Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 171.1 >
edited by Kilight Cao
on 2022/12/28 13:56
To version < 166.1 >
edited by Xiaoling
on 2022/08/26 09:18
>
Change comment: Uploaded new attachment "image-20220826091810-6.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoling
Content
... ... @@ -15,9 +15,11 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 +
18 18  == 1.1  What is the LPS8N ==
19 19  
20 20  
22 +
21 21  (((
22 22  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 23  )))
... ... @@ -41,6 +41,7 @@
41 41  [[image:image-20220826090251-1.png]]
42 42  
43 43  
46 +
44 44  == 1.2  Specifications ==
45 45  
46 46  
... ... @@ -97,6 +97,9 @@
97 97  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
98 98  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
99 99  
103 +
104 +
105 +
100 100  == 1.3  Features ==
101 101  
102 102  
... ... @@ -114,12 +114,16 @@
114 114  * Support LoRaWAN basic station.
115 115  * Optional 3G/4G cellular connection
116 116  
123 +
124 +
125 +
117 117  == 1.4  Hardware System Structure ==
118 118  
119 119  
120 -[[image:image-20220830153228-1.png]]
129 +[[image:image-20220826090449-3.png]]
121 121  
122 122  
132 +
123 123  == 1.5  LPS8N Applications ==
124 124  
125 125  
... ... @@ -126,6 +126,7 @@
126 126  [[image:1657079055940-721.png]]
127 127  
128 128  
139 +
129 129  == 1.6  LED Indicators ==
130 130  
131 131  
... ... @@ -140,22 +140,9 @@
140 140  
141 141  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
142 142  
143 -== 1.7 Button Instruction ==
144 144  
145 145  
146 -LPS8N has a black toggle button, which is:
147 147  
148 -
149 -(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
150 -
151 - **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
152 -
153 -
154 -(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
155 -
156 - **LED status: ** When the user releases the button, the LED will TURN OFF.
157 -
158 -
159 159  = 2.  Access and Configure LPS8N =
160 160  
161 161  
... ... @@ -164,8 +164,10 @@
164 164  )))
165 165  
166 166  
165 +
167 167  == 2.1  Find IP address of LPS8N ==
168 168  
168 +
169 169  === 2.1.1  Connect via WiFi ===
170 170  
171 171  
... ... @@ -181,6 +181,7 @@
181 181  (((
182 182  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
183 183  
184 +
184 184  
185 185  )))
186 186  
... ... @@ -193,6 +193,7 @@
193 193  (((
194 194  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
195 195  
197 +
196 196  
197 197  )))
198 198  
... ... @@ -205,6 +205,7 @@
205 205  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
206 206  
207 207  
210 +
208 208  === 2.1.4  Connect via Ethernet with fall back ip ===
209 209  
210 210  
... ... @@ -211,6 +211,7 @@
211 211  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
212 212  
213 213  
217 +
214 214  == 2.2  Access Configure Web UI ==
215 215  
216 216  
... ... @@ -236,8 +236,10 @@
236 236  [[image:1652414287022-223.png]]
237 237  
238 238  
243 +
239 239  = 3.  Typical Network Setup =
240 240  
246 +
241 241  == 3.1  Overview ==
242 242  
243 243  
... ... @@ -247,6 +247,7 @@
247 247  * **WiFi Client Mode**
248 248  * **WiFi AP Mode**
249 249  
256 +
250 250  == 3.2  Use WAN port to access Internet ==
251 251  
252 252  
... ... @@ -256,6 +256,7 @@
256 256  [[image:1657088560833-398.png]]
257 257  
258 258  
266 +
259 259  == 3.3  Access the Internet as a WiFi Client ==
260 260  
261 261  
... ... @@ -272,6 +272,7 @@
272 272  (((
273 273  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
274 274  
283 +
275 275  
276 276  )))
277 277  
... ... @@ -315,6 +315,7 @@
315 315  )))
316 316  
317 317  
327 +
318 318  == 3.5  Check Internet connection ==
319 319  
320 320  
... ... @@ -327,6 +327,7 @@
327 327  [[image:1657091099235-452.png]]
328 328  
329 329  
340 +
330 330  = 4.  Example: Configure as a LoRaWAN gateway =
331 331  
332 332  
... ... @@ -342,6 +342,7 @@
342 342  )))
343 343  
344 344  
356 +
345 345  == 4.1  Create a gateway in TTN V3 Server ==
346 346  
347 347  
... ... @@ -391,6 +391,7 @@
