Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 74.2 >
edited by Xiaoling
on 2022/05/13 18:03
To version < 128.2 >
edited by Xiaoling
on 2022/07/06 16:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DLOS8N
1 +LPS8N - LoRaWAN Gateway User Manual
Content
... ... @@ -1,59 +3,76 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1652409757234-446.png||height="399" width="399"]]
2 +[[image:1656917428377-954.png||height="475" width="475"]]
5 5  
6 6  
7 7  
8 -**DLOS8N Outdoor LoRaWAN Gateway User Manual**
9 9  
10 -
11 11  **Table of Contents：**
12 12  
13 -{{toc/}}
14 14  
15 15  
16 16  
17 17  
18 -= 1. Introduction =
19 19  
20 -== 1.1 What is the DLOS8N ==
21 21  
22 -The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  
24 -DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
25 25  
26 -DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
27 27  
28 -DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
29 29  
30 -DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
31 31  
32 -[[image:1652411526195-923.png]]
33 33  
21 +(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
34 34  
35 -== 1.2 Specifications ==
23 +== 1.1  What is the LPS8N ==
36 36  
37 -**Hardware System:**
38 38  
26 +
27 +(((
28 +The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 +)))
30 +
31 +(((
32 +The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
33 +)))
34 +
35 +(((
36 +LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
37 +)))
38 +
39 +(((
40 +LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 +)))
42 +
43 +(((
44 +
45 +)))
46 +
47 +[[image:1656918270059-192.png]]
48 +
49 +
50 +== 1.2  Specifications ==
51 +
52 +
53 +(% style="color:#037691" %)**Hardware System:**
54 +
55 +(((
39 39   Linux Part:
57 +)))
40 40  
41 41  * 400Mhz ar9331 processor
42 42  * 64MB RAM
43 43  * 16MB Flash
44 44  
45 -**Interface:**
63 +(% style="color:#037691" %)**Interface:**
46 46  
47 47  * 10M/100M RJ45 Ports x 1
48 48  * WiFi : 802.11 b/g/n
49 49  * LoRaWAN Wireless
50 -* Power Input: 12 ~~ 24 V DC, 2 A
51 -* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
68 +* Power Input: 5V DC, 2A, Type C
52 52  * USB 2.0 host connector x 1
53 53  * Mini-PCI E connector x 1
54 54  * SX1302 + 2 x SX1250
55 55  
56 -**WiFi Spec:**
73 +(% style="color:#037691" %)**WiFi Spec:**
57 57  
58 58  * IEEE 802.11 b/g/n
59 59  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -66,9 +66,9 @@
66 66  ** 11g 54M : -71dbm
67 67  ** 11n 20M : -67dbm
68 68  
69 -**LoRa Spec:**
86 +(% style="color:#037691" %)**LoRa Spec:**
70 70  
71 -* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
88 +* Up to -140 dBm sensitivity
72 72  * 70 dB CW interferer rejection at 1 MHz offset
73 73  * Able to operate with negative SNR, CCR up to 9dB
74 74  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -77,130 +77,118 @@
77 77  * Dynamic data-rate (DDR) adaptation
78 78  * True antenna diversity or simultaneous dual-band operation
79 79  
80 -**Cellular 4G LTE (optional):**
97 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
81 81  
82 -* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
83 -* Standard Size SIM Slot
84 -* 2 x 4G Sticker Antenna.
99 +* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
100 +* Micro SIM Slot
101 +* External 4G Sticker Antenna.
85 85  * Up to 150Mbps downlink and 50Mbps uplink data rates
86 86  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
87 87  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
88 88  
89 -**Power over Ethernet:**
90 90  
91 -* IEEE 802.3af compliant.
92 -* Support wide input voltage range  37Vdc to 57Vdc.
93 -* Thermal cut off.
94 -* Short circuit protection.
95 -* Over current protection
96 -* Isolation level 4 KVrms.
97 -* Enhanced surge protection
107 +== 1.3  Features ==
98 98  
99 -== 1.3 Features ==
109 +* Open Source OpenWrt system
110 +* Managed by Web GUI, SSH via WAN or WiFi
111 +* Remote access with Reverse-SSH or remote.it
112 +* Emulates 49x LoRa demodulators
113 +* LoRaWAN Gateway
114 +* 10 programmable parallel demodulation paths
115 +* Pre-configure to support different LoRaWAN regional settings.
