Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 199.2 >
edited by Xiaoye
on 2024/05/17 09:22
To version < 160.2 >
edited by Xiaoling
on 2022/08/23 10:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N -- LoRaWAN Gateway User Manual
1 +LPS8N - LoRaWAN Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Xiaoling
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents:**
7 +**Table of Contents：**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -15,19 +15,21 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -== (% data-sider-select-id="a36bf9cd-fdd9-49e1-813f-6d602534bdf0" %)1.1  What is the LPS8N(%%) ==
19 19  
19 +== 1.1  What is the LPS8N ==
20 20  
21 +
22 +
21 21  (((
22 -The LPS8N is an (% style="color:blue" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
24 +The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
24 24  
25 25  (((
26 -The LPS8N uses (% style="color:blue" %)**Semtech packet forwarder**(%%) & (% style="color:blue" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
28 +The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
27 27  )))
28 28  
29 29  (((
30 -LPS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands** (%%)to use in their own LoRa network.
32 +LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
31 31  )))
32 32  
33 33  (((
... ... @@ -34,10 +34,14 @@
34 34  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
35 35  )))
36 36  
39 +(((
40 +
41 +)))
37 37  
38 -[[image:image-20220826090251-1.png]]
43 +[[image:1656918270059-192.png]]
39 39  
40 40  
46 +
41 41  == 1.2  Specifications ==
42 42  
43 43  
... ... @@ -79,7 +79,7 @@
79 79  * Up to -140 dBm sensitivity
80 80  * 70 dB CW interferer rejection at 1 MHz offset
81 81  * Able to operate with negative SNR, CCR up to 9dB
82 -* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
88 +* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
83 83  * Dual digital TX & RX radio front-end interfaces
84 84  * 10 programmable parallel demodulation paths
85 85  * Dynamic data-rate (DDR) adaptation
... ... @@ -94,6 +94,9 @@
94 94  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
95 95  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
96 96  
103 +
104 +
105 +
97 97  == 1.3  Features ==
98 98  
99 99  
... ... @@ -111,12 +111,16 @@
111 111  * Support LoRaWAN basic station.
112 112  * Optional 3G/4G cellular connection
113 113  
123 +
124 +
125 +
114 114  == 1.4  Hardware System Structure ==
115 115  
116 116  
117 -[[image:image-20220830153228-1.png]]
129 +[[image:1657079015096-949.png]]
118 118  
119 119  
132 +
120 120  == 1.5  LPS8N Applications ==
121 121  
122 122  
... ... @@ -123,6 +123,7 @@
123 123  [[image:1657079055940-721.png]]
124 124  
125 125  
139 +
126 126  == 1.6  LED Indicators ==
127 127  
128 128  
... ... @@ -137,22 +137,9 @@
137 137  
138 138  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
139 139  
140 -== 1.7 Button Instruction ==
141 141  
142 142  
143 -LPS8N has a black toggle button, which is:
144 144  
145 -
146 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
147 -
148 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
149 -
150 -
151 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
152 -
153 - **LED status: ** When the user releases the button, the LED will TURN OFF.
154 -
155 -
156 156  = 2.  Access and Configure LPS8N =
157 157  
158 158  
... ... @@ -161,8 +161,10 @@
161 161  )))
162 162  
163 163  
165 +
164 164  == 2.1  Find IP address of LPS8N ==
165 165  
168 +
166 166  === 2.1.1  Connect via WiFi ===
167 167  
168 168  
... ... @@ -176,8 +176,9 @@
176 176  
177 177  
178 178  (((
179 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8N has the default IP (% style="color:green" %)10.130.1.1
182 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
180 180  
184 +
181 181  
182 182  )))
183 183  
... ... @@ -190,6 +190,7 @@
190 190  (((
191 191  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
192 192  
197 +
193 193  
194 194  )))
195 195  
... ... @@ -202,12 +202,14 @@
202 202  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
203 203  
204 204  
210 +
205 205  === 2.1.4  Connect via Ethernet with fall back ip ===
206 206  
207 207  
208 -The WAN port also has a [[fall back ip address>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
214 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
209 209  
210 210  
217 +
211 211  == 2.2  Access Configure Web UI ==
