Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 198.1 >
edited by Kilight Cao
on 2024/04/19 15:04
To version < 172.1 >
edited by Kilight Cao
on 2023/03/31 14:52
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N -- LoRaWAN Gateway User Manual
1 +LPS8N - LoRaWAN Gateway User Manual
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents:**
7 +**Table of Contents：**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -15,19 +15,19 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -== (% data-sider-select-id="a36bf9cd-fdd9-49e1-813f-6d602534bdf0" %)1.1  What is the LPS8N(%%) ==
18 +== 1.1  What is the LPS8N ==
19 19  
20 20  
21 21  (((
22 -The LPS8N is an (% style="color:blue" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
24 24  
25 25  (((
26 -The LPS8N uses (% style="color:blue" %)**Semtech packet forwarder**(%%) & (% style="color:blue" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
26 +The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
27 27  )))
28 28  
29 29  (((
30 -LPS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands** (%%)to use in their own LoRa network.
30 +LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
31 31  )))
32 32  
33 33  (((
... ... @@ -34,6 +34,9 @@
34 34  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
35 35  )))
36 36  
37 +(((
38 +
39 +)))
37 37  
38 38  [[image:image-20220826090251-1.png]]
39 39  
... ... @@ -79,7 +79,7 @@
79 79  * Up to -140 dBm sensitivity
80 80  * 70 dB CW interferer rejection at 1 MHz offset
81 81  * Able to operate with negative SNR, CCR up to 9dB
82 -* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
85 +* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
83 83  * Dual digital TX & RX radio front-end interfaces
84 84  * 10 programmable parallel demodulation paths
85 85  * Dynamic data-rate (DDR) adaptation
... ... @@ -176,7 +176,7 @@
176 176  
177 177  
178 178  (((
179 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8N has the default IP (% style="color:green" %)10.130.1.1
182 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
180 180  
181 181  
182 182  )))
... ... @@ -205,7 +205,7 @@
205 205  === 2.1.4  Connect via Ethernet with fall back ip ===
206 206  
207 207  
208 -The WAN port also has a [[fall back ip address>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
211 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
209 209  
210 210  
211 211  == 2.2  Access Configure Web UI ==
... ... @@ -226,9 +226,9 @@
226 226  
227 227  The account details for Web Login are:
228 228  
229 -(% style="color:blue" %)**User Name: root**
232 +(% style="color:#4f81bd" %)**User Name: root**
230 230  
231 -(% style="color:blue" %)**Password:   dragino**
234 +(% style="color:#4f81bd" %)**Password:   dragino**
232 232  
233 233  [[image:1652414287022-223.png]]
234 234  
... ... @@ -650,31 +650,15 @@
650 650  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
651 651  
652 652  
653 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
656 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
654 654  
655 655  
656 -[[image:image-20230406172421-1.png]]
659 +[[image:1652428499323-384.png||height="275" width="723"]]
657 657  
658 658  
659 659  (((
660 -Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
663 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
661 661  
662 -
663 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
664 -
665 -Instruction:
666 -
667 - [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
668 -
669 - [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
670 -
671 - [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
672 -
673 - ThingPark
674 -
675 - [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
676 -
677 -
678 678  
679 679  )))
680 680  
... ... @@ -694,7 +694,7 @@
694 694  [[image:1652428648903-878.png||height="266" width="731"]]
695 695  
696 696  
697 -== (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)5.4  MQTT Settings(%%) ==
684 +== 5.4  MQTT Settings ==
698 698  
699 699  
700 700  (((
... ... @@ -709,123 +709,95 @@
709 709  [[image:1652428705046-212.png||height="417" width="733"]]
710 710  
711 711  
712 -== (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)5.5  Network(%%) ==
699 +== 5.5  System ==
713 713  
714 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.1  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> Network Status(%%) ===
701 +=== 5.5.1  System ~-~-> System Overview ===
715 715  
716 716  
717 -[[image:image-20240419143226-2.png||height="742" width="950"]]
704 +Shows the system info:
718 718  
719 719  
720 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.2  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> Network(%%) ===
707 +[[image:image-20220826091810-6.png]]
721 721  
722 722  
710 +=== 5.5.2  System ~-~-> General ( login settings) ===
711 +
712 +
713 +[[image:1657155183982-792.png]]
714 +
715 +
723 723  (((
724 -(% data-sider-select-id="040776ba-bc4f-4586-9d1c-eb5b5c7f1e7d" style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
717 +(% style="color:#037691" %)**__System Password:__**
725 725  )))
726 726  
727 727  (((
728 -(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
721 +There are two login for LPS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
729 729  )))
730 730  
731 731  (((
732 -(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
725 +This page can be used to set the password for them.
