Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 165.1 >
edited by Xiaoling
on 2022/08/26 09:17
To version < 184.2 >
edited by Xiaoling
on 2024/03/18 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N - LoRaWAN Gateway User Manual
1 +LPS8N -- LoRaWAN Gateway User Manual
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents：**
7 +**Table of Contents:**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -15,21 +15,19 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -
19 19  == 1.1  What is the LPS8N ==
20 20  
21 21  
22 -
23 23  (((
24 -The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The LPS8N is an (% style="color:blue" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
25 25  )))
26 26  
27 27  (((
28 -The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
26 +The LPS8N uses (% style="color:blue" %)**Semtech packet forwarder**(%%) & (% style="color:blue" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
29 29  )))
30 30  
31 31  (((
32 -LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
30 +LPS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands** (%%)to use in their own LoRa network.
33 33  )))
34 34  
35 35  (((
... ... @@ -36,14 +36,10 @@
36 36  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
37 37  )))
38 38  
39 -(((
40 -
41 -)))
42 42  
43 -[[image:1656918270059-192.png]]
38 +[[image:image-20220826090251-1.png]]
44 44  
45 45  
46 -
47 47  == 1.2  Specifications ==
48 48  
49 49  
... ... @@ -85,7 +85,7 @@
85 85  * Up to -140 dBm sensitivity
86 86  * 70 dB CW interferer rejection at 1 MHz offset
87 87  * Able to operate with negative SNR, CCR up to 9dB
88 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
82 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
89 89  * Dual digital TX & RX radio front-end interfaces
90 90  * 10 programmable parallel demodulation paths
91 91  * Dynamic data-rate (DDR) adaptation
... ... @@ -100,8 +100,6 @@
100 100  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
101 101  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
102 102  
103 -
104 -
105 105  == 1.3  Features ==
106 106  
107 107  
... ... @@ -119,15 +119,12 @@
119 119  * Support LoRaWAN basic station.
120 120  * Optional 3G/4G cellular connection
121 121  
122 -
123 -
124 124  == 1.4  Hardware System Structure ==
125 125  
126 126  
127 -[[image:1657079015096-949.png]]
117 +[[image:image-20220830153228-1.png]]
128 128  
129 129  
130 -
131 131  == 1.5  LPS8N Applications ==
132 132  
133 133  
... ... @@ -134,7 +134,6 @@
134 134  [[image:1657079055940-721.png]]
135 135  
136 136  
137 -
138 138  == 1.6  LED Indicators ==
139 139  
140 140  
... ... @@ -149,8 +149,22 @@
149 149  
150 150  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
151 151  
140 +== 1.7 Button Instruction ==
152 152  
153 153  
143 +LPS8N has a black toggle button, which is:
144 +
145 +
146 +(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
147 +
148 + **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
149 +
150 +
151 +(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
152 +
153 + **LED status: ** When the user releases the button, the LED will TURN OFF.
154 +
155 +
154 154  = 2.  Access and Configure LPS8N =
155 155  
156 156  
... ... @@ -159,10 +159,8 @@
159 159  )))
160 160  
161 161  
162 -
163 163  == 2.1  Find IP address of LPS8N ==
164 164  
165 -
166 166  === 2.1.1  Connect via WiFi ===
167 167  
168 168  
... ... @@ -176,9 +176,8 @@
176 176  
177 177  
178 178  (((
179 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
179 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8N has the default IP (% style="color:green" %)10.130.1.1
180 180  
181 -
182 182  
183 183  )))
184 184  
... ... @@ -191,7 +191,6 @@
191 191  (((
192 192  Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
193 193  
194 -
195 195  
196 196  )))
197 197  
... ... @@ -204,14 +204,12 @@
204 204  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
205 205  
206 206  
207 -
208 208  === 2.1.4  Connect via Ethernet with fall back ip ===
209 209  
210 210  
211 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
208 +The WAN port also has a [[fall back ip address>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
212 212  
213 213  