212 212  
213 213  
... ... @@ -226,15 +226,17 @@
226 226  
227 227  The account details for Web Login are:
228 228  
229 -(% style="color:blue" %)**User Name: root**
236 +(% style="color:#4f81bd" %)**User Name: root**
230 230  
231 -(% style="color:blue" %)**Password:   dragino**
238 +(% style="color:#4f81bd" %)**Password:   dragino**
232 232  
233 233  [[image:1652414287022-223.png]]
234 234  
235 235  
243 +
236 236  = 3.  Typical Network Setup =
237 237  
246 +
238 238  == 3.1  Overview ==
239 239  
240 240  
... ... @@ -244,6 +244,9 @@
244 244  * **WiFi Client Mode**
245 245  * **WiFi AP Mode**
246 246  
256 +
257 +
258 +
247 247  == 3.2  Use WAN port to access Internet ==
248 248  
249 249  
... ... @@ -253,6 +253,7 @@
253 253  [[image:1657088560833-398.png]]
254 254  
255 255  
268 +
256 256  == 3.3  Access the Internet as a WiFi Client ==
257 257  
258 258  
... ... @@ -269,6 +269,7 @@
269 269  (((
270 270  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
271 271  
285 +
272 272  
273 273  )))
274 274  
... ... @@ -312,6 +312,7 @@
312 312  )))
313 313  
314 314  
329 +
315 315  == 3.5  Check Internet connection ==
316 316  
317 317  
... ... @@ -324,6 +324,7 @@
324 324  [[image:1657091099235-452.png]]
325 325  
326 326  
342 +
327 327  = 4.  Example: Configure as a LoRaWAN gateway =
328 328  
329 329  
... ... @@ -331,7 +331,7 @@
331 331  
332 332  
333 333  (((
334 -[[image:image-20220826090251-1.png]]
350 +[[image:1657091257648-882.png]]
335 335  )))
336 336  
337 337  (((
... ... @@ -339,6 +339,7 @@
339 339  )))
340 340  
341 341  
358 +
342 342  == 4.1  Create a gateway in TTN V3 Server ==
343 343  
344 344  
... ... @@ -388,6 +388,9 @@
388 388  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
389 389  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
390 390  
408 +
409 +
410 +
391 391  (% style="color:blue" %)**Step 4: Create a Gateway**
392 392  
393 393  
... ... @@ -416,6 +416,7 @@
416 416  [[image:1657094130908-567.png]](% style="display:none" %)
417 417  
418 418  
439 +
419 419  == 4.2  Configure LPS8N to connect to TTN v3 ==
420 420  
421 421  
... ... @@ -451,6 +451,7 @@
451 451  [[image:1657094221515-510.png]]
452 452  
453 453  
475 +
454 454  == 4.3  Configure frequency ==
455 455  
456 456  
... ... @@ -466,6 +466,7 @@
466 466   [[image:1657094333704-207.png]]
467 467  
468 468  
491 +
469 469  == 4.4  Add a LoRaWAN End Device ==
470 470  
471 471  
... ... @@ -571,8 +571,10 @@
571 571  [[image:1657094791060-639.png]]
572 572  
573 573  
597 +
574 574  = 5.  Web Configure Pages =
575 575  
600 +
576 576  == 5.1  Home ==
577 577  
578 578  
... ... @@ -582,8 +582,10 @@
582 582  [[image:1657094893942-726.png]]
583 583  
584 584  
610 +
585 585  == 5.2  LoRa Settings ==
586 586  
613 +
587 587  === 5.2.1  LoRa ~-~-> LoRa ===
588 588  
589 589  
... ... @@ -613,6 +613,7 @@
613 613  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
614 614  
615 615  
643 +
616 616  === 5.2.2  LoRa ~-~-> ABP Decryption ===
617 617  
618 618  
... ... @@ -630,8 +630,10 @@
630 630  [[image:1657095412271-942.png]]
631 631  
632 632  
633 -== (% data-sider-select-id="9385f434-0cee-4e27-b68d-01cc94864f95" %)5.3  LoRaWAN Settings(%%) ==
634 634  
662 +== 5.3  LoRaWAN Settings ==
663 +
664 +
635 635  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
636 636  
637 637  
... ... @@ -638,7 +638,7 @@
638 638  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
639 639  
640 640  
641 -[[image:image-20240419150452-9.png||height="761" width="1098"]]
671 +[[image:1652423628833-467.png||height="357" width="755"]]
642 642  
643 643  
644 644  (% style="color:red" %)**Note:**
... ... @@ -650,31 +650,17 @@
650 650  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
651 651  
652 652  
653 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
654 654  
684 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
655 655  
656 -[[image:image-20230406172421-1.png||height="563" width="1089"]]
657 657  
687 +[[image:1652428499323-384.png||height="275" width="723"]]
658 658  
689 +
659 659  (((
660 -Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
691 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
661 661  
662 662  
663 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
664 -
665 -Instruction:
666 -
667 - [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
668 -
669 - [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
