Skip to Content
Last modified by Kilight Cao on 2024/06/22 10:43
From version 145.1
edited by Xiaoye
on 2024/02/26 15:48
Change comment: There is no comment for this version
To version 85.1
edited by Xiaoling
on 2022/05/06 15:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 -- LoRaWAN Concentrator User Manual
1 +PG1302
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,95 +1,89 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents:**
8 8  
10 +
11 +
12 +**PG1302 LoRaWAN Concentrator User Manual**
13 +
14 +
15 +
16 +
17 +
9 9  {{toc/}}
10 10  
11 11  
21 +----
22 +
12 12  (% class="wikigeneratedid" id="H" %)
13 13  (((
14 14  
15 15  )))
16 16  
17 -= 1. Introduction =
28 +=== 1. Introduction ===
18 18  
19 -== 1.1 What is PG1302 LoRaWAN Concentrator? ==
30 +==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
20 20  
32 +(((
33 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 +)))
21 21  
22 22  (((
23 -The PG1302 is a (% style="color:blue" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
24 24  )))
25 25  
26 26  (((
27 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
41 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
28 28  )))
29 29  
30 30  (((
31 -PG1302 is fully compatible with (% style="color:blue" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
45 +(((
46 +
32 32  )))
48 +)))
33 33  
50 +==== 1.2 Features ====
34 34  
35 -== 1.2 Features ==
36 -
37 -
38 38  * Base on Semtech SX1302 solution
39 -* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
53 +* Support Raspberry Pi 3B/3B+/4
40 40  * Up to -140dBm sensitivity
41 41  * Support 3.3v and 5v.
42 42  * Mini-PCIe Interface
43 43  * Converter board to support Raspberry Pi
44 44  
45 -== 1.3 General Interfaces for PG1302 ==
59 +==== 1.3 General Interfaces ====
46 46  
47 -
48 48  * SPI interface for LoRa
49 49  * Power Input: 5v, 1A
50 50  * 1 x I-PEX for LoRa
51 -* Working Temperature: -40 ℃ ~~ 80℃
52 52  
53 -== 1.4 Pin Mapping ==
65 +==== 1.4 Pin Mapping ====
54 54  
67 + [[image:1651743282627-547.png||height="402" width="425"]]
55 55  
56 -[[image:image-20240122140551-1.png]]
57 57  
58 58  
59 -== 1.5 LEDs ==
71 +==== 1.5 LEDs ====
60 60  
73 + TX: Blink when transmit a packet
61 61  
62 -(((
63 -TX: Blink when transmit a packet
64 -RX: Blink when receiving a packet
65 -Config: Always ON
66 -)))
75 + RX: Blink when receive a packet
67 67  
77 + Config: Always ON
68 68  
69 -== 1.6 Power Consumption ==
70 70  
80 +==== 1.6 Power Consumption ====
71 71  
72 -<300mA @ 3.3v.
82 + TBD
73 73  
74 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
75 75  
85 +==== 1.7 Applications ====
76 76  
77 -== 1.7 Antenna Installation ==
78 -
79 -
80 -Left:  **GPS antenna**
81 -
82 -Right:  **LoRa Antenna**
83 -
84 -[[image:https://www.thethingsnetwork.org/forum/uploads/default/original/3X/6/2/624619afa8d75a2c21bfd1e3687afaa75ad61cbc.jpeg||alt="PG1302_70"]]
85 -
86 -
87 -
88 -
89 -
90 -== 1.8 Applications ==
91 -
92 -
93 93  * Smart Buildings & Home Automation
94 94  * Logistics and Supply Chain Management
95 95  * Smart Metering
... ... @@ -97,678 +97,410 @@
97 97  * Smart Cities
98 98  * Smart Factory
99 99  
94 +=== 2. Example: Set up as LoRaWAN gateway. ===
100 100  
96 +==== 2.1 System structure ====
101 101  
102 -= 2. Example: Set up as LoRaWAN gateway =
98 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
103 103  
104 -== 2.1 System structure ==
100 + Set up method for other server are similar.
