Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 9.1 >
edited by Xiaoling
on 2022/05/13 11:38
To version < 73.5 >
edited by Xiaoling
on 2022/05/13 17:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,15 +19,15 @@
19 19  
20 20  == 1.1 What is the DLOS8N ==
21 21  
22 -The DLOS8N is (% class="mark" %)an open source outdoor LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  
24 -DLOS8N (% class="mark" %)supports Semtech packet forwarder(%%) and (% class="mark" %)LoRaWAN Station connection(%%), it is fully compatible with LoRaWAN protocol. DLOS8N includes a(% class="mark" %) SX1302 LoRaWAN concentrator(%%).
24 +DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
25 25  
26 -DLOS8N has (% class="mark" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
26 +DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
27 27  
28 28  DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
29 29  
30 -DLOS8N supports (% class="mark" %)auto-provision(%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
30 +DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
31 31  
32 32  [[image:1652411526195-923.png]]
33 33  
... ... @@ -159,56 +159,45 @@
159 159  
160 160  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
161 161  
162 +== 2.1 Find IP address of DLOS8N ==
162 162  
163 -1.
164 -11. Find IP address of DLOS8N
165 -111. Connect via WiFi
164 +=== 2.1.1 Connect via WiFi ===
166 166  
167 167  [[image:1652412985720-934.png]]
168 168  
169 169  
170 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]] At the first boot of DLOS8N, it will auto generate a WiFi network called **//dragino-xxxxxx //**with password:
169 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
171 171  
171 +[[image:1652413127647-377.png]]
172 172  
173 -dragino+dragino
173 +(% style="background-color:#ffffcc" %)dragino+dragino
174 174  
175 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
175 175  
176 176  
177 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP 10.130.1.1
178 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
178 178  
180 +[[image:1652414114583-532.png]]
179 179  
180 180  
181 -1.
182 -11.
183 -111. Connect via Ethernet with DHCP IP from router
184 -
185 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
186 -
187 -
188 188  Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
189 189  
190 190  
191 -1.
192 -11.
193 -111. Connect via WiFi with DHCP IP from router
186 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
194 194  
195 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
188 +[[image:1652414137639-956.png]]
196 196  
197 197  
198 198  If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
199 199  
200 -1.
201 -11.
202 -111. Connect via Ethernet with fall back ip
203 203  
194 +=== 2.1.4 Connect via Ethernet with fall back ip ===
195 +
204 204  The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
205 205  
206 206  
199 +== 2.2 Access Configure Web UI ==
207 207  
208 -
209 -1.
210 -11. Access Configure Web UI
211 -
212 212  **Web Interface**
213 213  
214 214  Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
... ... @@ -224,18 +224,18 @@
224 224  
225 225  The account details for Web Login are:
226 226  
227 -**User Name: root**
216 +(% style="color:#4f81bd" %)**User Name: root**
228 228  
229 -**Password:   dragino**
218 +(% style="color:#4f81bd" %)**Password:   dragino**
230 230  
231 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
220 +[[image:1652414287022-223.png]]
232 232  
233 233  
234 234  
235 235  
225 += 3. Typical Network Setup =
236 236  
237 -1. Typical Network Setup
238 -11. Overview
227 +== 3.1 Overview ==
239 239  
240 240  The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
241 241  
... ... @@ -244,33 +244,26 @@
244 244  * **WiFi AP Mode**
245 245  * **Cellular Mode**
246 246  
247 -1.
248 -11. Use WAN port to access Internet
236 +== 3.2 Use WAN port to access Internet ==
249 249  
250 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the **home page**:
238 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
251 251  
240 +[[image:1652420169255-959.png]]
252 252  
253 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
254 254  
243 +== 3.3 Access the Internet as a WiFi Client ==
255 255  
256 -
257 -
258 -1.
259 -11. Access the Internet as a WiFi Client.
260 -
261 261  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
262 262  
247 +The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
263 263  
264 -The settings for WiFi Client is under page **System à WiFi ** **à WiFi WAN Client Settings**
249 +[[image:1652420327792-211.png]]
265 265  
266 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
267 267  
268 -
269 269  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
270 270  
271 271  
272 -1.
