Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 173.1 >
edited by Kilight Cao
on 2023/04/06 10:10
To version < 131.1 >
edited by Xiaoling
on 2022/07/06 16:08
>
Change comment: Uploaded new attachment "1657094930903-357.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -6,7 +6,6 @@
6 6  
7 7  **Table of Contents：**
8 8  
9 -{{toc/}}
10 10  
11 11  
12 12  
... ... @@ -13,11 +13,18 @@
13 13  
14 14  
15 15  
16 -= 1.  Introduction =
17 17  
16 +
17 +
18 +
19 +
20 +
21 +(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
22 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
26 +
21 21  (((
22 22  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
... ... @@ -38,7 +38,7 @@
38 38  
39 39  )))
40 40  
41 -[[image:image-20220826090251-1.png]]
47 +[[image:1656918270059-192.png]]
42 42  
43 43  
44 44  == 1.2  Specifications ==
... ... @@ -100,7 +100,6 @@
100 100  
101 101  == 1.3  Features ==
102 102  
103 -
104 104  * Open Source OpenWrt system
105 105  * Managed by Web GUI, SSH via WAN or WiFi
106 106  * Remote access with Reverse-SSH or remote.it
... ... @@ -118,13 +118,11 @@
118 118  
119 119  == 1.4  Hardware System Structure ==
120 120  
126 +[[image:1657079015096-949.png]]
121 121  
122 -[[image:image-20220830153228-1.png]]
123 123  
124 -
125 125  == 1.5  LPS8N Applications ==
126 126  
127 -
128 128  [[image:1657079055940-721.png]]
129 129  
130 130  
... ... @@ -134,7 +134,7 @@
134 134  LPS8N has totally four LEDs, They are:
135 135  
136 136  * **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
137 -* **Wireless LED** [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20220705165446-6.png?width=15&height=15&rev=1.1||alt="image-20220705165446-6.png" height="15" width="15"]]: No function yet.
140 +* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
138 138  * **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
139 139  ** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
140 140  ** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
... ... @@ -143,25 +143,10 @@
143 143  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
144 144  
145 145  
146 -== 1.7 Button Instruction ==
147 147  
148 148  
149 -LPS8N has a black toggle button, which is:
150 -
151 -
152 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
153 -
154 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
155 -
156 -
157 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
158 -
159 - **LED status: ** When the user releases the button, the LED will TURN OFF.
160 -
161 -
162 162  = 2.  Access and Configure LPS8N =
163 163  
164 -
165 165  (((
166 166  The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
167 167  )))
... ... @@ -171,13 +171,11 @@
171 171  
172 172  === 2.1.1  Connect via WiFi ===
173 173  
174 -
175 175  [[image:1657085974260-168.png]]
176 176  
177 177  
178 178  At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
179 179  
180 -
181 181  [[image:1652413127647-377.png]]
182 182  
183 183  
... ... @@ -184,24 +184,24 @@
184 184  (((
185 185  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
186 186  
173 +
187 187  
188 188  )))
189 189  
190 190  === 2.1.2  Connect via Ethernet with DHCP IP from router ===
191 191  
192 -
193 193  [[image:1657086105922-299.png]]
194 194  
195 195  
196 196  (((
197 -Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
183 +Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
198 198  
185 +
199 199  
200 200  )))
201 201  
202 202  === 2.1.3  Connect via WiFi with DHCP IP from router ===
203 203  
204 -
205 205  [[image:1657086192720-649.png]]
206 206  
207 207  
... ... @@ -208,15 +208,15 @@
208 208  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
209 209  
210 210  
197 +
211 211  === 2.1.4  Connect via Ethernet with fall back ip ===
212 212  
213 -
214 214  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
215 215  
216 216  
203 +
217 217  == 2.2  Access Configure Web UI ==
218 218  
219 -
220 220  **Web Interface**
221 221  
222 222  Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
... ... @@ -239,11 +239,11 @@
239 239  [[image:1652414287022-223.png]]
240 240  
241 241  
228 +
242 242  = 3.  Typical Network Setup =
243 243  
244 244  == 3.1  Overview ==
245 245  
246 -
247 247  The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
248 248  
249 249  * **WAN Port Internet Mode**
... ... @@ -253,7 +253,6 @@
253 253  
