Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 61.1 >
edited by Xiaoling
on 2022/05/06 10:19
To version < 99.2 >
edited by Xiaoling
on 2022/05/14 17:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 LoRaWAN Concentrator
Content
... ... @@ -1,37 +3,27 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg||height="391" width="549"]]
5 5  
6 6  
7 7  
8 -
9 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.gif]]
10 -
11 -
12 -
13 13  **PG1302 LoRaWAN Concentrator User Manual**
14 14  
15 -[[image:1651796979665-130.png]]
16 16  
17 -Document Version: 1.0.0
9 +**Contents:**
18 18  
19 -Image Version: v1.0
11 +{{toc/}}
20 20  
21 21  
14 +(% class="wikigeneratedid" id="H" %)
15 +(((
16 +
17 +)))
22 22  
19 += 1. Introduction =
23 23  
24 -{{toc numbered="true" depth="4"/}}
21 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
25 25  
26 -
27 -
28 -
29 -~1. Introduction
30 -
31 - 1.1 What is PG1302 LoRaWAN Concentrator?
32 -
33 33  (((
34 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
35 35  )))
36 36  
37 37  (((
... ... @@ -42,14 +42,8 @@
42 42  PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
43 43  )))
44 44  
45 -(((
46 -(((
47 -
48 -)))
49 -)))
35 +== 1.2 Features ==
50 50  
51 -1.2 Features
52 -
53 53  * Base on Semtech SX1302 solution
54 54  * Support Raspberry Pi 3B/3B+/4
55 55  * Up to -140dBm sensitivity
... ... @@ -57,32 +57,28 @@
57 57  * Mini-PCIe Interface
58 58  * Converter board to support Raspberry Pi
59 59  
60 -1.3 General Interfaces
44 +== 1.3 General Interfaces ==
61 61  
62 62  * SPI interface for LoRa
63 63  * Power Input: 5v, 1A
64 64  * 1 x I-PEX for LoRa
65 65  
66 -1.4 Pin Mapping
50 +== 1.4 Pin Mapping ==
67 67  
68 68   [[image:1651743282627-547.png||height="402" width="425"]]
69 69  
70 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.gif]]
54 +== 1.5 LEDs ==
71 71  
72 -1.5 LEDs
56 + TX: Blink when transmit a packet
57 + RX: Blink when receive a packet
58 + Config: Always ON
73 73  
74 - TX: Blink when transmit a packet
60 +== 1.6 Power Consumption ==
75 75  
76 - RX: Blink when receive a packet
62 + TBD
77 77  
78 - Config: Always ON
64 +== 1.7 Applications ==
79 79  
80 -1.6 Power Consumption
81 -
82 - TBD
83 -
84 -1.7 Applications
85 -
86 86  * Smart Buildings & Home Automation
87 87  * Logistics and Supply Chain Management
88 88  * Smart Metering
... ... @@ -90,429 +90,385 @@
90 90  * Smart Cities
91 91  * Smart Factory
92 92  
93 -2. Example: Set up as LoRaWAN gateway.
73 += 2. Example: Set up as LoRaWAN gateway. =
94 94  
95 - 2.1 System structure
75 +== 2.1 System structure ==
96 96  
97 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
77 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
98 98  
99 -(% style="text-align:center" %)
100 100  [[image:1651743698677-436.png||height="457" width="686"]]
101 101  
81 +== 2.2 Hardware Installation ==
102 102  
103 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.gif]]
83 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
104 104  
105 -2.2 Hardware Installation
106 -
107 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
108 -
109 -(% style="text-align:center" %)
110 110  [[image:1651743803032-803.png]]
111 111  
112 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.gif]]
87 += 3. Install the software? =
113 113  
114 -3. Install the software?
89 +There are two ways to install software in RPi4 to use PG1302.
115 115  
116 - There are two ways to install software in RPi4 to use PG1302.
117 -
118 118  * Flash SD card with Dragino pre-build image which support Web UI.
119 119  * Install lora packet forwarder in existing RPi OS.