273 -11. Access the Internet via Cellular
255 +== 3.4 Access the Internet via Cellular ==
274 274  
275 275  If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
276 276  
... ... @@ -277,169 +277,136 @@
277 277  
278 278  First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
279 279  
280 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
262 +[[image:1652420606018-181.png]]
281 281  
282 282  
283 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
265 +[[image:1652420718132-929.png||height="450" width="766"]]
284 284  
285 285  
286 -The set up page is **System à Cellular**
268 +The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
287 287  
288 288  
289 289  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
290 290  
291 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
273 +[[image:1652421032117-341.png||height="329" width="752"]]
292 292  
293 -**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
275 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
294 294  
295 295  
296 -1.
297 -11. Check Internet connection
278 +== 3.5 Check Internet connection ==
298 298  
299 -In the **Home** page, we can check the Internet connection.
280 +In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
300 300  
301 -* GREEN Tick  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]] : This interface has Internet connection.
302 -* Yellow Tick [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]] : This interface has IP address but don’t use it for internet connection.
303 -* RED Cross [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]] : This interface doesn’t connected.
282 +* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 +* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 +* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
304 304  
305 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
286 +[[image:1652421351382-793.png||height="339" width="765"]]
306 306  
307 307  
289 += 4. Example: Configure as a LoRaWAN gateway =
308 308  
309 -
310 -
311 -1. Example: Configure as a LoRaWAN gateway
312 -
313 313  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
314 314  
293 +[[image:image-20220513140429-1.png||height="565" width="824"]]
315 315  
316 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
317 -
318 -
319 319  This chapter describes how to use the DLOS8Nto work with
320 320  
321 321  [[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
322 322  
323 323  
300 +== 4.1 Create a gateway in TTN V3 Server ==
324 324  
302 +(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
325 325  
326 -1.
327 -11. Create a gateway in TTN V3 Server
328 -
329 -**Step 1: Get a Unique gateway ID.**
330 -
331 331  Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
332 332  
306 +[[image:1652421929753-168.png||height="403" width="739"]]
333 333  
334 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
308 +The example gateway id is: a840411e96744154
335 335  
336 336  
337 -The example gateway id is: **a840411e96744154**
311 +(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
338 338  
339 -
340 -**Step 2: Sign up a user account in TTN server**
341 -
342 342  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
343 343  
344 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
315 +[[image:1652422127479-258.png||height="346" width="738"]]
345 345  
346 346  
318 +(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
347 347  
320 +[[image:1652422142236-792.png||height="356" width="737"]]
348 348  
349 349  
323 +(% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
350 350  
325 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
326 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
327 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
328 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
351 351  
352 -**Step 3: Choose the TTNv3 Cluster Picker**
330 +(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
353 353  
354 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
332 +[[image:1652422440891-514.png||height="360" width="747"]]
355 355  
356 -
357 -**Note: Choose the cluster corresponds to a specific Gateway server address**
358 -
359 -* Europe 1 **corresponding Gateway server address: **eu1.cloud.thethings.network
360 -* North America 1 **corresponding Gateway server address:** nam1.cloud.thethings.network
361 -* Australia 1 **corresponding Gateway server address:** au1.cloud.thethings.network
362 -* Legacy V2 Console : **TTN v2 shuts down in December 2021**
363 -
364 -**Step 4: Create a Gateway**
365 -
366 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
367 -
368 368  Click the Gateway icon and then click Add gateway.
369 369  
370 370  Open the following page:
371 371  
372 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
338 + [[image:1652422470352-518.png||height="391" width="716"]]
373 373  
374 -**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
340 +[[image:1652422479876-297.png||height="398" width="729"]]
375 375  
342 +(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
376 376  
377 -
378 378  After creating the gateway, you can see the gateway info, as below.
379 379  
380 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
346 +[[image:1652422509034-682.png||height="299" width="739"]]
381 381  
382 382  
383 -1.
384 -11. Configure DLOS8N to connect to TTN v3
349 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
385 385  
386 386  You can now configure the DLOS8N to let it connect to TTN network V3.
387 387  
388 388  Make sure your DLOS8N has a working Internet Connection first.
389 389  
355 +Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
390 390  
391 -Choose the right server provider and click **Save&Apply**
357 +[[image:1652422624783-580.png||height="327" width="729"]]
392 392  
393 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
359 +(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
394 394  
395 -
396 -
397 -**Note: **The server address must match the Gateway server address you choose in TTN V3.
398 -
399 -
400 400  In the home page, we can see the LoRaWAN connection is ready now.
401 401  
363 +[[image:1652422685063-596.png||height="327" width="729"]]
402 402  
403 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
404 -
405 -
406 -
407 407  In TTN v3 portal, we can also see the gateway is connected.
