Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 69.1 >
edited by Xiaoling
on 2022/05/13 16:46
To version < 94.2 >
edited by Xiaoling
on 2022/07/04 15:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -DLOS8N
1 +LPS8N - LoRaWAN Gateway User Manual
Content
... ... @@ -1,42 +3,51 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:1652409757234-446.png]]
2 +[[image:1656917428377-954.png||height="475" width="475"]]
5 5  
6 6  
7 7  
8 -**DLOS8N Outdoor LoRaWAN Gateway User Manual**
9 9  
7 +**Table of Contents：**
10 10  
11 -Table of Contents
12 12  
13 -{{toc/}}
14 14  
15 15  
16 16  
17 17  
18 -= 1. Introduction =
19 19  
20 -== 1.1 What is the DLOS8N ==
21 21  
22 -The DLOS8N is (% class="mark" %)an open source outdoor LoRaWAN Gateway(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  
24 -DLOS8N (% class="mark" %)supports Semtech packet forwarder(%%) and (% class="mark" %)LoRaWAN Station connection(%%), it is fully compatible with LoRaWAN protocol. DLOS8N includes a(% class="mark" %) SX1302 LoRaWAN concentrator(%%).
25 25  
26 -DLOS8N has (% class="mark" %)pre-configured standard LoRaWAN frequency bands(%%) to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
27 27  
28 -DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
29 29  
30 -DLOS8N supports (% class="mark" %)auto-provision(%%) for mass deployment and long term maintain. System intergrator can easily change the settings.
31 31  
32 -[[image:1652411526195-923.png]]
21 +(% style="color:inherit; font-family:inherit; font-size:29px" %)1. Introduction
33 33  
23 +== 1.1 What is the LPS8N ==
34 34  
25 +
26 +
27 +The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
28 +
29 +The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
30 +
31 +LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
32 +
33 +LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
34 +
35 +
36 +(((
37 +
38 +)))
39 +
40 +[[image:1652411526195-923.png||height="494" width="731"]]
41 +
35 35  == 1.2 Specifications ==
36 36  
37 37  **Hardware System:**
38 38  
46 +(((
39 39   Linux Part:
48 +)))
40 40  
41 41  * 400Mhz ar9331 processor
42 42  * 64MB RAM
... ... @@ -117,14 +117,12 @@
117 117  
118 118  == 1.4 Hardware System Structure ==
119 119  
120 -[[image:1652411641871-482.png||height="425" width="732"]]
129 +[[image:1652411641871-482.png||height="416" width="716"]]
121 121  
122 -
123 123  == 1.5 DLOS8N Applications ==
124 124  
125 125  [[image:1652411671209-920.png||height="618" width="650"]]
126 126  
127 -
128 128  == 1.6 LED Indicators ==
129 129  
130 130  [[image:1652411720670-489.png]]
... ... @@ -147,7 +147,6 @@
147 147  )))
148 148  )))
149 149  
150 -
151 151  == 1.7 WiFi Direction ==
152 152  
153 153  DLOS8N use directional WiFi Antenna. The best direction is as below:
... ... @@ -154,7 +154,6 @@
154 154  
155 155  [[image:1652412859663-161.png||height="341" width="333"]]
156 156  
157 -
158 158  = 2. Access and Configure DLOS8N =
159 159  
160 160  The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
... ... @@ -165,7 +165,6 @@
165 165  
166 166  [[image:1652412985720-934.png]]
167 167  
168 -
169 169  At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
170 170  
171 171  [[image:1652413127647-377.png]]
... ... @@ -172,17 +172,19 @@
172 172  
173 173  (% style="background-color:#ffffcc" %)dragino+dragino
174 174  
179 +(((
175 175  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
181 +)))
176 176  
177 -
178 178  === 2.1.2 Connect via Ethernet with DHCP IP from router ===
179 179  
180 180  [[image:1652414114583-532.png]]
181 181  
182 182  
188 +(((
183 183  Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
190 +)))
184 184  
185 -
186 186  === 2.1.3 Connect via WiFi with DHCP IP from router ===
187 187  
188 188  [[image:1652414137639-956.png]]
... ... @@ -190,12 +190,10 @@
190 190  
191 191  If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
192 192  
193 -
194 194  === 2.1.4 Connect via Ethernet with fall back ip ===
195 195  
196 196  The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
197 197  
198 -
199 199  == 2.2 Access Configure Web UI ==
200 200  
201 201  **Web Interface**
