Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 111.2 >
edited by Xiaoling
on 2023/01/06 17:16
To version < 77.1 >
edited by Xiaoling
on 2022/05/06 14:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 - LoRaWAN Concentrator User Manual
1 +PG1302
Content
... ... @@ -1,40 +1,54 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents：**
8 8  
10 +
11 +
12 +**PG1302 LoRaWAN Concentrator User Manual**
13 +
14 +
15 +
16 +
17 +
9 9  {{toc/}}
10 10  
11 11  
21 +----
22 +
12 12  (% class="wikigeneratedid" id="H" %)
13 13  (((
14 14  
15 15  )))
16 16  
17 -= 1. Introduction =
28 +=== 1. Introduction ===
18 18  
19 -== 1.1 What is PG1302 LoRaWAN Concentrator? ==
30 +==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
20 20  
32 +(((
33 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 +)))
21 21  
22 22  (((
23 -The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
24 24  )))
25 25  
26 26  (((
27 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
41 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
28 28  )))
29 29  
30 30  (((
31 -PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
45 +(((
46 +
32 32  )))
48 +)))
33 33  
50 +==== 1.2 Features ====
34 34  
35 -== 1.2 Features ==
36 -
37 -
38 38  * Base on Semtech SX1302 solution
39 39  * Support Raspberry Pi 3B/3B+/4
40 40  * Up to -140dBm sensitivity
... ... @@ -42,46 +42,34 @@
42 42  * Mini-PCIe Interface
43 43  * Converter board to support Raspberry Pi
44 44  
59 +==== 1.3 General Interfaces ====
45 45  
46 -
47 -== 1.3 General Interfaces for PG1302 ==
48 -
49 -
50 50  * SPI interface for LoRa
51 51  * Power Input: 5v, 1A
52 52  * 1 x I-PEX for LoRa
53 -* Working Temperature: -40 ℃ ~~ 80℃
54 54  
65 +==== 1.4 Pin Mapping ====
55 55  
56 -
57 -== 1.4 Pin Mapping ==
58 -
59 -
60 60   [[image:1651743282627-547.png||height="402" width="425"]]
61 61  
62 62  
63 63  
64 -== 1.5 LEDs ==
71 +==== 1.5 LEDs ====
65 65  
73 + TX: Blink when transmit a packet
66 66  
67 -(((
68 -TX: Blink when transmit a packet
69 -RX: Blink when receive a packet
70 -Config: Always ON
71 -)))
75 + RX: Blink when receive a packet
72 72  
77 + Config: Always ON
73 73  
74 -== 1.6 Power Consumption ==
75 75  
80 +==== 1.6 Power Consumption ====
76 76  
77 -<300mA @ 3.3v.
82 + TBD
78 78  
79 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
80 80  
85 +==== 1.7 Applications ====
81 81  
82 -== 1.7 Applications ==
83 -
84 -
85 85  * Smart Buildings & Home Automation
86 86  * Logistics and Supply Chain Management
87 87  * Smart Metering
... ... @@ -89,477 +89,410 @@
89 89  * Smart Cities
90 90  * Smart Factory
91 91  
94 +=== 2. Example: Set up as LoRaWAN gateway. ===
92 92  
96 +==== 2.1 System structure ====
93 93  
94 -= 2. Example: Set up as LoRaWAN gateway =
98 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
95 95  
96 -== 2.1 System structure ==
100 + Set up method for other server are similar。
97 97  
98 -
99 -(((
100 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
101 -
102 -
103 -)))
104 -
102 +(% style="text-align:center" %)
105 105  [[image:1651743698677-436.png||height="457" width="686"]]
106 106  
107 107  
108 -== 2.2 Hardware Installation ==
109 109  
107 +==== 2.2 Hardware Installation ====
110 110  
111 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
109 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
112 112  
113 -[[image:image-20220621104746-1.png||height="381" width="451"]]
111 +(% style="text-align:center" %)
112 +[[image:1651743803032-803.png]]
114 114  
115 115  
116 -= 3. Install the software? =
117 117  
116 +=== 3. Install the software? ===
118 118  
119 -There are two ways to install the software in RPi4 to use PG1302.
118 + There are two ways to install software in RPi4 to use PG1302.