105 105  
106 -
107 -(((
108 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
109 -
110 -
111 -)))
112 -
102 +(% style="text-align:center" %)
113 113  [[image:1651743698677-436.png||height="457" width="686"]]
114 114  
115 115  
116 -== 2.2 Hardware Installation ==
117 117  
107 +==== 2.2 Hardware Installation ====
118 118  
119 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
109 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
120 120  
121 -[[image:image-20220621104746-1.png||height="351" width="415"]]
111 +(% style="text-align:center" %)
112 +[[image:1651743803032-803.png]]
122 122  
123 123  
124 -= 3. Install the software? =
125 125  
116 +=== 3. Install the software? ===
126 126  
127 -**Raspberry Pi 3B/3B+/4,**
118 + There are two ways to install software in RPi4 to use PG1302.
128 128  
129 -* Flash SD card with Dragino pre-build image which supports Web UI.
130 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
120 +* Flash SD card with Dragino pre-build image which support Web UI.
121 +* Install lora packet forwarder in existing RPi OS.
131 131  
132 -**TinkerBoard2/2S, **
123 +=== 4. Flash with pre-build image ===
133 133  
134 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
125 +==== 4.1 Download the dragino image for RPI ====
135 135  
136 -**Orange Pi PC/PC PLUS.**
127 + Download PG1302_for_Rpi4_64_with_webui from
137 137  
138 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
129 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
139 139  
140 -= 4. Flash with pre-build image =
141 141  
142 -== 4.1 Download the dragino image for RPI ==
132 +==== 4.2 Flash the image to SD card ====
143 143  
134 + Flash the image to SD card:
144 144  
145 -(((
146 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
147 -)))
148 -
149 -
150 -== 4.2 Flash the image to an SD card ==
151 -
152 -
153 -Flash the image to the SD card:
154 -
136 +(% style="text-align:center" %)
155 155  [[image:1651744119133-233.png||height="373" width="621"]]
156 156  
139 + Note: Download the flash tool following this link
157 157  
158 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
141 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
159 159  
160 160  
161 -== 4.3 Access the Linux console ==
144 +==== 4.3 Access the Linux console ====
162 162  
163 -
164 164  (((
165 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
147 + Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be
166 166  )))
167 167  
168 -
169 -[[image:1651744193675-591.png||height="450" width="466"]]
170 -
171 -The account details for Web Login are:
172 -
173 173  (((
174 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
151 + able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
175 175  )))
176 176  
177 177  (((
178 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
155 + Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
179 179  )))
180 180  
181 -(((
182 -
183 -)))
184 184  
185 -(((
186 -**~ (% style="color:#0000ff" %)Backup account(%%)**
187 -)))
159 +(% style="text-align:center" %)
160 +[[image:1651744193675-591.png||height="450" width="466"]]
188 188  
189 -(((
190 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
191 191  
192 -
193 -)))
163 + The account details for Web Login are:
194 194  
195 -After logging in, you will be in the Linux console and type the command here.
165 +**~ User Name: root**
196 196  
197 -[[image:1651744358515-107.png||height="366" width="581"]]
167 +**~ Password:   dragino**
198 198  
199 199  
200 -== 4.4 Access the WebUI of RPi4 ==
170 +**~ Backup account**
201 201  
202 -=== 4.4.1 Home page ===
172 +**~ Pi/dragino**
203 203  
204 204  
205 -(((
206 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
207 -You will see the login interface of RPI as shown below.
208 -The account details for Web Login are:
209 -)))
175 + After log in, you will be in the Linux console and type command here.
210 210  
211 -(((
212 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
213 -(% style="color:#0000ff" %)** Password:   dragino**
177 +(% style="text-align:center" %)
178 +[[image:1651744358515-107.png||height="366" width="581"]]
214 214  
215 -
216 -)))
217 217  
218 -[[image:1651744457761-993.png||height="352" width="621"]]
181 +==== 4.4 Access the WebUI of RPi4. ====
219 219  
183 +===== 4.4.1 Home page =====
220 220  
221 -=== 4.4.2 LoRa Page ===
185 + Open a browser on the PC and type the RPI ip address
222 222  
187 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
223 223  
224 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
189 + You will see the login interface of RPI as shown below.