116 +* Allow to customize LoRaWAN regional parameters.
117 +* Support Local decode ABP end node info and transfer to MQTT server
118 +* Support different level log in.
119 +* Support Semtech Packet Forwarder
120 +* Support LoRaWAN basic station.
121 +* Optional 3G/4G cellular connection
100 100  
101 -* Open Source Embedded Linux system
102 -* Managed by Web GUI, SSH via LAN or WiFi
103 -* Support Semtech UDP packet forwarder
104 -* Support LoRaWAN Station Connection
105 -* Cellular Failover conntection(option)
106 -* Direct Communication to LoRaWAN ABP Node
107 -* LoRaWAN packet filtering
108 -* Far seeing LED indicator
109 -* Built-in GPS module for location & timing
110 -* External fiber glass antenna
111 -* Auto-Provision
112 -* Remote Monitoring
113 -* 802.3af PoE
114 -* IP65
115 -* Lighting Protection
116 -* Power Consumption:12v ,300-500mA
117 117  
118 -== 1.4 Hardware System Structure ==
124 +== 1.4  Hardware System Structure ==
119 119  
120 -[[image:1652411641871-482.png||height="425" width="732"]]
126 +[[image:1657079015096-949.png]]
121 121  
122 122  
123 -== 1.5 DLOS8N Applications ==
129 +== 1.5  LPS8N Applications ==
124 124  
125 -[[image:1652411671209-920.png||height="618" width="650"]]
131 +[[image:1657079055940-721.png]]
126 126  
127 127  
128 -== 1.6 LED Indicators ==
134 +== 1.6  LED Indicators ==
129 129  
130 -[[image:1652411720670-489.png]]
131 131  
137 +LPS8N has totally four LEDs, They are:
132 132  
133 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
139 +* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
140 +* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
141 +* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
142 +** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
143 +** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
144 +** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
134 134  
135 -(((
136 -(((
137 -* (((
138 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
139 -)))
140 -)))
146 +* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
141 141  
142 -* (((
143 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
144 -)))
145 -* (((
146 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
147 -)))
148 -)))
149 149  
150 150  
151 -== 1.7 WiFi Direction ==
152 152  
153 -DLOS8N use directional WiFi Antenna. The best direction is as below:
151 += 2.  Access and Configure LPS8N =
154 154  
155 -[[image:1652412859663-161.png||height="341" width="333"]]
153 +(((
154 +The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
155 +)))
156 156  
157 157  
158 -= 2. Access and Configure DLOS8N =
158 +== 2.1  Find IP address of LPS8N ==
159 159  
160 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
160 +=== 2.1.1  Connect via WiFi ===
161 161  
162 -== 2.1 Find IP address of DLOS8N ==
162 +[[image:1657085974260-168.png]]
163 163  
164 -=== 2.1.1 Connect via WiFi ===
165 165  
166 -[[image:1652412985720-934.png]]
165 +At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
167 167  
168 -
169 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
170 -
171 171  [[image:1652413127647-377.png]]
172 172  
173 -(% style="background-color:#ffffcc" %)dragino+dragino
174 174  
170 +(((
175 175  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
176 176  
177 177  
178 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
174 +
175 +)))
179 179  
180 -[[image:1652414114583-532.png]]
177 +=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
181 181  
179 +[[image:1657086105922-299.png]]
182 182  
183 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
184 184  
182 +(((
183 +Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
185 185  
186 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
187 187  
188 -[[image:1652414137639-956.png]]
186 +
187 +)))
189 189  
189 +=== 2.1.3  Connect via WiFi with DHCP IP from router ===
190 190  
191 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
191 +[[image:1657086192720-649.png]]
192 192  
193 193  
194 -=== 2.1.4 Connect via Ethernet with fall back ip ===
194 +If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
195 195  
196 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
197 197  
198 198  
199 -== 2.2 Access Configure Web UI ==
198 +=== 2.1.4  Connect via Ethernet with fall back ip ===
200 200  
200 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
201 +
202 +
203 +
204 +== 2.2  Access Configure Web UI ==
205 +
201 201  **Web Interface**
202 202  
203 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
208 +Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
204 204  
205 205  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
206 206  
... ... @@ -209,7 +209,7 @@
209 209  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
210 210  
211 211  
212 -You will see the login interface of DLOS8N as shown below.