670 -
671 - [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
672 -
673 - ThingPark
674 -
675 - [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
676 -
677 -
678 678  
679 679  )))
680 680  
... ... @@ -694,9 +694,10 @@
694 694  [[image:1652428648903-878.png||height="266" width="731"]]
695 695  
696 696  
697 -== (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)5.4  MQTT Settings(%%) ==
698 698  
714 +== 5.4  MQTT Settings ==
699 699  
716 +
700 700  (((
701 701  If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
702 702  )))
... ... @@ -709,123 +709,99 @@
709 709  [[image:1652428705046-212.png||height="417" width="733"]]
710 710  
711 711  
712 -== (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)5.5  Network(%%) ==
713 713  
714 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.1  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> Network Status(%%) ===
730 +== 5.5  System ==
715 715  
716 716  
717 -[[image:image-20240419143226-2.png||height="742" width="950"]]
733 +=== 5.5.1  System ~-~-> System Overview ===
718 718  
719 719  
720 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.2  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> Network(%%) ===
736 +Shows the system info:
721 721  
738 +[[image:1657155158184-134.png]]
722 722  
740 +
741 +
742 +=== 5.5.2  System ~-~-> General ( login settings) ===
743 +
744 +
745 +[[image:1657155183982-792.png]]
746 +
747 +
723 723  (((
724 -(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
749 +(% style="color:#037691" %)**__System Password:__**
725 725  )))
726 726  
727 727  (((
728 -(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
753 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
729 729  )))
730 730  
731 731  (((
732 -(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
757 +This page can be used to set the password for them.
733 733  )))
734 734  
735 -[[image:image-20240419143347-3.png]]
760 +(((
761 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
762 +)))
736 736  
764 +(((
765 +(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
737 737  
738 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.3  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> WiFi(%%) ===
739 739  
768 +
769 +)))
740 740  
741 -(% data-sider-select-id="e57f4efb-f39f-4e11-bde3-f13f9b08254d" %)
742 -LPS8N WiFi Settings.
771 +=== 5.5.3  System ~-~-> Network ===
743 743  
773 +[[image:1657155288223-566.png]]
744 744  
745 -[[image:image-20240419143504-4.png||height="500" width="946"]]
746 -
747 -
748 -=== (% data-sider-select-id="be4c9623-8f61-4499-8859-fd388d34b2ab" %)5.5.4  Network ~-~-> Cellular(%%) ===
749 -
750 -
751 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
752 -
753 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
754 -
755 -(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
756 -
757 -
758 -== (% data-sider-select-id="9da31818-a029-4f0a-b9ff-645e219e4f4e" %)5.6  System(%%) ==
759 -
760 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.6.1  System ~-~-> System Overview(%%) ===
761 -
762 -
763 -Shows the system info:
764 -
765 -
766 -[[image:image-20220826091810-6.png]]
767 -
768 -
769 -=== (% data-sider-select-id="63bebde2-7978-4bee-90b2-58884b714aea" %)5.6.2  System ~-~-> General ( login settings)(%%) ===
770 -
771 -
772 -[[image:image-20240419144019-5.png]]
773 -
774 774  (((
775 -
776 -
777 -(% data-sider-select-id="00e0325f-1698-4166-b578-eba5340e7e8e" style="color:#037691" %)**__System Password:__**
776 +(% style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
778 778  )))
779 779  
780 780  (((
781 -There are two login for LPS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
780 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
782 782  )))
783 783  
784 784  (((
785 -This page can be used to set the password for them.
786 -)))
784 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
787 787  
788 -(((
789 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
786 +
787 +
790 790  )))
791 791  
792 -(((
793 -(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
794 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
790 +=== 5.5.4  System ~-~-> WiFi ===
795 795  
796 -(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
797 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
798 798  
799 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
793 +LPS8N WiFi Settings.
