Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 73.6 >
edited by Xiaoling
on 2022/05/13 18:00
To version < 18.1 >
edited by Xiaoling
on 2022/05/13 13:52
>
Change comment: Uploaded new attachment "1652421151598-130.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -19,15 +19,15 @@
19 19  
20 20  == 1.1 What is the DLOS8N ==
21 21  
22 -The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The DLOS8N is (% class="mark" %)an open source outdoor LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  
24 -DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
24 +DLOS8N (% class="mark" %)supports Semtech packet forwarder(%%) and (% class="mark" %)LoRaWAN Station connection(%%), it is fully compatible with LoRaWAN protocol. DLOS8N includes a(% class="mark" %) SX1302 LoRaWAN concentrator(%%).
25 25  
26 -DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
26 +DLOS8N has (% class="mark" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
27 27  
28 28  DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
29 29  
30 -DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
30 +DLOS8N supports (% class="mark" %)auto-provision(%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
31 31  
32 32  [[image:1652411526195-923.png]]
33 33  
... ... @@ -262,7 +262,7 @@
262 262  [[image:1652420606018-181.png]]
263 263  
264 264  
265 -[[image:1652420718132-929.png||height="450" width="766"]]
265 +[[image:1652420718132-929.png]]
266 266  
267 267  
268 268  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
... ... @@ -270,125 +270,158 @@
270 270  
271 271  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
272 272  
273 -[[image:1652421032117-341.png||height="329" width="752"]]
273 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
274 274  
275 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
275 +**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
276 276  
277 277  
278 -== 3.5 Check Internet connection ==
278 +1.
279 +11. Check Internet connection
279 279  
280 -In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
281 +In the **Home** page, we can check the Internet connection.
281 281  
282 -* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 -* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 -* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
283 +* GREEN Tick  [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]] : This interface has Internet connection.
284 +* Yellow Tick [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]] : This interface has IP address but don’t use it for internet connection.
285 +* RED Cross [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]] : This interface doesn’t connected.
285 285  
286 -[[image:1652421351382-793.png||height="339" width="765"]]
287 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
287 287  
288 288  
289 -= 4. Example: Configure as a LoRaWAN gateway =
290 290  
291 +
292 +
293 +1. Example: Configure as a LoRaWAN gateway
294 +
291 291  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
292 292  
293 -[[image:image-20220513140429-1.png||height="565" width="824"]]
294 294  
298 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
299 +
300 +
295 295  This chapter describes how to use the DLOS8Nto work with
296 296  
297 297  [[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
298 298  
299 299  
300 -== 4.1 Create a gateway in TTN V3 Server ==
301 301  
302 -(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
303 303  
308 +1.
309 +11. Create a gateway in TTN V3 Server
310 +
311 +**Step 1: Get a Unique gateway ID.**
312 +
304 304  Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
305 305  
306 -[[image:1652421929753-168.png||height="403" width="739"]]
307 307  
308 -The example gateway id is: a840411e96744154
316 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
309 309  
310 310  
311 -(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
319 +The example gateway id is: **a840411e96744154**
312 312  
321 +
322 +**Step 2: Sign up a user account in TTN server**
323 +
313 313  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
314 314  
315 -[[image:1652422127479-258.png||height="346" width="738"]]
326 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
316 316  
317 317  
318 -(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
319 319  
320 -[[image:1652422142236-792.png||height="356" width="737"]]
321 321  
322 322  
323 -(% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
324 324  
325 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
326 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
327 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
328 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
329 329  
330 -(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
334 +**Step 3: Choose the TTNv3 Cluster Picker**
331 331  
332 -[[image:1652422440891-514.png||height="360" width="747"]]
336 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
333 333  
338 +
339 +**Note: Choose the cluster corresponds to a specific Gateway server address**
340 +
341 +* Europe 1 **corresponding Gateway server address: **eu1.cloud.thethings.network
342 +* North America 1 **corresponding Gateway server address:** nam1.cloud.thethings.network
343 +* Australia 1 **corresponding Gateway server address:** au1.cloud.thethings.network
344 +* Legacy V2 Console : **TTN v2 shuts down in December 2021**
345 +
346 +**Step 4: Create a Gateway**
347 +
348 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
349 +
334 334  Click the Gateway icon and then click Add gateway.
