Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 158.3 >
edited by Xiaoling
on 2022/07/07 11:22
To version < 133.1 >
edited by Xiaoling
on 2022/07/06 18:20
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,7 +6,6 @@
6 6  
7 7  **Table of Contents：**
8 8  
9 -{{toc/}}
10 10  
11 11  
12 12  
... ... @@ -104,8 +104,6 @@
104 104  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
105 105  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
106 106  
107 -
108 -
109 109  == 1.3  Features ==
110 110  
111 111  * Open Source OpenWrt system
... ... @@ -122,8 +122,6 @@
122 122  * Support LoRaWAN basic station.
123 123  * Optional 3G/4G cellular connection
124 124  
125 -
126 -
127 127  == 1.4  Hardware System Structure ==
128 128  
129 129  [[image:1657079015096-949.png]]
... ... @@ -149,7 +149,6 @@
149 149  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
150 150  
151 151  
152 -
153 153  = 2.  Access and Configure LPS8N =
154 154  
155 155  (((
... ... @@ -238,8 +238,6 @@
238 238  * **WiFi Client Mode**
239 239  * **WiFi AP Mode**
240 240  
241 -
242 -
243 243  == 3.2  Use WAN port to access Internet ==
244 244  
245 245  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
... ... @@ -250,7 +250,7 @@
250 250  
251 251  == 3.3  Access the Internet as a WiFi Client ==
252 252  
253 -In the WiFi Client Mode, LPS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
245 +In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
254 254  
255 255  (((
256 256  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
... ... @@ -323,7 +323,7 @@
323 323  )))
324 324  
325 325  (((
326 -This chapter describes how to use the LPS8N to work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
318 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
327 327  )))
328 328  
329 329  
... ... @@ -364,7 +364,6 @@
364 364  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
365 365  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
366 366  
367 -
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 370  [[image:1657091941182-367.png]]
... ... @@ -374,6 +374,7 @@
374 374  
375 375  Open the following page:
376 376  
368 +
377 377   [[image:image-20220706155323-5.png||height="579" width="1060"]]
378 378  
379 379  
... ... @@ -389,7 +389,7 @@
389 389  [[image:1657094130908-567.png]](% style="display:none" %)
390 390  
391 391  
392 -== 4.2  Configure LPS8N to connect to TTN v3 ==
384 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
393 393  
394 394  (((
395 395  You can now configure the LPS8N to let it connect to TTN network V3.
... ... @@ -551,10 +551,8 @@
551 551  (((
552 552  
553 553  
554 -(((
555 555  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
556 556  )))
557 -)))
558 558  
559 559  [[image:1657094930903-357.png]]
560 560  
... ... @@ -561,7 +561,7 @@
561 561  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
562 562  
563 563  
564 -=== 5.2.2  LoRa ~-~-> ABP Decryption ===
554 +=== 5.2.2 LoRa ~-~-> ABP Decryption ===
565 565  
566 566  The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
567 567  
... ... @@ -602,7 +602,7 @@
602 602  
603 603  )))
604 604  
605 -=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
595 +=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
606 606  
607 607  (((
608 608  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -615,40 +615,34 @@
615 615  [[image:1652428648903-878.png||height="266" width="731"]]
616 616  
617 617  
618 -== 5.4  MQTT Settings ==
608 +== 5.4 MQTT Settings ==
619 619  
620 -(((
621 -If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
622 -)))
610 +If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
623 623  
624 -(((
625 625  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
626 -)))
627 627  
628 628  
629 629  [[image:1652428705046-212.png||height="417" width="733"]]
630 630  
631 631  
632 -== 5.5  System ==
618 +== 5.5 System ==
633 633  
634 -=== 5.5.1  System ~-~-> System Overview ===
620 +=== 5.5.1 System ~-~-> System Overview ===
635 635  
636 636  Shows the system info:
637 637  
638 -[[image:1657155158184-134.png]]
624 +[[image:1652428773760-580.png||height="408" width="728"]]
639 639  
626 +=== 5.5.2 System ~-~-> General ( login settings) ===
640 640  
628 +[[image:1652428861256-300.png||height="354" width="724"]]
641 641  
642 -=== 5.5.2  System ~-~-> General ( login settings) ===
643 -
644 -[[image:1657155183982-792.png]]
645 -
646 646  (((
647 647  **__System Password:__**
648 648  )))
649 649  
650 650  (((
651 -There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
635 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
652 652  )))
653 653  
654 654  (((
... ... @@ -656,106 +656,83 @@
656 656  )))
657 657  
658 658  (((
659 -**__Timezone:  __**Set device timezone.
643 +**__Timezone:__**Set device timezone.
