Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 172.1 >
edited by Kilight Cao
on 2023/03/31 14:52
To version < 160.3 >
edited by Xiaoling
on 2022/08/23 11:04
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -15,9 +15,11 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
22 +
21 21  (((
22 22  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
... ... @@ -38,9 +38,10 @@
38 38  
39 39  )))
40 40  
41 -[[image:image-20220826090251-1.png]]
43 +[[image:1656918270059-192.png]]
42 42  
43 43  
46 +
44 44  == 1.2  Specifications ==
45 45  
46 46  
... ... @@ -97,6 +97,8 @@
97 97  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
98 98  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
99 99  
103 +
104 +
100 100  == 1.3  Features ==
101 101  
102 102  
... ... @@ -114,12 +114,15 @@
114 114  * Support LoRaWAN basic station.
115 115  * Optional 3G/4G cellular connection
116 116  
122 +
123 +
117 117  == 1.4  Hardware System Structure ==
118 118  
119 119  
120 -[[image:image-20220830153228-1.png]]
127 +[[image:1657079015096-949.png]]
121 121  
122 122  
130 +
123 123  == 1.5  LPS8N Applications ==
124 124  
125 125  
... ... @@ -126,6 +126,7 @@
126 126  [[image:1657079055940-721.png]]
127 127  
128 128  
137 +
129 129  == 1.6  LED Indicators ==
130 130  
131 131  
... ... @@ -140,22 +140,8 @@
140 140  
141 141  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
142 142  
143 -== 1.7 Button Instruction ==
144 144  
145 145  
146 -LPS8N has a black toggle button, which is:
147 -
148 -
149 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
150 -
151 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
152 -
153 -
154 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
155 -
156 - **LED status: ** When the user releases the button, the LED will TURN OFF.
157 -
158 -
159 159  = 2.  Access and Configure LPS8N =
160 160  
161 161  
... ... @@ -164,8 +164,10 @@
164 164  )))
165 165  
166 166  
162 +
167 167  == 2.1  Find IP address of LPS8N ==
168 168  
165 +
169 169  === 2.1.1  Connect via WiFi ===
170 170  
171 171  
... ... @@ -181,6 +181,7 @@
181 181  (((
182 182  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
183 183  
181 +
184 184  
185 185  )))
186 186  
... ... @@ -193,6 +193,7 @@
193 193  (((
194 194  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
195 195  
194 +
196 196  
197 197  )))
198 198  
... ... @@ -205,6 +205,7 @@
205 205  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
206 206  
207 207  
207 +
208 208  === 2.1.4  Connect via Ethernet with fall back ip ===
209 209  
210 210  
... ... @@ -211,6 +211,7 @@
211 211  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
212 212  
213 213  
214 +
214 214  == 2.2  Access Configure Web UI ==
215 215  
216 216  
... ... @@ -236,8 +236,10 @@
236 236  [[image:1652414287022-223.png]]
237 237  
238 238  
240 +
239 239  = 3.  Typical Network Setup =
240 240  
243 +
241 241  == 3.1  Overview ==
242 242  
243 243  
... ... @@ -247,6 +247,8 @@
247 247  * **WiFi Client Mode**
248 248  * **WiFi AP Mode**
249 249  
253 +
254 +
250 250  == 3.2  Use WAN port to access Internet ==
251 251  
252 252  
... ... @@ -256,6 +256,7 @@
256 256  [[image:1657088560833-398.png]]
257 257  
258 258  
264 +
259 259  == 3.3  Access the Internet as a WiFi Client ==
260 260  
261 261  
... ... @@ -272,6 +272,7 @@
272 272  (((
273 273  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
274 274  
281 +
275 275  
276 276  )))
277 277  
... ... @@ -315,6 +315,7 @@
315 315  )))
316 316  
317 317  
325 +
318 318  == 3.5  Check Internet connection ==
319 319  
320 320  
... ... @@ -327,6 +327,7 @@
327 327  [[image:1657091099235-452.png]]
328 328  
329 329  
338 +
330 330  = 4.  Example: Configure as a LoRaWAN gateway =
331 331  
332 332  
... ... @@ -334,7 +334,7 @@
334 334  
335 335  
336 336  (((
337 -[[image:image-20220826090251-1.png]]
346 +[[image:1657091257648-882.png]]
338 338  )))
339 339  
340 340  (((
... ... @@ -342,6 +342,7 @@
342 342  )))
343 343  
344 344  
354 +
345 345  == 4.1  Create a gateway in TTN V3 Server ==
346 346  
347 347  
... ... @@ -391,6 +391,8 @@
391 391  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
392 392  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