... ... @@ -219,9 +219,6 @@
219 219  
220 220  [[image:1652414287022-223.png]]
221 221  
222 -
223 -
224 -
225 225  = 3. Typical Network Setup =
226 226  
227 227  == 3.1 Overview ==
... ... @@ -239,75 +239,85 @@
239 239  
240 240  [[image:1652420169255-959.png]]
241 241  
242 -
243 243  == 3.3 Access the Internet as a WiFi Client ==
244 244  
245 245  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
246 246  
247 +(((
247 247  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
249 +)))
248 248  
249 249  [[image:1652420327792-211.png]]
250 250  
251 -
253 +(((
252 252  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
255 +)))
253 253  
254 -
255 255  == 3.4 Access the Internet via Cellular ==
256 256  
257 257  If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
258 258  
259 -
261 +(((
260 260  First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
263 +)))
261 261  
262 262  [[image:1652420606018-181.png]]
263 263  
264 264  
265 -[[image:1652420718132-929.png||height="450" width="766"]]
268 +(((
269 +[[image:1652420718132-929.png||height="427" width="727"]]
270 +)))
266 266  
267 -
272 +(((
268 268  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
274 +)))
269 269  
270 -
276 +(((
271 271  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
278 +)))
272 272  
280 +(((
273 273  [[image:1652421032117-341.png||height="329" width="752"]]
282 +)))
274 274  
275 275  (% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
276 276  
277 -
278 278  == 3.5 Check Internet connection ==
279 279  
280 280  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
281 281  
282 -* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 -* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 -* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
290 +* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
291 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
292 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
285 285  
286 286  [[image:1652421351382-793.png||height="339" width="765"]]
287 287  
288 -
289 289  = 4. Example: Configure as a LoRaWAN gateway =
290 290  
291 291  DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
292 292  
300 +(((
293 293  [[image:image-20220513140429-1.png||height="565" width="824"]]
302 +)))
294 294  
295 295  This chapter describes how to use the DLOS8Nto work with
296 296  
297 -[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
306 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
298 298  
299 -
300 300  == 4.1 Create a gateway in TTN V3 Server ==
301 301  
302 302  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
303 303  
312 +(((
304 304  Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
314 +)))
305 305  
316 +(((
306 306  [[image:1652421929753-168.png||height="403" width="739"]]
318 +)))
307 307  
308 -The example gateway id is: a840411e96744154
320 +The example gateway id is: **a840411e96744154**
309 309  
310 -
311 311  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
312 312  
313 313  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -314,12 +314,12 @@
314 314  
315 315  [[image:1652422127479-258.png||height="346" width="738"]]
316 316  
317 -
318 318  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
319 319  
330 +(((
320 320  [[image:1652422142236-792.png||height="356" width="737"]]
332 +)))
321 321  
322 -
323 323  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
324 324  
325 325  * Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
... ... @@ -339,20 +339,27 @@
339 339  
340 340  [[image:1652422479876-297.png||height="398" width="729"]]
341 341  
353 +(((
342 342  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
355 +)))
343 343  
344 344  After creating the gateway, you can see the gateway info, as below.
345 345  
346 346  [[image:1652422509034-682.png||height="299" width="739"]]
347 347  
348 -
349 349  == 4.2 Configure DLOS8N to connect to TTN v3 ==
350 350  
363 +(((
351 351  You can now configure the DLOS8N to let it connect to TTN network V3.
365 +)))
352 352  
367 +(((
353 353  Make sure your DLOS8N has a working Internet Connection first.
