Last modified by Kilight Cao on 2024/06/22 10:43
<
From version < 108.17 >
edited by Xiaoling
on 2022/08/10 11:49
To version < 82.1 >
edited by Xiaoling
on 2022/05/06 15:35
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PG1302 - LoRaWAN Concentrator User Manual
1 +PG1302
Content
... ... @@ -1,41 +1,54 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20220616085956-1.jpeg||height="609" width="609"]]
4 +[[image:Main.User Manual for All Gateway models.WebHome@pg1302.jpg]]
3 3  
4 4  
5 5  
6 6  
7 -**Table of Contents：**
8 8  
10 +
11 +
12 +**PG1302 LoRaWAN Concentrator User Manual**
13 +
14 +
15 +
16 +
17 +
9 9  {{toc/}}
10 10  
11 11  
21 +----
22 +
12 12  (% class="wikigeneratedid" id="H" %)
13 13  (((
14 14  
15 15  )))
16 16  
17 -= **1. Introduction** =
28 +=== 1. Introduction ===
18 18  
19 -== **1.1 What is PG1302 LoRaWAN Concentrator?** ==
30 +==== 1.1 What is PG1302 LoRaWAN Concentrator? ====
20 20  
32 +(((
33 +The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random  channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
34 +)))
21 21  
22 22  (((
23 -The PG1302 is a (% style="color:green" %)**multi-channel high-performance transmitter/receiver**(%%) designed to simultaneously receive several LoRa packets using random spreading factors on random channels. Its goal is to enable robust connection between a central wireless data concentrator and a massive amount of wireless end-points spread over a very wide range of distances.
37 +The PG1302 is design to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in moderately interfered environment.
24 24  )))
25 25  
26 26  (((
27 -The PG1302 is designed to use with Raspberry Pi to build smart metering fixed networks and Internet of Things applications with up to 5000 nodes per km2 in a moderately interfered environment.
41 +PG1302 is fully compatible with RPi3/4, users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw lorawan driver in the exist OS.
28 28  )))
29 29  
30 30  (((
31 -PG1302 is fully compatible with (% style="color:green" %)**RPi3/4 or Tinker Board**(%%), users can use the pre-build OS from Dragino to set up and easy to use the module by Web UI. Or install the raw LoRaWAN driver in the existing OS.
45 +(((
46 +
32 32  )))
48 +)))
33 33  
50 +==== 1.2 Features ====
34 34  
35 -
36 -== **1.2 Features** ==
37 -
38 -
39 39  * Base on Semtech SX1302 solution
40 40  * Support Raspberry Pi 3B/3B+/4
41 41  * Up to -140dBm sensitivity
... ... @@ -43,47 +43,34 @@
43 43  * Mini-PCIe Interface
44 44  * Converter board to support Raspberry Pi
45 45  
59 +==== 1.3 General Interfaces ====
46 46  
47 -
48 -== **1.3 General Interfaces for PG1302** ==
49 -
50 -
51 51  * SPI interface for LoRa
52 52  * Power Input: 5v, 1A
53 53  * 1 x I-PEX for LoRa
54 54  
65 +==== 1.4 Pin Mapping ====
55 55  
56 -
57 -== **1.4 Pin Mapping** ==
58 -
59 -
60 60   [[image:1651743282627-547.png||height="402" width="425"]]
61 61  
62 62  
63 63  
64 -== **1.5 LEDs** ==
71 +==== 1.5 LEDs ====
65 65  
73 + TX: Blink when transmit a packet
66 66  
67 -(((
68 -TX: Blink when transmit a packet
69 -RX: Blink when receive a packet
70 -Config: Always ON
71 -)))
75 + RX: Blink when receive a packet
72 72  
77 + Config: Always ON
73 73  
74 74  
75 -== **1.6 Power Consumption** ==
80 +==== 1.6 Power Consumption ====
76 76  
82 + TBD
77 77  
78 -<300mA @ 3.3v.
