Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 125.3 >
edited by Xiaoling
on 2023/03/30 16:29
To version < 77.1 >
edited by Xiaoling
on 2022/05/06 14:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 - LoRaWAN Concentrator User Manual
1 +PG1302
Content
... ... @@ -1,86 +1,89 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents：**
8 8  
10 +
11 +
12 +**PG1302 LoRaWAN Concentrator User Manual**
13 +
14 +
15 +
16 +
17 +
9 9  {{toc/}}
10 10  
11 11  
21 +----
22 +
12 12  (% class="wikigeneratedid" id="H" %)
13 13  (((
14 14  
15 15  )))
16 16  
17 -= 1. Introduction =
28 +=== 1. Introduction ===
18 18  
19 -== 1.1 What is PG1302 LoRaWAN Concentrator? ==
30 +==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
20 20  
32 +(((
33 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 +)))
21 21  
22 22  (((
23 -The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
24 24  )))
25 25  
26 26  (((
27 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
41 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
28 28  )))
29 29  
30 30  (((
31 -PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
45 +(((
46 +
32 32  )))
48 +)))
33 33  
50 +==== 1.2 Features ====
34 34  
35 -== 1.2 Features ==
36 -
37 -
38 38  * Base on Semtech SX1302 solution
39 -* Support Raspberry Pi 3B/3B+/4, TinkerBoard2/2S, Orange Pi Pc/PC PLUS.
53 +* Support Raspberry Pi 3B/3B+/4
40 40  * Up to -140dBm sensitivity
41 41  * Support 3.3v and 5v.
42 42  * Mini-PCIe Interface
43 43  * Converter board to support Raspberry Pi
44 44  
59 +==== 1.3 General Interfaces ====
45 45  
46 -
47 -== 1.3 General Interfaces for PG1302 ==
48 -
49 -
50 50  * SPI interface for LoRa
51 51  * Power Input: 5v, 1A
52 52  * 1 x I-PEX for LoRa
53 -* Working Temperature: -40 ℃ ~~ 80℃
54 54  
65 +==== 1.4 Pin Mapping ====
55 55  
56 -
57 -== 1.4 Pin Mapping ==
58 -
59 -
60 60   [[image:1651743282627-547.png||height="402" width="425"]]
61 61  
62 62  
63 -== 1.5 LEDs ==
64 64  
71 +==== 1.5 LEDs ====
65 65  
66 -(((
67 -TX: Blink when transmit a packet
68 -RX: Blink when receive a packet
69 -Config: Always ON
70 -)))
73 + TX: Blink when transmit a packet
71 71  
75 + RX: Blink when receive a packet
72 72  
73 -== 1.6 Power Consumption ==
77 + Config: Always ON
74 74  
75 75  
76 -<300mA @ 3.3v.
80 +==== 1.6 Power Consumption ====
77 77  
78 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
82 + TBD
79 79  
80 80  
81 -== 1.7 Applications ==
85 +==== 1.7 Applications ====
82 82  
83 -
84 84  * Smart Buildings & Home Automation
85 85  * Logistics and Supply Chain Management
86 86  * Smart Metering
... ... @@ -88,606 +88,410 @@
88 88  * Smart Cities
89 89  * Smart Factory
90 90  
94 +=== 2. Example: Set up as LoRaWAN gateway. ===
91 91  
96 +==== 2.1 System structure ====
92 92  
93 -= 2. Example: Set up as LoRaWAN gateway =
98 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
94 94  
95 -== 2.1 System structure ==
100 + Set up method for other server are similar。
96 96  
97 -
98 -(((
99 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
100 -
101 -
102 -)))
103 -
102 +(% style="text-align:center" %)
104 104  [[image:1651743698677-436.png||height="457" width="686"]]
105 105  
106 106  
107 -== 2.2 Hardware Installation ==
108 108  
107 +==== 2.2 Hardware Installation ====
109 109  
110 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
109 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
111 111  
112 -[[image:image-20220621104746-1.png||height="381" width="451"]]
111 +(% style="text-align:center" %)
112 +[[image:1651743803032-803.png]]
113 113  
114 114  
115 -= 3. Install the software? =
116 116  
116 +=== 3. Install the software? ===
117 117  
118 -**Raspberry Pi 3B/3B+/4,**
118 + There are two ways to install software in RPi4 to use PG1302.