408 408  
409 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
367 +[[image:1652422703020-955.png||height="343" width="730"]]
410 410  
411 411  
370 +== 4.3 Configure frequency ==
412 412  
413 -
414 -1.
415 -11. Configure frequency
416 -
417 417  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
418 418  
419 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
374 +[[image:1652422737399-529.png||height="362" width="737"]]
420 420  
421 421  
422 422  In logread page, user can check the frequency actually used.
423 423  
424 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]
379 + [[image:1652422763536-750.png||height="514" width="730"]]
425 425  
426 426  
382 +4.4 Add a LoRaWAN End Device
427 427  
428 -
429 -1.
430 -11. Add a LoRaWAN End Device
431 -
432 432  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
433 433  
434 -
435 435  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
436 436  
388 +[[image:1652422794767-871.png]]
437 437  
438 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
390 +(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
439 439  
440 -**Step 1**: Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
441 -
442 -
443 443  Three codes are required to define the device in TTN v3:
444 444  
445 445  * DEV EUI - Unique ID code for a particular device.
... ... @@ -448,26 +448,22 @@
448 448  
449 449  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
450 450  
400 +[[image:1652422840936-838.png]]
451 451  
452 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]
453 453  
403 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
454 454  
455 -Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
456 -
457 -
458 458  For the TTN v3 server, you can use the codes set in the device as in the following example.
459 459  
460 -
461 461  Select **Add Application** to open the screen below.
462 462  
463 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
409 +[[image:1652422946999-255.png||height="356" width="744"]]
464 464  
465 465  Open the **Application **select** Add end device**
466 466  
467 -
468 468  Start Register the end device
469 469  
470 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]
415 +[[image:1652422975885-591.png||height="359" width="726"]]
471 471  
472 472  Select OTAA activation mode
473 473  
... ... @@ -474,52 +474,41 @@
474 474  
475 475  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
476 476  
477 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]
422 +[[image:1652422998005-968.png||height="352" width="744"]]
478 478  
479 479  First, input the End device ID, AppEUI and DevEUI.
480 480  
426 +[[image:1652423022781-339.png||height="365" width="741"]]
481 481  
482 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]
483 -
484 484  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
485 485  
430 +[[image:1652423046741-467.png||height="355" width="736"]]
486 486  
487 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.png]]
488 -
489 489  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
490 490  
491 491  
492 -**Step 2**: Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
435 +(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
493 493  
437 +(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
494 494  
495 -Note that it may take some time for the device data to appear in the TTN v3 display.
439 +[[image:1652423277549-324.png||height="273" width="745"]]
496 496  
497 497  
498 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image041.png]]
442 += 5. Web Configure Pages =
499 499  
444 +== 5.1 Home ==
500 500  
501 -
502 -
503 -
504 -1. Web Configure Pages
505 -
506 -1.
507 -11. Home
508 -
509 509  Shows the system running status.
510 510  
511 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image042.png]]
448 +[[image:1652423418568-752.png||height="329" width="724"]]
512 512  
513 513  
451 +== 5.2 LoRa Settings ==
514 514  
453 +=== 5.2.1 LoRa ~-~-> LoRa ===
515 515  
516 -1.
517 -11. LoRa Settings
518 -111. LoRa ~-~-> LoRa
519 -
520 520  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
521 521  
522 -
523 523  Different DLOS8N hardware version can support different frequency range:
524 524  
525 525  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -527,7 +527,7 @@
527 527  
528 528  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
529 529  
530 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image043.png]]
464 +[[image:1652423554776-574.png||height="380" width="740"]]
531 531  
532 532  Note *: See this instruction for how to customize frequency band:
533 533  
... ... @@ -534,67 +534,53 @@
534 534  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
535 535  
536 536  
471 +=== 5.2.2 LoRa ~-~-> ABP Decryption ===
537 537  
538 -1.
539 -11.
540 -111. LoRa ~-~-> ABP Decryption
541 -
542 542  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
543 543  
544 544  * No internet connection.
545 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>url:http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction]]).
476 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
546 546  
547 -Detail of this feature: [[http:~~/~~/wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node>>url:http://wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node]]
478 +Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
548 548  
549 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.png]]
480 +[[image:1652423628833-467.png||height="357" width="755"]]
550 550  
551 551  
483 +== 5.3 LoRaWAN Settings ==
552 552  
553 -1.
