Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 179.1 >
edited by Kilight Cao
on 2023/11/16 11:29
To version < 160.3 >
edited by Xiaoling
on 2022/08/23 11:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -15,19 +15,21 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
22 +
21 21  (((
22 -The LPS8N is an (% style="color:blue" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
24 +The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
24 24  
25 25  (((
26 -The LPS8N uses (% style="color:blue" %)**Semtech packet forwarder**(%%) & (% style="color:blue" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
28 +The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
27 27  )))
28 28  
29 29  (((
30 -LPS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands** (%%)to use in their own LoRa network.
32 +LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
31 31  )))
32 32  
33 33  (((
... ... @@ -34,10 +34,14 @@
34 34  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
35 35  )))
36 36  
39 +(((
40 +
41 +)))
37 37  
38 -[[image:image-20220826090251-1.png]]
43 +[[image:1656918270059-192.png]]
39 39  
40 40  
46 +
41 41  == 1.2  Specifications ==
42 42  
43 43  
... ... @@ -95,6 +95,7 @@
95 95  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
96 96  
97 97  
104 +
98 98  == 1.3  Features ==
99 99  
100 100  
... ... @@ -113,12 +113,14 @@
113 113  * Optional 3G/4G cellular connection
114 114  
115 115  
123 +
116 116  == 1.4  Hardware System Structure ==
117 117  
118 118  
119 -[[image:image-20220830153228-1.png]]
127 +[[image:1657079015096-949.png]]
120 120  
121 121  
130 +
122 122  == 1.5  LPS8N Applications ==
123 123  
124 124  
... ... @@ -125,6 +125,7 @@
125 125  [[image:1657079055940-721.png]]
126 126  
127 127  
137 +
128 128  == 1.6  LED Indicators ==
129 129  
130 130  
... ... @@ -140,22 +140,7 @@
140 140  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
141 141  
142 142  
143 -== 1.7 Button Instruction ==
144 144  
145 -
146 -LPS8N has a black toggle button, which is:
147 -
148 -
149 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
150 -
151 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
152 -
153 -
154 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
155 -
156 - **LED status: ** When the user releases the button, the LED will TURN OFF.
157 -
158 -
159 159  = 2.  Access and Configure LPS8N =
160 160  
161 161  
... ... @@ -164,8 +164,10 @@
164 164  )))
165 165  
166 166  
162 +
167 167  == 2.1  Find IP address of LPS8N ==
168 168  
165 +
169 169  === 2.1.1  Connect via WiFi ===
170 170  
171 171  
... ... @@ -181,6 +181,7 @@
181 181  (((
182 182  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
183 183  
181 +
184 184  
185 185  )))
186 186  
... ... @@ -193,6 +193,7 @@
193 193  (((
194 194  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
195 195  
194 +
196 196  
197 197  )))
198 198  
... ... @@ -205,12 +205,14 @@
205 205  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
206 206  
207 207  
207 +
208 208  === 2.1.4  Connect via Ethernet with fall back ip ===
209 209  
210 210  
211 -The WAN port also has a [[fall back ip address>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
211 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
212 212  
213 213  
214 +
214 214  == 2.2  Access Configure Web UI ==
215 215  
216 216  
... ... @@ -229,15 +229,17 @@
229 229  
230 230  The account details for Web Login are:
231 231  
232 -(% style="color:blue" %)**User Name: root**
233 +(% style="color:#4f81bd" %)**User Name: root**
233 233  
234 -(% style="color:blue" %)**Password:   dragino**
235 +(% style="color:#4f81bd" %)**Password:   dragino**
235 235  
236 236  [[image:1652414287022-223.png]]
237 237  
238 238  
240 +
239 239  = 3.  Typical Network Setup =
240 240  
243 +
241 241  == 3.1  Overview ==
242 242  
243 243  
... ... @@ -248,6 +248,7 @@
248 248  * **WiFi AP Mode**
249 249  
250 250  
254 +
251 251  == 3.2  Use WAN port to access Internet ==
252 252  
253 253  
... ... @@ -257,6 +257,7 @@
