Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 60.1
edited by Xiaoling
on 2022/05/06 10:18
Change comment: There is no comment for this version
To version 116.1
edited by Xiaoye
on 2023/03/29 15:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -1,88 +3,84 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
9 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.gif]]
7 +**Table of Contents：**
10 10  
9 +{{toc/}}
11 11  
12 12  
13 -**PG1302 LoRaWAN Concentrator User Manual**
12 +(% class="wikigeneratedid" id="H" %)
13 +(((
14 +
15 +)))
14 14  
15 -[[image:1651796979665-130.png]]
17 += 1. Introduction =
16 16  
17 -Document Version: 1.0.0
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
18 18  
19 -Image Version: v1.0
20 20  
21 -
22 -
23 -
24 -{{toc numbered="true"/}}
25 -
26 -
27 -
28 -
29 -~1. Introduction
30 -
31 - 1.1 What is PG1302 LoRaWAN Concentrator?
32 -
33 33  (((
34 -The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
35 35  )))
36 36  
37 37  (((
38 -The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
39 39  )))
40 40  
41 41  (((
42 -PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
43 43  )))
44 44  
45 -(((
46 -(((
47 -
48 -)))
49 -)))
50 50  
51 -1.2 Features
35 +== 1.2 Features ==
52 52  
37 +
53 53  * Base on Semtech SX1302 solution
54 -* Support Raspberry Pi 3B/3B+/4
39 +* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
55 55  * Up to -140dBm sensitivity
56 56  * Support 3.3v and 5v.
57 57  * Mini-PCIe Interface
58 58  * Converter board to support Raspberry Pi
59 59  
60 -1.3 General Interfaces
61 61  
46 +== 1.3 General Interfaces for PG1302 ==
47 +
48 +
62 62  * SPI interface for LoRa
63 63  * Power Input: 5v, 1A
64 64  * 1 x I-PEX for LoRa
52 +* Working Temperature: -40 ℃ ~~ 80℃
65 65  
66 -1.4 Pin Mapping
67 67  
55 +== 1.4 Pin Mapping ==
56 +
57 +
68 68   [[image:1651743282627-547.png||height="402" width="425"]]
69 69  
70 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.gif]]
71 71  
72 -1.5 LEDs
61 +== 1.5 LEDs ==
73 73  
74 - TX: Blink when transmit a packet
75 75  
76 - RX: Blink when receive a packet
64 +(((
65 +TX: Blink when transmit a packet
66 +RX: Blink when receive a packet
67 +Config: Always ON
68 +)))
77 77  
78 - Config: Always ON
79 79  
80 -1.6 Power Consumption
71 +== 1.6 Power Consumption ==
81 81  
82 - TBD
83 83  
84 -1.7 Applications
74 +<300mA @ 3.3v.
85 85  
76 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
77 +
78 +
79 +== 1.7 Applications ==
80 +
81 +
86 86  * Smart Buildings & Home Automation
87 87  * Logistics and Supply Chain Management
88 88  * Smart Metering
... ... @@ -90,430 +90,493 @@
90 90  * Smart Cities
91 91  * Smart Factory
92 92  
93 -2. Example: Set up as LoRaWAN gateway.
94 94  
95 - 2.1 System structure
90 += 2. Example: Set up as LoRaWAN gateway =
96 96  
97 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
92 +== 2.1 System structure ==
98 98  
99 -(% style="text-align:center" %)
94 +
95 +(((
96 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
97 +
98 +
99 +)))
100 +
100 100  [[image:1651743698677-436.png||height="457" width="686"]]
101 101  
102 102  
103 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.gif]]
104 +== 2.2 Hardware Installation ==
104 104  
105 -2.2 Hardware Installation
106 106  
107 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
107 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
108 108  
109 -(% style="text-align:center" %)
110 -[[image:1651743803032-803.png]]
109 +[[image:image-20220621104746-1.png||height="381" width="451"]]
111 111  
112 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.gif]]
113 113  
114 -3. Install the software?
112 += 3. Install the software? =
115 115  
116 - There are two ways to install software in RPi4 to use PG1302.
117 117  
118 -* Flash SD card with Dragino pre-build image which support Web UI.
119 -* Install lora packet forwarder in existing RPi OS.
115 +**Raspberry Pi 3B/3B+/4,**
120 120  
121 -4. Flash with pre-build image
117 +* Flash SD card with Dragino pre-build image which supports Web UI.
