Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 108.6 >
edited by Xiaoling
on 2022/07/28 14:25
To version < 59.1 >
edited by Xiaoling
on 2022/05/06 10:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 - LoRaWAN Concentrator User Manual
1 +PG1302
Content
... ... @@ -1,82 +1,96 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents：**
9 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.gif]]
8 8  
9 -{{toc/}}
10 10  
11 11  
12 -(% class="wikigeneratedid" id="H" %)
13 -(((
14 -
15 -)))
13 +**PG1302 LoRaWAN Concentrator User Manual**
16 16  
17 -= **1. Introduction** =
15 +[[image:1651796979665-130.png]]
18 18  
19 -== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
17 +Document Version: 1.0.0
20 20  
19 +Image Version: v1.0
21 21  
22 -The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
23 23  
24 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
25 25  
26 -PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
27 27  
24 +{{toc numbered="true"/}}
28 28  
29 29  
30 -== **1.2 Features** ==
31 31  
32 -* Base on Semtech SX1302 solution
33 -* Support Raspberry Pi 3B/3B+/4
34 -* Up to -140dBm sensitivity
35 -* Support 3.3v and 5v.
36 -* Mini-PCIe Interface
37 -* Converter board to support Raspberry Pi
38 38  
29 +~1. Introduction
39 39  
31 + 1.1 What is PG1302 LoRaWAN Concentrator?
40 40  
33 +(((
34 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
35 +)))
41 41  
37 +(((
38 +
39 +)))
42 42  
43 -== **1.3 General Interfaces for PG1302** ==
41 +(((
42 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
43 +)))
44 44  
45 -* SPI interface for LoRa
46 -* Power Input: 5v, 1A
47 -* 1 x I-PEX for LoRa
45 +(((
46 +
47 +)))
48 48  
49 +(((
50 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
51 +)))
49 49  
53 +(((
54 +(((
55 +
56 +)))
57 +)))
50 50  
59 +1.2 Features
51 51  
61 +* Base on Semtech SX1302 solution
62 +* Support Raspberry Pi 3B/3B+/4
63 +* Up to -140dBm sensitivity
64 +* Support 3.3v and 5v.
65 +* Mini-PCIe Interface
66 +* Converter board to support Raspberry Pi
52 52  
53 -== **1.4 Pin Mapping** ==
68 +1.3 General Interfaces
54 54  
70 +* SPI interface for LoRa
71 +* Power Input: 5v, 1A
72 +* 1 x I-PEX for LoRa
55 55  
74 +1.4 Pin Mapping
75 +
56 56   [[image:1651743282627-547.png||height="402" width="425"]]
57 57  
78 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.gif]]
58 58  
80 +1.5 LEDs
59 59  
60 -== **1.5 LEDs** ==
82 + TX: Blink when transmit a packet
61 61  
84 + RX: Blink when receive a packet
62 62  
63 - TX: Blink when transmit a packet
64 - RX: Blink when receive a packet
65 - Config: Always ON
86 + Config: Always ON
66 66  
88 +1.6 Power Consumption
67 67  
90 + TBD
68 68  
69 -== **1.6 Power Consumption** ==
92 +1.7 Applications
70 70  
71 -
72 -<300mA @ 3.3v.
73 -
74 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
75 -
76 -
77 -
78 -== **1.7 Applications** ==
79 -
80 80  * Smart Buildings & Home Automation
81 81  * Logistics and Supply Chain Management
82 82  * Smart Metering
... ... @@ -84,470 +84,430 @@
84 84  * Smart Cities
85 85  * Smart Factory
86 86  
101 +2. Example: Set up as LoRaWAN gateway.
87 87  
103 + 2.1 System structure
88 88  
105 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.. Set up method for other  server are similar。
89 89  
90 -
91 -= **2. Example: Set up as LoRaWAN gateway.** =
92 -
93 -== **2.1 System structure** ==
94 -
95 -
96 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
97 -
107 +(% style="text-align:center" %)
98 98  [[image:1651743698677-436.png||height="457" width="686"]]
99 99  
100 100  
111 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.gif]]
101 101  
102 -== **2.2 Hardware Installation** ==
113 +2.2 Hardware Installation
103 103  
115 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
104 104  
105 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
117 +(% style="text-align:center" %)
118 +[[image:1651743803032-803.png]]
106 106  
107 -[[image:image-20220621104746-1.png||height="381" width="451"]]
120 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.gif]]
108 108  
122 +3. Install the software?
