Skip to Content
Last modified by Xiaoling on 2023/07/24 09:53
From version 33.2
edited by Xiaoling
on 2022/11/21 18:05
Change comment: There is no comment for this version
To version 30.1
edited by Xiaoling
on 2022/11/21 17:11
Change comment: Uploaded new attachment "1669021903207-809.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -2,14 +2,15 @@
2 2  [[image:1669017918121-199.png||height="359" width="358"]]
3 3  
4 4  
5 -**Table of Contents:**
6 6  
7 -{{toc/}}
8 8  
9 9  
10 10  
11 11  
12 12  
11 +
12 +
13 +
13 13  = 1. Overview =
14 14  
15 15  == 1.1 What is Dragino LoRaWAN IoT Kit v3? ==
... ... @@ -36,8 +36,6 @@
36 36  
37 37  * Support various network structures
38 38  
39 -
40 -
41 41  == 1.3 What can you learn from the kit? ==
42 42  
43 43  
... ... @@ -57,8 +57,6 @@
57 57  
58 58  * Learn different way to connect LoRaWAN network to IoT Server and compare their advantages / disadvantages.
59 59  
60 -
61 -
62 62  == 1.4 What parts Dragino LoRa IoT v3 includes? ==
63 63  
64 64  
... ... @@ -84,8 +84,6 @@
84 84  
85 85  * 20 x dupont cable (male to female)
86 86  
87 -
88 -
89 89  = 2. Example 1: Test a LoRaWAN network =
90 90  
91 91  
... ... @@ -97,7 +97,6 @@
97 97  [[image:1669019691933-772.png]]
98 98  
99 99  
100 -
101 101  (% style="color:blue" %)**STEPS:**
102 102  
103 103  ~1. Register LPS8v2 gateway to TTN so provide a LoRaWAN coverage. See section “[[Gateway Registration for Semtech UDP ~~-~~-~> Primary LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H2.A0GatewayRegistrationforSemtechUDP]]” 
... ... @@ -107,12 +107,12 @@
107 107  3. Register LA66 USB to TTN and track people location. See “[[Example: Use of LA66 USB LoRaWAN Adapter and mobile APP>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.9A0Example:UseofA0LA66USBLoRaWANAdapterandmobileAPP]]”
108 108  
109 109  
110 -
111 111  (% style="color:blue" %)**Result:**
112 112  
113 113   [[image:1669019732684-677.png]]
114 114  
115 115  
109 +
116 116  = 3. Example 2: Test Built-In LoRaWAN Server =
117 117  
118 118  
... ... @@ -173,9 +173,9 @@
173 173  
174 174  In this example, the end nodes LA66 Shield and LA66 USB are not use LoRaWAN protocol. Users need to flash them with the firmware support private LoRa.
175 175  
176 -* (% style="color:blue" %)**Software Location:**(%%)**  [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**
170 +* **Software Location: [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**
177 177  
178 -* (% style="color:blue" %)**How to Flash Firmware:  **(%%)** [[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].**
172 +* **How to Flash Firmware: [[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].**
179 179  
180 180  This example will show how to get Temperature sensor value from LA66 Shield and send it to LA66 USB. LA66 USB is connected to mobile phone. So user can see the temperature value in mobile phone directly . User can also send message from mobile phone to LA66 to control the RGB LED.