254 254  == 3.2  Use WAN port to access Internet ==
255 255  
256 -
257 257  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
258 258  
259 259  
... ... @@ -262,13 +262,11 @@
262 262  
263 263  == 3.3  Access the Internet as a WiFi Client ==
264 264  
250 +In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
265 265  
266 -In the WiFi Client Mode, LPS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
267 -
268 268  (((
269 269  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
270 270  
271 -
272 272  [[image:1657088818095-182.png]]
273 273  )))
274 274  
... ... @@ -281,7 +281,6 @@
281 281  
282 282  == 3.4  Use built-in 4G modem for internet access ==
283 283  
284 -
285 285  (((
286 286  (((
287 287  If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
... ... @@ -310,8 +310,6 @@
310 310  
311 311  (((
312 312  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
313 -
314 -
315 315  )))
316 316  
317 317  (((
... ... @@ -321,7 +321,6 @@
321 321  
322 322  == 3.5  Check Internet connection ==
323 323  
324 -
325 325  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
326 326  
327 327  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
... ... @@ -331,60 +331,47 @@
331 331  [[image:1657091099235-452.png]]
332 332  
333 333  
313 +
334 334  = 4.  Example: Configure as a LoRaWAN gateway =
335 335  
336 -
337 337  LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
338 338  
339 -
340 340  (((
341 -[[image:image-20220826090251-1.png]]
319 +[[image:1657091257648-882.png]]
342 342  )))
343 343  
344 344  (((
345 -This chapter describes how to use the LPS8N to work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
323 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
346 346  )))
347 347  
348 348  
327 +
349 349  == 4.1  Create a gateway in TTN V3 Server ==
350 350  
330 +(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
351 351  
352 -(% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
353 -
354 -
355 355  (((
356 356  Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
357 -
358 -
359 359  )))
360 360  
361 361  (((
362 362  [[image:1657091583941-544.png]]
363 -
364 -
365 365  )))
366 366  
367 367  The example gateway id is: (% style="color:green" %)**a840411e96744154**
368 368  
369 369  
343 +(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
370 370  
371 -(% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
372 -
373 -
374 374  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
375 375  
376 -
377 377  [[image:1657091739530-531.png]]
378 378  
379 379  
350 +(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
380 380  
381 -(% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
382 -
383 -
384 384  (((
385 385  [[image:1657091719947-297.png]]
386 -
387 -
388 388  )))
389 389  
390 390  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -395,8 +395,8 @@
395 395  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
396 396  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
397 397  
398 -(% style="color:blue" %)**Step 4: Create a Gateway**
399 399  
365 +(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
400 400  
401 401  [[image:1657091941182-367.png]]
402 402  
... ... @@ -413,9 +413,7 @@
413 413  
414 414  
415 415  (((
416 -(% style="color:red" %)**Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.**
417 -
418 -
382 +(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
419 419  )))
420 420  
421 421  After creating the gateway, you can see the gateway info, as below.
... ... @@ -423,9 +423,8 @@
423 423  [[image:1657094130908-567.png]](% style="display:none" %)
424 424  
425 425  
426 -== 4.2  Configure LPS8N to connect to TTN v3 ==
390 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
427 427  
428 -
429 429  (((
430 430  You can now configure the LPS8N to let it connect to TTN network V3.
431 431  )))
... ... @@ -435,24 +435,19 @@
435 435  )))
436 436  
437 437  (((
438 -Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply.**
439 -
440 -
401 +Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
441 441  )))
442 442  
443 443  [[image:1657094183213-301.png]]
444 444  
406 +(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
445 445  
446 -(% style="color:red" %)**Note: The server address must match the Gateway server address you choose in TTN V3.**
447 447  
448 -
449 449  In the home page, we can see the LoRaWAN connection is ready now.
