Wiki source code of LPS8N - LoRaWAN Gateway User Manual

Version 128.1 by Xiaoling on 2022/07/06 16:04

version	line-number	content
73.5	1	(% style="text-align:center" %)
94.2	2	[[image:1656917428377-954.png\|\|height="475" width="475"]]
50.3	3
	4
	5
	6
74.2	7	Table of Contents：
50.3	8
	9
	10
	11
	12
81.1	13
50.3	14
	15
	16
	17
	18
	19
94.2	20
96.2	21	(% style="color:inherit; font-family:inherit; font-size:29px" %)1. Introduction
94.2	22
96.2	23	== 1.1 What is the LPS8N ==
94.2	24
	25
	26
95.4	27	(((
94.2	28	The LPS8N is an (% style="color:#4f81bd" %)open source LoRaWAN Indoor Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
95.4	29	)))
94.2	30
95.4	31	(((
94.2	32	The LPS8N uses (% style="color:#4f81bd" %)Semtech packet forwarder(%%) & (% style="color:#4f81bd" %)LoRaWAN Station connection(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator(%%), which provides 10 programmable parallel demodulation paths.
95.4	33	)))
94.2	34
95.4	35	(((
94.2	36	LPS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries. User can also (% style="color:#4f81bd" %)customized the frequency bands (%%)to use in their own LoRa network.
95.4	37	)))
94.2	38
95.4	39	(((
94.2	40	LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
95.4	41	)))
94.2	42
75.2	43	(((
94.2	44
75.2	45	)))
50.3	46
95.2	47	[[image:1656918270059-192.png]]
50.3	48
95.2	49
96.2	50	== 1.2 Specifications ==
50.3	51
	52
95.2	53	(% style="color:#037691" %)Hardware System:
	54
75.3	55	(((
50.3	56	Linux Part:
75.3	57	)))
50.3	58
	59	* 400Mhz ar9331 processor
	60	* 64MB RAM
	61	* 16MB Flash
	62
95.2	63	(% style="color:#037691" %)Interface:
	64
50.3	65	* 10M/100M RJ45 Ports x 1
	66	* WiFi : 802.11 b/g/n
	67	* LoRaWAN Wireless
95.2	68	* Power Input: 5V DC, 2A, Type C
50.3	69	* USB 2.0 host connector x 1
	70	* Mini-PCI E connector x 1
	71	* SX1302 + 2 x SX1250
	72
95.2	73	(% style="color:#037691" %)WiFi Spec:
	74
50.3	75	* IEEE 802.11 b/g/n
	76	* Frequency Band: 2.4 ~~ 2.462GHz
	77	* Tx power:
	78	** 11n tx power : mcs7/15: 11db mcs0 : 17db
	79	** 11b tx power: 18db
	80	** 11g 54M tx power: 12db
	81	** 11g 6M tx power: 18db
	82	* Wifi Sensitivity
	83	** 11g 54M : -71dbm
	84	** 11n 20M : -67dbm
	85
95.2	86	(% style="color:#037691" %)LoRa Spec:
	87
	88	* Up to -140 dBm sensitivity
50.3	89	* 70 dB CW interferer rejection at 1 MHz offset
	90	* Able to operate with negative SNR, CCR up to 9dB
	91	* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
	92	* Dual digital TX & RX radio front-end interfaces
	93	* 10 programmable parallel demodulation paths
	94	* Dynamic data-rate (DDR) adaptation
	95	* True antenna diversity or simultaneous dual-band operation
	96
95.2	97	(% style="color:#037691" %)Cellular 4G LTE (optional):
	98
	99	* Quectel [[EC25 LTE module>>url:https://www.quectel.com/product/ec25minipcie.htm]]
	100	* Micro SIM Slot
	101	* External 4G Sticker Antenna.
50.3	102	* Up to 150Mbps downlink and 50Mbps uplink data rates
	103	* Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
	104	* MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
	105
104.4	106
	107
96.2	108	== 1.3 Features ==
50.3	109
95.6	110	* Open Source OpenWrt system
	111	* Managed by Web GUI, SSH via WAN or WiFi
	112	* Remote access with Reverse-SSH or remote.it
	113	* Emulates 49x LoRa demodulators
	114	* LoRaWAN Gateway
	115	* 10 programmable parallel demodulation paths
	116	* Pre-configure to support different LoRaWAN regional settings.