79 79  
80 -Detail Test Report see [[this link>>https://www.dropbox.com/sh/89virm4y0b02c7i/AAA-cgQEsSc8gNGFYAB0qZ_Za?dl=0]]
85 +==== 1.7 Applications ====
81 81  
82 -
83 -
84 -== **1.7 Applications** ==
85 -
86 -
87 87  * Smart Buildings & Home Automation
88 88  * Logistics and Supply Chain Management
89 89  * Smart Metering
... ... @@ -91,472 +91,414 @@
91 91  * Smart Cities
92 92  * Smart Factory
93 93  
94 +=== 2. Example: Set up as LoRaWAN gateway. ===
94 94  
96 +==== 2.1 System structure ====
95 95  
96 -= **2. Example: Set up as LoRaWAN gateway.** =
98 + This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server.
97 97  
98 -== **2.1 System structure** ==
100 + Set up method for other server are similar.
99 99  
100 -
101 -(((
102 -This example is an example to show how to set up the PG1302 + RPi as a LoRaWAN gateway to use with [[TheThingsNetwork>>url:http://www.thethingsnetwork.org/]](TTN) LoRaWAN server. Set up method for other server are similar.
103 -)))
104 -
102 +(% style="text-align:center" %)
105 105  [[image:1651743698677-436.png||height="457" width="686"]]
106 106  
107 107  
108 108  
109 -== **2.2 Hardware Installation** ==
107 +==== 2.2 Hardware Installation ====
110 110  
109 +**~ Important Notice: **Please power the RPI with 5V,3A cable.
111 111  
112 -(% style="color:red" %)**Important Notice: Please power the RPI with 5V,3A cable.**
111 +(% style="text-align:center" %)
112 +[[image:1651743803032-803.png]]
113 113  
114 -[[image:image-20220621104746-1.png||height="381" width="451"]]
115 115  
116 116  
116 +=== 3. Install the software? ===
117 117  
118 -= **3. Install the software?** =
118 + There are two ways to install software in RPi4 to use PG1302.
119 119  
120 +* Flash SD card with Dragino pre-build image which support Web UI.
121 +* Install lora packet forwarder in existing RPi OS.
120 120  
121 -There are two ways to install the software in RPi4 to use PG1302.
123 +=== 4. Flash with pre-build image ===
122 122  
123 -* Flash SD card with Dragino pre-build image which supports Web UI.
124 -* Install Lora packet forwarder in existing RPi OS.
125 +==== 4.1 Download the dragino image for RPI ====
125 125  
127 + Download PG1302_for_Rpi4_64_with_webui from
126 126  
129 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
127 127  
128 -= **4. Flash with pre-build image** =
129 129  
130 -== **4.1 Download the dragino image for RPI** ==
132 +==== 4.2 Flash the image to SD card ====
131 131  
134 + Flash the image to SD card:
132 132  
133 -(((
134 -Download PG1302_for_Rpi4_64_with_webui from: [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
135 -)))
136 -
137 -
138 -
139 -== **4.2 Flash the image to an SD card** ==
140 -
141 -
142 -Flash the image to the SD card:
143 -
136 +(% style="text-align:center" %)
144 144  [[image:1651744119133-233.png||height="373" width="621"]]
145 145  
139 + Note: Download the flash tool following this link
146 146  
147 -(% style="color:red" %)**Note: Download the flash tool following this link：**[[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
141 + [[https:~~/~~/www.balena.io/etcher/>>https://www.balena.io/etcher/]]
148 148  
149 149  
144 +==== 4.3 Access the Linux console ====
150 150  
151 -== **4.3 Access the Linux console** ==
146 +(((
147 + Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router’s management portal, you should be
148 +)))
152 152  
150 +(((
151 + able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI.
152 +)))
153 153  
154 154  (((
155 -Connect the RPI Ethernet port to your router, RPi will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the RPI. You can use this IP to connect the WEB UI or SSH access of RPI. Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
155 + Make sure your PC and the RPI is in the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]]) to access it. Below are screenshots
156 156  )))
157 157  
158 158  
159 +(% style="text-align:center" %)
159 159  [[image:1651744193675-591.png||height="450" width="466"]]
160 160  
161 -The account details for Web Login are:
162 162  
163 -(((
164 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
165 -)))
163 + The account details for Web Login are:
166 166  
167 -(((
168 -**~ (% style="color:#0000ff" %)Password:   dragino(%%)**
169 -)))
165 +**~ User Name: root**
170 170  
171 -(((
172 -
173 -)))
167 +**~ Password:   dragino**
174 174  
175 -(((
176 -**~ (% style="color:#0000ff" %)Backup account(%%)**
177 -)))
178 178  
179 -(((
180 -**~ (% style="color:#0000ff" %)Pi/dragino(%%)**
170 +**~ Backup account**
181 181  
182 -
183 -)))
172 +**~ Pi/dragino**
184 184  
185 -After logging in, you will be in the Linux console and type the command here.