450 450  
451 -
452 452  [[image:1657094202420-798.png]]
453 453  
454 454  
455 -
456 456  In TTN v3 portal, we can also see the gateway is connected.
457 457  
458 458  [[image:1657094221515-510.png]]
... ... @@ -460,14 +460,11 @@
460 460  
461 461  == 4.3  Configure frequency ==
462 462  
463 -
464 464  We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
465 465  
466 -
467 467  [[image:1657094249818-468.png]]
468 468  
469 469  
470 -
471 471  In logread page, user can check the frequency actually used.
472 472  
473 473   [[image:1657094333704-207.png]]
... ... @@ -475,7 +475,6 @@
475 475  
476 476  == 4.4  Add a LoRaWAN End Device ==
477 477  
478 -
479 479  (((
480 480  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
481 481  )))
... ... @@ -486,9 +486,8 @@
486 486  
487 487  [[image:1652422794767-871.png]]
488 488  
489 -
490 490  (((
491 -(% style="color:blue" %)**Step 1**: (%%)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
444 +(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
492 492  
493 493  
494 494  )))
... ... @@ -503,15 +503,12 @@
503 503  
504 504  (((
505 505  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
506 -
507 -
508 508  )))
509 509  
510 510  [[image:1657094382177-591.png]]
511 511  
512 -
513 513  (((
514 -(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
464 +(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
515 515  
516 516  
517 517  )))
... ... @@ -522,8 +522,6 @@
522 522  
523 523  (((
524 524  Select **Add Application** to open the screen below.
525 -
526 -
527 527  )))
528 528  
529 529  [[image:1657094417175-831.png]]
... ... @@ -564,114 +564,87 @@
564 564  )))
565 565  
566 566  (((
567 -(% style="color:blue" %)**Step 2**:  (%%)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
568 -
569 -
515 +(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
570 570  )))
571 571  
572 572  (((
573 -(% style="color:red" %)**Note that it may take some time for the device data to appear in the TTN v3 display.**
574 -
575 -
519 +(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
576 576  )))
577 577  
578 578  [[image:1657094791060-639.png]]
579 579  
580 580  
581 -= 5.  Web Configure Pages =
525 += 5. Web Configure Pages =
582 582  
583 -== 5.1  Home ==
527 +== 5.1 Home ==
584 584  
585 -
586 586  Shows the system running status.
587 587  
531 +[[image:1652423418568-752.png||height="329" width="724"]]
588 588  
589 -[[image:1657094893942-726.png]]
533 +== 5.2 LoRa Settings ==
590 590  
535 +=== 5.2.1 LoRa ~-~-> LoRa ===
591 591  
592 -== 5.2  LoRa Settings ==
593 -
594 -=== 5.2.1  LoRa ~-~-> LoRa ===
595 -
596 -
597 597  (((
598 598  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
599 599  )))
600 600  
601 601  (((
602 -Different LPS8N hardware version can support different frequency range:
542 +Different DLOS8N hardware version can support different frequency range:
603 603  )))
604 604  
605 -* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
606 -* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
545 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
546 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
607 607  
608 608  (((
609 -
610 -
611 -(((
612 -After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
613 -
614 -
549 +After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
615 615  )))
616 -)))
617 617  
618 -[[image:1657094930903-357.png]]
552 +[[image:1652423554776-574.png||height="380" width="740"]]
619 619  
620 -(% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
554 +Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
621 621  
622 622  
623 -=== 5.2.2  LoRa ~-~-> ABP Decryption ===
557 +=== 5.2.2 LoRa ~-~-> ABP Decryption ===
624 624  
559 +The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
625 625  
626 -The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
627 -
628 628  * No internet connection.