120 120  
121 -4. Flash with pre-build image
94 += 4. Flash with pre-build image =
122 122  
123 - 4.1 Download the dragino image for RPI
96 +== 4.1 Download the dragino image for RPI ==
124 124  
125 - Download PG1302_for_Rpi4_64_with_webui from
98 +Download PG1302_for_Rpi4_64_with_webui from
99 +[[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
126 126  
127 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
101 +== 4.2 Flash the image to SD card ==
128 128  
129 -4.2 Flash the image to SD card
103 +Flash the image to SD card:
130 130  
131 - Flash the image to SD card:
132 -
133 -(% style="text-align:center" %)
134 134  [[image:1651744119133-233.png||height="373" width="621"]]
135 135  
136 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]Note: Download the flash tool following this link
107 + Note: Download the flash tool following this link
137 137  
138 138   [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
139 139  
140 -4.3 Access the Linux console.
111 +== 4.3 Access the Linux console ==
141 141  
142 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
113 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
143 143  
144 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
145 -
146 -(% style="text-align:center" %)
147 147  [[image:1651744193675-591.png||height="450" width="466"]]
148 148  
149 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
117 +The account details for Web Login are:
150 150  
151 - The account details for Web Login are:
119 +(((
120 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
121 +)))
152 152  
153 -**~ User Name: root**
123 +(((
124 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
125 +)))
154 154  
155 -**~ Password:   dragino**
127 +(((
128 +
129 +)))
156 156  
131 +(((
132 +**~ (% style="color:#0000ff" %)Backup account(%%)**
133 +)))
157 157  
158 -**~ Backup account**
135 +(((
136 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
137 +)))
159 159  
160 -**~ Pi/dragino**
139 +After log in, you will be in the Linux console and type command here.
161 161  
162 -
163 - After log in, you will be in the Linux console and type command here.
164 -
165 -(% style="text-align:center" %)
166 166  [[image:1651744358515-107.png||height="366" width="581"]]
167 167  
168 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]] 4.4 Access the WebUI of RPi4.
143 +== 4.4 Access the WebUI of RPi4. ==
169 169  
170 - 4.4.1 Home page
145 +=== 4.4.1 Home page ===
171 171  
172 - Open a browser on the PC and type the RPI ip address
147 +Open a browser on the PC and type the RPI ip address[[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
148 +You will see the login interface of RPI as shown below.
149 +The account details for Web Login are:
173 173  
174 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
151 +(((
152 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
153 +(% style="color:#0000ff" %)** Password:   dragino**
154 +)))
175 175  
176 -
177 - You will see the login interface of RPI as shown below.
178 -
179 - The account details for Web Login are:
180 -
181 -**~ User Name: root**
182 -
183 -**~ Password:   dragino**
184 -
185 -(% style="text-align:center" %)
186 186  [[image:1651744457761-993.png||height="352" width="621"]]
187 187  
188 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
158 +=== 4.4.2 LoRa Page ===
189 189  
190 -4.4.2 LoRa Page
160 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
191 191  
192 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
193 -
194 -(% style="text-align:center" %)
195 195  [[image:1651744554845-970.png||height="328" width="621"]]
196 196  
197 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
164 +Different PG1302 hardware version can support different frequency range:
198 198  
199 - Different PG1302 hardware version can support different frequency range:
166 +➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
200 200  
201 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
168 +➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
202 202  
203 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
170 +After user choose the frequency plan, he can see the actually frequency in used by checking the
204 204  
172 +page LogRead ~-~-> LoRa Log
205 205  
206 - After user choose the frequency plan, he can see the actually frequency in used by checking the
174 +Note *: See this instruction for how to customize frequency band
207 207  
208 - page LogRead ~-~-> LoRa Log
176 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
209 209  
210 - Note *: See this instruction for how to customize frequency band
178 +=== 4.4.3 LoRaWAN Page ===
211 211  
212 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
180 +==== 4.4.3.1 Semtech UDP ====
213 213  
214 -
215 -4.4.3 LoRaWAN Page
216 -
217 - 4.4.3.1 Semtech UDP
218 -
219 -
220 -(% style="text-align:center" %)
221 221  [[image:1651744767914-283.png||height="352" width="621"]]
222 222  
184 +Note *: See this instruction for how to configure TTN.