119 119  
120 -* Flash SD card with Dragino pre-build image which supports Web UI.
121 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in existing RPi OS.
120 +* Flash SD card with Dragino pre-build image which support Web UI.
121 +* Install lora packet forwarder in existing RPi OS.
122 122  
123 -**TinkerBoard2/2S, **
123 +=== 4. Flash with pre-build image ===
124 124  
125 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
125 +==== 4.1 Download the dragino image for RPI ====
126 126  
127 -**Orange Pi PC/PC PLUS.**
127 + Download PG1302_for_Rpi4_64_with_webui from
128 128  
129 -* Install [[Dragino-FWD>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/PG1302/#H5.2.2.A0Selecttheappropriatedeviceversiontodownload:]] in the existing OS.
129 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
130 130  
131 131  
132 +==== 4.2 Flash the image to SD card ====
132 132  
133 -= 4. Flash with pre-build image =
134 + Flash the image to SD card:
134 134  
135 -== 4.1 Download the dragino image for RPI ==
136 +(% style="text-align:center" %)
137 +[[image:1651744119133-233.png||height="373" width="621"]]
136 136  
139 + Note: Download the flash tool following this link
137 137  
138 -(((
139 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
140 -)))
141 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
141 141  
142 142  
143 -== 4.2 Flash the image to an SD card ==
144 +==== 4.3 Access the Linux console ====
144 144  
146 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
145 145  
146 -Flash the image to the SD card:
148 +Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
147 147  
148 -[[image:1651744119133-233.png||height="373" width="621"]]
150 +(% style="text-align:center" %)
151 +[[image:1651744193675-591.png||height="450" width="466"]]
149 149  
150 150  
151 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
154 + The account details for Web Login are:
152 152  
156 +**~ User Name: root**
153 153  
154 -== 4.3 Access the Linux console ==
158 +**~ Password:   dragino**
155 155  
156 156  
157 -(((
158 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
159 -)))
161 +**~ Backup account**
160 160  
163 +**~ Pi/dragino**
161 161  
162 -[[image:1651744193675-591.png||height="450" width="466"]]
163 163  
164 -The account details for Web Login are:
166 + After log in, you will be in the Linux console and type command here.
165 165  
166 -(((
167 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
168 -)))
168 +(% style="text-align:center" %)
169 +[[image:1651744358515-107.png||height="366" width="581"]]
169 169  
170 -(((
171 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
172 -)))
173 173  
174 -(((
175 -
176 -)))
172 +==== 4.4 Access the WebUI of RPi4. ====
177 177  
178 -(((
179 -**~ (% style="color:#0000ff" %)Backup account(%%)**
180 -)))
174 +===== 4.4.1 Home page =====
181 181  
182 -(((
183 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
176 + Open a browser on the PC and type the RPI ip address
184 184  
185 -
186 -)))
178 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
187 187  
188 -After logging in, you will be in the Linux console and type the command here.
189 189  
190 -[[image:1651744358515-107.png||height="366" width="581"]]
181 + You will see the login interface of RPI as shown below.
191 191  
183 + The account details for Web Login are:
192 192  
193 -== 4.4 Access the WebUI of RPi4 ==
185 +**~ User Name: root**
194 194  
195 -=== 4.4.1 Home page ===
187 +**~ Password:   dragino**
196 196  
189 +(% style="text-align:center" %)
190 +[[image:1651744457761-993.png||height="352" width="621"]]
197 197  
198 -(((
199 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
200 -You will see the login interface of RPI as shown below.
201 -The account details for Web Login are:
202 -)))
203 203  
204 -(((
205 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
206 -(% style="color:#0000ff" %)** Password:   dragino**
193 +===== 4.4.2 LoRa Page =====
207 207  
208 -
209 -)))
195 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
210 210  
211 -[[image:1651744457761-993.png||height="352" width="621"]]
197 +(% style="text-align:center" %)
198 +[[image:1651744554845-970.png||height="328" width="621"]]
212 212  
213 213  
214 -=== 4.4.2 LoRa Page ===
201 + Different PG1302 hardware version can support different frequency range:
215 215  
203 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
216 216  
217 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
205 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
218 218  
219 219  
220 -[[image:1651744554845-970.png||height="328" width="621"]]
208 + After user choose the frequency plan, he can see the actually frequency in used by checking the
221 221  
210 + page LogRead ~-~-> LoRa Log
222 222  
223 -Different PG1302 hardware version can support different frequency range:
212 + Note *: See this instruction for how to customize frequency band
224 224  
225 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
226 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
214 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
227 227  
228 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
229 229  
230 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
217 +===== 4.4.3 LoRaWAN Page =====
231 231  
219 +====== 4.4.3.1 Semtech UDP ======
232 232  
233 -=== 4.4.3 LoRaWAN Page ===
234 234  
235 -==== 4.4.3.1 Semtech UDP ====
236 -
237 -
222 +(% style="text-align:center" %)
238 238  [[image:1651744767914-283.png||height="352" width="621"]]
239 239  
240 240  
241 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
242 242  
227 + Note *: See this instruction for how to configure TTN.