181 181  
... ... @@ -185,35 +185,35 @@
185 185  === 5.1.1 Set up LA66 Module ===
186 186  
187 187  
188 -LA66 Module is loaded with the firmware **[[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]** and user can use AT Command to set up LA66 with below parameters:
182 +LA66 Module is loaded with the firmware [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] and user can use AT Command to set up LA66 with below parameters:
189 189  
190 -(% class="box infomessage" %)
191 -(((
192 -(% style="color:#037691" %)**AT+FRE=904.100,904.100   ** (%%) ~-~->  TX and RX frequency set: 9041100000
193 193  
194 -(% style="color:#037691" %)**AT+BW=0,0 ** (%%) ~-~->  TX and RX Bandwidth set: 125kHz
185 +(% style="color:#037691" %)**AT+FRE=904.100,904.100   ** (%%) ~-~-->  TX and RX frequency set: 9041100000
195 195  
196 -(% style="color:#037691" %)**AT+SF=12,12    ** (%%) ~-~->  TX and RX Spreading Factor set: SF10
187 +(% style="color:#037691" %)**AT+BW=0,0 ** (%%) ~-~-->  TX and RX Bandwidth set: 125kHz
197 197  
198 -(% style="color:#037691" %)**AT+CRC=1,1  ** (%%) ~-~->  0: CRC OFF ,1: CRC ON
189 +(% style="color:#037691" %)**AT+SF=12,12    ** (%%) ~-~-->  TX and RX Spreading Factor set: SF10
199 199  
200 -(% style="color:#037691" %)**AT+HEADER=0,0**       (%%) ~-~->  Header Type: explicit, explicit
191 +(% style="color:#037691" %)**AT+CRC=1,1  ** (%%) ~-~-->  0: CRC OFF ,1: CRC ON
201 201  
202 -(% style="color:#037691" %)**AT+CR=1,1  ** (%%) ~-~->  CR: 4/5, 4/5
193 +(% style="color:#037691" %)**AT+HEADER=0,0**       (%%) ~-~-->  Header Type: explicit, explicit
203 203  
204 -(% style="color:#037691" %)**AT+IQ=0,0**        (%%) ~-~->  Invert IQ: 0,0
195 +(% style="color:#037691" %)**AT+CR=1,1  ** (%%) ~-~-->  CR: 4/5, 4/5
205 205  
206 -(% style="color:#037691" %)**AT+PREAMBLE=8,8  ** (%%) ~-~->  TX and RX Preamble Length set: 8
197 +(% style="color:#037691" %)**AT+IQ=0,0**        (%%) ~-~-->  Invert IQ: 0,0
207 207  
208 -(% style="color:#037691" %)**AT+SYNCWORD=0**     (%%) ~-~->  Syncword**(0: private，1: public)**
199 +(% style="color:#037691" %)**AT+PREAMBLE=8,8  ** (%%) ~-~-->  TX and RX Preamble Length set: 8
209 209  
210 -(% style="color:#037691" %)**AT+RXMOD=6,0   ** (%%) ~-~->  Rx Timeout and Reply mode
211 -)))
201 +(% style="color:#037691" %)**AT+SYNCWORD=0**     (%%) ~-~-->  Syncword**(0: private，1: public)**
212 212  
203 +(% style="color:#037691" %)**AT+RXMOD=6,0   ** (%%) ~-~-->  Rx Timeout and Reply mode
213 213  
205 +
206 +
214 214  === 5.1.2 Hardware Connection ===
215 215  
216 216  
210 +
217 217  [[image:1669020260360-253.png]]
218 218  
219 219  
... ... @@ -223,7 +223,7 @@
223 223  === 5.1.3 Set up Arduino UNO ===
224 224  
225 225  
226 -The sketch for this example is **[[Log-Temperature-Sensor-and- Control-RBG-LED.ino>>url:https://www.dropbox.com/sh/r5l3h5fhifrqbxn/AACgNoQ-aYnvWOxGwUDWxNlFa?dl=0]]**
220 +The sketch for this example is [[Log-Temperature-Sensor-and- Control-RBG-LED.ino>>url:https://www.dropbox.com/sh/r5l3h5fhifrqbxn/AACgNoQ-aYnvWOxGwUDWxNlFa?dl=0]]
227 227  
228 228  
229 229  (% style="color:blue" %)**Upload the code to UNO:**
... ... @@ -240,10 +240,9 @@
240 240  == 5.2 Set Up LA66 USB ==
241 241  
242 242  
243 -LA66 USB is loaded with the firmware **[[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]** and user can use AT Command to set up LA66 USB with below parameters:
237 +LA66 USB is loaded with the firmware [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]] and user can use AT Command to set up LA66 USB with below parameters:
244 244  
245 -(% class="box infomessage" %)
246 -(((
239 +
247 247  (% style="color:#037691" %)**AT+FRE=904.100,904.100**(%%)  ~-~->  TX and RX frequency set: 904100000 
248 248  
249 249  (% style="color:#037691" %)**AT+BW=0,0**    (%%) ~-~->  TX and RX Bandwidth set: 125kHz
... ... @@ -265,11 +265,11 @@
265 265  (% style="color:#037691" %)**AT+RXMOD=65535,0**  (%%) ~-~->  Set the receive mode
266 266  
267 267  (% style="color:#037691" %)**AT+RXDAFORM=1**  (%%) ~-~->  ASCII to string
268 -)))
269 269  
262 +
270 270  Users using USB to Type-C adapter is needed to connect to a Mobile phone, Users need to download the USB Serial APP in their phones.