391 391  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
392 392  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
393 393  
406 +
394 394  (% style="color:blue" %)**Step 4: Create a Gateway**
395 395  
396 396  
... ... @@ -419,6 +419,7 @@
419 419  [[image:1657094130908-567.png]](% style="display:none" %)
420 420  
421 421  
435 +
422 422  == 4.2  Configure LPS8N to connect to TTN v3 ==
423 423  
424 424  
... ... @@ -454,6 +454,7 @@
454 454  [[image:1657094221515-510.png]]
455 455  
456 456  
471 +
457 457  == 4.3  Configure frequency ==
458 458  
459 459  
... ... @@ -469,6 +469,7 @@
469 469   [[image:1657094333704-207.png]]
470 470  
471 471  
487 +
472 472  == 4.4  Add a LoRaWAN End Device ==
473 473  
474 474  
... ... @@ -574,8 +574,10 @@
574 574  [[image:1657094791060-639.png]]
575 575  
576 576  
593 +
577 577  = 5.  Web Configure Pages =
578 578  
596 +
579 579  == 5.1  Home ==
580 580  
581 581  
... ... @@ -585,8 +585,10 @@
585 585  [[image:1657094893942-726.png]]
586 586  
587 587  
606 +
588 588  == 5.2  LoRa Settings ==
589 589  
609 +
590 590  === 5.2.1  LoRa ~-~-> LoRa ===
591 591  
592 592  
... ... @@ -616,6 +616,7 @@
616 616  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
617 617  
618 618  
639 +
619 619  === 5.2.2  LoRa ~-~-> ABP Decryption ===
620 620  
621 621  
... ... @@ -633,8 +633,10 @@
633 633  [[image:1657095412271-942.png]]
634 634  
635 635  
657 +
636 636  == 5.3  LoRaWAN Settings ==
637 637  
660 +
638 638  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
639 639  
640 640  
... ... @@ -653,6 +653,7 @@
653 653  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
654 654  
655 655  
679 +
656 656  === 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
657 657  
658 658  
... ... @@ -662,6 +662,7 @@
662 662  (((
663 663  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
664 664  
689 +
665 665  
666 666  )))
667 667  
... ... @@ -681,6 +681,7 @@
681 681  [[image:1652428648903-878.png||height="266" width="731"]]
682 682  
683 683  
709 +
684 684  == 5.4  MQTT Settings ==
685 685  
686 686  
... ... @@ -696,8 +696,10 @@
696 696  [[image:1652428705046-212.png||height="417" width="733"]]
697 697  
698 698  
725 +
699 699  == 5.5  System ==
700 700  
728 +
701 701  === 5.5.1  System ~-~-> System Overview ===
702 702  
703 703  
... ... @@ -704,9 +704,10 @@
704 704  Shows the system info:
705 705  
706 706  
707 -[[image:image-20220826091810-6.png]]
735 +[[image:1657155158184-134.png]]
708 708  
709 709  
738 +
710 710  === 5.5.2  System ~-~-> General ( login settings) ===
711 711  
712 712  
... ... @@ -732,6 +732,7 @@
732 732  (((
733 733  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
734 734  
764 +
735 735  
736 736  )))
737 737  
... ... @@ -752,6 +752,7 @@
752 752  (((
753 753  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
754 754  
785 +
755 755  
756 756  )))
757 757  
... ... @@ -764,6 +764,7 @@
764 764  [[image:1657155457089-430.png]]
765 765  
766 766  
798 +
767 767  === 5.5.5  System ~-~-> Cellular ===
768 768  
769 769  
... ... @@ -776,6 +776,7 @@
776 776  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
777 777  
778 778  
811 +
779 779  === 5.5.6  System ~-~-> Network Status ===
780 780  
781 781  
... ... @@ -782,6 +782,7 @@
782 782  [[image:1657155554265-721.png]]
783 783  
784 784  
818 +
785 785  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
786 786  
787 787  
... ... @@ -816,6 +816,7 @@
816 816  [[image:1652429624400-864.png||height="432" width="716"]]
817 817  
818 818  
853 +
819 819  === 5.5.8  System ~-~-> Firmware Upgrade ===
820 820  
821 821  
... ... @@ -873,6 +873,7 @@
873 873  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
874 874  
875 875  
911 +
876 876  === 5.5.9  System ~-~-> Reboot/Reset ===
877 877  
878 878  
... ... @@ -880,6 +880,8 @@
880 880  
881 881  (((
882 882  
919 +
920 +
883 883  )))
884 884  
885 885  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -891,8 +891,10 @@
891 891  Place to show what package has installed and possible to upgrade packages.