214 -
215 215  == 2.2  Access Configure Web UI ==
216 216  
217 217  
... ... @@ -230,17 +230,15 @@
230 230  
231 231  The account details for Web Login are:
232 232  
233 -(% style="color:#4f81bd" %)**User Name: root**
229 +(% style="color:blue" %)**User Name: root**
234 234  
235 -(% style="color:#4f81bd" %)**Password:   dragino**
231 +(% style="color:blue" %)**Password:   dragino**
236 236  
237 237  [[image:1652414287022-223.png]]
238 238  
239 239  
240 -
241 241  = 3.  Typical Network Setup =
242 242  
243 -
244 244  == 3.1  Overview ==
245 245  
246 246  
... ... @@ -250,8 +250,6 @@
250 250  * **WiFi Client Mode**
251 251  * **WiFi AP Mode**
252 252  
253 -
254 -
255 255  == 3.2  Use WAN port to access Internet ==
256 256  
257 257  
... ... @@ -261,7 +261,6 @@
261 261  [[image:1657088560833-398.png]]
262 262  
263 263  
264 -
265 265  == 3.3  Access the Internet as a WiFi Client ==
266 266  
267 267  
... ... @@ -278,7 +278,6 @@
278 278  (((
279 279  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
280 280  
281 -
282 282  
283 283  )))
284 284  
... ... @@ -322,7 +322,6 @@
322 322  )))
323 323  
324 324  
325 -
326 326  == 3.5  Check Internet connection ==
327 327  
328 328  
... ... @@ -335,7 +335,6 @@
335 335  [[image:1657091099235-452.png]]
336 336  
337 337  
338 -
339 339  = 4.  Example: Configure as a LoRaWAN gateway =
340 340  
341 341  
... ... @@ -343,7 +343,7 @@
343 343  
344 344  
345 345  (((
346 -[[image:1657091257648-882.png]]
334 +[[image:image-20220826090251-1.png]]
347 347  )))
348 348  
349 349  (((
... ... @@ -351,7 +351,6 @@
351 351  )))
352 352  
353 353  
354 -
355 355  == 4.1  Create a gateway in TTN V3 Server ==
356 356  
357 357  
... ... @@ -401,8 +401,6 @@
401 401  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
402 402  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
403 403  
404 -
405 -
406 406  (% style="color:blue" %)**Step 4: Create a Gateway**
407 407  
408 408  
... ... @@ -431,7 +431,6 @@
431 431  [[image:1657094130908-567.png]](% style="display:none" %)
432 432  
433 433  
434 -
435 435  == 4.2  Configure LPS8N to connect to TTN v3 ==
436 436  
437 437  
... ... @@ -467,7 +467,6 @@
467 467  [[image:1657094221515-510.png]]
468 468  
469 469  
470 -
471 471  == 4.3  Configure frequency ==
472 472  
473 473  
... ... @@ -483,7 +483,6 @@
483 483   [[image:1657094333704-207.png]]
484 484  
485 485  
486 -
487 487  == 4.4  Add a LoRaWAN End Device ==
488 488  
489 489  
... ... @@ -589,10 +589,8 @@
589 589  [[image:1657094791060-639.png]]
590 590  
591 591  
592 -
593 593  = 5.  Web Configure Pages =
594 594  
595 -
596 596  == 5.1  Home ==
597 597  
598 598  
... ... @@ -602,10 +602,8 @@
602 602  [[image:1657094893942-726.png]]
603 603  
604 604  
605 -
606 606  == 5.2  LoRa Settings ==
607 607  
608 -
609 609  === 5.2.1  LoRa ~-~-> LoRa ===
610 610  
611 611  
... ... @@ -635,7 +635,6 @@
635 635  (% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
636 636  
637 637  
638 -
639 639  === 5.2.2  LoRa ~-~-> ABP Decryption ===
640 640  
641 641  
... ... @@ -653,10 +653,8 @@
653 653  [[image:1657095412271-942.png]]
654 654  
655 655  
656 -
657 657  == 5.3  LoRaWAN Settings ==
658 658  
659 -
660 660  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
661 661  
662 662  
... ... @@ -675,17 +675,31 @@
675 675  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
676 676  
677 677  
653 +=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
678 678  
679 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
680 680  
656 +[[image:image-20230406172421-1.png]]
681 681  
682 -[[image:1652428499323-384.png||height="275" width="723"]]
683 683  
684 -
685 685  (((
686 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
660 +Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
687 687  
688 688  
663 +The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
664 +
665 +Instruction:
666 +
667 + [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
668 +
669 + [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
670 +
671 + [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
672 +
673 + ThingPark
674 +
675 + [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
676 +
677 +
689 689  
690 690  )))
691 691  
