402 -
403 -
404 404   2). Use this command to copy it.
405 405  
406 406   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
407 407  
408 -(% style="text-align:center" %)
409 -[[image:1651745984006-868.png]]
331 +[[image:1651745984006-868.png||height="87" width="745"]]
410 410  
333 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
411 411  
412 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
335 +=== 5.2.3 Check result ===
413 413  
337 +(((
338 +Run below command to restart the dragino_fwd:
339 +)))
414 414  
415 -5.2.3 Check result
341 +(((
342 +(% class="box infomessage" %)
343 +(((
344 +sudo systemctl stop draginofwd
345 +)))
416 416  
417 - Run below command to restart the dragino_fwd:
347 +(% class="box infomessage" %)
348 +(((
349 +sudo systemctl start draginofwd
350 +)))
351 +)))
418 418  
419 - sudo systemctl stop draginofwd
353 +(((
354 +debug check the ruing status of fwd:
355 +)))
420 420  
421 - sudo systemctl start draginofwd
357 +(((
358 +(% class="box infomessage" %)
359 +(((
360 +sudo systemctl status draginofwd
361 +)))
362 +)))
422 422  
423 - debug check the ruing status of fwd:
364 +[[image:1651746045057-414.png||height="193" width="729"]]
424 424  
425 - sudo systemctl status draginofwd
366 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
426 426  
427 -(% style="text-align:center" %)
428 -[[image:1651746045057-414.png]]
429 -
430 -
431 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
432 -
433 -(% style="text-align:center" %)
434 434  [[image:1651746078253-168.png||height="372" width="621"]]
435 435  
436 436  
371 +We can check dragino_fwd running states in RPi by running:
437 437  
438 - We can check dragino_fwd running states in RPi by running:
373 +(% class="box infomessage" %)
374 +(((
375 +*
376 +** sudo journalctl -u draginofwd -f
377 +)))
439 439  
440 - //**sudo journalctl -u draginofwd -f**//
379 +[[image:1651746111963-838.png||height="184" width="730"]]
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746111963-838.png]]
381 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
444 444  
445 -
446 -
447 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
448 -
449 -(% style="text-align:center" %)
450 450  [[image:1651746139304-966.png||height="326" width="621"]]
451 451  
385 +=== 5.2.4 Commands to handle service ===
452 452  
387 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
388 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
389 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
390 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
391 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
453 453  
454 -5.2.4 Commands to handle service
393 += 6. Order Info =
455 455  
456 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
457 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
458 -* **Start** dragino_fwd : sudo systemctl start draginofwd
459 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
460 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
395 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
461 461  
397 +**~ (% style="color:#0000ff" %)XX:(%%)**
462 462  
463 -6. Order Info
399 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
400 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
401 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
464 464  
465 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
403 += 7. Packing Info =
466 466  
467 -**~ XX:**
405 +(((
406 +**PG1302 Package Includes**:
407 +)))
468 468  
469 -* 868 (For Bands: EU868,IN865)
470 -* 915 (For Bands: US915,AU915,AS923,KR920)
471 -* 470 (For Band: CN470)
409 +(((
410 +* (((
411 +PG1302 x 1
412 +)))
413 +* (((
414 +LoRa Antenna x 1
415 +)))
416 +)))
472 472  
418 +(((
419 +
420 +)))
473 473  
474 -7. Packing Info
422 +(((
423 +**PG1302-PI Package Includes**:
424 +)))
475 475  
476 -**~ PG1302 Package Includes**:
426 +* (((
427 +PG1302 x 1
428 +)))
429 +* (((
430 +LoRa Antenna x 1
431 +)))
432 +* (((
433 +RPi3/4 converter PCB
434 +)))
477 477  
478 -* PG1302 x 1
479 -* LoRa Antenna x 1
436 +(((
437 +* (((
438 +Screws to hole converter PCB on RPI.
439 +)))
480 480  
481 -**~ PG1302-PI Package Includes**:
441 += 8. Support =
482 482  
483 -* PG1302 x 1
484 -* LoRa Antenna x 1
485 -* RPi3/4 converter PCB
486 -* Screws to hole converter PCB on RPI.
443 +(((
444 +If you are experiencing issues and can’t solve, you can send mail to
445 +)))
487 487  
447 +(((
448 +[[support@dragino.com>>mailto:support@dragino.com]]
449 +)))
488 488  
489 -8. Reference
490 -
491 -* Datasheet, User Manual & Software Download:
492 -
493 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
494 -
495 -
496 -9. Support
497 -
498 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
499 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
500 -
501 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
451 +(((
452 +With your question as detail as possible. We will reply and help you in the shortest.
453 +)))
454 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0