223 223  
224 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
186 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
225 225  
226 - Note *: See this instruction for how to configure TTN.
188 +==== 4.4.3.2 Basic Station ====
227 227  
228 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
229 -
230 -
231 -4.4.3.2 Basic Station
232 -
233 -(% style="text-align:center" %)
234 234  [[image:1651744890629-683.png||height="380" width="621"]]
235 235  
236 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
192 +Note *: See this instruction for how to configure TTN.
237 237  
238 - Note *: See this instruction for how to configure TTN.
194 +[[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
239 239  
240 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
196 +=== 4.4.4 LogRead ===
241 241  
198 +==== 4.4.4.1 LoRa Log ====
242 242  
243 -4.4.4 LogRead
244 -
245 - 4.4.4.1 LoRa Log
246 -
247 -(% style="text-align:center" %)
248 248  [[image:1651744955955-452.png||height="571" width="621"]]
249 249  
250 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
202 +Show the frequency for LoRa Radio and traffics.
251 251  
252 - Show the frequency for LoRa Radio and traffics.
204 +==== 4.4.4.2 System Log ====
253 253  
206 +Show system log.
254 254  
255 -4.4.4.2 System Log
256 -
257 - Show system log.
258 -
259 -(% style="text-align:center" %)
260 260  [[image:1651745003470-264.png||height="477" width="621"]]
261 261  
210 +==== 4.4.4.3 Record Log ====
262 262  
263 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
264 -
265 -4.4.4.3 Record Log
266 -
267 -
268 268  **Record the system log.**
269 269  
270 -(% style="text-align:center" %)
271 271  [[image:1651745069814-662.png||height="144" width="621"]]
272 272  
273 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
216 += 5. Install stand alone LoRa Packet Forwarder. =
274 274  
275 -5. Install stand alone LoRa Packet Forwarder.
218 +== 5.1 OS requirement ==
276 276  
277 - 5.1 OS requirement
220 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
278 278  
279 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
280 -
281 - pi@raspberrypi:~~$ cat /etc/os-release
282 -
222 +(% class="box" %)
223 +(((
224 + pi@raspberrypi:~~$ cat /etc/os-release
283 283   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
284 -
285 285   NAME="Raspbian GNU/Linux"
286 -
287 287   VERSION_ID="8"
288 -
289 289   VERSION="8 (jessie)"
290 -
291 291   ID=raspbian
292 -
293 293   ID_LIKE=debian
294 -
295 295   HOME_URL="http:~/~/www.raspbian.org/"
296 -
297 297   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
298 -
299 299   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
234 +)))
300 300  
236 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ==
301 301  
302 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
238 +In RPI, run below command to get a Gateway ID
303 303  
304 - In RPI, run below command to get a Gateway ID
240 +(% class="box infomessage" %)
241 +(((
242 + ifconfig eth0
243 +)))
305 305  
306 - ifconfig eth0
307 -
308 -(% style="text-align:center" %)
309 309  [[image:1651745210205-512.png||height="130" width="621"]]
310 310  
311 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.gif]]
247 +(((
248 +(((
249 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
250 +)))
251 +)))
312 312  
313 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
314 -
315 -(% style="text-align:center" %)
316 316  [[image:1651745267862-321.png||height="526" width="621"]]
317 317  
318 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.jpg]]
319 -
320 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.jpg]]
321 -
322 -(% style="text-align:center" %)
323 323  [[image:1651745306744-481.png||height="478" width="621"]]
324 324  
325 -(% style="text-align:center" %)
326 -[[image:1651745366987-458.png||height="363" width="621"]]
327 -
328 328  After set up, the status should show not connected as below:
329 329  
330 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.jpg]]
259 +[[image:1651745366987-458.png||height="363" width="621"]]
