Changes for page LPS8N -- LoRaWAN Gateway User Manual

Last modified by Kilight Cao on 2024/05/18 14:36

From version < 80.8 >

edited by Xiaoling
on 2022/05/25 16:41

To version < 142.1 >

edited by Xiaoling
on 2022/07/07 09:07

Change comment: Uploaded new attachment "1657156052651-770.png", version {1}

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 54 added, 0 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--DLOS8N Outdoor LoRaWAN Gateway
++LPS8N - LoRaWAN Gateway User Manual

Content

@@ -1,48 +1,57 @@
  (% style="text-align:center" %)
--[[image:1652409757234-446.png||height="399" width="399"]]
++[[image:1656917428377-954.png||height="475" width="475"]]
--**DLOS8N Outdoor LoRaWAN Gateway User Manual**
--
  **Table of Contents：**
--{{toc/}}
--= 1. Introduction =
--== 1.1 What is the DLOS8N ==
++
++
++
++
++
++
++(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
++
++== 1.1  What is the LPS8N ==
++
++
++
  (((
--The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
++The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
  )))
  (((
--DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
++The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
  )))
  (((
--DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
++LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
  )))
  (((
--DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
++LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
  )))
  (((
--DLOS8N supports (% style="color:#4f81bd" %) **auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
++
  )))
--[[image:1652411526195-923.png||height="494" width="731"]]
++[[image:1656918270059-192.png]]
--== 1.2 Specifications ==
--**Hardware System:**
++== 1.2  Specifications ==
++
++(% style="color:#037691" %)**Hardware System:**
++
  (((
           Linux Part:
  )))
@@ -51,18 +51,17 @@
  * 64MB RAM
  * 16MB Flash
--**Interface:**
++(% style="color:#037691" %)**Interface:**
  * 10M/100M RJ45 Ports x 1
  * WiFi : 802.11 b/g/n
  * LoRaWAN Wireless
--* Power Input: 12 ~~ 24 V DC, 2 A
--* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
++* Power Input: 5V DC, 2A, Type C
  * USB 2.0 host connector x 1
  * Mini-PCI E connector x 1
  * SX1302 + 2 x SX1250
--**WiFi Spec:**
++(% style="color:#037691" %)**WiFi Spec:**
  * IEEE 802.11 b/g/n
  * Frequency Band: 2.4 ~~ 2.462GHz
@@ -75,9 +75,9 @@
  ** 11g 54M : -71dbm
  ** 11n 20M : -67dbm
--**LoRa Spec:**
++(% style="color:#037691" %)**LoRa Spec:**
--* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
++* Up to -140 dBm sensitivity
  * 70 dB CW interferer rejection at 1 MHz offset
  * Able to operate with negative SNR, CCR up to 9dB
  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
@@ -86,125 +86,119 @@
  * Dynamic data-rate (DDR) adaptation
  * True antenna diversity or simultaneous dual-band operation
--**Cellular 4G LTE (optional):**
++(% style="color:#037691" %)**Cellular 4G LTE (optional):**
--* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
--* Standard Size SIM Slot
--* 2 x 4G Sticker Antenna.
++* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
++* Micro SIM Slot
++* External 4G Sticker Antenna.
  * Up to 150Mbps downlink and 50Mbps uplink data rates
  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
--**Power over Ethernet:**
--* IEEE 802.3af compliant.
--* Support wide input voltage range  37Vdc to 57Vdc.
--* Thermal cut off.
--* Short circuit protection.
--* Over current protection
--* Isolation level 4 KVrms.
--* Enhanced surge protection
--== 1.3 Features ==
++== 1.3  Features ==
--* Open Source Embedded Linux system
--* Managed by Web GUI, SSH via LAN or WiFi
--* Support Semtech UDP packet forwarder
--* Support LoRaWAN Station Connection
--* Cellular Failover conntection(option)
--* Direct Communication to LoRaWAN ABP Node
--* LoRaWAN packet filtering
--* Far seeing LED indicator
--* Built-in GPS module for location & timing
--* External fiber glass antenna
--* Auto-Provision
--* Remote Monitoring
--* 802.3af PoE
--* IP65
--* Lighting Protection
--* Power Consumption:12v ,300-500mA
++* Open Source OpenWrt system
++* Managed by Web GUI, SSH via WAN or WiFi
++* Remote access with Reverse-SSH or remote.it
++* Emulates 49x LoRa demodulators
++* LoRaWAN Gateway
++* 10 programmable parallel demodulation paths
++* Pre-configure to support different LoRaWAN regional settings.
++* Allow to customize LoRaWAN regional parameters.
++* Support Local decode ABP end node info and transfer to MQTT server
++* Support different level log in.
++* Support Semtech Packet Forwarder
++* Support LoRaWAN basic station.
++* Optional 3G/4G cellular connection
--== 1.4 Hardware System Structure ==
--[[image:1652411641871-482.png||height="416" width="716"]]
--== 1.5 DLOS8N Applications ==
++== 1.4  Hardware System Structure ==
--[[image:1652411671209-920.png||height="618" width="650"]]
++[[image:1657079015096-949.png]]
--== 1.6 LED Indicators ==
--[[image:1652411720670-489.png]]
++== 1.5  LPS8N Applications ==
++[[image:1657079055940-721.png]]