	117	* Allow to customize LoRaWAN regional parameters.
	118	* Support Local decode ABP end node info and transfer to MQTT server
	119	* Support different level log in.
	120	* Support Semtech Packet Forwarder
	121	* Support LoRaWAN basic station.
	122	* Optional 3G/4G cellular connection
95.5	123
104.4	124
	125
96.2	126	== 1.4 Hardware System Structure ==
50.3	127
96.2	128	[[image:1657079015096-949.png]]
50.3	129
96.2	130
97.2	131	== 1.5 LPS8N Applications ==
50.3	132
97.2	133	[[image:1657079055940-721.png]]
50.3	134
	135
97.2	136	== 1.6 LED Indicators ==
	137
50.3	138
101.2	139	LPS8N has totally four LEDs, They are:
50.3	140
101.2	141	* Power LED [[image:image-20220706115518-1.png\|\|height="15" width="16"]] : This (% style="color:red" %)RED LED(%%) will be solid on if the device is properly powered.
	142	* LoRa LED [[image:image-20220706115518-2.png\|\|height="15" width="15"]] : This RGB LED will (% style="color:green" %)blink GREEN(%%) when LoRaWAN module starts or transmit a packet.
101.4	143	* SYS LED [[image:image-20220706115518-3.png\|\|height="16" width="16"]] : This RGB LED will shows different colors on different state:
101.2	144	(% style="color:blue" %)SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
104.5	145	(% style="color:blue" %)BLINKING BLUE(%%): a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will (% style="color:blue" %)BLINKING BLUE(%%) for several seconds and then with (% style="color:red" %)SOLID RED(%%) and (% style="color:blue" %)BLINKING BLUE**(%%) together
101.3	146	(% style="color:red" %)SOLID RED**(%%): Device doesn't have Internet connection.
50.3	147
101.2	148	* ETH LED [[image:image-20220706115518-4.png\|\|height="15" width="17"]] : This LED shows the ETH interface connection status.
50.3	149
103.2	150	= 2. Access and Configure LPS8N =
50.3	151
103.2	152	(((
	153	The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
	154	)))
50.3	155
	156
103.2	157	== 2.1 Find IP address of LPS8N ==
50.3	158
103.2	159	=== 2.1.1 Connect via WiFi ===
50.3	160
103.2	161	[[image:1657085974260-168.png]]
50.3	162
	163
103.2	164	At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)//dragino-xxxxxx //(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
	165
73.5	166	[[image:1652413127647-377.png]]
50.3	167
	168
75.3	169	(((
50.3	170	User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
103.2	171
	172
	173
75.3	174	)))
50.3	175
103.2	176	=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
50.3	177
103.2	178	[[image:1657086105922-299.png]]
50.3	179
	180
77.2	181	(((
103.2	182	Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
	183
	184
	185
77.2	186	)))
50.3	187
104.2	188	=== 2.1.3 Connect via WiFi with DHCP IP from router ===
50.3	189
104.2	190	[[image:1657086192720-649.png]]
50.3	191
	192
104.2	193	If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
50.3	194
	195
104.2	196
	197	=== 2.1.4 Connect via Ethernet with fall back ip ===
	198
104.5	199	The WAN port also has a [[fall back ip address>>\|\|anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>\|\|anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
50.3	200
104.2	201
	202
104.5	203	== 2.2 Access Configure Web UI ==
50.3	204
	205	Web Interface
	206
108.2	207	Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
50.3	208
	209	[[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
	210
	211	or
	212
	213	http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
	214
	215
108.2	216	You will see the login interface of LPS8N as shown below.
