Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 154.1
edited by Xiaoye
on 2024/06/22 10:00
Change comment: There is no comment for this version
To version 52.1
edited by Xiaoling
on 2022/05/06 09:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 -- LoRaWAN Concentrator User Manual
1 +PG1302
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,797 +14,540 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
3 -
4 -
5 -
6 -
7 -**Table of Contents:**
8 -
9 -{{toc/}}
10 -
11 -
12 -(% class="wikigeneratedid" id="H" %)
13 -(((
14 14  
15 -)))
16 16  
17 -= 1. Introduction =
3 +(% style="text-align:center" %)
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
18 18  
19 -== 1.1 What is PG1302 LoRaWAN Concentrator? ==
20 20  
21 21  
22 -(((
23 -The PG1302 is a (% style="color:blue" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 -)))
25 25  
26 -(((
27 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
28 -)))
9 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.gif]]
29 29  
30 -(((
31 -PG1302 is fully compatible with (% style="color:blue" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
32 -)))
33 33  
34 34  
35 -== 1.2 Features ==
13 +**PG1302 LoRaWAN Concentrator User Manual**
36 36  
15 +[[image:1651796979665-130.png]]
37 37  
38 -* Base on Semtech SX1302 solution
39 -* Support Raspberry Pi 3B/3B+/4/4B/5/5B, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
40 -* Up to -140dBm sensitivity
41 -* Support 3.3v and 5v.
42 -* Mini-PCIe Interface
43 -* Converter board to support Raspberry Pi
17 +Document Version: 1.0.0
44 44  
45 -== 1.3 General Interfaces for PG1302 ==
19 +Image Version: v1.0
46 46  
47 47  
48 -* SPI interface for LoRa
49 -* Power Input: 5v, 1A
50 -* 1 x I-PEX for LoRa
51 -* Working Temperature: -40 ℃ ~~ 80℃
52 52  
53 -== 1.4 Pin Mapping ==
54 54  
24 +{{toc numbered="true"/}}
55 55  
56 56  
57 -[[image:image-20240506170941-3.png]]
58 58  
59 -== 1.5 LEDs ==
60 60  
29 +~1. Introduction
61 61  
62 -(((
63 -TX: Blink when transmit a packet
64 -RX: Blink when receiving a packet
65 -Config: Always ON
66 -)))
31 + 1.1 What is PG1302 LoRaWAN Concentrator?
67 67  
68 -
69 -== 1.6 Power Consumption ==
70 -
71 -
72 -<300mA @ 3.3v.
73 -
74 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
75 -
76 -
77 -== 1.7 Antenna Installation ==
78 -
79 -
80 -Left:  **GPS antenna**
81 -
82 -Right:  **LoRa Antenna**
83 -
84 -[[image:https://www.thethingsnetwork.org/forum/uploads/default/original/3X/6/2/624619afa8d75a2c21bfd1e3687afaa75ad61cbc.jpeg||alt="PG1302_70"]]
85 -
86 -
87 -
88 -
89 -
90 -== 1.8 Applications ==
91 -
92 -
93 -* Smart Buildings & Home Automation
94 -* Logistics and Supply Chain Management
95 -* Smart Metering
96 -* Smart Agriculture
97 -* Smart Cities
98 -* Smart Factory
99 -
100 -= 2. Example: Set up as LoRaWAN gateway =
101 -
102 -== 2.1 System structure ==
103 -
104 -
105 105  (((
106 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
107 -
108 -
34 + The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on
109 109  )))
110 110  
111 -[[image:1651743698677-436.png||height="457" width="686"]]
112 -
113 -
114 -== 2.2 Hardware Installation ==
115 -
116 -
117 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
118 -
119 -[[image:image-20220621104746-1.png||height="351" width="415"]]
120 -
121 -
122 -= 3. Install the software. =
123 -
124 -
125 -**Raspberry Pi 3B/3B+/4B/5B**
126 -
127 -* Flash SD card with Dragino pre-build image which supports Web UI.