629 629  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
630 630  
631 631  (((
632 632  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
633 -
634 -
635 635  )))
636 636  
637 -[[image:1657095412271-942.png]]
568 +[[image:1652423628833-467.png||height="357" width="755"]]
638 638  
570 +== 5.3 LoRaWAN Settings ==
639 639  
640 -== 5.3  LoRaWAN Settings ==
572 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
641 641  
642 -=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
574 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
643 643  
644 -
645 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
646 -
647 -
648 648  [[image:1652423628833-467.png||height="357" width="755"]]
649 649  
650 -
651 651  (% style="color:red" %)**Note:**
652 652  
653 -~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
580 +~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
654 654  
655 655  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
656 656  
657 657  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
658 658  
586 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
659 659  
660 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
661 -
662 -
663 663  [[image:1652428499323-384.png||height="275" width="723"]]
664 664  
665 -
666 666  (((
667 667  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
668 -
669 -
670 670  )))
671 671  
672 -=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
594 +=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
673 673  
674 -
675 675  (((
676 676  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
677 677  )))
... ... @@ -678,51 +678,37 @@
678 678  
679 679  (((
680 680  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
681 -
682 -
683 683  )))
684 684  
685 685  [[image:1652428648903-878.png||height="266" width="731"]]
686 686  
606 +== 5.4 MQTT Settings ==
687 687  
688 -== 5.4  MQTT Settings ==
608 +If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
689 689  
690 -
691 -(((
692 -If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
693 -)))
694 -
695 -(((
696 696  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
697 -)))
698 698  
699 699  
700 700  [[image:1652428705046-212.png||height="417" width="733"]]
701 701  
615 +== 5.5 System ==
702 702  
703 -== 5.5  System ==
617 +=== 5.5.1 System ~-~-> System Overview ===
704 704  
705 -=== 5.5.1  System ~-~-> System Overview ===
706 -
707 -
708 708  Shows the system info:
709 709  
621 +[[image:1652428773760-580.png||height="408" width="728"]]
710 710  
711 -[[image:image-20220826091810-6.png]]
623 +=== 5.5.2 System ~-~-> General ( login settings) ===
712 712  
625 +[[image:1652428861256-300.png||height="354" width="724"]]
713 713  
714 -=== 5.5.2  System ~-~-> General ( login settings) ===
715 -
716 -
717 -[[image:1657155183982-792.png]]
718 -
719 -
720 720  (((
721 -(% style="color:#037691" %)**__System Password:__**
628 +**__System Password:__**
722 722  )))
723 723  
724 724  (((
725 -There are two login for LPS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
632 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
726 726  )))
727 727  
728 728  (((
... ... @@ -730,110 +730,83 @@
730 730  )))
731 731  
732 732  (((
733 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
640 +**__Timezone:__**Set device timezone.
734 734  )))
735 735  
736 736  (((
737 -(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
738 -
739 -
644 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
740 740  )))
741 741  
742 -=== 5.5.3  System ~-~-> Network ===
647 +=== 5.5.3 System ~-~-> Network ===
743 743  
649 +[[image:1652429149053-824.png||height="467" width="725"]]
744 744  
745 -[[image:1657155288223-566.png]]
746 -
747 -
748 748  (((
749 -(% style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
652 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
750 750  )))
751 751  
752 752  (((
753 -(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
656 +__**WAN Settings:**__Setting for DLOS8N WAN port
754 754  )))
755 755  
756 756  (((
757 -(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
660 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
758 758  
759 759  
760 760  )))
761 761  
762 -=== 5.5.4  System ~-~-> WiFi ===
665 +=== 5.5.4 System ~-~-> WiFi ===
763 763  
667 +DLOS8N WiFi Settings.
764 764  
765 -LPS8N WiFi Settings.