331 331  
332 -5.2.1 Download and install LoRaWAN packet forwarder
261 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
333 333  
263 +Enable SPI and I2C first:
334 334  
335 - Enable SPI and I2C first:
265 +a)SPI needs to be enabled on the Raspberry Pi
336 336  
337 - a)SPI needs to be enabled on the Raspberry Pi
267 +Run (% style="background-color:#dcdcdc" %)**sudo raspi-config**(%%) to open the config window
338 338  
339 - Run sudo raspi-config to open the config window
269 +[[image:1651745476754-240.png||height="234" width="629"]]
340 340  
341 -(% style="text-align:center" %)
342 -[[image:1651745476754-240.png||height="235" width="631"]]
343 -
344 -
345 -(% style="text-align:center" %)
346 346  [[image:image-20220505181135-1.png]]
347 347  
348 -(% style="text-align:center" %)
349 -[[image:image-20220505181135-2.png]]
273 +[[image:image-20220505181135-2.png||height="229" width="622"]]
350 350  
351 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.jpg]]
275 +In RPI , Fist: Enter root account:
352 352  
353 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.jpg]]
277 +(((
278 +[[image:1651745583363-614.png||height="151" width="732"]]
279 +)))
354 354  
281 +and then run:
355 355  
283 +(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
356 356  
285 +(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
357 357  
287 +(% style="background-color:#dcdcdc" %)./auto_install.sh
358 358  
359 - In RPI , Fist: Enter root account:
289 +(((
290 +[[image:1651745611629-818.png||height="225" width="729"]]
291 +)))
360 360  
361 -(% style="text-align:center" %)
362 -[[image:1651745583363-614.png]]
293 +This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
363 363  
364 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.jpg]]
295 +You can get these output:
365 365  
366 - and then run:
367 -
368 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
369 -
370 - chmod +x ./auto_install.sh
371 -
372 - ./auto_install.sh
373 -
374 -(% style="text-align:center" %)
375 -[[image:1651745611629-818.png]]
376 -
377 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.gif]]
378 -
379 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
380 -
381 - You can get these output:
382 -
383 -(% style="text-align:center" %)
297 +(((
384 384  [[image:1651745657252-173.png||height="426" width="621"]]
299 +)))
385 385  
386 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.jpg]]
301 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
387 387  
388 -5.5.2 Config Gateway ID, Frequency Band and Server address
303 +(((
304 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
305 +)))
389 389  
390 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
307 +(((
308 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
309 +)))
391 391  
392 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
393 -
394 -(% style="text-align:center" %)
395 395  [[image:1651745709709-887.png||height="820" width="621"]]
396 396  
397 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.jpg]]
313 +User can find the TTN v3 server address from:
398 398  
399 - User can find the TTN v3 server address from:
315 +[[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
400 400  
401 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
317 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
402 402  
403 -
404 - And the default frequency band is US915 in **global_conf.json** file.
405 -
406 -(% style="text-align:center" %)
407 407  [[image:1651745838008-820.png||height="650" width="621"]]
408 408  
409 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.jpg]]
321 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
410 410  
411 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
323 + 1).Chose your need the name of region frequency.
412 412  
413 - 1).Chose your need the name of region frequency.
325 +[[image:1651745867516-322.png||height="83" width="740"]]
414 414  
415 -(% style="text-align:center" %)
416 -[[image:1651745867516-322.png]]
417 -
418 -
419 419   2). Use this command to copy it.