120 120  
121 -* Flash SD card with Dragino pre-build image which supports Web UI.
122 -* Install Lora packet forwarder in existing RPi OS.
120 +* Flash SD card with Dragino pre-build image which support Web UI.
121 +* Install lora packet forwarder in existing RPi OS.
123 123  
123 +=== 4. Flash with pre-build image ===
124 124  
125 +==== 4.1 Download the dragino image for RPI ====
125 125  
126 -= 4. Flash with pre-build image =
127 + Download PG1302_for_Rpi4_64_with_webui from
127 127  
128 -== 4.1 Download the dragino image for RPI ==
129 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
129 129  
130 130  
131 -(((
132 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
133 -)))
132 +==== 4.2 Flash the image to SD card ====
134 134  
134 + Flash the image to SD card:
135 135  
136 -== 4.2 Flash the image to an SD card ==
136 +(% style="text-align:center" %)
137 +[[image:1651744119133-233.png||height="373" width="621"]]
137 137  
139 + Note: Download the flash tool following this link
138 138  
139 -Flash the image to the SD card:
141 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
140 140  
141 -[[image:1651744119133-233.png||height="373" width="621"]]
142 142  
144 +==== 4.3 Access the Linux console ====
143 143  
144 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
146 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
145 145  
148 +Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
146 146  
147 -== 4.3 Access the Linux console ==
150 +(% style="text-align:center" %)
151 +[[image:1651744193675-591.png||height="450" width="466"]]
148 148  
149 149  
150 -(((
151 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
152 -)))
154 + The account details for Web Login are:
153 153  
156 +**~ User Name: root**
154 154  
155 -[[image:1651744193675-591.png||height="450" width="466"]]
158 +**~ Password:   dragino**
156 156  
157 -The account details for Web Login are:
158 158  
159 -(((
160 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
161 -)))
161 +**~ Backup account**
162 162  
163 -(((
164 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
165 -)))
163 +**~ Pi/dragino**
166 166  
167 -(((
168 -
169 -)))
170 170  
171 -(((
172 -**~ (% style="color:#0000ff" %)Backup account(%%)**
173 -)))
166 + After log in, you will be in the Linux console and type command here.
174 174  
175 -(((
176 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
168 +(% style="text-align:center" %)
169 +[[image:1651744358515-107.png||height="366" width="581"]]
177 177  
178 -
179 -)))
180 180  
181 -After logging in, you will be in the Linux console and type the command here.
172 +==== 4.4 Access the WebUI of RPi4. ====
182 182  
183 -[[image:1651744358515-107.png||height="366" width="581"]]
174 +===== 4.4.1 Home page =====
184 184  
176 + Open a browser on the PC and type the RPI ip address
185 185  
186 -== 4.4 Access the WebUI of RPi4 ==
178 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
187 187  
188 -=== 4.4.1 Home page ===
189 189  
181 + You will see the login interface of RPI as shown below.
190 190  
191 -(((
192 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
193 -You will see the login interface of RPI as shown below.
194 -The account details for Web Login are:
195 -)))
183 + The account details for Web Login are:
196 196  
197 -(((
198 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
199 -(% style="color:#0000ff" %)** Password:   dragino**
185 +**~ User Name: root**
200 200  
201 -
202 -)))
187 +**~ Password:   dragino**
203 203  
189 +(% style="text-align:center" %)
204 204  [[image:1651744457761-993.png||height="352" width="621"]]
205 205  
206 206  
207 -=== 4.4.2 LoRa Page ===
193 +===== 4.4.2 LoRa Page =====
208 208  
195 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
209 209  
210 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
197 +(% style="text-align:center" %)
198 +[[image:1651744554845-970.png||height="328" width="621"]]
211 211  
212 212  
213 -[[image:1651744554845-970.png||height="328" width="621"]]
201 + Different PG1302 hardware version can support different frequency range:
214 214  
203 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
215 215  
216 -Different PG1302 hardware version can support different frequency range:
205 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
217 217  
218 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
219 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
220 220  
221 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
208 + After user choose the frequency plan, he can see the actually frequency in used by checking the
222 222  
223 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
210 + page LogRead ~-~-> LoRa Log
224 224  
212 + Note *: See this instruction for how to customize frequency band
225 225  
226 -=== 4.4.3 LoRaWAN Page ===
214 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
227 227  
228 -==== 4.4.3.1 Semtech UDP ====
229 229  
217 +===== 4.4.3 LoRaWAN Page =====
230 230  
219 +====== 4.4.3.1 Semtech UDP ======
220 +
221 +
222 +(% style="text-align:center" %)
231 231  [[image:1651744767914-283.png||height="352" width="621"]]
232 232  
233 233  
234 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
235 235  
227 + Note *: See this instruction for how to configure TTN.