--There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
--(((
--(((
--* (((
--(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
--)))
--)))
++== 1.6  LED Indicators ==
--* (((
--(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
--)))
--* (((
--(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
--)))
--)))
--== 1.7 WiFi Direction ==
++LPS8N has totally four LEDs, They are:
--DLOS8N use directional WiFi Antenna. The best direction is as below:
++* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
++* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
++* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
++** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
++** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or   b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
++** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
--[[image:1652412859663-161.png||height="341" width="333"]]
++* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
--= 2. Access and Configure DLOS8N =
--The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
--== 2.1 Find IP address of DLOS8N ==
++= 2.  Access and Configure LPS8N =
--=== 2.1.1 Connect via WiFi ===
++(((
++The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
++)))
--[[image:1652412985720-934.png]]
--At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
++== 2.1  Find IP address of LPS8N ==
++=== 2.1.1  Connect via WiFi ===
++
++[[image:1657085974260-168.png]]
++
++
++At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
++
  [[image:1652413127647-377.png]]
--(% style="background-color:#ffffcc" %)dragino+dragino
  (((
  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
++
++
++
  )))
--=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
++=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
--[[image:1652414114583-532.png]]
++[[image:1657086105922-299.png]]
  (((
--Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
++Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
++
++
++
  )))
--=== 2.1.3 Connect via WiFi with DHCP IP from router ===
++=== 2.1.3  Connect via WiFi with DHCP IP from router ===
--[[image:1652414137639-956.png]]
++[[image:1657086192720-649.png]]
--If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
++If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
--=== 2.1.4 Connect via Ethernet with fall back ip ===
--The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
--== 2.2 Access Configure Web UI ==
++=== 2.1.4  Connect via Ethernet with fall back ip ===
++The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
++
++
++
++== 2.2  Access Configure Web UI ==
++
  **Web Interface**
--Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
++Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]]  (Access via WiFi AP network)
@@ -213,7 +213,7 @@
  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
--You will see the login interface of DLOS8N as shown below.
++You will see the login interface of LPS8N as shown below.
  The account details for Web Login are:
@@ -223,50 +223,67 @@
  [[image:1652414287022-223.png]]
--= 3. Typical Network Setup =
--== 3.1 Overview ==
--The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
++= 3.  Typical Network Setup =
++== 3.1  Overview ==
++
++The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
++
  * **WAN Port Internet Mode**
  * **WiFi Client Mode**
  * **WiFi AP Mode**
--* **Cellular Mode**
--== 3.2 Use WAN port to access Internet ==
--By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
--[[image:1652420169255-959.png]]
++== 3.2  Use WAN port to access Internet ==
--== 3.3 Access the Internet as a WiFi Client ==
++By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
++
++[[image:1657088560833-398.png]]
++
++
++== 3.3  Access the Internet as a WiFi Client ==
++
  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
  (((
  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~->  WiFi WAN Client Settings**
++
++[[image:1657088818095-182.png]]
  )))
--[[image:1652420327792-211.png]]
  (((
  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
++
++
  )))
--== 3.4 Access the Internet via Cellular ==
++== 3.4  Use built-in 4G modem for internet access ==
--If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
++(((
++(((
++If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
++)))
++
  (((
--First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
++First, install the Micro SIM card as below direction
  )))
--[[image:1652420606018-181.png]]
++(((
++Second, Power off/ ON LPS8N to let it detect the SIM card.
++)))
++)))
++[[image:1657090855037-497.png]]
++
  (((
--[[image:1652420718132-929.png||height="427" width="727"]]
++
  )))
  (((
@@ -278,78 +278,90 @@
  )))
  (((
--[[image:1652421032117-341.png||height="329" width="752"]]
++[[image:1657090932270-444.png]]
  )))
--(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
--== 3.5 Check Internet connection ==
++== 3.5  Check Internet connection ==
  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