118 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
122 122  
123 - 4.1 Download the dragino image for RPI
120 +**TinkerBoard2/2S, **
124 124  
125 - Download PG1302_for_Rpi4_64_with_webui from
122 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
126 126  
127 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
124 +**Orange Pi PC/PC PLUS.**
128 128  
129 -4.2 Flash the image to SD card
126 +* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
130 130  
131 - Flash the image to SD card:
132 132  
133 -(% style="text-align:center" %)
134 -[[image:1651744119133-233.png||height="373" width="621"]]
129 += 4. Flash with pre-build image =
135 135  
136 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]Note: Download the flash tool following this link
131 +== 4.1 Download the dragino image for RPI ==
137 137  
138 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
139 139  
140 -4.3 Access the Linux console.
134 +(((
135 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
136 +)))
141 141  
142 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
143 143  
144 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
139 +== 4.2 Flash the image to an SD card ==
145 145  
146 -(% style="text-align:center" %)
147 -[[image:1651744193675-591.png||height="450" width="466"]]
148 148  
149 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
142 +Flash the image to the SD card:
150 150  
151 - The account details for Web Login are:
144 +[[image:1651744119133-233.png||height="373" width="621"]]
152 152  
153 -**~ User Name: root**
154 154  
155 -**~ Password:   dragino**
147 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
156 156  
157 157  
158 -**~ Backup account**
150 +== 4.3 Access the Linux console ==
159 159  
160 -**~ Pi/dragino**
161 161  
153 +(((
154 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
155 +)))
162 162  
163 - After log in, you will be in the Linux console and type command here.
164 164  
165 -(% style="text-align:center" %)
166 -[[image:1651744358515-107.png||height="366" width="581"]]
158 +[[image:1651744193675-591.png||height="450" width="466"]]
167 167  
168 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]] 4.4 Access the WebUI of RPi4.
160 +The account details for Web Login are:
169 169  
170 - 4.4.1 Home page
162 +(((
163 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
164 +)))
171 171  
172 - Open a browser on the PC and type the RPI ip address
166 +(((
167 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
168 +)))
173 173  
174 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
170 +(((
171 +
172 +)))
175 175  
174 +(((
175 +**~ (% style="color:#0000ff" %)Backup account(%%)**
176 +)))
176 176  
177 - You will see the login interface of RPI as shown below.
178 +(((
179 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
178 178  
179 - The account details for Web Login are:
181 +
182 +)))
180 180  
181 -**~ User Name: root**
184 +After logging in, you will be in the Linux console and type the command here.
182 182  
183 -**~ Password:   dragino**
186 +[[image:1651744358515-107.png||height="366" width="581"]]
184 184  
185 -(% style="text-align:center" %)
186 -[[image:1651744457761-993.png||height="352" width="621"]]
187 187  
188 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
189 +== 4.4 Access the WebUI of RPi4 ==
189 189  
190 -4.4.2 LoRa Page
191 +=== 4.4.1 Home page ===
191 191  
192 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
193 193  
194 -(% style="text-align:center" %)
195 -[[image:1651744554845-970.png||height="328" width="621"]]
194 +(((
195 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
196 +You will see the login interface of RPI as shown below.
197 +The account details for Web Login are:
198 +)))
196 196  
197 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
200 +(((
201 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
202 +(% style="color:#0000ff" %)** Password:   dragino**
198 198  
199 - Different PG1302 hardware version can support different frequency range:
204 +
205 +)))
200 200  
201 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
207 +[[image:1651744457761-993.png||height="352" width="621"]]
202 202  
203 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
204 204  
210 +=== 4.4.2 LoRa Page ===
205 205  
206 - After user choose the frequency plan, he can see the actually frequency in used by checking the
207 207  
208 - page LogRead ~-~-> LoRa Log
213 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
209 209  
210 - Note *: See this instruction for how to customize frequency band
211 211  
212 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
216 +[[image:1651744554845-970.png||height="328" width="621"]]
213 213  
214 214  
215 -4.4.3 LoRaWAN Page
219 +Different PG1302 hardware version can support different frequency range:
216 216  
217 - 4.4.3.1 Semtech UDP
221 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
222 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
218 218  
224 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
219 219  
220 -(% style="text-align:center" %)
221 -[[image:1651744767914-283.png||height="352" width="621"]]
226 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
222 222  
223 223  
224 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
229 +=== 4.4.3 LoRaWAN Page ===
225 225  
226 - Note *: See this instruction for how to configure TTN.