369 +)))
354 354  
371 +(((
355 355  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
373 +)))
356 356  
357 357  [[image:1652422624783-580.png||height="327" width="729"]]
358 358  
... ... @@ -366,7 +366,6 @@
366 366  
367 367  [[image:1652422703020-955.png||height="343" width="730"]]
368 368  
369 -
370 370  == 4.3 Configure frequency ==
371 371  
372 372  We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
... ... @@ -378,33 +378,47 @@
378 378  
379 379   [[image:1652422763536-750.png||height="514" width="730"]]
380 380  
398 +== 4.4 Add a LoRaWAN End Device ==
381 381  
382 -4.4 Add a LoRaWAN End Device
383 -
400 +(((
384 384  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
402 +)))
385 385  
404 +(((
386 386  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
406 +)))
387 387  
388 388  [[image:1652422794767-871.png]]
389 389  
410 +(((
390 390  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
412 +)))
391 391  
414 +(((
392 392  Three codes are required to define the device in TTN v3:
416 +)))
393 393  
394 394  * DEV EUI - Unique ID code for a particular device.
395 395  * APP EUI - ID code for an Application defined in TTN v3.
396 396  * APP Key - Unique key to secure communications with a particular device.
397 397  
422 +(((
398 398  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
424 +)))
399 399  
400 400  [[image:1652422840936-838.png]]
401 401  
402 -
428 +(((
403 403  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
430 +)))
404 404  
432 +(((
405 405  For the TTN v3 server, you can use the codes set in the device as in the following example.
434 +)))
406 406  
436 +(((
407 407  Select **Add Application** to open the screen below.
438 +)))
408 408  
409 409  [[image:1652422946999-255.png||height="356" width="744"]]
410 410  
... ... @@ -414,10 +414,13 @@
414 414  
415 415  [[image:1652422975885-591.png||height="359" width="726"]]
416 416  
448 +(((
417 417  Select OTAA activation mode
450 +)))
418 418  
419 -
452 +(((
420 420  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
454 +)))
421 421  
422 422  [[image:1652422998005-968.png||height="352" width="744"]]
423 423  
... ... @@ -429,16 +429,20 @@
429 429  
430 430  [[image:1652423046741-467.png||height="355" width="736"]]
431 431  
466 +(((
432 432  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
468 +)))
433 433  
434 -
470 +(((
435 435  (% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
472 +)))
436 436  
474 +(((
437 437  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
476 +)))
438 438  
439 439  [[image:1652423277549-324.png||height="273" width="745"]]
440 440  
441 -
442 442  = 5. Web Configure Pages =
443 443  
444 444  == 5.1 Home ==
... ... @@ -447,39 +447,43 @@
447 447  
448 448  [[image:1652423418568-752.png||height="329" width="724"]]
449 449  
450 -
451 451  == 5.2 LoRa Settings ==
452 452  
453 453  === 5.2.1 LoRa ~-~-> LoRa ===
454 454  
492 +(((
455 455  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
494 +)))
456 456  
496 +(((
457 457  Different DLOS8N hardware version can support different frequency range:
498 +)))
458 458  
459 459  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
460 460  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
461 461  
503 +(((
462 462  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
505 +)))
463 463  
464 464  [[image:1652423554776-574.png||height="380" width="740"]]
465 465  
466 -Note *: See this instruction for how to customize frequency band:
509 +Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
467 467  
468 -[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
469 469  
470 -
471 471  === 5.2.2 LoRa ~-~-> ABP Decryption ===
472 472  
473 473  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
474 474  
475 475  * No internet connection.