335 335  
336 336  Open the following page:
337 337  
338 - [[image:1652422470352-518.png||height="391" width="716"]]
354 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
339 339  
340 -[[image:1652422479876-297.png||height="398" width="729"]]
356 +**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
341 341  
342 -(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
343 343  
359 +
344 344  After creating the gateway, you can see the gateway info, as below.
345 345  
346 -[[image:1652422509034-682.png||height="299" width="739"]]
362 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
347 347  
348 348  
349 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
365 +1.
366 +11. Configure DLOS8N to connect to TTN v3
350 350  
351 351  You can now configure the DLOS8N to let it connect to TTN network V3.
352 352  
353 353  Make sure your DLOS8N has a working Internet Connection first.
354 354  
355 -Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
356 356  
357 -[[image:1652422624783-580.png||height="327" width="729"]]
373 +Choose the right server provider and click **Save&Apply**
358 358  
359 -(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
375 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
360 360  
377 +
378 +
379 +**Note: **The server address must match the Gateway server address you choose in TTN V3.
380 +
381 +
361 361  In the home page, we can see the LoRaWAN connection is ready now.
362 362  
363 -[[image:1652422685063-596.png||height="327" width="729"]]
364 364  
385 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
386 +
387 +
388 +
365 365  In TTN v3 portal, we can also see the gateway is connected.
366 366  
367 -[[image:1652422703020-955.png||height="343" width="730"]]
391 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
368 368  
369 369  
370 -== 4.3 Configure frequency ==
371 371  
395 +
396 +1.
397 +11. Configure frequency
398 +
372 372  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
373 373  
374 -[[image:1652422737399-529.png||height="362" width="737"]]
401 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
375 375  
376 376  
377 377  In logread page, user can check the frequency actually used.
378 378  
379 - [[image:1652422763536-750.png||height="514" width="730"]]
406 + [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]
380 380  
381 381  
382 -4.4 Add a LoRaWAN End Device
383 383  
410 +
411 +1.
412 +11. Add a LoRaWAN End Device
413 +
384 384  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
385 385  
416 +
386 386  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
387 387  
388 -[[image:1652422794767-871.png]]
389 389  
390 -(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
420 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.jpg]]
391 391  
422 +**Step 1**: Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
423 +
424 +
392 392  Three codes are required to define the device in TTN v3:
393 393  
394 394  * DEV EUI - Unique ID code for a particular device.
... ... @@ -397,22 +397,26 @@
397 397  
398 398  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
399 399  
400 -[[image:1652422840936-838.png]]
401 401  
434 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]
402 402  
403 -(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
404 404  
437 +Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
438 +
439 +
405 405  For the TTN v3 server, you can use the codes set in the device as in the following example.
406 406  
442 +
407 407  Select **Add Application** to open the screen below.
408 408  
409 -[[image:1652422946999-255.png||height="356" width="744"]]
445 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
410 410  
411 411  Open the **Application **select** Add end device**
412 412  
449 +
413 413  Start Register the end device
414 414  
415 -[[image:1652422975885-591.png||height="359" width="726"]]
452 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image037.png]]
416 416  
417 417  Select OTAA activation mode
418 418  
... ... @@ -419,41 +419,52 @@
419 419  
420 420  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
421 421  
422 -[[image:1652422998005-968.png||height="352" width="744"]]
459 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image038.png]]
423 423  
424 424  First, input the End device ID, AppEUI and DevEUI.
