Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 46.1
edited by Xiaoling
on 2022/05/06 09:03
Change comment: There is no comment for this version
To version 110.2
edited by Xiaoling
on 2022/12/21 09:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302
1 +PG1302 - LoRaWAN Concentrator User Manual
Content
... ... @@ -1,44 +3,40 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
2 +[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
5 5  
6 6  
7 7  
8 8  
9 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.gif]]
7 +**Table of Contents：**
10 10  
9 +{{toc/}}
11 11  
12 12  
13 -**PG1302 LoRaWAN Concentrator User Manual**
12 +(% class="wikigeneratedid" id="H" %)
13 +(((
14 +
15 +)))
14 14  
15 -[[image:1651796979665-130.png]]
17 += 1. Introduction =
16 16  
17 -Document Version: 1.0.0
19 +== 1.1 What is PG1302 LoRaWAN Concentrator? ==
18 18  
19 -Image Version: v1.0
20 20  
22 +(((
23 +The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 +)))
21 21  
26 +(((
27 +The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
28 +)))
22 22  
30 +(((
31 +PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
32 +)))
23 23  
24 -{{toc numbered="true"/}}
25 25  
35 +== 1.2 Features ==
26 26  
27 27  
28 -
29 -~1. Introduction
30 -
31 - 1.1 What is PG1302 LoRaWAN Concentrator?
32 -
33 - The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of  distances.
34 -
35 - The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately  interfered environment.
36 -
37 - PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the  exist OS.
38 -
39 -
40 -1.2 Features
41 -
42 42  * Base on Semtech SX1302 solution
43 43  * Support Raspberry Pi 3B/3B+/4
44 44  * Up to -140dBm sensitivity
... ... @@ -46,32 +46,46 @@
46 46  * Mini-PCIe Interface
47 47  * Converter board to support Raspberry Pi
48 48  
49 -1.3 General Interfaces
50 50  
46 +
47 +== 1.3 General Interfaces for PG1302 ==
48 +
49 +
51 51  * SPI interface for LoRa
52 52  * Power Input: 5v, 1A
53 53  * 1 x I-PEX for LoRa
53 +* Working Temperature: -40 ℃ ~~ 65℃
54 54  
55 -1.4 Pin Mapping
56 56  
56 +
57 +== 1.4 Pin Mapping ==
58 +
59 +
57 57   [[image:1651743282627-547.png||height="402" width="425"]]
58 58  
59 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.gif]]
60 60  
61 -1.5 LEDs
62 62  
63 - TX: Blink when transmit a packet
64 +== 1.5 LEDs ==
64 64  
65 - RX: Blink when receive a packet
66 66  
67 - Config: Always ON
67 +(((
68 +TX: Blink when transmit a packet
69 +RX: Blink when receive a packet
70 +Config: Always ON
71 +)))
68 68  
69 -1.6 Power Consumption
70 70  
71 - TBD
74 +== 1.6 Power Consumption ==
72 72  
73 -1.7 Applications
74 74  
77 +<300mA @ 3.3v.
78 +
79 +Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
80 +
81 +
82 +== 1.7 Applications ==
83 +
84 +
75 75  * Smart Buildings & Home Automation
76 76  * Logistics and Supply Chain Management
77 77  * Smart Metering
... ... @@ -79,430 +79,480 @@
79 79  * Smart Cities
80 80  * Smart Factory
81 81  
82 -2. Example: Set up as LoRaWAN gateway.
83 83  
84 - 2.1 System structure
85 85  
86 - This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
94 += 2. Example: Set up as LoRaWAN gateway =
87 87  
88 -(% style="text-align:center" %)
96 +== 2.1 System structure ==
97 +
98 +
99 +(((
100 +This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
101 +
102 +
103 +)))
104 +
89 89  [[image:1651743698677-436.png||height="457" width="686"]]
90 90  
91 91  
92 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.gif]]
93 93  
94 -2.2 Hardware Installation
109 +== 2.2 Hardware Installation ==
95 95  
96 -**~ Important Notice: **Please power the RPI with 5V,3A cable.
97 97  
98 -(% style="text-align:center" %)
99 -[[image:1651743803032-803.png]]
112 +(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
100 100  
101 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.gif]]
114 +[[image:image-20220621104746-1.png||height="381" width="451"]]
102 102  
103 -3. Install the software?
104 104  
105 - There are two ways to install software in RPi4 to use PG1302.
106 106  
107 -* Flash SD card with Dragino pre-build image which support Web UI.