225 225  
191 + The account details for Web Login are:
226 226  
227 -[[image:1651744554845-970.png||height="328" width="621"]]
193 +**~ User Name: root**
228 228  
195 +**~ Password:   dragino**
229 229  
230 -Different PG1302 hardware version can support different frequency range:
197 +(% style="text-align:center" %)
198 +[[image:1651744457761-993.png||height="352" width="621"]]
231 231  
232 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
233 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
234 234  
235 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
201 +===== 4.4.2 LoRa Page =====
236 236  
237 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
203 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
238 238  
205 +(% style="text-align:center" %)
206 +[[image:1651744554845-970.png||height="328" width="621"]]
239 239  
240 -=== 4.4.3 LoRaWAN Page ===
241 241  
242 -==== 4.4.3.1 Semtech UDP ====
209 + Different PG1302 hardware version can support different frequency range:
243 243  
211 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
244 244  
245 -[[image:1651744767914-283.png||height="352" width="621"]]
213 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
246 246  
247 247  
248 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
216 + After user choose the frequency plan, he can see the actually frequency in used by checking the
249 249  
218 + page LogRead ~-~-> LoRa Log
250 250  
251 -==== 4.4.3.2 Basic Station ====
220 + Note *: See this instruction for how to customize frequency band
252 252  
222 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
253 253  
254 -[[image:1651744890629-683.png||height="380" width="621"]]
255 255  
225 +===== 4.4.3 LoRaWAN Page =====
256 256  
257 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
227 +====== 4.4.3.1 Semtech UDP ======
258 258  
259 259  
260 -=== 4.4.4 LogRead ===
230 +(% style="text-align:center" %)
231 +[[image:1651744767914-283.png||height="352" width="621"]]
261 261  
262 -==== 4.4.4.1 LoRa Log ====
233 + Note *: See this instruction for how to configure TTN.
263 263  
235 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
264 264  
265 -[[image:1651744955955-452.png||height="571" width="621"]]
266 266  
238 +====== 4.4.3.2 Basic Station ======
267 267  
268 -Show the frequency for LoRa Radio and traffics.
240 +(% style="text-align:center" %)
241 +[[image:1651744890629-683.png||height="380" width="621"]]
269 269  
243 + Note *: See this instruction for how to configure TTN.
270 270  
271 -==== 4.4.4.2 System Log ====
245 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
272 272  
273 273  
274 -Show system log.
248 +===== 4.4.4 LogRead =====
275 275  
276 -[[image:1651745003470-264.png||height="477" width="621"]]
250 +====== 4.4.4.1 LoRa Log ======
277 277  
252 +(% style="text-align:center" %)
253 +[[image:1651744955955-452.png||height="571" width="621"]]
278 278  
279 -==== 4.4.4.3 Record Log ====
255 + Show the frequency for LoRa Radio and traffics.
280 280  
281 281  
282 -**Record the system log.**
258 +====== 4.4.4.2 System Log ======
283 283  
284 -[[image:1651745069814-662.png||height="144" width="621"]]
260 + Show system log.