50.3	217
	218	The account details for Web Login are:
	219
	220	(% style="color:#4f81bd" %)User Name: root
	221
	222	(% style="color:#4f81bd" %)Password: dragino
	223
73.5	224	[[image:1652414287022-223.png]]
50.3	225
104.6	226
	227
108.2	228	= 3. Typical Network Setup =
50.3	229
108.2	230	== 3.1 Overview ==
50.3	231
108.2	232	The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
50.3	233
	234	* WAN Port Internet Mode
	235	* WiFi Client Mode
	236	* WiFi AP Mode
	237
104.6	238
	239
108.2	240	== 3.2 Use WAN port to access Internet ==
50.3	241
108.2	242	By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)home page:
50.3	243
	244
108.2	245	[[image:1657088560833-398.png]]
50.3	246
108.2	247
	248	== 3.3 Access the Internet as a WiFi Client ==
	249
50.3	250	In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
	251
77.2	252	(((
50.3	253	The settings for WiFi Client is under page (% style="color:#4f81bd" %)System~-~-> WiFi ~-~-> WiFi WAN Client Settings
108.2	254
	255	[[image:1657088818095-182.png]]
77.2	256	)))
50.3	257
	258
77.2	259	(((
50.3	260	In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
108.2	261
	262
77.2	263	)))
50.3	264
110.2	265	== 3.4 Use built-in 4G modem for internet access ==
50.3	266
108.2	267	(((
	268	(((
	269	If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
	270	)))
50.3	271
108.2	272
77.2	273	(((
108.2	274	First, install the Micro SIM card as below direction
77.2	275	)))
50.3	276
108.2	277	(((
	278	Second, Power off/ ON LPS8N to let it detect the SIM card.
	279	)))
	280	)))
50.3	281
	282
108.2	283	[[image:1657090855037-497.png]]
	284
80.2	285	(((
108.2	286
80.2	287	)))
50.3	288
77.2	289	(((
50.3	290	The set up page is (% style="color:#4f81bd" %)System ~-~-> Cellular
77.2	291	)))
50.3	292
77.2	293	(((
50.3	294	While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
77.2	295	)))
50.3	296
80.2	297	(((
108.2	298	[[image:1657090932270-444.png]]
80.2	299	)))
50.3	300
	301
110.2	302	== 3.5 Check Internet connection ==
50.3	303
	304	In the (% style="color:#4f81bd" %)home(%%) page, we can check the Internet connection.
	305
78.2	306	* GREEN Tick [[image:1652436675869-206.png\|\|height="14" width="15"]] : This interface has Internet connection.
110.2	307	* Yellow Tick [[image:1652436705761-420.png\|\|height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
111.2	308	* RED Cross [[image:1652436787176-950.png\|\|height="14" width="15"]] : This interface doesn't connected.
50.3	309
110.2	310	[[image:1657091099235-452.png]]
	311
50.3	312
	313
110.2	314	= 4. Example: Configure as a LoRaWAN gateway =
50.3	315
110.2	316	LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
	317
80.4	318	(((
110.2	319	[[image:1657091257648-882.png]]
80.4	320	)))
50.3	321
110.3	322	(((
	323	This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]] ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
	324	)))
50.3	325
	326
	327
110.3	328	== 4.1 Create a gateway in TTN V3 Server ==
	329
50.3	330	(% style="color:#4f81bd" %)Step 1: Get a Unique gateway ID.
	331
78.3	332	(((
111.2	333	Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
78.3	334	)))
50.3	335
80.4	336	(((
111.2	337	[[image:1657091583941-544.png]]
80.4	338	)))
50.3	339
111.2	340	The example gateway id is: (% style="color:green" %)a840411e96744154
50.3	341
111.2	342
50.3	343	(% style="color:#4f81bd" %)Step 2: Sign up a user account in TTN server
	344
	345	[[https:~~/~~/account.thethingsnetwork.org/register>>url:https://account.thethingsnetwork.org/register]]
	346
113.2	347	[[image:1657091739530-531.png]]
50.3	348
113.2	349
50.3	350	(% style="color:#4f81bd" %)Step 3: Choose the TTNv3 Cluster Picker
	351
80.4	352	(((
113.2	353	[[image:1657091719947-297.png]]
80.4	354	)))
50.3	355
	356	(% style="color:red" %)Note: Choose the cluster corresponds to a specific Gateway server address
	357
113.2	358
122.2	359	* Europe 1 (% style="color:red" %)corresponding Gateway server address:(%%)(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
	360	* North America 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)nam1.cloud.thethings.network
	361	* Australia 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)au1.cloud.thethings.network
	362	* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
50.3	363
113.2	364
	365
50.3	366	(% style="color:#4f81bd" %)Step 4: Create a Gateway
	367
116.2	368	[[image:1657091941182-367.png]]