236 236  
237 -==== 4.4.3.2 Basic Station ====
229 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
238 238  
239 239  
232 +====== 4.4.3.2 Basic Station ======
233 +
234 +(% style="text-align:center" %)
240 240  [[image:1651744890629-683.png||height="380" width="621"]]
241 241  
242 242  
243 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
238 + Note *: See this instruction for how to configure TTN.
244 244  
240 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
245 245  
246 -=== 4.4.4 LogRead ===
247 247  
248 -==== 4.4.4.1 LoRa Log ====
243 +===== 4.4.4 LogRead =====
249 249  
245 +====== 4.4.4.1 LoRa Log ======
250 250  
247 +(% style="text-align:center" %)
251 251  [[image:1651744955955-452.png||height="571" width="621"]]
252 252  
253 253  
254 -Show the frequency for LoRa Radio and traffics.
251 + Show the frequency for LoRa Radio and traffics.
255 255  
256 256  
257 -==== 4.4.4.2 System Log ====
254 +====== 4.4.4.2 System Log ======
258 258  
256 + Show system log.
259 259  
260 -Show system log.
261 -
262 -
258 +(% style="text-align:center" %)
263 263  [[image:1651745003470-264.png||height="477" width="621"]]
264 264  
265 265  
266 -==== 4.4.4.3 Record Log ====
267 267  
263 +====== 4.4.4.3 Record Log ======
268 268  
269 -**Record the system log.**
265 +**~ Record the system log.**
270 270  
271 -
267 +(% style="text-align:center" %)
272 272  [[image:1651745069814-662.png||height="144" width="621"]]
273 273  
274 274  
275 -= 5. Install stand-alone LoRa Packet Forwarder =
271 +=== 5. Install stand alone LoRa Packet Forwarder. ===
276 276  
277 -== 5.1 OS requirement ==
273 +==== 5.1 OS requirement ====
278 278  
275 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
279 279  
280 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
281 -
282 -(% class="box" %)
283 -(((
284 284   pi@raspberrypi:~~$ cat /etc/os-release
278 +
285 285   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
280 +
286 286   NAME="Raspbian GNU/Linux"
282 +
287 287   VERSION_ID="8"
284 +
288 288   VERSION="8 (jessie)"
286 +
289 289   ID=raspbian
288 +
290 290   ID_LIKE=debian
290 +
291 291   HOME_URL="http:~/~/www.raspbian.org/"
292 +
292 292   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
294 +
293 293   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
294 294  
295 -
296 -)))
297 297  
298 +==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
298 298  
299 -== 5.2 Get Gateway ID in Raspberry and input this in TTN v3 ==
300 + In RPI, run below command to get a Gateway ID
300 300  
302 + ifconfig eth0
301 301  
302 -In RPI, run the below command to get a Gateway ID
303 -
304 -(% class="box infomessage" %)
305 -(((
306 -**~ ifconfig eth0**
307 -)))
308 -
304 +(% style="text-align:center" %)
309 309  [[image:1651745210205-512.png||height="130" width="621"]]
310 310  
311 311  
312 -(((
313 -(((
314 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
308 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
315 315  
316 -
317 -)))
318 -)))
310 + Make sure to select legacy packet forwarder.