128 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
129 -
130 -**TinkerBoard2/2S, **
131 -
132 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
133 -
134 -**Orange Pi PC/PC PLUS.**
135 -
136 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
137 -
138 -= 4. Flash with pre-build image =
139 -
140 -== 4.1 Download the dragino image for RPI ==
141 -
142 -
143 143  (((
144 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
38 + random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide
145 145  )))
146 146  
147 -
148 -== 4.2 Flash the image to an SD card ==
149 -
150 -
151 -Flash the image to the SD card:
152 -
153 -[[image:1651744119133-233.png||height="373" width="621"]]
154 -
155 -
156 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
157 -
158 -
159 -== 4.3 Access the Linux console ==
160 -
161 -
162 162  (((
163 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
42 + range of distances.
164 164  )))
165 165  
166 -
167 -[[image:1651744193675-591.png||height="450" width="466"]]
168 -
169 -The account details for Web Login are:
170 -
171 171  (((
172 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
46 +
173 173  )))
174 174  
175 175  (((
176 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
50 + The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately
177 177  )))
178 178  
179 179  (((
180 -
54 + interfered environment.
181 181  )))
182 182  
183 183  (((
184 -**~ (% style="color:#0000ff" %)Backup account(%%)**
185 -)))
186 -
187 -(((
188 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
189 -
190 190  
191 191  )))
192 192  
193 -After logging in, you will be in the Linux console and type the command here.
194 -
195 -[[image:1651744358515-107.png||height="366" width="581"]]
196 -
197 -
198 -== 4.4 Access the WebUI of RPi4 ==
199 -
200 -=== 4.4.1 Home page ===
201 -
202 -
203 203  (((
204 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
205 -You will see the login interface of RPI as shown below.
206 -The account details for Web Login are:
62 + PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver
207 207  )))
208 208  
209 209  (((
210 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
211 -(% style="color:#0000ff" %)** Password:   dragino**
212 -
213 -
66 + in the exist OS.
214 214  )))
215 215  
216 -[[image:1651744457761-993.png||height="352" width="621"]]
217 217  
218 218  
219 -=== 4.4.2 LoRa Page ===
220 220  
72 +1.2 Features
221 221  
222 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
74 +* Base on Semtech SX1302 solution
75 +* Support Raspberry Pi 3B/3B+/4
76 +* Up to -140dBm sensitivity
77 +* Support 3.3v and 5v.
78 +* Mini-PCIe Interface
79 +* Converter board to support Raspberry Pi
223 223  
81 +1.3 General Interfaces
224 224  
225 -[[image:1651744554845-970.png||height="328" width="621"]]
83 +* SPI interface for LoRa
84 +* Power Input: 5v, 1A
85 +* 1 x I-PEX for LoRa
226 226  
87 +1.4 Pin Mapping
227 227  
228 -Different PG1302 hardware version can support different frequency range:
89 + [[image:1651743282627-547.png||height="402" width="425"]]
229 229  
230 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
231 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
91 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.gif]]
232 232  
233 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
93 +1.5 LEDs
234 234  
235 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
95 + TX: Blink when transmit a packet
236 236  
97 + RX: Blink when receive a packet
237 237  
238 -=== 4.4.3 LoRaWAN Page ===
99 + Config: Always ON
239 239  
240 -==== 4.4.3.1 Semtech UDP ====
101 +1.6 Power Consumption
241 241  
103 + TBD
242 242  
243 -[[image:1651744767914-283.png||height="352" width="621"]]
105 +1.7 Applications
244 244  
107 +* Smart Buildings & Home Automation
108 +* Logistics and Supply Chain Management
109 +* Smart Metering
110 +* Smart Agriculture
111 +* Smart Cities
112 +* Smart Factory
245 245  
246 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
114 +2. Example: Set up as LoRaWAN gateway.