393 393  
404 +
405 +
394 394  (% style="color:blue" %)**Step 4: Create a Gateway**
395 395  
396 396  
... ... @@ -419,6 +419,7 @@
419 419  [[image:1657094130908-567.png]](% style="display:none" %)
420 420  
421 421  
434 +
422 422  == 4.2  Configure LPS8N to connect to TTN v3 ==
423 423  
424 424  
... ... @@ -454,6 +454,7 @@
454 454  [[image:1657094221515-510.png]]
455 455  
456 456  
470 +
457 457  == 4.3  Configure frequency ==
458 458  
459 459  
... ... @@ -469,6 +469,7 @@
469 469   [[image:1657094333704-207.png]]
470 470  
471 471  
486 +
472 472  == 4.4  Add a LoRaWAN End Device ==
473 473  
474 474  
... ... @@ -574,8 +574,10 @@
574 574  [[image:1657094791060-639.png]]
575 575  
576 576  
592 +
577 577  = 5.  Web Configure Pages =
578 578  
595 +
579 579  == 5.1  Home ==
580 580  
581 581  
... ... @@ -585,8 +585,10 @@
585 585  [[image:1657094893942-726.png]]
586 586  
587 587  
605 +
588 588  == 5.2  LoRa Settings ==
589 589  
608 +
590 590  === 5.2.1  LoRa ~-~-> LoRa ===
591 591  
592 592  
... ... @@ -616,6 +616,7 @@
616 616  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
617 617  
618 618  
638 +
619 619  === 5.2.2  LoRa ~-~-> ABP Decryption ===
620 620  
621 621  
... ... @@ -633,8 +633,10 @@
633 633  [[image:1657095412271-942.png]]
634 634  
635 635  
656 +
636 636  == 5.3  LoRaWAN Settings ==
637 637  
659 +
638 638  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
639 639  
640 640  
... ... @@ -653,6 +653,7 @@
653 653  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
654 654  
655 655  
678 +
656 656  === 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
657 657  
658 658  
... ... @@ -662,6 +662,7 @@
662 662  (((
663 663  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
664 664  
688 +
665 665  
666 666  )))
667 667  
... ... @@ -681,6 +681,7 @@
681 681  [[image:1652428648903-878.png||height="266" width="731"]]
682 682  
683 683  
708 +
684 684  == 5.4  MQTT Settings ==
685 685  
686 686  
... ... @@ -696,8 +696,10 @@
696 696  [[image:1652428705046-212.png||height="417" width="733"]]
697 697  
698 698  
724 +
699 699  == 5.5  System ==
700 700  
727 +
701 701  === 5.5.1  System ~-~-> System Overview ===
702 702  
703 703  
... ... @@ -704,9 +704,10 @@
704 704  Shows the system info:
705 705  
706 706  
707 -[[image:image-20220826091810-6.png]]
734 +[[image:1657155158184-134.png]]
708 708  
709 709  
737 +
710 710  === 5.5.2  System ~-~-> General ( login settings) ===
711 711  
712 712  
... ... @@ -732,6 +732,7 @@
732 732  (((
733 733  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
734 734  
763 +
735 735  
736 736  )))
737 737  
... ... @@ -752,6 +752,7 @@
752 752  (((
753 753  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
754 754  
784 +
755 755  
756 756  )))
757 757  
... ... @@ -764,6 +764,7 @@
764 764  [[image:1657155457089-430.png]]
765 765  
766 766  
797 +
767 767  === 5.5.5  System ~-~-> Cellular ===
768 768  
769 769  
... ... @@ -776,6 +776,7 @@
776 776  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
777 777  
778 778  
810 +
779 779  === 5.5.6  System ~-~-> Network Status ===
780 780  
781 781  
... ... @@ -782,6 +782,7 @@
782 782  [[image:1657155554265-721.png]]
783 783  
784 784  
817 +
785 785  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
786 786  
787 787  
... ... @@ -798,7 +798,7 @@
798 798  
799 799  (% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
800 800  
801 -[[image:image-20220826091725-5.png||height="479" width="1004"]]
834 +[[image:image-20220707092040-3.png||height="449" width="956"]]
802 802  
803 803  
804 804  (((
... ... @@ -816,6 +816,7 @@
816 816  [[image:1652429624400-864.png||height="432" width="716"]]
817 817  
818 818  
852 +
819 819  === 5.5.8  System ~-~-> Firmware Upgrade ===
820 820  
821 821  
... ... @@ -873,6 +873,7 @@
873 873  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
874 874  
875 875  
910 +
876 876  === 5.5.9  System ~-~-> Reboot/Reset ===
877 877  
878 878  
... ... @@ -880,6 +880,8 @@
880 880  
881 881  (((
882 882  
918 +
919 +
883 883  )))
884 884  
885 885  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -891,8 +891,10 @@
891 891  Place to show what package has installed and possible to upgrade packages.