800 800  
801 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
795 +[[image:1657155457089-430.png]]
802 802  
803 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
804 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
805 805  
806 806  
807 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.3  System ~-~-> (%%)Backup/Restore Config ===
799 +=== 5.5.5  System ~-~-> Cellular ===
808 808  
809 809  
810 -[[image:image-20240419145717-7.png||height="240" width="890"]]
802 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
811 811  
812 812  
813 -(% data-sider-select-id="f13ff9e2-da2d-4df6-a9e9-427b7c0e69e5" %)
814 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.4  System ~-~-> (%%)Remote.it ===
805 +[[image:1657155507672-204.png]]
815 815  
816 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
817 817  
818 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
808 +(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
819 819  
820 -[[image:image-20240419150201-8.png||height="535" width="882"]]
821 821  
822 822  
823 -
824 -)))
812 +=== 5.5.6  System ~-~-> Network Status ===
825 825  
826 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.5  System ~-~-> Remote Mgnt & Auto Provision(%%) ===
827 827  
815 +[[image:1657155554265-721.png]]
828 828  
817 +
818 +
819 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
820 +
821 +
829 829  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
830 830  
831 831  
... ... @@ -839,7 +839,7 @@
839 839  
840 840  (% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
841 841  
842 -[[image:image-20220826091725-5.png||height="479" width="1004"]]
835 +[[image:image-20220707092040-3.png||height="449" width="956"]]
843 843  
844 844  
845 845  (((
... ... @@ -850,16 +850,15 @@
850 850  
851 851  (((
852 852  R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]
853 -
854 -
855 855  )))
856 856  
857 857  [[image:1652429624400-864.png||height="432" width="716"]]
858 858  
859 859  
860 -=== (% data-sider-select-id="48301489-7b19-464f-b442-96a6168a5e70" %)5.6.6  System ~-~-> Firmware Upgrade(%%) ===
861 861  
852 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
862 862  
854 +
863 863  We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
864 864  
865 865  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -877,13 +877,10 @@
877 877  
878 878  (((
879 879  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
880 -
881 -
882 882  )))
883 883  
884 884  [[image:1657156052651-770.png]]
885 885  
886 -
887 887  (((
888 888  Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update**(%%) to upgrade.
889 889  )))
... ... @@ -897,8 +897,6 @@
897 897  
898 898  (((
899 899  The system will automatically boot into the new firmware after upgrade.
900 -
901 -
902 902  )))
903 903  
904 904  [[image:1657156094153-520.png]]
... ... @@ -914,81 +914,51 @@
914 914  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
915 915  
916 916  
917 -=== (% data-sider-select-id="373b3cff-3336-4ea9-b2e3-80b269a25dbb" %)5.6.7  System ~-~-> Reboot/Reset(%%) ===
918 918  
905 +=== 5.5.9  System ~-~-> Reboot/Reset ===
919 919  
907 +
920 920  [[image:1652430197132-330.png||height="256" width="724"]]
921 921  
922 922  (((
923 923  
912 +
913 +
924 924  )))
925 925  
926 -=== (% data-sider-select-id="cc442f8d-4584-40ca-9073-38550c568e23" %)5.6.8  System ~-~-> Package Maintain(%%) ===
916 +=== 5.5.10  System ~-~-> Package Maintain ===
927 927  
928 928  
929 929  [[image:1657156199070-491.png]]
930 930  
931 -
932 932  Place to show what package has installed and possible to upgrade packages.
933 933  
934 934  
935 -== (% data-sider-select-id="393c2ac7-980d-4a0c-b0da-cab40221782d" %)5.7  LogRead(%%) ==
936 936  
937 -=== (% data-sider-select-id="a1857d6d-7292-49a4-9c2b-821fdcd8435a" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
925 +== 5.6  LogRead ==
938 938  
939 939  
940 -Show the frequency for LoRa Radio and traffics.
928 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
941 941  
942 942  
931 +Show the frequency for LoRa Radio and traffics.
