Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -15,9 +15,11 @@
15	15
16	16	= 1.  Introduction =
17	17
	18	+
18	18	== 1.1  What is the LPS8N ==
19	19
20	20
	22	+
21	21	(((
22	22	The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23	23	)))
...	...	@@ -32,6 +32,8 @@
32	32
33	33	(((
34	34	LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
	37	+
	38	+
35	35	)))
36	36
37	37	(((
...	...	@@ -41,6 +41,7 @@
41	41	[[image:image-20220826090251-1.png]]
42	42
43	43
	48	+
44	44	== 1.2  Specifications ==
45	45
46	46
...	...	@@ -97,7 +97,6 @@
97	97	* Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
98	98	* MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
99	99
100		-
101	101	== 1.3  Features ==
102	102
103	103
...	...	@@ -115,7 +115,6 @@
115	115	* Support LoRaWAN basic station.
116	116	* Optional 3G/4G cellular connection
117	117
118		-
119	119	== 1.4  Hardware System Structure ==
120	120
121	121
...	...	@@ -122,6 +122,7 @@
122	122	[[image:image-20220830153228-1.png]]
123	123
124	124
	128	+
125	125	== 1.5  LPS8N Applications ==
126	126
127	127
...	...	@@ -128,6 +128,7 @@
128	128	[[image:1657079055940-721.png]]
129	129
130	130
	135	+
131	131	== 1.6  LED Indicators ==
132	132
133	133
...	...	@@ -167,8 +167,10 @@
167	167	)))
168	168
169	169
	175	+
170	170	== 2.1  Find IP address of LPS8N ==
171	171
	178	+
172	172	=== 2.1.1  Connect via WiFi ===
173	173
174	174
...	...	@@ -184,6 +184,7 @@
184	184	(((
185	185	User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
186	186
	194	+
187	187
188	188	)))
189	189
...	...	@@ -196,6 +196,7 @@
196	196	(((
197	197	Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
198	198
	207	+
199	199
200	200	)))
201	201
...	...	@@ -208,6 +208,7 @@
208	208	If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
209	209
210	210
	220	+
211	211	=== 2.1.4  Connect via Ethernet with fall back ip ===
212	212
213	213
...	...	@@ -214,6 +214,7 @@
214	214	The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
215	215
216	216
	227	+
217	217	== 2.2  Access Configure Web UI ==
218	218
219	219
...	...	@@ -239,8 +239,10 @@
239	239	[[image:1652414287022-223.png]]
240	240
241	241
	253	+
242	242	= 3.  Typical Network Setup =
243	243
	256	+
244	244	== 3.1  Overview ==
245	245
246	246
...	...	@@ -250,7 +250,6 @@
250	250	* **WiFi Client Mode**
251	251	* **WiFi AP Mode**
252	252
253		-
254	254	== 3.2  Use WAN port to access Internet ==
255	255
256	256
...	...	@@ -260,6 +260,7 @@
260	260	[[image:1657088560833-398.png]]
261	261
262	262
	275	+
263	263	== 3.3  Access the Internet as a WiFi Client ==
264	264
265	265
...	...	@@ -276,6 +276,7 @@
276	276	(((
277	277	In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
278	278
	292	+
279	279
280	280	)))
281	281
...	...	@@ -319,6 +319,7 @@
319	319	)))
320	320
321	321
	336	+
322	322	== 3.5  Check Internet connection ==
323	323
324	324
...	...	@@ -331,6 +331,7 @@
331	331	[[image:1657091099235-452.png]]
332	332
333	333
	349	+
334	334	= 4.  Example: Configure as a LoRaWAN gateway =
335	335
336	336
...	...	@@ -346,6 +346,7 @@
346	346	)))
347	347
348	348
	365	+
349	349	== 4.1  Create a gateway in TTN V3 Server ==
350	350
351	351
...	...	@@ -423,6 +423,7 @@
423	423	[[image:1657094130908-567.png]](% style="display:none" %)
424	424
425	425
	443	+
426	426	== 4.2  Configure LPS8N to connect to TTN v3 ==
427	427
428	428
...	...	@@ -458,6 +458,7 @@
