Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 171.2 >
edited by Xiaoling
on 2022/12/28 16:36
To version < 167.3 >
edited by Xiaoling
on 2022/08/26 14:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -15,9 +15,11 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
22 +
21 21  (((
22 22  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
... ... @@ -32,6 +32,8 @@
32 32  
33 33  (((
34 34  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
37 +
38 +
35 35  )))
36 36  
37 37  (((
... ... @@ -41,6 +41,7 @@
41 41  [[image:image-20220826090251-1.png]]
42 42  
43 43  
48 +
44 44  == 1.2  Specifications ==
45 45  
46 46  
... ... @@ -99,6 +99,7 @@
99 99  
100 100  
101 101  
107 +
102 102  == 1.3  Features ==
103 103  
104 104  
... ... @@ -118,12 +118,14 @@
118 118  
119 119  
120 120  
127 +
121 121  == 1.4  Hardware System Structure ==
122 122  
123 123  
124 -[[image:image-20220830153228-1.png]]
131 +[[image:image-20220826094525-7.png]]
125 125  
126 126  
134 +
127 127  == 1.5  LPS8N Applications ==
128 128  
129 129  
... ... @@ -130,6 +130,7 @@
130 130  [[image:1657079055940-721.png]]
131 131  
132 132  
141 +
133 133  == 1.6  LED Indicators ==
134 134  
135 135  
... ... @@ -146,22 +146,7 @@
146 146  
147 147  
148 148  
149 -== 1.7 Button Instruction ==
150 150  
151 -
152 -LPS8N has a black toggle button, which is:
153 -
154 -
155 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
156 -
157 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
158 -
159 -
160 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
161 -
162 - **LED status: ** When the user releases the button, the LED will TURN OFF.
163 -
164 -
165 165  = 2.  Access and Configure LPS8N =
166 166  
167 167  
... ... @@ -170,8 +170,10 @@
170 170  )))
171 171  
172 172  
167 +
173 173  == 2.1  Find IP address of LPS8N ==
174 174  
170 +
175 175  === 2.1.1  Connect via WiFi ===
176 176  
177 177  
... ... @@ -187,6 +187,7 @@
187 187  (((
188 188  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
189 189  
186 +
190 190  
191 191  )))
192 192  
... ... @@ -199,6 +199,7 @@
199 199  (((
200 200  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
201 201  
199 +
202 202  
203 203  )))
204 204  
... ... @@ -211,6 +211,7 @@
211 211  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
212 212  
213 213  
212 +
214 214  === 2.1.4  Connect via Ethernet with fall back ip ===
215 215  
216 216  
... ... @@ -217,6 +217,7 @@
217 217  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
218 218  
219 219  
219 +
220 220  == 2.2  Access Configure Web UI ==
221 221  
222 222  
... ... @@ -242,8 +242,10 @@
242 242  [[image:1652414287022-223.png]]
243 243  
244 244  
245 +
245 245  = 3.  Typical Network Setup =
246 246  
248 +
247 247  == 3.1  Overview ==
248 248  
249 249  
... ... @@ -254,7 +254,6 @@
254 254  * **WiFi AP Mode**
255 255  
256 256  
257 -
258 258  == 3.2  Use WAN port to access Internet ==
259 259  
260 260  
... ... @@ -264,6 +264,7 @@
264 264  [[image:1657088560833-398.png]]
265 265  
266 266  
268 +
267 267  == 3.3  Access the Internet as a WiFi Client ==
268 268  
269 269  
... ... @@ -280,6 +280,7 @@
280 280  (((
281 281  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
282 282  
285 +
283 283  
284 284  )))
285 285  
... ... @@ -323,6 +323,7 @@
323 323  )))
324 324  
325 325  
329 +
326 326  == 3.5  Check Internet connection ==
327 327  
328 328  
... ... @@ -335,6 +335,7 @@
335 335  [[image:1657091099235-452.png]]
336 336  
337 337  
342 +
338 338  = 4.  Example: Configure as a LoRaWAN gateway =
339 339  
340 340  
... ... @@ -350,6 +350,7 @@
350 350  )))
351 351  
352 352  
358 +
353 353  == 4.1  Create a gateway in TTN V3 Server ==
354 354  
355 355  
... ... @@ -399,6 +399,7 @@
399 399  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
400 400  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