932 +
943 943  [[image:1657156300781-933.png]]
944 944  
945 945  
946 -=== (% data-sider-select-id="6e7c0405-1a69-41f7-a2d7-7c06ef64ecfe" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
947 947  
948 -Show the gateway traffic:
937 +=== 5.6.2  LogRead ~-~-> System Log ===
949 949  
950 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112159-1.png?width=872&height=610&rev=1.1||alt="image-20240416112159-1.png"]]
951 951  
952 -
953 -=== (% data-sider-select-id="ce561240-23b4-4b3e-acc8-4a82ddba40f1" %)5.7.3 LogRead ~-~-> System Log(%%) ===
954 -
955 -
956 956  Show the system log
957 957  
958 -
959 959  [[image:1657156341198-226.png]]
960 960  
961 961  
962 -=== (% data-sider-select-id="c3f34a69-1c74-453c-a2b9-01ff619a05d2" %)5.7.4 LogRead ~-~-> Record Log(%%) ===
963 963  
964 -This interface can record gateway logs:
965 -
966 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112510-2.png?width=870&height=296&rev=1.1||alt="image-20240416112510-2.png"]]
967 -
968 968  = 6.  More features =
969 969  
970 970  
971 -== 6.1 NTP Service/Time Synchronization ==
972 -
973 -The gateway time sync service is provided by ntpd
974 -
975 -=== 1). Modify the NTP server address: ===
976 -
977 -(% class="box" %)
978 -(((
979 -uci set system.ntp.server='0.openwrt.pool.ntp.org'
980 -
981 -uci add_list system.ntp.server='1.openwrt.pool.ntp.org'
982 -
983 -uci add_list system.ntp.server='2.openwrt.pool.ntp.org'
984 -
985 -uci add_list system.ntp.server='3.openwrt.pool.ntp.org'
986 -
987 -uci commit system
988 -)))
989 -
990 -=== ===
991 -
992 992  == 6.1 Packet Filtering ==
993 993  
994 994  
... ... @@ -1001,6 +1001,7 @@
1001 1001  )))
1002 1002  
1003 1003  
961 +
1004 1004  == 6.2 Remote Access ==
1005 1005  
1006 1006  
... ... @@ -1013,6 +1013,7 @@
1013 1013  )))
1014 1014  
1015 1015  
974 +
1016 1016  == 6.3 How to decode ABP LoRaWAN node ==
1017 1017  
1018 1018  
... ... @@ -1025,6 +1025,7 @@
1025 1025  )))
1026 1026  
1027 1027  
987 +
1028 1028  == 6.4 How to set data to MQTT broker ==
1029 1029  
1030 1030  
... ... @@ -1034,78 +1034,20 @@
1034 1034  
1035 1035  (((
1036 1036  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1037 -
1038 -
1039 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1040 -
1041 -
1042 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
1043 -
1044 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1045 -
1046 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
1047 -
1048 -
1049 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
1050 -
1051 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
1052 -
1053 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
1054 -
1055 -
1056 1056  )))
1057 1057  
1058 -(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
1059 1059  
1060 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1061 1061  
1001 +== 6.5  More instructions ==
1062 1062  
1063 -== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1064 1064  
1065 -
1066 -USB card reader plugged into the USB port of the gateway
1067 -
1068 -
1069 -Access the gateway Linux Command Line
1070 -
1071 -
1072 -Check the USB device
1073 -
1074 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1075 -
1076 -
1077 -**Mount the USB device**
1078 -
1079 -(% class="box infomessage" %)
1080 -(((
1081 -**mount /dev/sda1 /mnt/**
1082 -)))
1083 -
1084 -(% class="wikigeneratedid" %)
1085 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1086 -
1087 -
1088 -(% class="wikigeneratedid" %)
1089 -**Set up the automatic mount on boot**
1090 -
1091 -(% class="box infomessage" %)
1092 -(((
1093 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1094 -)))
1095 -
1096 -(% class="wikigeneratedid" %)
1097 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1098 -
1099 -
1100 -== 6.7  More instructions ==
1101 -
1102 -
1103 1103  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1104 1104  
1105 1105  
1106 -== 6.8  Auto-Provision ==
1107 1107  
1008 +== 6.6  Auto-Provision ==
1108 1108  
1010 +
1109 1109  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1110 1110  
1111 1111  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -1112,9 +1112,8 @@
1112 1112  
1113 1113  [[image:image-20220707092040-2.png||height="452" width="1002"]]
1114 1114  
1115 -[[image:image-20220826091546-4.png]](% style="display:none" %)
1017 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
1116 1116  
1117 -
1118 1118  (((
1119 1119  Please see this document for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
1120 1120  )))
... ... @@ -1121,6 +1121,7 @@
1121 1121  
1122 1122  (% style="display:none" %) (%%)
1123 1123  
1025 +
1124 1124  = 7.  (% style="display:none" %) (%%)Linux System =
1125 1125  
1126 1126  
... ... @@ -1128,6 +1128,7 @@
1128 1128  
1129 1129  (% style="display:none" %) (%%)
1130 1130  
1033 +
1131 1131  == 7.1  SSH Access for Linux console ==
1132 1132  
1133 1133  
... ... @@ -1146,7 +1146,6 @@
1146 1146  
1147 1147  [[image:1657158198733-338.png]]
1148 1148  
1149 -
1150 1150  The “** (% style="background-color:yellow" %)logread -f(%%)**(% style="background-color:yellow" %)” (%%)command can be used to debug how system runs.