186 186  
175 + After log in, you will be in the Linux console and type command here.
176 +
177 +(% style="text-align:center" %)
187 187  [[image:1651744358515-107.png||height="366" width="581"]]
188 188  
189 189  
181 +==== 4.4 Access the WebUI of RPi4. ====
190 190  
191 -== **4.4 Access the WebUI of RPi4.** ==
183 +===== 4.4.1 Home page =====
192 192  
193 -=== **4.4.1 Home page** ===
185 + Open a browser on the PC and type the RPI ip address
194 194  
187 + [[http:~~/~~/IP_ADDRESS** **>>url:http://192.168.1.xx/]] (If the IP is assigned by uplink router)
195 195  
196 -(((
197 -Open a browser on the PC and type the RPI ip address **http:~/~/IP_ADDRESS ** (If the IP is assigned by the uplink router)
198 -You will see the login interface of RPI as shown below.
199 -The account details for Web Login are:
200 -)))
189 + You will see the login interface of RPI as shown below.
201 201  
202 -(((
203 -**~ (% style="color:#0000ff" %)User Name: root(%%)**
204 -(% style="color:#0000ff" %)** Password:   dragino**
191 + The account details for Web Login are:
205 205  
206 -
207 -)))
193 +**~ User Name: root**
208 208  
195 +**~ Password:   dragino**
196 +
197 +(% style="text-align:center" %)
209 209  [[image:1651744457761-993.png||height="352" width="621"]]
210 210  
211 211  
201 +===== 4.4.2 LoRa Page =====
212 212  
213 -=== **4.4.2 LoRa Page** ===
203 + This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
214 214  
205 +(% style="text-align:center" %)
206 +[[image:1651744554845-970.png||height="328" width="621"]]
215 215  
216 -This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customize the band* as well.
217 217  
218 -[[image:1651744554845-970.png||height="328" width="621"]]
209 + Different PG1302 hardware version can support different frequency range:
219 219  
220 -Different PG1302 hardware version can support different frequency range:
211 + ➢ 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
221 221  
222 -* (% style="color:red" %)**868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.**
223 -* (% style="color:red" %)**915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920**
213 + ➢ 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
224 224  
225 225  
216 + After user choose the frequency plan, he can see the actually frequency in used by checking the
226 226  
227 -After user choose the frequency plan, he can see the actually frequency in used by checking the (% style="color:#037691" %)**page LogRead ~-~-> LoRa Log**
218 + page LogRead ~-~-> LoRa Log
228 228  
229 -(% style="color:red" %)**Note *: [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
220 + Note *: See this instruction for how to customize frequency band
230 230  
222 + [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
231 231  
232 232  
233 -=== **4.4.3 LoRaWAN Page** ===
225 +===== 4.4.3 LoRaWAN Page =====
234 234  
235 -==== **4.4.3.1 Semtech UDP** ====
227 +====== 4.4.3.1 Semtech UDP ======
236 236  
237 237  
230 +(% style="text-align:center" %)
238 238  [[image:1651744767914-283.png||height="352" width="621"]]
239 239  
233 + Note *: See this instruction for how to configure TTN.
240 240  
241 -(% style="color:red" %)**Note *: [[See this instruction for how to configure TTN>>doc:Main.Notes for TTN.WebHome]].**
235 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_TTN>>url:https://wiki.dragino.com/index.php?title=Notes_for_TTN||style="background-color: rgb(255, 255, 255);"]]
242 242  
243 243  
238 +====== 4.4.3.2 Basic Station ======
244 244  
245 -==== **4.4.3.2 Basic Station** ====
246 -
247 -
240 +(% style="text-align:center" %)
248 248  [[image:1651744890629-683.png||height="380" width="621"]]
249 249  
243 + Note *: See this instruction for how to configure TTN.