108 -* Install lora packet forwarder in existing RPi OS.
118 += 3. Install the software? =
109 109  
110 -4. Flash with pre-build image
111 111  
112 - 4.1 Download the dragino image for RPI
121 +There are two ways to install the software in RPi4 to use PG1302.
113 113  
114 - Download PG1302_for_Rpi4_64_with_webui from
123 +* Flash SD card with Dragino pre-build image which supports Web UI.
124 +* Install Lora packet forwarder in existing RPi OS.
115 115  
116 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
117 117  
118 -4.2 Flash the image to SD card
119 119  
120 - Flash the image to SD card:
128 += 4. Flash with pre-build image =
121 121  
122 -(% style="text-align:center" %)
123 -[[image:1651744119133-233.png||height="373" width="621"]]
130 +== 4.1 Download the dragino image for RPI ==
124 124  
125 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]Note: Download the flash tool following this link
126 126  
127 - [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
133 +(((
134 +Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
135 +)))
128 128  
129 -4.3 Access the Linux console.
130 130  
131 - Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
138 +== 4.2 Flash the image to an SD card ==
132 132  
133 - Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
134 134  
135 -(% style="text-align:center" %)
136 -[[image:1651744193675-591.png||height="450" width="466"]]
141 +Flash the image to the SD card:
137 137  
138 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
143 +[[image:1651744119133-233.png||height="373" width="621"]]
139 139  
140 - The account details for Web Login are:
141 141  
142 -**~ User Name: root**
146 +(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
143 143  
144 -**~ Password:   dragino**
145 145  
149 +== 4.3 Access the Linux console ==
146 146  
147 -**~ Backup account**
148 148  
149 -**~ Pi/dragino**
152 +(((
153 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
154 +)))
150 150  
151 151  
152 - After log in, you will be in the Linux console and type command here.
157 +[[image:1651744193675-591.png||height="450" width="466"]]
153 153  
154 -(% style="text-align:center" %)
155 -[[image:1651744358515-107.png||height="366" width="581"]]
159 +The account details for Web Login are:
156 156  
157 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]] 4.4 Access the WebUI of RPi4.
161 +(((
162 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
163 +)))
158 158  
159 - 4.4.1 Home page
165 +(((
166 +**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
167 +)))
160 160  
161 - Open a browser on the PC and type the RPI ip address
169 +(((
170 +
171 +)))
162 162  
163 - [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
173 +(((
174 +**~ (% style="color:#0000ff" %)Backup account(%%)**
175 +)))
164 164  
177 +(((
178 +**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
165 165  
166 - You will see the login interface of RPI as shown below.
180 +
181 +)))
167 167  
168 - The account details for Web Login are:
183 +After logging in, you will be in the Linux console and type the command here.
169 169  
170 -**~ User Name: root**
185 +[[image:1651744358515-107.png||height="366" width="581"]]
171 171  
172 -**~ Password:   dragino**
173 173  
174 -(% style="text-align:center" %)
175 -[[image:1651744457761-993.png||height="352" width="621"]]
188 +== 4.4 Access the WebUI of RPi4 ==
176 176  
177 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
190 +=== 4.4.1 Home page ===
178 178  
179 -4.4.2 LoRa Page
180 180  
181 - This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
193 +(((
194 +Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
195 +You will see the login interface of RPI as shown below.
196 +The account details for Web Login are:
197 +)))
182 182  
183 -(% style="text-align:center" %)
184 -[[image:1651744554845-970.png||height="328" width="621"]]
199 +(((
200 +**~ (% style="color:#0000ff" %)User Name: root(%%)**
201 +(% style="color:#0000ff" %)** Password:   dragino**
185 185  
186 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
203 +
204 +)))
187 187  
188 - Different PG1302 hardware version can support different frequency range:
206 +[[image:1651744457761-993.png||height="352" width="621"]]
189 189  
190 - ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
191 191  
192 - ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
209 +=== 4.4.2 LoRa Page ===
193 193  
194 194  
195 - After user choose the frequency plan, he can see the actually frequency in used by checking the
212 +This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
196 196  
197 - page LogRead ~-~-> LoRa Log
198 198  
199 - Note *: See this instruction for how to customize frequency band
215 +[[image:1651744554845-970.png||height="328" width="621"]]
200 200  
201 - [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
202 202  
218 +Different PG1302 hardware version can support different frequency range:
203 203  
204 -4.4.3 LoRaWAN Page
220 +* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
221 +* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
205 205  
206 - 4.4.3.1 Semtech UDP
223 +After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
207 207  
225 +(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
208 208  
209 -(% style="text-align:center" %)
210 -[[image:1651744767914-283.png||height="352" width="621"]]
211 211  
228 +=== 4.4.3 LoRaWAN Page ===
212 212  
213 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
230 +==== 4.4.3.1 Semtech UDP ====
214 214  
215 - Note *: See this instruction for how to configure TTN.