1151 1151  
1152 1152  
... ... @@ -1153,6 +1153,7 @@
1153 1153  [[image:1657158190234-805.png]]
1154 1154  
1155 1155  
1058 +
1156 1156  == 7.2  Edit and Transfer files ==
1157 1157  
1158 1158  
... ... @@ -1175,6 +1175,7 @@
1175 1175  [[image:1652431650755-450.png]]
1176 1176  
1177 1177  
1081 +
1178 1178  == 7.3  File System ==
1179 1179  
1180 1180  
... ... @@ -1191,6 +1191,7 @@
1191 1191  )))
1192 1192  
1193 1193  
1098 +
1194 1194  == 7.4  Package maintenance system ==
1195 1195  
1196 1196  
... ... @@ -1246,6 +1246,7 @@
1246 1246  (((
1247 1247  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1248 1248  
1154 +
1249 1249  
1250 1250  )))
1251 1251  
... ... @@ -1268,6 +1268,7 @@
1268 1268  )))
1269 1269  
1270 1270  
1177 +
1271 1271  == 8.1 Upgrade via Web UI ==
1272 1272  
1273 1273  
... ... @@ -1287,13 +1287,12 @@
1287 1287  
1288 1288  (((
1289 1289  The system will automatically boot into the new firmware after upgrade.
1290 -
1291 -
1292 1292  )))
1293 1293  
1294 1294  [[image:1657158986600-386.png]]
1295 1295  
1296 1296  
1202 +
1297 1297  == 8.2 Upgrade via Linux console ==
1298 1298  
1299 1299  
... ... @@ -1311,17 +1311,13 @@
1311 1311  )))
1312 1312  
1313 1313  
1314 -= 9.  OTA System Update =
1315 1315  
1221 += 9.  FAQ =
1316 1316  
1317 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1318 1318  
1224 +== 9.1  How can I configure for a customized frequency band? ==
1319 1319  
1320 -= 10.  FAQ =
1321 1321  
1322 -== 10.1  How can I configure for a customized frequency band? ==
1323 -
1324 -
1325 1325  (((
1326 1326  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1327 1327  )))
... ... @@ -1328,9 +1328,11 @@
1328 1328  
1329 1329  (((
1330 1330  
1233 +
1234 +
1331 1331  )))
1332 1332  
1333 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1237 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1334 1334  
1335 1335  
1336 1336  (((
... ... @@ -1343,28 +1343,23 @@
1343 1343  
1344 1344  (((
1345 1345  
1250 +
1251 +
1346 1346  )))
1347 1347  
1348 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1254 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1349 1349  
1350 1350  
1351 -It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1257 +It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1352 1352  
1353 1353  
1354 -== (% data-sider-select-id="59a03633-54e9-489e-a7d2-d0a332359cee" %)10.4  DIN Rail Mounting Reference.(%%) ==
1355 1355  
1261 += 10.  Trouble Shooting =
1356 1356  
1357 -[[image:image-20240318095136-1.jpeg||height="785" width="785"]]
1358 1358  
1359 -[[image:image-20240318095410-2.png||height="179" width="402"]]
1264 +== 10.1  I get kernel error when install new package, how to fix? ==
1360 1360  
1361 1361  
1362 -
1363 -= 11.  Trouble Shooting =
1364 -
1365 -== 11.1  I get kernel error when install new package, how to fix? ==
1366 -
1367 -
1368 1368  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1369 1369  
1370 1370  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1386,9 +1386,10 @@
1386 1386  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1387 1387  
1388 1388  
1389 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1390 1390  
1289 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1391 1391  
1291 +
1392 1392  (((
1393 1393  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1394 1394  )))
... ... @@ -1395,12 +1395,14 @@
1395 1395  
1396 1396  (((
1397 1397  
1298 +
1299 +
1398 1398  )))
1399 1399  
1400 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1302 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1401 1401  
1402 1402  
1403 -[[image:image-20231116112906-1.png]]
1305 +[[image:1657159323292-776.png]]
1404 1404  
1405 1405  
1406 1406  (((
... ... @@ -1412,26 +1412,25 @@
1412 1412  
1413 1413  **Steps to connect via fall back IP:**
1414 1414  
1415 -~1. Connect PC's Ethernet port to LPS8N's WAN port
1317 +~1. Connect PC's Ethernet port to LG01's WAN port
1416 1416  
1417 1417  2. Configure PC's Ethernet port has
1418 1418   IP: 172.31.255.253 and
1419 1419   Netmask: 255.255.255.252
1420 1420  
1421 -
1422 1422  As below photo:
1423 1423  
1424 1424  [[image:1652435256286-879.png]]
1425 1425  
1426 -
1427 1427  3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1428 1428  
1429 1429  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1430 1430  
1431 1431  
1432 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1433 1433  
1333 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1434 1434  
1335 +
1435 1435  (((
1436 1436  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1437 1437  )))
... ... @@ -1438,59 +1438,40 @@