319 319  
312 +(% style="text-align:center" %)
320 320  [[image:1651745267862-321.png||height="526" width="621"]]
321 321  
322 -[[image:1651745306744-481.png||height="478" width="621"]]
323 323  
324 324  
317 +(% style="text-align:center" %)
318 +[[image:1651745306744-481.png||height="478" width="621"]]
319 +
325 325  After set up, the status should show not connected as below:
326 326  
322 +(% style="text-align:center" %)
327 327  [[image:1651745366987-458.png||height="363" width="621"]]
328 328  
329 329  
330 -=== 5.2.1 Download and install LoRaWAN packet forwarder ===
326 +===== 5.2.1 Download and install LoRaWAN packet forwarder =====
331 331  
328 + Enable SPI and I2C first:
332 332  
333 -Enable SPI and I2C first:
330 + a)SPI needs to be enabled on the Raspberry Pi
334 334  
335 -a)  SPI needs to be enabled on the Raspberry Pi
332 + Run sudo raspi-config to open the config window
336 336  
337 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
334 +(% style="text-align:center" %)
335 +[[image:1651745476754-240.png||height="235" width="631"]]
338 338  
339 -[[image:1651745476754-240.png||height="234" width="629"]]
340 340  
341 -
338 +(% style="text-align:center" %)
342 342  [[image:image-20220505181135-1.png]]
343 343  
341 +(% style="text-align:center" %)
342 +[[image:image-20220505181135-2.png]]
344 344  
345 -[[image:image-20220505181135-2.png||height="229" width="622"]]
346 346  
347 347  
348 348  
349 -In RPI, Fist: Enter the root account:
347 + In RPI , Fist: Enter root account:
350 350  
351 -(((
352 -[[image:1651745583363-614.png||height="151" width="732"]]
349 +(% style="text-align:center" %)
350 +[[image:1651745583363-614.png]]
353 353  
354 -
355 -)))
356 356  
353 + and then run:
357 357  
358 -**Select the appropriate device version to download:**
355 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
359 359  
357 + chmod +x ./auto_install.sh
360 360  
361 -(((
362 -**draginofwd-32bit**
359 + ./auto_install.sh
363 363  
364 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
361 +(% style="text-align:center" %)
362 +[[image:1651745611629-818.png]]
365 365  
366 366  
367 -**dragino-64bit**
368 -)))
365 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
369 369  
370 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
367 + You can get these output:
371 371  
369 +(% style="text-align:center" %)
370 +[[image:1651745657252-173.png||height="426" width="621"]]
372 372  
373 -**dragino-tiker-32bit**
374 374  
375 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
373 +===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
376 376  
375 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
377 377  
378 -(((
379 -
377 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
380 380  
381 -[[image:image-20220928181226-1.png||height="218" width="1100"]]
379 +(% style="text-align:center" %)
380 +[[image:1651745709709-887.png||height="820" width="621"]]
382 382  
383 -
384 -)))
385 385  
386 -=== 5.2.2 Config Gateway ID, Frequency Band and Server address ===
383 + User can find the TTN v3 server address from:
387 387  
385 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
388 388  
389 -(((
390 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
391 -)))
392 392  
393 -(((
394 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
388 + And the default frequency band is US915 in **global_conf.json** file.
395 395  
396 -
397 -)))
398 -
399 -[[image:1651745709709-887.png||height="820" width="621"]]
400 -
401 -
402 -User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
403 -
404 -And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
405 -
390 +(% style="text-align:center" %)
406 406  [[image:1651745838008-820.png||height="650" width="621"]]
407 407  
408 408  
409 -* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
394 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
410 410  
411 -**~ 1). Chose your need the name of region frequency.**
396 + 1).Chose your need the name of region frequency.
412 412  
398 +(% style="text-align:center" %)
399 +[[image:1651745867516-322.png]]
413 413  
414 -[[image:1651745867516-322.png||height="83" width="740"]]
415 415  
402 + 2). Use this command to copy it.