231 +==== 4.4.3.1 Semtech UDP ====
227 227  
228 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
229 229  
234 +[[image:1651744767914-283.png||height="352" width="621"]]
230 230  
231 -4.4.3.2 Basic Station
232 232  
233 -(% style="text-align:center" %)
237 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
238 +
239 +
240 +==== 4.4.3.2 Basic Station ====
241 +
242 +
234 234  [[image:1651744890629-683.png||height="380" width="621"]]
235 235  
236 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
237 237  
238 - Note *: See this instruction for how to configure TTN.
246 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
239 239  
240 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
241 241  
249 +=== 4.4.4 LogRead ===
242 242  
243 -4.4.4 LogRead
251 +==== 4.4.4.1 LoRa Log ====
244 244  
245 - 4.4.4.1 LoRa Log
246 246  
247 -(% style="text-align:center" %)
248 248  [[image:1651744955955-452.png||height="571" width="621"]]
249 249  
250 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
251 251  
252 - Show the frequency for LoRa Radio and traffics.
257 +Show the frequency for LoRa Radio and traffics.
253 253  
254 254  
255 -4.4.4.2 System Log
260 +==== 4.4.4.2 System Log ====
256 256  
257 - Show system log.
258 258  
259 -(% style="text-align:center" %)
260 -[[image:1651745003470-264.png||height="477" width="621"]]
263 +Show system log.
261 261  
262 262  
263 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
266 +[[image:1651745003470-264.png||height="477" width="621"]]
264 264  
265 -4.4.4.3 Record Log
266 266  
269 +==== 4.4.4.3 Record Log ====
267 267  
271 +
268 268  **Record the system log.**
269 269  
270 -(% style="text-align:center" %)
274 +
271 271  [[image:1651745069814-662.png||height="144" width="621"]]
272 272  
273 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
274 274  
275 -5. Install stand alone LoRa Packet Forwarder.
278 += 5. Install stand-alone LoRa Packet Forwarder =
276 276  
277 - 5.1 OS requirement
280 +== 5.1 Choose the right installation package for your OS ==
278 278  
279 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
280 280  
281 - pi@raspberrypi:~~$ cat /etc/os-release
283 +(((
284 +**draginofwd-32bit (RPI, Orange PI)**
282 282  
283 - PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
286 +**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
284 284  
285 - NAME="Raspbian GNU/Linux"
288 +**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
286 286  
287 - VERSION_ID="8"
288 288  
289 - VERSION="8 (jessie)"
291 +**dragino-64bit (RPI, Orange PI)**
290 290  
291 - ID=raspbian
293 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
294 +)))
292 292  
293 - ID_LIKE=debian
296 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
294 294  
295 - HOME_URL="http:~/~/www.raspbian.org/"
296 296  
297 - SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
299 +**dragino-tiker-32bit (Tinker Board)**
298 298  
301 +**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
302 +
303 +**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
304 +
305 +
306 +**Install details:**
307 +
308 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
309 +
310 +
311 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
312 +
313 +(% class="box" %)
314 +(((
315 + pi@raspberrypi:~~$ cat /etc/os-release
316 + PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
317 + NAME="Raspbian GNU/Linux"
318 + VERSION_ID="8"
319 + VERSION="8 (jessie)"
320 + ID=raspbian
321 + ID_LIKE=debian
322 + HOME_URL="http:~/~/www.raspbian.org/"
323 + SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
299 299   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
300 300  
326 +
327 +)))
301 301  
302 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
303 303  
304 - In RPI, run below command to get a Gateway ID
330 +5.2 Select the mode of connection to the server
305 305  
306 - ifconfig eth0
307 307  
308 -(% style="text-align:center" %)
309 -[[image:1651745210205-512.png||height="130" width="621"]]
333 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3 ==
310 310  
311 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.gif]]
312 312  
313 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
336 +In RPI, run the below command to get a Gateway ID
314 314  
315 -(% style="text-align:center" %)
316 -[[image:1651745267862-321.png||height="526" width="621"]]
338 +(% class="box infomessage" %)
339 +(((
340 +**~ ifconfig eth0**
341 +)))
317 317  
318 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.jpg]]
343 +[[image:1651745210205-512.png||height="130" width="621"]]
319 319  
320 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.jpg]]
321 321  