420 420  
421 421   cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
422 422  
423 -(% style="text-align:center" %)
424 -[[image:1651745984006-868.png]]
331 +[[image:1651745984006-868.png||height="87" width="745"]]
425 425  
426 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.jpg]]
333 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
427 427  
428 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
335 +=== 5.2.3 Check result ===
429 429  
430 -5.2.3 Check result
337 +(((
338 +Run below command to restart the dragino_fwd:
339 +)))
431 431  
432 - Run below command to restart the dragino_fwd:
341 +(((
342 +(% class="box infomessage" %)
343 +(((
344 +sudo systemctl stop draginofwd
345 +)))
433 433  
434 - sudo systemctl stop draginofwd
347 +(% class="box infomessage" %)
348 +(((
349 +sudo systemctl start draginofwd
350 +)))
351 +)))
435 435  
436 - sudo systemctl start draginofwd
353 +(((
354 +debug check the ruing status of fwd:
355 +)))
437 437  
438 - debug check the ruing status of fwd:
357 +(((
358 +(% class="box infomessage" %)
359 +(((
360 +sudo systemctl status draginofwd
361 +)))
362 +)))
439 439  
440 - sudo systemctl status draginofwd
364 +[[image:1651746045057-414.png||height="193" width="729"]]
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746045057-414.png]]
366 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
444 444  
445 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.jpg]]
446 -
447 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
448 -
449 -(% style="text-align:center" %)
450 450  [[image:1651746078253-168.png||height="372" width="621"]]
451 451  
452 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.jpg]]
453 453  
371 +We can check dragino_fwd running states in RPi by running:
454 454  
455 - We can check dragino_fwd running states in RPi by running:
373 +(% class="box infomessage" %)
374 +(((
375 +*
376 +** sudo journalctl -u draginofwd -f
377 +)))
456 456  
457 - sudo journalctl -u draginofwd -f
379 +[[image:1651746111963-838.png||height="184" width="730"]]
458 458  
459 -(% style="text-align:center" %)
460 -[[image:1651746111963-838.png]]
381 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
461 461  
462 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.gif]]
463 -
464 -
465 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
466 -
467 -(% style="text-align:center" %)
468 468  [[image:1651746139304-966.png||height="326" width="621"]]
469 469  
470 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
385 +=== 5.2.4 Commands to handle service ===
471 471  
472 -5.2.4 Commands to handle service
387 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
388 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
389 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
390 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
391 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
473 473  
474 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
475 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
476 -* **Start** dragino_fwd : sudo systemctl start draginofwd
477 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
478 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
393 += 6. Order Info =
479 479  
480 -6. Order Info
395 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
481 481  
482 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
397 +**~ (% style="color:#0000ff" %)XX:(%%)**
483 483  
484 -**~ XX:**
399 +* (% style="color:#0000ff" %)868 (%%)(For Bands: EU868,IN865)
400 +* (% style="color:#0000ff" %)915 (%%)(For Bands: US915,AU915,AS923,KR920)
401 +* (% style="color:#0000ff" %)470 (%%)(For Band: CN470)
485 485  
486 -* 868 (For Bands: EU868,IN865)
487 -* 915 (For Bands: US915,AU915,AS923,KR920)
488 -* 470 (For Band: CN470)
403 += 7. Packing Info =
489 489  
490 -7. Packing Info
405 +(((
406 +**PG1302 Package Includes**:
407 +)))
491 491  
492 -**~ PG1302 Package Includes**:
409 +(((
410 +* (((
411 +PG1302 x 1
412 +)))
413 +* (((
414 +LoRa Antenna x 1
415 +)))
416 +)))
493 493  
494 -* PG1302 x 1
495 -* LoRa Antenna x 1
418 +(((
419 +
420 +)))
496 496  
497 -**~ PG1302-PI Package Includes**:
422 +(((
423 +**PG1302-PI Package Includes**:
424 +)))
498 498  
499 -* PG1302 x 1
500 -* LoRa Antenna x 1
501 -* RPi3/4 converter PCB
502 -* Screws to hole converter PCB on RPI.
426 +* (((
427 +PG1302 x 1
428 +)))
429 +* (((
430 +LoRa Antenna x 1
431 +)))
432 +* (((
433 +RPi3/4 converter PCB
434 +)))
503 503  
504 -8. Reference
436 +(((
437 +* (((
438 +Screws to hole converter PCB on RPI.
439 +)))
505 505  
506 -* Datasheet, User Manual & Software Download:
441 += 8. Support =
507 507  
508 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
443 +(((
444 +If you are experiencing issues and can’t solve, you can send mail to
445 +)))
509 509  
447 +(((
448 +[[support@dragino.com>>mailto:support@dragino.com]]
449 +)))
510 510  
511 -9. Support
512 -
513 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
514 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
515 -
516 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
517 -
518 -
451 +(((
452 +With your question as detail as possible. We will reply and help you in the shortest.
453 +)))
454 +)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0