660 660  )))
661 661  
662 662  (((
663 -**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
664 -
665 -
666 -
647 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
667 667  )))
668 668  
669 -=== 5.5.3  System ~-~-> Network ===
650 +=== 5.5.3 System ~-~-> Network ===
670 670  
671 -[[image:1657155288223-566.png]]
652 +[[image:1652429149053-824.png||height="467" width="725"]]
672 672  
673 673  (((
674 -**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
655 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
675 675  )))
676 676  
677 677  (((
678 -__**WAN Settings:  **__Setting for LPS8N WAN port
659 +__**WAN Settings:**__Setting for DLOS8N WAN port
679 679  )))
680 680  
681 681  (((
682 -__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
663 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
683 683  
684 -
685 685  
686 686  )))
687 687  
688 -=== 5.5.4  System ~-~-> WiFi ===
668 +=== 5.5.4 System ~-~-> WiFi ===
689 689  
690 -LPS8N WiFi Settings.
670 +DLOS8N WiFi Settings.
691 691  
692 -[[image:1657155457089-430.png]]
672 +[[image:1652429430767-921.png||height="367" width="723"]]
693 693  
674 +=== 5.5.5 System ~-~-> Cellular ===
694 694  
695 -
696 -=== 5.5.5  System ~-~-> Cellular ===
697 -
698 698  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
699 699  
678 +[[image:1652429309615-825.png||height="320" width="732"]]
700 700  
701 -[[image:1657155507672-204.png]]
680 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
702 702  
703 -(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
682 +=== 5.5.6 System ~-~-> Network Status ===
704 704  
684 +[[image:1652429486609-208.png||height="415" width="728"]]
705 705  
686 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
706 706  
707 -=== 5.5.6  System ~-~-> Network Status ===
708 -
709 -
710 -[[image:1657155554265-721.png]]
711 -
712 -
713 -
714 -=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
715 -
716 716  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
717 717  
690 +[[image:1652429518191-846.png||height="332" width="733"]]
718 718  
719 -[[image:image-20220707112053-4.png||height="451" width="995"]]
692 +[[image:1652429527544-247.png||height="327" width="724"]]
720 720  
721 -[[image:image-20220707112053-5.png||height="453" width="1004"]]
694 +[[image:1652429537849-154.png||height="339" width="722"]]
722 722  
723 -(% style="display:none" %)
696 +Please see this document for detail:
724 724  
725 -(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
726 -
727 -(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
728 -
729 -[[image:image-20220707092040-3.png||height="449" width="956"]]
730 -
731 -
732 732  (((
733 -Please see this document for detail:  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
699 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
734 734  )))
735 735  
736 -(% style="display:none" %) (%%)
737 737  
738 -(((
739 -R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]
740 -)))
703 +R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
741 741  
742 742  [[image:1652429624400-864.png||height="432" width="716"]]
743 743  
744 744  
708 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
745 745  
746 -=== 5.5.8  System ~-~-> Firmware Upgrade ===
710 +We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
747 747  
748 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
749 -
750 750  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
751 751  
752 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
714 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
753 753  
754 754  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
755 755  
756 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
718 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
757 757  
758 -
759 759  (((
760 760  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
761 761  )))
... ... @@ -764,22 +764,15 @@
764 764  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
765 765  )))
766 766  
767 -[[image:1657156052651-770.png]]
728 +[[image:1652429711145-862.png||height="270" width="737"]]
768 768  
769 -(((
770 770  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
771 -)))
772 772  
773 -
774 -(((
775 775  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
776 -)))
777 777  
778 -(((
779 779  The system will automatically boot into the new firmware after upgrade.
780 -)))
781 781  
782 -[[image:1657156094153-520.png]]
736 +[[image:1652429962190-224.png||height="358" width="729"]]
783 783  
784 784  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
785 785  
... ... @@ -787,111 +787,67 @@
787 787  
788 788  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
789 789  
790 -
791 791  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
792 792  
746 +=== 5.5.9 System ~-~-> Reboot/Reset ===
793 793  
794 -=== 5.5.9  System ~-~-> Reboot/Reset ===
795 -
796 796  [[image:1652430197132-330.png||height="256" width="724"]]
797 797  
798 798  (((
799 799  
800 -
801 -
802 802  )))
803 803  
804 -=== 5.5.10  System ~-~-> Package Maintain ===
754 +=== 5.5.10 System ~-~-> Package Maintain ===
805 805  
756 +[[image:1652430243826-126.png||height="289" width="723"]]
806 806  
807 -[[image:1657156199070-491.png]]
808 -
809 809  Place to show what package has installed and possible to upgrade packages.
810 810  
760 +== 5.6 LogRead ==
811 811  
762 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
812 812  
813 -== 5.6  LogRead ==
814 814  
815 -=== 5.6.1  LogRead ~-~-> LoRa Log ===
816 -
817 -
818 818  Show the frequency for LoRa Radio and traffics.