322 -(% style="text-align:center" %)
346 +(((
347 +(((
348 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
349 +
350 +
351 +)))
352 +)))
353 +
354 +[[image:1651745267862-321.png||height="526" width="621"]]
355 +
323 323  [[image:1651745306744-481.png||height="478" width="621"]]
324 324  
325 -(% style="text-align:center" %)
326 -[[image:1651745366987-458.png||height="363" width="621"]]
327 327  
328 328  After set up, the status should show not connected as below:
329 329  
330 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.jpg]]
361 +[[image:1651745366987-458.png||height="363" width="621"]]
331 331  
332 -5.2.1 Download and install LoRaWAN packet forwarder
333 333  
364 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
334 334  
335 - Enable SPI and I2C first:
336 336  
337 - a)SPI needs to be enabled on the Raspberry Pi
367 +Enable SPI and I2C first:
338 338  
339 - Run sudo raspi-config to open the config window
369 +a)  SPI needs to be enabled on the Raspberry Pi
340 340  
341 -(% style="text-align:center" %)
342 -[[image:1651745476754-240.png||height="235" width="631"]]
371 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
343 343  
373 +[[image:1651745476754-240.png||height="234" width="629"]]
344 344  
345 -(% style="text-align:center" %)
375 +
346 346  [[image:image-20220505181135-1.png]]
347 347  
348 -(% style="text-align:center" %)
349 -[[image:image-20220505181135-2.png]]
350 350  
351 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.jpg]]
379 +[[image:image-20220505181135-2.png||height="229" width="622"]]
352 352  
353 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.jpg]]
354 354  
355 355  
383 +In RPI, Fist: Enter the root account:
356 356  
385 +(((
386 +[[image:1651745583363-614.png||height="151" width="732"]]
357 357  
388 +
389 +)))
358 358  
359 - In RPI , Fist: Enter root account:
360 360  
361 -(% style="text-align:center" %)
362 -[[image:1651745583363-614.png]]
392 +=== 5.2.2 Select the appropriate device version to download: ===
363 363  
364 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.jpg]]
365 365  
366 - and then run:
367 367  
368 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
396 +(((
397 +
369 369  
370 - chmod +x ./auto_install.sh
371 371  
372 - ./auto_install.sh
400 +
401 +)))
373 373  
374 -(% style="text-align:center" %)
375 -[[image:1651745611629-818.png]]
403 +=== 5.2.3 Config Gateway ID, Frequency Band and Server address ===
376 376  
377 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.gif]]
378 378  
379 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
406 +(((
407 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
408 +)))
380 380  
381 - You can get these output:
410 +(((
411 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
382 382  
383 -(% style="text-align:center" %)
384 -[[image:1651745657252-173.png||height="426" width="621"]]
413 +
414 +)))
385 385  
386 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.jpg]]
416 +[[image:1651745709709-887.png||height="820" width="621"]]
387 387  
388 -5.5.2 Config Gateway ID, Frequency Band and Server address
389 389  
390 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
419 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
391 391  
392 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
421 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
393 393  
394 -(% style="text-align:center" %)
395 -[[image:1651745709709-887.png||height="820" width="621"]]
423 +[[image:1651745838008-820.png||height="650" width="621"]]
396 396  
397 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.jpg]]
398 398  
399 - User can find the TTN v3 server address from:
426 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
400 400  
401 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
428 +**~ 1). Chose your need the name of region frequency.**
402 402  
403 403  
404 - And the default frequency band is US915 in **global_conf.json** file.
431 +[[image:1651745867516-322.png||height="83" width="740"]]
405 405  
406 -(% style="text-align:center" %)
407 -[[image:1651745838008-820.png||height="650" width="621"]]
408 408  
409 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.jpg]]
410 410  
411 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
435 +**~ 2). Use this command to copy it.**
412 412  
413 - 1).Chose your need the name of region frequency.
437 +(% class="box infomessage" %)
438 +(((
439 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
440 +)))
414 414  
415 -(% style="text-align:center" %)
416 -[[image:1651745867516-322.png]]
442 +[[image:1651745984006-868.png||height="87" width="745"]]
417 417  
418 418  
419 - 2). Use this command to copy it.