476 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
517 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
477 477  
478 -Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
519 +(((
520 +Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
521 +)))
479 479  
480 480  [[image:1652423628833-467.png||height="357" width="755"]]
481 481  
482 -
483 483  == 5.3 LoRaWAN Settings ==
484 484  
485 485  === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
... ... @@ -494,36 +494,37 @@
494 494  
495 495  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
496 496  
497 -See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
539 +**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
498 498  
499 -
500 500  === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
501 501  
502 502  [[image:1652428499323-384.png||height="275" width="723"]]
503 503  
504 -Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
545 +(((
546 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
547 +)))
505 505  
506 -
507 507  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
508 508  
551 +(((
509 509  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
553 +)))
510 510  
511 -Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
555 +(((
556 +Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
557 +)))
512 512  
513 513  [[image:1652428648903-878.png||height="266" width="731"]]
514 514  
515 -
516 516  == 5.4 MQTT Settings ==
517 517  
518 518  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
519 519  
520 -Instruction:
565 +Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
521 521  
522 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
523 523  
524 524  [[image:1652428705046-212.png||height="417" width="733"]]
525 525  
526 -
527 527  == 5.5 System ==
528 528  
529 529  === 5.5.1 System ~-~-> System Overview ===
... ... @@ -532,59 +532,48 @@
532 532  
533 533  [[image:1652428773760-580.png||height="408" width="728"]]
534 534  
535 -
536 536  === 5.5.2 System ~-~-> General ( login settings) ===
537 537  
538 538  [[image:1652428861256-300.png||height="354" width="724"]]
539 539  
582 +(((
540 540  **__System Password:__**
584 +)))
541 541  
586 +(((
542 542  There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
588 +)))
543 543  
590 +(((
544 544  This page can be used to set the password for them.
592 +)))
545 545  
546 546  (((
547 -
595 +**__Timezone:__**Set device timezone.
548 548  )))
549 549  
550 -**__Timezone:__**
551 -
552 -Set device timezone.
553 -
554 554  (((
555 -
599 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
556 556  )))
557 557  
558 -**__Port forwarding:__**
559 -
560 -Enable/Disable the HTTP and SSH access via WAN interface.
561 -
562 -
563 563  === 5.5.3 System ~-~-> Network ===
564 564  
565 565  [[image:1652429149053-824.png||height="467" width="725"]]
566 566  
567 -**__LAN Settings:__**
606 +(((
607 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
608 +)))
568 568  
569 -When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
570 -
571 571  (((
572 -
611 +__**WAN Settings:**__Setting for DLOS8N WAN port
573 573  )))
574 574  
575 -__**WAN Settings:**__
576 -
577 -Setting for DLOS8N WAN port
578 -
579 579  (((
615 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
616 +
580 580  
581 581  )))
582 582  
583 -__**WiFi Settings:**__
584 -
585 -Setting for DLOS8N WiFi IP when use it as WiFi Client
586 -
587 -
588 588  === 5.5.4 System ~-~-> WiFi ===
589 589  
590 590  DLOS8N WiFi Settings.
... ... @@ -591,7 +591,6 @@
591 591  
592 592  [[image:1652429430767-921.png||height="367" width="723"]]
593 593  
594 -
595 595  === 5.5.5 System ~-~-> Cellular ===
596 596  
597 597  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
... ... @@ -600,12 +600,10 @@
600 600  
601 601  (% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
602 602  
603 -
604 604  === 5.5.6 System ~-~-> Network Status ===
605 605  
606 606  [[image:1652429486609-208.png||height="415" width="728"]]
607 607  
608 -
609 609  === 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
610 610  
611 611  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
... ... @@ -618,13 +618,13 @@
618 618  
619 619  Please see this document for detail:
620 620  
650 +(((
621 621  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
652 +)))
622 622  
623 623  
624 -R-SSH is for remote access device and management, introduction for how to use:
655 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
625 625  
626 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
627 -
628 628  [[image:1652429624400-864.png||height="432" width="716"]]
629 629  
630 630  
... ... @@ -640,14 +640,16 @@
640 640  
641 641  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
642 642  
643 -
672 +(((
644 644  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
674 +)))
645 645  
676 +(((
646 646  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
678 +)))
647 647  
648 648  [[image:1652429711145-862.png||height="270" width="737"]]
649 649  
650 -
651 651  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
652 652  
653 653  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -656,7 +656,6 @@
656 656  
657 657  [[image:1652429962190-224.png||height="358" width="729"]]
658 658  
659 -
660 660  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
661 661  
662 662  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -665,11 +665,13 @@
665 665  
666 666  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
667 667  
668 -
669 669  === 5.5.9 System ~-~-> Reboot/Reset ===
670 670  
671 671  [[image:1652430197132-330.png||height="256" width="724"]]
672 672  
702 +(((
703 +
704 +)))
673 673  
674 674  === 5.5.10 System ~-~-> Package Maintain ===
675 675  
... ... @@ -677,16 +677,28 @@
677 677  
678 678  Place to show what package has installed and possible to upgrade packages.