669 +[[image:1652429430767-921.png||height="367" width="723"]]
766 766  
671 +=== 5.5.5 System ~-~-> Cellular ===
767 767  
768 -[[image:1657155457089-430.png]]
769 -
770 -
771 -=== 5.5.5  System ~-~-> Cellular ===
772 -
773 -
774 774  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
775 775  
675 +[[image:1652429309615-825.png||height="320" width="732"]]
776 776  
777 -[[image:1657155507672-204.png]]
677 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
778 778  
679 +=== 5.5.6 System ~-~-> Network Status ===
779 779  
780 -(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
681 +[[image:1652429486609-208.png||height="415" width="728"]]
781 781  
683 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
782 782  
783 -=== 5.5.6  System ~-~-> Network Status ===
784 -
785 -
786 -[[image:1657155554265-721.png]]
787 -
788 -
789 -=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
790 -
791 -
792 792  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
793 793  
687 +[[image:1652429518191-846.png||height="332" width="733"]]
794 794  
795 -[[image:image-20220707112053-4.png||height="451" width="995"]]
689 +[[image:1652429527544-247.png||height="327" width="724"]]
796 796  
797 -[[image:image-20220707112053-5.png||height="453" width="1004"]]
691 +[[image:1652429537849-154.png||height="339" width="722"]]
798 798  
799 -(% style="display:none" %)
693 +Please see this document for detail:
800 800  
801 -(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
802 -
803 -(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
804 -
805 -[[image:image-20220826091725-5.png||height="479" width="1004"]]
806 -
807 -
808 808  (((
809 -Please see this document for detail:  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
696 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
810 810  )))
811 811  
812 -(% style="display:none" %) (%%)
813 813  
814 -(((
815 -R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]
700 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
816 816  
817 -
818 -)))
819 -
820 820  [[image:1652429624400-864.png||height="432" width="716"]]
821 821  
822 822  
823 -=== 5.5.8  System ~-~-> Firmware Upgrade ===
705 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
824 824  
707 +We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
825 825  
826 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
827 -
828 828  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
829 829  
830 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
711 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
831 831  
832 832  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
833 833  
834 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
715 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
835 835  
836 -
837 837  (((
838 838  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
839 839  )))
... ... @@ -840,33 +840,18 @@
840 840  
841 841  (((
842 842  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
843 -
844 -
845 845  )))
846 846  
847 -[[image:1657156052651-770.png]]
725 +[[image:1652429711145-862.png||height="270" width="737"]]
848 848  
727 +Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
849 849  
850 -(((
851 -Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update**(%%) to upgrade.
852 -)))
729 +(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
853 853  
854 -
855 -(((
856 -(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
857 -
858 -
859 -)))
860 -
861 -(((
862 862  The system will automatically boot into the new firmware after upgrade.
863 863  
864 -
865 -)))
733 +[[image:1652429962190-224.png||height="358" width="729"]]
866 866  
867 -[[image:1657156094153-520.png]]
868 -
869 -
870 870  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
871 871  
872 872  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -873,13 +873,10 @@
873 873  
874 874  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
875 875  
876 -
877 877  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
878 878  
743 +=== 5.5.9 System ~-~-> Reboot/Reset ===
879 879  
880 -=== 5.5.9  System ~-~-> Reboot/Reset ===
881 -
882 -
883 883  [[image:1652430197132-330.png||height="256" width="724"]]
884 884  
885 885  (((
... ... @@ -886,146 +886,57 @@
886 886  
887 887  )))
888 888  
889 -=== 5.5.10  System ~-~-> Package Maintain ===
751 +=== 5.5.10 System ~-~-> Package Maintain ===
890 890  
753 +[[image:1652430243826-126.png||height="289" width="723"]]
891 891  
892 -[[image:1657156199070-491.png]]
893 -
894 -
895 895  Place to show what package has installed and possible to upgrade packages.
896 896  
757 +== 5.6 LogRead ==
897 897  
898 -== 5.6  LogRead ==
759 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
899 899  
900 -=== 5.6.1  LogRead ~-~-> LoRa Log ===
901 901  
902 -
903 903  Show the frequency for LoRa Radio and traffics.
