Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 97.2 >
edited by Xiaoling
on 2022/07/06 11:44
To version < 143.3 >
edited by Xiaoling
on 2022/07/07 09:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -60,8 +60,6 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -
64 -
65 65  (% style="color:#037691" %)**Interface:**
66 66  
67 67  * 10M/100M RJ45 Ports x 1
... ... @@ -72,8 +72,6 @@
72 72  * Mini-PCI E connector x 1
73 73  * SX1302 + 2 x SX1250
74 74  
75 -
76 -
77 77  (% style="color:#037691" %)**WiFi Spec:**
78 78  
79 79  * IEEE 802.11 b/g/n
... ... @@ -87,8 +87,6 @@
87 87  ** 11g 54M : -71dbm
88 88  ** 11n 20M : -67dbm
89 89  
90 -
91 -
92 92  (% style="color:#037691" %)**LoRa Spec:**
93 93  
94 94  * Up to -140 dBm sensitivity
... ... @@ -100,8 +100,6 @@
100 100  * Dynamic data-rate (DDR) adaptation
101 101  * True antenna diversity or simultaneous dual-band operation
102 102  
103 -
104 -
105 105  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
106 106  
107 107  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -113,10 +113,8 @@
113 113  
114 114  
115 115  
116 -
117 117  == 1.3  Features ==
118 118  
119 -
120 120  * Open Source OpenWrt system
121 121  * Managed by Web GUI, SSH via WAN or WiFi
122 122  * Remote access with Reverse-SSH or remote.it
... ... @@ -133,7 +133,6 @@
133 133  
134 134  
135 135  
136 -
137 137  == 1.4  Hardware System Structure ==
138 138  
139 139  [[image:1657079015096-949.png]]
... ... @@ -146,77 +146,78 @@
146 146  
147 147  == 1.6  LED Indicators ==
148 148  
149 -[[image:1652411720670-489.png]]
150 150  
139 +LPS8N has totally four LEDs, They are:
151 151  
152 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
141 +* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
142 +* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
143 +* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
144 +** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
145 +** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
146 +** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
153 153  
154 -(((
155 -(((
156 -* (((
157 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
158 -)))
159 -)))
148 +* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
160 160  
161 -* (((
162 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
163 -)))
164 -* (((
165 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
166 -)))
167 -)))
168 168  
169 -== 1.7 WiFi Direction ==
170 170  
171 -DLOS8N use directional WiFi Antenna. The best direction is as below:
152 += 2.  Access and Configure LPS8N =
172 172  
173 -[[image:1652412859663-161.png||height="341" width="333"]]
154 +(((
155 +The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
156 +)))
174 174  
175 -= 2. Access and Configure DLOS8N =
176 176  
177 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
159 +== 2.1  Find IP address of LPS8N ==
178 178  
179 -== 2.1 Find IP address of DLOS8N ==
161 +=== 2.1.1  Connect via WiFi ===
180 180  
181 -=== 2.1.1 Connect via WiFi ===
163 +[[image:1657085974260-168.png]]
182 182  
183 -[[image:1652412985720-934.png]]
184 184  
185 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
166 +At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
186 186  
187 187  [[image:1652413127647-377.png]]
188 188  
189 -(% style="background-color:#ffffcc" %)dragino+dragino
190 190  
191 191  (((
192 192  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
173 +
174 +
175 +
193 193  )))
194 194  
195 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
178 +=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
196 196  
197 -[[image:1652414114583-532.png]]
180 +[[image:1657086105922-299.png]]
198 198  
199 199  
200 200  (((
201 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
184 +Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
185 +
186 +
187 +
202 202  )))
203 203  
204 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
190 +=== 2.1.3  Connect via WiFi with DHCP IP from router ===
205 205  
206 -[[image:1652414137639-956.png]]
192 +[[image:1657086192720-649.png]]
207 207  
208 208  
209 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
195 +If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
210 210  
211 -=== 2.1.4 Connect via Ethernet with fall back ip ===
212 212  
213 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
214 214  
215 -== 2.2 Access Configure Web UI ==
199 +=== 2.1.4  Connect via Ethernet with fall back ip ===
216 216  
201 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
202 +
203 +
204 +
205 +== 2.2  Access Configure Web UI ==
206 +
217 217  **Web Interface**
218 218  
219 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
209 +Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
220 220  
221 221  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
222 222  
... ... @@ -225,7 +225,7 @@
225 225  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
226 226  
227 227  
228 -You will see the login interface of DLOS8N as shown below.
