Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 110.1 >
edited by Xiaoye
on 2022/09/28 18:13
To version < 79.1 >
edited by Xiaoling
on 2022/05/06 15:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 - LoRaWAN Concentrator User Manual
1 +PG1302
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -1,42 +1,54 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents：**
8 8  
10 +
11 +
12 +**PG1302 LoRaWAN Concentrator User Manual**
13 +
14 +
15 +
16 +
17 +
9 9  {{toc/}}
10 10  
11 11  
21 +----
22 +
12 12  (% class="wikigeneratedid" id="H" %)
13 13  (((
14 14  
15 15  )))
16 16  
17 -= **1. Introduction** =
28 +=== 1. Introduction ===
18 18  
30 +==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
19 19  
20 -== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
32 +(((
33 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 +)))
21 21  
22 -
23 23  (((
24 -The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
25 25  )))
26 26  
27 27  (((
28 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
41 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
29 29  )))
30 30  
31 31  (((
32 -PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
45 +(((
46 +
33 33  )))
48 +)))
34 34  
50 +==== 1.2 Features ====
35 35  
36 -
37 -== **1.2 Features** ==
38 -
39 -
40 40  * Base on Semtech SX1302 solution
41 41  * Support Raspberry Pi 3B/3B+/4
42 42  * Up to -140dBm sensitivity
... ... @@ -44,47 +44,34 @@
44 44  * Mini-PCIe Interface
45 45  * Converter board to support Raspberry Pi
46 46  
59 +==== 1.3 General Interfaces ====
47 47  
48 -
49 -== **1.3 General Interfaces for PG1302** ==
50 -
51 -
52 52  * SPI interface for LoRa
53 53  * Power Input: 5v, 1A
54 54  * 1 x I-PEX for LoRa
55 55  
65 +==== 1.4 Pin Mapping ====
56 56  
57 -
58 -== **1.4 Pin Mapping** ==
59 -
60 -
61 61   [[image:1651743282627-547.png||height="402" width="425"]]
62 62  
63 63  
64 64  
65 -== **1.5 LEDs** ==
71 +==== 1.5 LEDs ====
66 66  
73 + TX: Blink when transmit a packet
67 67  
68 -(((
69 -TX: Blink when transmit a packet
70 -RX: Blink when receive a packet
71 -Config: Always ON
72 -)))
75 + RX: Blink when receive a packet
73 73  
77 + Config: Always ON
74 74  
75 75  
76 -== **1.6 Power Consumption** ==
80 +==== 1.6 Power Consumption ====
77 77  
82 + TBD
78 78  
79 -<300mA @ 3.3v.
80 80  
81 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
85 +==== 1.7 Applications ====
82 82  
83 -
84 -
85 -== **1.7 Applications** ==
86 -
87 -
88 88  * Smart Buildings & Home Automation
89 89  * Logistics and Supply Chain Management
90 90  * Smart Metering
... ... @@ -92,498 +92,410 @@
92 92  * Smart Cities
93 93  * Smart Factory
94 94  
94 +=== 2. Example: Set up as LoRaWAN gateway. ===
95 95  
96 +==== 2.1 System structure ====
96 96  
97 -= **2. Example: Set up as LoRaWAN gateway** =
98 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
98 98  
100 + Set up method for other server are similar.
99 99  
100 -== **2.1 System structure** ==
101 -
102 -
103 -(((
104 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
105 -
106 -
107 -)))
108 -
102 +(% style="text-align:center" %)
109 109  [[image:1651743698677-436.png||height="457" width="686"]]
110 110  
111 111  
112 112  
113 -== **2.2 Hardware Installation** ==
107 +==== 2.2 Hardware Installation ====
114 114  
109 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
115 115  
116 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
111 +(% style="text-align:center" %)
112 +[[image:1651743803032-803.png]]
117 117  
118 -[[image:image-20220621104746-1.png||height="381" width="451"]]
119 119  
120 120  
116 +=== 3. Install the software? ===
121 121  
122 -= **3. Install the software?** =
118 + There are two ways to install software in RPi4 to use PG1302.
123 123  
120 +* Flash SD card with Dragino pre-build image which support Web UI.
121 +* Install lora packet forwarder in existing RPi OS.