250 250  
251 -(% style="color:red" %)**Note *: [[See this instruction for how to configure AWS-loT-Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
245 + [[https:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:https://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
252 252  
253 253  
248 +===== 4.4.4 LogRead =====
254 254  
255 -=== **4.4.4 LogRead** ===
250 +====== 4.4.4.1 LoRa Log ======
256 256  
257 -==== **4.4.4.1 LoRa Log** ====
258 -
259 -
252 +(% style="text-align:center" %)
260 260  [[image:1651744955955-452.png||height="571" width="621"]]
261 261  
262 -Show the frequency for LoRa Radio and traffics.
255 + Show the frequency for LoRa Radio and traffics.
263 263  
264 264  
258 +====== 4.4.4.2 System Log ======
265 265  
266 -==== **4.4.4.2 System Log** ====
260 + Show system log.
267 267  
268 -
269 -Show system log.
270 -
262 +(% style="text-align:center" %)
271 271  [[image:1651745003470-264.png||height="477" width="621"]]
272 272  
273 273  
274 274  
275 -==== **4.4.4.3 Record Log** ====
267 +====== 4.4.4.3 Record Log ======
276 276  
269 +**~ Record the system log.**
277 277  
278 -**Record the system log.**
279 -
271 +(% style="text-align:center" %)
280 280  [[image:1651745069814-662.png||height="144" width="621"]]
281 281  
282 282  
275 +=== 5. Install stand alone LoRa Packet Forwarder. ===
283 283  
284 -= **5. Install stand-alone LoRa Packet Forwarder.** =
277 +==== 5.1 OS requirement ====
285 285  
286 -== **5.1 OS requirement** ==
279 + RPI in this example is RPI model 4B with fresh Raspbian OS install.
287 287  
288 -
289 -RPI in this example is RPI model 4B with fresh Raspbian OS install.
290 -
291 -(% class="box" %)
292 -(((
293 293   pi@raspberrypi:~~$ cat /etc/os-release
282 +
294 294   PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
284 +
295 295   NAME="Raspbian GNU/Linux"
286 +
296 296   VERSION_ID="8"
288 +
297 297   VERSION="8 (jessie)"
290 +
298 298   ID=raspbian
292 +
299 299   ID_LIKE=debian
294 +
300 300   HOME_URL="http:~/~/www.raspbian.org/"
296 +
301 301   SUPPORT_URL="http:~/~/www.raspbian.org/RaspbianForums"
298 +
302 302   BUG_REPORT_URL="http:~/~/www.raspbian.org/RaspbianBugs"
303 303  
304 -
305 -)))
306 306  
302 +==== 5.2 Get Gateway ID in Raspberry and input this in TTN v3. ====
307 307  
304 + In RPI, run below command to get a Gateway ID
308 308  
309 -== **5.2 Get Gateway ID in Raspberry and input this in TTN v3** ==
306 + (% class="mark" %)ifconfig eth0
310 310  
311 -
312 -In RPI, run the below command to get a Gateway ID
313 -
314 -(% class="box infomessage" %)
315 -(((
316 -**~ ifconfig eth0**
317 -)))
318 -
308 +(% style="text-align:center" %)
319 319  [[image:1651745210205-512.png||height="130" width="621"]]
320 320  
321 321  
322 -(((
323 -(((
324 -We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff.  Input this to TTN v3. Make sure to select legacy packet forwarder.
312 + We got the ether (eth0 MAC) address is b8:27:eb:49:62:bc). Add ffff at the end and remove “:” to get the gateway ID: b827ebxxxxbcffff. Input this to TTN v3.
325 325  
326 -
327 -)))
328 -)))
314 + Make sure to select legacy packet forwarder.