892 892  
893 893  
931 +
894 894  == 5.6  LogRead ==
895 895  
934 +
896 896  === 5.6.1  LogRead ~-~-> LoRa Log ===
897 897  
898 898  
... ... @@ -902,6 +902,7 @@
902 902  [[image:1657156300781-933.png]]
903 903  
904 904  
944 +
905 905  === 5.6.2  LogRead ~-~-> System Log ===
906 906  
907 907  
... ... @@ -911,8 +911,10 @@
911 911  [[image:1657156341198-226.png]]
912 912  
913 913  
954 +
914 914  = 6.  More features =
915 915  
957 +
916 916  == 6.1 Packet Filtering ==
917 917  
918 918  
... ... @@ -925,6 +925,7 @@
925 925  )))
926 926  
927 927  
970 +
928 928  == 6.2 Remote Access ==
929 929  
930 930  
... ... @@ -937,6 +937,7 @@
937 937  )))
938 938  
939 939  
983 +
940 940  == 6.3 How to decode ABP LoRaWAN node ==
941 941  
942 942  
... ... @@ -949,6 +949,7 @@
949 949  )))
950 950  
951 951  
996 +
952 952  == 6.4 How to set data to MQTT broker ==
953 953  
954 954  
... ... @@ -958,39 +958,20 @@
958 958  
959 959  (((
960 960  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
961 -
962 -
963 -== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
964 -
965 -
966 -If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
967 -
968 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
969 -
970 -Chirpstack v3 via gateway-bridge Instruction: [[https:~~/~~/www.chirpstack.io/gateway-bridge/gateway/dragino/>>https://www.chirpstack.io/gateway-bridge/gateway/dragino/]]
971 -
972 -
973 -If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
974 -
975 -[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
976 -
977 -Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
978 -
979 -
980 980  )))
981 981  
982 -(% style="color:red" %)**Note**(%%): After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
983 983  
984 984  
985 -== 6.6  More instructions ==
1010 +== 6.5  More instructions ==
986 986  
987 987  
988 988  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
989 989  
990 990  
991 -== 6.7  Auto-Provision ==
992 992  
1017 +== 6.6  Auto-Provision ==
993 993  
1019 +
994 994  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
995 995  
996 996  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -997,7 +997,7 @@
997 997  
998 998  [[image:image-20220707092040-2.png||height="452" width="1002"]]
999 999  
1000 -[[image:image-20220826091546-4.png]](% style="display:none" %)
1026 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
1001 1001  
1002 1002  
1003 1003  (((
... ... @@ -1006,6 +1006,7 @@
1006 1006  
1007 1007  (% style="display:none" %) (%%)
1008 1008  
1035 +
1009 1009  = 7.  (% style="display:none" %) (%%)Linux System =
1010 1010  
1011 1011  
... ... @@ -1013,6 +1013,7 @@
1013 1013  
1014 1014  (% style="display:none" %) (%%)
1015 1015  
1043 +
1016 1016  == 7.1  SSH Access for Linux console ==
1017 1017  
1018 1018  
... ... @@ -1038,6 +1038,7 @@
1038 1038  [[image:1657158190234-805.png]]
1039 1039  
1040 1040  
1069 +
1041 1041  == 7.2  Edit and Transfer files ==
1042 1042  
1043 1043  
... ... @@ -1060,6 +1060,7 @@
1060 1060  [[image:1652431650755-450.png]]
1061 1061  
1062 1062  
1092 +
1063 1063  == 7.3  File System ==
1064 1064  
1065 1065  
... ... @@ -1076,6 +1076,7 @@
1076 1076  )))
1077 1077  
1078 1078  
1109 +
1079 1079  == 7.4  Package maintenance system ==
1080 1080  
1081 1081  
... ... @@ -1131,6 +1131,7 @@
1131 1131  (((
1132 1132  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1133 1133  
1165 +
1134 1134  
1135 1135  )))
1136 1136  
... ... @@ -1153,6 +1153,7 @@
1153 1153  )))
1154 1154  
1155 1155  
1188 +
1156 1156  == 8.1 Upgrade via Web UI ==
1157 1157  
1158 1158  
... ... @@ -1179,6 +1179,7 @@
1179 1179  [[image:1657158986600-386.png]]
1180 1180  
1181 1181  
1215 +
1182 1182  == 8.2 Upgrade via Linux console ==
1183 1183  
1184 1184  
... ... @@ -1196,17 +1196,13 @@
1196 1196  )))
1197 1197  
1198 1198  
1199 -= 9.  OTA System Update =
1200 1200  
1234 += 9.  FAQ =
1201 1201  
1202 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1203 1203  
1237 +== 9.1  How can I configure for a customized frequency band? ==
1204 1204  