819 819  
820 -[[image:1657156300781-933.png]]
767 +[[image:image-20220615204306-1.png||height="575" width="733"]]
821 821  
822 822  
770 +Show the IoT Server Connection State and FWD State
823 823  
824 -=== 5.6.2  LogRead ~-~-> System Log ===
772 +[[image:image-20220616083933-1.png||height="556" width="729"]]
825 825  
826 -Show the system log
774 +DLOS8 can view GPS location in the Logread FWD State
827 827  
828 -[[image:1657156341198-226.png]]
829 829  
777 +Show the Error logs, RxTxJson lorawan packages, and PULL State
830 830  
779 +[[image:image-20220615205416-6.png||height="442" width="884"]]
831 831  
832 -= 6.  More features =
833 833  
834 -== 6.1 Packet Filtering ==
782 +=== 5.6.2 LogRead ~-~-> System Log ===
835 835  
836 -Drop unwanted packets.
784 +Show the system log
837 837  
838 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
786 +[[image:1652430369760-511.png||height="373" width="730"]]
839 839  
788 += 6. More features =
840 840  
841 -== 6.2 Remote Access ==
790 +== 6.1 More instructions ==
842 842  
843 -Remote Access Devices for management.
844 -
845 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/]]
846 -
847 -
848 -== 6.3 How to decode ABP LoRaWAN node ==
849 -
850 -Decode ABP:
851 -
852 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
853 -
854 -
855 -== 6.4 How to set data to MQTT broker ==
856 -
857 -Only support ABP LoRaWAN End Node
858 -
859 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
860 -
861 -
862 -== 6.5  More instructions ==
863 -
864 864  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
865 865  
866 866  
867 -== 6.6  Auto-Provision ==
795 += 7. Linux System =
868 868  
869 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
797 +The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
870 870  
871 -[[image:image-20220707092040-1.png||height="451" width="995"]]
799 +== 7.1 SSH Access for Linux console ==
872 872  
873 -[[image:image-20220707092040-2.png||height="452" width="1002"]]
801 +User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
874 874  
875 -[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
803 +IP address:  IP address of DLOS8N
876 876  
877 -Please see this document for detail:
878 -
879 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
880 -
881 -(% style="display:none" %) (%%)
882 -
883 -= 7.  (% style="display:none" %) (%%)Linux System =
884 -
885 -The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
886 -
887 -(% style="display:none" %) (%%)
888 -
889 -== 7.1  SSH Access for Linux console ==
890 -
891 -User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
892 -
893 -IP address:  IP address of LPS8N
894 -
895 895  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
896 896  
897 897  User Name:      (% style="color:green" %)**root**
... ... @@ -900,20 +900,17 @@
900 900  
901 901  After logging in, you will be in the Linux console and can enter commands as shown below.
902 902  
813 +[[image:1652431588565-830.png]]
903 903  
904 -[[image:1657158198733-338.png]]
905 -
906 906  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
907 907  
817 +[[image:1652431609193-637.png||height="214" width="732"]]
908 908  
909 -[[image:1657158190234-805.png]]
910 910  
820 +== 7.2 Edit and Transfer files ==
911 911  
912 -
913 -== 7.2  Edit and Transfer files ==
914 -
915 915  (((
916 -The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
823 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
917 917  )))
918 918  
919 919  (((
... ... @@ -921,7 +921,7 @@
921 921  )))
922 922  
923 923  (((
924 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LPS8N, or edit the files directly in the windows.
831 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
925 925  )))
926 926  
927 927  (((
... ... @@ -931,15 +931,14 @@
931 931  [[image:1652431650755-450.png]]
932 932  
933 933  
841 +== 7.3 File System ==
934 934  
935 -== 7.3  File System ==
936 -
937 937  (((
938 -The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
844 +The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
939 939  )))
940 940  
941 941  (((
942 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the LPS8N flash.