247 247  
116 + 2.1 System structure
248 248  
249 -==== 4.4.3.2 Basic Station ====
118 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
250 250  
120 +(% style="text-align:center" %)
121 +[[image:1651743698677-436.png||height="457" width="686"]]
251 251  
252 -[[image:1651744890629-683.png||height="380" width="621"]]
253 253  
124 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.gif]]
254 254  
255 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
126 +2.2 Hardware Installation
256 256  
128 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
257 257  
258 -=== 4.4.4 LogRead ===
130 +(% style="text-align:center" %)
131 +[[image:1651743803032-803.png]]
259 259  
260 -==== 4.4.4.1 LoRa Log ====
133 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.gif]]
261 261  
135 +3. Install the software?
262 262  
263 -[[image:1651744955955-452.png||height="571" width="621"]]
137 + There are two ways to install software in RPi4 to use PG1302.
264 264  
139 +* Flash SD card with Dragino pre-build image which support Web UI.
140 +* Install lora packet forwarder in existing RPi OS.
265 265  
266 -Show the frequency for LoRa Radio and traffics.
142 +4. Flash with pre-build image
267 267  
144 + 4.1 Download the dragino image for RPI
268 268  
269 -==== 4.4.4.2 System Log ====
146 + Download PG1302_for_Rpi4_64_with_webui from
270 270  
148 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
271 271  
272 -Show system log.
150 +4.2 Flash the image to SD card
273 273  
274 -[[image:1651745003470-264.png||height="477" width="621"]]
152 + Flash the image to SD card:
275 275  
154 +(% style="text-align:center" %)
155 +[[image:1651744119133-233.png||height="373" width="621"]]
276 276  
277 -==== 4.4.4.3 Record Log ====
157 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]Note: Download the flash tool following this link
278 278  
159 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
279 279  
280 -**Record the system log.**
161 +4.3 Access the Linux console.
281 281  
282 -[[image:1651745069814-662.png||height="144" width="621"]]
163 + Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
283 283  
165 + Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
284 284  
285 -= 5. Install stand-alone LoRa Packet Forwarder =
167 +(% style="text-align:center" %)
168 +[[image:1651744193675-591.png||height="450" width="466"]]
286 286  
287 -== 5.1 Choose the right installation package for your OS ==
170 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
288 288  
172 + The account details for Web Login are:
289 289  
290 -(((
291 -**draginofwd-32bit (RPI, Orange PI)**
174 +**~ User Name: root**
292 292  
293 -**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
176 +**~ Password:   dragino**
294 294  
295 -**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
296 296  
179 +**~ Backup account**
297 297  
298 -**dragino-64bit (RPI, Orange PI)**
181 +**~ Pi/dragino**
299 299  
300 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
301 -)))
302 302  
303 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
184 + After log in, you will be in the Linux console and type command here.
304 304  
186 +(% style="text-align:center" %)
187 +[[image:1651744358515-107.png||height="366" width="581"]]
305 305  
306 -**dragino-tiker-32bit (Tinker Board)**
189 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]] 4.4 Access the WebUI of RPi4.
307 307  
308 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
191 + 4.4.1 Home page
309 309  
310 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
193 + Open a browser on the PC and type the RPI ip address
311 311  
195 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
312 312  
313 -**Install details:**
314 314  
315 -[[image:image-20220928181226-1.png||height="218" width="1100"]]
198 + You will see the login interface of RPI as shown below.