257 257  [[image:1657088560833-398.png]]
258 258  
259 259  
264 +
260 260  == 3.3  Access the Internet as a WiFi Client ==
261 261  
262 262  
... ... @@ -273,6 +273,7 @@
273 273  (((
274 274  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
275 275  
281 +
276 276  
277 277  )))
278 278  
... ... @@ -316,6 +316,7 @@
316 316  )))
317 317  
318 318  
325 +
319 319  == 3.5  Check Internet connection ==
320 320  
321 321  
... ... @@ -328,6 +328,7 @@
328 328  [[image:1657091099235-452.png]]
329 329  
330 330  
338 +
331 331  = 4.  Example: Configure as a LoRaWAN gateway =
332 332  
333 333  
... ... @@ -335,7 +335,7 @@
335 335  
336 336  
337 337  (((
338 -[[image:image-20220826090251-1.png]]
346 +[[image:1657091257648-882.png]]
339 339  )))
340 340  
341 341  (((
... ... @@ -343,6 +343,7 @@
343 343  )))
344 344  
345 345  
354 +
346 346  == 4.1  Create a gateway in TTN V3 Server ==
347 347  
348 348  
... ... @@ -392,6 +392,8 @@
392 392  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
393 393  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
394 394  
404 +
405 +
395 395  (% style="color:blue" %)**Step 4: Create a Gateway**
396 396  
397 397  
... ... @@ -420,6 +420,7 @@
420 420  [[image:1657094130908-567.png]](% style="display:none" %)
421 421  
422 422  
434 +
423 423  == 4.2  Configure LPS8N to connect to TTN v3 ==
424 424  
425 425  
... ... @@ -455,6 +455,7 @@
455 455  [[image:1657094221515-510.png]]
456 456  
457 457  
470 +
458 458  == 4.3  Configure frequency ==
459 459  
460 460  
... ... @@ -470,6 +470,7 @@
470 470   [[image:1657094333704-207.png]]
471 471  
472 472  
486 +
473 473  == 4.4  Add a LoRaWAN End Device ==
474 474  
475 475  
... ... @@ -575,8 +575,10 @@
575 575  [[image:1657094791060-639.png]]
576 576  
577 577  
592 +
578 578  = 5.  Web Configure Pages =
579 579  
595 +
580 580  == 5.1  Home ==
581 581  
582 582  
... ... @@ -586,8 +586,10 @@
586 586  [[image:1657094893942-726.png]]
587 587  
588 588  
605 +
589 589  == 5.2  LoRa Settings ==
590 590  
608 +
591 591  === 5.2.1  LoRa ~-~-> LoRa ===
592 592  
593 593  
... ... @@ -617,6 +617,7 @@
617 617  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
618 618  
619 619  
638 +
620 620  === 5.2.2  LoRa ~-~-> ABP Decryption ===
621 621  
622 622  
... ... @@ -634,8 +634,10 @@
634 634  [[image:1657095412271-942.png]]
635 635  
636 636  
656 +
637 637  == 5.3  LoRaWAN Settings ==
638 638  
659 +
639 639  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
640 640  
641 641  
... ... @@ -654,31 +654,17 @@
654 654  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
655 655  
656 656  
657 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
658 658  
679 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
659 659  
660 -[[image:image-20230406172421-1.png]]
661 661  
682 +[[image:1652428499323-384.png||height="275" width="723"]]
662 662  
684 +
663 663  (((
664 -Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
686 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
665 665  
666 666  
667 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
668 -
669 -Instruction:
670 -
671 - [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
672 -
673 - [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
674 -
675 - [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
676 -
677 - ThingPark
678 -
679 - [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
680 -
681 -
682 682  
683 683  )))
684 684  
... ... @@ -698,6 +698,7 @@
698 698  [[image:1652428648903-878.png||height="266" width="731"]]
699 699  
700 700  
708 +
701 701  == 5.4  MQTT Settings ==
702 702  
703 703  
... ... @@ -713,8 +713,10 @@
713 713  [[image:1652428705046-212.png||height="417" width="733"]]
714 714  
715 715  
724 +
716 716  == 5.5  System ==
717 717  
727 +
718 718  === 5.5.1  System ~-~-> System Overview ===
719 719  
720 720  
... ... @@ -721,9 +721,10 @@
721 721  Shows the system info:
722 722  
723 723  
724 -[[image:image-20220826091810-6.png]]
734 +[[image:1657155158184-134.png]]