892 892  
893 893  
932 +
894 894  == 5.6  LogRead ==
895 895  
935 +
896 896  === 5.6.1  LogRead ~-~-> LoRa Log ===
897 897  
898 898  
... ... @@ -902,6 +902,7 @@
902 902  [[image:1657156300781-933.png]]
903 903  
904 904  
945 +
905 905  === 5.6.2  LogRead ~-~-> System Log ===
906 906  
907 907  
... ... @@ -911,8 +911,10 @@
911 911  [[image:1657156341198-226.png]]
912 912  
913 913  
955 +
914 914  = 6.  More features =
915 915  
958 +
916 916  == 6.1 Packet Filtering ==
917 917  
918 918  
... ... @@ -925,6 +925,7 @@
925 925  )))
926 926  
927 927  
971 +
928 928  == 6.2 Remote Access ==
929 929  
930 930  
... ... @@ -937,6 +937,7 @@
937 937  )))
938 938  
939 939  
984 +
940 940  == 6.3 How to decode ABP LoRaWAN node ==
941 941  
942 942  
... ... @@ -949,6 +949,7 @@
949 949  )))
950 950  
951 951  
997 +
952 952  == 6.4 How to set data to MQTT broker ==
953 953  
954 954  
... ... @@ -961,6 +961,7 @@
961 961  )))
962 962  
963 963  
1010 +
964 964  == 6.5  More instructions ==
965 965  
966 966  
... ... @@ -967,6 +967,7 @@
967 967  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
968 968  
969 969  
1017 +
970 970  == 6.6  Auto-Provision ==
971 971  
972 972  
... ... @@ -985,6 +985,7 @@
985 985  
986 986  (% style="display:none" %) (%%)
987 987  
1036 +
988 988  = 7.  (% style="display:none" %) (%%)Linux System =
989 989  
990 990  
... ... @@ -992,6 +992,7 @@
992 992  
993 993  (% style="display:none" %) (%%)
994 994  
1044 +
995 995  == 7.1  SSH Access for Linux console ==
996 996  
997 997  
... ... @@ -1017,6 +1017,7 @@
1017 1017  [[image:1657158190234-805.png]]
1018 1018  
1019 1019  
1070 +
1020 1020  == 7.2  Edit and Transfer files ==
1021 1021  
1022 1022  
... ... @@ -1039,6 +1039,7 @@
1039 1039  [[image:1652431650755-450.png]]
1040 1040  
1041 1041  
1093 +
1042 1042  == 7.3  File System ==
1043 1043  
1044 1044  
... ... @@ -1055,6 +1055,7 @@
1055 1055  )))
1056 1056  
1057 1057  
1110 +
1058 1058  == 7.4  Package maintenance system ==
1059 1059  
1060 1060  
... ... @@ -1110,6 +1110,7 @@
1110 1110  (((
1111 1111  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1112 1112  
1166 +
1113 1113  
1114 1114  )))
1115 1115  
... ... @@ -1132,6 +1132,7 @@
1132 1132  )))
1133 1133  
1134 1134  
1189 +
1135 1135  == 8.1 Upgrade via Web UI ==
1136 1136  
1137 1137  
... ... @@ -1158,6 +1158,7 @@
1158 1158  [[image:1657158986600-386.png]]
1159 1159  
1160 1160  
1216 +
1161 1161  == 8.2 Upgrade via Linux console ==
1162 1162  
1163 1163  
... ... @@ -1175,17 +1175,13 @@
1175 1175  )))
1176 1176  
1177 1177  
1178 -= 9.  OTA System Update =
1179 1179  
1235 += 9.  FAQ =
1180 1180  
1181 -LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1182 1182  
1238 +== 9.1  How can I configure for a customized frequency band? ==
1183 1183  
1184 -= 10.  FAQ =
1185 1185  
1186 -== 10.1  How can I configure for a customized frequency band? ==
1187 -
1188 -
1189 1189  (((
1190 1190  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1191 1191  )))
... ... @@ -1192,9 +1192,11 @@
1192 1192  
1193 1193  (((
1194 1194  
1247 +
1248 +
1195 1195  )))