  * GREEN Tick  [[image:1652436675869-206.png||height="14" width="15"]]  : This interface has Internet connection.
--* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]]  : This interface has IP address but don’t use it for internet connection.
--* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
++* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]]  : This interface has IP address but don't use it for internet connection.
++* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]]  : This interface doesn't connected.
--[[image:1652421351382-793.png||height="339" width="765"]]
++[[image:1657091099235-452.png]]
--= 4. Example: Configure as a LoRaWAN gateway =
--DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
++= 4.  Example: Configure as a LoRaWAN gateway =
++
++LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
++
  (((
--[[image:image-20220513140429-1.png||height="565" width="824"]]
++[[image:1657091257648-882.png]]
  )))
--This chapter describes how to use the DLOS8Nto work with
++(((
++This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
++)))
--[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
--== 4.1 Create a gateway in TTN V3 Server ==
++== 4.1  Create a gateway in TTN V3 Server ==
++
  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
  (((
--Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
++Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
  )))
  (((
--[[image:1652421929753-168.png||height="403" width="739"]]
++[[image:1657091583941-544.png]]
  )))
--The example gateway id is: **a840411e96744154**
++The example gateway id is: (% style="color:green" %)**a840411e96744154**
++
  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
--[[image:1652422127479-258.png||height="346" width="738"]]
++[[image:1657091739530-531.png]]
++
  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
  (((
--[[image:1652422142236-792.png||height="356" width="737"]]
++[[image:1657091719947-297.png]]
  )))
  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
--* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
--* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
--* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
--* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
++* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
++* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
++* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
++* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
++
++
++
  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
--[[image:1652422440891-514.png||height="360" width="747"]]
++[[image:1657091941182-367.png]]
  Click the Gateway icon and then click Add gateway.
++
  Open the following page:
--   [[image:1652422470352-518.png||height="391" width="716"]]
--[[image:1652422479876-297.png||height="398" width="729"]]
++ [[image:image-20220706155323-5.png||height="579" width="1060"]]
++
++[[image:image-20220706155323-6.png||height="582" width="1066"]]
++
++
  (((
  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
  )))
@@ -356,16 +356,17 @@
  After creating the gateway, you can see the gateway info, as below.
--[[image:1652422509034-682.png||height="299" width="739"]]
++[[image:1657094130908-567.png]](% style="display:none" %)
--== 4.2 Configure DLOS8N to connect to TTN v3 ==
++== 4.2  Configure DLOS8N to connect to TTN v3 ==
++
  (((
--You can now configure the DLOS8N to let it connect to TTN network V3.
++You can now configure the LPS8N to let it connect to TTN network V3.
  )))
  (((
--Make sure your DLOS8N has a working Internet Connection first.
++Make sure your LPS8N has a working Internet Connection first.
  )))
  (((
@@ -372,31 +372,35 @@
  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
  )))
--[[image:1652422624783-580.png||height="327" width="729"]]
++[[image:1657094183213-301.png]]
  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
++
  In the home page, we can see the LoRaWAN connection is ready now.
--[[image:1652422685063-596.png||height="327" width="729"]]
++[[image:1657094202420-798.png]]
++
  In TTN v3 portal, we can also see the gateway is connected.
--[[image:1652422703020-955.png||height="343" width="730"]]
++[[image:1657094221515-510.png]]
--== 4.3 Configure frequency ==
--We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
++== 4.3  Configure frequency ==
--[[image:1652422737399-529.png||height="362" width="737"]]
++We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
++[[image:1657094249818-468.png]]
++
  In logread page, user can check the frequency actually used.
-- [[image:1652422763536-750.png||height="514" width="730"]]
++ [[image:1657094333704-207.png]]
--== 4.4 Add a LoRaWAN End Device ==
++== 4.4  Add a LoRaWAN End Device ==
++
  (((
  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
  )))
@@ -409,6 +409,8 @@
  (((
  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
++
++
  )))
  (((
@@ -423,10 +423,12 @@
  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
  )))