109 109  
124 + There are two ways to install software in RPi4 to use PG1302.
110 110  
111 -= **3. Install the software?** =
126 +* Flash SD card with Dragino pre-build image which support Web UI.
127 +* Install lora packet forwarder in existing RPi OS.
112 112  
113 -There are two ways to install the software in RPi4 to use PG1302.
129 +4. Flash with pre-build image
114 114  
115 -* Flash SD card with Dragino pre-build image which supports Web UI.
116 -* Install Lora packet forwarder in existing RPi OS.
131 + 4.1 Download the dragino image for RPI
117 117  
133 + Download PG1302_for_Rpi4_64_with_webui from
118 118  
135 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
119 119  
137 +4.2 Flash the image to SD card
120 120  
139 + Flash the image to SD card:
121 121  
122 -= **4. Flash with pre-build image** =
123 -
124 -== **4.1 Download the dragino image for RPI** ==
125 -
126 -
127 -(((
128 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
129 -)))
130 -
131 -
132 -
133 -== **4.2 Flash the image to an SD card** ==
134 -
135 -
136 -Flash the image to the SD card:
137 -
141 +(% style="text-align:center" %)
138 138  [[image:1651744119133-233.png||height="373" width="621"]]
139 139  
144 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]Note: Download the flash tool following this link
140 140  
141 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
146 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
142 142  
148 +4.3 Access the Linux console.
143 143  
150 + Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the  router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
144 144  
145 -== **4.3 Access the Linux console** ==
152 + Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
146 146  
147 -
148 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
149 -
154 +(% style="text-align:center" %)
150 150  [[image:1651744193675-591.png||height="450" width="466"]]
151 151  
152 -The account details for Web Login are:
157 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
153 153  
154 -(((
155 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
156 -)))
159 + The account details for Web Login are:
157 157  
158 -(((
159 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
160 -)))
161 +**~ User Name: root**
161 161  
162 -(((
163 -
164 -)))
163 +**~ Password:   dragino**
165 165  
166 -(((
167 -**~ (% style="color:#0000ff" %)Backup account(%%)**
168 -)))
169 169  
170 -(((
171 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
166 +**~ Backup account**
172 172  
173 -
174 -)))
168 +**~ Pi/dragino**
175 175  
176 -After logging in, you will be in the Linux console and type the command here.
177 177  
171 + After log in, you will be in the Linux console and type command here.
172 +
173 +(% style="text-align:center" %)
178 178  [[image:1651744358515-107.png||height="366" width="581"]]
179 179  
176 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]] 4.4 Access the WebUI of RPi4.
180 180  
178 + 4.4.1 Home page
181 181  
182 -== **4.4 Access the WebUI of RPi4.** ==
180 + Open a browser on the PC and type the RPI ip address
183 183  
184 -=== **4.4.1 Home page** ===
182 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
185 185  
186 186  
187 -Open a browser on the PC and type the RPI ip address [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by the uplink router)
188 -You will see the login interface of RPI as shown below.
189 -The account details for Web Login are:
185 + You will see the login interface of RPI as shown below.
190 190  
191 -(((
192 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
193 -(% style="color:#0000ff" %)** Password:   dragino**
187 + The account details for Web Login are:
194 194  
195 -
196 -)))
189 +**~ User Name: root**
197 197  
191 +**~ Password:   dragino**
192 +
193 +(% style="text-align:center" %)
198 198  [[image:1651744457761-993.png||height="352" width="621"]]
199 199  
196 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
200 200  
198 +4.4.2 LoRa Page
201 201  
202 -=== **4.4.2 LoRa Page** ===
200 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
203 203  
202 +(% style="text-align:center" %)
203 +[[image:1651744554845-970.png||height="328" width="621"]]
204 204  
205 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
205 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
206 206  
207 -[[image:1651744554845-970.png||height="328" width="621"]]
207 + Different PG1302 hardware version can support different frequency range:
208 208  
209 -Different PG1302 hardware version can support different frequency range:
209 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
210 210  
211 -➢** (% style="color:red" %)868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.(%%)**
211 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
212 212  
213 -➢ (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
214 214  
215 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:blue" %)**page LogRead ~-~-> LoRa Log**
214 + After user choose the frequency plan, he can see the actually frequency in used by checking the
216 216  
217 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
216 + page LogRead ~-~-> LoRa Log
218 218  
218 + Note *: See this instruction for how to customize frequency band
219 219  
220 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
220 220  
221 -=== **4.4.3 LoRaWAN Page** ===
222 222  
223 -==== **4.4.3.1 Semtech UDP** ====
223 +4.4.3 LoRaWAN Page
224 224  
225 + 4.4.3.1 Semtech UDP
225 225  
227 +
228 +(% style="text-align:center" %)
226 226  [[image:1651744767914-283.png||height="352" width="621"]]
227 227  
228 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
229 229  
232 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
230 230  
234 + Note *: See this instruction for how to configure TTN.