416 416  
404 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
417 417  
418 -**~ 2). Use this command to copy it.**
406 +(% style="text-align:center" %)
407 +[[image:1651745984006-868.png]]
419 419  
420 -(% class="box infomessage" %)
421 -(((
422 -**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
423 -)))
424 424  
425 -[[image:1651745984006-868.png||height="87" width="745"]]
410 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
426 426  
427 -
428 -* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
429 -
430 -
431 -
432 -=== 5.2.3 Check result ===
433 -
434 -
412 +(% class="wikigeneratedid" %)
435 435  (((
436 -Run below command to restart the dragino_fwd:
414 +
437 437  )))
438 438  
439 -(((
440 -(% class="box infomessage" %)
441 -(((
442 -**sudo systemctl stop draginofwd**
443 -)))
417 +===== 5.2.3 Check result =====
444 444  
445 -(% class="box infomessage" %)
446 -(((
447 -**sudo systemctl start draginofwd**
448 -)))
449 -)))
419 + Run below command to restart the dragino_fwd:
450 450  
421 + sudo systemctl stop draginofwd
451 451  
452 -(((
453 -debug check the ruing status of fwd:
454 -)))
423 + sudo systemctl start draginofwd
455 455  
456 -(((
457 -(% class="box infomessage" %)
458 -(((
459 -**sudo systemctl status draginofwd**
460 -)))
461 -)))
425 + debug check the ruing status of fwd:
462 462  
463 -[[image:1651746045057-414.png||height="193" width="729"]]
427 + sudo systemctl status draginofwd
464 464  
429 +(% style="text-align:center" %)
430 +[[image:1651746045057-414.png]]
465 465  
466 466  
467 -The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
433 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
468 468  
469 -
435 +(% style="text-align:center" %)
470 470  [[image:1651746078253-168.png||height="372" width="621"]]
471 471  
472 472  
473 473  
474 -We can check dragino_fwd running states in RPi by running:
440 + We can check dragino_fwd running states in RPi by running:
475 475  
476 -(% class="box infomessage" %)
477 -(((
478 -**~ sudo journalctl -u draginofwd -f**
479 -)))
442 + //**sudo journalctl -u draginofwd -f**//
480 480  
481 -[[image:1651746111963-838.png||height="184" width="730"]]
444 +(% style="text-align:center" %)
445 +[[image:1651746111963-838.png]]
482 482  
483 483  
484 484  
485 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
449 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
486 486  
451 +(% style="text-align:center" %)
487 487  [[image:1651746139304-966.png||height="326" width="621"]]
488 488  
489 489  
490 -=== 5.2.4 Commands to handle service ===
491 491  
456 +===== 5.2.4 Commands to handle service =====
492 492  
493 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
494 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
495 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
496 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
497 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
458 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
459 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
460 +* **Start** dragino_fwd : sudo systemctl start draginofwd
461 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
462 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
498 498  
464 +=== 6. Order Info ===
499 499  
466 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
500 500  
501 -= 6. Order Info =
468 +**~ XX:**
502 502  
470 +* 868 (For Bands: EU868,IN865)
471 +* 915 (For Bands: US915,AU915,AS923,KR920)
472 +* 470 (For Band: CN470)
503 503  
504 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
474 +=== 7. Packing Info ===
505 505  
506 -**~ (% style="color:#0000ff" %)XX:(%%)**
476 +**~ PG1302 Package Includes**:
507 507  
508 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
509 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
510 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
511 -
512 -
513 -
514 -= 7. Packing Info =
515 -
516 -(((
517 -
518 -
519 -**PG1302 Package Includes**:
520 -)))
521 -
522 -(((
523 -(((
524 524  * PG1302 x 1
525 525  * LoRa Antenna x 1
526 -)))
527 -)))
528 528  
529 -(((
530 -
481 +**~ PG1302-PI Package Includes**:
531 531  
532 -**PG1302-PI Package Includes**:
533 -)))
534 -
535 535  * PG1302 x 1
536 536  * LoRa Antenna x 1
537 537  * RPi3/4 converter PCB
538 538  * Screws to hole converter PCB on RPI.
539 539  
540 -**PG1302-PI Dimension and weight: **
488 +=== 8. Reference ===
541 541  
542 -* Device Size: 18 x 8 x 4 cm
543 -* Weight: 150g
490 +* Datasheet, User Manual & Software Download:
544 544  
492 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
545 545  
546 546  
547 -(((
548 -= 8. Support =
495 +=== 9. Support ===
549 549  
497 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
498 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
550 550  
551 -(((
552 -If you are experiencing issues and can't solve, you can send mail to
553 -)))
554 -
555 -(((
556 -[[support@dragino.com>>mailto:support@dragino.com]]
557 -)))
558 -
559 -(((
560 -With your question as detail as possible. We will reply and help you in the shortest.
561 -
562 -
563 -
564 -)))
565 -)))
500 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0