... ... @@ -705,7 +705,6 @@
705 705  [[image:1652428648903-878.png||height="266" width="731"]]
706 706  
707 707  
708 -
709 709  == 5.4  MQTT Settings ==
710 710  
711 711  
... ... @@ -721,10 +721,8 @@
721 721  [[image:1652428705046-212.png||height="417" width="733"]]
722 722  
723 723  
724 -
725 725  == 5.5  System ==
726 726  
727 -
728 728  === 5.5.1  System ~-~-> System Overview ===
729 729  
730 730  
... ... @@ -731,10 +731,9 @@
731 731  Shows the system info:
732 732  
733 733  
734 -[[image:1657155158184-134.png]]
720 +[[image:image-20220826091810-6.png]]
735 735  
736 736  
737 -
738 738  === 5.5.2  System ~-~-> General ( login settings) ===
739 739  
740 740  
... ... @@ -760,7 +760,6 @@
760 760  (((
761 761  (% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
762 762  
763 -
764 764  
765 765  )))
766 766  
... ... @@ -781,7 +781,6 @@
781 781  (((
782 782  (% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
783 783  
784 -
785 785  
786 786  )))
787 787  
... ... @@ -794,7 +794,6 @@
794 794  [[image:1657155457089-430.png]]
795 795  
796 796  
797 -
798 798  === 5.5.5  System ~-~-> Cellular ===
799 799  
800 800  
... ... @@ -807,7 +807,6 @@
807 807  (% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
808 808  
809 809  
810 -
811 811  === 5.5.6  System ~-~-> Network Status ===
812 812  
813 813  
... ... @@ -814,7 +814,6 @@
814 814  [[image:1657155554265-721.png]]
815 815  
816 816  
817 -
818 818  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
819 819  
820 820  
... ... @@ -831,7 +831,7 @@
831 831  
832 832  (% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
833 833  
834 -[[image:image-20220707092040-3.png||height="449" width="956"]]
814 +[[image:image-20220826091725-5.png||height="479" width="1004"]]
835 835  
836 836  
837 837  (((
... ... @@ -849,7 +849,6 @@
849 849  [[image:1652429624400-864.png||height="432" width="716"]]
850 850  
851 851  
852 -
853 853  === 5.5.8  System ~-~-> Firmware Upgrade ===
854 854  
855 855  
... ... @@ -907,7 +907,6 @@
907 907  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
908 908  
909 909  
910 -
911 911  === 5.5.9  System ~-~-> Reboot/Reset ===
912 912  
913 913  
... ... @@ -915,8 +915,6 @@
915 915  
916 916  (((
917 917  
918 -
919 -
920 920  )))
921 921  
922 922  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -928,10 +928,8 @@
928 928  Place to show what package has installed and possible to upgrade packages.
929 929  
930 930  
931 -
932 932  == 5.6  LogRead ==
933 933  
934 -
935 935  === 5.6.1  LogRead ~-~-> LoRa Log ===
936 936  
937 937  
... ... @@ -941,7 +941,6 @@
941 941  [[image:1657156300781-933.png]]
942 942  
943 943  
944 -
945 945  === 5.6.2  LogRead ~-~-> System Log ===
946 946  
947 947  
... ... @@ -951,10 +951,8 @@
951 951  [[image:1657156341198-226.png]]
952 952  
953 953  
954 -
955 955  = 6.  More features =
956 956  
957 -
958 958  == 6.1 Packet Filtering ==
959 959  
960 960  
... ... @@ -967,7 +967,6 @@
967 967  )))
968 968  
969 969  
970 -
971 971  == 6.2 Remote Access ==
972 972  
973 973  
... ... @@ -980,7 +980,6 @@
980 980  )))
981 981  
982 982  
983 -
984 984  == 6.3 How to decode ABP LoRaWAN node ==
985 985  
986 986  
... ... @@ -993,7 +993,6 @@
993 993  )))
994 994  
995 995  
996 -
997 997  == 6.4 How to set data to MQTT broker ==
998 998  
999 999  
... ... @@ -1003,20 +1003,78 @@
1003 1003  
1004 1004  (((
1005 1005  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
974 +
975 +
976 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
977 +
978 +
979 +If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
980 +
981 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
982 +
983 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
984 +
985 +
986 +If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
987 +
988 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
989 +
990 +Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
991 +
992 +
1006 1006  )))
1007 1007  
995 +(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
1008 1008  
997 +After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1009 1009  
1010 -== 6.5  More instructions ==
1011 1011  
1000 +== 6.6  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1012 1012  