231 231  
232 -==== **4.4.3.2 Basic Station** ====
236 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN]]
233 233  
234 234  
239 +4.4.3.2 Basic Station
240 +
241 +(% style="text-align:center" %)
235 235  [[image:1651744890629-683.png||height="380" width="621"]]
236 236  
244 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
237 237  
238 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
246 + Note *: See this instruction for how to configure TTN.
239 239  
248 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
240 240  
241 241  
242 -=== **4.4.4 LogRead** ===
251 +4.4.4 LogRead
243 243  
244 -==== **4.4.4.1 LoRa Log** ====
253 + 4.4.4.1 LoRa Log
245 245  
246 -
255 +(% style="text-align:center" %)
247 247  [[image:1651744955955-452.png||height="571" width="621"]]
248 248  
249 -Show the frequency for LoRa Radio and traffics.
258 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
250 250  
260 + Show the frequency for LoRa Radio and traffics.
251 251  
252 252  
253 -==== **4.4.4.2 System Log** ====
263 +4.4.4.2 System Log
254 254  
265 + Show system log.
255 255  
256 -Show system log.
257 -
267 +(% style="text-align:center" %)
258 258  [[image:1651745003470-264.png||height="477" width="621"]]
259 259  
260 260  
271 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
261 261  
262 -==== **4.4.4.3 Record Log** ====
273 +4.4.4.3 Record Log
263 263  
264 264  
265 265  **Record the system log.**
266 266  
278 +(% style="text-align:center" %)
267 267  [[image:1651745069814-662.png||height="144" width="621"]]
268 268  
281 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
269 269  
283 +5. Install stand alone LoRa Packet Forwarder.
270 270  
271 -= **5. Install stand-alone LoRa Packet Forwarder.** =
285 + 5.1 OS requirement
272 272  
273 -== **5.1 OS requirement** ==
287 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
274 274  
289 + pi@raspberrypi:~~$ cat /etc/os-release
275 275  
276 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
277 -
278 -(% class="box" %)
279 -(((
280 - pi@raspberrypi:~~$ cat /etc/os-release
281 281   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
292 +
282 282   NAME="Raspbian GNU/Linux"
294 +
283 283   VERSION_ID="8"
296 +
284 284   VERSION="8 (jessie)"
298 +
285 285   ID=raspbian
300 +
286 286   ID_LIKE=debian
302 +
287 287   HOME_URL="http:~/~/www.raspbian.org/"
304 +
288 288   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
306 +
289 289   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
290 290  
291 -
292 -)))
293 293  
310 +5.2 Get Gateway ID in Raspberry and input this in TTN v3.
294 294  
312 + In RPI, run below command to get a Gateway ID
295 295  
296 -== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
314 + ifconfig eth0
297 297  
298 -
299 -In RPI, run the below command to get a Gateway ID
300 -
301 -(% class="box infomessage" %)
302 -(((
303 -**~ ifconfig eth0**
304 -)))
305 -
316 +(% style="text-align:center" %)
306 306  [[image:1651745210205-512.png||height="130" width="621"]]
307 307  
319 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.gif]]
308 308  
309 -(((
310 -(((
311 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
321 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3. Make sure to select legacy packet forwarder.