316 316  
200 + The account details for Web Login are:
317 317  
318 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
202 +**~ User Name: root**
319 319  
320 -(% class="box" %)
321 -(((
322 -**~ pi@raspberrypi:~~$ cat /etc/os-release
323 - PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
324 - NAME="Raspbian GNU/Linux"
325 - VERSION_ID="8"
326 - VERSION="8 (jessie)"
327 - ID=raspbian
328 - ID_LIKE=debian
329 - HOME_URL="http:~/~/www.raspbian.org/"
330 - SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
331 - BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"**
204 +**~ Password:   dragino**
332 332  
333 -
334 -)))
206 +(% style="text-align:center" %)
207 +[[image:1651744457761-993.png||height="352" width="621"]]
335 335  
209 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
336 336  
337 -== 5.2 Select the mode of connection to the server ==
211 +4.4.2 LoRa Page
338 338  
213 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
339 339  
340 -The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
215 +(% style="text-align:center" %)
216 +[[image:1651744554845-970.png||height="328" width="621"]]
341 341  
342 -The User can choose one of the methods as the connection mode.
218 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
343 343  
220 + Different PG1302 hardware version can support different frequency range:
344 344  
345 -**~1. Semtech UDP Mode  ~-~-> 5.2.1**
222 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
346 346  
347 -**2. Basic Station Mode  ~-~-> 5.2.2**
224 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
348 348  
349 349  
350 -=== 5.2.1 Semtech UDP Mode ===
227 + After user choose the frequency plan, he can see the actually frequency in used by checking the
351 351  
229 + page LogRead ~-~-> LoRa Log
352 352  
353 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
231 + Note *: See this instruction for how to customize frequency band
354 354  
233 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
355 355  
356 -In RPI, run the below command to get a Gateway ID
357 357  
358 -(% class="box infomessage" %)
359 -(((
360 -**~ ifconfig eth0**
361 -)))
236 +4.4.3 LoRaWAN Page
362 362  
363 -[[image:1651745210205-512.png||height="130" width="621"]]
238 + 4.4.3.1 Semtech UDP
364 364  
365 365  
366 -(((
367 -(((
368 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
241 +(% style="text-align:center" %)
242 +[[image:1651744767914-283.png||height="352" width="621"]]
369 369  
370 370  
245 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
371 371  
372 -==== **b). Input this Gateway EUI to the TTN-Stack** ====
247 + Note *: See this instruction for how to configure TTN.
373 373  
374 -
375 -)))
376 -)))
249 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
377 377  
378 -[[image:1651745267862-321.png||height="526" width="621"]]
379 379  
380 -[[image:1651745306744-481.png||height="478" width="621"]]
252 +4.4.3.2 Basic Station
381 381  
254 +(% style="text-align:center" %)
255 +[[image:1651744890629-683.png||height="380" width="621"]]
382 382  
257 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
383 383  
384 -==== **c). After Register, the status should show not connected as below:** ====
259 + Note *: See this instruction for how to configure TTN.
385 385  
261 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
386 386  
387 -[[image:1651745366987-458.png||height="363" width="621"]]
388 388  
264 +4.4.4 LogRead
389 389  
266 + 4.4.4.1 LoRa Log
390 390  
391 -==== **d). Enable SPI and I2C on your device** ====
268 +(% style="text-align:center" %)
269 +[[image:1651744955955-452.png||height="571" width="621"]]
392 392  
271 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
393 393  
394 -**the below example is using Raspberry 4B.**
273 + Show the frequency for LoRa Radio and traffics.
395 395  
396 396  
397 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
276 +4.4.4.2 System Log
398 398  
399 -[[image:1651745476754-240.png||height="234" width="629"]]
278 + Show system log.
400 400  
280 +(% style="text-align:center" %)
281 +[[image:1651745003470-264.png||height="477" width="621"]]
401 401  
402 -[[image:image-20220505181135-1.png]]
403 403  
284 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
404 404  
405 -[[image:image-20220505181135-2.png||height="229" width="622"]]
286 +4.4.4.3 Record Log
406 406  
407 407  
289 +**Record the system log.**
408 408  
409 -==== **e). Access the root account:** ====
291 +(% style="text-align:center" %)
292 +[[image:1651745069814-662.png||height="144" width="621"]]
410 410  
411 -(((
412 -[[image:1651745583363-614.png||height="151" width="732"]]
294 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
413 413  
296 +5. Install stand alone LoRa Packet Forwarder.