271 271  
272 -For example, **[[USB Serial Console>>url:https://play.google.com/store/apps/details?id=jp.sugnakys.usbserialconsole]]** (Android Version Only)
265 +For example, [[USB Serial Console>>url:https://play.google.com/store/apps/details?id=jp.sugnakys.usbserialconsole]] (Android Version Only)
273 273  
274 274  
275 275  [[image:1669020888886-358.png]]
... ... @@ -283,48 +283,50 @@
283 283  
284 284  == 5.3 Test result ==
285 285  
279 +(% style="display:none" %) (%%)
286 286  
287 287  Users can view the temperature and humidity information received by LA66 USB in the mobile APP
288 288  
289 - [[image:1669021002246-577.png]] [[image:1669021002645-501.png]]
283 + [[image:1669021002246-577.png]] ​​​​​​​[[image:1669021002645-501.png]]
290 290  
291 291  Send a message to the LA66 USB control LA66 Shield + UNO external RBG LED through the mobile phone:
292 292  
293 293  
294 -For example, if you send (% style="color:blue" %)**AT+SEND=1,000101,2,0**(%%) the RBG LED will light up red.
288 +For example, if you send **AT+SEND=1,000101,2,0** the (% style="display:none" %) (%%)RBG LED will light up red.(% style="display:none" %)
295 295  
296 -[[image:1669021075655-472.png]]
290 +[[image:1669021075655-472.png]](% style="display:none" %)
297 297  
298 298  
293 +
299 299  [[image:1669021098924-484.png]]
300 300  
301 301  
302 -= 6. Example 5: Peer to Peer Test and plot the data in LPS8v2 =
303 303  
304 304  
299 += 6. Example 5: Peer to Peer Test and plot the data in LPS8v2 =
300 +
305 305  This example describes how to test peer to peer communicate between LoRa End Node and LoRa Gateway.
306 306  
303 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
307 307  
308 -[[image:1669021294907-277.png]]
309 -
310 -
311 311  In this example, the end nodes LA66 Shield and LA66 USB are not use LoRaWAN protocol. Users need to flash them with the firmware support private LoRa.
312 312  
313 -* (% style="color:blue" %)**Software Location**(%%)**: [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]**
307 +* (% style="color:blue" %)Software Location(%%): [[LA66 Peer to Peer firmware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
314 314  
315 -* (% style="color:blue" %)**How to Flash Firmware**(%%)**: [[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].**
309 +* (% style="color:blue" %)How to Flash Firmware(%%): [[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].
316 316  
317 317  This example will show how to get Temperature sensor value from LA66 Shield and send it to LA66 USB. LA66 USB is connected to LPS8v2. LPS8v2 will receive the data from LA66 USB and plot the data in the built-in Node-Red server.
318 318  
319 319  (% style="color:red" %)**Notice:**
320 320  
321 -1. LPS8v2 has LoRaWAN concentrator which doesn't do anything in this example. This example doesn't need this SX1302 concentrator.
315 +1. LPS8v2 has LoRaWAN concentrator which doesn’t do anything in this example. This example doesn’t need this SX1302 concentrator.
316 +2. For mass deployment, user can use the LG01v2 instead of LPS8v2+LA66 USB. LG01v2 already include LA66 module inside.
322 322  
323 - 2. For mass deployment, user can use the LG01v2 instead of LPS8v2+LA66 USB. LG01v2 already include LA66 module inside.
318 +Use can check [[THIS LINK>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H5.2Example:LG01v2]] for an instruction of this example. In the link it uses LG01v2 as example, the use for LPS8v2+LA66 USB is the same as LG01v2.
324 324  
325 -Use can check **[[THIS LINK>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LG01v2/#H5.2Example:LG01v2]]** for an instruction of this example. In the link it uses LG01v2 as example, the use for LPS8v2+LA66 USB is the same as LG01v2.
326 326  
327 327  
322 +
328 328  = 7. Example 6: Limited LoRaWAN relay =
329 329  
330 330  
... ... @@ -331,127 +331,119 @@
331 331  This example describes a limited LoRaWAN relay method with the use of LA66 module.
332 332  
333 333  
334 -[[image:1669021378154-590.png]]
329 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
335 335  
336 336  
337 337  In this example, the end nodes LA66 Shield and LA66 USB are not use LoRaWAN protocol. Users need to flash them with the firmware support private LoRa.
338 338  
339 -* (% style="color:blue" %)**Software Location**(%%): **[[LA66 USB use LoRaWAN firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]], [[LA66 Shield use Point to Point firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]].**
334 +* (% style="color:blue" %)**Software Location**(%%): [[LA66 USB use LoRaWAN firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]], [[LA66 Shield use Point to Point firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]].
340 340  
341 -* (% style="color:blue" %)**How to Flash Firmware**(%%):  **[[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].**
336 +* (% style="color:blue" %)**How to Flash Firmware**(%%): [[For LA66 Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/#H1.9A0UpgradeFirmwareofLA66LoRaWANShield]] , For [[LA66 USB>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/#H1.10A0UpgradeFirmwareofLA66USBLoRaWANAdapter]].