243 243  
244 -==== 4.4.3.2 Basic Station ====
229 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
245 245  
246 246  
232 +====== 4.4.3.2 Basic Station ======
233 +
234 +(% style="text-align:center" %)
247 247  [[image:1651744890629-683.png||height="380" width="621"]]
248 248  
249 249  
250 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
238 + Note *: See this instruction for how to configure TTN.
251 251  
240 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
252 252  
253 -=== 4.4.4 LogRead ===
254 254  
255 -==== 4.4.4.1 LoRa Log ====
243 +===== 4.4.4 LogRead =====
256 256  
245 +====== 4.4.4.1 LoRa Log ======
257 257  
247 +(% style="text-align:center" %)
258 258  [[image:1651744955955-452.png||height="571" width="621"]]
259 259  
260 260  
261 -Show the frequency for LoRa Radio and traffics.
251 + Show the frequency for LoRa Radio and traffics.
262 262  
263 263  
264 -==== 4.4.4.2 System Log ====
254 +====== 4.4.4.2 System Log ======
265 265  
256 + Show system log.
266 266  
267 -Show system log.
268 -
258 +(% style="text-align:center" %)
269 269  [[image:1651745003470-264.png||height="477" width="621"]]
270 270  
271 271  
272 -==== 4.4.4.3 Record Log ====
273 273  
263 +====== 4.4.4.3 Record Log ======
274 274  
275 -**Record the system log.**
265 +**~ Record the system log.**
276 276  
267 +(% style="text-align:center" %)
277 277  [[image:1651745069814-662.png||height="144" width="621"]]
278 278  
279 279  
280 -= 5. Install stand-alone LoRa Packet Forwarder =
271 +=== 5. Install stand alone LoRa Packet Forwarder. ===
281 281  
282 -== 5.1 Choose the right installation package for your OS ==
273 +==== 5.1 OS requirement ====
283 283  
275 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
284 284  
285 -(((
286 -**draginofwd-32bit (RPI, Orange PI)**
287 -
288 -**Download URL:** https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb
289 -
290 -**Linux Command:** wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
291 -
292 -
293 -**dragino-64bit (RPI, Orange PI)**
294 -
295 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb
296 -)))
297 -
298 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
299 -
300 -
301 -**dragino-tiker-32bit (Tinker Board)**
302 -
303 -**Download URL: **https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb
304 -
305 -**Linux Command: **wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
306 -
307 -
308 -**Install details:**
309 -
310 -[[image:image-20220928181226-1.png||height="218" width="1100"]]
311 -
312 -
313 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
314 -
315 -(% class="box" %)
316 -(((
317 317   pi@raspberrypi:~~$ cat /etc/os-release
278 +
318 318   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
280 +
319 319   NAME="Raspbian GNU/Linux"
282 +
320 320   VERSION_ID="8"
284 +
321 321   VERSION="8 (jessie)"
286 +
322 322   ID=raspbian
288 +
323 323   ID_LIKE=debian
290 +
324 324   HOME_URL="http:~/~/www.raspbian.org/"
292 +
325 325   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
294 +
326 326   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
327 327  
328 -
329 -)))
330 330  
298 +==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
331 331  
332 -== 5.2 Select the mode of connection to the server ==
300 + In RPI, run below command to get a Gateway ID
333 333  
302 + ifconfig eth0
334 334  
335 -The Dragino LoRa Packet Forware supports the Semtech UDP and Basic Station mode.
336 -
337 -The User can choose one of the methods as the connection mode.