425 425  
426 -[[image:1652423022781-339.png||height="365" width="741"]]
427 427  
464 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image039.png]]
465 +
428 428  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
429 429  
430 -[[image:1652423046741-467.png||height="355" width="736"]]
431 431  
469 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image040.png]]
470 +
432 432  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
433 433  
434 434  
435 -(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
474 +**Step 2**: Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
436 436  
437 -(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
438 438  
439 -[[image:1652423277549-324.png||height="273" width="745"]]
477 +Note that it may take some time for the device data to appear in the TTN v3 display.
440 440  
441 441  
442 -= 5. Web Configure Pages =
480 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image041.png]]
443 443  
444 -== 5.1 Home ==
445 445  
483 +
484 +
485 +
486 +1. Web Configure Pages
487 +
488 +1.
489 +11. Home
490 +
446 446  Shows the system running status.
447 447  
448 -[[image:1652423418568-752.png||height="329" width="724"]]
493 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image042.png]]
449 449  
450 450  
451 -== 5.2 LoRa Settings ==
452 452  
453 -=== 5.2.1 LoRa ~-~-> LoRa ===
454 454  
498 +1.
499 +11. LoRa Settings
500 +111. LoRa ~-~-> LoRa
501 +
455 455  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
456 456  
504 +
457 457  Different DLOS8N hardware version can support different frequency range:
458 458  
459 459  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -461,7 +461,7 @@
461 461  
462 462  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
463 463  
464 -[[image:1652423554776-574.png||height="380" width="740"]]
512 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image043.png]]
465 465  
466 466  Note *: See this instruction for how to customize frequency band:
467 467  
... ... @@ -468,53 +468,67 @@
468 468  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
469 469  
470 470  
471 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
472 472  
520 +1.
521 +11.
522 +111. LoRa ~-~-> ABP Decryption
523 +
473 473  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
474 474  
475 475  * No internet connection.
476 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
527 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>url:http://wiki.dragino.com/index.php?title=MQTT_Forward_Instruction]]).
477 477  
478 -Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
529 +Detail of this feature: [[http:~~/~~/wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node>>url:http://wiki.dragino.com/index.php?title=Communication_with_ABP_End_Node]]
479 479  
480 -[[image:1652423628833-467.png||height="357" width="755"]]
531 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image044.png]]
481 481  
482 482  
483 -== 5.3 LoRaWAN Settings ==
484 484  
485 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
535 +1.
536 +11. LoRaWAN Settings
537 +111. LoRaWAN ~-~-> LoRaWAN
486 486  
487 487  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
488 488  
489 -[[image:1652423628833-467.png||height="357" width="755"]]
541 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image045.png]]
490 490  
491 -(% style="color:red" %)**Note:**
543 +Note
492 492  
493 493  ~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
494 494  
495 495  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
496 496  
497 -See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
549 +See [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets>>url:http://wiki.dragino.com/index.php?title=Main_Page#Filter_unwanted_LoRaWAN_packets]]
498 498  
499 499  
500 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
501 501  
502 -[[image:1652428499323-384.png||height="275" width="723"]]
553 +1.
554 +11.
555 +111. LoRaWAN ~-~-> Amazon AWS-IoT
503 503  
557 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image046.png]]
558 +
504 504  Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
505 505  
506 506  
507 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
508 508  
563 +
564 +1.
565 +11.
566 +111. LoRaWAN ~-~-> LORIOT
567 +
509 509  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
510 510  
511 511  Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
512 512  
513 -[[image:1652428648903-878.png||height="266" width="731"]]
572 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image047.png]]
514 514  
515 515  
516 -== 5.4 MQTT Settings ==
517 517  
576 +
577 +1.
578 +11. MQTT Settings
579 +
518 518  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
519 519  
520 520  Instruction:
... ... @@ -521,100 +521,108 @@
521 521  
522 522  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
523 523  
524 -[[image:1652428705046-212.png||height="417" width="733"]]
525 525  
587 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image048.png]]
526 526  
527 -== 5.5 System ==
528 528  
529 -=== 5.5.1 System ~-~-> System Overview ===
590 +1.
