Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 169.1 >
edited by Kilight Cao
on 2022/12/15 14:02
To version < 177.1 >
edited by Kilight Cao
on 2023/04/26 15:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -15,11 +15,9 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -
19 19  == 1.1  What is the LPS8N ==
20 20  
21 21  
22 -
23 23  (((
24 24  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
25 25  )))
... ... @@ -34,8 +34,6 @@
34 34  
35 35  (((
36 36  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
37 -
38 -
39 39  )))
40 40  
41 41  (((
... ... @@ -45,7 +45,6 @@
45 45  [[image:image-20220826090251-1.png]]
46 46  
47 47  
48 -
49 49  == 1.2  Specifications ==
50 50  
51 51  
... ... @@ -125,7 +125,6 @@
125 125  [[image:image-20220830153228-1.png]]
126 126  
127 127  
128 -
129 129  == 1.5  LPS8N Applications ==
130 130  
131 131  
... ... @@ -132,7 +132,6 @@
132 132  [[image:1657079055940-721.png]]
133 133  
134 134  
135 -
136 136  == 1.6  LED Indicators ==
137 137  
138 138  
... ... @@ -147,7 +147,6 @@
147 147  
148 148  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
149 149  
150 -
151 151  == 1.7 Button Instruction ==
152 152  
153 153  
... ... @@ -172,10 +172,8 @@
172 172  )))
173 173  
174 174  
175 -
176 176  == 2.1  Find IP address of LPS8N ==
177 177  
178 -
179 179  === 2.1.1  Connect via WiFi ===
180 180  
181 181  
... ... @@ -191,7 +191,6 @@
191 191  (((
192 192  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
193 193  
194 -
195 195  
196 196  )))
197 197  
... ... @@ -204,7 +204,6 @@
204 204  (((
205 205  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
206 206  
207 -
208 208  
209 209  )))
210 210  
... ... @@ -217,7 +217,6 @@
217 217  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
218 218  
219 219  
220 -
221 221  === 2.1.4  Connect via Ethernet with fall back ip ===
222 222  
223 223  
... ... @@ -224,7 +224,6 @@
224 224  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
225 225  
226 226  
227 -
228 228  == 2.2  Access Configure Web UI ==
229 229  
230 230  
... ... @@ -250,10 +250,8 @@
250 250  [[image:1652414287022-223.png]]
251 251  
252 252  
253 -
254 254  = 3.  Typical Network Setup =
255 255  
256 -
257 257  == 3.1  Overview ==
258 258  
259 259  
... ... @@ -272,7 +272,6 @@
272 272  [[image:1657088560833-398.png]]
273 273  
274 274  
275 -
276 276  == 3.3  Access the Internet as a WiFi Client ==
277 277  
278 278  
... ... @@ -289,7 +289,6 @@
289 289  (((
290 290  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
291 291  
292 -
293 293  
294 294  )))
295 295  
... ... @@ -333,7 +333,6 @@
333 333  )))
334 334  
335 335  
336 -
337 337  == 3.5  Check Internet connection ==
338 338  
339 339  
... ... @@ -346,7 +346,6 @@
346 346  [[image:1657091099235-452.png]]
347 347  
348 348  
349 -
350 350  = 4.  Example: Configure as a LoRaWAN gateway =
351 351  
352 352  
... ... @@ -362,7 +362,6 @@
362 362  )))
363 363  
364 364  
365 -
366 366  == 4.1  Create a gateway in TTN V3 Server ==
367 367  
368 368  
... ... @@ -440,7 +440,6 @@
440 440  [[image:1657094130908-567.png]](% style="display:none" %)
441 441  
442 442  
443 -
444 444  == 4.2  Configure LPS8N to connect to TTN v3 ==
445 445  
446 446  
... ... @@ -476,7 +476,6 @@
476 476  [[image:1657094221515-510.png]]
477 477  
478 478  
479 -
480 480  == 4.3  Configure frequency ==
481 481  
482 482  
... ... @@ -492,7 +492,6 @@
492 492   [[image:1657094333704-207.png]]
493 493  
494 494  
495 -
496 496  == 4.4  Add a LoRaWAN End Device ==
497 497  
498 498  
... ... @@ -598,10 +598,8 @@
598 598  [[image:1657094791060-639.png]]
599 599  
600 600  
601 -
602 602  = 5.  Web Configure Pages =
603 603  
604 -