679 679  
680 -
681 681  == 5.6 LogRead ==
682 682  
683 683  === 5.6.1 LogRead ~-~-> LoRa Log ===
684 684  
685 -[[image:1652430356784-567.png||height="325" width="730"]]
686 686  
687 687  Show the frequency for LoRa Radio and traffics.
688 688  
719 +[[image:image-20220615204306-1.png||height="575" width="733"]]
689 689  
721 +
722 +Show the IoT Server Connection State and FWD State
723 +
724 +[[image:image-20220616083933-1.png||height="556" width="729"]]
725 +
726 +DLOS8 can view GPS location in the Logread FWD State
727 +
728 +
729 +Show the Error logs, RxTxJson lorawan packages, and PULL State
730 +
731 +[[image:image-20220615205416-6.png||height="442" width="884"]]
732 +
733 +
690 690  === 5.6.2 LogRead ~-~-> System Log ===
691 691  
692 692  Show the system log
... ... @@ -693,12 +693,11 @@
693 693  
694 694  [[image:1652430369760-511.png||height="373" width="730"]]
695 695  
696 -
697 697  = 6. More features =
698 698  
699 699  == 6.1 More instructions ==
700 700  
701 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
744 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
702 702  
703 703  
704 704  = 7. Linux System =
... ... @@ -709,200 +709,245 @@
709 709  
710 710  User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
711 711  
712 -
713 713  IP address:  IP address of DLOS8N
714 714  
715 715  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
716 716  
717 -User Name:      **(% style="color:green" %)root**
759 +User Name:      (% style="color:green" %)**root**
718 718  
719 -Password:         **(% style="color:green" %)dragino** (% style="color:black" %)(default)
761 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
720 720  
721 -
722 722  After logging in, you will be in the Linux console and can enter commands as shown below.
723 723  
724 -The “logread -f” command can be used to debug how system runs.
765 +[[image:1652431588565-830.png]]
725 725  
726 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image065.png]]
767 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
727 727  
769 +[[image:1652431609193-637.png||height="214" width="732"]]
770 +
771 +
728 728  == 7.2 Edit and Transfer files ==
729 729  
730 -The DLOS8N supports the **(% style="color:green" %)SCP protocol** (% style="color:black" %)and has a built-in **(% style="color:green" %)SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
774 +(((
775 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
776 +)))
731 731  
778 +(((
732 732  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
780 +)))
733 733  
782 +(((
734 734  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
784 +)))
735 735  
786 +(((
736 736  Screenshot is as below:
788 +)))
737 737  
738 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image066.png]]
790 +[[image:1652431650755-450.png]]
739 739  
740 -== File System ==
741 741  
793 +== 7.3 File System ==
794 +
795 +(((
742 742  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
797 +)))
743 743  
799 +(((
744 744  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
801 +)))
745 745  
803 +(((
746 746  You can use an external USB flash memory device to extend the size of flash memory for storage.