591 +11. System
592 +111. System ~-~-> System Overview
530 530  
531 531  Shows the system info:
532 532  
533 -[[image:1652428773760-580.png||height="408" width="728"]]
596 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image049.png]]
534 534  
598 +1.
599 +11.
600 +111. System ~-~-> General ( login settings)
535 535  
536 -=== 5.5.2 System ~-~-> General ( login settings) ===
602 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image050.png]]
537 537  
538 -[[image:1652428861256-300.png||height="354" width="724"]]
604 +System Password:
539 539  
540 -**__System Password:__**
606 +There are two login for DLOS8N: root /dragino or admin /dragino. Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
541 541  
542 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
543 -
544 544  This page can be used to set the password for them.
545 545  
546 -(((
547 -
548 -)))
549 549  
550 -**__Timezone:__**
611 +Timezone:
551 551  
552 552  Set device timezone.
553 553  
554 -(((
555 -
556 -)))
557 557  
558 -**__Port forwarding:__**
616 +Port forwarding:
559 559  
560 560  Enable/Disable the HTTP and SSH access via WAN interface.
561 561  
562 562  
563 -=== 5.5.3 System ~-~-> Network ===
564 564  
565 -[[image:1652429149053-824.png||height="467" width="725"]]
566 566  
567 -**__LAN Settings:__**
623 +1.
624 +11.
625 +111. System ~-~-> Network
568 568  
627 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image051.png]]
628 +
629 +LAN Settings:
630 +
569 569  When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
570 570  
571 -(((
572 -
573 -)))
574 574  
575 -__**WAN Settings:**__
634 +WAN Settings:
576 576  
577 577  Setting for DLOS8N WAN port
578 578  
579 -(((
580 -
581 -)))
582 582  
583 -__**WiFi Settings:**__
639 +WiFi Settings:
584 584  
585 585  Setting for DLOS8N WiFi IP when use it as WiFi Client
586 586  
587 587  
588 -=== 5.5.4 System ~-~-> WiFi ===
589 589  
645 +
646 +
647 +1.
648 +11.
649 +111. System ~-~-> WiFi
650 +
590 590  DLOS8N WiFi Settings.
591 591  
592 -[[image:1652429430767-921.png||height="367" width="723"]]
653 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image052.png]]
593 593  
594 594  
595 -=== 5.5.5 System ~-~-> Cellular ===
656 +1.
657 +11.
658 +111. System ~-~-> Cellular
596 596  
597 597  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
598 598  
599 -[[image:1652429309615-825.png||height="320" width="732"]]
662 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
600 600  
601 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
664 +Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
602 602  
603 603  
604 -=== 5.5.6 System ~-~-> Network Status ===
605 605  
606 -[[image:1652429486609-208.png||height="415" width="728"]]
607 607  
669 +1.
670 +11.
671 +111. System ~-~-> Network Status
608 608  
609 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
673 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image053.png]]
610 610  
675 +
676 +
677 +1.
678 +11.
679 +111. System ~-~-> Remote Mgnt & Auto Provision
680 +
611 611  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
612 612  
613 -[[image:1652429518191-846.png||height="332" width="733"]]
683 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image054.png]]
614 614  
615 -[[image:1652429527544-247.png||height="327" width="724"]]
685 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image055.png]]
616 616  
617 -[[image:1652429537849-154.png||height="339" width="722"]]
687 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image056.png]]
618 618  
619 619  Please see this document for detail:
620 620  
... ... @@ -625,10 +625,12 @@
625 625  
626 626  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
627 627  
628 -[[image:1652429624400-864.png||height="432" width="716"]]
698 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image057.png]]
629 629  
630 630  
631 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
701 +1.
702 +11.
703 +111. System ~-~-> Firmware Upgrade
632 632  
633 633  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
634 634  
... ... @@ -641,182 +641,198 @@
641 641  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
642 642  
643 643  
644 -The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
716 +The file named as **xxxxx–xxxxx-squashfs-sysupgrade.bin **is the upgrade Image. There are different methods to upgrade, as below.