733 733  )))
734 734  
735 -[[image:image-20240419143347-3.png]]
728 +(((
729 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
730 +)))
736 736  
732 +(((
733 +(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
737 737  
738 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.5.3  (% data-sider-select-id="901b4be6-9ff2-4d69-bbb1-a2ce5a602f9b" %)Network(% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %) ~-~-> WiFi(%%) ===
735 +
736 +)))
739 739  
738 +=== 5.5.3  System ~-~-> Network ===
740 740  
741 -(% data-sider-select-id="e57f4efb-f39f-4e11-bde3-f13f9b08254d" %)
742 -LPS8N WiFi Settings.
743 743  
741 +[[image:1657155288223-566.png]]
744 744  
745 -[[image:image-20240419143504-4.png||height="500" width="946"]]
746 746  
747 -
748 -=== (% data-sider-select-id="be4c9623-8f61-4499-8859-fd388d34b2ab" %)5.5.4  Network ~-~-> Cellular(%%) ===
749 -
750 -
751 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
752 -
753 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
754 -
755 -(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
756 -
757 -
758 -== (% data-sider-select-id="9da31818-a029-4f0a-b9ff-645e219e4f4e" %)5.6  System(%%) ==
759 -
760 -=== (% data-sider-select-id="5eaf7530-1272-4643-b349-9de78d98959c" %)5.6.1  System ~-~-> System Overview(%%) ===
761 -
762 -
763 -Shows the system info:
764 -
765 -
766 -[[image:image-20220826091810-6.png]]
767 -
768 -
769 -=== (% data-sider-select-id="63bebde2-7978-4bee-90b2-58884b714aea" %)5.6.2  System ~-~-> General ( login settings)(%%) ===
770 -
771 -
772 -[[image:image-20240419144019-5.png]]
773 -
774 774  (((
775 -
776 -
777 -(% data-sider-select-id="00e0325f-1698-4166-b578-eba5340e7e8e" style="color:#037691" %)**__System Password:__**
745 +(% style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
778 778  )))
779 779  
780 780  (((
781 -There are two login for LPS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
749 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
782 782  )))
783 783  
784 784  (((
785 -This page can be used to set the password for them.
786 -)))
753 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
787 787  
788 -(((
789 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
755 +
790 790  )))
791 791  
792 -(((
793 -(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
794 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
758 +=== 5.5.4  System ~-~-> WiFi ===
795 795  
796 -(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
797 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
798 798  
799 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
761 +LPS8N WiFi Settings.
800 800  
801 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
802 802  
803 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
804 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
764 +[[image:1657155457089-430.png]]
805 805  
806 806  
807 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.3  System ~-~-> (%%)Backup/Restore Config ===
767 +=== 5.5.5  System ~-~-> Cellular ===
808 808  
809 809  
810 -[[image:image-20240419145717-7.png||height="240" width="890"]]
770 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
811 811  
812 812  
813 -(% data-sider-select-id="f13ff9e2-da2d-4df6-a9e9-427b7c0e69e5" %)
814 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.4  System ~-~-> (%%)Remote.it ===
773 +[[image:1657155507672-204.png]]
815 815  
816 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
817 817  
818 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
776 +(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
819 819  
820 -[[image:image-20240419150201-8.png||height="535" width="882"]]
821 821  
779 +=== 5.5.6  System ~-~-> Network Status ===
822 822  
823 -
824 -)))
825 825  
826 -=== (% data-sider-select-id="7b902d7f-391d-4277-92fc-77ddd2546b9a" %)5.6.5  System ~-~-> Remote Mgnt & Auto Provision(%%) ===
782 +[[image:1657155554265-721.png]]
827 827  
828 828  
785 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
786 +
787 +
829 829  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
830 830  
831 831  
... ... @@ -857,7 +857,7 @@
857 857  [[image:1652429624400-864.png||height="432" width="716"]]
858 858  
859 859  
860 -=== (% data-sider-select-id="48301489-7b19-464f-b442-96a6168a5e70" %)5.6.6  System ~-~-> Firmware Upgrade(%%) ===
819 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
861 861  
862 862  
863 863  We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -914,7 +914,7 @@
914 914  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
915 915  
916 916  
917 -=== (% data-sider-select-id="373b3cff-3336-4ea9-b2e3-80b269a25dbb" %)5.6.7  System ~-~-> Reboot/Reset(%%) ===
876 +=== 5.5.9  System ~-~-> Reboot/Reset ===
918 918  
919 919  
920 920  [[image:1652430197132-330.png||height="256" width="724"]]
... ... @@ -923,7 +923,7 @@
923 923  
924 924  )))
925 925  
926 -=== (% data-sider-select-id="cc442f8d-4584-40ca-9073-38550c568e23" %)5.6.8  System ~-~-> Package Maintain(%%) ===
885 +=== 5.5.10  System ~-~-> Package Maintain ===
927 927  
928 928  
929 929  [[image:1657156199070-491.png]]
... ... @@ -932,9 +932,9 @@
932 932  Place to show what package has installed and possible to upgrade packages.