217 +You will see the login interface of LPS8N as shown below.
213 213  
214 214  The account details for Web Login are:
215 215  
... ... @@ -221,91 +221,118 @@
221 221  
222 222  
223 223  
229 += 3.  Typical Network Setup =
224 224  
225 -= 3. Typical Network Setup =
231 +== 3.1  Overview ==
226 226  
227 -== 3.1 Overview ==
233 +The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
228 228  
229 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 -
231 231  * **WAN Port Internet Mode**
232 232  * **WiFi Client Mode**
233 233  * **WiFi AP Mode**
234 -* **Cellular Mode**
235 235  
236 -== 3.2 Use WAN port to access Internet ==
237 237  
238 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
240 +== 3.2  Use WAN port to access Internet ==
239 239  
240 -[[image:1652420169255-959.png]]
242 +By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
241 241  
242 242  
243 -== 3.3 Access the Internet as a WiFi Client ==
245 +[[image:1657088560833-398.png]]
244 244  
247 +
248 +== 3.3  Access the Internet as a WiFi Client ==
249 +
245 245  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
246 246  
252 +(((
247 247  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
248 248  
249 -[[image:1652420327792-211.png]]
255 +[[image:1657088818095-182.png]]
256 +)))
250 250  
251 251  
259 +(((
252 252  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
253 253  
262 +
263 +)))
254 254  
255 -== 3.4 Access the Internet via Cellular ==
265 +== 3.4  Use built-in 4G modem for internet access ==
256 256  
257 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
267 +(((
268 +(((
269 +If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
270 +)))
258 258  
259 259  
260 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
273 +(((
274 +First, install the Micro SIM card as below direction
275 +)))
261 261  
262 -[[image:1652420606018-181.png]]
277 +(((
278 +Second, Power off/ ON LPS8N to let it detect the SIM card.
279 +)))
280 +)))
263 263  
264 264  
265 -[[image:1652420718132-929.png||height="450" width="766"]]
283 +[[image:1657090855037-497.png]]
266 266  
285 +(((
286 +
287 +)))
267 267  
289 +(((
268 268  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
291 +)))
269 269  
270 -
293 +(((
271 271  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
295 +)))
272 272  
273 -[[image:1652421032117-341.png||height="329" width="752"]]
297 +(((
298 +[[image:1657090932270-444.png]]
299 +)))
274 274  
275 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
276 276  
302 +== 3.5  Check Internet connection ==
277 277  
278 -== 3.5 Check Internet connection ==
279 -
280 280  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
281 281  
282 -* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 -* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 -* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
306 +* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
307 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
308 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
285 285  
286 -[[image:1652421351382-793.png||height="339" width="765"]]
310 +[[image:1657091099235-452.png]]
287 287  
288 288  
289 -= 4. Example: Configure as a LoRaWAN gateway =
290 290  
291 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
314 += 4.  Example: Configure as a LoRaWAN gateway =
292 292  
293 -[[image:image-20220513140429-1.png||height="565" width="824"]]
316 +LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
294 294  
295 -This chapter describes how to use the DLOS8Nto work with
318 +(((
319 +[[image:1657091257648-882.png]]
320 +)))
296 296  
297 -[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
322 +(((
323 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 +)))
298 298  
299 299  
300 -== 4.1 Create a gateway in TTN V3 Server ==
301 301  
328 +== 4.1  Create a gateway in TTN V3 Server ==
329 +
302 302  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
303 303  
304 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
332 +(((
333 +Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
334 +)))
305 305  
306 -[[image:1652421929753-168.png||height="403" width="739"]]
336 +(((
337 +[[image:1657091583941-544.png]]
338 +)))
307 307  
308 -The example gateway id is: a840411e96744154
340 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
309 309  
310 310  
311 311  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
... ... @@ -312,133 +312,181 @@
312 312  
313 313  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
314 314  
315 -[[image:1652422127479-258.png||height="346" width="738"]]
347 +[[image:1657091739530-531.png]]
316 316  
317 317  
318 318  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
319 319  
320 -[[image:1652422142236-792.png||height="356" width="737"]]
352 +(((
353 +[[image:1657091719947-297.png]]
354 +)))
321 321  
322 -
323 323  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
324 324  
325 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
326 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
327 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
328 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
329 329  
359 +* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
360 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
361 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
362 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 +
364 +
330 330  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
331 331  
332 -[[image:1652422440891-514.png||height="360" width="747"]]
367 +[[image:1657091941182-367.png]]
333 333  
334 334  Click the Gateway icon and then click Add gateway.