285 285  
262 +(% style="text-align:center" %)
263 +[[image:1651745003470-264.png||height="477" width="621"]]
286 286  
287 -= 5. Install stand-alone LoRa Packet Forwarder =
288 288  
289 -== 5.1 Choose the right installation package for your OS ==
290 290  
267 +====== 4.4.4.3 Record Log ======
291 291  
292 -(((
293 -**draginofwd-32bit (RPI, Orange PI)**
269 +**~ Record the system log.**
294 294  
295 -**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
271 +(% style="text-align:center" %)
272 +[[image:1651745069814-662.png||height="144" width="621"]]
296 296  
297 -**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
298 298  
275 +=== 5. Install stand alone LoRa Packet Forwarder. ===
299 299  
300 -**dragino-64bit (RPI, Orange PI)**
277 +==== 5.1 OS requirement ====
301 301  
302 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
303 -)))
279 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
304 304  
305 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
281 + pi@raspberrypi:~~$ cat /etc/os-release
306 306  
307 -
308 -**dragino-tiker-32bit (Tinker Board)**
309 -
310 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
311 -
312 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
313 -
314 -
315 -**Install details:**
316 -
317 -[[image:image-20220928181226-1.png||height="218" width="1100"]]
318 -
319 -
320 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
321 -
322 -(% class="box" %)
323 -(((
324 -**~ pi@raspberrypi:~~$ cat /etc/os-release
325 325   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
284 +
326 326   NAME="Raspbian GNU/Linux"
286 +
327 327   VERSION_ID="8"
288 +
328 328   VERSION="8 (jessie)"
290 +
329 329   ID=raspbian
292 +
330 330   ID_LIKE=debian
294 +
331 331   HOME_URL="http:~/~/www.raspbian.org/"
296 +
332 332   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
333 - BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"**
334 334  
335 -
336 -)))
299 + BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
337 337  
338 338  
339 -== 5.2 Select the mode of connection to the server ==
302 +==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
340 340  
304 + In RPI, run below command to get a Gateway ID
341 341  
342 -The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
306 + (% class="mark" %)ifconfig eth0
343 343  
344 -The User can choose one of the methods as the connection mode.
345 -
346 -
347 -**~1. Semtech UDP Mode  ~-~-> 5.2.1**
348 -
349 -**2. Basic Station Mode  ~-~-> 5.2.2**
350 -
351 -
352 -=== 5.2.1 Semtech UDP Mode ===
353 -
354 -
355 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
356 -
357 -
358 -In RPI, run the below command to get a Gateway ID
359 -
360 -(% class="box infomessage" %)
361 -(((
362 -**~ ifconfig eth0**
363 -)))
364 -
308 +(% style="text-align:center" %)
365 365  [[image:1651745210205-512.png||height="130" width="621"]]
366 366  
367 367  
368 -(((
369 -(((
370 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
312 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
371 371  
314 + Make sure to select legacy packet forwarder.
372 372  
316 +(% style="text-align:center" %)
317 +[[image:1651745267862-321.png||height="526" width="621"]]
373 373  
374 -==== **b). Input this Gateway EUI to the TTN-Stack** ====
375 375  
376 -
377 -)))
378 -)))
379 379  
380 -[[image:1651745267862-321.png||height="526" width="621"]]
381 -
321 +(% style="text-align:center" %)
382 382  [[image:1651745306744-481.png||height="478" width="621"]]
383 383  
324 +After set up, the status should show not connected as below:
384 384  
385 -
386 -==== **c). After Register, the status should show not connected as below:** ====
387 -
388 -
326 +(% style="text-align:center" %)
389 389  [[image:1651745366987-458.png||height="363" width="621"]]
390 390  
391 391  
330 +===== 5.2.1 Download and install LoRaWAN packet forwarder =====
392 392  
393 -==== **d). Enable SPI and I2C on your device** ====
332 + Enable SPI and I2C first:
394 394  
334 + a)SPI needs to be enabled on the Raspberry Pi
395 395  
396 -**the below example is using Raspberry 4B.**
336 + Run sudo raspi-config to open the config window
397 397  
338 +(% style="text-align:center" %)
339 +[[image:1651745476754-240.png||height="235" width="631"]]
398 398  
399 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
400 400  
401 -[[image:1651745476754-240.png||height="234" width="629"]]
402 -
403 -
342 +(% style="text-align:center" %)
404 404  [[image:image-20220505181135-1.png]]
405 405  
345 +(% style="text-align:center" %)
346 +[[image:image-20220505181135-2.png]]
406 406  
407 -[[image:image-20220505181135-2.png||height="229" width="622"]]
408 408  
409 409  
410 410  
411 -==== **e). Access the root account:** ====
351 + In RPI , Fist: Enter root account:
412 412  
413 -(((
414 -[[image:1651745583363-614.png||height="151" width="732"]]
353 +(% style="text-align:center" %)
354 +[[image:1651745583363-614.png]]
415 415  
416 416  
417 -
418 -)))
357 + and then run:
419 419  
420 -==== **f). Modify the configuration of FWD** ====
359 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
421 421  
361 + chmod +x ./auto_install.sh
422 422  
423 -(((
424 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
425 -)))
363 + ./auto_install.sh
426 426  
427 -(((
428 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
365 +(% style="text-align:center" %)
366 +[[image:1651745611629-818.png]]
429 429  
430 430  
431 -the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
369 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
432 432  
433 -/etc/lora/
434 -├── cfg-302  ~-~--> global configuration file
435 -├── devskey  ~-~--> Database
436 -├── global_conf.json  ~-~--> Frequency plan for current applications
437 -└── local_conf.json  ~-~--> Local fwd configuration
371 + You can get these output:
438 438  
439 -At default, the users need to change two configurations file: global_conf.json and local_conf.json.