904 904  
764 +[[image:image-20220615204306-1.png||height="575" width="733"]]
905 905  
906 -[[image:1657156300781-933.png]]
907 907  
767 +Show the IoT Server Connection State and FWD State
908 908  
909 -=== 5.6.2  LogRead ~-~-> System Log ===
769 +[[image:image-20220616083933-1.png||height="556" width="729"]]
910 910  
771 +DLOS8 can view GPS location in the Logread FWD State
911 911  
912 -Show the system log
913 913  
774 +Show the Error logs, RxTxJson lorawan packages, and PULL State
914 914  
915 -[[image:1657156341198-226.png]]
776 +[[image:image-20220615205416-6.png||height="442" width="884"]]
916 916  
917 917  
918 -= 6.  More features =
779 +=== 5.6.2 LogRead ~-~-> System Log ===
919 919  
920 -== 6.1 Packet Filtering ==
781 +Show the system log
921 921  
783 +[[image:1652430369760-511.png||height="373" width="730"]]
922 922  
923 -(((
924 -Drop unwanted packets.
925 -)))
785 += 6. More features =
926 926  
927 -(((
928 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
929 -)))
787 +== 6.1 More instructions ==
930 930  
931 -
932 -== 6.2 Remote Access ==
933 -
934 -
935 -(((
936 -Remote Access Devices for management.
937 -)))
938 -
939 -(((
940 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
941 -)))
942 -
943 -
944 -== 6.3 How to decode ABP LoRaWAN node ==
945 -
946 -
947 -(((
948 -Decode ABP:
949 -)))
950 -
951 -(((
952 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
953 -)))
954 -
955 -
956 -== 6.4 How to set data to MQTT broker ==
957 -
958 -
959 -(((
960 -Only support ABP LoRaWAN End Node
961 -)))
962 -
963 -(((
964 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
965 -
966 -
967 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
968 -
969 -
970 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
971 -
972 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
973 -
974 -Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
975 -
976 -
977 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
978 -
979 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
980 -
981 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
982 -
983 -
984 -)))
985 -
986 -(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
987 -
988 -After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
989 -
990 -
991 -== 6.6  More instructions ==
992 -
993 -
994 994  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
995 995  
996 996  
997 -== 6.7  Auto-Provision ==
792 += 7. Linux System =
998 998  
794 +The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
999 999  
1000 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
796 +== 7.1 SSH Access for Linux console ==
1001 1001  
1002 -[[image:image-20220707092040-1.png||height="451" width="995"]]
798 +User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1003 1003  
1004 -[[image:image-20220707092040-2.png||height="452" width="1002"]]
800 +IP address:  IP address of DLOS8N
1005 1005  
1006 -[[image:image-20220826091546-4.png]](% style="display:none" %)
1007 -
1008 -
1009 -(((
1010 -Please see this document for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
1011 -)))
1012 -
1013 -(% style="display:none" %) (%%)
1014 -
1015 -= 7.  (% style="display:none" %) (%%)Linux System =
1016 -
1017 -
1018 -The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
1019 -
1020 -(% style="display:none" %) (%%)
1021 -
1022 -== 7.1  SSH Access for Linux console ==
1023 -
1024 -
1025 -User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1026 -
1027 -IP address:  IP address of LPS8N
1028 -
1029 1029  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
1030 1030  
1031 1031  User Name:      (% style="color:green" %)**root**
... ... @@ -1034,21 +1034,17 @@
1034 1034  
1035 1035  After logging in, you will be in the Linux console and can enter commands as shown below.
1036 1036  
810 +[[image:1652431588565-830.png]]
1037 1037  
1038 -[[image:1657158198733-338.png]]
812 +The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
1039 1039  
814 +[[image:1652431609193-637.png||height="214" width="732"]]
1040 1040  
1041 -The “** (% style="background-color:yellow" %)logread -f(%%)**(% style="background-color:yellow" %)” (%%)command can be used to debug how system runs.