338 -
339 -
340 -**~1. Semtech UDP Mode  ~-~-> 5.2.1**
341 -
342 -**2. Basic Station Mode  ~-~-> 5.2.2**
343 -
344 -
345 -=== 5.2.1 Semtech UDP Mode ===
346 -
347 -
348 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
349 -
350 -
351 -In RPI, run the below command to get a Gateway ID
352 -
353 -(% class="box infomessage" %)
354 -(((
355 -**~ ifconfig eth0**
356 -)))
357 -
304 +(% style="text-align:center" %)
358 358  [[image:1651745210205-512.png||height="130" width="621"]]
359 359  
360 360  
361 -(((
362 -(((
363 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
308 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
364 364  
310 + Make sure to select legacy packet forwarder.
365 365  
312 +(% style="text-align:center" %)
313 +[[image:1651745267862-321.png||height="526" width="621"]]
366 366  
367 -==== **b). Input this Gateway EUI to the TTN-Stack** ====
368 368  
369 -
370 -)))
371 -)))
372 372  
373 -[[image:1651745267862-321.png||height="526" width="621"]]
374 -
317 +(% style="text-align:center" %)
375 375  [[image:1651745306744-481.png||height="478" width="621"]]
376 376  
320 +After set up, the status should show not connected as below:
377 377  
378 -
379 -==== **c). After Register, the status should show not connected as below:** ====
380 -
381 -
322 +(% style="text-align:center" %)
382 382  [[image:1651745366987-458.png||height="363" width="621"]]
383 383  
384 384  
326 +===== 5.2.1 Download and install LoRaWAN packet forwarder =====
385 385  
386 -==== **d). Enable SPI and I2C on your device** ====
328 + Enable SPI and I2C first:
387 387  
330 + a)SPI needs to be enabled on the Raspberry Pi
388 388  
389 -**the below example is using Raspberry 4B.**
332 + Run sudo raspi-config to open the config window
390 390  
334 +(% style="text-align:center" %)
335 +[[image:1651745476754-240.png||height="235" width="631"]]
391 391  
392 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
393 393  
394 -[[image:1651745476754-240.png||height="234" width="629"]]
395 -
396 -
338 +(% style="text-align:center" %)
397 397  [[image:image-20220505181135-1.png]]
398 398  
341 +(% style="text-align:center" %)
342 +[[image:image-20220505181135-2.png]]
399 399  
400 -[[image:image-20220505181135-2.png||height="229" width="622"]]
401 401  
402 402  
403 403  
404 -==== **e). Access the root account:** ====
347 + In RPI , Fist: Enter root account:
405 405  
406 -(((
407 -[[image:1651745583363-614.png||height="151" width="732"]]
349 +(% style="text-align:center" %)
350 +[[image:1651745583363-614.png]]
408 408  
409 409  
410 -
411 -)))
353 + and then run:
412 412  
413 -==== **f). Modify the configuration of FWD** ====
355 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
414 414  
357 + chmod +x ./auto_install.sh
415 415  
416 -(((
417 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
418 -)))
359 + ./auto_install.sh
419 419  
420 -(((
421 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
361 +(% style="text-align:center" %)
362 +[[image:1651745611629-818.png]]
422 422  
423 423  
424 -the User can find the lora configuration directory in (% style="color:#0000ff" %)**/etc/lora/**(%%) there are the cfg-302 directory and the global_conf.json, and local_conf.json files.
365 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
425 425  
426 -/etc/lora/
427 -├── cfg-302  ~-~--> global configuration file
428 -├── devskey  ~-~--> Database
429 -├── global_conf.json  ~-~--> Frequency plan for current applications
430 -└── local_conf.json  ~-~--> Local fwd configuration
367 + You can get these output:
431 431  
432 -At default, the users need to change two configurations file: global_conf.json and local_conf.json.
369 +(% style="text-align:center" %)
370 +[[image:1651745657252-173.png||height="426" width="621"]]
433 433  
434 434  
435 -===== **1.) Configure gateway EUI and server address, port for fwd** =====
373 +===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
436 436  
437 -
438 -)))
375 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
439 439  
377 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
378 +
379 +(% style="text-align:center" %)
440 440  [[image:1651745709709-887.png||height="820" width="621"]]
441 441  
442 442  
443 -**Note: Users can find the TTN v3 server address from [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]**
383 + User can find the TTN v3 server address from:
444 444  
385 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
445 445  
446 -===== **2). Override the global_conf.json file by selecting the appropriate frequency plan for your region in cfg-302** =====
447 447  
388 + And the default frequency band is US915 in **global_conf.json** file.