218 +You will see the login interface of LPS8N as shown below.
229 229  
230 230  The account details for Web Login are:
231 231  
... ... @@ -235,50 +235,67 @@
235 235  
236 236  [[image:1652414287022-223.png]]
237 237  
238 -= 3. Typical Network Setup =
239 239  
240 -== 3.1 Overview ==
241 241  
242 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 += 3.  Typical Network Setup =
243 243  
232 +== 3.1  Overview ==
233 +
234 +The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
235 +
244 244  * **WAN Port Internet Mode**
245 245  * **WiFi Client Mode**
246 246  * **WiFi AP Mode**
247 -* **Cellular Mode**
248 248  
249 -== 3.2 Use WAN port to access Internet ==
250 250  
251 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
252 252  
253 -[[image:1652420169255-959.png]]
242 +== 3.2  Use WAN port to access Internet ==
254 254  
255 -== 3.3 Access the Internet as a WiFi Client ==
244 +By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
256 256  
246 +
247 +[[image:1657088560833-398.png]]
248 +
249 +
250 +== 3.3  Access the Internet as a WiFi Client ==
251 +
257 257  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
258 258  
259 259  (((
260 260  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
256 +
257 +[[image:1657088818095-182.png]]
261 261  )))
262 262  
263 -[[image:1652420327792-211.png]]
264 264  
265 265  (((
266 266  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
263 +
264 +
267 267  )))
268 268  
269 -== 3.4 Access the Internet via Cellular ==
267 +== 3.4  Use built-in 4G modem for internet access ==
270 270  
271 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
269 +(((
270 +(((
271 +If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
272 +)))
272 272  
274 +
273 273  (((
274 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
276 +First, install the Micro SIM card as below direction
275 275  )))
276 276  
277 -[[image:1652420606018-181.png]]
279 +(((
280 +Second, Power off/ ON LPS8N to let it detect the SIM card.
281 +)))
282 +)))
278 278  
279 279  
285 +[[image:1657090855037-497.png]]
286 +
280 280  (((
281 -[[image:1652420718132-929.png||height="427" width="727"]]
288 +
282 282  )))
283 283  
284 284  (((
... ... @@ -290,78 +290,90 @@
290 290  )))
291 291  
292 292  (((
293 -[[image:1652421032117-341.png||height="329" width="752"]]
300 +[[image:1657090932270-444.png]]
294 294  )))
295 295  
296 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
297 297  
298 -== 3.5 Check Internet connection ==
304 +== 3.5  Check Internet connection ==
299 299  
300 300  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
301 301  
302 302  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
303 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
304 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
309 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
310 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
305 305  
306 -[[image:1652421351382-793.png||height="339" width="765"]]
312 +[[image:1657091099235-452.png]]
307 307  
308 -= 4. Example: Configure as a LoRaWAN gateway =
309 309  
310 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
311 311  
316 += 4.  Example: Configure as a LoRaWAN gateway =
317 +
318 +LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
319 +
312 312  (((
313 -[[image:image-20220513140429-1.png||height="565" width="824"]]
321 +[[image:1657091257648-882.png]]
314 314  )))
315 315  
316 -This chapter describes how to use the DLOS8Nto work with
324 +(((
325 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 +)))
317 317  
318 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
319 319  
320 -== 4.1 Create a gateway in TTN V3 Server ==
321 321  
330 +== 4.1  Create a gateway in TTN V3 Server ==
331 +
322 322  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
323 323  
324 324  (((
325 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 +Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
326 326  )))
327 327  
328 328  (((
329 -[[image:1652421929753-168.png||height="403" width="739"]]
339 +[[image:1657091583941-544.png]]
330 330  )))
331 331  
332 -The example gateway id is: **a840411e96744154**
342 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
333 333  
344 +
334 334  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
335 335  
336 336  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
337 337  
338 -[[image:1652422127479-258.png||height="346" width="738"]]
349 +[[image:1657091739530-531.png]]
339 339  
351 +
340 340  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
341 341  
342 342  (((
343 -[[image:1652422142236-792.png||height="356" width="737"]]
355 +[[image:1657091719947-297.png]]
344 344  )))
345 345  
346 346  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
347 347  
348 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
349 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
350 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
351 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
352 352  
361 +* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
362 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
363 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 +
366 +
367 +
353 353  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
354 354  
355 -[[image:1652422440891-514.png||height="360" width="747"]]
370 +[[image:1657091941182-367.png]]
356 356  
357 357  Click the Gateway icon and then click Add gateway.