1042 1042  
817 +== 7.2 Edit and Transfer files ==
1043 1043  
1044 -[[image:1657158190234-805.png]]
1045 -
1046 -
1047 -== 7.2  Edit and Transfer files ==
1048 -
1049 -
1050 1050  (((
1051 -The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
820 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
1052 1052  )))
1053 1053  
1054 1054  (((
... ... @@ -1056,7 +1056,7 @@
1056 1056  )))
1057 1057  
1058 1058  (((
1059 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LPS8N, or edit the files directly in the windows.
828 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
1060 1060  )))
1061 1061  
1062 1062  (((
... ... @@ -1066,15 +1066,14 @@
1066 1066  [[image:1652431650755-450.png]]
1067 1067  
1068 1068  
1069 -== 7.3  File System ==
838 +== 7.3 File System ==
1070 1070  
1071 -
1072 1072  (((
1073 -The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
841 +The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
1074 1074  )))
1075 1075  
1076 1076  (((
1077 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the LPS8N flash.
845 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
1078 1078  )))
1079 1079  
1080 1080  (((
... ... @@ -1082,11 +1082,10 @@
1082 1082  )))
1083 1083  
1084 1084  
1085 -== 7.4  Package maintenance system ==
853 +== 7.4 Package maintenance system ==
1086 1086  
855 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1087 1087  
1088 -LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
1089 -
1090 1090  (((
1091 1091  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
1092 1092  )))
... ... @@ -1096,11 +1096,11 @@
1096 1096  )))
1097 1097  
1098 1098  (((
1099 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**             (% style="color:black" %)~/~/ to get the latest packages list
866 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
1100 1100  )))
1101 1101  
1102 1102  (((
1103 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
870 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1104 1104  )))
1105 1105  
1106 1106  (((
... ... @@ -1136,117 +1136,48 @@
1136 1136  
1137 1137  (((
1138 1138  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1139 -
1140 -
1141 1141  )))
1142 1142  
1143 -= 8.  Upgrade Linux Firmware =
908 += 8. Upgrade Linux Firmware =
1144 1144  
1145 1145  
1146 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
911 += 9. FAQ =
1147 1147  
1148 -* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
913 +== 9.1 How can I configure for a customized frequency band? ==
1149 1149  
1150 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
1151 -
1152 -* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
1153 -
1154 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
1155 -
1156 -
1157 1157  (((
1158 -The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
916 +See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1159 1159  )))
1160 1160  
1161 -
1162 -== 8.1 Upgrade via Web UI ==
1163 -
1164 -
1165 1165  (((
1166 -Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1167 -)))
1168 -
1169 -(((
1170 -Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
1171 -)))
1172 -
1173 -
1174 -(((
1175 -(% style="color:red" %)**NOTE**(%%): You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)//**Preserve Settings**//(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1176 -)))
1177 -
1178 -
1179 -(((
1180 -The system will automatically boot into the new firmware after upgrade.