605 605  == 5.1  Home ==
606 606  
607 607  
... ... @@ -611,10 +611,8 @@
611 611  [[image:1657094893942-726.png]]
612 612  
613 613  
614 -
615 615  == 5.2  LoRa Settings ==
616 616  
617 -
618 618  === 5.2.1  LoRa ~-~-> LoRa ===
619 619  
620 620  
... ... @@ -644,7 +644,6 @@
644 644  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
645 645  
646 646  
647 -
648 648  === 5.2.2  LoRa ~-~-> ABP Decryption ===
649 649  
650 650  
... ... @@ -662,10 +662,8 @@
662 662  [[image:1657095412271-942.png]]
663 663  
664 664  
665 -
666 666  == 5.3  LoRaWAN Settings ==
667 667  
668 -
669 669  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
670 670  
671 671  
... ... @@ -684,18 +684,29 @@
684 684  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
685 685  
686 686  
656 +=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
687 687  
688 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
689 689  
659 +[[image:image-20230406172421-1.png]]
690 690  
691 -[[image:1652428499323-384.png||height="275" width="723"]]
692 692  
693 -
694 694  (((
695 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
663 +Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
696 696  
697 697  
698 -
666 +The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
667 +
668 +Instruction:
669 +
670 + [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
671 +
672 + [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
673 +
674 + [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
675 +
676 + ThingPark
677 +
678 + [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
699 699  )))
700 700  
701 701  === 5.3.3  LoRaWAN ~-~-> LORIOT ===
... ... @@ -714,7 +714,6 @@
714 714  [[image:1652428648903-878.png||height="266" width="731"]]
715 715  
716 716  
717 -
718 718  == 5.4  MQTT Settings ==
719 719  
720 720  
... ... @@ -730,10 +730,8 @@
730 730  [[image:1652428705046-212.png||height="417" width="733"]]
731 731  
732 732  
733 -
734 734  == 5.5  System ==
735 735  
736 -
737 737  === 5.5.1  System ~-~-> System Overview ===
738 738  
739 739  
... ... @@ -743,7 +743,6 @@
743 743  [[image:image-20220826091810-6.png]]
744 744  
745 745  
746 -
747 747  === 5.5.2  System ~-~-> General ( login settings) ===
748 748  
749 749  
... ... @@ -769,7 +769,6 @@
769 769  (((
770 770  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
771 771  
772 -
773 773  
774 774  )))
775 775  
... ... @@ -790,7 +790,6 @@
790 790  (((
791 791  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
792 792  
793 -
794 794  
795 795  )))
796 796  
... ... @@ -803,7 +803,6 @@
803 803  [[image:1657155457089-430.png]]
804 804  
805 805  
806 -
807 807  === 5.5.5  System ~-~-> Cellular ===
808 808  
809 809  
... ... @@ -816,7 +816,6 @@
816 816  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
817 817  
818 818  
819 -
820 820  === 5.5.6  System ~-~-> Network Status ===
821 821  
822 822  
... ... @@ -823,7 +823,6 @@
823 823  [[image:1657155554265-721.png]]
824 824  
825 825  
826 -
827 827  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
828 828  
829 829  
... ... @@ -858,7 +858,6 @@
858 858  [[image:1652429624400-864.png||height="432" width="716"]]
859 859  
860 860  
861 -
862 862  === 5.5.8  System ~-~-> Firmware Upgrade ===
863 863  
864 864  
... ... @@ -916,7 +916,6 @@
916 916  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
917 917  
918 918  
919 -
920 920  === 5.5.9  System ~-~-> Reboot/Reset ===
921 921  
922 922  
... ... @@ -924,8 +924,6 @@
924 924  
925 925  (((
926 926  
927 -
928 -
929 929  )))
930 930  
931 931  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -937,10 +937,8 @@
937 937  Place to show what package has installed and possible to upgrade packages.