554 -11. LoRaWAN Settings
555 -111. LoRaWAN ~-~-> LoRaWAN
485 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
556 556  
557 557  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
558 558  
559 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image045.png]]
489 +[[image:1652423628833-467.png||height="357" width="755"]]
560 560  
561 -Note
491 +(% style="color:red" %)**Note:**
562 562  
563 563  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
564 564  
565 565  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
566 566  
567 -See [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets>>url:http://wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets]]
497 +See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
568 568  
569 569  
500 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
570 570  
571 -1.
572 -11.
573 -111. LoRaWAN ~-~-> Amazon AWS-IoT
502 +[[image:1652428499323-384.png||height="275" width="723"]]
574 574  
575 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.png]]
576 -
577 577  Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
578 578  
579 579  
507 +=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
580 580  
581 -
582 -1.
583 -11.
584 -111. LoRaWAN ~-~-> LORIOT
585 -
586 586  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
587 587  
588 588  Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
589 589  
590 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image047.png]]
513 +[[image:1652428648903-878.png||height="266" width="731"]]
591 591  
592 592  
516 +== 5.4 MQTT Settings ==
593 593  
594 -
595 -1.
596 -11. MQTT Settings
597 -
598 598  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
599 599  
600 600  Instruction:
... ... @@ -601,108 +601,100 @@
601 601  
602 602  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
603 603  
524 +[[image:1652428705046-212.png||height="417" width="733"]]
604 604  
605 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.png]]
606 606  
527 +== 5.5 System ==
607 607  
608 -1.
609 -11. System
610 -111. System ~-~-> System Overview
529 +=== 5.5.1 System ~-~-> System Overview ===
611 611  
612 612  Shows the system info:
613 613  
614 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image049.png]]
533 +[[image:1652428773760-580.png||height="408" width="728"]]
615 615  
616 -1.
617 -11.
618 -111. System ~-~-> General ( login settings)
619 619  
620 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.png]]
536 +=== 5.5.2 System ~-~-> General ( login settings) ===
621 621  
622 -System Password:
538 +[[image:1652428861256-300.png||height="354" width="724"]]
623 623  
624 -There are two login for DLOS8N: root /dragino or admin /dragino. Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
540 +**__System Password:__**
625 625  
542 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
543 +
626 626  This page can be used to set the password for them.
627 627  
546 +(((
547 +
548 +)))
628 628  
629 -Timezone:
550 +**__Timezone:__**
630 630  
631 631  Set device timezone.
632 632  
554 +(((
555 +
556 +)))
633 633  
634 -Port forwarding:
558 +**__Port forwarding:__**
635 635  
636 636  Enable/Disable the HTTP and SSH access via WAN interface.
637 637  
638 638  
563 +=== 5.5.3 System ~-~-> Network ===
639 639  
565 +[[image:1652429149053-824.png||height="467" width="725"]]
640 640  
641 -1.
642 -11.
643 -111. System ~-~-> Network
567 +**__LAN Settings:__**
644 644  
645 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image051.png]]
646 -
647 -LAN Settings:
648 -
649 649  When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
650 650  
571 +(((
572 +
573 +)))
651 651  
652 -WAN Settings:
575 +__**WAN Settings:**__
653 653  
654 654  Setting for DLOS8N WAN port
655 655  
579 +(((
580 +
581 +)))
656 656  
657 -WiFi Settings:
583 +__**WiFi Settings:**__
658 658  
659 659  Setting for DLOS8N WiFi IP when use it as WiFi Client
660 660  
661 661  
588 +=== 5.5.4 System ~-~-> WiFi ===
662 662  
663 -
664 -
665 -1.
666 -11.
667 -111. System ~-~-> WiFi
668 -
669 669  DLOS8N WiFi Settings.
670 670  
671 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.png]]
592 +[[image:1652429430767-921.png||height="367" width="723"]]
672 672  
673 673  
674 -1.
675 -11.
676 -111. System ~-~-> Cellular
595 +=== 5.5.5 System ~-~-> Cellular ===
677 677  
678 678  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
679 679  
680 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
599 +[[image:1652429309615-825.png||height="320" width="732"]]
681 681  
682 -Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
601 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
683 683  
684 684  
604 +=== 5.5.6 System ~-~-> Network Status ===
685 685  
606 +[[image:1652429486609-208.png||height="415" width="728"]]
686 686  
687 -1.