50.3	369
	370	Click the Gateway icon and then click Add gateway.
	371
113.2	372
50.3	373	Open the following page:
	374
	375
116.2	376	[[image:image-20220706155323-5.png\|\|height="579" width="1060"]]
50.3	377
116.2	378
117.2	379	[[image:image-20220706155323-6.png\|\|height="582" width="1066"]]
116.2	380
	381
80.4	382	(((
50.3	383	(% style="color:red" %)Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
80.4	384	)))
50.3	385
	386	After creating the gateway, you can see the gateway info, as below.
	387
117.2	388	[[image:1657094130908-567.png]](% style="display:none" %)
50.3	389
117.2	390
117.3	391	== 4.2 Configure DLOS8N to connect to TTN v3 ==
50.3	392
80.4	393	(((
122.2	394	You can now configure the LPS8N to let it connect to TTN network V3.
80.4	395	)))
50.3	396
80.4	397	(((
122.2	398	Make sure your LPS8N has a working Internet Connection first.
80.4	399	)))
50.3	400
80.4	401	(((
50.3	402	Choose the right server provider and click (% style="color:#4f81bd" %)Save&Apply
80.4	403	)))
50.3	404
120.2	405	[[image:1657094183213-301.png]]
50.3	406
	407	(% style="color:red" %)Note: The server address must match the Gateway server address you choose in TTN V3.
	408
120.2	409
50.3	410	In the home page, we can see the LoRaWAN connection is ready now.
	411
120.2	412	[[image:1657094202420-798.png]]
50.3	413
120.2	414
50.3	415	In TTN v3 portal, we can also see the gateway is connected.
	416
120.2	417	[[image:1657094221515-510.png]]
50.3	418
120.2	419
122.2	420	== 4.3 Configure frequency ==
50.3	421
122.2	422	We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
50.3	423
122.2	424	[[image:1657094249818-468.png]]
50.3	425
	426
	427	In logread page, user can check the frequency actually used.
	428
122.2	429	[[image:1657094333704-207.png]]
50.3	430
	431
122.3	432	== 4.4 Add a LoRaWAN End Device ==
	433
78.3	434	(((
50.3	435	This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
78.3	436	)))
50.3	437
78.3	438	(((
50.3	439	We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
78.3	440	)))
50.3	441
73.5	442	[[image:1652422794767-871.png]]
50.3	443
78.3	444	(((
50.3	445	(% style="color:#4f81bd" %)Step 1: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
122.3	446
126.2	447
78.3	448	)))
50.3	449
78.3	450	(((
50.3	451	Three codes are required to define the device in TTN v3:
78.3	452	)))
50.3	453
	454	* DEV EUI - Unique ID code for a particular device.
	455	* APP EUI - ID code for an Application defined in TTN v3.
	456	* APP Key - Unique key to secure communications with a particular device.
	457
122.3	458
78.3	459	(((
50.3	460	A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
78.3	461	)))
50.3	462
126.2	463	[[image:1657094382177-591.png]]
50.3	464
78.3	465	(((
50.3	466	(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands. Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
126.2	467
	468
78.3	469	)))
50.3	470
78.3	471	(((
50.3	472	For the TTN v3 server, you can use the codes set in the device as in the following example.
78.3	473	)))
50.3	474
78.3	475	(((
50.3	476	Select Add Application to open the screen below.
78.3	477	)))
50.3	478
126.2	479	[[image:1657094417175-831.png]]
50.3	480
	481	Open the Application select Add end device
	482
126.2	483
50.3	484	Start Register the end device
	485
126.2	486	[[image:1657094444802-101.png]]
50.3	487
78.3	488	(((
50.3	489	Select OTAA activation mode
126.2	490
	491
78.3	492	)))
50.3	493
78.3	494	(((
50.3	495	The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
78.3	496	)))
50.3	497
126.2	498	[[image:1657094475730-208.png]]