--[[image:1652422840936-838.png]]
++[[image:1657094382177-591.png]]
  (((
  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
++
++
  )))
  (((
@@ -437,16 +437,19 @@
  Select **Add Application** to open the screen below.
  )))
--[[image:1652422946999-255.png||height="356" width="744"]]
++[[image:1657094417175-831.png]]
  Open the **Application **select** Add end device**
++
  Start Register the end device
--[[image:1652422975885-591.png||height="359" width="726"]]
++[[image:1657094444802-101.png]]
  (((
  Select OTAA activation mode
++
++
  )))
  (((
@@ -453,18 +453,22 @@
  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
  )))
--[[image:1652422998005-968.png||height="352" width="744"]]
++[[image:1657094475730-208.png]]
  First, input the End device ID, AppEUI and DevEUI.
--[[image:1652423022781-339.png||height="365" width="741"]]
++[[image:1657094646429-966.png]]
++
  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
--[[image:1652423046741-467.png||height="355" width="736"]]
++[[image:1657094674045-755.png]]
++
  (((
  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
++
++
  )))
  (((
@@ -475,58 +475,62 @@
  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
  )))
--[[image:1652423277549-324.png||height="273" width="745"]]
++[[image:1657094791060-639.png]]
--= 5. Web Configure Pages =
--== 5.1 Home ==
++= 5.  Web Configure Pages =
++== 5.1  Home ==
++
  Shows the system running status.
--[[image:1652423418568-752.png||height="329" width="724"]]
++[[image:1657094893942-726.png]]
--== 5.2 LoRa Settings ==
--=== 5.2.1 LoRa ~-~-> LoRa ===
++== 5.2  LoRa Settings ==
++=== 5.2.1  LoRa ~-~-> LoRa ===
++
  (((
  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
  )))
  (((
--Different DLOS8N hardware version can support different frequency range:
++Different LPS8N hardware version can support different frequency range:
  )))
--* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
--* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
++* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
++* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
  (((
--After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
++
++
++After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
  )))
--[[image:1652423554776-574.png||height="380" width="740"]]
++[[image:1657094930903-357.png]]
--Note *: See this instruction for how to customize frequency band:
++Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
--[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
  === 5.2.2 LoRa ~-~-> ABP Decryption ===
--The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
++The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
  * No internet connection.
--* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
++* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
  (((
--Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
++Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
  )))
--[[image:1652423628833-467.png||height="357" width="755"]]
++[[image:1657095412271-942.png]]
--== 5.3 LoRaWAN Settings ==
--=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
++== 5.3  LoRaWAN Settings ==
++=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
++
  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
  [[image:1652423628833-467.png||height="357" width="755"]]
@@ -533,21 +533,24 @@
  (% style="color:red" %)**Note:**
--~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
++~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
--See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
++**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
--=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
++=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
++
  [[image:1652428499323-384.png||height="275" width="723"]]
  (((
--Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
++Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
++
++
  )))
--=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
++=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
  (((
  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
@@ -554,39 +554,42 @@
  )))
  (((
--Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
++Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
  )))
  [[image:1652428648903-878.png||height="266" width="731"]]
--== 5.4 MQTT Settings ==
--If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
++== 5.4  MQTT Settings ==
--Instruction:
++If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
--[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
++Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
++
  [[image:1652428705046-212.png||height="417" width="733"]]
--== 5.5 System ==
--=== 5.5.1 System ~-~-> System Overview ===
++== 5.5  System ==
++=== 5.5.1  System ~-~-> System Overview ===
++
  Shows the system info:
--[[image:1652428773760-580.png||height="408" width="728"]]
++[[image:1657155158184-134.png]]
--=== 5.5.2 System ~-~-> General ( login settings) ===
--[[image:1652428861256-300.png||height="354" width="724"]]