458	458	[[image:1657094221515-510.png]]
459	459
460	460
	479	+
461	461	== 4.3  Configure frequency ==
462	462
463	463
...	...	@@ -473,6 +473,7 @@
473	473	[[image:1657094333704-207.png]]
474	474
475	475
	495	+
476	476	== 4.4  Add a LoRaWAN End Device ==
477	477
478	478
...	...	@@ -578,8 +578,10 @@
578	578	[[image:1657094791060-639.png]]
579	579
580	580
	601	+
581	581	= 5.  Web Configure Pages =
582	582
	604	+
583	583	== 5.1  Home ==
584	584
585	585
...	...	@@ -589,8 +589,10 @@
589	589	[[image:1657094893942-726.png]]
590	590
591	591
	614	+
592	592	== 5.2  LoRa Settings ==
593	593
	617	+
594	594	=== 5.2.1  LoRa ~-~-> LoRa ===
595	595
596	596
...	...	@@ -620,6 +620,7 @@
620	620	(% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
621	621
622	622
	647	+
623	623	=== 5.2.2  LoRa ~-~-> ABP Decryption ===
624	624
625	625
...	...	@@ -637,8 +637,10 @@
637	637	[[image:1657095412271-942.png]]
638	638
639	639
	665	+
640	640	== 5.3  LoRaWAN Settings ==
641	641
	668	+
642	642	=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
643	643
644	644
...	...	@@ -657,6 +657,7 @@
657	657	**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
658	658
659	659
	687	+
660	660	=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
661	661
662	662
...	...	@@ -666,6 +666,7 @@
666	666	(((
667	667	Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
668	668
	697	+
669	669
670	670	)))
671	671
...	...	@@ -685,6 +685,7 @@
685	685	[[image:1652428648903-878.png||height="266" width="731"]]
686	686
687	687
	717	+
688	688	== 5.4  MQTT Settings ==
689	689
690	690
...	...	@@ -700,8 +700,10 @@
700	700	[[image:1652428705046-212.png||height="417" width="733"]]
701	701
702	702
	733	+
703	703	== 5.5  System ==
704	704
	736	+
705	705	=== 5.5.1  System ~-~-> System Overview ===
706	706
707	707
...	...	@@ -711,6 +711,7 @@
711	711	[[image:image-20220826091810-6.png]]
712	712
713	713
	746	+
714	714	=== 5.5.2  System ~-~-> General ( login settings) ===
715	715
716	716
...	...	@@ -736,6 +736,7 @@
736	736	(((
737	737	(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
738	738
	772	+
739	739
740	740	)))
741	741
...	...	@@ -756,6 +756,7 @@
756	756	(((
757	757	(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
758	758
	793	+
759	759
760	760	)))
761	761
...	...	@@ -768,6 +768,7 @@
768	768	[[image:1657155457089-430.png]]
769	769
770	770
	806	+
771	771	=== 5.5.5  System ~-~-> Cellular ===
772	772
773	773
...	...	@@ -780,6 +780,7 @@
780	780	(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
781	781
782	782
	819	+
783	783	=== 5.5.6  System ~-~-> Network Status ===
784	784
785	785
...	...	@@ -786,6 +786,7 @@
786	786	[[image:1657155554265-721.png]]
787	787
788	788
	826	+
789	789	=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
790	790
791	791
...	...	@@ -820,6 +820,7 @@
820	820	[[image:1652429624400-864.png||height="432" width="716"]]
821	821
822	822
	861	+
823	823	=== 5.5.8  System ~-~-> Firmware Upgrade ===
824	824
825	825
...	...	@@ -877,6 +877,7 @@
877	877	(% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
878	878
879	879
	919	+
880	880	=== 5.5.9  System ~-~-> Reboot/Reset ===
881	881
882	882
...	...	@@ -884,6 +884,8 @@
884	884
885	885	(((
886	886
	927	+
	928	+
887	887	)))
888	888
889	889	=== 5.5.10  System ~-~-> Package Maintain ===
...	...	@@ -895,8 +895,10 @@
895	895	Place to show what package has installed and possible to upgrade packages.