414 414  
415 -
416 -)))
298 + 5.1 OS requirement
417 417  
418 -==== **f). Modify the configuration of FWD** ====
300 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
419 419  
302 + pi@raspberrypi:~~$ cat /etc/os-release
420 420  
421 -(((
422 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
423 -)))
304 + PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
424 424  
425 -(((
426 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
306 + NAME="Raspbian GNU/Linux"
427 427  
308 + VERSION_ID="8"
428 428  
429 -the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
310 + VERSION="8 (jessie)"
430 430  
431 -/etc/lora/
432 -├── cfg-302  ~-~--> global configuration file
433 -├── devskey  ~-~--> Database
434 -├── global_conf.json  ~-~--> Frequency plan for current applications
435 -└── local_conf.json  ~-~--> Local fwd configuration
312 + ID=raspbian
436 436  
437 -At default, the users need to change two configurations file: global_conf.json and local_conf.json.
314 + ID_LIKE=debian
438 438  
316 + HOME_URL="http:~/~/www.raspbian.org/"
439 439  
440 -===== **1.) Configure gateway EUI and server address, port for fwd** =====
318 + SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
441 441  
442 -
443 -)))
320 + BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
444 444  
445 -[[image:1651745709709-887.png||height="820" width="621"]]
446 446  
323 +5.2 Get Gateway ID in Raspberry and input this in TTN v3.
447 447  
448 -**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
325 + In RPI, run below command to get a Gateway ID
449 449  
327 + ifconfig eth0
450 450  
451 -===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
452 -
453 -
454 -the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
455 -
456 -[[image:1651745838008-820.png||height="650" width="621"]]
457 -
458 -
459 -If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
460 -
461 -**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
462 -
463 -
464 -
465 -====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
466 -
467 -[[image:1651745867516-322.png||height="83" width="740"]]
468 -
469 -
470 -====== **Override the global_conf.json** ======
471 -
472 -(% class="box infomessage" %)
473 -(((
474 -**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
475 -)))
476 -
477 -[[image:1651745984006-868.png||height="87" width="745"]]
478 -
479 -
480 -==== (% style="color:inherit; font-family:inherit; font-size:23px" %)**g). Running the Fwd Server**(%%) ====
481 -
482 -
483 -(((
484 -Run the below command to restart the dragino_fwd:
485 -)))
486 -
487 -(((
488 -(% class="box infomessage" %)
489 -(((
490 -**sudo systemctl start draginofwd**
491 -)))
492 -)))
493 -
494 -(((
495 -debug check the ruing status of fwd:
496 -)))
497 -
498 -(((
499 -(% class="box infomessage" %)
500 -(((
501 -**sudo systemctl status draginofwd**
502 -)))
503 -)))
504 -
505 -[[image:1651746045057-414.png||height="193" width="729"]]
506 -
507 -
508 -Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
509 -
510 -[[image:1651746078253-168.png||height="372" width="621"]]
511 -
512 -
513 -
514 -Get the draginofwd real-time running log:
515 -
516 -(% class="box infomessage" %)
517 -(((
518 -**~ sudo journalctl -u draginofwd -f**
519 -)))
520 -
521 -[[image:1651746111963-838.png||height="184" width="730"]]
522 -
523 -
524 -
525 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
526 -
527 -[[image:1651746139304-966.png||height="326" width="621"]]
528 -
529 -
530 -==== **h). Commands to handle service** ====
531 -
532 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
533 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
534 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
535 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
536 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
537 -
538 -
539 -
540 -
541 -
542 -
543 -
544 -=== 5.2.2 Basic Station Mode. ===
545 -
546 -
547 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
548 -
549 -
550 -In RPI, run the below command to get a Gateway EUI
551 -
552 -(% class="box infomessage" %)
553 -(((
554 -**~ ifconfig eth0**
555 -)))
556 -
329 +(% style="text-align:center" %)
557 557  [[image:1651745210205-512.png||height="130" width="621"]]
558 558  
332 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.gif]]
559 559  
560 -(((
561 -(((
562 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
563 -)))
564 -)))
334 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
565 565  