50.3	499
	500	First, input the End device ID, AppEUI and DevEUI.
	501
	502
126.2	503
50.3	504	Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
	505
73.5	506	[[image:1652423046741-467.png\|\|height="355" width="736"]]
50.3	507
78.3	508	(((
50.3	509	Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
78.3	510	)))
50.3	511
78.3	512	(((
50.3	513	(% style="color:#4f81bd" %)Step 2: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
78.3	514	)))
50.3	515
78.3	516	(((
50.3	517	(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
78.3	518	)))
50.3	519
73.5	520	[[image:1652423277549-324.png\|\|height="273" width="745"]]
50.3	521
	522	= 5. Web Configure Pages =
	523
	524	== 5.1 Home ==
	525
	526	Shows the system running status.
	527
73.5	528	[[image:1652423418568-752.png\|\|height="329" width="724"]]
50.3	529
	530	== 5.2 LoRa Settings ==
	531
	532	=== 5.2.1 LoRa ~-~-> LoRa ===
	533
78.4	534	(((
50.3	535	This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
78.4	536	)))
50.3	537
78.4	538	(((
50.3	539	Different DLOS8N hardware version can support different frequency range:
78.4	540	)))
50.3	541
	542	* 868: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
	543	* 915: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
	544
78.4	545	(((
50.3	546	After user choose the frequency plan, he can see the actually frequency in used by checking the page LogRead ~-~-> LoRa Log
78.4	547	)))
50.3	548
73.5	549	[[image:1652423554776-574.png\|\|height="380" width="740"]]
50.3	550
80.10	551	Note : [[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]*
50.3	552
	553
	554	=== 5.2.2 LoRa ~-~-> ABP Decryption ===
	555
	556	The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
	557
	558	* No internet connection.
80.9	559	* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
50.3	560
78.4	561	(((
80.10	562	Detail of this feature: [[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]
78.4	563	)))
50.3	564
73.5	565	[[image:1652423628833-467.png\|\|height="357" width="755"]]
50.3	566
	567	== 5.3 LoRaWAN Settings ==
	568
	569	=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
	570
	571	This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
	572
73.5	573	[[image:1652423628833-467.png\|\|height="357" width="755"]]
50.3	574
	575	(% style="color:red" %)Note:
	576
	577	~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
	578
	579	~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
	580
80.10	581	See: [[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]
50.3	582
	583	=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
	584
73.5	585	[[image:1652428499323-384.png\|\|height="275" width="723"]]
50.3	586
78.4	587	(((
80.10	588	Please see this instruction to know more detail and demo for how to connect to [[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].
78.4	589	)))
50.3	590
	591	=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
	592
78.4	593	(((
50.3	594	Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
78.4	595	)))
50.3	596
78.4	597	(((
80.10	598	Instruction: [[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]
78.4	599	)))
50.3	600
73.5	601	[[image:1652428648903-878.png\|\|height="266" width="731"]]
50.3	602
	603	== 5.4 MQTT Settings ==
	604
	605	If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
	606
80.10	607	Instruction: [[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]
50.3	608
	609
73.5	610	[[image:1652428705046-212.png\|\|height="417" width="733"]]
50.3	611
	612	== 5.5 System ==
	613
	614	=== 5.5.1 System ~-~-> System Overview ===
	615
	616	Shows the system info:
	617
73.5	618	[[image:1652428773760-580.png\|\|height="408" width="728"]]
50.3	619
	620	=== 5.5.2 System ~-~-> General ( login settings) ===
	621
73.5	622	[[image:1652428861256-300.png\|\|height="354" width="724"]]
50.3	623
78.5	624	(((
54.2	625	__System Password:__
78.5	626	)))
50.3	627
78.5	628	(((
54.2	629	There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
78.5	630	)))
50.3	631
78.5	632	(((
50.3	633	This page can be used to set the password for them.
78.5	634	)))
50.3	635
54.2	636	(((
78.5	637	__Timezone:__Set device timezone.
	638	)))
50.3	639
54.2	640	(((
78.5	641	__Port forwarding:__Enable/Disable the HTTP and SSH access via WAN interface.