373 +(% style="text-align:center" %)
374 +[[image:1651745657252-173.png||height="426" width="621"]]
440 440  
441 441  
442 -===== **1.) Configure gateway EUI and server address, port for fwd** =====
377 +===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
443 443  
444 -
445 -)))
379 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
446 446  
381 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
382 +
383 +(% style="text-align:center" %)
447 447  [[image:1651745709709-887.png||height="820" width="621"]]
448 448  
449 449  
450 -**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
387 + User can find the TTN v3 server address from:
451 451  
389 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
452 452  
453 -===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
454 454  
392 + And the default frequency band is US915 in **global_conf.json** file.
455 455  
456 -the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
457 -
394 +(% style="text-align:center" %)
458 458  [[image:1651745838008-820.png||height="650" width="621"]]
459 459  
460 460  
461 -If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
398 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
462 462  
463 -**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
400 + 1).Chose your need the name of region frequency.
464 464  
402 +(% style="text-align:center" %)
403 +[[image:1651745867516-322.png]]
465 465  
466 466  
467 -====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
406 + 2). Use this command to copy it.
468 468  
469 -[[image:1651745867516-322.png||height="83" width="740"]]
408 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
470 470  
410 +(% style="text-align:center" %)
411 +[[image:1651745984006-868.png]]
471 471  
472 -====== **Override the global_conf.json** ======
473 473  
474 -(% class="box infomessage" %)
414 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
415 +
416 +(% class="wikigeneratedid" %)
475 475  (((
476 -**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
418 +
477 477  )))
478 478  
479 -[[image:1651745984006-868.png||height="87" width="745"]]
421 +===== 5.2.3 Check result =====
480 480  
423 + Run below command to restart the dragino_fwd:
481 481  
482 -==== (% style="color:inherit; font-family:inherit; font-size:23px" %)**g). Running the Fwd Server**(%%) ====
425 + sudo systemctl stop draginofwd
483 483  
427 + sudo systemctl start draginofwd
484 484  
485 -(((
486 -Run the below command to restart the dragino_fwd:
487 -)))
429 + debug check the ruing status of fwd:
488 488  
489 -(((
490 -(% class="box infomessage" %)
491 -(((
492 -**sudo systemctl start draginofwd**
493 -)))
494 -)))
431 + sudo systemctl status draginofwd
495 495  
496 -(((
497 -debug check the ruing status of fwd:
498 -)))
433 +(% style="text-align:center" %)
434 +[[image:1651746045057-414.png]]
499 499  
500 -(((
501 -(% class="box infomessage" %)
502 -(((
503 -**sudo systemctl status draginofwd**
504 -)))
505 -)))
506 506  
507 -[[image:1651746045057-414.png||height="193" width="729"]]
437 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
508 508  
509 -
510 -Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
511 -
439 +(% style="text-align:center" %)
512 512  [[image:1651746078253-168.png||height="372" width="621"]]
513 513  
514 514  
443 + We can check dragino_fwd running states in RPi by running:
515 515  
516 -Get the draginofwd real-time running log:
445 + //**sudo journalctl -u draginofwd -f**//
517 517  
518 -(% class="box infomessage" %)
519 -(((
520 -**~ sudo journalctl -u draginofwd -f**
521 -)))
447 +(% style="text-align:center" %)
448 +[[image:1651746111963-838.png]]
522 522  
523 -[[image:1651746111963-838.png||height="184" width="730"]]
450 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
524 524  
525 -
526 -
527 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
528 -
452 +(% style="text-align:center" %)
529 529  [[image:1651746139304-966.png||height="326" width="621"]]
530 530  
531 531  
532 -==== **h). Commands to handle service** ====
456 +===== 5.2.4 Commands to handle service =====