1013 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1014 1014  
1003 +USB card reader plugged into the USB port of the gateway
1015 1015  
1016 1016  
1017 -== 6.6  Auto-Provision ==
1006 +Access the gateway Linux Command Line
1018 1018  
1019 1019  
1009 +Check the USB device
1010 +
1011 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1012 +
1013 +
1014 +**Mount the USB device**
1015 +
1016 +(% class="box infomessage" %)
1017 +(((
1018 +**mount /dev/sda1 /mnt/**
1019 +)))
1020 +
1021 +(% class="wikigeneratedid" %)
1022 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1023 +
1024 +
1025 +(% class="wikigeneratedid" %)
1026 +**Set up the automatic mount on boot**
1027 +
1028 +(% class="box infomessage" %)
1029 +(((
1030 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1031 +)))
1032 +
1033 +(% class="wikigeneratedid" %)
1034 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1035 +
1036 +
1037 +== 6.7  More instructions ==
1038 +
1039 +
1040 +[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
1041 +
1042 +
1043 +== 6.8  Auto-Provision ==
1044 +
1045 +
1020 1020  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
1021 1021  
1022 1022  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -1023,7 +1023,7 @@
1023 1023  
1024 1024  [[image:image-20220707092040-2.png||height="452" width="1002"]]
1025 1025  
1026 -[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
1052 +[[image:image-20220826091546-4.png]](% style="display:none" %)
1027 1027  
1028 1028  
1029 1029  (((
... ... @@ -1032,7 +1032,6 @@
1032 1032  
1033 1033  (% style="display:none" %) (%%)
1034 1034  
1035 -
1036 1036  = 7.  (% style="display:none" %) (%%)Linux System =
1037 1037  
1038 1038  
... ... @@ -1040,7 +1040,6 @@
1040 1040  
1041 1041  (% style="display:none" %) (%%)
1042 1042  
1043 -
1044 1044  == 7.1  SSH Access for Linux console ==
1045 1045  
1046 1046  
... ... @@ -1066,7 +1066,6 @@
1066 1066  [[image:1657158190234-805.png]]
1067 1067  
1068 1068  
1069 -
1070 1070  == 7.2  Edit and Transfer files ==
1071 1071  
1072 1072  
... ... @@ -1089,7 +1089,6 @@
1089 1089  [[image:1652431650755-450.png]]
1090 1090  
1091 1091  
1092 -
1093 1093  == 7.3  File System ==
1094 1094  
1095 1095  
... ... @@ -1106,7 +1106,6 @@
1106 1106  )))
1107 1107  
1108 1108  
1109 -
1110 1110  == 7.4  Package maintenance system ==
1111 1111  
1112 1112  
... ... @@ -1162,7 +1162,6 @@
1162 1162  (((
1163 1163  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1164 1164  
1165 -
1166 1166  
1167 1167  )))
1168 1168  
... ... @@ -1185,7 +1185,6 @@
1185 1185  )))
1186 1186  
1187 1187  
1188 -
1189 1189  == 8.1 Upgrade via Web UI ==
1190 1190  
1191 1191  
... ... @@ -1212,7 +1212,6 @@
1212 1212  [[image:1657158986600-386.png]]
1213 1213  
1214 1214  
1215 -
1216 1216  == 8.2 Upgrade via Linux console ==
1217 1217  
1218 1218  
... ... @@ -1230,13 +1230,17 @@
1230 1230  )))
1231 1231  
1232 1232  
1251 += 9.  OTA System Update =
1233 1233  
1234 -= 9.  FAQ =
1235 1235  
1254 +LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1236 1236  
1237 -== 9.1  How can I configure for a customized frequency band? ==
1238 1238  
1257 += 10.  FAQ =
1239 1239  
1259 +== 10.1  How can I configure for a customized frequency band? ==
1260 +
1261 +
1240 1240  (((
1241 1241  See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1242 1242  )))
... ... @@ -1243,11 +1243,9 @@
1243 1243  
1244 1244  (((
1245 1245  
1246 -
1247 -
1248 1248  )))
1249 1249  
1250 -== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1270 +== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1251 1251  
1252 1252  
1253 1253  (((
... ... @@ -1260,23 +1260,27 @@
1260 1260  
1261 1261  (((
1262 1262  
1263 -
1264 -
1265 1265  )))
1266 1266  
1267 -== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
1285 +== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1268 1268  
1269 1269  
1270 1270  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1271 1271  
1272 1272  
1291 +== 10.4  DIN Rail Mounting Reference. ==
1273 1273  
1274 -= 10.  Trouble Shooting =
1275 1275  
1294 +[[image:image-20240318095136-1.jpeg||height="785" width="785"]]
1276 1276  
1277 -== 10.1  I get kernel error when install new package, how to fix? ==