342 342  
343 -(% style="color:red" %)**Note: LA66 USB use a LoRaWAN version firmware and user need to set it to work in fix frequency, fix DR and ABP mode. LA66 already register to TTNv3 in ABP mode.**
338 +(% style="color:red" %)Note: LA66 USB use a LoRaWAN version firmware and user need to set it to work in fix frequency, fix DR and ABP mode. LA66 already register to TTNv3 in ABP mode.
344 344  
345 345  
346 346  == 7.1 Set up LA66 USB ==
347 347  
343 +LA66 USB is loaded with the firmware [[LA66 USB use LoRaWAN firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]] and user can use AT Command to set up LA66 with below parameters:
348 348  
349 -LA66 USB is loaded with the firmware **[[LA66 USB use LoRaWAN firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]]** and user can use AT Command to set up LA66 with below parameters:
345 +AT+CHS=904100000    ~-~-> Fix frequency
350 350  
351 -(% class="box infomessage" %)
352 -(((
353 -(% style="color:#037691" %)**AT+CHS=904100000** (%%) ~-~->  Fix frequency
347 +AT+NJM=0            ~-~->Set the ABP mode
354 354  
355 -(% style="color:#037691" %)**AT+NJM=0  ** (%%) ~-~->  Set the ABP mode
349 +AT+ADR=0            ~-~->Close ADR
356 356  
357 -(% style="color:#037691" %)**AT+ADR=0**   (%%) ~-~->  Close ADR
351 +AT+DR=0             ~-~-> Fix DR=0
358 358  
359 -(% style="color:#037691" %)**AT+DR=0 ** (%%) ~-~->  Fix DR=0
360 -)))
361 -
362 362  Set up LA66 USB t work in ABP mode, use fix frequency(904100000) and fix DR0(SF10) to transmit data.
363 363  
364 364  
356 +
365 365  == 7.2 Set up LA66 Shield ==
366 366  
359 +LA66 Shield is loaded with the firmware [[LA66 Shield use Point to Point firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]], LA66 Shield as Relay needs to be configured as follows:
367 367  
368 -LA66 Shield is loaded with the firmware **[[LA66 Shield use Point to Point firmware>>url:https://www.dropbox.com/sh/els49fz9rd6fu1y/AAAt-kKIvXu1ZOK0hWysq97na?dl=0]]**, LA66 Shield as Relay needs to be configured as follows:
361 +AT+FRE=904.100,904.100  ~-~->TX and RX frequency set: 904100000 
369 369  
370 -(% class="box infomessage" %)
371 -(((
372 -(% style="color:#037691" %)**AT+FRE=904.100,904.100**(%%)  ~-~-> TX and RX frequency set: 904100000 
363 +AT+BW=0,0     ~-~->TX and RX Bandwidth set: 125kHz
373 373  
374 -(% style="color:#037691" %)**AT+BW=0,0**(%%)  ~-~-> TX and RX Bandwidth set: 125kHz
365 +AT+SF=10,10   ~-~->TX and RX Spreading Factor set: SF10(corresponding toDR=0)
375 375  
376 -(% style="color:#037691" %)**AT+SF=10,10**(%%)  ~-~-> TX and RX Spreading Factor set: SF10(corresponding toDR=0)
367 +AT+CRC=1,1     ~-~->0: CRC OFF ,1: CRC ON
377 377  
378 -(% style="color:#037691" %)**AT+CRC=1,1**(%%)  ~-~-> 0: CRC OFF ,1: CRC ON
369 +AT+HEADER=0,0     ~-~->Header Type: explicit, explicit
379 379  
380 -(% style="color:#037691" %)**AT+HEADER=0,0**(%%)  ~-~-> Header Type: explicit, explicit
371 +AT+CR=1,1       ~-~->CR: 4/5, 4/5
381 381  
382 -(% style="color:#037691" %)**AT+CR=1,1**(%%)  ~-~-> CR: 4/5, 4/5
373 +AT+IQ=0,0       ~-~->Invert IQ: 0,0
383 383  
384 -(% style="color:#037691" %)**AT+IQ=0,0**(%%)  ~-~-> Invert IQ: 0,0
375 +AT+PREAMBLE=8,8 ~-~->TX and RX Preamble Length set: 8
385 385  
386 -(% style="color:#037691" %)**AT+PREAMBLE=8,8**(%%)  ~-~-> TX and RX Preamble Length set: 8
377 +AT+SYNCWORD=1  ~-~->Syncword**(0: private，1: public)**
387 387  
388 -(% style="color:#037691" %)**AT+SYNCWORD=1**(%%)  ~-~-> Syncword**(0: private，1: public)**
379 +AT+RXMOD=65535,1      ~-~->Set the Relay mode
389 389  
390 -(% style="color:#037691" %)**AT+RXMOD=65535,1 **(%%) ~-~-> Set the Relay mode
381 +AT+WAITTIME=1000      ~-~->Relay wait time 1000ms
391 391  
392 -(% style="color:#037691" %)**AT+WAITTIME=1000**(%%)  ~-~-> Relay wait time 1000ms
393 -)))
394 394  
395 395  
396 396  == 7.3 Uplink test ==
397 397  
387 +Users can connect to the LA66 USB using the serial port tool and enter the AT command: AT+SENDB=01,02,8,05820802581ea0a5
398 398  
399 -Users can connect to the LA66 USB using the serial port tool and enter the (% style="color:blue" %)**AT command: AT+SENDB=01,02,8,05820802581ea0a5**