805 +)))
747 747  
748 -== Package maintenance system ==
749 749  
750 -DLOS8N uses the OpenWrt [[OPKG package maint>>url:https://wiki.openwrt.org/doc/techref/opkg]][[e>>url:https://wiki.openwrt.org/doc/techref/opkg]][[n>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ance>>url:https://wiki.openwrt.org/doc/techref/opkg]][[ system>>url:https://wiki.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
808 +== 7.4 Package maintenance system ==
751 751  
810 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
752 752  
753 -Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>url:https://wiki.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/wiki.openwrt.org/doc/techref/opkg>>url:https://wiki.openwrt.org/doc/techref/opkg]])
812 +(((
813 +Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
814 +)))
754 754  
816 +(((
817 +**In Linux Console run:**
818 +)))
755 755  
756 -In Linux Console run:
820 +(((
821 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
822 +)))
757 757  
758 -**root@dragino-169d30:~~# opkg update**  ~/~/ to get the latest packages list
824 +(((
825 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
826 +)))
759 759  
760 -**root@dragino-169d30:~~# opkg list**         ~/~/shows the available packages
828 +(((
829 +(% style="color:green" %)**root@dragino-169d30:~~# opkg install iperf ** (% style="color:black" %)~/~/ install iperf
830 +)))
761 761  
762 -**root@dragino-169d30:~~# opkg install iperf **~/~/ install iperf
763 -
764 764  The system will automatically install the required packages as shown below.
765 765  
766 766  
767 -//root@dragino-169d30:/etc/opkg# opkg install iperf//
835 +(((
836 +(% style="background-color:#dcdcdc" %)//root@dragino-169d30:/etc/opkg# opkg install iperf//
837 +)))
768 768  
769 -//Installing iperf (2.0.12-1) to root…//
839 +(((
840 +(% style="background-color:#dcdcdc" %)//Installing iperf (2.0.12-1) to root…//
841 +)))
770 770  
771 -//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
843 +(((
844 +(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/iperf_2.0.12-1_mips_24kc.ipk]]
845 +)))
772 772  
773 -//Installing uclibcxx (0.2.4-3) to root…//
847 +(((
848 +(% style="background-color:#dcdcdc" %)//Installing uclibcxx (0.2.4-3) to root…//
849 +)))
774 774  
775 -//Downloading //[[//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
851 +(((
852 +(% style="background-color:#dcdcdc" %)//Downloading //[[(% style="background-color: rgb(220, 220, 220); background-color: rgb(220, 220, 220)" %)//http:~~/~~/downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk//>>url:http://downloads.openwrt.org/snapshots/packages/mips_24kc/base/uclibcxx_0.2.4-3_mips_24kc.ipk]]
853 +)))
776 776  
777 -//Configuring uclibcxx.//
855 +(((
856 +(% style="background-color:#dcdcdc" %)//Configuring uclibcxx.//
857 +)))
778 778  
779 -//Configuring iperf.//
859 +(((
860 +(% style="background-color:#dcdcdc" %)//Configuring iperf.//
861 +)))
780 780  
863 += 8. Upgrade Linux Firmware =
781 781  
782 -1. Upgrade Linux Firmware
783 783  
784 -1. FAQ
785 -11. How can I configure for a customized frequency band?
866 += 9. FAQ =
786 786  
787 -See below link for how to customize frequency band:
868 +== 9.1 How can I configure for a customized frequency band? ==
788 788  
789 -[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
870 +(((
871 +See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
872 +)))
790 790  
874 +(((
875 +
876 +)))
791 791  
792 -1.
793 -11. Can I connect DLOS8N to LORIOT?
878 +== 9.2 Can I connect DLOS8N to LORIOT? ==
794 794  
795 -Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
880 +Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
796 796  
797 797  
798 -1.
799 -11. Can I make my own firmware for the gateway, where can I find the source code?
883 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
800 800  
885 +(((
801 801  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
887 +)))
802 802  
889 +(((
803 803  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
891 +)))
804 804  
805 805  
806 -1.
807 -11. Can I use 868Mhz version for 915Mhz bands?
894 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
808 808  
809 809  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
810 810  
811 811  
899 += 10. Trouble Shooting =
812 812  
901 +== 10.1 I get kernel error when install new package, how to fix? ==
813 813  
814 -1. Trouble Shooting
815 -11. I get kernel error when install new package, how to fix?