938 938  
939 939  
940 -
941 941  == 5.6  LogRead ==
942 942  
943 -
944 944  === 5.6.1  LogRead ~-~-> LoRa Log ===
945 945  
946 946  
... ... @@ -950,7 +950,6 @@
950 950  [[image:1657156300781-933.png]]
951 951  
952 952  
953 -
954 954  === 5.6.2  LogRead ~-~-> System Log ===
955 955  
956 956  
... ... @@ -960,10 +960,8 @@
960 960  [[image:1657156341198-226.png]]
961 961  
962 962  
963 -
964 964  = 6.  More features =
965 965  
966 -
967 967  == 6.1 Packet Filtering ==
968 968  
969 969  
... ... @@ -976,7 +976,6 @@
976 976  )))
977 977  
978 978  
979 -
980 980  == 6.2 Remote Access ==
981 981  
982 982  
... ... @@ -989,7 +989,6 @@
989 989  )))
990 990  
991 991  
992 -
993 993  == 6.3 How to decode ABP LoRaWAN node ==
994 994  
995 995  
... ... @@ -1002,7 +1002,6 @@
1002 1002  )))
1003 1003  
1004 1004  
1005 -
1006 1006  == 6.4 How to set data to MQTT broker ==
1007 1007  
1008 1008  
... ... @@ -1012,20 +1012,78 @@
1012 1012  
1013 1013  (((
1014 1014  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
974 +
975 +
976 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
977 +
978 +
979 +If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
980 +
981 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
982 +
983 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
984 +
985 +
986 +If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
987 +
988 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
989 +
990 +Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
991 +
992 +
1015 1015  )))
1016 1016  
995 +(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
1017 1017  
997 +After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1018 1018  
1019 -== 6.5  More instructions ==
1020 1020  
1000 +== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1021 1021  
1022 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1023 1023  
1003 +USB card reader plugged into the USB port of the gateway
1024 1024  
1025 1025  
1026 -== 6.6  Auto-Provision ==
1006 +Access the gateway Linux Command Line
1027 1027  
1028 1028  
1009 +Check the USB device
1010 +
1011 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1012 +
1013 +
1014 +**Mount the USB device**
1015 +
1016 +(% class="box infomessage" %)
1017 +(((
1018 +**mount /dev/sda1 /mnt/**
1019 +)))
1020 +
1021 +(% class="wikigeneratedid" %)
1022 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1023 +
1024 +
1025 +(% class="wikigeneratedid" %)
1026 +**Set up the automatic mount on boot**
1027 +
1028 +(% class="box infomessage" %)
1029 +(((
1030 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1031 +)))
1032 +
1033 +(% class="wikigeneratedid" %)
1034 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1035 +
1036 +
1037 +== 6.7  More instructions ==
1038 +
1039 +
1040 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1041 +
1042 +
1043 +== 6.8  Auto-Provision ==
1044 +
1045 +
1029 1029  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1030 1030  
1031 1031  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -1041,7 +1041,6 @@
1041 1041  
1042 1042  (% style="display:none" %) (%%)
1043 1043  
1044 -
1045 1045  = 7.  (% style="display:none" %) (%%)Linux System =
1046 1046  
1047 1047  
... ... @@ -1049,7 +1049,6 @@
1049 1049  
1050 1050  (% style="display:none" %) (%%)
1051 1051  
1052 -
1053 1053  == 7.1  SSH Access for Linux console ==
1054 1054  
1055 1055  
... ... @@ -1075,7 +1075,6 @@
1075 1075  [[image:1657158190234-805.png]]
1076 1076  
1077 1077  
1078 -
1079 1079  == 7.2  Edit and Transfer files ==
1080 1080  
1081 1081  
... ... @@ -1098,7 +1098,6 @@
1098 1098  [[image:1652431650755-450.png]]
1099 1099  
1100 1100  
1101 -
1102 1102  == 7.3  File System ==
1103 1103  
1104 1104  
... ... @@ -1115,7 +1115,6 @@
1115 1115  )))
1116 1116  
1117 1117  
1118 -
1119 1119  == 7.4  Package maintenance system ==
1120 1120  
1121 1121  
... ... @@ -1171,7 +1171,6 @@
1171 1171  (((
1172 1172  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1173 1173  
1174 -
1175 1175  
1176 1176  )))
1177 1177  
... ... @@ -1194,7 +1194,6 @@
1194 1194  )))