124 124  
125 -There are two ways to install the software in RPi4 to use PG1302.
123 +=== 4. Flash with pre-build image ===
126 126  
127 -* Flash SD card with Dragino pre-build image which supports Web UI.
128 -* Install Lora packet forwarder in existing RPi OS.
125 +==== 4.1 Download the dragino image for RPI ====
129 129  
127 + Download PG1302_for_Rpi4_64_with_webui from
130 130  
129 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
131 131  
132 -= **4. Flash with pre-build image** =
133 133  
132 +==== 4.2 Flash the image to SD card ====
134 134  
135 -== **4.1 Download the dragino image for RPI** ==
134 + Flash the image to SD card:
136 136  
137 -
138 -(((
139 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
140 -)))
141 -
142 -
143 -
144 -== **4.2 Flash the image to an SD card** ==
145 -
146 -
147 -Flash the image to the SD card:
148 -
136 +(% style="text-align:center" %)
149 149  [[image:1651744119133-233.png||height="373" width="621"]]
150 150  
139 + Note: Download the flash tool following this link
151 151  
152 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
141 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
153 153  
154 154  
144 +==== 4.3 Access the Linux console ====
155 155  
156 -== **4.3 Access the Linux console** ==
146 +Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
157 157  
148 +Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
158 158  
159 -(((
160 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
161 -)))
162 -
163 -
150 +(% style="text-align:center" %)
164 164  [[image:1651744193675-591.png||height="450" width="466"]]
165 165  
166 -The account details for Web Login are:
167 167  
168 -(((
169 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
170 -)))
154 + The account details for Web Login are:
171 171  
172 -(((
173 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
174 -)))
156 +**~ User Name: root**
175 175  
176 -(((
177 -
178 -)))
158 +**~ Password:   dragino**
179 179  
180 -(((
181 -**~ (% style="color:#0000ff" %)Backup account(%%)**
182 -)))
183 183  
184 -(((
185 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
161 +**~ Backup account**
186 186  
187 -
188 -)))
163 +**~ Pi/dragino**
189 189  
190 -After logging in, you will be in the Linux console and type the command here.
191 191  
166 + After log in, you will be in the Linux console and type command here.
167 +
168 +(% style="text-align:center" %)
192 192  [[image:1651744358515-107.png||height="366" width="581"]]
193 193  
194 194  
172 +==== 4.4 Access the WebUI of RPi4. ====
195 195  
196 -== **4.4 Access the WebUI of RPi4** ==
174 +===== 4.4.1 Home page =====
197 197  
176 + Open a browser on the PC and type the RPI ip address
198 198  
199 -=== **4.4.1 Home page** ===
178 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
200 200  
201 201  
202 -(((
203 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
204 -You will see the login interface of RPI as shown below.
205 -The account details for Web Login are:
206 -)))
181 + You will see the login interface of RPI as shown below.
207 207  
208 -(((
209 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
210 -(% style="color:#0000ff" %)** Password:   dragino**
183 + The account details for Web Login are:
211 211  
212 -
213 -)))
185 +**~ User Name: root**
214 214  
187 +**~ Password:   dragino**
188 +
189 +(% style="text-align:center" %)
215 215  [[image:1651744457761-993.png||height="352" width="621"]]
216 216  
217 217  
193 +===== 4.4.2 LoRa Page =====
218 218  
219 -=== **4.4.2 LoRa Page** ===
195 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
220 220  
197 +(% style="text-align:center" %)
198 +[[image:1651744554845-970.png||height="328" width="621"]]
221 221  
222 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
223 223  
201 + Different PG1302 hardware version can support different frequency range:
224 224  
225 -[[image:1651744554845-970.png||height="328" width="621"]]
203 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
226 226  
205 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
227 227  
228 -Different PG1302 hardware version can support different frequency range:
229 229  
230 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
231 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
208 + After user choose the frequency plan, he can see the actually frequency in used by checking the
232 232  
233 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
210 + page LogRead ~-~-> LoRa Log
234 234  
235 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
212 + Note *: See this instruction for how to customize frequency band
236 236  
214 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
237 237  
238 238  
239 -=== **4.4.3 LoRaWAN Page** ===
217 +===== 4.4.3 LoRaWAN Page =====
240 240  
219 +====== 4.4.3.1 Semtech UDP ======
241 241  
242 -==== **4.4.3.1 Semtech UDP** ====
243 243  
244 -
222 +(% style="text-align:center" %)
245 245  [[image:1651744767914-283.png||height="352" width="621"]]
246 246  
247 247  
248 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
249 249  
227 + Note *: See this instruction for how to configure TTN.
