Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 126.1 >
edited by Kilight Cao
on 2023/05/18 09:19
To version < 110.1 >
edited by Xiaoye
on 2022/09/28 18:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -14,11 +14,12 @@
14 14  
15 15  )))
16 16  
17 -= 1. Introduction =
17 += **1. Introduction** =
18 18  
19 -== 1.1 What is PG1302 LoRaWAN Concentrator? ==
20 20  
20 +== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
21 21  
22 +
22 22  (((
23 23  The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
24 24  )))
... ... @@ -32,11 +32,12 @@
32 32  )))
33 33  
34 34  
35 -== 1.2 Features ==
36 36  
37 +== **1.2 Features** ==
37 37  
39 +
38 38  * Base on Semtech SX1302 solution
39 -* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
41 +* Support Raspberry Pi 3B/3B+/4
40 40  * Up to -140dBm sensitivity
41 41  * Support 3.3v and 5v.
42 42  * Mini-PCIe Interface
... ... @@ -44,25 +44,25 @@
44 44  
45 45  
46 46  
47 -== 1.3 General Interfaces for PG1302 ==
49 +== **1.3 General Interfaces for PG1302** ==
48 48  
49 49  
50 50  * SPI interface for LoRa
51 51  * Power Input: 5v, 1A
52 52  * 1 x I-PEX for LoRa
53 -* Working Temperature: -40 ℃ ~~ 80℃
54 54  
55 55  
56 56  
57 -== 1.4 Pin Mapping ==
58 +== **1.4 Pin Mapping** ==
58 58  
59 59  
60 60   [[image:1651743282627-547.png||height="402" width="425"]]
61 61  
62 62  
63 -== 1.5 LEDs ==
64 64  
65 +== **1.5 LEDs** ==
65 65  
67 +
66 66  (((
67 67  TX: Blink when transmit a packet
68 68  RX: Blink when receive a packet
... ... @@ -70,17 +70,19 @@
70 70  )))
71 71  
72 72  
73 -== 1.6 Power Consumption ==
74 74  
76 +== **1.6 Power Consumption** ==
75 75  
78 +
76 76  <300mA @ 3.3v.
77 77  
78 78  Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
79 79  
80 80  
81 -== 1.7 Applications ==
82 82  
85 +== **1.7 Applications** ==
83 83  
87 +
84 84  * Smart Buildings & Home Automation
85 85  * Logistics and Supply Chain Management
86 86  * Smart Metering
... ... @@ -90,11 +90,12 @@
90 90  
91 91  
92 92  
93 -= 2. Example: Set up as LoRaWAN gateway =
97 += **2. Example: Set up as LoRaWAN gateway** =
94 94  
95 -== 2.1 System structure ==
96 96  
100 +== **2.1 System structure** ==
97 97  
102 +
98 98  (((
99 99  This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
100 100  
... ... @@ -104,45 +104,41 @@
104 104  [[image:1651743698677-436.png||height="457" width="686"]]
105 105  
106 106  
107 -== 2.2 Hardware Installation ==
108 108  
113 +== **2.2 Hardware Installation** ==
109 109  
115 +
110 110  (% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
111 111  
112 112  [[image:image-20220621104746-1.png||height="381" width="451"]]
113 113  
114 114  
115 -= 3. Install the software? =
116 116  
122 += **3. Install the software?** =
117 117  
118 -**Raspberry Pi 3B/3B+/4,**
119 119  
125 +There are two ways to install the software in RPi4 to use PG1302.
126 +
120 120  * Flash SD card with Dragino pre-build image which supports Web UI.
121 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
128 +* Install Lora packet forwarder in existing RPi OS.
122 122  
123 -**TinkerBoard2/2S, **
124 124  
125 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
126 126  
127 -**Orange Pi PC/PC PLUS.**
132 += **4. Flash with pre-build image** =
128 128  
129 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
130 130  
135 +== **4.1 Download the dragino image for RPI** ==
131 131  
132 132  
133 -= 4. Flash with pre-build image =
134 -
135 -== 4.1 Download the dragino image for RPI ==
136 -
137 -
138 138  (((
139 139  Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
140 140  )))
141 141  
142 142  
143 -== 4.2 Flash the image to an SD card ==
144 144  
144 +== **4.2 Flash the image to an SD card** ==
145 145  
146 +
146 146  Flash the image to the SD card:
147 147  
148 148  [[image:1651744119133-233.png||height="373" width="621"]]
... ... @@ -151,9 +151,10 @@
151 151  (% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
152 152  
153 153  
154 -== 4.3 Access the Linux console ==
155 155  
156 +== **4.3 Access the Linux console** ==
156 156  
158 +
157 157  (((
158 158  Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
159 159  )))
... ... @@ -190,11 +190,13 @@
190 190  [[image:1651744358515-107.png||height="366" width="581"]]
191 191  
192 192  
193 -== 4.4 Access the WebUI of RPi4 ==
194 194  
195 -=== 4.4.1 Home page ===
196 +== **4.4 Access the WebUI of RPi4** ==
196 196  
197 197  
199 +=== **4.4.1 Home page** ===
200 +
201 +
198 198  (((
199 199  Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
200 200  You will see the login interface of RPI as shown below.