1195 1195  
1196 1196  
1197 -
1198 1198  == 8.1 Upgrade via Web UI ==
1199 1199  
1200 1200  
... ... @@ -1221,7 +1221,6 @@
1221 1221  [[image:1657158986600-386.png]]
1222 1222  
1223 1223  
1224 -
1225 1225  == 8.2 Upgrade via Linux console ==
1226 1226  
1227 1227  
... ... @@ -1239,13 +1239,17 @@
1239 1239  )))
1240 1240  
1241 1241  
1251 += 9.  OTA System Update =
1242 1242  
1243 -= 9.  FAQ =
1244 1244  
1254 +LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1245 1245  
1246 -== 9.1  How can I configure for a customized frequency band? ==
1247 1247  
1257 += 10.  FAQ =
1248 1248  
1259 +== 10.1  How can I configure for a customized frequency band? ==
1260 +
1261 +
1249 1249  (((
1250 1250  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1251 1251  )))
... ... @@ -1252,11 +1252,9 @@
1252 1252  
1253 1253  (((
1254 1254  
1255 -
1256 -
1257 1257  )))
1258 1258  
1259 -== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1270 +== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1260 1260  
1261 1261  
1262 1262  (((
... ... @@ -1269,23 +1269,19 @@
1269 1269  
1270 1270  (((
1271 1271  
1272 -
1273 -
1274 1274  )))
1275 1275  
1276 -== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1285 +== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1277 1277  
1278 1278  
1279 1279  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1280 1280  
1281 1281  
1291 += 11.  Trouble Shooting =
1282 1282  
1283 -= 10.  Trouble Shooting =
1293 +== 11.1  I get kernel error when install new package, how to fix? ==
1284 1284  
1285 1285  
1286 -== 10.1  I get kernel error when install new package, how to fix? ==
1287 -
1288 -
1289 1289  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1290 1290  
1291 1291  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1307,10 +1307,9 @@
1307 1307  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1308 1308  
1309 1309  
1317 +== 11.2  How to recover the LPS8N if the firmware crashes ==
1310 1310  
1311 -== 10.2  How to recover the LPS8N if the firmware crashes ==
1312 1312  
1313 -
1314 1314  (((
1315 1315  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1316 1316  )))
... ... @@ -1317,11 +1317,9 @@
1317 1317  
1318 1318  (((
1319 1319  
1320 -
1321 -
1322 1322  )))
1323 1323  
1324 -== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1328 +== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1325 1325  
1326 1326  
1327 1327  [[image:1657159323292-776.png]]
... ... @@ -1353,10 +1353,9 @@
1353 1353  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1354 1354  
1355 1355  
1360 +== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1356 1356  
1357 -== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1358 1358  
1359 -
1360 1360  (((
1361 1361  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1362 1362  )))
... ... @@ -1366,13 +1366,11 @@
1366 1366  )))
1367 1367  
1368 1368  
1372 += 12.  Order Info =
1369 1369  
1370 -= 11.  Order Info =
1371 1371  
1372 -
1373 1373  **//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1374 1374  
1375 -
1376 1376  (% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1377 1377  
1378 1378  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
... ... @@ -1388,10 +1388,9 @@
1388 1388  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1389 1389  
1390 1390  
1392 += 13.  Packing Info =
1391 1391  
1392 -= 12.  Packing Info =
1393 1393  
1394 -
1395 1395  (((
1396 1396  **Package Includes**:
1397 1397  )))
... ... @@ -1409,7 +1409,7 @@
1409 1409  * Package Size: 14.5 x 13.5 x 6 cm
1410 1410  * Weight: 300g
1411 1411  
1412 -= 13.  Support =
1412 += 14.  Support =
1413 1413  
1414 1414  
1415 1415  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
... ... @@ -1416,3 +1416,5 @@
1416 1416  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1417 1417  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1418 1418  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1419 +
1420 +
image-20230406172421-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +85.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0