++=== 5.5.2  System ~-~-> General ( login settings) ===
++
++[[image:1657155183982-792.png]]
++
  (((
  **__System Password:__**
  )))
  (((
--There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
++There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
  )))
  (((
@@ -594,51 +594,63 @@
  )))
  (((
--**__Timezone:__**Set device timezone.
++**__Timezone:  __**Set device timezone.
  )))
  (((
--**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
++**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
++
++
++
  )))
--=== 5.5.3 System ~-~-> Network ===
++=== 5.5.3  System ~-~-> Network ===
--[[image:1652429149053-824.png||height="467" width="725"]]
++[[image:1657155288223-566.png]]
  (((
--**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
++**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
  )))
  (((
--__**WAN Settings:**__Setting for DLOS8N WAN port
++__**WAN Settings:  **__Setting for LPS8N WAN port
  )))
  (((
--__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
++__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
++
  )))
--=== 5.5.4 System ~-~-> WiFi ===
++=== 5.5.4  System ~-~-> WiFi ===
--DLOS8N WiFi Settings.
++LPS8N WiFi Settings.
--[[image:1652429430767-921.png||height="367" width="723"]]
++[[image:1657155457089-430.png]]
--=== 5.5.5 System ~-~-> Cellular ===
++
++=== 5.5.5  System ~-~-> Cellular ===
++
  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
--[[image:1652429309615-825.png||height="320" width="732"]]
--(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
++[[image:1657155507672-204.png]]
--=== 5.5.6 System ~-~-> Network Status ===
++(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
--[[image:1652429486609-208.png||height="415" width="728"]]
--=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
++=== 5.5.6  System ~-~-> Network Status ===
++
++
++[[image:1657155554265-721.png]]
++
++
++
++=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
++
  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
  [[image:1652429518191-846.png||height="332" width="733"]]
@@ -654,24 +654,25 @@
  )))
--R-SSH is for remote access device and management, introduction for how to use:
++R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
--[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
--
  [[image:1652429624400-864.png||height="432" width="716"]]
--=== 5.5.8 System ~-~-> Firmware Upgrade ===
--We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
++=== 5.5.8  System ~-~-> Firmware Upgrade ===
++
++We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
++
  * **Latest firmware**:  [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
--( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
++( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
--( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
++( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
++
  (((
  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
  )))
@@ -716,10 +716,24 @@
  === 5.6.1 LogRead ~-~-> LoRa Log ===
--[[image:1652430356784-567.png||height="325" width="730"]]
  Show the frequency for LoRa Radio and traffics.
++[[image:image-20220615204306-1.png||height="575" width="733"]]
++
++
++Show the IoT Server Connection State and FWD State
++
++[[image:image-20220616083933-1.png||height="556" width="729"]]
++
++DLOS8 can view GPS location in the Logread FWD State
++
++
++Show the Error logs, RxTxJson lorawan packages, and PULL State
++
++[[image:image-20220615205416-6.png||height="442" width="884"]]
++
++
  === 5.6.2 LogRead ~-~-> System Log ===
  Show the system log
@@ -730,8 +730,9 @@
  == 6.1 More instructions ==
--[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
++[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
++
  = 7. Linux System =
  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
@@ -756,6 +756,7 @@
  [[image:1652431609193-637.png||height="214" width="732"]]
++
  == 7.2 Edit and Transfer files ==
  (((
@@ -855,17 +855,16 @@
  == 9.1 How can I configure for a customized frequency band? ==
  (((
--See below link for how to customize frequency band:
++See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
  )))
  (((
--[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
++
  )))
--
  == 9.2 Can I connect DLOS8N to LORIOT? ==
--Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
++Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
  == 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
@@ -912,14 +912,13 @@
  == 10.2 How to recover the DLOS8N if the firmware crashes ==
  (((
--Please follow this instruction to recover your gateway:
++Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
  )))
  (((
--[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
++
  )))
--
  == 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
  [[image:1652435238615-272.png||height="247" width="727"]]
@@ -988,7 +988,7 @@
  = 13. Support =
--* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
++* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]