... ... @@ -211,9 +211,10 @@
211 211  [[image:1651744457761-993.png||height="352" width="621"]]
212 212  
213 213  
214 -=== 4.4.2 LoRa Page ===
215 215  
219 +=== **4.4.2 LoRa Page** ===
216 216  
221 +
217 217  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
218 218  
219 219  
... ... @@ -230,11 +230,13 @@
230 230  (% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
231 231  
232 232  
233 -=== 4.4.3 LoRaWAN Page ===
234 234  
235 -==== 4.4.3.1 Semtech UDP ====
239 +=== **4.4.3 LoRaWAN Page** ===
236 236  
237 237  
242 +==== **4.4.3.1 Semtech UDP** ====
243 +
244 +
238 238  [[image:1651744767914-283.png||height="352" width="621"]]
239 239  
240 240  
... ... @@ -241,9 +241,10 @@
241 241  (% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
242 242  
243 243  
244 -==== 4.4.3.2 Basic Station ====
245 245  
252 +==== **4.4.3.2 Basic Station** ====
246 246  
254 +
247 247  [[image:1651744890629-683.png||height="380" width="621"]]
248 248  
249 249  
... ... @@ -250,11 +250,13 @@
250 250  (% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
251 251  
252 252  
253 -=== 4.4.4 LogRead ===
254 254  
255 -==== 4.4.4.1 LoRa Log ====
262 +=== **4.4.4 LogRead** ===
256 256  
257 257  
265 +==== **4.4.4.1 LoRa Log** ====
266 +
267 +
258 258  [[image:1651744955955-452.png||height="571" width="621"]]
259 259  
260 260  
... ... @@ -261,55 +261,33 @@
261 261  Show the frequency for LoRa Radio and traffics.
262 262  
263 263  
264 -==== 4.4.4.2 System Log ====
265 265  
275 +==== **4.4.4.2 System Log** ====
266 266  
277 +
267 267  Show system log.
268 268  
280 +
269 269  [[image:1651745003470-264.png||height="477" width="621"]]
270 270  
271 271  
272 -==== 4.4.4.3 Record Log ====
273 273  
285 +==== **4.4.4.3 Record Log** ====
274 274  
287 +
275 275  **Record the system log.**
276 276  
290 +
277 277  [[image:1651745069814-662.png||height="144" width="621"]]
278 278  
279 279  
280 -= 5. Install stand-alone LoRa Packet Forwarder =
281 281  
282 -== 5.1 Choose the right installation package for your OS ==
295 += **5. Install stand-alone LoRa Packet Forwarder** =
283 283  
284 284  
285 -(((
286 -**draginofwd-32bit (RPI, Orange PI)**
298 +== **5.1 OS requirement** ==
287 287  
288 -**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
289 289  
290 -**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
291 -
292 -
293 -**dragino-64bit (RPI, Orange PI)**
294 -
295 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
296 -)))
297 -
298 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
299 -
300 -
301 -**dragino-tiker-32bit (Tinker Board)**
302 -
303 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
304 -
305 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
306 -
307 -
308 -**Install details:**
309 -
310 -[[image:image-20220928181226-1.png||height="218" width="1100"]]
311 -
312 -
313 313  RPI in this example is RPI model 4B with fresh Raspbian OS install.
314 314  
315 315  (% class="box" %)
... ... @@ -329,25 +329,10 @@
329 329  )))
330 330  
331 331  
332 -== 5.2 Select the mode of connection to the server ==
333 333  
321 +== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
334 334  
335 -The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
336 336  
337 -The User can choose one of the methods as the connection mode.
