Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 177.1 >
edited by Kilight Cao
on 2023/04/26 15:53
To version < 169.1 >
edited by Kilight Cao
on 2022/12/15 14:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -15,9 +15,11 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
22 +
21 21  (((
22 22  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
... ... @@ -32,6 +32,8 @@
32 32  
33 33  (((
34 34  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
37 +
38 +
35 35  )))
36 36  
37 37  (((
... ... @@ -41,6 +41,7 @@
41 41  [[image:image-20220826090251-1.png]]
42 42  
43 43  
48 +
44 44  == 1.2  Specifications ==
45 45  
46 46  
... ... @@ -120,6 +120,7 @@
120 120  [[image:image-20220830153228-1.png]]
121 121  
122 122  
128 +
123 123  == 1.5  LPS8N Applications ==
124 124  
125 125  
... ... @@ -126,6 +126,7 @@
126 126  [[image:1657079055940-721.png]]
127 127  
128 128  
135 +
129 129  == 1.6  LED Indicators ==
130 130  
131 131  
... ... @@ -140,6 +140,7 @@
140 140  
141 141  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
142 142  
150 +
143 143  == 1.7 Button Instruction ==
144 144  
145 145  
... ... @@ -164,8 +164,10 @@
164 164  )))
165 165  
166 166  
175 +
167 167  == 2.1  Find IP address of LPS8N ==
168 168  
178 +
169 169  === 2.1.1  Connect via WiFi ===
170 170  
171 171  
... ... @@ -181,6 +181,7 @@
181 181  (((
182 182  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
183 183  
194 +
184 184  
185 185  )))
186 186  
... ... @@ -193,6 +193,7 @@
193 193  (((
194 194  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
195 195  
207 +
196 196  
197 197  )))
198 198  
... ... @@ -205,6 +205,7 @@
205 205  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
206 206  
207 207  
220 +
208 208  === 2.1.4  Connect via Ethernet with fall back ip ===
209 209  
210 210  
... ... @@ -211,6 +211,7 @@
211 211  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
212 212  
213 213  
227 +
214 214  == 2.2  Access Configure Web UI ==
215 215  
216 216  
... ... @@ -236,8 +236,10 @@
236 236  [[image:1652414287022-223.png]]
237 237  
238 238  
253 +
239 239  = 3.  Typical Network Setup =
240 240  
256 +
241 241  == 3.1  Overview ==
242 242  
243 243  
... ... @@ -256,6 +256,7 @@
256 256  [[image:1657088560833-398.png]]
257 257  
258 258  
275 +
259 259  == 3.3  Access the Internet as a WiFi Client ==
260 260  
261 261  
... ... @@ -272,6 +272,7 @@
272 272  (((
273 273  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
274 274  
292 +
275 275  
276 276  )))
277 277  
... ... @@ -315,6 +315,7 @@
315 315  )))
316 316  
317 317  
336 +
318 318  == 3.5  Check Internet connection ==
319 319  
320 320  
... ... @@ -327,6 +327,7 @@
327 327  [[image:1657091099235-452.png]]
328 328  
329 329  
349 +
330 330  = 4.  Example: Configure as a LoRaWAN gateway =
331 331  
332 332  
... ... @@ -342,6 +342,7 @@
342 342  )))
343 343  
344 344  
365 +
345 345  == 4.1  Create a gateway in TTN V3 Server ==
346 346  
347 347  
... ... @@ -419,6 +419,7 @@
419 419  [[image:1657094130908-567.png]](% style="display:none" %)
420 420  
421 421  
443 +
422 422  == 4.2  Configure LPS8N to connect to TTN v3 ==
423 423  
424 424  
... ... @@ -454,6 +454,7 @@
454 454  [[image:1657094221515-510.png]]
455 455  
456 456  
479 +
457 457  == 4.3  Configure frequency ==
458 458  
459 459  
... ... @@ -469,6 +469,7 @@
469 469   [[image:1657094333704-207.png]]
470 470  
471 471  
495 +
472 472  == 4.4  Add a LoRaWAN End Device ==
473 473  
474 474  
... ... @@ -574,8 +574,10 @@
574 574  [[image:1657094791060-639.png]]
575 575  
576 576  
601 +
577 577  = 5.  Web Configure Pages =
578 578  
604 +
579 579  == 5.1  Home ==
580 580  
581 581  