725 725  
726 726  
737 +
727 727  === 5.5.2  System ~-~-> General ( login settings) ===
728 728  
729 729  
... ... @@ -749,6 +749,7 @@
749 749  (((
750 750  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
751 751  
763 +
752 752  
753 753  )))
754 754  
... ... @@ -769,6 +769,7 @@
769 769  (((
770 770  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
771 771  
784 +
772 772  
773 773  )))
774 774  
... ... @@ -781,6 +781,7 @@
781 781  [[image:1657155457089-430.png]]
782 782  
783 783  
797 +
784 784  === 5.5.5  System ~-~-> Cellular ===
785 785  
786 786  
... ... @@ -793,6 +793,7 @@
793 793  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
794 794  
795 795  
810 +
796 796  === 5.5.6  System ~-~-> Network Status ===
797 797  
798 798  
... ... @@ -799,6 +799,7 @@
799 799  [[image:1657155554265-721.png]]
800 800  
801 801  
817 +
802 802  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
803 803  
804 804  
... ... @@ -815,7 +815,7 @@
815 815  
816 816  (% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
817 817  
818 -[[image:image-20220826091725-5.png||height="479" width="1004"]]
834 +[[image:image-20220707092040-3.png||height="449" width="956"]]
819 819  
820 820  
821 821  (((
... ... @@ -833,6 +833,7 @@
833 833  [[image:1652429624400-864.png||height="432" width="716"]]
834 834  
835 835  
852 +
836 836  === 5.5.8  System ~-~-> Firmware Upgrade ===
837 837  
838 838  
... ... @@ -890,6 +890,7 @@
890 890  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
891 891  
892 892  
910 +
893 893  === 5.5.9  System ~-~-> Reboot/Reset ===
894 894  
895 895  
... ... @@ -897,6 +897,8 @@
897 897  
898 898  (((
899 899  
918 +
919 +
900 900  )))
901 901  
902 902  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -908,8 +908,10 @@
908 908  Place to show what package has installed and possible to upgrade packages.
909 909  
910 910  
931 +
911 911  == 5.6  LogRead ==
912 912  
934 +
913 913  === 5.6.1  LogRead ~-~-> LoRa Log ===
914 914  
915 915  
... ... @@ -919,6 +919,7 @@
919 919  [[image:1657156300781-933.png]]
920 920  
921 921  
944 +
922 922  === 5.6.2  LogRead ~-~-> System Log ===
923 923  
924 924  
... ... @@ -928,8 +928,10 @@
928 928  [[image:1657156341198-226.png]]
929 929  
930 930  
954 +
931 931  = 6.  More features =
932 932  
957 +
933 933  == 6.1 Packet Filtering ==
934 934  
935 935  
... ... @@ -942,6 +942,7 @@
942 942  )))
943 943  
944 944  
970 +
945 945  == 6.2 Remote Access ==
946 946  
947 947  
... ... @@ -954,6 +954,7 @@
954 954  )))
955 955  
956 956  
983 +
957 957  == 6.3 How to decode ABP LoRaWAN node ==
958 958  
959 959  
... ... @@ -966,6 +966,7 @@
966 966  )))
967 967  
968 968  
996 +
969 969  == 6.4 How to set data to MQTT broker ==
970 970  
971 971  
... ... @@ -975,78 +975,20 @@
975 975  
976 976  (((
977 977  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
978 -
979 -
980 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
981 -
982 -
983 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
984 -
985 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
986 -
987 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
988 -
989 -
990 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
991 -
992 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
993 -
994 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
995 -
996 -
997 997  )))
998 998  
999 -(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
1000 1000  
1001 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1002 1002  
1010 +== 6.5  More instructions ==
1003 1003  
1004 -== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1005 1005  
1006 -
1007 -USB card reader plugged into the USB port of the gateway
1008 -
1009 -
1010 -Access the gateway Linux Command Line
1011 -
1012 -
1013 -Check the USB device
1014 -
1015 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1016 -
1017 -
1018 -**Mount the USB device**
1019 -
1020 -(% class="box infomessage" %)
1021 -(((
1022 -**mount /dev/sda1 /mnt/**
1023 -)))
1024 -