401 401  
408 +
402 402  (% style="color:blue" %)**Step 4: Create a Gateway**
403 403  
404 404  
... ... @@ -427,6 +427,7 @@
427 427  [[image:1657094130908-567.png]](% style="display:none" %)
428 428  
429 429  
437 +
430 430  == 4.2  Configure LPS8N to connect to TTN v3 ==
431 431  
432 432  
... ... @@ -462,6 +462,7 @@
462 462  [[image:1657094221515-510.png]]
463 463  
464 464  
473 +
465 465  == 4.3  Configure frequency ==
466 466  
467 467  
... ... @@ -477,6 +477,7 @@
477 477   [[image:1657094333704-207.png]]
478 478  
479 479  
489 +
480 480  == 4.4  Add a LoRaWAN End Device ==
481 481  
482 482  
... ... @@ -582,8 +582,10 @@
582 582  [[image:1657094791060-639.png]]
583 583  
584 584  
595 +
585 585  = 5.  Web Configure Pages =
586 586  
598 +
587 587  == 5.1  Home ==
588 588  
589 589  
... ... @@ -593,8 +593,10 @@
593 593  [[image:1657094893942-726.png]]
594 594  
595 595  
608 +
596 596  == 5.2  LoRa Settings ==
597 597  
611 +
598 598  === 5.2.1  LoRa ~-~-> LoRa ===
599 599  
600 600  
... ... @@ -624,6 +624,7 @@
624 624  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
625 625  
626 626  
641 +
627 627  === 5.2.2  LoRa ~-~-> ABP Decryption ===
628 628  
629 629  
... ... @@ -641,8 +641,10 @@
641 641  [[image:1657095412271-942.png]]
642 642  
643 643  
659 +
644 644  == 5.3  LoRaWAN Settings ==
645 645  
662 +
646 646  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
647 647  
648 648  
... ... @@ -661,6 +661,7 @@
661 661  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
662 662  
663 663  
681 +
664 664  === 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
665 665  
666 666  
... ... @@ -670,6 +670,7 @@
670 670  (((
671 671  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
672 672  
691 +
673 673  
674 674  )))
675 675  
... ... @@ -689,6 +689,7 @@
689 689  [[image:1652428648903-878.png||height="266" width="731"]]
690 690  
691 691  
711 +
692 692  == 5.4  MQTT Settings ==
693 693  
694 694  
... ... @@ -704,8 +704,10 @@
704 704  [[image:1652428705046-212.png||height="417" width="733"]]
705 705  
706 706  
727 +
707 707  == 5.5  System ==
708 708  
730 +
709 709  === 5.5.1  System ~-~-> System Overview ===
710 710  
711 711  
... ... @@ -715,6 +715,7 @@
715 715  [[image:image-20220826091810-6.png]]
716 716  
717 717  
740 +
718 718  === 5.5.2  System ~-~-> General ( login settings) ===
719 719  
720 720  
... ... @@ -740,6 +740,7 @@
740 740  (((
741 741  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
742 742  
766 +
743 743  
744 744  )))
745 745  
... ... @@ -760,6 +760,7 @@
760 760  (((
761 761  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
762 762  
787 +
763 763  
764 764  )))
765 765  
... ... @@ -772,6 +772,7 @@
772 772  [[image:1657155457089-430.png]]
773 773  
774 774  
800 +
775 775  === 5.5.5  System ~-~-> Cellular ===
776 776  
777 777  
... ... @@ -784,6 +784,7 @@
784 784  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
785 785  
786 786  
813 +
787 787  === 5.5.6  System ~-~-> Network Status ===
788 788  
789 789  
... ... @@ -790,6 +790,7 @@
790 790  [[image:1657155554265-721.png]]
791 791  
792 792  
820 +
793 793  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
794 794  
795 795  
... ... @@ -824,6 +824,7 @@
824 824  [[image:1652429624400-864.png||height="432" width="716"]]
825 825  
826 826  
855 +
827 827  === 5.5.8  System ~-~-> Firmware Upgrade ===
828 828  
829 829  
... ... @@ -881,6 +881,7 @@
881 881  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
882 882  
883 883  
913 +
884 884  === 5.5.9  System ~-~-> Reboot/Reset ===
885 885  
886 886  
... ... @@ -888,6 +888,8 @@
888 888  
889 889  (((
890 890  
921 +
922 +
891 891  )))
892 892  
893 893  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -899,8 +899,10 @@
899 899  Place to show what package has installed and possible to upgrade packages.