338 -
339 -
340 -**~1. Semtech UDP Mode  ~-~-> 5.2.1**
341 -
342 -**2. Basic Station Mode  ~-~-> 5.2.2**
343 -
344 -
345 -=== 5.2.1 Semtech UDP Mode ===
346 -
347 -
348 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
349 -
350 -
351 351  In RPI, run the below command to get a Gateway ID
352 352  
353 353  (% class="box infomessage" %)
... ... @@ -362,10 +362,6 @@
362 362  (((
363 363  We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
364 364  
365 -
366 -
367 -==== **b). Input this Gateway EUI to the TTN-Stack** ====
368 -
369 369  
370 370  )))
371 371  )))
... ... @@ -375,95 +375,100 @@
375 375  [[image:1651745306744-481.png||height="478" width="621"]]
376 376  
377 377  
347 +After set up, the status should show not connected as below:
378 378  
379 -==== **c). After Register, the status should show not connected as below:** ====
380 -
381 -
382 382  [[image:1651745366987-458.png||height="363" width="621"]]
383 383  
384 384  
385 385  
386 -==== **d). Enable SPI and I2C on your device** ====
353 +=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
387 387  
388 388  
389 -**the below example is using Raspberry 4B.**
356 +Enable SPI and I2C first:
390 390  
358 +a)  SPI needs to be enabled on the Raspberry Pi
391 391  
392 392  Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
393 393  
394 394  [[image:1651745476754-240.png||height="234" width="629"]]
395 395  
396 -
397 397  [[image:image-20220505181135-1.png]]
398 398  
399 -
400 400  [[image:image-20220505181135-2.png||height="229" width="622"]]
401 401  
402 402  
403 403  
404 -==== **e). Access the root account:** ====
370 +In RPI, Fist: Enter the root account:
405 405  
406 406  (((
407 407  [[image:1651745583363-614.png||height="151" width="732"]]
408 408  
409 -
410 410  
411 411  )))
412 412  
413 -==== **f). Modify the configuration of FWD** ====
414 414  
379 +Select the appropriate device version to download
415 415  
381 +
416 416  (((
417 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
383 +draginofwd-32bit
384 +
385 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
386 +
387 +
388 +dragino-64bit
418 418  )))
419 419  
420 -(((
421 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
391 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
422 422  
423 423  
424 -the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
394 +dragino-tiker-32bit
425 425  
426 -/etc/lora/
427 -├── cfg-302  ~-~--> global configuration file
428 -├── devskey  ~-~--> Database
429 -├── global_conf.json  ~-~--> Frequency plan for current applications
430 -└── local_conf.json  ~-~--> Local fwd configuration
396 +wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
431 431  
432 -At default, the users need to change two configurations file: global_conf.json and local_conf.json.
433 433  
399 +(((
400 +
434 434  
435 -===== **1.) Configure gateway EUI and server address, port for fwd** =====
402 +[[image:image-20220928181226-1.png]]
436 436  
437 437  
438 438  )))
439 439  
440 -[[image:1651745709709-887.png||height="820" width="621"]]
407 +=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
441 441  
442 442  
443 -**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
410 +(((
411 +After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
412 +)))
444 444  
414 +(((
415 +The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
445 445  
446 -===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
417 +
418 +)))
447 447  
420 +[[image:1651745709709-887.png||height="820" width="621"]]
448 448  
449 -the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
450 450  
451 -[[image:1651745838008-820.png||height="650" width="621"]]
423 +User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
452 452  
425 +And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
453 453  
454 -If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
427 +[[image:1651745838008-820.png||height="650" width="621"]]
455 455  
456 -**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
457 457  
430 +* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
458 458  
432 +**~ 1). Chose your need the name of region frequency.**
459 459  
460 -====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
461 461  
462 462  [[image:1651745867516-322.png||height="83" width="740"]]
463 463  
464 464  
465 -====== **Override the global_conf.json** ======
466 466  
439 +**~ 2). Use this command to copy it.**
440 +
467 467  (% class="box infomessage" %)
468 468  (((
469 469  **cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
... ... @@ -472,20 +472,30 @@
472 472  [[image:1651745984006-868.png||height="87" width="745"]]
473 473  
474 474  
475 -==== (% style="color:inherit; font-family:inherit; font-size:23px" %)**g). Running the Fwd Server**(%%) ====
449 +* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
476 476  
477 477  
452 +
453 +=== **5.2.3 Check result** ===
454 +
455 +
478 478  (((