645 645  
646 -(% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
647 647  
648 -[[image:1652429711145-862.png||height="270" width="737"]]
719 +**Web à System à Firmware Upgrade**
649 649  
721 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image058.png]]
650 650  
723 +
651 651  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
652 652  
653 -(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
654 654  
727 +**NOTE**: You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
728 +
729 +
730 +
731 +
655 655  The system will automatically boot into the new firmware after upgrade.
656 656  
657 -[[image:1652429962190-224.png||height="358" width="729"]]
658 658  
735 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image059.png]]
659 659  
660 -(% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
661 661  
662 -SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
738 +Note *: User can also upgrade firmware via Linux console
663 663  
664 -(% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
740 +SCP the firmware to the system** /var** directory and then run
665 665  
666 -(% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
742 +**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
667 667  
668 668  
669 -=== 5.5.9 System ~-~-> Reboot/Reset ===
745 +**NOTE**: it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
670 670  
671 -[[image:1652430197132-330.png||height="256" width="724"]]
672 672  
748 +1.
749 +11.
750 +111. System ~-~-> Reboot/Reset
673 673  
674 -=== 5.5.10 System ~-~-> Package Maintain ===
752 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image060.png]]
675 675  
676 -[[image:1652430243826-126.png||height="289" width="723"]]
677 677  
755 +
756 +1.
757 +11.
758 +111. System ~-~-> Package Maintain
759 +
760 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image061.png]]
761 +
678 678  Place to show what package has installed and possible to upgrade packages.
679 679  
680 680  
681 -== 5.6 LogRead ==
682 682  
683 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
684 684  
685 -[[image:1652430356784-567.png||height="325" width="730"]]
767 +1.
768 +11. LogRead
769 +111. LogRead ~-~-> LoRa Log
686 686  
771 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image062.png]]
772 +
687 687  Show the frequency for LoRa Radio and traffics.
688 688  
689 689  
690 -=== 5.6.2 LogRead ~-~-> System Log ===
776 +1.
777 +11.
778 +111. LogRead ~-~-> System Log
691 691  
692 692  Show the system log
693 693  
694 -[[image:1652430369760-511.png||height="373" width="730"]]
782 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image063.png]]
695 695  
696 696  
697 -= 6. More features =
698 698  
699 -== 6.1 More instructions ==
786 +1. More features
787 +11. More instructions
700 700  
701 701  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
702 702  
703 703  
704 -= 7. Linux System =
705 705  
793 +
794 +1. Linux System
795 +
706 706  The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
707 707  
708 -== 7.1 SSH Access for Linux console ==
798 +1.
799 +11. SSH Access for Linux console
709 709  
710 710  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
711 711  
803 +
712 712  IP address:  IP address of DLOS8N
713 713  
714 714  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
715 715  
716 -User Name:      (% style="color:green" %)**root**
808 +User Name:      **root**
717 717  
718 -Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
810 +Password:         **dragino** (default)
719 719  
812 +
720 720  After logging in, you will be in the Linux console and can enter commands as shown below.
721 721  
722 -[[image:1652431588565-830.png]]
723 723  
724 -The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
816 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image064.png]]
725 725  
726 -[[image:1652431609193-637.png||height="214" width="732"]]
727 727  
819 +The “logread -f” command can be used to debug how system runs.
728 728  
729 -== 7.2 Edit and Transfer files ==
821 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image065.png]]
730 730  
731 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
732 732  
824 +
825 +
826 +1.
827 +11. Edit and Transfer files
828 +
829 +The DLOS8N supports the **SCP protocol** and has a built-in **SFTP server**. There are many ways to edit and transfer files using these protocols.
830 +
831 +
733 733  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
734 734  
735 735  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
736 736  
836 +
737 737  Screenshot is as below:
738 738  
739 -[[image:1652431650755-450.png]]
839 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.png]]
740 740  
741 741  
742 -== 7.3 File System ==
842 +1.