250 250  
229 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
251 251  
252 -==== **4.4.3.2 Basic Station** ====
253 253  
232 +====== 4.4.3.2 Basic Station ======
254 254  
234 +(% style="text-align:center" %)
255 255  [[image:1651744890629-683.png||height="380" width="621"]]
256 256  
257 257  
258 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
238 + Note *: See this instruction for how to configure TTN.
259 259  
240 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
260 260  
261 261  
262 -=== **4.4.4 LogRead** ===
243 +===== 4.4.4 LogRead =====
263 263  
245 +====== 4.4.4.1 LoRa Log ======
264 264  
265 -==== **4.4.4.1 LoRa Log** ====
266 -
267 -
247 +(% style="text-align:center" %)
268 268  [[image:1651744955955-452.png||height="571" width="621"]]
269 269  
270 270  
271 -Show the frequency for LoRa Radio and traffics.
251 + Show the frequency for LoRa Radio and traffics.
272 272  
273 273  
254 +====== 4.4.4.2 System Log ======
274 274  
275 -==== **4.4.4.2 System Log** ====
256 + Show system log.
276 276  
277 -
278 -Show system log.
279 -
280 -
258 +(% style="text-align:center" %)
281 281  [[image:1651745003470-264.png||height="477" width="621"]]
282 282  
283 283  
284 284  
285 -==== **4.4.4.3 Record Log** ====
263 +====== 4.4.4.3 Record Log ======
286 286  
265 +**~ Record the system log.**
287 287  
288 -**Record the system log.**
289 -
290 -
267 +(% style="text-align:center" %)
291 291  [[image:1651745069814-662.png||height="144" width="621"]]
292 292  
293 293  
271 +=== 5. Install stand alone LoRa Packet Forwarder. ===
294 294  
295 -= **5. Install stand-alone LoRa Packet Forwarder** =
273 +==== 5.1 OS requirement ====
296 296  
275 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
297 297  
298 -== **5.1 OS requirement** ==
299 -
300 -
301 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
302 -
303 -(% class="box" %)
304 -(((
305 305   pi@raspberrypi:~~$ cat /etc/os-release
278 +
306 306   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
280 +
307 307   NAME="Raspbian GNU/Linux"
282 +
308 308   VERSION_ID="8"
284 +
309 309   VERSION="8 (jessie)"
286 +
310 310   ID=raspbian
288 +
311 311   ID_LIKE=debian
290 +
312 312   HOME_URL="http:~/~/www.raspbian.org/"
292 +
313 313   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
294 +
314 314   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
315 315  
316 -
317 -)))
318 318  
298 +==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
319 319  
300 + In RPI, run below command to get a Gateway ID
320 320  
321 -== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
302 + ifconfig eth0
322 322  
323 -
324 -In RPI, run the below command to get a Gateway ID
325 -
326 -(% class="box infomessage" %)
327 -(((
328 -**~ ifconfig eth0**
329 -)))
330 -
304 +(% style="text-align:center" %)
331 331  [[image:1651745210205-512.png||height="130" width="621"]]
332 332  
333 333  
334 -(((
335 -(((
336 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
308 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
337 337  
338 -
339 -)))
340 -)))
310 + Make sure to select legacy packet forwarder.