448 448  
449 -the default frequency band is US915 in the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
450 -
390 +(% style="text-align:center" %)
451 451  [[image:1651745838008-820.png||height="650" width="621"]]
452 452  
453 453  
454 -If the user wants to change to other frequency bands, the User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
394 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
455 455  
456 -**//eg: cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json //**
396 + 1).Chose your need the name of region frequency.
457 457  
398 +(% style="text-align:center" %)
399 +[[image:1651745867516-322.png]]
458 458  
459 459  
460 -====== **Selecting the appropriate frequency plan for your region in cfg-302.** ======
402 + 2). Use this command to copy it.
461 461  
462 -[[image:1651745867516-322.png||height="83" width="740"]]
404 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
463 463  
406 +(% style="text-align:center" %)
407 +[[image:1651745984006-868.png]]
464 464  
465 -====== **Override the global_conf.json** ======
466 466  
467 -(% class="box infomessage" %)
410 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
411 +
412 +(% class="wikigeneratedid" %)
468 468  (((
469 -**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
414 +
470 470  )))
471 471  
472 -[[image:1651745984006-868.png||height="87" width="745"]]
417 +===== 5.2.3 Check result =====
473 473  
419 + Run below command to restart the dragino_fwd:
474 474  
475 -==== (% style="color:inherit; font-family:inherit; font-size:23px" %)**g). Running the Fwd Server**(%%) ====
421 + sudo systemctl stop draginofwd
476 476  
423 + sudo systemctl start draginofwd
477 477  
478 -(((
479 -Run the below command to restart the dragino_fwd:
480 -)))
425 + debug check the ruing status of fwd:
481 481  
482 -(((
483 -(% class="box infomessage" %)
484 -(((
485 -**sudo systemctl start draginofwd**
486 -)))
487 -)))
427 + sudo systemctl status draginofwd
488 488  
489 -(((
490 -debug check the ruing status of fwd:
491 -)))
429 +(% style="text-align:center" %)
430 +[[image:1651746045057-414.png]]
492 492  
493 -(((
494 -(% class="box infomessage" %)
495 -(((
496 -**sudo systemctl status draginofwd**
497 -)))
498 -)))
499 499  
500 -[[image:1651746045057-414.png||height="193" width="729"]]
433 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
501 501  
502 -
503 -Wait for a few minutes, the gateway will be online/active on the TTN-Stack.
504 -
435 +(% style="text-align:center" %)
505 505  [[image:1651746078253-168.png||height="372" width="621"]]
506 506  
507 507  
508 508  
509 -Get the draginofwd real-time running log:
440 + We can check dragino_fwd running states in RPi by running:
510 510  
511 -(% class="box infomessage" %)
512 -(((
513 -**~ sudo journalctl -u draginofwd -f**
514 -)))
442 + //**sudo journalctl -u draginofwd -f**//
515 515  
516 -[[image:1651746111963-838.png||height="184" width="730"]]
444 +(% style="text-align:center" %)
445 +[[image:1651746111963-838.png]]
517 517  
518 518  
519 519  
520 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
449 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
521 521  
451 +(% style="text-align:center" %)
522 522  [[image:1651746139304-966.png||height="326" width="621"]]
523 523  
524 524  
525 -==== **h). Commands to handle service** ====
526 526  
527 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
528 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
529 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
530 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
531 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
456 +===== 5.2.4 Commands to handle service =====
532 532  
458 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
459 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
460 +* **Start** dragino_fwd : sudo systemctl start draginofwd
461 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
462 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
533 533  
464 +=== 6. Order Info ===
534 534  
535 -=== 5.2.2 Basic Station Mode. ===
466 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
536 536  
468 +**~ XX:**
537 537  
538 -==== **a). Get a gateway EUI from the device ETH MAC.** ====
470 +* 868 (For Bands: EU868,IN865)
471 +* 915 (For Bands: US915,AU915,AS923,KR920)
472 +* 470 (For Band: CN470)
539 539  
474 +=== 7. Packing Info ===
540 540  
541 -In RPI, run the below command to get a Gateway EUI
476 +**~ PG1302 Package Includes**:
542 542  
543 -(% class="box infomessage" %)
544 -(((
545 -**~ ifconfig eth0**
546 -)))
547 -
548 -[[image:1651745210205-512.png||height="130" width="621"]]
549 -
550 -
551 -(((
552 -(((
553 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
554 -)))
555 -)))
556 -
557 -
558 -
559 -==== **b). Register the gateway with the Basic Station Mode on the TTN-Stack** ====
560 -
561 -
562 -[[image:image-20230329164417-5.png]]
563 -
564 -
565 -
566 -==== **c). Download the gateway API keys, and then upload them to the gateway.** ====
567 -
568 -
569 -[[image:image-20230329164704-6.png]]
570 -
571 -
572 -==== **d). The status Shows disconnect.** ====
573 -
574 -
575 -[[image:image-20230329165619-7.png||height="568" width="948"]]
576 -
577 -
578 -==== **e.) Uploda API keys into the gateway** ====
579 -
580 -
581 -the User can find the Basic Station configuration directory in (% style="color:#0000ff" %)**/etc/station/**(%%) there is the station.conf files, and ttnstack directory.