216 216  
217 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
233 +[[image:1651744767914-283.png||height="352" width="621"]]
218 218  
219 219  
220 -4.4.3.2 Basic Station
236 +(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
221 221  
222 -(% style="text-align:center" %)
238 +
239 +==== 4.4.3.2 Basic Station ====
240 +
241 +
223 223  [[image:1651744890629-683.png||height="380" width="621"]]
224 224  
225 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
226 226  
227 - Note *: See this instruction for how to configure TTN.
245 +(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
228 228  
229 - [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
230 230  
248 +=== 4.4.4 LogRead ===
231 231  
232 -4.4.4 LogRead
250 +==== 4.4.4.1 LoRa Log ====
233 233  
234 - 4.4.4.1 LoRa Log
235 235  
236 -(% style="text-align:center" %)
237 237  [[image:1651744955955-452.png||height="571" width="621"]]
238 238  
239 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
240 240  
241 - Show the frequency for LoRa Radio and traffics.
256 +Show the frequency for LoRa Radio and traffics.
242 242  
243 243  
244 -4.4.4.2 System Log
259 +==== 4.4.4.2 System Log ====
245 245  
246 - Show system log.
247 247  
248 -(% style="text-align:center" %)
249 -[[image:1651745003470-264.png||height="477" width="621"]]
262 +Show system log.
250 250  
251 251  
252 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
265 +[[image:1651745003470-264.png||height="477" width="621"]]
253 253  
254 -4.4.4.3 Record Log
255 255  
268 +==== 4.4.4.3 Record Log ====
256 256  
270 +
257 257  **Record the system log.**
258 258  
259 -(% style="text-align:center" %)
273 +
260 260  [[image:1651745069814-662.png||height="144" width="621"]]
261 261  
262 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
263 263  
264 -5. Install stand alone LoRa Packet Forwarder.
277 += 5. Install stand-alone LoRa Packet Forwarder =
265 265  
266 - 5.1 OS requirement
279 +== 5.1 OS requirement ==
267 267  
268 - RPI in this example is RPI model 4B with fresh Raspbian OS install.
269 269  
270 - pi@raspberrypi:~~$ cat /etc/os-release
282 +RPI in this example is RPI model 4B with fresh Raspbian OS install.
271 271  
284 +(% class="box" %)
285 +(((
286 + pi@raspberrypi:~~$ cat /etc/os-release
272 272   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
273 -
274 274   NAME="Raspbian GNU/Linux"
275 -
276 276   VERSION_ID="8"
277 -
278 278   VERSION="8 (jessie)"
279 -
280 280   ID=raspbian
281 -
282 282   ID_LIKE=debian
283 -
284 284   HOME_URL="http:~/~/www.raspbian.org/"
285 -
286 286   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
287 -
288 288   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
289 289  
297 +
298 +)))
290 290  
291 -5.2 Get Gateway ID in Raspberry and input this in TTN v3.