445 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
420 420  
421 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
422 422  
423 -(% style="text-align:center" %)
424 -[[image:1651745984006-868.png]]
448 +=== 5.2.4 Check result ===
425 425  
426 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.jpg]]
427 427  
428 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
451 +(((
452 +Run below command to restart the dragino_fwd:
453 +)))
429 429  
430 -5.2.3 Check result
455 +(((
456 +(% class="box infomessage" %)
457 +(((
458 +**sudo systemctl stop draginofwd**
459 +)))
431 431  
432 - Run below command to restart the dragino_fwd:
461 +(% class="box infomessage" %)
462 +(((
463 +**sudo systemctl start draginofwd**
464 +)))
465 +)))
433 433  
434 - sudo systemctl stop draginofwd
435 435  
436 - sudo systemctl start draginofwd
468 +(((
469 +debug check the ruing status of fwd:
470 +)))
437 437  
438 - debug check the ruing status of fwd:
472 +(((
473 +(% class="box infomessage" %)
474 +(((
475 +**sudo systemctl status draginofwd**
476 +)))
477 +)))
439 439  
440 - sudo systemctl status draginofwd
479 +[[image:1651746045057-414.png||height="193" width="729"]]
441 441  
442 -(% style="text-align:center" %)
443 -[[image:1651746045057-414.png]]
444 444  
445 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.jpg]]
446 446  
447 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
483 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
448 448  
449 -(% style="text-align:center" %)
485 +
450 450  [[image:1651746078253-168.png||height="372" width="621"]]
451 451  
452 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.jpg]]
453 453  
454 454  
455 - We can check dragino_fwd running states in RPi by running:
490 +We can check dragino_fwd running states in RPi by running:
456 456  
457 - sudo journalctl -u draginofwd -f
492 +(% class="box infomessage" %)
493 +(((
494 +**~ sudo journalctl -u draginofwd -f**
495 +)))
458 458  
459 -(% style="text-align:center" %)
460 -[[image:1651746111963-838.png]]
497 +[[image:1651746111963-838.png||height="184" width="730"]]
461 461  
462 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.gif]]
463 463  
464 464  
465 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
501 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
466 466  
467 -(% style="text-align:center" %)
468 468  [[image:1651746139304-966.png||height="326" width="621"]]
469 469  
470 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
471 471  
472 -5.2.4 Commands to handle service
506 +=== 5.2.5 Commands to handle service ===
473 473  
474 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
475 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
476 -* **Start** dragino_fwd : sudo systemctl start draginofwd
477 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
478 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
479 479  
480 -6. Order Info
509 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
510 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
511 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
512 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
513 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
481 481  
482 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
483 483  
484 -**~ XX:**
516 += 6. Order Info =
485 485  
486 -* 868 (For Bands: EU868,IN865)
487 -* 915 (For Bands: US915,AU915,AS923,KR920)
488 -* 470 (For Band: CN470)
489 489  
490 -7. Packing Info
519 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
491 491  
492 -**~ PG1302 Package Includes**:
521 +**~ (% style="color:#0000ff" %)XX:(%%)**
493 493  
523 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
524 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
525 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
526 +
527 +
528 += 7. Packing Info =
529 +
530 +(((
531 +
532 +
533 +**PG1302 Package Includes**:
534 +)))
535 +
536 +(((
537 +(((
494 494  * PG1302 x 1
495 495  * LoRa Antenna x 1
540 +)))
541 +)))
496 496  
497 -**~ PG1302-PI Package Includes**:
543 +(((
544 +
498 498  
546 +**PG1302-PI Package Includes**:
547 +)))
548 +
499 499  * PG1302 x 1
500 500  * LoRa Antenna x 1
501 501  * RPi3/4 converter PCB
502 502  * Screws to hole converter PCB on RPI.
503 503  
504 -8. Reference
554 +**PG1302-PI Dimension and weight: **
505 505  
506 -* Datasheet, User Manual & Software Download:
556 +* Device Size: 18 x 8 x 4 cm
557 +* Weight: 150g
507 507  
508 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
509 509  
560 +(((
561 += 8. Support =
510 510  
511 -9. Support
512 512  
513 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
514 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
564 +(((
565 +If you are experiencing issues and can't solve, you can send mail to
566 +)))
515 515  
516 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
568 +(((
569 +[[support@dragino.com>>mailto:support@dragino.com]]
570 +)))
517 517  
572 +(((
573 +With your question as detail as possible. We will reply and help you in the shortest.
518 518  
575 +
519 519  
577 +)))
578 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content