336 +(% style="text-align:center" %)
337 +[[image:1651745267862-321.png||height="526" width="621"]]
566 566  
339 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.jpg]]
567 567  
568 -==== **b). Register the gateway with the Basic Station Mode on the TTN-Stack** ====
341 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.jpg]]
569 569  
343 +(% style="text-align:center" %)
344 +[[image:1651745306744-481.png||height="478" width="621"]]
570 570  
571 -[[image:image-20230329164417-5.png]]
346 +(% style="text-align:center" %)
347 +[[image:1651745366987-458.png||height="363" width="621"]]
572 572  
349 +After set up, the status should show not connected as below:
573 573  
351 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.jpg]]
574 574  
575 -==== **c). Download the gateway API keys, and then upload them to the gateway.** ====
353 +5.2.1 Download and install LoRaWAN packet forwarder
576 576  
577 577  
578 -[[image:image-20230329164704-6.png]]
356 + Enable SPI and I2C first:
579 579  
358 + a)SPI needs to be enabled on the Raspberry Pi
580 580  
581 -==== **d). The status Shows disconnect.** ====
360 + Run sudo raspi-config to open the config window
582 582  
362 +(% style="text-align:center" %)
363 +[[image:1651745476754-240.png||height="235" width="631"]]
583 583  
584 -[[image:image-20230329165619-7.png||height="568" width="948"]]
585 585  
366 +(% style="text-align:center" %)
367 +[[image:image-20220505181135-1.png]]
586 586  
587 -==== **e.) Uploda API keys into the gateway** ====
369 +(% style="text-align:center" %)
370 +[[image:image-20220505181135-2.png]]
588 588  
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.jpg]]
589 589  
590 -The user can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/:**
374 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.jpg]]
591 591  
592 -//**directory tree:**//
593 593  
594 -/etc/station/
595 -└── station.conf  ~-~--> station configuration file
596 596  
597 597  
598 -**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
599 599  
600 -eg:
380 + In RPI , Fist: Enter root account:
601 601  
602 -/etc/station/.
603 -├── cups.key
604 -├── cups.trust
605 -├── cups.uri
606 -├── lns.key
607 -└── station.conf
608 -
382 +(% style="text-align:center" %)
383 +[[image:1651745583363-614.png]]
609 609  
610 -==== **f). Configure Gateway EUI** ====
385 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.jpg]]
611 611  
612 -[[image:image-20240622094409-1.png]]
387 + and then run:
613 613  
389 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
614 614  
391 + chmod +x ./auto_install.sh
615 615  
393 + ./auto_install.sh
616 616  
617 -==== **g). **Start the station service ====
395 +(% style="text-align:center" %)
396 +[[image:1651745611629-818.png]]
618 618  
619 -After configuring the GWEUI and uploading the certificate, you can start the station service via the below command:
398 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.gif]]
620 620  
621 -(% class="box infomessage" %)
622 -(((
623 -ln -sf /usr/bin/station_sx1302 /usr/bin/station
400 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
624 624  
625 -systemctl start draginostation
626 -)))
402 + You can get these output:
627 627  
404 +(% style="text-align:center" %)
405 +[[image:1651745657252-173.png||height="426" width="621"]]
628 628  
407 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.jpg]]
629 629  
409 +5.5.2 Config Gateway ID, Frequency Band and Server address
630 630  
631 -Tree Directory:
411 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
632 632  
633 -/etc/station/
413 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
634 634  
635 -├── cups-bak.done
636 -├── cups-bak.key
637 -├── cups-bak.trust
638 -├── cups-bak.uri
639 -├── cups.key
640 -├── cups.trust
641 -├── cups.uri
642 -├── lns.key
643 -├── station.conf
644 -├── tc-bak.crt
645 -├── tc-bak.done
646 -├── tc-bak.key
647 -├── tc-bak.trust
648 -├── tc-bak.uri
649 -├── tc.crt
650 -├── tc.key
651 -├── tc.trust
652 -└── tc.uri
653 -
415 +(% style="text-align:center" %)
416 +[[image:1651745709709-887.png||height="820" width="621"]]
654 654  
418 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.jpg]]
655 655  
656 -==== **h). Check station running log** ====
420 + User can find the TTN v3 server address from:
657 657  
422 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
658 658  
659 -tail -f /var/log/station.log
660 660  
425 + And the default frequency band is US915 in **global_conf.json** file.