1025 -(% class="wikigeneratedid" %)
1026 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1027 -
1028 -
1029 -(% class="wikigeneratedid" %)
1030 -**Set up the automatic mount on boot**
1031 -
1032 -(% class="box infomessage" %)
1033 -(((
1034 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1035 -)))
1036 -
1037 -(% class="wikigeneratedid" %)
1038 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1039 -
1040 -
1041 -== 6.7  More instructions ==
1042 -
1043 -
1044 1044  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1045 1045  
1046 1046  
1047 -== 6.8  Auto-Provision ==
1048 1048  
1017 +== 6.6  Auto-Provision ==
1049 1049  
1019 +
1050 1050  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1051 1051  
1052 1052  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -1053,7 +1053,7 @@
1053 1053  
1054 1054  [[image:image-20220707092040-2.png||height="452" width="1002"]]
1055 1055  
1056 -[[image:image-20220826091546-4.png]](% style="display:none" %)
1026 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
1057 1057  
1058 1058  
1059 1059  (((
... ... @@ -1062,6 +1062,7 @@
1062 1062  
1063 1063  (% style="display:none" %) (%%)
1064 1064  
1035 +
1065 1065  = 7.  (% style="display:none" %) (%%)Linux System =
1066 1066  
1067 1067  
... ... @@ -1069,6 +1069,7 @@
1069 1069  
1070 1070  (% style="display:none" %) (%%)
1071 1071  
1043 +
1072 1072  == 7.1  SSH Access for Linux console ==
1073 1073  
1074 1074  
... ... @@ -1094,6 +1094,7 @@
1094 1094  [[image:1657158190234-805.png]]
1095 1095  
1096 1096  
1069 +
1097 1097  == 7.2  Edit and Transfer files ==
1098 1098  
1099 1099  
... ... @@ -1116,6 +1116,7 @@
1116 1116  [[image:1652431650755-450.png]]
1117 1117  
1118 1118  
1092 +
1119 1119  == 7.3  File System ==
1120 1120  
1121 1121  
... ... @@ -1132,6 +1132,7 @@
1132 1132  )))
1133 1133  
1134 1134  
1109 +
1135 1135  == 7.4  Package maintenance system ==
1136 1136  
1137 1137  
... ... @@ -1187,6 +1187,7 @@
1187 1187  (((
1188 1188  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1189 1189  
1165 +
1190 1190  
1191 1191  )))
1192 1192  
... ... @@ -1209,6 +1209,7 @@
1209 1209  )))
1210 1210  
1211 1211  
1188 +
1212 1212  == 8.1 Upgrade via Web UI ==
1213 1213  
1214 1214  
... ... @@ -1235,6 +1235,7 @@
1235 1235  [[image:1657158986600-386.png]]
1236 1236  
1237 1237  
1215 +
1238 1238  == 8.2 Upgrade via Linux console ==
1239 1239  
1240 1240  
... ... @@ -1252,17 +1252,13 @@
1252 1252  )))
1253 1253  
1254 1254  
1255 -= 9.  OTA System Update =
1256 1256  
1234 += 9.  FAQ =
1257 1257  
1258 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1259 1259  
1237 +== 9.1  How can I configure for a customized frequency band? ==
1260 1260  
1261 -= 10.  FAQ =
1262 1262  
1263 -== 10.1  How can I configure for a customized frequency band? ==
1264 -
1265 -
1266 1266  (((
1267 1267  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1268 1268  )))
... ... @@ -1269,9 +1269,11 @@
1269 1269  
1270 1270  (((
1271 1271  
1246 +
1247 +
1272 1272  )))
1273 1273  
1274 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1250 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1275 1275  
1276 1276  
1277 1277  (((
... ... @@ -1284,19 +1284,23 @@
1284 1284  
1285 1285  (((
1286 1286  
1263 +
1264 +
1287 1287  )))
1288 1288  
1289 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1267 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1290 1290  
1291 1291  
1292 1292  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1293 1293  
1294 1294  
1295 -= 11.  Trouble Shooting =
1296 1296  
1297 -== 11.1  I get kernel error when install new package, how to fix? ==
1274 += 10.  Trouble Shooting =
1298 1298  
1299 1299  
1277 +== 10.1  I get kernel error when install new package, how to fix? ==
1278 +
1279 +
1300 1300  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1301 1301  
1302 1302  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1318,9 +1318,10 @@
1318 1318  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1319 1319  
1320 1320  