358 358  
374 +
359 359  Open the following page:
360 360  
361 - [[image:1652422470352-518.png||height="391" width="716"]]
362 362  
363 -[[image:1652422479876-297.png||height="398" width="729"]]
378 + [[image:image-20220706155323-5.png||height="579" width="1060"]]
364 364  
380 +
381 +[[image:image-20220706155323-6.png||height="582" width="1066"]]
382 +
383 +
365 365  (((
366 366  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
367 367  )))
... ... @@ -368,16 +368,17 @@
368 368  
369 369  After creating the gateway, you can see the gateway info, as below.
370 370  
371 -[[image:1652422509034-682.png||height="299" width="739"]]
390 +[[image:1657094130908-567.png]](% style="display:none" %)
372 372  
373 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
374 374  
393 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
394 +
375 375  (((
376 -You can now configure the DLOS8N to let it connect to TTN network V3.
396 +You can now configure the LPS8N to let it connect to TTN network V3.
377 377  )))
378 378  
379 379  (((
380 -Make sure your DLOS8N has a working Internet Connection first.
400 +Make sure your LPS8N has a working Internet Connection first.
381 381  )))
382 382  
383 383  (((
... ... @@ -384,31 +384,35 @@
384 384  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
385 385  )))
386 386  
387 -[[image:1652422624783-580.png||height="327" width="729"]]
407 +[[image:1657094183213-301.png]]
388 388  
389 389  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
390 390  
411 +
391 391  In the home page, we can see the LoRaWAN connection is ready now.
392 392  
393 -[[image:1652422685063-596.png||height="327" width="729"]]
414 +[[image:1657094202420-798.png]]
394 394  
416 +
395 395  In TTN v3 portal, we can also see the gateway is connected.
396 396  
397 -[[image:1652422703020-955.png||height="343" width="730"]]
419 +[[image:1657094221515-510.png]]
398 398  
399 -== 4.3 Configure frequency ==
400 400  
401 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
422 +== 4.3  Configure frequency ==
402 402  
403 -[[image:1652422737399-529.png||height="362" width="737"]]
424 +We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
404 404  
426 +[[image:1657094249818-468.png]]
405 405  
428 +
406 406  In logread page, user can check the frequency actually used.
407 407  
408 - [[image:1652422763536-750.png||height="514" width="730"]]
431 + [[image:1657094333704-207.png]]
409 409  
410 -== 4.4 Add a LoRaWAN End Device ==
411 411  
434 +== 4.4  Add a LoRaWAN End Device ==
435 +
412 412  (((
413 413  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
414 414  )))
... ... @@ -421,6 +421,8 @@
421 421  
422 422  (((
423 423  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
448 +
449 +
424 424  )))
425 425  
426 426  (((
... ... @@ -435,10 +435,12 @@
435 435  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
436 436  )))
437 437  
438 -[[image:1652422840936-838.png]]
464 +[[image:1657094382177-591.png]]
439 439  
440 440  (((
441 441  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
468 +
469 +
442 442  )))
443 443  
444 444  (((
... ... @@ -449,16 +449,19 @@
449 449  Select **Add Application** to open the screen below.