329 329  
316 +(% style="text-align:center" %)
330 330  [[image:1651745267862-321.png||height="526" width="621"]]
331 331  
332 -[[image:1651745306744-481.png||height="478" width="621"]]
333 333  
334 334  
321 +(% style="text-align:center" %)
322 +[[image:1651745306744-481.png||height="478" width="621"]]
323 +
335 335  After set up, the status should show not connected as below:
336 336  
326 +(% style="text-align:center" %)
337 337  [[image:1651745366987-458.png||height="363" width="621"]]
338 338  
339 339  
330 +===== 5.2.1 Download and install LoRaWAN packet forwarder =====
340 340  
341 -=== **5.2.1 Download and install LoRaWAN packet forwarder** ===
332 + Enable SPI and I2C first:
342 342  
334 + a)SPI needs to be enabled on the Raspberry Pi
343 343  
344 -Enable SPI and I2C first:
336 + Run sudo raspi-config to open the config window
345 345  
346 -a)  SPI needs to be enabled on the Raspberry Pi
338 +(% style="text-align:center" %)
339 +[[image:1651745476754-240.png||height="235" width="631"]]
347 347  
348 -Run (% style="background-color:yellow" %) **sudo raspi-config**(%%) to open the config window
349 349  
350 -[[image:1651745476754-240.png||height="234" width="629"]]
351 -
342 +(% style="text-align:center" %)
352 352  [[image:image-20220505181135-1.png]]
353 353  
354 -[[image:image-20220505181135-2.png||height="229" width="622"]]
345 +(% style="text-align:center" %)
346 +[[image:image-20220505181135-2.png]]
355 355  
356 356  
357 357  
358 -In RPI, Fist: Enter the root account:
359 359  
360 -(((
361 -[[image:1651745583363-614.png||height="151" width="732"]]
351 + In RPI , Fist: Enter root account:
362 362  
363 -
364 -)))
353 +(% style="text-align:center" %)
354 +[[image:1651745583363-614.png]]
365 365  
366 -and then run:
367 367  
368 -(% style="background-color:#dcdcdc" %)wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
357 + and then run:
369 369  
370 -(% style="background-color:#dcdcdc" %)chmod +x ./auto_install.sh
359 + wget [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh>>url:https://www.dragino.com/downloads/downloads/LoRa_Gateway/PG1302/software/auto_install.sh]]
371 371  
372 -(% style="background-color:#dcdcdc" %)./auto_install.sh
361 + chmod +x ./auto_install.sh
373 373  
374 -(((
375 -[[image:1651745611629-818.png||height="225" width="729"]]
376 -)))
363 + ./auto_install.sh
377 377  
378 -This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
365 +(% style="text-align:center" %)
366 +[[image:1651745611629-818.png]]
379 379  
380 -You can get these output:
381 381  
382 -(((
383 -[[image:1651745657252-173.png||height="426" width="621"]]
369 + This will download the packet forwarder package from Dragino Server to RPI, and start install the package.
384 384  
371 + You can get these output:
385 385  
386 -
387 -)))
373 +(% style="text-align:center" %)
374 +[[image:1651745657252-173.png||height="426" width="621"]]
388 388  
389 -=== **5.2.2 Config Gateway ID, Frequency Band and Server address** ===
390 390  
377 +===== 5.2.2 Config Gateway ID, Frequency Band and Server address =====
391 391  
392 -(((
393 -After installation, user can find the configuration file in** (% style="color:#0000ff" %)/etc/lora/ (%%)**Replace the gateway ID we got above to the (% style="color:#0000ff" %)**gateway_ID** (%%)in file (% style="color:#0000ff" %)**local_conf.json.**
394 -)))
379 + After installation, user can find the configuration file in** /etc/lora/ **Replace the gateway ID we got above to the **gateway_ID** in file **local_conf.json**
395 395  
396 -(((
397 -The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file (% style="color:#0000ff" %)**local_conf.json**(%%), like below.
381 + The default LoRaWAN server points to localhost, user need to put the correct server address to the server_address field in file **local_conf.json**, like below.
398 398  
399 -
400 -)))
401 -
383 +(% style="text-align:center" %)
402 402  [[image:1651745709709-887.png||height="820" width="621"]]
403 403  
404 404  
405 -User can find the TTN v3 server address from: [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
387 + User can find the TTN v3 server address from:
406 406  
407 -And the default frequency band is US915 in (% style="color:#0000ff" %)**global_conf.json**(%%) file.
389 + [[Server Addresses ~| The Things Stack for LoRaWAN (thethingsindustries.com)>>url:https://www.thethingsindustries.com/docs/getting-started/server-addresses/#deployments]]
408 408  
409 -[[image:1651745838008-820.png||height="650" width="621"]]
410 410  
392 + And the default frequency band is US915 in **global_conf.json** file.