292 292  
293 - In RPI, run below command to get a Gateway ID
301 +== 5.2 Get Gateway ID in Raspberry and input this in TTN v3 ==
294 294  
295 - ifconfig eth0
296 296  
297 -(% style="text-align:center" %)
298 -[[image:1651745210205-512.png||height="130" width="621"]]
304 +In RPI, run the below command to get a Gateway ID
299 299  
300 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.gif]]
306 +(% class="box infomessage" %)
307 +(((
308 +**~ ifconfig eth0**
309 +)))
301 301  
302 - We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
311 +[[image:1651745210205-512.png||height="130" width="621"]]
303 303  
304 -(% style="text-align:center" %)
305 -[[image:1651745267862-321.png||height="526" width="621"]]
306 306  
307 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.jpg]]
314 +(((
315 +(((
316 +We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
308 308  
309 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.jpg]]
318 +
319 +)))
320 +)))
310 310  
311 -(% style="text-align:center" %)
322 +[[image:1651745267862-321.png||height="526" width="621"]]
323 +
312 312  [[image:1651745306744-481.png||height="478" width="621"]]
313 313  
314 -(% style="text-align:center" %)
315 -[[image:1651745366987-458.png||height="363" width="621"]]
316 316  
317 317  After set up, the status should show not connected as below:
318 318  
319 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.jpg]]
329 +[[image:1651745366987-458.png||height="363" width="621"]]
320 320  
321 -5.2.1 Download and install LoRaWAN packet forwarder
322 322  
332 +=== 5.2.1 Download and install LoRaWAN packet forwarder ===
323 323  
324 - Enable SPI and I2C first:
325 325  
326 - a)SPI needs to be enabled on the Raspberry Pi
335 +Enable SPI and I2C first:
327 327  
328 - Run sudo raspi-config to open the config window
337 +a)  SPI needs to be enabled on the Raspberry Pi
329 329  
330 -(% style="text-align:center" %)
331 -[[image:1651745476754-240.png||height="235" width="631"]]
339 +Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
332 332  
341 +[[image:1651745476754-240.png||height="234" width="629"]]
333 333  
334 -(% style="text-align:center" %)
343 +
335 335  [[image:image-20220505181135-1.png]]
336 336  
337 -(% style="text-align:center" %)
338 -[[image:image-20220505181135-2.png]]
339 339  
340 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.jpg]]
347 +[[image:image-20220505181135-2.png||height="229" width="622"]]
341 341  
342 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.jpg]]
343 343  
344 344  
351 +In RPI, Fist: Enter the root account:
345 345  
353 +(((
354 +[[image:1651745583363-614.png||height="151" width="732"]]
346 346  
356 +
357 +)))
347 347  
348 - In RPI , Fist: Enter root account:
349 349  
350 -(% style="text-align:center" %)
351 -[[image:1651745583363-614.png]]
360 +**Select the appropriate device version to download:**
352 352  
353 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.jpg]]
354 354  
355 - and then run:
363 +(((
364 +**draginofwd-32bit**
356 356  
357 - wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
366 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
358 358  
359 - chmod +x ./auto_install.sh
360 360  
361 - ./auto_install.sh
369 +**dragino-64bit**
370 +)))
362 362  
363 -(% style="text-align:center" %)
364 -[[image:1651745611629-818.png]]
372 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
365 365  
366 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.gif]]
367 367  
368 - This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
375 +**dragino-tiker-32bit**
369 369  
370 - You can get these output:
377 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
371 371  
372 -(% style="text-align:center" %)
373 -[[image:1651745657252-173.png||height="426" width="621"]]
374 374  
375 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.jpg]]
380 +(((
381 +
376 376  
377 -5.5.2 Config Gateway ID, Frequency Band and Server address
383 +[[image:image-20220928181226-1.png||height="218" width="1100"]]
378 378  
379 - After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
385 +
386 +)))
380 380  
381 - The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
388 +=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
382 382  
383 -(% style="text-align:center" %)
384 -[[image:1651745709709-887.png||height="820" width="621"]]
385 385  
386 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.jpg]]
391 +(((
392 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
393 +)))
387 387  
388 - User can find the TTN v3 server address from:
395 +(((
396 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
389 389  
390 - [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
398 +
399 +)))
391 391  
401 +[[image:1651745709709-887.png||height="820" width="621"]]
392 392  
393 - And the default frequency band is US915 in **global_conf.json** file.
394 394  
395 -(% style="text-align:center" %)
404 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
405 +
406 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
407 +
396 396  [[image:1651745838008-820.png||height="650" width="621"]]
397 397  
398 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.jpg]]
399 399  
400 -* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
411 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
401 401  
402 - 1).Chose your need the name of region frequency.
413 +**~ 1). Chose your need the name of region frequency.**
403 403  
404 -(% style="text-align:center" %)
405 -[[image:1651745867516-322.png]]
406 406  
416 +[[image:1651745867516-322.png||height="83" width="740"]]
407 407  
408 - 2). Use this command to copy it.