... ... @@ -585,8 +585,10 @@
585 585  [[image:1657094893942-726.png]]
586 586  
587 587  
614 +
588 588  == 5.2  LoRa Settings ==
589 589  
617 +
590 590  === 5.2.1  LoRa ~-~-> LoRa ===
591 591  
592 592  
... ... @@ -616,6 +616,7 @@
616 616  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
617 617  
618 618  
647 +
619 619  === 5.2.2  LoRa ~-~-> ABP Decryption ===
620 620  
621 621  
... ... @@ -633,8 +633,10 @@
633 633  [[image:1657095412271-942.png]]
634 634  
635 635  
665 +
636 636  == 5.3  LoRaWAN Settings ==
637 637  
668 +
638 638  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
639 639  
640 640  
... ... @@ -653,29 +653,18 @@
653 653  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
654 654  
655 655  
656 -=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
657 657  
688 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
658 658  
659 -[[image:image-20230406172421-1.png]]
660 660  
691 +[[image:1652428499323-384.png||height="275" width="723"]]
661 661  
693 +
662 662  (((
663 -Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
695 +Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
664 664  
665 665  
666 -The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
667 -
668 -Instruction:
669 -
670 - [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
671 -
672 - [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
673 -
674 - [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
675 -
676 - ThingPark
677 -
678 - [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
698 +
679 679  )))
680 680  
681 681  === 5.3.3  LoRaWAN ~-~-> LORIOT ===
... ... @@ -694,6 +694,7 @@
694 694  [[image:1652428648903-878.png||height="266" width="731"]]
695 695  
696 696  
717 +
697 697  == 5.4  MQTT Settings ==
698 698  
699 699  
... ... @@ -709,8 +709,10 @@
709 709  [[image:1652428705046-212.png||height="417" width="733"]]
710 710  
711 711  
733 +
712 712  == 5.5  System ==
713 713  
736 +
714 714  === 5.5.1  System ~-~-> System Overview ===
715 715  
716 716  
... ... @@ -720,6 +720,7 @@
720 720  [[image:image-20220826091810-6.png]]
721 721  
722 722  
746 +
723 723  === 5.5.2  System ~-~-> General ( login settings) ===
724 724  
725 725  
... ... @@ -745,6 +745,7 @@
745 745  (((
746 746  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
747 747  
772 +
748 748  
749 749  )))
750 750  
... ... @@ -765,6 +765,7 @@
765 765  (((
766 766  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
767 767  
793 +
768 768  
769 769  )))
770 770  
... ... @@ -777,6 +777,7 @@
777 777  [[image:1657155457089-430.png]]
778 778  
779 779  
806 +
780 780  === 5.5.5  System ~-~-> Cellular ===
781 781  
782 782  
... ... @@ -789,6 +789,7 @@
789 789  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
790 790  
791 791  
819 +
792 792  === 5.5.6  System ~-~-> Network Status ===
793 793  
794 794  
... ... @@ -795,6 +795,7 @@
795 795  [[image:1657155554265-721.png]]
796 796  
797 797  
826 +
798 798  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
799 799  
800 800  
... ... @@ -829,6 +829,7 @@
829 829  [[image:1652429624400-864.png||height="432" width="716"]]
830 830  
831 831  
861 +
832 832  === 5.5.8  System ~-~-> Firmware Upgrade ===
833 833  
834 834  
... ... @@ -886,6 +886,7 @@
886 886  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
887 887  
888 888  
919 +
889 889  === 5.5.9  System ~-~-> Reboot/Reset ===
890 890  
891 891  
... ... @@ -893,6 +893,8 @@
893 893  
894 894  (((
895 895  
927 +
928 +
896 896  )))
897 897  
898 898  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -904,8 +904,10 @@
904 904  Place to show what package has installed and possible to upgrade packages.