533 533  
534 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
535 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
536 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
537 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
538 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
458 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
459 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
460 +* **Start** dragino_fwd : sudo systemctl start draginofwd
461 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
462 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
539 539  
540 -=== 5.2.2 Basic Station Mode. ===
464 +=== 6. Order Info ===
541 541  
466 + Part Number: **PG1302-XX**  Or  Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
542 542  
543 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
468 +**~ XX:**
544 544  
470 +* 868 (For Bands: EU868,IN865)
471 +* 915 (For Bands: US915,AU915,AS923,KR920)
472 +* 470 (For Band: CN470)
545 545  
546 -In RPI, run the below command to get a Gateway EUI
474 +=== 7. Packing Info ===
547 547  
548 -(% class="box infomessage" %)
549 -(((
550 -**~ ifconfig eth0**
551 -)))
476 +**~ PG1302 Package Includes**:
552 552  
553 -[[image:1651745210205-512.png||height="130" width="621"]]
554 -
555 -
556 -(((
557 -(((
558 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
559 -)))
560 -)))
561 -
562 -
563 -
564 -==== **b). Register the gateway with the Basic Station Mode on the TTN-Stack** ====
565 -
566 -
567 -[[image:image-20230329164417-5.png]]
568 -
569 -
570 -
571 -==== **c). Download the gateway API keys, and then upload them to the gateway.** ====
572 -
573 -
574 -[[image:image-20230329164704-6.png]]
575 -
576 -
577 -==== **d). The status Shows disconnect.** ====
578 -
579 -
580 -[[image:image-20230329165619-7.png||height="568" width="948"]]
581 -
582 -
583 -==== **e.) Uploda API keys into the gateway** ====
584 -
585 -
586 -the User can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/**(%%) there is the station.conf files, and ttnstack directory.
587 -
588 -//**directory tree:**//
589 -
590 -///etc/station/
591 -├── station.conf 
592 -└── ttnstack  ~-~--> ** ttnstack configuration file directory**
593 - ├── cups.trust  ~-~-->  ttnstack auth file
594 - ├── cups.uri  ~-~-->  ttnstack server URI file
595 - └── station.conf  ~-~-~-~-> backup configuration file//
596 -
597 -
598 -
599 -**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
600 -
601 -eg:
602 -
603 -/etc/station/
604 -├── cups.key  ~-~--> uploaded by you
605 -├── lns.key  ~-~--> uploaded by you
606 -├── station.conf
607 -
608 -
609 -==== **f). Configure gateway EUI and server address** ====
610 -
611 -
612 -[[image:image-20230329195650-10.png]]
613 -
614 -
615 -After the user enters the correct parameters, the server will be run automatically
616 -
617 -
618 -Tree Directory:
619 -
620 -/etc/station/
621 -├── cups.key
622 -├── cups.trust
623 -├── cups.uri
624 -├── lns.key
625 -├── start-configure.sh
626 -├── station.conf
627 -└── ttnstack
628 - ├── cups.trust
629 - ├── cups.uri
630 - └── station.conf
631 -
632 -
633 -==== **g). Check station running log** ====
634 -
635 -
636 -tail -f /var/log/station.log
637 -
638 -
639 -[[image:image-20230329201624-11.png]]
640 -
641 -
642 -
643 -= 6. Add GPS support in PG1302 =
644 -
645 -The PG1302 supports GPS:
646 -
647 -[[image:image-20240118160132-1.png||height="270" width="338"]]
648 -
649 -
650 -* **The users can find the GPS device in Raspberry: /dev/ttyS0 or /dev/ttyAMA0**
651 -
652 - [[image:image-20240118160407-2.png||height="71" width="458"]]
653 -
654 -
655 -* **Check the GPS output: cat /dev/ttyS0**
656 -
657 - [[image:image-20240118160454-3.png]]
658 -
659 -
660 -* **Add the GPS to the Semtech UDP package forwarder configuration.**
661 -
662 - [[image:image-20240118160928-4.png||height="426" width="464"]]
663 -
664 -
665 -* **Test GPS function**
666 -
667 -**~ 1.) Stop IoT service: systemctl stop draginofwd**
668 -
669 -
670 -**~ 2.) Run the fwd command and check the output**
671 -
672 -
673 - [[image:image-20240118161109-5.png]]
674 -
675 -