312 312  
313 -
314 -)))
315 -)))
316 -
323 +(% style="text-align:center" %)
317 317  [[image:1651745267862-321.png||height="526" width="621"]]
318 318  
319 -[[image:1651745306744-481.png||height="478" width="621"]]
326 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.jpg]]
320 320  
328 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.jpg]]
321 321  
322 -After set up, the status should show not connected as below:
330 +(% style="text-align:center" %)
331 +[[image:1651745306744-481.png||height="478" width="621"]]
323 323  
333 +(% style="text-align:center" %)
324 324  [[image:1651745366987-458.png||height="363" width="621"]]
325 325  
336 +After set up, the status should show not connected as below:
326 326  
338 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.jpg]]
327 327  
328 -=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
340 +5.2.1 Download and install LoRaWAN packet forwarder
329 329  
330 330  
331 -Enable SPI and I2C first:
343 + Enable SPI and I2C first:
332 332  
333 -a)  SPI needs to be enabled on the Raspberry Pi
345 + a)SPI needs to be enabled on the Raspberry Pi
334 334  
335 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
347 + Run sudo raspi-config to open the config window
336 336  
337 -[[image:1651745476754-240.png||height="234" width="629"]]
349 +(% style="text-align:center" %)
350 +[[image:1651745476754-240.png||height="235" width="631"]]
338 338  
352 +
353 +(% style="text-align:center" %)
339 339  [[image:image-20220505181135-1.png]]
340 340  
341 -[[image:image-20220505181135-2.png||height="229" width="622"]]
356 +(% style="text-align:center" %)
357 +[[image:image-20220505181135-2.png]]
342 342  
359 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.jpg]]
343 343  
361 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.jpg]]
344 344  
345 -In RPI, Fist: Enter the root account:
346 346  
347 -(((
348 -[[image:1651745583363-614.png||height="151" width="732"]]
349 349  
350 -
351 -)))
352 352  
353 -and then run:
354 354  
355 -(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
367 + In RPI , Fist: Enter root account:
356 356  
357 -(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
369 +(% style="text-align:center" %)
370 +[[image:1651745583363-614.png]]
358 358  
359 -(% style="background-color:#dcdcdc" %)./auto_install.sh
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.jpg]]
360 360  
361 -(((
362 -[[image:1651745611629-818.png||height="225" width="729"]]
363 -)))
374 + and then run:
364 364  
365 -This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
376 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
366 366  
367 -You can get these output:
378 + chmod +x ./auto_install.sh
368 368  
369 -(((
370 -[[image:1651745657252-173.png||height="426" width="621"]]
380 + ./auto_install.sh
371 371  
382 +(% style="text-align:center" %)
383 +[[image:1651745611629-818.png]]
372 372  
373 -
374 -)))
385 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.gif]]
375 375  
376 -=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
387 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
377 377  
389 + You can get these output:
378 378  
379 -(((
380 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
381 -)))
391 +(% style="text-align:center" %)
392 +[[image:1651745657252-173.png||height="426" width="621"]]
382 382  
383 -(((
384 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
394 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.jpg]]
385 385  
386 -
387 -)))
396 +5.5.2 Config Gateway ID, Frequency Band and Server address
388 388  
389 -[[image:1651745709709-887.png||height="820" width="621"]]
398 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
390 390  
400 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
391 391  
392 -User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
402 +(% style="text-align:center" %)
403 +[[image:1651745709709-887.png||height="820" width="621"]]
393 393  
394 -And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
405 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.jpg]]
395 395  
396 -[[image:1651745838008-820.png||height="650" width="621"]]
407 + User can find the TTN v3 server address from:
397 397  
409 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
398 398  
399 -* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
400 400  
401 -**~ 1). Chose your need the name of region frequency.**
412 + And the default frequency band is US915 in **global_conf.json** file.
402 402  
403 -[[image:1651745867516-322.png||height="83" width="740"]]
414 +(% style="text-align:center" %)
415 +[[image:1651745838008-820.png||height="650" width="621"]]
404 404  
417 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.jpg]]
405 405  
406 -*
407 -** 2). Use this command to copy it.
419 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
408 408  
409 - cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
421 + 1).Chose your need the name of region frequency.
410 410  
411 -[[image:1651745984006-868.png||height="87" width="745"]]
423 +(% style="text-align:center" %)
424 +[[image:1651745867516-322.png]]
412 412  
413 -* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
414 414  
427 + 2). Use this command to copy it.