905 905  
906 906  
940 +
907 907  == 5.6  LogRead ==
908 908  
943 +
909 909  === 5.6.1  LogRead ~-~-> LoRa Log ===
910 910  
911 911  
... ... @@ -915,6 +915,7 @@
915 915  [[image:1657156300781-933.png]]
916 916  
917 917  
953 +
918 918  === 5.6.2  LogRead ~-~-> System Log ===
919 919  
920 920  
... ... @@ -924,8 +924,10 @@
924 924  [[image:1657156341198-226.png]]
925 925  
926 926  
963 +
927 927  = 6.  More features =
928 928  
966 +
929 929  == 6.1 Packet Filtering ==
930 930  
931 931  
... ... @@ -938,6 +938,7 @@
938 938  )))
939 939  
940 940  
979 +
941 941  == 6.2 Remote Access ==
942 942  
943 943  
... ... @@ -950,6 +950,7 @@
950 950  )))
951 951  
952 952  
992 +
953 953  == 6.3 How to decode ABP LoRaWAN node ==
954 954  
955 955  
... ... @@ -962,6 +962,7 @@
962 962  )))
963 963  
964 964  
1005 +
965 965  == 6.4 How to set data to MQTT broker ==
966 966  
967 967  
... ... @@ -971,78 +971,20 @@
971 971  
972 972  (((
973 973  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
974 -
975 -
976 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
977 -
978 -
979 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
980 -
981 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
982 -
983 -Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
984 -
985 -
986 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
987 -
988 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
989 -
990 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
991 -
992 -
993 993  )))
994 994  
995 -(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
996 996  
997 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
998 998  
1019 +== 6.5  More instructions ==
999 999  
1000 -== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1001 1001  
1002 -
1003 -USB card reader plugged into the USB port of the gateway
1004 -
1005 -
1006 -Access the gateway Linux Command Line
1007 -
1008 -
1009 -Check the USB device
1010 -
1011 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1012 -
1013 -
1014 -**Mount the USB device**
1015 -
1016 -(% class="box infomessage" %)
1017 -(((
1018 -**mount /dev/sda1 /mnt/**
1019 -)))
1020 -
1021 -(% class="wikigeneratedid" %)
1022 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1023 -
1024 -
1025 -(% class="wikigeneratedid" %)
1026 -**Set up the automatic mount on boot**
1027 -
1028 -(% class="box infomessage" %)
1029 -(((
1030 -**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1031 -)))
1032 -
1033 -(% class="wikigeneratedid" %)
1034 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1035 -
1036 -
1037 -== 6.7  More instructions ==
1038 -
1039 -
1040 1040  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1041 1041  
1042 1042  
1043 -== 6.8  Auto-Provision ==
1044 1044  
1026 +== 6.6  Auto-Provision ==
1045 1045  
1028 +
1046 1046  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1047 1047  
1048 1048  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -1058,6 +1058,7 @@
1058 1058  
1059 1059  (% style="display:none" %) (%%)
1060 1060  
1044 +
1061 1061  = 7.  (% style="display:none" %) (%%)Linux System =
1062 1062  
1063 1063  
... ... @@ -1065,6 +1065,7 @@
1065 1065  
1066 1066  (% style="display:none" %) (%%)
1067 1067  
1052 +
1068 1068  == 7.1  SSH Access for Linux console ==
1069 1069  
1070 1070  
... ... @@ -1090,6 +1090,7 @@
1090 1090  [[image:1657158190234-805.png]]
1091 1091  
1092 1092  
1078 +
1093 1093  == 7.2  Edit and Transfer files ==
1094 1094  
1095 1095  
... ... @@ -1112,6 +1112,7 @@
1112 1112  [[image:1652431650755-450.png]]
1113 1113  
1114 1114  
1101 +
1115 1115  == 7.3  File System ==
1116 1116  
1117 1117  
... ... @@ -1128,6 +1128,7 @@
1128 1128  )))
1129 1129  
1130 1130  
1118 +
1131 1131  == 7.4  Package maintenance system ==
1132 1132  
1133 1133  
... ... @@ -1183,6 +1183,7 @@
1183 1183  (((
1184 1184  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1185 1185  
1174 +
1186 1186  
1187 1187  )))
1188 1188  
... ... @@ -1205,6 +1205,7 @@
1205 1205  )))
1206 1206  
1207 1207  