335 335  
371 +
336 336  Open the following page:
337 337  
338 - [[image:1652422470352-518.png||height="391" width="716"]]
339 339  
340 -[[image:1652422479876-297.png||height="398" width="729"]]
375 + [[image:image-20220706155323-5.png||height="579" width="1060"]]
341 341  
377 +
378 +[[image:image-20220706155323-6.png||height="582" width="1066"]]
379 +
380 +
381 +(((
342 342  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
383 +)))
343 343  
344 344  After creating the gateway, you can see the gateway info, as below.
345 345  
346 -[[image:1652422509034-682.png||height="299" width="739"]]
387 +[[image:1657094130908-567.png]](% style="display:none" %)
347 347  
348 348  
349 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
390 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
350 350  
351 -You can now configure the DLOS8N to let it connect to TTN network V3.
392 +(((
393 +You can now configure the LPS8N to let it connect to TTN network V3.
394 +)))
352 352  
353 -Make sure your DLOS8N has a working Internet Connection first.
396 +(((
397 +Make sure your LPS8N has a working Internet Connection first.
398 +)))
354 354  
400 +(((
355 355  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
402 +)))
356 356  
357 -[[image:1652422624783-580.png||height="327" width="729"]]
404 +[[image:1657094183213-301.png]]
358 358  
359 359  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
360 360  
408 +
361 361  In the home page, we can see the LoRaWAN connection is ready now.
362 362  
363 -[[image:1652422685063-596.png||height="327" width="729"]]
411 +[[image:1657094202420-798.png]]
364 364  
413 +
365 365  In TTN v3 portal, we can also see the gateway is connected.
366 366  
367 -[[image:1652422703020-955.png||height="343" width="730"]]
416 +[[image:1657094221515-510.png]]
368 368  
369 369  
370 -== 4.3 Configure frequency ==
419 +== 4.3  Configure frequency ==
371 371  
372 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
421 +We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
373 373  
374 -[[image:1652422737399-529.png||height="362" width="737"]]
423 +[[image:1657094249818-468.png]]
375 375  
376 376  
377 377  In logread page, user can check the frequency actually used.
378 378  
379 - [[image:1652422763536-750.png||height="514" width="730"]]
428 + [[image:1657094333704-207.png]]
380 380  
381 381  
382 -4.4 Add a LoRaWAN End Device
431 +== 4.4  Add a LoRaWAN End Device ==
383 383  
433 +(((
384 384  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
435 +)))
385 385  
437 +(((
386 386  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
439 +)))
387 387  
388 388  [[image:1652422794767-871.png]]
389 389  
443 +(((
390 390  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
391 391  
446 +
447 +)))
448 +
449 +(((
392 392  Three codes are required to define the device in TTN v3:
451 +)))
393 393  
394 394  * DEV EUI - Unique ID code for a particular device.
395 395  * APP EUI - ID code for an Application defined in TTN v3.
396 396  * APP Key - Unique key to secure communications with a particular device.
397 397  
457 +(((
398 398  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
459 +)))
399 399  
400 -[[image:1652422840936-838.png]]
461 +[[image:1657094382177-591.png]]
401 401  
402 -
463 +(((
403 403  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
404 404  
466 +
467 +)))
468 +
469 +(((
405 405  For the TTN v3 server, you can use the codes set in the device as in the following example.