	642	)))
50.3	643
54.2	644	=== 5.5.3 System ~-~-> Network ===
50.3	645
73.5	646	[[image:1652429149053-824.png\|\|height="467" width="725"]]
50.3	647
78.5	648	(((
	649	__LAN Settings:__When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
	650	)))
50.3	651
54.2	652	(((
78.5	653	__WAN Settings:__Setting for DLOS8N WAN port
54.2	654	)))
50.3	655
54.2	656	(((
78.5	657	__WiFi Settings:__Setting for DLOS8N WiFi IP when use it as WiFi Client
80.4	658
	659
54.2	660	)))
50.3	661
54.2	662	=== 5.5.4 System ~-~-> WiFi ===
50.3	663
	664	DLOS8N WiFi Settings.
	665
73.5	666	[[image:1652429430767-921.png\|\|height="367" width="723"]]
50.3	667
54.2	668	=== 5.5.5 System ~-~-> Cellular ===
50.3	669
	670	While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
	671
73.5	672	[[image:1652429309615-825.png\|\|height="320" width="732"]]
50.3	673
54.2	674	(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
50.3	675
59.2	676	=== 5.5.6 System ~-~-> Network Status ===
50.3	677
73.5	678	[[image:1652429486609-208.png\|\|height="415" width="728"]]
50.3	679
59.2	680	=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
50.3	681
	682	Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
	683
73.5	684	[[image:1652429518191-846.png\|\|height="332" width="733"]]
50.3	685
73.5	686	[[image:1652429527544-247.png\|\|height="327" width="724"]]
50.3	687
73.5	688	[[image:1652429537849-154.png\|\|height="339" width="722"]]
50.3	689
	690	Please see this document for detail:
	691
80.4	692	(((
50.3	693	[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
80.4	694	)))
50.3	695
	696
80.10	697	R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]
50.3	698
73.5	699	[[image:1652429624400-864.png\|\|height="432" width="716"]]
50.3	700
80.10	701
66.2	702	=== 5.5.8 System ~-~-> Firmware Upgrade ===
50.3	703
	704	We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
	705
	706	* Latest firmware: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
	707
	708	( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
	709
	710	* Change Log: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
	711
	712	( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
	713
78.5	714	(((
66.2	715	The file named as (% style="color:green" %)xxxxx–xxxxx-squashfs-sysupgrade.bin (% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
78.5	716	)))
50.3	717
78.5	718	(((
66.2	719	(% style="color:green" %)Web~-~-> System~-~-> Firmware Upgrade
78.5	720	)))
50.3	721
73.5	722	[[image:1652429711145-862.png\|\|height="270" width="737"]]
50.3	723
	724	Select the required image and click Flash Image. The image will be uploaded to the device, and then click Process Update to upgrade.
	725
66.2	726	(% style="color:red" %)NOTE: (% style="color:black" %)You normally need to //uncheck// the Preserve Settings checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
50.3	727
	728	The system will automatically boot into the new firmware after upgrade.
	729
73.5	730	[[image:1652429962190-224.png\|\|height="358" width="729"]]
50.3	731
66.2	732	(% style="color:red" %)NOTE*(%%): User can also upgrade firmware via Linux console
50.3	733
66.2	734	SCP the firmware to the system(% style="color:green" %)/var(%%) directory and then run
50.3	735
66.2	736	(% style="color:#4f81bd" %)//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//
50.3	737
66.2	738	(% style="color:red" %)NOTE(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
50.3	739
66.2	740	=== 5.5.9 System ~-~-> Reboot/Reset ===
50.3	741
73.5	742	[[image:1652430197132-330.png\|\|height="256" width="724"]]
50.3	743
73.7	744	(((
	745
	746	)))
50.3	747
66.2	748	=== 5.5.10 System ~-~-> Package Maintain ===
50.3	749
73.5	750	[[image:1652430243826-126.png\|\|height="289" width="723"]]