661 661  
662 -[[image:image-20230329201624-11.png]]
427 +(% style="text-align:center" %)
428 +[[image:1651745838008-820.png||height="650" width="621"]]
663 663  
430 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.jpg]]
664 664  
432 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
665 665  
666 -= 6. Add GPS support in PG1302 =
434 + 1).Chose your need the name of region frequency.
667 667  
668 -The PG1302 supports GPS:
436 +(% style="text-align:center" %)
437 +[[image:1651745867516-322.png]]
669 669  
670 -[[image:image-20240118160132-1.png||height="270" width="338"]]
671 671  
440 + 2). Use this command to copy it.
672 672  
673 -* **The users can find the GPS device in Raspberry: /dev/ttyS0 or /dev/ttyAMA0**
442 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
674 674  
675 - [[image:image-20240118160407-2.png||height="71" width="458"]]
444 +(% style="text-align:center" %)
445 +[[image:1651745984006-868.png]]
676 676  
447 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.jpg]]
677 677  
678 -* **Check the GPS output: cat /dev/ttyS0**
449 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
679 679  
680 - [[image:image-20240118160454-3.png]]
451 +5.2.3 Check result
681 681  
453 + Run below command to restart the dragino_fwd:
682 682  
683 -* **Add the GPS to the Semtech UDP package forwarder configuration.**
455 + sudo systemctl stop draginofwd
684 684  
685 - [[image:image-20240118160928-4.png||height="426" width="464"]]
457 + sudo systemctl start draginofwd
686 686  
459 + debug check the ruing status of fwd:
687 687  
688 -* **Test GPS function**
461 + sudo systemctl status draginofwd
689 689  
690 -**~ 1.) Stop IoT service: systemctl stop draginofwd**
463 +(% style="text-align:center" %)
464 +[[image:1651746045057-414.png]]
691 691  
466 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.jpg]]
692 692  
693 -**~ 2.) Run the fwd command and check the output**
468 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
694 694  
470 +(% style="text-align:center" %)
471 +[[image:1651746078253-168.png||height="372" width="621"]]
695 695  
696 - [[image:image-20240118161109-5.png]]
473 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.jpg]]
697 697  
698 698  
699 -**~ 3.) Trouble Shooting:**
476 + We can check dragino_fwd running states in RPi by running:
700 700  
701 - If you get many WARNING outputs, which should be the GPS location is invalid, you need to adjust the GPS location, it is recommended to put it outdoors
478 + sudo journalctl -u draginofwd -f
702 702  
480 +(% style="text-align:center" %)
481 +[[image:1651746111963-838.png]]
703 703  
704 - [[image:image-20240118161333-6.png]]
483 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.gif]]
705 705  
706 706  
707 - The user can check the PG1302 board GPS LED status to check the location,
486 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
708 708  
709 - GPS location is valid  ~-~--> GPS LED will light up
488 +(% style="text-align:center" %)
489 +[[image:1651746139304-966.png||height="326" width="621"]]
710 710  
711 - GPS location is invalid ~-~--> GPS LED will light down
491 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
712 712  
493 +5.2.4 Commands to handle service
713 713  
714 - [[image:image-20240118162033-7.png]]
495 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
496 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
497 +* **Start** dragino_fwd : sudo systemctl start draginofwd
498 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
499 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
715 715  
501 +6. Order Info
716 716  
503 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
717 717  
718 -= 7. Trouble Shooting =
505 +**~ XX:**
719 719  
720 -(% class="wikigeneratedid" %)
721 -7.1 Failed to start the concentrator how to debug
507 +* 868 (For Bands: EU868,IN865)
508 +* 915 (For Bands: US915,AU915,AS923,KR920)