471 +)))
406 406  
473 +(((
407 407  Select **Add Application** to open the screen below.
475 +)))
408 408  
409 -[[image:1652422946999-255.png||height="356" width="744"]]
477 +[[image:1657094417175-831.png]]
410 410  
411 411  Open the **Application **select** Add end device**
412 412  
481 +
413 413  Start Register the end device
414 414  
415 -[[image:1652422975885-591.png||height="359" width="726"]]
484 +[[image:1657094444802-101.png]]
416 416  
486 +(((
417 417  Select OTAA activation mode
418 418  
489 +
490 +)))
419 419  
492 +(((
420 420  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
494 +)))
421 421  
422 -[[image:1652422998005-968.png||height="352" width="744"]]
496 +[[image:1657094475730-208.png]]
423 423  
424 424  First, input the End device ID, AppEUI and DevEUI.
425 425  
426 -[[image:1652423022781-339.png||height="365" width="741"]]
427 427  
501 +[[image:1657094646429-966.png]]
502 +
428 428  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
429 429  
430 -[[image:1652423046741-467.png||height="355" width="736"]]
431 431  
506 +[[image:1657094674045-755.png]]
507 +
508 +(((
432 432  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
510 +)))
433 433  
434 -
512 +(((
435 435  (% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
514 +)))
436 436  
516 +(((
437 437  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
518 +)))
438 438  
439 439  [[image:1652423277549-324.png||height="273" width="745"]]
440 440  
441 -
442 442  = 5. Web Configure Pages =
443 443  
444 444  == 5.1 Home ==
... ... @@ -447,39 +447,43 @@
447 447  
448 448  [[image:1652423418568-752.png||height="329" width="724"]]
449 449  
450 -
451 451  == 5.2 LoRa Settings ==
452 452  
453 453  === 5.2.1 LoRa ~-~-> LoRa ===
454 454  
534 +(((
455 455  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
536 +)))
456 456  
538 +(((
457 457  Different DLOS8N hardware version can support different frequency range:
540 +)))
458 458  
459 459  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
460 460  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
461 461  
545 +(((
462 462  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
547 +)))
463 463  
464 464  [[image:1652423554776-574.png||height="380" width="740"]]
465 465  
466 -Note *: See this instruction for how to customize frequency band:
551 +Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
467 467  
468 -[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
469 469  
470 -
471 471  === 5.2.2 LoRa ~-~-> ABP Decryption ===
472 472  
473 473  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
474 474  
475 475  * No internet connection.
476 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
559 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
477 477  
478 -Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
561 +(((
562 +Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
563 +)))
479 479  
480 480  [[image:1652423628833-467.png||height="357" width="755"]]
481 481  
482 -
483 483  == 5.3 LoRaWAN Settings ==
484 484  
485 485  === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
... ... @@ -494,36 +494,37 @@
494 494  
495 495  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
496 496  
497 -See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
581 +**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
498 498  
499 -
500 500  === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
501 501  
502 502  [[image:1652428499323-384.png||height="275" width="723"]]
503 503  
504 -Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
587 +(((
588 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
589 +)))
505 505  
506 -
507 507  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
508 508  
593 +(((
509 509  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
595 +)))
510 510  
511 -Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
597 +(((
598 +Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
599 +)))
512 512  
513 513  [[image:1652428648903-878.png||height="266" width="731"]]
514 514  
515 -
516 516  == 5.4 MQTT Settings ==
517 517  
518 518  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
519 519  
520 -Instruction:
607 +Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
521 521  
522 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
523 523  
524 524  [[image:1652428705046-212.png||height="417" width="733"]]
525 525  
526 -
527 527  == 5.5 System ==
528 528  
529 529  === 5.5.1 System ~-~-> System Overview ===
... ... @@ -532,59 +532,48 @@
532 532  
533 533  [[image:1652428773760-580.png||height="408" width="728"]]
534 534  
535 -
536 536  === 5.5.2 System ~-~-> General ( login settings) ===
537 537  
538 538  [[image:1652428861256-300.png||height="354" width="724"]]
539 539  
624 +(((
540 540  **__System Password:__**
626 +)))
541 541  
628 +(((
542 542  There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
630 +)))
543 543  
632 +(((
544 544  This page can be used to set the password for them.