843 +11. File System
743 743  
744 744  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
745 745  
847 +
746 746  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
747 747  
748 748  You can use an external USB flash memory device to extend the size of flash memory for storage.
749 749  
750 750  
751 -== 7.4 Package maintenance system ==
752 752  
753 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
754 754  
755 -Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
855 +1.
856 +11. Package maintenance system
756 756  
757 -**In Linux Console run:**
858 +DLOS8N uses the OpenWrt [[OPKG package maint>>url:https://wiki.openwrt.org/doc/techref/opkg]][[e>>url:https://wiki.openwrt.org/doc/techref/opkg]][[n>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ance>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ system>>url:https://wiki.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
758 758  
759 -(((
760 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
761 -)))
762 762  
763 -(((
764 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
765 -)))
861 +Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>url:https://wiki.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/wiki.openwrt.org/doc/techref/opkg>>url:https://wiki.openwrt.org/doc/techref/opkg]])
766 766  
767 -(((
768 -(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
769 -)))
770 770  
771 -The system will automatically install the required packages as shown below.
864 +In Linux Console run:
772 772  
866 +**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
773 773  
774 -(((
775 -(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
776 -)))
868 +**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
777 777  
778 -(((
779 -(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
780 -)))
870 +**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
781 781  
782 -(((
783 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
784 -)))
872 +The system will automatically install the required packages as shown below.
785 785  
786 -(((
787 -(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
788 -)))
789 789  
790 -(((
791 -(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
792 -)))
875 +//root@dragino-169d30:/etc/opkg# opkg install iperf//
793 793  
794 -(((
795 -(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
796 -)))
877 +//Installing iperf (2.0.12-1) to root…//
797 797  
798 -(((
799 -(% style="background-color:#dcdcdc" %)//Configuring iperf.//
800 -)))
879 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
801 801  
802 -= 8. Upgrade Linux Firmware =
881 +//Installing uclibcxx (0.2.4-3) to root…//
803 803  
883 +//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
804 804  
805 -= 9. FAQ =
885 +//Configuring uclibcxx.//
806 806  
807 -== 9.1 How can I configure for a customized frequency band? ==
887 +//Configuring iperf.//
808 808  
889 +
890 +1. Upgrade Linux Firmware
891 +
892 +1. FAQ
893 +11. How can I configure for a customized frequency band?
894 +
809 809  See below link for how to customize frequency band:
810 810  
811 811  [[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
812 812  
813 813  
814 -== 9.2 Can I connect DLOS8N to LORIOT? ==
900 +1.
901 +11. Can I connect DLOS8N to LORIOT?
815 815  
816 816  Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
817 817  
818 818  
819 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
906 +1.
907 +11. Can I make my own firmware for the gateway, where can I find the source code?
820 820  
821 821  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
822 822  
... ... @@ -823,35 +823,40 @@
823 823  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
824 824  
825 825  
826 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
914 +1.
915 +11. Can I use 868Mhz version for 915Mhz bands?
827 827  
828 828  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
829 829  
830 830  
831 -= 10. Trouble Shooting =
832 832  
833 -== 10.1 I get kernel error when install new package, how to fix? ==
834 834  
922 +1. Trouble Shooting
923 +11. I get kernel error when install new package, how to fix?
924 +
835 835  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
836 836  
837 -(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
838 838  
839 -(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
928 +root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
840 840  
841 -(% style="background-color:yellow" %)Collected errors:
930 +Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
842 842  
843 -(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
932 +Collected errors:
844 844  
845 -(% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
934 +~* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
846 846  
847 - (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
936 +*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
848 848  
938 + ~* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
939 +
940 +
849 849  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
850 850  
851 -(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
943 +Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
852 852  
853 853  
854 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
946 +1.
947 +11. How to recover the DLOS8N if the firmware crashes
855 855  
856 856  Please follow this instruction to recover your gateway:
857 857  
... ... @@ -858,53 +858,59 @@
858 858  [[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
859 859  
860 860  
861 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
862 862  
863 -[[image:1652435238615-272.png||height="247" width="727"]]
864 864  
956 +
957 +1.