676 -**~ 3.) Trouble Shooting:**
677 -
678 - If you get many WARNING outputs, which should be the GPS location is invalid, you need to adjust the GPS location, it is recommended to put it outdoors
679 -
680 -
681 - [[image:image-20240118161333-6.png]]
682 -
683 -
684 - The user can check the PG1302 board GPS LED status to check the location,
685 -
686 - GPS location is valid  ~-~--> GPS LED will light up
687 -
688 - GPS location is invalid ~-~--> GPS LED will light down
689 -
690 -
691 - [[image:image-20240118162033-7.png]]
692 -
693 -
694 -
695 -= 7. Trouble Shooting =
696 -
697 -(% class="wikigeneratedid" %)
698 -7.1 Failed to start the concentrator how to debug
699 -
700 -
701 ---When the problem "failed to start the concentrator" occurs, the user needs to check whether the I2C and SPI are enabled,--
702 -
703 ---Users can enter the following command to check whether I2C is detected, and the detection of **"60"** is correct.--
704 -
705 -(% class="box infomessage" %)
706 -(((
707 ---**i2cdetect -y 1**--
708 -)))
709 -
710 -**Note: This method has been removed because the i2c had been removed on the latest PG1302.**
711 -
712 -
713 -
714 -Check whether the SPI path of the configuration file is correct,
715 -
716 -(% class="box infomessage" %)
717 -(((
718 -**cat /etc/lora/global_conf.json **
719 -)))
720 -
721 -(% class="wikigeneratedid" %)
722 -[[image:image-20230518092732-2.png||height="378" width="691"]]
723 -
724 -
725 -
726 -= 8. Order Info =
727 -
728 -
729 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
730 -
731 -**~ (% style="color:#0000ff" %)XX:(%%)**
732 -
733 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
734 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
735 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
736 -
737 -= 9. Packing Info =
738 -
739 -
740 -(((
741 -**PG1302 Package Includes**:
742 -)))
743 -
744 -(((
745 745  * PG1302 x 1
746 746  * LoRa Antenna x 1
747 -)))
748 748  
481 +**~ PG1302-PI Package Includes**:
749 749  
750 -
751 -(((
752 -**PG1302-PI Package Includes**:
753 -)))
754 -
755 755  * PG1302 x 1
756 756  * LoRa Antenna x 1
757 757  * RPi3/4 converter PCB
758 758  * Screws to hole converter PCB on RPI.
759 759  
760 -**PG1302-PI Dimension and weight: **
488 +=== 8. Reference ===
761 761  
762 -* Device Size: 18 x 8 x 4 cm
763 -* Weight: 150g
490 +* Datasheet, User Manual & Software Download:
764 764  
765 -= 10. Support =
492 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
766 766  
767 767  
768 -(((
769 -If you are experiencing issues and can't solve, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].
770 -)))
495 +=== 9. Support ===
771 771  
772 -(((
773 -With your question as detail as possible. We will reply and help you in the shortest.
774 -)))
497 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
498 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
499 +
500 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230329164417-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content
image-20230518091900-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -6.8 KB
Content
image-20230518092732-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.1 KB
Content
image-20231115174839-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -80.3 KB
Content
image-20231115180410-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -78.7 KB
Content
image-20240118160132-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -37.2 KB
Content
image-20240118160407-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -7.9 KB
Content
image-20240118160454-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -42.0 KB
Content
image-20240118160928-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -83.8 KB
Content
image-20240118161109-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -178.1 KB
Content
image-20240118161333-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -120.0 KB
Content
image-20240118162033-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -724.0 KB
Content
image-20240122140551-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -334.9 KB
Content