1205 -= 10.  FAQ =
1206 1206  
1207 -== 10.1  How can I configure for a customized frequency band? ==
1208 -
1209 -
1210 1210  (((
1211 1211  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1212 1212  )))
... ... @@ -1213,9 +1213,11 @@
1213 1213  
1214 1214  (((
1215 1215  
1246 +
1247 +
1216 1216  )))
1217 1217  
1218 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1250 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1219 1219  
1220 1220  
1221 1221  (((
... ... @@ -1228,19 +1228,23 @@
1228 1228  
1229 1229  (((
1230 1230  
1263 +
1264 +
1231 1231  )))
1232 1232  
1233 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1267 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1234 1234  
1235 1235  
1236 1236  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1237 1237  
1238 1238  
1239 -= 11.  Trouble Shooting =
1240 1240  
1241 -== 11.1  I get kernel error when install new package, how to fix? ==
1274 += 10.  Trouble Shooting =
1242 1242  
1243 1243  
1277 +== 10.1  I get kernel error when install new package, how to fix? ==
1278 +
1279 +
1244 1244  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1245 1245  
1246 1246  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1262,9 +1262,10 @@
1262 1262  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1263 1263  
1264 1264  
1265 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1266 1266  
1302 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1267 1267  
1304 +
1268 1268  (((
1269 1269  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1270 1270  )))
... ... @@ -1271,9 +1271,11 @@
1271 1271  
1272 1272  (((
1273 1273  
1311 +
1312 +
1274 1274  )))
1275 1275  
1276 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1315 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1277 1277  
1278 1278  
1279 1279  [[image:1657159323292-776.png]]
... ... @@ -1305,9 +1305,10 @@
1305 1305  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1306 1306  
1307 1307  
1308 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1309 1309  
1348 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1310 1310  
1350 +
1311 1311  (((
1312 1312  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1313 1313  )))
... ... @@ -1317,11 +1317,13 @@
1317 1317  )))
1318 1318  
1319 1319  
1320 -= 12.  Order Info =
1321 1321  
1361 += 11.  Order Info =
1322 1322  
1363 +
1323 1323  **//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1324 1324  
1366 +
1325 1325  (% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1326 1326  
1327 1327  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -1337,14 +1337,15 @@
1337 1337  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1338 1338  
1339 1339  
1340 -= 13.  Packing Info =
1341 1341  
1383 += 12.  Packing Info =
1342 1342  
1385 +
1343 1343  (((
1344 1344  **Package Includes**:
1345 1345  )))
1346 1346  
1347 -* LPS8N LoRaWAN Gateway x 1
1390 +* DLOS8N LoRaWAN Gateway x 1
1348 1348  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1349 1349  * Packaging with environmental protection paper box
1350 1350  
... ... @@ -1357,9 +1357,11 @@
1357 1357  * Package Size: 14.5 x 13.5 x 6 cm
1358 1358  * Weight: 300g
1359 1359  
1360 -= 14.  Support =
1361 1361  
1362 1362  
1405 +
1406 += 13.  Support =
1407 +
1363 1363  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1364 1364  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1365 1365  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
... ... @@ -1366,8 +1366,4 @@
1366 1366  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1367 1367  
1368 1368  
1369 -
1370 -
1371 -
1372 -
1373 1373  
image-20220826090251-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -146.0 KB
Content
image-20220826090430-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826090449-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20220826091546-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091725-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.8 KB
Content
image-20220826091810-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0