50.3	751
	752	Place to show what package has installed and possible to upgrade packages.
	753
66.2	754	== 5.6 LogRead ==
50.3	755
66.2	756	=== 5.6.1 LogRead ~-~-> LoRa Log ===
50.3	757
	758
	759	Show the frequency for LoRa Radio and traffics.
	760
91.1	761	[[image:image-20220615204306-1.png\|\|height="575" width="733"]]
	762
	763
	764	Show the IoT Server Connection State and FWD State
	765
93.1	766	[[image:image-20220616083933-1.png\|\|height="556" width="729"]]
91.1	767
93.1	768	DLOS8 can view GPS location in the Logread FWD State
91.1	769
93.1	770
91.1	771	Show the Error logs, RxTxJson lorawan packages, and PULL State
	772
	773	[[image:image-20220615205416-6.png\|\|height="442" width="884"]]
	774
	775
66.2	776	=== 5.6.2 LogRead ~-~-> System Log ===
50.3	777
	778	Show the system log
	779
73.5	780	[[image:1652430369760-511.png\|\|height="373" width="730"]]
50.3	781
66.2	782	= 6. More features =
50.3	783
66.2	784	== 6.1 More instructions ==
50.3	785
80.12	786	[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
50.3	787
80.12	788
66.2	789	= 7. Linux System =
50.3	790
	791	The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
	792
66.2	793	== 7.1 SSH Access for Linux console ==
50.3	794
	795	User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
	796
	797	IP address: IP address of DLOS8N
	798
	799	Port: 22 (via WiFi AP mode) or 2222 (via WAN Interface)
	800
71.2	801	User Name: (% style="color:green" %)root
50.3	802
71.2	803	Password: (% style="color:green" %)dragino (% style="color:black" %)(default)
50.3	804
	805	After logging in, you will be in the Linux console and can enter commands as shown below.
	806
73.5	807	[[image:1652431588565-830.png]]
50.3	808
71.2	809	The “(% class="mark" %)logread -f(%%)” command can be used to debug how system runs.
50.3	810
73.5	811	[[image:1652431609193-637.png\|\|height="214" width="732"]]
71.2	812
80.13	813
67.3	814	== 7.2 Edit and Transfer files ==
50.3	815
78.5	816	(((
71.2	817	The DLOS8N supports the (% style="color:green" %)SCP protocol (% style="color:black" %)and has a built-in (% style="color:green" %)SFTP server. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
78.5	818	)))
50.3	819
78.5	820	(((
50.3	821	In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
78.5	822	)))
50.3	823
78.5	824	(((
50.3	825	After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
78.5	826	)))
50.3	827
78.5	828	(((
50.3	829	Screenshot is as below:
78.5	830	)))
50.3	831
73.5	832	[[image:1652431650755-450.png]]
50.3	833
	834
71.3	835	== 7.3 File System ==
	836
78.6	837	(((
50.3	838	The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
78.6	839	)))
50.3	840
78.6	841	(((
50.3	842	The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
78.6	843	)))
50.3	844
78.6	845	(((
50.3	846	You can use an external USB flash memory device to extend the size of flash memory for storage.
78.6	847	)))
50.3	848
71.6	849
71.3	850	== 7.4 Package maintenance system ==
50.3	851
71.3	852	DLOS8N uses the OpenWrt [[OPKG package maintenance system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the //iperf // tool, you can install the related packages and configure DLOS8N to use //iperf //.
50.3	853
78.6	854	(((
71.3	855	Below are some example //opkg // commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]] ([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
78.6	856	)))
50.3	857
78.6	858	(((
71.6	859	In Linux Console run:
78.6	860	)))
50.3	861
71.6	862	(((
71.7	863	(% style="color:green" %)root@dragino-169d30:~~# opkg update (% style="color:black" %)~/~/ to get the latest packages list
71.6	864	)))
50.3	865
71.6	866	(((
	867	(% style="color:green" %)root@dragino-169d30:~~# opkg list (% style="color:black" %) ~/~/shows the available packages
	868	)))
50.3	869
71.6	870	(((
	871	(% style="color:green" %)root@dragino-169d30:~~# opkg install iperf (% style="color:black" %)~/~/ install iperf
	872	)))