509 +* 470 (For Band: CN470)
722 722  
511 +7. Packing Info
723 723  
724 ---When the problem "failed to start the concentrator" occurs, the user needs to check whether the I2C and SPI are enabled,--
513 +**~ PG1302 Package Includes**:
725 725  
726 ---Users can enter the following command to check whether I2C is detected, and the detection of **"60"** is correct.--
727 -
728 -(% class="box infomessage" %)
729 -(((
730 ---**i2cdetect -y 1**--
731 -)))
732 -
733 -**Note: This method has been removed because the i2c had been removed on the latest PG1302.**
734 -
735 -
736 -
737 -Check whether the SPI path of the configuration file is correct,
738 -
739 -(% class="box infomessage" %)
740 -(((
741 -**cat /etc/lora/global_conf.json **
742 -)))
743 -
744 -(% class="wikigeneratedid" %)
745 -[[image:image-20230518092732-2.png||height="378" width="691"]]
746 -
747 -
748 -
749 -= 8. Order Info =
750 -
751 -
752 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
753 -
754 -**~ (% style="color:#0000ff" %)XX:(%%)**
755 -
756 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
757 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
758 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
759 -
760 -= 9. Packing Info =
761 -
762 -
763 -(((
764 -**PG1302 Package Includes**:
765 -)))
766 -
767 -(((
768 768  * PG1302 x 1
769 769  * LoRa Antenna x 1
770 -)))
771 771  
518 +**~ PG1302-PI Package Includes**:
772 772  
773 -
774 -(((
775 -**PG1302-PI Package Includes**:
776 -)))
777 -
778 778  * PG1302 x 1
779 779  * LoRa Antenna x 1
780 780  * RPi3/4 converter PCB
781 781  * Screws to hole converter PCB on RPI.
782 782  
783 -**PG1302-PI Dimension and weight: **
525 +8. Reference
784 784  
785 -* Device Size: 18 x 8 x 4 cm
786 -* Weight: 150g
527 +* Datasheet, User Manual & Software Download:
787 787  
788 -= 10. Support =
529 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
789 789  
790 790  
791 -(((
792 -If you are experiencing issues and can't solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
793 -)))
532 +9. Support
794 794  
795 -(((
796 -With your question as detail as possible. We will reply and help you in the shortest.
797 -)))
534 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
535 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
536 +
537 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
538 +
539 +
540 +
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230329164417-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content
image-20230518091900-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -6.8 KB
Content
image-20230518092732-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.1 KB
Content
image-20231115174839-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -80.3 KB
Content
image-20231115180410-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -78.7 KB
Content
image-20240118160132-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -37.2 KB
Content
image-20240118160407-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.9 KB
Content
image-20240118160454-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -42.0 KB
Content
image-20240118160928-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -83.8 KB
Content
image-20240118161109-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -178.1 KB
Content
image-20240118161333-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -120.0 KB
Content
image-20240118162033-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -724.0 KB
Content
image-20240122140551-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -334.9 KB
Content
image-20240506170501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.7 KB
Content
image-20240506170559-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -154.3 KB
Content
image-20240506170941-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -357.5 KB
Content
image-20240622094409-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -134.7 KB
Content