896	896
897	897
	940	+
898	898	== 5.6  LogRead ==
899	899
	943	+
900	900	=== 5.6.1  LogRead ~-~-> LoRa Log ===
901	901
902	902
...	...	@@ -906,6 +906,7 @@
906	906	[[image:1657156300781-933.png]]
907	907
908	908
	953	+
909	909	=== 5.6.2  LogRead ~-~-> System Log ===
910	910
911	911
...	...	@@ -915,8 +915,10 @@
915	915	[[image:1657156341198-226.png]]
916	916
917	917
	963	+
918	918	= 6.  More features =
919	919
	966	+
920	920	== 6.1 Packet Filtering ==
921	921
922	922
...	...	@@ -929,6 +929,7 @@
929	929	)))
930	930
931	931
	979	+
932	932	== 6.2 Remote Access ==
933	933
934	934
...	...	@@ -941,6 +941,7 @@
941	941	)))
942	942
943	943
	992	+
944	944	== 6.3 How to decode ABP LoRaWAN node ==
945	945
946	946
...	...	@@ -953,6 +953,7 @@
953	953	)))
954	954
955	955
	1005	+
956	956	== 6.4 How to set data to MQTT broker ==
957	957
958	958
...	...	@@ -962,41 +962,20 @@
962	962
963	963	(((
964	964	Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
965		-
966		-
967		-== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
968		-
969		-
970		-If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
971		-
972		-[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
973		-
974		-Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
975		-
976		-
977		-If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
978		-
979		-[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
980		-
981		-Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
982		-
983		-
984	984	)))
985	985
986		-(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
987	987
988		-After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
989	989
	1019	+== 6.5  More instructions ==
990	990
991		-== 6.6  More instructions ==
992	992
993		-
994	994	[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
995	995
996	996
997		-== 6.7  Auto-Provision ==
998	998
	1026	+== 6.6  Auto-Provision ==
999	999
	1028	+
1000	1000	Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1001	1001
1002	1002	[[image:image-20220707092040-1.png||height="451" width="995"]]
...	...	@@ -1012,6 +1012,7 @@
1012	1012
1013	1013	(% style="display:none" %) (%%)
1014	1014
	1044	+
1015	1015	= 7.  (% style="display:none" %) (%%)Linux System =
1016	1016
1017	1017
...	...	@@ -1019,6 +1019,7 @@
1019	1019
1020	1020	(% style="display:none" %) (%%)
1021	1021
	1052	+
1022	1022	== 7.1  SSH Access for Linux console ==
1023	1023
1024	1024
...	...	@@ -1044,6 +1044,7 @@
1044	1044	[[image:1657158190234-805.png]]
1045	1045
1046	1046
	1078	+
1047	1047	== 7.2  Edit and Transfer files ==
1048	1048
1049	1049
...	...	@@ -1066,6 +1066,7 @@
1066	1066	[[image:1652431650755-450.png]]
1067	1067
1068	1068
	1101	+
1069	1069	== 7.3  File System ==
1070	1070
1071	1071
...	...	@@ -1082,6 +1082,7 @@
1082	1082	)))
1083	1083
1084	1084
	1118	+
1085	1085	== 7.4  Package maintenance system ==
1086	1086
1087	1087
...	...	@@ -1137,6 +1137,7 @@
1137	1137	(((
1138	1138	(% style="background-color:#dcdcdc" %)//Configuring iperf.//
1139	1139
	1174	+
1140	1140
1141	1141	)))
1142	1142
...	...	@@ -1159,6 +1159,7 @@
1159	1159	)))
1160	1160
1161	1161
	1197	+
1162	1162	== 8.1 Upgrade via Web UI ==
1163	1163
1164	1164
...	...	@@ -1185,6 +1185,7 @@
1185	1185	[[image:1657158986600-386.png]]
1186	1186
1187	1187
	1224	+
1188	1188	== 8.2 Upgrade via Linux console ==
1189	1189
1190	1190
...	...	@@ -1202,17 +1202,13 @@
1202	1202	)))
1203	1203
1204	1204
1205		-= 9.  OTA System Update =
1206	1206
	1243	+= 9.  FAQ =
1207	1207