688 -11.
689 -111. System ~-~-> Network Status
690 690  
691 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image053.png]]
609 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
692 692  
693 -
694 -
695 -1.
696 -11.
697 -111. System ~-~-> Remote Mgnt & Auto Provision
698 -
699 699  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
700 700  
701 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.png]]
613 +[[image:1652429518191-846.png||height="332" width="733"]]
702 702  
703 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image055.png]]
615 +[[image:1652429527544-247.png||height="327" width="724"]]
704 704  
705 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.png]]
617 +[[image:1652429537849-154.png||height="339" width="722"]]
706 706  
707 707  Please see this document for detail:
708 708  
... ... @@ -713,12 +713,10 @@
713 713  
714 714  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
715 715  
716 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image057.png]]
628 +[[image:1652429624400-864.png||height="432" width="716"]]
717 717  
718 718  
719 -1.
720 -11.
721 -111. System ~-~-> Firmware Upgrade
631 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
722 722  
723 723  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
724 724  
... ... @@ -731,198 +731,182 @@
731 731  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
732 732  
733 733  
734 -The file named as **xxxxx–xxxxx-squashfs-sysupgrade.bin **is the upgrade Image. There are different methods to upgrade, as below.
644 +The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
735 735  
646 +(% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
736 736  
737 -**Web à System à Firmware Upgrade**
648 +[[image:1652429711145-862.png||height="270" width="737"]]
738 738  
739 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image058.png]]
740 740  
741 -
742 742  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
743 743  
653 +(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
744 744  
745 -**NOTE**: You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
746 -
747 -
748 -
749 -
750 750  The system will automatically boot into the new firmware after upgrade.
751 751  
657 +[[image:1652429962190-224.png||height="358" width="729"]]
752 752  
753 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image059.png]]
754 754  
660 +(% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
755 755  
756 -Note *: User can also upgrade firmware via Linux console
662 +SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
757 757  
758 -SCP the firmware to the system** /var** directory and then run
664 +(% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
759 759  
760 -**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
666 +(% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
761 761  
762 762  
763 -**NOTE**: it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
669 +=== 5.5.9 System ~-~-> Reboot/Reset ===
764 764  
671 +[[image:1652430197132-330.png||height="256" width="724"]]
765 765  
766 -1.
767 -11.
768 -111. System ~-~-> Reboot/Reset
769 769  
770 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.png]]
674 +=== 5.5.10 System ~-~-> Package Maintain ===
771 771  
676 +[[image:1652430243826-126.png||height="289" width="723"]]
772 772  
773 -
774 -1.
775 -11.
776 -111. System ~-~-> Package Maintain
777 -
778 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image061.png]]
779 -
780 780  Place to show what package has installed and possible to upgrade packages.
781 781  
782 782  
681 +== 5.6 LogRead ==
783 783  
683 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
784 784  
785 -1.
786 -11. LogRead
787 -111. LogRead ~-~-> LoRa Log
685 +[[image:1652430356784-567.png||height="325" width="730"]]
788 788  
789 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.png]]
790 -
791 791  Show the frequency for LoRa Radio and traffics.
792 792  
793 793  
794 -1.
795 -11.
796 -111. LogRead ~-~-> System Log
690 +=== 5.6.2 LogRead ~-~-> System Log ===
797 797  
798 798  Show the system log
799 799  
800 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image063.png]]
694 +[[image:1652430369760-511.png||height="373" width="730"]]
801 801  
802 802  
697 += 6. More features =
803 803  
804 -1. More features
805 -11. More instructions
699 +== 6.1 More instructions ==
806 806  
807 807  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
808 808  
809 809  
704 += 7. Linux System =
810 810  
811 -
812 -1. Linux System
813 -
814 814  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
815 815  
816 -1.
817 -11. SSH Access for Linux console
708 +== 7.1 SSH Access for Linux console ==
818 818  
819 819  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
820 820  
821 -
822 822  IP address:  IP address of DLOS8N
823 823  
824 824  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
825 825  
826 -User Name:      **root**
716 +User Name:      (% style="color:green" %)**root**
827 827  
828 -Password:         **dragino** (default)
718 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
829 829  
830 -
831 831  After logging in, you will be in the Linux console and can enter commands as shown below.
832 832  
722 +[[image:1652431588565-830.png]]
833 833  
834 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.png]]
724 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
835 835  
726 +[[image:1652431609193-637.png||height="214" width="732"]]
836 836  
837 -The “logread -f” command can be used to debug how system runs.