900 900  
901 901  
934 +
902 902  == 5.6  LogRead ==
903 903  
937 +
904 904  === 5.6.1  LogRead ~-~-> LoRa Log ===
905 905  
906 906  
... ... @@ -910,6 +910,7 @@
910 910  [[image:1657156300781-933.png]]
911 911  
912 912  
947 +
913 913  === 5.6.2  LogRead ~-~-> System Log ===
914 914  
915 915  
... ... @@ -919,8 +919,10 @@
919 919  [[image:1657156341198-226.png]]
920 920  
921 921  
957 +
922 922  = 6.  More features =
923 923  
960 +
924 924  == 6.1 Packet Filtering ==
925 925  
926 926  
... ... @@ -933,6 +933,7 @@
933 933  )))
934 934  
935 935  
973 +
936 936  == 6.2 Remote Access ==
937 937  
938 938  
... ... @@ -945,6 +945,7 @@
945 945  )))
946 946  
947 947  
986 +
948 948  == 6.3 How to decode ABP LoRaWAN node ==
949 949  
950 950  
... ... @@ -957,6 +957,7 @@
957 957  )))
958 958  
959 959  
999 +
960 960  == 6.4 How to set data to MQTT broker ==
961 961  
962 962  
... ... @@ -969,6 +969,7 @@
969 969  )))
970 970  
971 971  
1012 +
972 972  == 6.5  More instructions ==
973 973  
974 974  
... ... @@ -975,6 +975,7 @@
975 975  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
976 976  
977 977  
1019 +
978 978  == 6.6  Auto-Provision ==
979 979  
980 980  
... ... @@ -993,6 +993,7 @@
993 993  
994 994  (% style="display:none" %) (%%)
995 995  
1038 +
996 996  = 7.  (% style="display:none" %) (%%)Linux System =
997 997  
998 998  
... ... @@ -1000,6 +1000,7 @@
1000 1000  
1001 1001  (% style="display:none" %) (%%)
1002 1002  
1046 +
1003 1003  == 7.1  SSH Access for Linux console ==
1004 1004  
1005 1005  
... ... @@ -1025,6 +1025,7 @@
1025 1025  [[image:1657158190234-805.png]]
1026 1026  
1027 1027  
1072 +
1028 1028  == 7.2  Edit and Transfer files ==
1029 1029  
1030 1030  
... ... @@ -1047,6 +1047,7 @@
1047 1047  [[image:1652431650755-450.png]]
1048 1048  
1049 1049  
1095 +
1050 1050  == 7.3  File System ==
1051 1051  
1052 1052  
... ... @@ -1063,6 +1063,7 @@
1063 1063  )))
1064 1064  
1065 1065  
1112 +
1066 1066  == 7.4  Package maintenance system ==
1067 1067  
1068 1068  
... ... @@ -1118,6 +1118,7 @@
1118 1118  (((
1119 1119  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1120 1120  
1168 +
1121 1121  
1122 1122  )))
1123 1123  
... ... @@ -1140,6 +1140,7 @@
1140 1140  )))
1141 1141  
1142 1142  
1191 +
1143 1143  == 8.1 Upgrade via Web UI ==
1144 1144  
1145 1145  
... ... @@ -1166,6 +1166,7 @@
1166 1166  [[image:1657158986600-386.png]]
1167 1167  
1168 1168  
1218 +
1169 1169  == 8.2 Upgrade via Linux console ==
1170 1170  
1171 1171  
... ... @@ -1183,17 +1183,13 @@
1183 1183  )))
1184 1184  
1185 1185  
1186 -= 9.  OTA System Update =
1187 1187  
1237 += 9.  FAQ =
1188 1188  
1189 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1190 1190  
1240 +== 9.1  How can I configure for a customized frequency band? ==
1191 1191  
1192 -= 10.  FAQ =
1193 1193  
1194 -== 10.1  How can I configure for a customized frequency band? ==
1195 -
1196 -
1197 1197  (((
1198 1198  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1199 1199  )))
... ... @@ -1200,9 +1200,11 @@
1200 1200  
1201 1201  (((
1202 1202  
1249 +