1321 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1322 1322  
1302 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1323 1323  
1304 +
1324 1324  (((
1325 1325  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1326 1326  )))
... ... @@ -1327,12 +1327,14 @@
1327 1327  
1328 1328  (((
1329 1329  
1311 +
1312 +
1330 1330  )))
1331 1331  
1332 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1315 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1333 1333  
1334 1334  
1335 -[[image:image-20231116112906-1.png]]
1318 +[[image:1657159323292-776.png]]
1336 1336  
1337 1337  
1338 1338  (((
... ... @@ -1344,7 +1344,7 @@
1344 1344  
1345 1345  **Steps to connect via fall back IP:**
1346 1346  
1347 -~1. Connect PC's Ethernet port to LPS8N's WAN port
1330 +~1. Connect PC's Ethernet port to LG01's WAN port
1348 1348  
1349 1349  2. Configure PC's Ethernet port has
1350 1350   IP: 172.31.255.253 and
... ... @@ -1361,9 +1361,10 @@
1361 1361  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1362 1362  
1363 1363  
1364 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1365 1365  
1348 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1366 1366  
1350 +
1367 1367  (((
1368 1368  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1369 1369  )))
... ... @@ -1373,34 +1373,37 @@
1373 1373  )))
1374 1374  
1375 1375  
1376 -= 12.  Order Info =
1377 1377  
1361 += 11.  Order Info =
1378 1378  
1379 -**PART: (% style="color:blue" %)LPS8N-XXX-YYY: (%%)**
1380 1380  
1381 -(% style="color:blue" %) **XXX:**(%%)** Frequency Band**
1364 +**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1382 1382  
1366 +
1367 +(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1368 +
1383 1383  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1384 1384  * (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1385 1385  
1386 -(% style="color:blue" %) **YYY:**(%%)** 4G Cellular Option**
1372 +(% style="color:blue" %) **//YYY~://**(%%)**// 4G Cellular Option//**
1387 1387  
1388 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1389 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1390 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1391 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1374 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1375 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1376 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1377 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1392 1392  
1393 1393  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1394 1394  
1395 1395  
1396 -= 13.  Packing Info =
1397 1397  
1383 += 12.  Packing Info =
1398 1398  
1385 +
1399 1399  (((
1400 1400  **Package Includes**:
1401 1401  )))
1402 1402  
1403 -* LPS8N LoRaWAN Gateway x 1
1390 +* DLOS8N LoRaWAN Gateway x 1
1404 1404  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1405 1405  * Packaging with environmental protection paper box
1406 1406  
... ... @@ -1414,12 +1414,14 @@
1414 1414  * Weight: 300g
1415 1415  
1416 1416  
1417 -= 14.  Support =
1418 1418  
1419 1419  
1406 += 13.  Support =
1407 +
1420 1420  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1421 1421  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1422 1422  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1423 1423  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1424 1424  
1413 +
1425 1425  
image-20220826090251-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -146.0 KB
Content
image-20220826090430-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826090449-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826091546-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091725-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091810-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content
image-20230406172421-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.6 KB
Content
image-20231116112906-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -76.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0