933 933  
934 934  
935 -== (% data-sider-select-id="393c2ac7-980d-4a0c-b0da-cab40221782d" %)5.7  LogRead(%%) ==
894 +== 5.6  LogRead ==
936 936  
937 -=== (% data-sider-select-id="a1857d6d-7292-49a4-9c2b-821fdcd8435a" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
896 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
938 938  
939 939  
940 940  Show the frequency for LoRa Radio and traffics.
... ... @@ -943,16 +943,9 @@
943 943  [[image:1657156300781-933.png]]
944 944  
945 945  
946 -=== (% data-sider-select-id="6e7c0405-1a69-41f7-a2d7-7c06ef64ecfe" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
905 +=== 5.6.2  LogRead ~-~-> System Log ===
947 947  
948 -Show the gateway traffic:
949 949  
950 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112159-1.png?width=872&height=610&rev=1.1||alt="image-20240416112159-1.png"]]
951 -
952 -
953 -=== (% data-sider-select-id="ce561240-23b4-4b3e-acc8-4a82ddba40f1" %)5.7.3 LogRead ~-~-> System Log(%%) ===
954 -
955 -
956 956  Show the system log
957 957  
958 958  
... ... @@ -959,12 +959,6 @@
959 959  [[image:1657156341198-226.png]]
960 960  
961 961  
962 -=== (% data-sider-select-id="c3f34a69-1c74-453c-a2b9-01ff619a05d2" %)5.7.4 LogRead ~-~-> Record Log(%%) ===
963 -
964 -This interface can record gateway logs:
965 -
966 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112510-2.png?width=870&height=296&rev=1.1||alt="image-20240416112510-2.png"]]
967 -
968 968  = 6.  More features =
969 969  
970 970  == 6.1 Packet Filtering ==
... ... @@ -1021,7 +1021,7 @@
1021 1021  
1022 1022  [[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
1023 1023  
1024 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
970 +Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
1025 1025  
1026 1026  
1027 1027  If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
... ... @@ -1033,55 +1033,16 @@
1033 1033  
1034 1034  )))
1035 1035  
1036 -(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
982 +(% style="color:red" %)**Note**(%%): After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1037 1037  
1038 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1039 1039  
985 +== 6.6  More instructions ==
1040 1040  
1041 -== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1042 1042  
1043 -
1044 -USB card reader plugged into the USB port of the gateway
1045 -
1046 -
1047 -Access the gateway Linux Command Line
1048 -
1049 -
1050 -Check the USB device
1051 -
1052 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1053 -
1054 -
1055 -**Mount the USB device**
1056 -
1057 -(% class="box infomessage" %)
1058 -(((
1059 -**mount /dev/sda1 /mnt/**
1060 -)))
1061 -
1062 -(% class="wikigeneratedid" %)
1063 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1064 -
1065 -
1066 -(% class="wikigeneratedid" %)
1067 -**Set up the automatic mount on boot**
1068 -
1069 -(% class="box infomessage" %)
1070 -(((
1071 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1072 -)))
1073 -
1074 -(% class="wikigeneratedid" %)
1075 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1076 -
1077 -
1078 -== 6.7  More instructions ==
1079 -
1080 -
1081 1081  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1082 1082  
1083 1083  
1084 -== 6.8  Auto-Provision ==
991 +== 6.7  Auto-Provision ==
1085 1085  
1086 1086  
1087 1087  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
... ... @@ -1326,18 +1326,9 @@
1326 1326  == 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1327 1327  
1328 1328  
1329 -It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1236 +It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1330 1330  
1331 1331  
1332 -== (% data-sider-select-id="59a03633-54e9-489e-a7d2-d0a332359cee" %)10.4  DIN Rail Mounting Reference.(%%) ==
1333 -
1334 -
1335 -[[image:image-20240318095136-1.jpeg||height="785" width="785"]]
1336 -
1337 -[[image:image-20240318095410-2.png||height="179" width="402"]]
1338 -
1339 -
1340 -
1341 1341  = 11.  Trouble Shooting =
1342 1342  
1343 1343  == 11.1  I get kernel error when install new package, how to fix? ==
... ... @@ -1378,7 +1378,7 @@
1378 1378  == 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1379 1379  