389 +Command format:  AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>
400 400  
401 -(% style="color:#037691" %)**Command format:  AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
391 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
402 402  
403 -[[image:1669021802668-328.png]]
404 404  
394 +In addition, users can also access LA66 USB using the mobile app [[Download Link for Android apk >>url:https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]] (Android Version Only)
405 405  
406 -In addition, users can also access LA66 USB using the mobile app **[[Download Link for Android apk >>url:https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** (Android Version Only)
396 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.jpg]]
407 407  
408 -[[image:1669021860044-222.png]]
409 409  
410 410  
411 411  == 7.4 Test result ==
412 412  
413 -
414 414  See two duplicate messages on Gateway Traffic.
415 415  
416 -[[image:1669021878786-276.png]]
404 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
417 417  
418 418  
419 -
420 420  Bring LA66 USB and walk to a remote location to get the max distance. At this point,RSSi=-134 SNR=13.8, Go back 100 meters and put the LA66 Shield (Relay) in the location, Due to the following examples, there may be errors in the test in the urban area.
421 421  
422 -[[image:1669021889556-608.png]]
409 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
423 423  
424 424  
425 425  
426 -Without Relay, the LA66 USB can reach about 833meters.
413 +Without Relay, the LA66 USB can reach about 833meters. [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
427 427  
428 -[[image:1669021903207-809.png]]
415 +With Relay, the LA66 USB can reach around 2km.
429 429  
417 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.jpg]]
430 430  
431 431  
432 -With Relay, the LA66 USB can reach around 2km.
433 433  
434 -[[image:1669021922274-909.png]]
435 435  
436 436  
423 +
437 437  = 8. Technical Support =
438 438  
439 -
440 440  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
441 441  
442 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LG02/support@dragino.com]]
428 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
443 443  
430 +[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LG02/support@dragino.com]]
444 444  
445 445  
433 +
446 446  = 9. Reference =
447 447  
436 +1. [[LoRaWAN official website. And Technicel document for LoRaWAN.>>url:https://lora-alliance.org/lorawan-for-developers]]
448 448  
449 -**1. [[LoRaWAN official website. And Technicel document for LoRaWAN.>>url:https://lora-alliance.org/lorawan-for-developers]]**
438 +2. [[LoRa Low Energy design guide>>url:https://www.semtech.com/uploads/documents/LoraLowEnergyDesign_STD.pdf]] and [[Calculator Tool>>url:https://www.semtech.com/uploads/documents/SX1272LoRaCalculatorSetup1_1.zip]].
450 450  
451 -**2. [[LoRa Low Energy design guide>>url:https://www.semtech.com/uploads/documents/LoraLowEnergyDesign_STD.pdf]] and [[Calculator Tool>>url:https://www.semtech.com/uploads/documents/SX1272LoRaCalculatorSetup1_1.zip]].**
440 +3. About Distance: [[LoRa Modem Design Guide>>url:https://www.semtech.com/uploads/documents/LoraDesignGuide_STD.pdf]]
452 452  
453 -**3. About Distance: [[LoRa Modem Design Guide>>url:https://www.semtech.com/uploads/documents/LoraDesignGuide_STD.pdf]]**
442 +4. User Manual: [[LPS8v2>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/]], [[LA66 LoRaWAN Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/]] , [[LA66 USB LoRaWAN Adapter>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]
454 454  
455 -**4. User Manual: [[LPS8v2>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/]], [[LA66 LoRaWAN Shield>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/]] , [[LA66 USB LoRaWAN Adapter>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20USB%20LoRaWAN%20Adapter%20User%20Manual/]]**
456 -
457 457  
1669021922274-909.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -376.4 KB
Content