582 -
583 -//**directory tree:**//
584 -
585 -///etc/station/
586 -├── station.conf 
587 -└── ttnstack  ~-~--> ** ttnstack configuration file directory**
588 - ├── cups.trust  ~-~-->  ttnstack auth file
589 - ├── cups.uri  ~-~-->  ttnstack server URI file
590 - └── station.conf  ~-~-~-~-> backup configuration file//
591 -
592 -
593 -
594 -**and then upload the downloaded keys to this directory((% style="color:#0000ff" %)/etc/station/(%%))**
595 -
596 -eg:
597 -
598 -/etc/station/
599 -├── cups.key  ~-~--> uploaded by you
600 -├── lns.key  ~-~--> uploaded by you
601 -├── station.conf
602 -
603 -
604 -==== **f). Configure gateway EUI and server address** ====
605 -
606 -
607 -[[image:image-20230329195650-10.png]]
608 -
609 -
610 -After the user enters the correct parameters, the server will be run automatically
611 -
612 -
613 -Tree Directory:
614 -
615 -/etc/station/
616 -├── cups.key
617 -├── cups.trust
618 -├── cups.uri
619 -├── lns.key
620 -├── start-configure.sh
621 -├── station.conf
622 -└── ttnstack
623 - ├── cups.trust
624 - ├── cups.uri
625 - └── station.conf
626 -
627 -
628 -==== **g). Check station running log** ====
629 -
630 -
631 -tail -f /var/log/station.log
632 -
633 -
634 -[[image:image-20230329201624-11.png]]
635 -
636 -
637 -= 6. Order Info =
638 -
639 -
640 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
641 -
642 -**~ (% style="color:#0000ff" %)XX:(%%)**
643 -
644 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
645 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
646 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
647 -
648 -
649 -
650 -= 7. Packing Info =
651 -
652 -
653 -(((
654 -**PG1302 Package Includes**:
655 -)))
656 -
657 -(((
658 658  * PG1302 x 1
659 659  * LoRa Antenna x 1
660 -)))
661 661  
481 +**~ PG1302-PI Package Includes**:
662 662  
663 -(((
664 -**PG1302-PI Package Includes**:
665 -)))
666 -
667 667  * PG1302 x 1
668 668  * LoRa Antenna x 1
669 669  * RPi3/4 converter PCB
670 670  * Screws to hole converter PCB on RPI.
671 671  
488 +=== 8. Reference ===
672 672  
673 -**PG1302-PI Dimension and weight: **
490 +* Datasheet, User Manual & Software Download:
674 674  
675 -* Device Size: 18 x 8 x 4 cm
676 -* Weight: 150g
492 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
677 677  
678 678  
495 +=== 9. Support ===
679 679  
680 -= 8. Support =
497 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
498 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
681 681  
682 -
683 -(((
684 -If you are experiencing issues and can't solve, you can send mail to
685 -)))
686 -
687 -(((
688 -[[support@dragino.com>>mailto:support@dragino.com]]
689 -)))
690 -
691 -(((
692 -With your question as detail as possible. We will reply and help you in the shortest.
693 -)))
500 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content
image-20230329164417-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20230329164704-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -16.6 KB
Content
image-20230329165619-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -106.9 KB
Content
image-20230329195416-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20230329195442-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -9.9 KB
Content
image-20230329195650-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20230329201624-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -20.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0