1380 1380  
1381 -[[image:image-20231116112906-1.png]]
1279 +[[image:1657159323292-776.png]]
1382 1382  
1383 1383  
1384 1384  (((
... ... @@ -1390,7 +1390,7 @@
1390 1390  
1391 1391  **Steps to connect via fall back IP:**
1392 1392  
1393 -~1. Connect PC's Ethernet port to LPS8N's WAN port
1291 +~1. Connect PC's Ethernet port to LG01's WAN port
1394 1394  
1395 1395  2. Configure PC's Ethernet port has
1396 1396   IP: 172.31.255.253 and
... ... @@ -1416,47 +1416,25 @@
1416 1416  
1417 1417  (((
1418 1418  In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1419 -
1420 -
1421 -== 11.5 When i power on LPS8N , i can only see PWR LED is on. other LEDs are not blinking. ==
1422 -
1423 -If there is no LED blink except the PWR led. There might be:
1424 -
1425 -1) Power adapter issue. In this case, please try another power adapter.
1426 -
1427 -2) Mother Board broken.
1428 1428  )))
1429 1429  
1430 1430  
1431 -(% data-sider-select-id="496725ea-6ec4-436c-82d7-547b7e14d448" %)
1432 -== (% data-sider-select-id="59a03633-54e9-489e-a7d2-d0a332359cee" %)11.6  (%%)Why does the gateway reboot every 15 minutes without Internet? ==
1433 -
1434 -
1435 -(% data-sider-select-id="4b74d469-5382-4aed-969a-48abd1fe271b" %)
1436 -Check whether Internet Detect is enabled on the System~-~->General interface.
1437 -
1438 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
1439 -Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1440 -
1441 -[[image:image-20240419145139-6.png||height="639" width="856"]]
1442 -
1443 -
1444 1444  = 12.  Order Info =
1445 1445  
1446 1446  
1447 -**PART: (% style="color:blue" %)LPS8N-XXX-YYY: (%%)**
1323 +**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1448 1448  
1449 -(% style="color:blue" %) **XXX:**(%%)** Frequency Band**
1325 +(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1450 1450  
1451 1451  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1452 1452  * (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1453 1453  
1454 -(% style="color:blue" %) **YYY:**(%%)** 4G Cellular Option**
1330 +(% style="color:blue" %) **//YYY~://**(%%)**// 4G Cellular Option//**
1455 1455  
1456 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1457 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1458 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1459 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1332 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1333 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1334 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1335 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1460 1460  
1461 1461  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1462 1462  
... ... @@ -1489,4 +1489,9 @@
1489 1489  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1490 1490  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1491 1491  
1368 +
1369 +
1370 +
1371 +
1372 +
1492 1492  
image-20230406172421-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.6 KB
Content
image-20231116112906-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.0 KB
Content
image-20240318095136-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -547.3 KB
Content
image-20240318095410-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -80.6 KB
Content
image-20240419143153-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
image-20240419143226-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -42.2 KB
Content
image-20240419143347-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.3 KB
Content
image-20240419143504-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -53.3 KB
Content
image-20240419144019-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -67.8 KB
Content
image-20240419145139-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -119.8 KB
Content
image-20240419145717-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -35.4 KB
Content
image-20240419150201-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.9 KB
Content
image-20240419150452-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -81.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0