1656917428377-954.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+119.7 KB

Content

1656918270059-192.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+167.7 KB

Content

1657079015096-949.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+101.7 KB

Content

1657079055940-721.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+214.1 KB

Content

1657085974260-168.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.1 KB

Content

1657086105922-299.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+47.1 KB

Content

1657086192720-649.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+69.7 KB

Content

1657088560833-398.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+180.6 KB

Content

1657088818095-182.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+85.0 KB

Content

1657090855037-497.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+240.1 KB

Content

1657090932270-444.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.0 KB

Content

1657091099235-452.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+167.1 KB

Content

1657091257648-882.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+167.7 KB

Content

1657091583941-544.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+104.2 KB

Content

1657091719947-297.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+73.3 KB

Content

1657091739530-531.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+230.0 KB

Content

1657091941182-367.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+46.6 KB

Content

1657094130908-567.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+62.3 KB

Content

1657094183213-301.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+83.0 KB

Content

1657094202420-798.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+165.1 KB

Content

1657094221515-510.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+110.1 KB

Content

1657094249818-468.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+128.2 KB

Content

1657094333704-207.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+149.9 KB

Content

1657094382177-591.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+202.7 KB

Content

1657094417175-831.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.2 KB

Content

1657094444802-101.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+64.0 KB

Content

1657094475730-208.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+47.0 KB

Content

1657094646429-966.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+60.4 KB

Content

1657094674045-755.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.7 KB

Content

1657094791060-639.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.9 KB

Content

1657094893942-726.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+185.3 KB

Content

1657094930903-357.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+125.7 KB

Content

1657095412271-942.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.2 KB

Content

1657155158184-134.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+69.0 KB

Content

1657155183982-792.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.8 KB

Content

1657155288223-566.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+30.7 KB

Content

1657155457089-430.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+46.6 KB

Content

1657155507672-204.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.0 KB

Content

1657155554265-721.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.5 KB

Content

1657155630849-656.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.9 KB

Content

1657156052651-770.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.3 KB

Content

image-20220615204306-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.8 KB

Content

image-20220615204341-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.5 KB

Content

image-20220615204725-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+112.8 KB

Content

image-20220615204938-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+95.9 KB

Content

image-20220615205338-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.1 KB

Content

image-20220615205416-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+134.4 KB

Content

image-20220616083933-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.3 KB

Content

image-20220706115518-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.0 KB

Content

image-20220706115518-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.8 KB

Content

image-20220706115518-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.1 KB

Content

image-20220706115518-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.9 KB

Content

image-20220706155323-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+121.7 KB

Content

image-20220706155323-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+74.6 KB

Content

Changes for page LPS8N -- LoRaWAN Gateway User Manual

Summary

Details

Applications

Navigation