838 838  
839 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image065.png]]
729 +== 7.2 Edit and Transfer files ==
840 840  
731 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
841 841  
842 -
843 -
844 -1.
845 -11. Edit and Transfer files
846 -
847 -The DLOS8N supports the **SCP protocol** and has a built-in **SFTP server**. There are many ways to edit and transfer files using these protocols.
848 -
849 -
850 850  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
851 851  
852 852  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
853 853  
854 -
855 855  Screenshot is as below:
856 856  
857 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.png]]
739 +[[image:1652431650755-450.png]]
858 858  
859 859  
860 -1.
861 -11. File System
742 +== 7.3 File System ==
862 862  
863 863  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
864 864  
865 -
866 866  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
867 867  
868 868  You can use an external USB flash memory device to extend the size of flash memory for storage.
869 869  
870 870  
751 +== 7.4 Package maintenance system ==
871 871  
753 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
872 872  
873 -1.
874 -11. Package maintenance system
755 +Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
875 875  
876 -DLOS8N uses the OpenWrt [[OPKG package maint>>url:https://wiki.openwrt.org/doc/techref/opkg]][[e>>url:https://wiki.openwrt.org/doc/techref/opkg]][[n>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ance>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ system>>url:https://wiki.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
757 +**In Linux Console run:**
877 877  
759 +(((
760 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
761 +)))
878 878  
879 -Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>url:https://wiki.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/wiki.openwrt.org/doc/techref/opkg>>url:https://wiki.openwrt.org/doc/techref/opkg]])
763 +(((
764 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
765 +)))
880 880  
767 +(((
768 +(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
769 +)))
881 881  
882 -In Linux Console run:
883 -
884 -**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
885 -
886 -**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
887 -
888 -**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
889 -
890 890  The system will automatically install the required packages as shown below.
891 891  
892 892  
893 -//root@dragino-169d30:/etc/opkg# opkg install iperf//
774 +(((
775 +(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
776 +)))
894 894  
895 -//Installing iperf (2.0.12-1) to root…//
778 +(((
779 +(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
780 +)))
896 896  
897 -//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
782 +(((
783 +(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
784 +)))
898 898  
899 -//Installing uclibcxx (0.2.4-3) to root…//
786 +(((
787 +(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
788 +)))
900 900  
901 -//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
790 +(((
791 +(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
792 +)))
902 902  
903 -//Configuring uclibcxx.//
794 +(((
795 +(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
796 +)))
904 904  
905 -//Configuring iperf.//
798 +(((
799 +(% style="background-color:#dcdcdc" %)//Configuring iperf.//
800 +)))
906 906  
802 += 8. Upgrade Linux Firmware =
907 907  
908 -1. Upgrade Linux Firmware
909 909  
910 -1. FAQ
911 -11. How can I configure for a customized frequency band?
805 += 9. FAQ =
912 912  
807 +== 9.1 How can I configure for a customized frequency band? ==
808 +
913 913  See below link for how to customize frequency band:
914 914  
915 915  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
916 916  
917 917  
918 -1.
919 -11. Can I connect DLOS8N to LORIOT?
814 +== 9.2 Can I connect DLOS8N to LORIOT? ==
920 920  
921 921  Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
922 922  
923 923  
924 -1.
925 -11. Can I make my own firmware for the gateway, where can I find the source code?
819 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
926 926  
927 927  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
928 928  
... ... @@ -929,40 +929,35 @@
929 929  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
930 930  
931 931  
932 -1.
933 -11. Can I use 868Mhz version for 915Mhz bands?
826 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
934 934  
935 935  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
936 936  
937 937  
831 += 10. Trouble Shooting =
938 938  
833 +== 10.1 I get kernel error when install new package, how to fix? ==
939 939  
940 -1. Trouble Shooting
941 -11. I get kernel error when install new package, how to fix?
942 -
943 943  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
944 944  
837 +(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
945 945  
946 -root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
839 +(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
947 947  
948 -Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
841 +(% style="background-color:yellow" %)Collected errors:
949 949  
950 -Collected errors:
843 +(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
951 951  
952 -~* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
845 +(% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
953 953  
954 -*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
847 + (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
955 955  
956 - ~* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
957 -
958 -
959 959  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
960 960  
961 -Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
851 +(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
962 962  
963 963  
964 -1.