411 411  
412 -* If user want to change to other frequency bands, User can copy the file from(% style="color:#0000ff" %)** /etc/lora/cfg-302**(%%) ** **and put it into** (% style="color:#0000ff" %)/etc/lora/global_conf.json(%%).**
394 +(% style="text-align:center" %)
395 +[[image:1651745838008-820.png||height="650" width="621"]]
413 413  
414 -**~ 1). Chose your need the name of region frequency.**
415 415  
416 -[[image:1651745867516-322.png||height="83" width="740"]]
398 +* If user want to change to other frequency bands, User can copy the file from **/etc/lora/cfg-302 **and put it into** /etc/lora/global_conf.json.**
417 417  
400 + 1).Chose your need the name of region frequency.
418 418  
402 +(% style="text-align:center" %)
403 +[[image:1651745867516-322.png]]
419 419  
420 -**~ 2). Use this command to copy it.**
421 421  
422 -(% class="box infomessage" %)
423 -(((
424 - ** cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json**
425 -)))
406 + 2). Use this command to copy it.
426 426  
427 -[[image:1651745984006-868.png||height="87" width="745"]]
408 + cp /etc/lora/cfg-302/EU-global_conf.json /etc/lora/global_conf.json
428 428  
410 +(% style="text-align:center" %)
411 +[[image:1651745984006-868.png]]
429 429  
430 -* If user wants to change to other LoRaWAN server, modify the (% style="color:#0000ff" %)**global_conf.json**(%%) file.
431 431  
414 +* If user wants to change to other LoRaWAN server, modify the **global_conf.json** file.
432 432  
433 -
434 -
435 -=== **5.2.3 Check result** ===
436 -
437 -
416 +(% class="wikigeneratedid" %)
438 438  (((
439 -Run below command to restart the dragino_fwd:
418 +
440 440  )))
441 441  
442 -(((
443 -(% class="box infomessage" %)
444 -(((
445 -**sudo systemctl stop draginofwd**
446 -)))
421 +===== 5.2.3 Check result =====
447 447  
448 -(% class="box infomessage" %)
449 -(((
450 -**sudo systemctl start draginofwd**
451 -)))
452 -)))
423 + Run below command to restart the dragino_fwd:
453 453  
425 + sudo systemctl stop draginofwd
454 454  
455 -(((
456 -debug check the ruing status of fwd:
457 -)))
427 + sudo systemctl start draginofwd
458 458  
459 -(((
460 -(% class="box infomessage" %)
461 -(((
462 -**sudo systemctl status draginofwd**
463 -)))
464 -)))
429 + debug check the ruing status of fwd:
465 465  
466 -[[image:1651746045057-414.png||height="193" width="729"]]
431 + sudo systemctl status draginofwd
467 467  
433 +(% style="text-align:center" %)
434 +[[image:1651746045057-414.png]]
468 468  
469 469  
470 -The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
437 + The dragino_fwd will start with the new gateway ID and TTN v3 should show the connection ok:
471 471  
472 -
439 +(% style="text-align:center" %)
473 473  [[image:1651746078253-168.png||height="372" width="621"]]
474 474  
475 475  
476 476  
477 -We can check dragino_fwd running states in RPi by running:
444 + We can check dragino_fwd running states in RPi by running:
478 478  
479 -(% class="box infomessage" %)
480 -(((
481 -**~ sudo journalctl -u draginofwd -f**
482 -)))
446 + //**sudo journalctl -u draginofwd -f**//
483 483  
484 -[[image:1651746111963-838.png||height="184" width="730"]]
448 +(% style="text-align:center" %)
449 +[[image:1651746111963-838.png]]
485 485  
486 486  
487 - If there are LoRaWAN nodes transmitting nearby, we can see the traffic in (% style="color:#037691" %)**TTN v3 –> Gateway ~-~-> Live data**
488 488  
453 + If there are LoRaWAN nodes transmits nearby, we can see the traffic in TTN v3 –> Gateway ~-~-> Live data
454 +
455 +(% style="text-align:center" %)