415 415  
429 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
416 416  
417 -=== **5.2.3 Check result** ===
431 +(% style="text-align:center" %)
432 +[[image:1651745984006-868.png]]
418 418  
434 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.jpg]]
419 419  
420 -(((
421 -Run below command to restart the dragino_fwd:
422 -)))
436 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
423 423  
424 -(((
425 -(% class="box infomessage" %)
426 -(((
427 -**sudo systemctl stop draginofwd**
428 -)))
438 +5.2.3 Check result
429 429  
430 -(% class="box infomessage" %)
431 -(((
432 -**sudo systemctl start draginofwd**
433 -)))
434 -)))
440 + Run below command to restart the dragino_fwd:
435 435  
442 + sudo systemctl stop draginofwd
436 436  
437 -(((
438 -debug check the ruing status of fwd:
439 -)))
444 + sudo systemctl start draginofwd
440 440  
441 -(((
442 -(% class="box infomessage" %)
443 -(((
444 -**sudo systemctl status draginofwd**
445 -)))
446 -)))
446 + debug check the ruing status of fwd:
447 447  
448 -[[image:1651746045057-414.png||height="193" width="729"]]
448 + sudo systemctl status draginofwd
449 449  
450 +(% style="text-align:center" %)
451 +[[image:1651746045057-414.png]]
450 450  
453 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.jpg]]
451 451  
452 -The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
455 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
453 453  
454 -
457 +(% style="text-align:center" %)
455 455  [[image:1651746078253-168.png||height="372" width="621"]]
456 456  
460 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.jpg]]
457 457  
458 458  
459 -We can check dragino_fwd running states in RPi by running:
463 + We can check dragino_fwd running states in RPi by running:
460 460  
461 -(% class="box infomessage" %)
462 -(((
463 -**~ sudo journalctl -u draginofwd -f**
464 -)))
465 + sudo journalctl -u draginofwd -f
465 465  
466 -[[image:1651746111963-838.png||height="184" width="730"]]
467 +(% style="text-align:center" %)
468 +[[image:1651746111963-838.png]]
467 467  
470 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.gif]]
468 468  
469 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
470 470  
473 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
474 +
475 +(% style="text-align:center" %)
471 471  [[image:1651746139304-966.png||height="326" width="621"]]
472 472  
478 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
473 473  
480 +5.2.4 Commands to handle service
474 474  
475 -=== **5.2.4 Commands to handle service** ===
482 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
483 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
484 +* **Start** dragino_fwd : sudo systemctl start draginofwd
485 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
486 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
476 476  
488 +6. Order Info
477 477  
478 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
479 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
480 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
481 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
482 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
490 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
483 483  
492 +**~ XX:**
484 484  
494 +* 868 (For Bands: EU868,IN865)
495 +* 915 (For Bands: US915,AU915,AS923,KR920)
496 +* 470 (For Band: CN470)
485 485  
498 +7. Packing Info
486 486  
487 -= **6. Order Info** =
500 +**~ PG1302 Package Includes**:
488 488  
489 -
490 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
491 -
492 -**~ (% style="color:#0000ff" %)XX:(%%)**
493 -
494 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
495 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
496 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
497 -
498 -
499 -
500 -
501 -
502 -= **7. Packing Info** =
503 -
504 -(((
505 -
506 -
507 -**PG1302 Package Includes**:
508 -)))
509 -
510 -(((
511 -(((
512 512  * PG1302 x 1
513 513  * LoRa Antenna x 1
514 -)))
515 -)))
516 516  
517 -(((
518 -
505 +**~ PG1302-PI Package Includes**:
519 519  
520 -
521 -**PG1302-PI Package Includes**:
522 -)))
523 -
524 524  * PG1302 x 1
525 525  * LoRa Antenna x 1
526 526  * RPi3/4 converter PCB
527 527  * Screws to hole converter PCB on RPI.
528 528  
529 -**PG1302-PI Dimension and weight: **
512 +8. Reference
530 530  
531 -* Device Size: 18 x 8 x 4 cm
532 -* Weight: 150g
514 +* Datasheet, User Manual & Software Download:
533 533  
516 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
534 534  
535 535  
519 +9. Support
536 536  
521 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
522 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
537 537  
538 -(((
539 -= **8. Support** =
524 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
540 540  
541 541  
542 -(((
543 -If you are experiencing issues and can't solve, you can send mail to
544 -)))
545 -
546 -(((
547 -[[support@dragino.com>>mailto:support@dragino.com]]
548 -)))
549 -
550 -(((
551 -With your question as detail as possible. We will reply and help you in the shortest.
552 -)))
553 -)))
527 +
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0