341 341  
312 +(% style="text-align:center" %)
342 342  [[image:1651745267862-321.png||height="526" width="621"]]
343 343  
344 -[[image:1651745306744-481.png||height="478" width="621"]]
345 345  
346 346  
317 +(% style="text-align:center" %)
318 +[[image:1651745306744-481.png||height="478" width="621"]]
319 +
347 347  After set up, the status should show not connected as below:
348 348  
322 +(% style="text-align:center" %)
349 349  [[image:1651745366987-458.png||height="363" width="621"]]
350 350  
351 351  
326 +===== 5.2.1 Download and install LoRaWAN packet forwarder =====
352 352  
353 -=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
328 + Enable SPI and I2C first:
354 354  
330 + a)SPI needs to be enabled on the Raspberry Pi
355 355  
356 -Enable SPI and I2C first:
332 + Run sudo raspi-config to open the config window
357 357  
358 -a)  SPI needs to be enabled on the Raspberry Pi
334 +(% style="text-align:center" %)
335 +[[image:1651745476754-240.png||height="235" width="631"]]
359 359  
360 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
361 361  
362 -[[image:1651745476754-240.png||height="234" width="629"]]
363 -
338 +(% style="text-align:center" %)
364 364  [[image:image-20220505181135-1.png]]
365 365  
366 -[[image:image-20220505181135-2.png||height="229" width="622"]]
341 +(% style="text-align:center" %)
342 +[[image:image-20220505181135-2.png]]
367 367  
368 368  
369 369  
370 -In RPI, Fist: Enter the root account:
371 371  
372 -(((
373 -[[image:1651745583363-614.png||height="151" width="732"]]
347 + In RPI , Fist: Enter root account:
374 374  
375 -
376 -)))
349 +(% style="text-align:center" %)
350 +[[image:1651745583363-614.png]]
377 377  
378 378  
379 -Select the appropriate device version to download
353 + and then run:
380 380  
355 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
381 381  
382 -(((
383 -draginofwd-32bit
357 + chmod +x ./auto_install.sh
384 384  
385 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-32bit.deb && dpkg -i draginofwd-32bit.deb
359 + ./auto_install.sh
386 386  
361 +(% style="text-align:center" %)
362 +[[image:1651745611629-818.png]]
387 387  
388 -dragino-64bit
389 -)))
390 390  
391 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-64bit.deb && dpkg -i draginofwd-64bit.deb
365 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
392 392  
367 + You can get these output:
393 393  
394 -dragino-tiker-32bit
369 +(% style="text-align:center" %)
370 +[[image:1651745657252-173.png||height="426" width="621"]]
395 395  
396 -wget https:~/~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/draginofwd-tinker-32bit.deb && dpkg -i draginofwd-tinker-32bit.deb
397 397  
373 +===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
398 398  
399 -(((
400 -
375 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
401 401  
402 -[[image:image-20220928181226-1.png]]
377 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
403 403  
404 -
405 -)))
379 +(% style="text-align:center" %)
380 +[[image:1651745709709-887.png||height="820" width="621"]]
406 406  
407 -=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
408 408  
383 + User can find the TTN v3 server address from:
409 409  
410 -(((
411 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
412 -)))
385 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
413 413  
414 -(((
415 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
416 416  
417 -
418 -)))
388 + And the default frequency band is US915 in **global_conf.json** file.
419 419  
420 -[[image:1651745709709-887.png||height="820" width="621"]]
421 -
422 -
423 -User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
424 -
425 -And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
426 -
390 +(% style="text-align:center" %)
427 427  [[image:1651745838008-820.png||height="650" width="621"]]
428 428  
429 429  
430 -* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
394 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
431 431  
432 -**~ 1). Chose your need the name of region frequency.**
396 + 1).Chose your need the name of region frequency.
433 433  
398 +(% style="text-align:center" %)
399 +[[image:1651745867516-322.png]]
434 434  
435 -[[image:1651745867516-322.png||height="83" width="740"]]
436 436  
402 + 2). Use this command to copy it.