489 489  [[image:1651746139304-966.png||height="326" width="621"]]
490 490  
491 491  
492 492  
493 -=== **5.2.4 Commands to handle service** ===
460 +===== 5.2.4 Commands to handle service =====
494 494  
462 +* **Stop** dragino_fwd service:  sudo systemctl stop draginofwd
463 +* **Disable** dragino_fwd auto run after boot: sudo systemctl disable draginofwd
464 +* **Start** dragino_fwd : sudo systemctl start draginofwd
465 +* **Auto run** dragino_fwd after boot:  sudo systemctl enable draginofwd
466 +* **Show status** of dragino_fwd:  sudo systemctl status draginofwd
495 495  
496 -* (% style="color:#0000ff" %)**Stop** (%%)dragino_fwd service:  sudo systemctl stop draginofwd
497 -* (% style="color:#0000ff" %)**Disable**(%%) dragino_fwd auto run after boot: sudo systemctl disable draginofwd
498 -* (% style="color:#0000ff" %)**Start** (%%)dragino_fwd : sudo systemctl start draginofwd
499 -* (% style="color:#0000ff" %)**Auto run**(%%) dragino_fwd after boot:  sudo systemctl enable draginofwd
500 -* (% style="color:#0000ff" %)**Show status** (%%)of dragino_fwd:  sudo systemctl status draginofwd
468 +=== 6. Order Info ===
501 501  
502 -= **6. Order Info** =
470 + Part Number: **PG1302-XX**  Or Part Number: **PG1302-PI-XX   **(Include RPi converter board for RPI 3/4)
503 503  
472 +**~ XX:**
504 504  
505 -Part Number: (% style="color:#0000ff" %)**PG1302-XX**   (%%) Or  Part Number: (% style="color:#0000ff" %)**PG1302-PI-XX   **(%%)(Include RPi converter board for RPI 3/4)
474 +* 868 (For Bands: EU868,IN865)
475 +* 915 (For Bands: US915,AU915,AS923,KR920)
476 +* 470 (For Band: CN470)
506 506  
507 -**~ (% style="color:#0000ff" %)XX:(%%)**
478 +=== 7. Packing Info ===
508 508  
509 -* (% style="color:red" %)**868** (%%)(For Bands: EU868,IN865)
510 -* (% style="color:red" %)**915** (%%)(For Bands: US915,AU915,AS923,KR920)
511 -* (% style="color:red" %)**470** (%%)(For Band: CN470)
480 +**~ PG1302 Package Includes**:
512 512  
513 -
514 -= **7. Packing Info** =
515 -
516 -(((
517 -
518 -
519 -**PG1302 Package Includes**:
520 -)))
521 -
522 -(((
523 -(((
524 524  * PG1302 x 1
525 525  * LoRa Antenna x 1
526 -)))
527 -)))
528 528  
529 -(((
530 -
485 +**~ PG1302-PI Package Includes**:
531 531  
532 -
533 -**PG1302-PI Package Includes**:
534 -)))
535 -
536 536  * PG1302 x 1
537 537  * LoRa Antenna x 1
538 538  * RPi3/4 converter PCB
539 539  * Screws to hole converter PCB on RPI.
540 540  
541 -**PG1302-PI Dimension and weight: **
492 +=== 8. Reference ===
542 542  
543 -* Device Size: 18 x 8 x 4 cm
544 -* Weight: 150g
494 +* Datasheet, User Manual & Software Download:
545 545  
496 + [[https:~~/~~/www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0>>url:https://www.dropbox.com/sh/f6nbldh1qbspya5/AACgL6pDkwdBQO1BQqq_Nubwa?dl=0]]
546 546  
547 -(((
548 -= **8. Support** =
549 549  
499 +=== 9. Support ===
550 550  
551 -(((
552 -If you are experiencing issues and can't solve, you can send mail to
553 -)))
501 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
502 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
554 554  
555 -(((
556 -[[support@dragino.com>>mailto:support@dragino.com]]
557 -)))
558 -
559 -(((
560 -With your question as detail as possible. We will reply and help you in the shortest.
561 -)))
562 -)))
504 + [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
image-20220616085956-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -717.6 KB
Content
image-20220621104746-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -861.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0