1250 +
1203 1203  )))
1204 1204  
1205 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1253 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1206 1206  
1207 1207  
1208 1208  (((
... ... @@ -1215,19 +1215,23 @@
1215 1215  
1216 1216  (((
1217 1217  
1266 +
1267 +
1218 1218  )))
1219 1219  
1220 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1270 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1221 1221  
1222 1222  
1223 1223  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1224 1224  
1225 1225  
1226 -= 11.  Trouble Shooting =
1227 1227  
1228 -== 11.1  I get kernel error when install new package, how to fix? ==
1277 += 10.  Trouble Shooting =
1229 1229  
1230 1230  
1280 +== 10.1  I get kernel error when install new package, how to fix? ==
1281 +
1282 +
1231 1231  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1232 1232  
1233 1233  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1249,9 +1249,10 @@
1249 1249  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1250 1250  
1251 1251  
1252 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1253 1253  
1305 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1254 1254  
1307 +
1255 1255  (((
1256 1256  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1257 1257  )))
... ... @@ -1258,9 +1258,11 @@
1258 1258  
1259 1259  (((
1260 1260  
1314 +
1315 +
1261 1261  )))
1262 1262  
1263 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1318 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1264 1264  
1265 1265  
1266 1266  [[image:1657159323292-776.png]]
... ... @@ -1292,9 +1292,10 @@
1292 1292  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1293 1293  
1294 1294  
1295 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1296 1296  
1351 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1297 1297  
1353 +
1298 1298  (((
1299 1299  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1300 1300  )))
... ... @@ -1304,11 +1304,13 @@
1304 1304  )))
1305 1305  
1306 1306  
1307 -= 12.  Order Info =
1308 1308  
1364 += 11.  Order Info =
1309 1309  
1366 +
1310 1310  **//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1311 1311  
1369 +
1312 1312  (% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1313 1313  
1314 1314  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -1324,9 +1324,10 @@
1324 1324  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1325 1325  
1326 1326  
1327 -= 13.  Packing Info =
1328 1328  
1386 += 12.  Packing Info =
1329 1329  
1388 +
1330 1330  (((
1331 1331  **Package Includes**:
1332 1332  )))
... ... @@ -1346,19 +1346,12 @@
1346 1346  
1347 1347  
1348 1348  
1349 -= 14.  Support =
1350 1350  
1409 += 13.  Support =
1351 1351  
1411 +
1352 1352  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1353 1353  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1354 1354  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1355 1355  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1356 1356  
1357 -
1358 -
1359 -
1360 -
1361 -
1362 -
1363 -
1364 -
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0