816 -
817 817  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
818 818  
905 +(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
819 819  
820 -root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
907 +(% style="background-color:yellow" %)Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
821 821  
822 -Installing kmod-dragino2-si3217x (3.10.49+0.2-1) to root…
909 +(% style="background-color:yellow" %)Collected errors:
823 823  
824 -Collected errors:
911 +(% style="background-color:yellow" %)* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
825 825  
826 -~* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-dragino2-si3217x:
913 +(% style="background-color:yellow" %)*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
827 827  
828 -*      kernel (= 3.10.49-1-4917516478a753314254643facdf360a) *
915 + (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
829 829  
830 - ~* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
831 -
832 -
917 +(((
833 833  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
919 +)))
834 834  
835 -Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
921 +(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
836 836  
837 837  
838 -1.
839 -11. How to recover the DLOS8N if the firmware crashes
924 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
840 840  
841 -Please follow this instruction to recover your gateway:
926 +(((
927 +Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
928 +)))
842 842  
843 -[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
930 +(((
931 +
932 +)))
844 844  
934 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
845 845  
936 +[[image:1652435238615-272.png||height="247" width="727"]]
846 846  
847 -
848 -
849 -1.
850 -11. I configured DLOS8N for WiFi access and lost its IP. What to do now?
851 -
852 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image067.png]]
853 -
938 +(((
854 854  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
940 +)))
855 855  
856 -(Note: fallback IP can be disabled in the WAN and DHCP page)
942 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
857 857  
858 858  
859 859  Steps to connect via fall back IP:
860 860  
861 -1. Connect PC’s Ethernet port to DLOS8N’s WAN port
862 -1. Configure PC’s Ethernet port has
863 -IP: 172.31.255.253 and
864 -Netmask: 255.255.255.252
947 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
865 865  
949 +2. Configure PC’s Ethernet port has
950 + IP: 172.31.255.253 and
951 + Netmask: 255.255.255.252
952 +
866 866  As below photo:
867 867  
868 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image068.jpg]]
955 +[[image:1652435256286-879.png]]
869 869  
870 -1. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
957 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
871 871  
872 872  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
873 873  
874 874  
962 += 11. Order Info =
875 875  
876 -1. Order Info
964 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
877 877  
878 -**//PART: DLOS8N-XXX-YYY//:**
966 +(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
879 879  
880 -**//XXX: Frequency Band//**
968 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
969 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
881 881  
882 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
883 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
971 +(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
884 884  
885 -**//YYY: 4G Cellular Option//**
973 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
974 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
975 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
976 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
886 886  
887 -* **E**: EMEA, Korea, Thailand, India.
888 -* **A**: North America/ Rogers/AT&T/T-Mobile.
889 -* **AU**: Latin America, New Zeland, Taiwan
890 -* **J**: Japan, DOCOMO/SoftBank/ KDDI
891 -
892 892  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
893 893  
894 894  
981 += 12. Packing Info =
895 895  
896 -
897 -1. Packing Info
898 -
983 +(((
899 899  **Package Includes**:
985 +)))
900 900  
901 901  * DLOS8N LoRaWAN Gateway x 1
902 902  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
903 903  * Packaging with environmental protection paper box
904 904  
991 +(((
905 905  **Dimension and weight**:
993 +)))
906 906  
907 907  * Device Size: 12 x 12 x 3 cm
908 908  * Weight: 187g
... ... @@ -909,11 +909,9 @@
909 909  * Package Size: 14.5 x 13.5 x 6 cm
910 910  * Weight: 300g
911 911  
912 -1. Support
1000 += 13. Support =
913 913  
914 -* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1002 +* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
915 915  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
916 916  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
917 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:
918 -
919 -[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1005 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652431609193-637.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1652431650755-450.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
1652435238615-272.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +68.7 KB
Content
1652435256286-879.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +111.5 KB
Content
1652436675869-206.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
1652436705761-420.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.8 KB
Content
1652436787176-950.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.7 KB
Content
1656917428377-954.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.7 KB
Content
image-20220513184125-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +139.3 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0