1208		-LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1209	1209
	1246	+== 9.1  How can I configure for a customized frequency band? ==
1210	1210
1211		-= 10.  FAQ =
1212	1212
1213		-== 10.1  How can I configure for a customized frequency band? ==
1214		-
1215		-
1216	1216	(((
1217	1217	See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1218	1218	)))
...	...	@@ -1219,9 +1219,11 @@
1219	1219
1220	1220	(((
1221	1221
	1255	+
	1256	+
1222	1222	)))
1223	1223
1224		-== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
	1259	+== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1225	1225
1226	1226
1227	1227	(((
...	...	@@ -1234,19 +1234,23 @@
1234	1234
1235	1235	(((
1236	1236
	1272	+
	1273	+
1237	1237	)))
1238	1238
1239		-== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
	1276	+== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1240	1240
1241	1241
1242	1242	It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1243	1243
1244	1244
1245		-= 11.  Trouble Shooting =
1246	1246
1247		-== 11.1  I get kernel error when install new package, how to fix? ==
	1283	+= 10.  Trouble Shooting =
1248	1248
1249	1249
	1286	+== 10.1  I get kernel error when install new package, how to fix? ==
	1287	+
	1288	+
1250	1250	In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1251	1251
1252	1252	(% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
...	...	@@ -1268,9 +1268,10 @@
1268	1268	(% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1269	1269
1270	1270
1271		-== 11.2  How to recover the LPS8N if the firmware crashes ==
1272	1272
	1311	+== 10.2  How to recover the LPS8N if the firmware crashes ==
1273	1273
	1313	+
1274	1274	(((
1275	1275	Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1276	1276	)))
...	...	@@ -1277,9 +1277,11 @@
1277	1277
1278	1278	(((
1279	1279
	1320	+
	1321	+
1280	1280	)))
1281	1281
1282		-== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
	1324	+== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1283	1283
1284	1284
1285	1285	[[image:1657159323292-776.png]]
...	...	@@ -1311,9 +1311,10 @@
1311	1311	Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1312	1312
1313	1313
1314		-== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1315	1315
	1357	+== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1316	1316
	1359	+
1317	1317	(((
1318	1318	This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1319	1319	)))
...	...	@@ -1323,11 +1323,13 @@
1323	1323	)))
1324	1324
1325	1325
1326		-= 12.  Order Info =
1327	1327
	1370	+= 11.  Order Info =
1328	1328
	1372	+
1329	1329	**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1330	1330
	1375	+
1331	1331	(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1332	1332
1333	1333	* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
...	...	@@ -1343,9 +1343,10 @@
1343	1343	More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1344	1344
1345	1345
1346		-= 13.  Packing Info =
1347	1347
	1392	+= 12.  Packing Info =
1348	1348
	1394	+
1349	1349	(((
1350	1350	**Package Includes**:
1351	1351	)))
...	...	@@ -1363,16 +1363,10 @@
1363	1363	* Package Size: 14.5 x 13.5 x 6 cm
1364	1364	* Weight: 300g
1365	1365
	1412	+= 13.  Support =
1366	1366
1367		-= 14.  Support =
1368	1368
1369		-
1370	1370	* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1371	1371	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1372	1372	Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1373	1373	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1374		-
1375		-
1376		-
1377		-
1378		-