1438 1438  
1439 1439  (((
1440 1440  In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1441 -
1442 -
1443 -== 11.5 When i power on LPS8N , i can only see PWR LED is on. other LEDs are not blinking. ==
1444 -
1445 -If there is no LED blink except the PWR led. There might be:
1446 -
1447 -1) Power adapter issue. In this case, please try another power adapter.
1448 -
1449 -2) Mother Board broken.
1450 1450  )))
1451 1451  
1452 1452  
1453 -(% data-sider-select-id="496725ea-6ec4-436c-82d7-547b7e14d448" %)
1454 -== (% data-sider-select-id="59a03633-54e9-489e-a7d2-d0a332359cee" %)11.6  (%%)Why does the gateway reboot every 15 minutes without Internet? ==
1455 1455  
1346 += 11.  Order Info =
1456 1456  
1457 -(% data-sider-select-id="4b74d469-5382-4aed-969a-48abd1fe271b" %)
1458 -Check whether Internet Detect is enabled on the System~-~->General interface.
1459 1459  
1460 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
1461 -Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1349 +**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1462 1462  
1463 -[[image:image-20240419145139-6.png||height="639" width="856"]]
1464 1464  
1352 +(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1465 1465  
1466 -= 12.  Order Info =
1467 -
1468 -
1469 -**PART: (% style="color:blue" %)LPS8N-XXX-YYY: (%%)**
1470 -
1471 -(% style="color:blue" %) **XXX:**(%%)** Frequency Band**
1472 -
1473 1473  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1474 1474  * (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1475 1475  
1476 -(% style="color:blue" %) **YYY:**(%%)** 4G Cellular Option**
1357 +(% style="color:blue" %) **//YYY~://**(%%)**// 4G Cellular Option//**
1477 1477  
1478 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1479 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1480 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1481 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1359 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1360 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1361 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1362 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1482 1482  
1483 1483  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1484 1484  
1485 1485  
1486 -= 13.  Packing Info =
1487 1487  
1368 += 12.  Packing Info =
1488 1488  
1370 +
1489 1489  (((
1490 1490  **Package Includes**:
1491 1491  )))
1492 1492  
1493 -* LPS8N LoRaWAN Gateway x 1
1375 +* DLOS8N LoRaWAN Gateway x 1
1494 1494  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1495 1495  * Packaging with environmental protection paper box
1496 1496  
... ... @@ -1503,12 +1503,9 @@
1503 1503  * Package Size: 14.5 x 13.5 x 6 cm
1504 1504  * Weight: 300g
1505 1505  
1506 -= 14.  Support =
1388 += 13.  Support =
1507 1507  
1508 -
1509 1509  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1510 1510  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1511 1511  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1512 1512  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1513 -
1514 -
image-20220826090251-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -146.0 KB
Content
image-20220826090430-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826090449-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826091546-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091725-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091810-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content
image-20230406172421-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.6 KB
Content
image-20231116112906-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.0 KB
Content
image-20240318095136-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -547.3 KB
Content
image-20240318095410-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -80.6 KB
Content
image-20240419143153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
image-20240419143226-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.2 KB
Content
image-20240419143347-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.3 KB
Content
image-20240419143504-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.3 KB
Content
image-20240419144019-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -67.8 KB
Content
image-20240419145139-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240419145717-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20240419150201-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20240419150452-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -81.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0