450 450  )))
451 451  
452 -[[image:1652422946999-255.png||height="356" width="744"]]
480 +[[image:1657094417175-831.png]]
453 453  
454 454  Open the **Application **select** Add end device**
455 455  
484 +
456 456  Start Register the end device
457 457  
458 -[[image:1652422975885-591.png||height="359" width="726"]]
487 +[[image:1657094444802-101.png]]
459 459  
460 460  (((
461 461  Select OTAA activation mode
491 +
492 +
462 462  )))
463 463  
464 464  (((
... ... @@ -465,18 +465,22 @@
465 465  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
466 466  )))
467 467  
468 -[[image:1652422998005-968.png||height="352" width="744"]]
499 +[[image:1657094475730-208.png]]
469 469  
470 470  First, input the End device ID, AppEUI and DevEUI.
471 471  
472 -[[image:1652423022781-339.png||height="365" width="741"]]
473 473  
504 +[[image:1657094646429-966.png]]
505 +
474 474  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
475 475  
476 -[[image:1652423046741-467.png||height="355" width="736"]]
477 477  
509 +[[image:1657094674045-755.png]]
510 +
478 478  (((
479 479  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
513 +
514 +
480 480  )))
481 481  
482 482  (((
... ... @@ -487,36 +487,40 @@
487 487  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
488 488  )))
489 489  
490 -[[image:1652423277549-324.png||height="273" width="745"]]
525 +[[image:1657094791060-639.png]]
491 491  
492 -= 5. Web Configure Pages =
493 493  
494 -== 5.1 Home ==
528 += 5.  Web Configure Pages =
495 495  
530 +== 5.1  Home ==
531 +
496 496  Shows the system running status.
497 497  
498 -[[image:1652423418568-752.png||height="329" width="724"]]
534 +[[image:1657094893942-726.png]]
499 499  
500 -== 5.2 LoRa Settings ==
501 501  
502 -=== 5.2.1 LoRa ~-~-> LoRa ===
537 +== 5.2  LoRa Settings ==
503 503  
539 +=== 5.2.1  LoRa ~-~-> LoRa ===
540 +
504 504  (((
505 505  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
506 506  )))
507 507  
508 508  (((
509 -Different DLOS8N hardware version can support different frequency range:
546 +Different LPS8N hardware version can support different frequency range:
510 510  )))
511 511  
512 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
513 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
549 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
550 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
514 514  
515 515  (((
516 -After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
553 +
554 +
555 +After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
517 517  )))
518 518  
519 -[[image:1652423554776-574.png||height="380" width="740"]]
558 +[[image:1657094930903-357.png]]
520 520  
521 521  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
522 522  
... ... @@ -523,7 +523,7 @@
523 523  
524 524  === 5.2.2 LoRa ~-~-> ABP Decryption ===
525 525  
526 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
565 +The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
527 527  
528 528  * No internet connection.
529 529  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -532,12 +532,13 @@
532 532  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
533 533  )))
534 534  
535 -[[image:1652423628833-467.png||height="357" width="755"]]
574 +[[image:1657095412271-942.png]]
536 536  
537 -== 5.3 LoRaWAN Settings ==
538 538  
539 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
577 +== 5.3  LoRaWAN Settings ==
540 540  
579 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
580 +
541 541  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
542 542  
543 543  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -544,21 +544,24 @@
544 544  
545 545  (% style="color:red" %)**Note:**
546 546  
547 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
587 +~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
548 548  
549 549  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
550 550  
551 551  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
552 552  
553 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
554 554  
594 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
595 +
555 555  [[image:1652428499323-384.png||height="275" width="723"]]
556 556  
557 557  (((
558 558  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
600 +
601 +
559 559  )))
560 560  
561 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
604 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
562 562  
563 563  (((
564 564  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -570,33 +570,37 @@
570 570  
571 571  [[image:1652428648903-878.png||height="266" width="731"]]
572 572  
573 -== 5.4 MQTT Settings ==
574 574  
575 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
617 +== 5.4  MQTT Settings ==
576 576  
619 +If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
620 +
577 577  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
578 578  
579 579  
580 580  [[image:1652428705046-212.png||height="417" width="733"]]
581 581  
582 -== 5.5 System ==
583 583  
584 -=== 5.5.1 System ~-~-> System Overview ===
627 +== 5.5  System ==
585 585  
629 +=== 5.5.1  System ~-~-> System Overview ===
630 +
586 586  Shows the system info:
587 587  
588 -[[image:1652428773760-580.png||height="408" width="728"]]
633 +[[image:1657155158184-134.png]]
589 589  
590 -=== 5.5.2 System ~-~-> General ( login settings) ===
591 591  
592 -[[image:1652428861256-300.png||height="354" width="724"]]
593 593  
637 +=== 5.5.2  System ~-~-> General ( login settings) ===
638 +
639 +[[image:1657155183982-792.png]]
640 +
594 594  (((
595 595  **__System Password:__**
596 596  )))
597 597  
598 598  (((
599 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
646 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
600 600  )))
601 601  
602 602  (((
... ... @@ -604,51 +604,63 @@
604 604  )))
605 605  
606 606  (((
607 -**__Timezone:__**Set device timezone.