479 -Run the below command to restart the dragino_fwd:
457 +Run below command to restart the dragino_fwd:
480 480  )))
481 481  
482 482  (((
483 483  (% class="box infomessage" %)
484 484  (((
463 +**sudo systemctl stop draginofwd**
464 +)))
465 +
466 +(% class="box infomessage" %)
467 +(((
485 485  **sudo systemctl start draginofwd**
486 486  )))
487 487  )))
488 488  
472 +
489 489  (((
490 490  debug check the ruing status of fwd:
491 491  )))
... ... @@ -500,13 +500,15 @@
500 500  [[image:1651746045057-414.png||height="193" width="729"]]
501 501  
502 502  
503 -Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
504 504  
488 +The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
489 +
490 +
505 505  [[image:1651746078253-168.png||height="372" width="621"]]
506 506  
507 507  
508 508  
509 -Get the draginofwd real-time running log:
495 +We can check dragino_fwd running states in RPi by running:
510 510  
511 511  (% class="box infomessage" %)
512 512  (((
... ... @@ -522,8 +522,10 @@
522 522  [[image:1651746139304-966.png||height="326" width="621"]]
523 523  
524 524  
525 -==== **h). Commands to handle service** ====
526 526  
512 +=== **5.2.4 Commands to handle service** ===
513 +
514 +
527 527  * (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
528 528  * (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
529 529  * (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
... ... @@ -532,111 +532,9 @@
532 532  
533 533  
534 534  
535 -=== 5.2.2 Basic Station Mode. ===
523 += **6. Order Info** =
536 536  
537 537  
538 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
539 -
540 -
541 -In RPI, run the below command to get a Gateway EUI
542 -
543 -(% class="box infomessage" %)
544 -(((
545 -**~ ifconfig eth0**
546 -)))
547 -
548 -[[image:1651745210205-512.png||height="130" width="621"]]
549 -
550 -
551 -(((
552 -(((
553 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
554 -)))
555 -)))
556 -
557 -
558 -
559 -==== **b). Register the gateway with the Basic Station Mode on the TTN-Stack** ====
560 -
561 -
562 -[[image:image-20230329164417-5.png]]
563 -
564 -
565 -
566 -==== **c). Download the gateway API keys, and then upload them to the gateway.** ====
567 -
568 -
569 -[[image:image-20230329164704-6.png]]
570 -
571 -
572 -==== **d). The status Shows disconnect.** ====
573 -
574 -
575 -[[image:image-20230329165619-7.png||height="568" width="948"]]
576 -
577 -
578 -==== **e.) Uploda API keys into the gateway** ====
579 -
580 -
581 -the User can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/**(%%) there is the station.conf files, and ttnstack directory.
582 -
583 -//**directory tree:**//
584 -
585 -///etc/station/
586 -├── station.conf 
587 -└── ttnstack  ~-~--> ** ttnstack configuration file directory**
588 - ├── cups.trust  ~-~-->  ttnstack auth file
589 - ├── cups.uri  ~-~-->  ttnstack server URI file
590 - └── station.conf  ~-~-~-~-> backup configuration file//
591 -
592 -
593 -
594 -**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
595 -
596 -eg:
597 -
598 -/etc/station/
599 -├── cups.key  ~-~--> uploaded by you
600 -├── lns.key  ~-~--> uploaded by you
601 -├── station.conf
602 -
603 -
604 -==== **f). Configure gateway EUI and server address** ====
605 -
606 -
607 -[[image:image-20230329195650-10.png]]
608 -
609 -
610 -After the user enters the correct parameters, the server will be run automatically
611 -
612 -
613 -Tree Directory:
614 -
615 -/etc/station/
616 -├── cups.key
617 -├── cups.trust
618 -├── cups.uri
619 -├── lns.key
620 -├── start-configure.sh
621 -├── station.conf
622 -└── ttnstack
623 - ├── cups.trust
624 - ├── cups.uri
625 - └── station.conf
626 -
627 -
628 -==== **g). Check station running log** ====
629 -
630 -
631 -tail -f /var/log/station.log
632 -
633 -
634 -[[image:image-20230329201624-11.png]]
635 -
636 -
637 -= 6. Order Info =
638 -
639 -
640 640  Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
641 641  
642 642  **~ (% style="color:#0000ff" %)XX:(%%)**
... ... @@ -647,20 +647,25 @@
647 647  
648 648  
649 649  
650 -= 7. Packing Info =
536 += **7. Packing Info** =
651 651  
652 -
653 653  (((
539 +
540 +
654 654  **PG1302 Package Includes**:
655 655  )))
656 656  
657 657  (((
545 +(((
658 658  * PG1302 x 1
659 659  * LoRa Antenna x 1
660 660  )))
549 +)))
661 661  
662 -
663 663  (((
552 +
553 +
554 +
664 664  **PG1302-PI Package Includes**:
665 665  )))
666 666  
... ... @@ -677,7 +677,8 @@
677 677  
678 678  
679 679  
680 -= 8. Support =
571 +(((
572 += **8. Support** =
681 681  
682 682  
683 683  (((
... ... @@ -690,4 +690,8 @@
690 690  
691 691  (((
692 692  With your question as detail as possible. We will reply and help you in the shortest.
585 +
586 +
587 +
693 693  )))
589 +)))
image-20230329164417-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content
image-20230518091900-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -6.8 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0