437 437  
404 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
438 438  
439 -**~ 2). Use this command to copy it.**
406 +(% style="text-align:center" %)
407 +[[image:1651745984006-868.png]]
440 440  
441 -(% class="box infomessage" %)
442 -(((
443 -**cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
444 -)))
445 445  
446 -[[image:1651745984006-868.png||height="87" width="745"]]
410 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
447 447  
448 -
449 -* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
450 -
451 -
452 -
453 -=== **5.2.3 Check result** ===
454 -
455 -
412 +(% class="wikigeneratedid" %)
456 456  (((
457 -Run below command to restart the dragino_fwd:
414 +
458 458  )))
459 459  
460 -(((
461 -(% class="box infomessage" %)
462 -(((
463 -**sudo systemctl stop draginofwd**
464 -)))
417 +===== 5.2.3 Check result =====
465 465  
466 -(% class="box infomessage" %)
467 -(((
468 -**sudo systemctl start draginofwd**
469 -)))
470 -)))
419 + Run below command to restart the dragino_fwd:
471 471  
421 + sudo systemctl stop draginofwd
472 472  
473 -(((
474 -debug check the ruing status of fwd:
475 -)))
423 + sudo systemctl start draginofwd
476 476  
477 -(((
478 -(% class="box infomessage" %)
479 -(((
480 -**sudo systemctl status draginofwd**
481 -)))
482 -)))
425 + debug check the ruing status of fwd:
483 483  
484 -[[image:1651746045057-414.png||height="193" width="729"]]
427 + sudo systemctl status draginofwd
485 485  
429 +(% style="text-align:center" %)
430 +[[image:1651746045057-414.png]]
486 486  
487 487  
488 -The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
433 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
489 489  
490 -
435 +(% style="text-align:center" %)
491 491  [[image:1651746078253-168.png||height="372" width="621"]]
492 492  
493 493  
494 494  
495 -We can check dragino_fwd running states in RPi by running:
440 + We can check dragino_fwd running states in RPi by running:
496 496  
497 -(% class="box infomessage" %)
498 -(((
499 -**~ sudo journalctl -u draginofwd -f**
500 -)))
442 + //**sudo journalctl -u draginofwd -f**//
501 501  
502 -[[image:1651746111963-838.png||height="184" width="730"]]
444 +(% style="text-align:center" %)
445 +[[image:1651746111963-838.png]]
503 503  
504 504  
505 505  
506 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
449 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
507 507  
451 +(% style="text-align:center" %)
508 508  [[image:1651746139304-966.png||height="326" width="621"]]
509 509  
510 510  
511 511  
512 -=== **5.2.4 Commands to handle service** ===
456 +===== 5.2.4 Commands to handle service =====
513 513  
458 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
459 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
460 +* **Start** dragino_fwd : sudo systemctl start draginofwd
461 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
462 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
514 514  
515 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
516 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
517 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
518 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
519 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
464 +=== 6. Order Info ===
520 520  
466 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
521 521  
468 +**~ XX:**
522 522  
523 -= **6. Order Info** =
470 +* 868 (For Bands: EU868,IN865)
471 +* 915 (For Bands: US915,AU915,AS923,KR920)
472 +* 470 (For Band: CN470)
524 524  
474 +=== 7. Packing Info ===
525 525  
526 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
476 +**~ PG1302 Package Includes**:
527 527  
528 -**~ (% style="color:#0000ff" %)XX:(%%)**
529 -
530 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
531 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
532 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
533 -
534 -
535 -
536 -= **7. Packing Info** =
537 -
538 -(((
539 -
540 -
541 -**PG1302 Package Includes**:
542 -)))
543 -
544 -(((
545 -(((
546 546  * PG1302 x 1
547 547  * LoRa Antenna x 1
548 -)))
549 -)))
550 550  
551 -(((
552 -
481 +**~ PG1302-PI Package Includes**:
553 553  
554 -
555 -**PG1302-PI Package Includes**:
556 -)))
557 -
558 558  * PG1302 x 1
559 559  * LoRa Antenna x 1
560 560  * RPi3/4 converter PCB
561 561  * Screws to hole converter PCB on RPI.
562 562  
488 +=== 8. Reference ===
563 563  
564 -**PG1302-PI Dimension and weight: **
490 +* Datasheet, User Manual & Software Download:
565 565  
566 -* Device Size: 18 x 8 x 4 cm
567 -* Weight: 150g
492 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
568 568  
569 569  
495 +=== 9. Support ===
570 570  
571 -(((
572 -= **8. Support** =
497 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
498 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
573 573  
574 -
575 -(((
576 -If you are experiencing issues and can't solve, you can send mail to
577 -)))
578 -
579 -(((
580 -[[support@dragino.com>>mailto:support@dragino.com]]
581 -)))
582 -
583 -(((
584 -With your question as detail as possible. We will reply and help you in the shortest.
585 -
586 -
587 -
588 -)))
589 -)))
500 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content
image-20220928181226-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -29.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0