965 -11. How to recover the DLOS8N if the firmware crashes
854 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
966 966  
967 967  Please follow this instruction to recover your gateway:
968 968  
... ... @@ -969,38 +969,34 @@
969 969  [[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
970 970  
971 971  
861 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
972 972  
863 +[[image:1652435238615-272.png||height="247" width="727"]]
973 973  
974 -
975 -1.
976 -11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
977 -
978 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
979 -
980 980  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
981 981  
982 -(Note: fallback IP can be disabled in the WAN and DHCP page)
867 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
983 983  
984 984  
985 985  Steps to connect via fall back IP:
986 986  
987 -1. Connect PC’s Ethernet port to DLOS8N’s WAN port
988 -1. Configure PC’s Ethernet port has
989 -IP: 172.31.255.253 and
990 -Netmask: 255.255.255.252
872 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
991 991  
874 +2. Configure PC’s Ethernet port has
875 + IP: 172.31.255.253 and
876 + Netmask: 255.255.255.252
877 +
992 992  As below photo:
993 993  
994 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
880 +[[image:1652435256286-879.png]]
995 995  
996 -1. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
882 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
997 997  
998 998  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
999 999  
1000 1000  
887 += 11. Order Info =
1001 1001  
1002 -1. Order Info
1003 -
1004 1004  **//PART: DLOS8N-XXX-YYY//:**
1005 1005  
1006 1006  **//XXX: Frequency Band//**
... ... @@ -1017,11 +1017,8 @@
1017 1017  
1018 1018  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1019 1019  
905 += 12. Packing Info =
1020 1020  
1021 -
1022 -
1023 -1. Packing Info
1024 -
1025 1025  **Package Includes**:
1026 1026  
1027 1027  * DLOS8N LoRaWAN Gateway x 1
... ... @@ -1035,13 +1035,9 @@
1035 1035  * Package Size: 14.5 x 13.5 x 6 cm
1036 1036  * Weight: 300g
1037 1037  
1038 -1. Support
920 += 13. Support =
1039 1039  
1040 1040  * Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1041 1041  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1042 1042  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1043 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
1044 -
1045 -[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1046 -
1047 -
925 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652414114583-532.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.9 KB
Content
1652414137639-956.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +71.9 KB
Content
1652414287022-223.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.2 KB
Content
1652420169255-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.0 KB
Content
1652420327792-211.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +118.7 KB
Content
1652420606018-181.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +156.8 KB
Content
1652420718132-929.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +892.9 KB
Content
1652421032117-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1652421151598-130.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1652421168047-470.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1652421179500-890.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.7 KB
Content
1652421351382-793.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +205.6 KB
Content
1652421929753-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1652422127479-258.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.0 KB
Content
1652422142236-792.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
1652422440891-514.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1652422470352-518.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.9 KB
Content
1652422479876-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +65.2 KB
Content
1652422509034-682.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content
1652422624783-580.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.0 KB
Content
1652422685063-596.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1652422703020-955.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
1652422737399-529.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +128.2 KB
Content
1652422763536-750.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.9 KB
Content
1652422794767-871.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
1652422840936-838.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +202.7 KB
Content
1652422946999-255.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1652422975885-591.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1652422998005-968.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
1652423022781-339.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
1652423046741-467.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
1652423277549-324.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
1652423418568-752.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +178.5 KB
Content
1652423554776-574.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +125.7 KB
Content
1652423628833-467.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
1652428499323-384.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.5 KB
Content
1652428648903-878.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
1652428705046-212.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +102.2 KB
Content
1652428773760-580.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.8 KB
Content
1652428861256-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
1652429149053-824.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.8 KB
Content
1652429273783-461.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.5 KB
Content
1652429309615-825.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1652429430767-921.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.5 KB
Content
1652429486609-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1652429518191-846.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +80.4 KB
Content
1652429527544-247.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +89.6 KB
Content
1652429537849-154.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +107.5 KB
Content
1652429624400-864.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.3 KB
Content
1652429711145-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1652429962190-224.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1652430197132-330.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.2 KB
Content
1652430243826-126.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
1652430356784-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1652430369760-511.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1652430800213-833.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1652431153457-839.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
1652431569353-626.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1652431588565-830.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1652431609193-637.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1652431650755-450.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
1652435238615-272.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +68.7 KB
Content
1652435256286-879.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +111.5 KB
Content
image-20220513140429-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +116.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0