654 +**__Timezone:  __**Set device timezone.
608 608  )))
609 609  
610 610  (((
611 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
658 +**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
659 +
660 +
661 +
612 612  )))
613 613  
614 -=== 5.5.3 System ~-~-> Network ===
664 +=== 5.5.3  System ~-~-> Network ===
615 615  
616 -[[image:1652429149053-824.png||height="467" width="725"]]
666 +[[image:1657155288223-566.png]]
617 617  
618 618  (((
619 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
669 +**__LAN Settings:  __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
620 620  )))
621 621  
622 622  (((
623 -__**WAN Settings:**__Setting for DLOS8N WAN port
673 +__**WAN Settings:  **__Setting for LPS8N WAN port
624 624  )))
625 625  
626 626  (((
627 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
677 +__**WiFi Settings:  **__Setting for LPS8N WiFi IP when use it as WiFi Client
628 628  
679 +
629 629  
630 630  )))
631 631  
632 -=== 5.5.4 System ~-~-> WiFi ===
683 +=== 5.5.4  System ~-~-> WiFi ===
633 633  
634 -DLOS8N WiFi Settings.
685 +LPS8N WiFi Settings.
635 635  
636 -[[image:1652429430767-921.png||height="367" width="723"]]
687 +[[image:1657155457089-430.png]]
637 637  
638 -=== 5.5.5 System ~-~-> Cellular ===
639 639  
690 +
691 +=== 5.5.5  System ~-~-> Cellular ===
692 +
640 640  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
641 641  
642 -[[image:1652429309615-825.png||height="320" width="732"]]
643 643  
644 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
696 +[[image:1657155507672-204.png]]
645 645  
646 -=== 5.5.6 System ~-~-> Network Status ===
698 +(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
647 647  
648 -[[image:1652429486609-208.png||height="415" width="728"]]
649 649  
650 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
651 651  
702 +=== 5.5.6  System ~-~-> Network Status ===
703 +
704 +
705 +[[image:1657155554265-721.png]]
706 +
707 +
708 +
709 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
710 +
652 652  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
653 653  
654 654  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -669,18 +669,20 @@
669 669  [[image:1652429624400-864.png||height="432" width="716"]]
670 670  
671 671  
672 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
673 673  
674 -We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
732 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
675 675  
734 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
735 +
676 676  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
677 677  
678 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
738 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
679 679  
680 680  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
681 681  
682 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
742 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
683 683  
744 +
684 684  (((
685 685  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
686 686  )))
... ... @@ -689,15 +689,16 @@
689 689  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
690 690  )))
691 691  
692 -[[image:1652429711145-862.png||height="270" width="737"]]
753 +[[image:1657156052651-770.png]]
693 693  
694 694  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
695 695  
757 +
696 696  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
697 697  
698 698  The system will automatically boot into the new firmware after upgrade.
699 699  
700 -[[image:1652429962190-224.png||height="358" width="729"]]
762 +[[image:1657156094153-520.png]]
701 701  
702 702  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
703 703  
... ... @@ -705,8 +705,10 @@
705 705  
706 706  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
707 707  
770 +
708 708  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
709 709  
773 +
710 710  === 5.5.9 System ~-~-> Reboot/Reset ===
711 711  
712 712  [[image:1652430197132-330.png||height="256" width="724"]]
1657085974260-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0