50.3	873
	874	The system will automatically install the required packages as shown below.
	875
	876
71.6	877	(((
71.7	878	(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
71.6	879	)))
50.3	880
71.6	881	(((
71.7	882	(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
71.6	883	)))
50.3	884
71.6	885	(((
73.3	886	(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
71.6	887	)))
50.3	888
71.6	889	(((
71.7	890	(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
71.6	891	)))
50.3	892
71.6	893	(((
73.3	894	(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
71.6	895	)))
50.3	896
71.6	897	(((
71.7	898	(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
71.6	899	)))
50.3	900
71.6	901	(((
71.7	902	(% style="background-color:#dcdcdc" %)//Configuring iperf.//
71.6	903	)))
50.3	904
73.2	905	= 8. Upgrade Linux Firmware =
50.3	906
71.7	907
73.2	908	= 9. FAQ =
	909
71.6	910	== 9.1 How can I configure for a customized frequency band? ==
50.3	911
78.6	912	(((
80.10	913	See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
78.6	914	)))
50.3	915
78.6	916	(((
80.10	917
78.6	918	)))
50.3	919
71.6	920	== 9.2 Can I connect DLOS8N to LORIOT? ==
50.3	921
80.10	922	Yes, the set up instruction is here: [[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]
50.3	923
73.2	924
71.6	925	== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
50.3	926
78.6	927	(((
50.3	928	Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
78.6	929	)))
50.3	930
78.6	931	(((
50.3	932	The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
78.6	933	)))
50.3	934
73.2	935
71.6	936	== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
50.3	937
	938	It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
	939
71.7	940
73.2	941	= 10. Trouble Shooting =
	942
71.6	943	== 10.1 I get kernel error when install new package, how to fix? ==
50.3	944
	945	In some cases, when installing a package with //opkg//, it will generate a kernel error such as below due to a mismatch I the kernel ID:
	946
73.3	947	(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
50.3	948
73.5	949	(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
50.3	950
73.3	951	(% style="background-color:yellow" %)Collected errors:
50.3	952
73.3	953	(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
50.3	954
73.3	955	(% style="background-color:yellow" %)* kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
50.3	956
73.3	957	(% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
50.3	958
78.6	959	(((
50.3	960	In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
78.6	961	)))
50.3	962
73.3	963	(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
50.3	964
73.2	965
71.6	966	== 10.2 How to recover the DLOS8N if the firmware crashes ==
50.3	967
78.6	968	(((
80.11	969	Please follow this instruction to recover your gateway: [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
78.6	970	)))
50.3	971
78.6	972	(((
80.11	973
78.6	974	)))
50.3	975
71.6	976	== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
50.3	977
73.5	978	[[image:1652435238615-272.png\|\|height="247" width="727"]]
50.3	979
78.6	980	(((
50.3	981	The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
78.6	982	)))
50.3	983
73.5	984	(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
50.3	985
	986
	987	Steps to connect via fall back IP:
	988
73.2	989	~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
	990
	991	2. Configure PC’s Ethernet port has
73.5	992	IP: 172.31.255.253 and
	993	Netmask: 255.255.255.252
50.3	994
	995	As below photo:
	996
73.5	997	[[image:1652435256286-879.png]]
50.3	998
73.2	999	3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
50.3	1000
	1001	Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
	1002
73.5	1003
71.7	1004	= 11. Order Info =
50.3	1005
73.6	1006	(% style="color:#4f81bd" %) //PART: DLOS8N-XXX-YYY//:
50.3	1007
73.6	1008	(% style="color:#4f81bd" %) //XXX: Frequency Band//
50.3	1009
73.6	1010	* (% style="color:#4f81bd" %) 868(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
	1011	* (% style="color:#4f81bd" %) 915(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
50.3	1012
73.6	1013	(% style="color:#4f81bd" %) //YYY: 4G Cellular Option//
50.3	1014
73.6	1015	* (% style="color:#4f81bd" %) E(% style="color:black" %): EMEA, Korea, Thailand, India.
	1016	* (% style="color:#4f81bd" %) A(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
	1017	* (% style="color:#4f81bd" %) AU(% style="color:black" %): Latin America, New Zeland, Taiwan
	1018	* (% style="color:#4f81bd" %) J(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
50.3	1019
	1020	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
	1021
73.6	1022
71.7	1023	= 12. Packing Info =
50.3	1024
78.6	1025	(((
50.3	1026	Package Includes:
78.6	1027	)))
50.3	1028
	1029	* DLOS8N LoRaWAN Gateway x 1
	1030	* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
	1031	* Packaging with environmental protection paper box
	1032
78.6	1033	(((
50.3	1034	Dimension and weight:
78.6	1035	)))
50.3	1036
	1037	* Device Size: 12 x 12 x 3 cm
	1038	* Weight: 187g
	1039	* Package Size: 14.5 x 13.5 x 6 cm
	1040	* Weight: 300g
	1041
71.7	1042	= 13. Support =
50.3	1043
80.15	1044	* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
50.3	1045	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
	1046	Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
71.7	1047	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]

Wiki source code of LPS8N - LoRaWAN Gateway User Manual

Applications