634 +)))
545 545  
546 546  (((
547 -
637 +**__Timezone:__**Set device timezone.
548 548  )))
549 549  
550 -**__Timezone:__**
551 -
552 -Set device timezone.
553 -
554 554  (((
555 -
641 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
556 556  )))
557 557  
558 -**__Port forwarding:__**
559 -
560 -Enable/Disable the HTTP and SSH access via WAN interface.
561 -
562 -
563 563  === 5.5.3 System ~-~-> Network ===
564 564  
565 565  [[image:1652429149053-824.png||height="467" width="725"]]
566 566  
567 -**__LAN Settings:__**
648 +(((
649 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
650 +)))
568 568  
569 -When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
570 -
571 571  (((
572 -
653 +__**WAN Settings:**__Setting for DLOS8N WAN port
573 573  )))
574 574  
575 -__**WAN Settings:**__
576 -
577 -Setting for DLOS8N WAN port
578 -
579 579  (((
657 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
658 +
580 580  
581 581  )))
582 582  
583 -__**WiFi Settings:**__
584 -
585 -Setting for DLOS8N WiFi IP when use it as WiFi Client
586 -
587 -
588 588  === 5.5.4 System ~-~-> WiFi ===
589 589  
590 590  DLOS8N WiFi Settings.
... ... @@ -591,7 +591,6 @@
591 591  
592 592  [[image:1652429430767-921.png||height="367" width="723"]]
593 593  
594 -
595 595  === 5.5.5 System ~-~-> Cellular ===
596 596  
597 597  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
... ... @@ -600,12 +600,10 @@
600 600  
601 601  (% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
602 602  
603 -
604 604  === 5.5.6 System ~-~-> Network Status ===
605 605  
606 606  [[image:1652429486609-208.png||height="415" width="728"]]
607 607  
608 -
609 609  === 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
610 610  
611 611  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
... ... @@ -618,13 +618,13 @@
618 618  
619 619  Please see this document for detail:
620 620  
692 +(((
621 621  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
694 +)))
622 622  
623 623  
624 -R-SSH is for remote access device and management, introduction for how to use:
697 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
625 625  
626 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
627 -
628 628  [[image:1652429624400-864.png||height="432" width="716"]]
629 629  
630 630  
... ... @@ -640,10 +640,13 @@
640 640  
641 641  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
642 642  
643 -
714 +(((
644 644  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
716 +)))
645 645  
718 +(((
646 646  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
720 +)))
647 647  
648 648  [[image:1652429711145-862.png||height="270" width="737"]]
649 649  
... ... @@ -655,7 +655,6 @@
655 655  
656 656  [[image:1652429962190-224.png||height="358" width="729"]]
657 657  
658 -
659 659  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
660 660  
661 661  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -664,7 +664,6 @@
664 664  
665 665  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
666 666  
667 -
668 668  === 5.5.9 System ~-~-> Reboot/Reset ===
669 669  
670 670  [[image:1652430197132-330.png||height="256" width="724"]]
... ... @@ -679,22 +679,28 @@
679 679  
680 680  Place to show what package has installed and possible to upgrade packages.
681 681  
682 -(((
683 -
684 -)))
685 -
686 686  == 5.6 LogRead ==
687 687  
688 688  === 5.6.1 LogRead ~-~-> LoRa Log ===
689 689  
690 -[[image:1652430356784-567.png||height="325" width="730"]]
691 691  
692 692  Show the frequency for LoRa Radio and traffics.