1181 -
1182 1182  
1183 1183  )))
1184 1184  
1185 -[[image:1657158986600-386.png]]
923 +== 9.2 Can I connect DLOS8N to LORIOT? ==
1186 1186  
925 +Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1187 1187  
1188 -== 8.2 Upgrade via Linux console ==
1189 1189  
928 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1190 1190  
1191 1191  (((
1192 -SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
931 +Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1193 1193  )))
1194 1194  
1195 1195  (((
1196 -(% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1197 -)))
1198 -
1199 -
1200 -(((
1201 -(% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1202 -)))
1203 -
1204 -
1205 -= 9.  OTA System Update =
1206 -
1207 -
1208 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1209 -
1210 -
1211 -= 10.  FAQ =
1212 -
1213 -== 10.1  How can I configure for a customized frequency band? ==
1214 -
1215 -
1216 -(((
1217 -See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1218 -)))
1219 -
1220 -(((
1221 -
1222 -)))
1223 -
1224 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1225 -
1226 -
1227 -(((
1228 -Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
1229 -)))
1230 -
1231 -(((
1232 1232  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1233 1233  )))
1234 1234  
1235 -(((
1236 -
1237 -)))
1238 1238  
1239 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
939 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1240 1240  
1241 -
1242 1242  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1243 1243  
1244 1244  
1245 -= 11.  Trouble Shooting =
944 += 10. Trouble Shooting =
1246 1246  
1247 -== 11.1  I get kernel error when install new package, how to fix? ==
946 +== 10.1 I get kernel error when install new package, how to fix? ==
1248 1248  
1249 -
1250 1250  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1251 1251  
1252 1252  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1268,11 +1268,10 @@
1268 1268  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1269 1269  
1270 1270  
1271 -== 11.2  How to recover the LPS8N if the firmware crashes ==
969 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1272 1272  
1273 -
1274 1274  (((
1275 -Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
972 +Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1276 1276  )))
1277 1277  
1278 1278  (((
... ... @@ -1279,78 +1279,60 @@
1279 1279  
1280 1280  )))
1281 1281  
1282 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
979 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1283 1283  
981 +[[image:1652435238615-272.png||height="247" width="727"]]
1284 1284  
1285 -[[image:1657159323292-776.png]]
1286 -
1287 -
1288 1288  (((
1289 -The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
984 +The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1290 1290  )))
1291 1291  
1292 -(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
987 +(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1293 1293  
1294 1294  
1295 -**Steps to connect via fall back IP:**
990 +Steps to connect via fall back IP:
1296 1296  
1297 -~1. Connect PC's Ethernet port to LG01's WAN port
992 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1298 1298  
1299 -2. Configure PC's Ethernet port has
994 +2. Configure PC’s Ethernet port has
1300 1300   IP: 172.31.255.253 and
1301 1301   Netmask: 255.255.255.252
1302 1302  
1303 -
1304 1304  As below photo:
1305 1305  
1306 1306  [[image:1652435256286-879.png]]
1307 1307  
1002 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1308 1308  
1309 -3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1310 -
1311 1311  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1312 1312  
1313 1313  
1314 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1007 += 11. Order Info =
1315 1315  
1009 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1316 1316  
1317 -(((
1318 -This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1319 -)))
1011 +(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1320 1320  
1321 -(((
1322 -In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1323 -)))
1013 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1014 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1324 1324  
1016 +(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1325 1325  
1326 -= 12.  Order Info =
1018 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1019 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1020 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1021 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1327 1327  
1328 -
1329 -**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1330 -
1331 -(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1332 -
1333 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1334 -* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1335 -
1336 -(% style="color:blue" %) **//YYY~://**(%%)**// 4G Cellular Option//**
1337 -
1338 -* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1339 -* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1340 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1341 -* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1342 -
1343 1343  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1344 1344  
1345 1345  
1346 -= 13.  Packing Info =
1026 += 12. Packing Info =
1347 1347  
1348 -
1349 1349  (((
1350 1350  **Package Includes**:
1351 1351  )))
1352 1352  
1353 -* LPS8N LoRaWAN Gateway x 1
1032 +* DLOS8N LoRaWAN Gateway x 1
1354 1354  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1355 1355  * Packaging with environmental protection paper box
1356 1356  
... ... @@ -1363,16 +1363,9 @@
1363 1363  * Package Size: 14.5 x 13.5 x 6 cm
1364 1364  * Weight: 300g
1365 1365  
1045 += 13. Support =
1366 1366  
1367 -= 14.  Support =
1368 -
1369 -
1370 1370  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1371 1371  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1372 1372  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1373 1373  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1374 -
1375 -
1376 -
1377 -
1378 -
1657095412271-942.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1657158986600-386.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657159323292-776.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.5 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20220707112053-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.4 KB
Content
image-20220707112053-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.1 KB
Content
image-20220826090251-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -146.0 KB
Content
image-20220826090430-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826090449-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826091546-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091725-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091810-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0