409 409  
410 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
411 411  
412 -(% style="text-align:center" %)
413 -[[image:1651745984006-868.png]]
420 +**~ 2). Use this command to copy it.**
414 414  
415 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.jpg]]
422 +(% class="box infomessage" %)
423 +(((
424 +**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
425 +)))
416 416  
417 -* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
427 +[[image:1651745984006-868.png||height="87" width="745"]]
418 418  
419 -5.2.3 Check result
420 420  
421 - Run below command to restart the dragino_fwd:
430 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
422 422  
423 - sudo systemctl stop draginofwd
424 424  
425 - sudo systemctl start draginofwd
426 426  
427 - debug check the ruing status of fwd:
434 +=== 5.2.3 Check result ===
428 428  
429 - sudo systemctl status draginofwd
430 430  
431 -(% style="text-align:center" %)
432 -[[image:1651746045057-414.png]]
437 +(((
438 +Run below command to restart the dragino_fwd:
439 +)))
433 433  
434 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.jpg]]
441 +(((
442 +(% class="box infomessage" %)
443 +(((
444 +**sudo systemctl stop draginofwd**
445 +)))
435 435  
436 - The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
447 +(% class="box infomessage" %)
448 +(((
449 +**sudo systemctl start draginofwd**
450 +)))
451 +)))
437 437  
438 -(% style="text-align:center" %)
453 +
454 +(((
455 +debug check the ruing status of fwd:
456 +)))
457 +
458 +(((
459 +(% class="box infomessage" %)
460 +(((
461 +**sudo systemctl status draginofwd**
462 +)))
463 +)))
464 +
465 +[[image:1651746045057-414.png||height="193" width="729"]]
466 +
467 +
468 +
469 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
470 +
471 +
439 439  [[image:1651746078253-168.png||height="372" width="621"]]
440 440  
441 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.jpg]]
442 442  
443 443  
444 - We can check dragino_fwd running states in RPi by running:
476 +We can check dragino_fwd running states in RPi by running:
445 445  
446 - sudo journalctl -u draginofwd -f
478 +(% class="box infomessage" %)
479 +(((
480 +**~ sudo journalctl -u draginofwd -f**
481 +)))
447 447  
448 -(% style="text-align:center" %)
449 -[[image:1651746111963-838.png]]
483 +[[image:1651746111963-838.png||height="184" width="730"]]
450 450  
451 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.gif]]
452 452  
453 453  
454 - If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
487 + If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
455 455  
456 -(% style="text-align:center" %)
457 457  [[image:1651746139304-966.png||height="326" width="621"]]
458 458  
459 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
460 460  
461 -5.2.4 Commands to handle service
492 +=== 5.2.4 Commands to handle service ===
462 462  
463 -* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
464 -* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
465 -* **Start** dragino_fwd : sudo systemctl start draginofwd
466 -* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
467 -* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
468 468  
469 -6. Order Info
495 +* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
496 +* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
497 +* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
498 +* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
499 +* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
470 470  
471 - Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
472 472  
473 -**~ XX:**
474 474  
475 -* 868 (For Bands: EU868,IN865)
476 -* 915 (For Bands: US915,AU915,AS923,KR920)
477 -* 470 (For Band: CN470)
503 += 6. Order Info =
478 478  
479 -7. Packing Info
480 480  
481 -**~ PG1302 Package Includes**:
506 +Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
482 482  
508 +**~ (% style="color:#0000ff" %)XX:(%%)**
509 +
510 +* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
511 +* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
512 +* (% style="color:red" %)**470** (%%)(For Band: CN470)
513 +
514 +
515 +
516 += 7. Packing Info =
517 +
518 +(((
519 +
520 +
521 +**PG1302 Package Includes**:
522 +)))
523 +
524 +(((
525 +(((
483 483  * PG1302 x 1
484 484  * LoRa Antenna x 1
528 +)))
529 +)))
485 485  
486 -**~ PG1302-PI Package Includes**:
531 +(((
532 +
487 487  
534 +**PG1302-PI Package Includes**:
535 +)))
536 +
488 488  * PG1302 x 1
489 489  * LoRa Antenna x 1
490 490  * RPi3/4 converter PCB
491 491  * Screws to hole converter PCB on RPI.
492 492  
493 -8. Reference
494 494  
495 -* Datasheet, User Manual & Software Download:
543 +**PG1302-PI Dimension and weight: **
496 496  
497 - [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
545 +* Device Size: 18 x 8 x 4 cm
546 +* Weight: 150g
498 498  
499 499  
500 -9. Support
501 501  
502 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
503 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
550 +(((
551 += 8. Support =
504 504  
505 - [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
506 506  
554 +(((
555 +If you are experiencing issues and can't solve, you can send mail to
556 +)))
507 507  
558 +(((
559 +[[support@dragino.com>>mailto:support@dragino.com]]
560 +)))
561 +
562 +(((
563 +With your question as detail as possible. We will reply and help you in the shortest.
564 +
565 +
508 508  
567 +)))
568 +)))
image-20220616085956-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +29.1 KB
Content