1296 +[[image:image-20240318095410-2.png||height="179" width="402"]]
1278 1278  
1279 1279  
1299 += 11.  Trouble Shooting =
1300 +
1301 +== 11.1  I get kernel error when install new package, how to fix? ==
1302 +
1303 +
1280 1280  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1281 1281  
1282 1282  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1298,10 +1298,9 @@
1298 1298  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1299 1299  
1300 1300  
1325 +== 11.2  How to recover the LPS8N if the firmware crashes ==
1301 1301  
1302 -== 10.2  How to recover the LPS8N if the firmware crashes ==
1303 1303  
1304 -
1305 1305  (((
1306 1306  Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1307 1307  )))
... ... @@ -1308,14 +1308,12 @@
1308 1308  
1309 1309  (((
1310 1310  
1311 -
1312 -
1313 1313  )))
1314 1314  
1315 -== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1336 +== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1316 1316  
1317 1317  
1318 -[[image:1657159323292-776.png]]
1339 +[[image:image-20231116112906-1.png]]
1319 1319  
1320 1320  
1321 1321  (((
... ... @@ -1327,7 +1327,7 @@
1327 1327  
1328 1328  **Steps to connect via fall back IP:**
1329 1329  
1330 -~1. Connect PC's Ethernet port to LG01's WAN port
1351 +~1. Connect PC's Ethernet port to LPS8N's WAN port
1331 1331  
1332 1332  2. Configure PC's Ethernet port has
1333 1333   IP: 172.31.255.253 and
... ... @@ -1344,10 +1344,9 @@
1344 1344  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1345 1345  
1346 1346  
1368 +== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1347 1347  
1348 -== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1349 1349  
1350 -
1351 1351  (((
1352 1352  This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1353 1353  )))
... ... @@ -1357,32 +1357,29 @@
1357 1357  )))
1358 1358  
1359 1359  
1380 += 12.  Order Info =
1360 1360  
1361 -= 11.  Order Info =
1362 1362  
1383 +**PART: (% style="color:blue" %)LPS8N-XXX-YYY: (%%)**
1363 1363  
1364 -**//PART: (% style="color:blue" %)LPS8N-XXX-YYY//: (%%)**
1385 +(% style="color:blue" %) **XXX:**(%%)** Frequency Band**
1365 1365  
1366 -
1367 -(% style="color:blue" %) **//XXX~://**(%%)**// Frequency Band//**
1368 -
1369 1369  * (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1370 1370  * (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1371 1371  
1372 -(% style="color:blue" %) **//YYY~://**(%%)**// 4G Cellular Option//**
1390 +(% style="color:blue" %) **YYY:**(%%)** 4G Cellular Option**
1373 1373  
1374 -* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1375 -* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1376 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1377 -* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1392 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1393 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1394 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1395 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1378 1378  
1379 1379  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1380 1380  
1381 1381  
1400 += 13.  Packing Info =
1382 1382  
1383 -= 12.  Packing Info =
1384 1384  
1385 -
1386 1386  (((
1387 1387  **Package Includes**:
1388 1388  )))
... ... @@ -1400,15 +1400,12 @@
1400 1400  * Package Size: 14.5 x 13.5 x 6 cm
1401 1401  * Weight: 300g
1402 1402  
1420 += 14.  Support =
1403 1403  
1404 1404  
1405 -
1406 -= 13.  Support =
1407 -
1408 1408  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1409 1409  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1410 1410  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1411 1411  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1412 1412  
1413 -
1414 1414  
image-20220826091810-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.0 KB
Content
image-20230406172421-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +85.6 KB
Content
image-20231116112906-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +76.0 KB
Content
image-20240318095136-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +547.3 KB
Content
image-20240318095410-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +80.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0