1197 +
1208 1208  == 8.1 Upgrade via Web UI ==
1209 1209  
1210 1210  
... ... @@ -1231,6 +1231,7 @@
1231 1231  [[image:1657158986600-386.png]]
1232 1232  
1233 1233  
1224 +
1234 1234  == 8.2 Upgrade via Linux console ==
1235 1235  
1236 1236  
... ... @@ -1248,17 +1248,13 @@
1248 1248  )))
1249 1249  
1250 1250  
1251 -= 9.  OTA System Update =
1252 1252  
1243 += 9.  FAQ =
1253 1253  
1254 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1255 1255  
1246 +== 9.1  How can I configure for a customized frequency band? ==
1256 1256  
1257 -= 10.  FAQ =
1258 1258  
1259 -== 10.1  How can I configure for a customized frequency band? ==
1260 -
1261 -
1262 1262  (((
1263 1263  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1264 1264  )))
... ... @@ -1265,9 +1265,11 @@
1265 1265  
1266 1266  (((
1267 1267  
1255 +
1256 +
1268 1268  )))
1269 1269  
1270 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1259 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1271 1271  
1272 1272  
1273 1273  (((
... ... @@ -1280,19 +1280,23 @@
1280 1280  
1281 1281  (((
1282 1282  
1272 +
1273 +
1283 1283  )))
1284 1284  
1285 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1276 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1286 1286  
1287 1287  
1288 1288  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1289 1289  
1290 1290  
1291 -= 11.  Trouble Shooting =
1292 1292  
1293 -== 11.1  I get kernel error when install new package, how to fix? ==
1283 += 10.  Trouble Shooting =
1294 1294  
1295 1295  
1286 +== 10.1  I get kernel error when install new package, how to fix? ==
1287 +
1288 +
1296 1296  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1297 1297  
1298 1298  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1314,9 +1314,10 @@
1314 1314  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1315 1315  
1316 1316  
1317 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1318 1318  
1311 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1319 1319  
1313 +
1320 1320  (((
1321 1321  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1322 1322  )))
... ... @@ -1323,9 +1323,11 @@
1323 1323  
1324 1324  (((
1325 1325  
1320 +
1321 +
1326 1326  )))
1327 1327  
1328 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1324 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1329 1329  
1330 1330  
1331 1331  [[image:1657159323292-776.png]]
... ... @@ -1357,9 +1357,10 @@
1357 1357  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1358 1358  
1359 1359  
1360 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1361 1361  
1357 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1362 1362  
1359 +
1363 1363  (((
1364 1364  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1365 1365  )))
... ... @@ -1369,11 +1369,13 @@
1369 1369  )))
1370 1370  
1371 1371  
1372 -= 12.  Order Info =
1373 1373  
1370 += 11.  Order Info =
1374 1374  
1372 +
1375 1375  **//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1376 1376  
1375 +
1377 1377  (% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1378 1378  
1379 1379  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -1389,9 +1389,10 @@
1389 1389  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1390 1390  
1391 1391  
1392 -= 13.  Packing Info =
1393 1393  
1392 += 12.  Packing Info =
1394 1394  
1394 +
1395 1395  (((
1396 1396  **Package Includes**:
1397 1397  )))
... ... @@ -1409,7 +1409,7 @@
1409 1409  * Package Size: 14.5 x 13.5 x 6 cm
1410 1410  * Weight: 300g
1411 1411  
1412 -= 14.  Support =
1412 += 13.  Support =
1413 1413  
1414 1414  
1415 1415  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
... ... @@ -1416,5 +1416,3 @@
1416 1416  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1417 1417  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1418 1418  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1419 -
1420 -
image-20230406172421-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -85.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0