958 +11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
959 +
960 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
961 +
865 865  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
866 866  
867 -(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
964 +(Note: fallback IP can be disabled in the WAN and DHCP page)
868 868  
869 869  
870 870  Steps to connect via fall back IP:
871 871  
872 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
969 +1. Connect PC’s Ethernet port to DLOS8N’s WAN port
970 +1. Configure PC’s Ethernet port has
971 +IP: 172.31.255.253 and
972 +Netmask: 255.255.255.252
873 873  
874 -2. Configure PC’s Ethernet port has
875 - IP: 172.31.255.253 and
876 - Netmask: 255.255.255.252
877 -
878 878  As below photo:
879 879  
880 -[[image:1652435256286-879.png]]
976 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
881 881  
882 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
978 +1. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
883 883  
884 884  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
885 885  
886 886  
887 -= 11. Order Info =
888 888  
889 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
984 +1. Order Info
890 890  
891 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
986 +**//PART: DLOS8N-XXX-YYY//:**
892 892  
893 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
894 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
988 +**//XXX: Frequency Band//**
895 895  
896 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
990 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
991 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
897 897  
898 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
899 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
900 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
901 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
993 +**//YYY: 4G Cellular Option//**
902 902  
995 +* **E**: EMEA, Korea, Thailand, India.
996 +* **A**: North America/ Rogers/AT&T/T-Mobile.
997 +* **AU**: Latin America, New Zeland, Taiwan
998 +* **J**: Japan, DOCOMO/SoftBank/ KDDI
999 +
903 903  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
904 904  
905 905  
906 -= 12. Packing Info =
907 907  
1004 +
1005 +1. Packing Info
1006 +
908 908  **Package Includes**:
909 909  
910 910  * DLOS8N LoRaWAN Gateway x 1
... ... @@ -917,11 +917,12 @@
917 917  * Weight: 187g
918 918  * Package Size: 14.5 x 13.5 x 6 cm
919 919  * Weight: 300g
920 -*
921 921  
922 -= 13. Support =
1020 +1. Support
923 923  
924 924  * Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
925 925  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
926 926  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
927 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1025 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
1026 +
1027 +[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652421168047-470.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1652421179500-890.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
1652421351382-793.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -205.6 KB
Content
1652421929753-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1652422127479-258.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1652422142236-792.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1652422440891-514.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1652422470352-518.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.9 KB
Content
1652422479876-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
1652422509034-682.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1652422624783-580.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1652422685063-596.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -169.5 KB
Content
1652422703020-955.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1652422737399-529.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1652422763536-750.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1652422794767-871.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1652422840936-838.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1652422946999-255.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1652422975885-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1652422998005-968.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1652423022781-339.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1652423046741-467.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1652423277549-324.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1652423418568-752.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -178.5 KB
Content
1652423554776-574.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -125.7 KB
Content
1652423628833-467.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
1652428499323-384.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
1652428648903-878.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
1652428705046-212.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -102.2 KB
Content
1652428773760-580.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.8 KB
Content
1652428861256-300.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -52.8 KB
Content
1652429149053-824.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.8 KB
Content
1652429273783-461.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.5 KB
Content
1652429309615-825.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1652429430767-921.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.5 KB
Content
1652429486609-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.5 KB
Content
1652429518191-846.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -80.4 KB
Content
1652429527544-247.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -89.6 KB
Content
1652429537849-154.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -107.5 KB
Content
1652429624400-864.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
1652429711145-862.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1652429962190-224.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1652430197132-330.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.2 KB
Content
1652430243826-126.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
1652430356784-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1652430369760-511.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1652430800213-833.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431153457-839.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652431569353-626.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431588565-830.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1652431609193-637.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1652431650755-450.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1652435238615-272.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content
1652435256286-879.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -111.5 KB
Content
image-20220513140429-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -116.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0