1196 1196  
1197 -== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1251 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1198 1198  
1199 1199  
1200 1200  (((
... ... @@ -1207,19 +1207,23 @@
1207 1207  
1208 1208  (((
1209 1209  
1264 +
1265 +
1210 1210  )))
1211 1211  
1212 -== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1268 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1213 1213  
1214 1214  
1215 1215  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1216 1216  
1217 1217  
1218 -= 11.  Trouble Shooting =
1219 1219  
1220 -== 11.1  I get kernel error when install new package, how to fix? ==
1275 += 10.  Trouble Shooting =
1221 1221  
1222 1222  
1278 +== 10.1  I get kernel error when install new package, how to fix? ==
1279 +
1280 +
1223 1223  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1224 1224  
1225 1225  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1241,9 +1241,10 @@
1241 1241  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1242 1242  
1243 1243  
1244 -== 11.2  How to recover the LPS8N if the firmware crashes ==
1245 1245  
1303 +== 10.2  How to recover the LPS8N if the firmware crashes ==
1246 1246  
1305 +
1247 1247  (((
1248 1248  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1249 1249  )))
... ... @@ -1250,9 +1250,11 @@
1250 1250  
1251 1251  (((
1252 1252  
1312 +
1313 +
1253 1253  )))
1254 1254  
1255 -== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1316 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1256 1256  
1257 1257  
1258 1258  [[image:1657159323292-776.png]]
... ... @@ -1284,9 +1284,10 @@
1284 1284  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1285 1285  
1286 1286  
1287 -== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1288 1288  
1349 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1289 1289  
1351 +
1290 1290  (((
1291 1291  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1292 1292  )))
... ... @@ -1296,11 +1296,13 @@
1296 1296  )))
1297 1297  
1298 1298  
1299 -= 12.  Order Info =
1300 1300  
1362 += 11.  Order Info =
1301 1301  
1364 +
1302 1302  **//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1303 1303  
1367 +
1304 1304  (% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1305 1305  
1306 1306  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -1316,9 +1316,10 @@
1316 1316  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1317 1317  
1318 1318  
1319 -= 13.  Packing Info =
1320 1320  
1384 += 12.  Packing Info =
1321 1321  
1386 +
1322 1322  (((
1323 1323  **Package Includes**:
1324 1324  )))
... ... @@ -1336,10 +1336,13 @@
1336 1336  * Package Size: 14.5 x 13.5 x 6 cm
1337 1337  * Weight: 300g
1338 1338  
1339 -= 14.  Support =
1340 1340  
1341 1341  
1406 += 13.  Support =
1407 +
1408 +
1342 1342  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1343 1343  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1344 1344  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1345 1345  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1413 +
image-20220826094525-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0