693 693  
694 -(((
695 -
696 -)))
761 +[[image:image-20220615204306-1.png||height="575" width="733"]]
697 697  
763 +
764 +Show the IoT Server Connection State and FWD State
765 +
766 +[[image:image-20220616083933-1.png||height="556" width="729"]]
767 +
768 +DLOS8 can view GPS location in the Logread FWD State
769 +
770 +
771 +Show the Error logs, RxTxJson lorawan packages, and PULL State
772 +
773 +[[image:image-20220615205416-6.png||height="442" width="884"]]
774 +
775 +
698 698  === 5.6.2 LogRead ~-~-> System Log ===
699 699  
700 700  Show the system log
... ... @@ -701,16 +701,12 @@
701 701  
702 702  [[image:1652430369760-511.png||height="373" width="730"]]
703 703  
704 -
705 705  = 6. More features =
706 706  
707 707  == 6.1 More instructions ==
708 708  
709 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
786 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
710 710  
711 -(((
712 -
713 -)))
714 714  
715 715  = 7. Linux System =
716 716  
... ... @@ -739,13 +739,21 @@
739 739  
740 740  == 7.2 Edit and Transfer files ==
741 741  
816 +(((
742 742  The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
818 +)))
743 743  
820 +(((
744 744  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
822 +)))
745 745  
824 +(((
746 746  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
826 +)))
747 747  
828 +(((
748 748  Screenshot is as below:
830 +)))
749 749  
750 750  [[image:1652431650755-450.png]]
751 751  
... ... @@ -752,11 +752,17 @@
752 752  
753 753  == 7.3 File System ==
754 754  
837 +(((
755 755  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
839 +)))
756 756  
841 +(((
757 757  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
843 +)))
758 758  
845 +(((
759 759  You can use an external USB flash memory device to extend the size of flash memory for storage.
847 +)))
760 760  
761 761  
762 762  == 7.4 Package maintenance system ==
... ... @@ -763,9 +763,13 @@
763 763  
764 764  DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
765 765  
854 +(((
766 766  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
856 +)))
767 767  
858 +(((
768 768  **In Linux Console run:**
860 +)))
769 769  
770 770  (((
771 771  (% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
... ... @@ -817,21 +817,28 @@
817 817  
818 818  == 9.1 How can I configure for a customized frequency band? ==
819 819  
820 -See below link for how to customize frequency band:
912 +(((
913 +See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
914 +)))
821 821  
822 -[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
916 +(((
917 +
918 +)))
823 823  
824 -
825 825  == 9.2 Can I connect DLOS8N to LORIOT? ==
826 826  
827 -Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
922 +Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
828 828  
829 829  
830 830  == 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
831 831  
927 +(((
832 832  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
929 +)))
833 833  
931 +(((
834 834  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
933 +)))
835 835  
836 836  
837 837  == 9.4 Can I use 868Mhz version for 915Mhz bands? ==
... ... @@ -857,7 +857,9 @@
857 857  
858 858   (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
859 859  
959 +(((
860 860  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
961 +)))
861 861  
862 862  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
863 863  
... ... @@ -864,16 +864,21 @@
864 864  
865 865  == 10.2 How to recover the DLOS8N if the firmware crashes ==
866 866  
867 -Please follow this instruction to recover your gateway:
968 +(((
969 +Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
970 +)))
868 868  
869 -[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
972 +(((
973 +
974 +)))
870 870  
871 -
872 872  == 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
873 873  
874 874  [[image:1652435238615-272.png||height="247" width="727"]]
875 875  
980 +(((
876 876  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
982 +)))
877 877  
878 878  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
879 879  
... ... @@ -916,23 +916,26 @@
916 916  
917 917  = 12. Packing Info =
918 918  
1025 +(((
919 919  **Package Includes**:
1027 +)))
920 920  
921 921  * DLOS8N LoRaWAN Gateway x 1
922 922  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
923 923  * Packaging with environmental protection paper box
924 924  
1033 +(((
925 925  **Dimension and weight**:
1035 +)))
926 926  
927 927  * Device Size: 12 x 12 x 3 cm
928 928  * Weight: 187g
929 929  * Package Size: 14.5 x 13.5 x 6 cm
930 930  * Weight: 300g
931 -*
932 932  
933 933  = 13. Support =
934 934  
935 -* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1044 +* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
936 936  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
937 937  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
938 938  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652436675869-206.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1652436705761-420.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1652436787176-950.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.7 KB
Content
1656917428377-954.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.7 KB
Content
1656918270059-192.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.7 KB
Content
1657079015096-949.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +101.7 KB
Content
1657079055940-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +214.1 KB
Content
1657085974260-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
image-20220513184125-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +139.3 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.3 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0