848 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
943 943  )))
944 944  
945 945  (((
... ... @@ -947,9 +947,9 @@
947 947  )))
948 948  
949 949  
950 -== 7.4  Package maintenance system ==
856 +== 7.4 Package maintenance system ==
951 951  
952 -LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
858 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
953 953  
954 954  (((
955 955  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
... ... @@ -960,11 +960,11 @@
960 960  )))
961 961  
962 962  (((
963 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**             (% style="color:black" %)~/~/ to get the latest packages list
869 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
964 964  )))
965 965  
966 966  (((
967 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
873 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
968 968  )))
969 969  
970 970  (((
... ... @@ -1000,101 +1000,47 @@
1000 1000  
1001 1001  (((
1002 1002  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1003 -
1004 -
1005 -
1006 1006  )))
1007 1007  
1008 -= 8.  Upgrade Linux Firmware =
911 += 8. Upgrade Linux Firmware =
1009 1009  
1010 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
1011 1011  
1012 -* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
914 += 9. FAQ =
1013 1013  
1014 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
916 +== 9.1 How can I configure for a customized frequency band? ==
1015 1015  
1016 -* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
1017 -
1018 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
1019 -
1020 -
1021 -The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
1022 -
1023 -
1024 -== 8.1 Upgrade via Web UI ==
1025 -
1026 1026  (((
1027 -Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
919 +See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1028 1028  )))
1029 1029  
1030 1030  (((
1031 -Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
923 +
1032 1032  )))
1033 1033  
926 +== 9.2 Can I connect DLOS8N to LORIOT? ==
1034 1034  
1035 -(((
1036 -(% style="color:red" %)**NOTE**(%%): You normally need to **//uncheck//** the //**Preserve Settings**// checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1037 -)))
928 +Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1038 1038  
1039 1039  
1040 -(((
1041 -The system will automatically boot into the new firmware after upgrade.
1042 -)))
931 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1043 1043  
1044 -[[image:1657158986600-386.png]]
1045 -
1046 -
1047 -== 8.2 Upgrade via Linux console ==
1048 -
1049 1049  (((
1050 -SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
934 +Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1051 1051  )))
1052 1052  
1053 1053  (((
1054 -(% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1055 -)))
1056 -
1057 -
1058 -(((
1059 -(% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1060 -)))
1061 -
1062 -
1063 -
1064 -= 9.  FAQ =
1065 -
1066 -== 9.1  How can I configure for a customized frequency band? ==
1067 -
1068 -(((
1069 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1070 -)))
1071 -
1072 -(((
1073 -
1074 -)))
1075 -
1076 -== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1077 -
1078 -(((
1079 -Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
1080 -)))
1081 -
1082 -(((
1083 1083  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1084 1084  )))
1085 1085  
1086 -(((
1087 -
1088 -)))
1089 1089  
1090 -== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
942 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1091 1091  
1092 1092  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1093 1093  
1094 1094  
1095 -= 10.  Trouble Shooting =
947 += 10. Trouble Shooting =
1096 1096  
1097 -== 10.1  I get kernel error when install new package, how to fix? ==
949 +== 10.1 I get kernel error when install new package, how to fix? ==
1098 1098  
1099 1099  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1100 1100  
... ... @@ -1117,7 +1117,7 @@
1117 1117  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1118 1118  
1119 1119  
1120 -== 10.2  How to recover the LPS8N if the firmware crashes ==
972 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1121 1121  
1122 1122  (((
1123 1123  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -1127,13 +1127,12 @@
1127 1127  
1128 1128  )))
1129 1129  
1130 -== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
982 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1131 1131  
1132 -[[image:1657159323292-776.png]]
984 +[[image:1652435238615-272.png||height="247" width="727"]]
1133 1133  
1134 -
1135 1135  (((
1136 -The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
987 +The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1137 1137  )))
1138 1138  
1139 1139  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1141,9 +1141,9 @@
1141 1141  
1142 1142  Steps to connect via fall back IP:
1143 1143  
1144 -~1. Connect PC's Ethernet port to LG01's WAN port
995 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1145 1145  
1146 -2. Configure PC's Ethernet port has
997 +2. Configure PC’s Ethernet port has
1147 1147   IP: 172.31.255.253 and
1148 1148   Netmask: 255.255.255.252
1149 1149  
... ... @@ -1151,45 +1151,31 @@
1151 1151  
1152 1152  [[image:1652435256286-879.png]]
1153 1153  
1154 -3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1005 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1155 1155  
1156 1156  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1157 1157  
1158 1158  
1159 -== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1010 += 11. Order Info =
1160 1160  
1161 -(((
1162 -This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1163 -)))
1012 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1164 1164  
1165 -(((
1166 -In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1167 -)))
1168 -
1169 -
1170 -= 11.  Order Info =
1171 -
1172 -
1173 -(% style="color:#4f81bd" %)**//PART: LPS8N-XXX-YYY//: **
1174 -
1175 -
1176 1176  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1177 1177  
1178 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1179 -* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1016 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1017 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1180 1180  
1181 -
1182 1182  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1183 1183  
1184 -* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1185 -* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1186 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1187 -* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1021 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1022 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1023 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1024 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1188 1188  
1189 1189  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1190 1190  
1191 1191  
1192 -= 12.  Packing Info =
1029 += 12. Packing Info =
1193 1193  
1194 1194  (((
1195 1195  **Package Includes**:
... ... @@ -1208,11 +1208,8 @@
1208 1208  * Package Size: 14.5 x 13.5 x 6 cm
1209 1209  * Weight: 300g
1210 1210  
1048 += 13. Support =
1211 1211  
1212 -
1213 -
1214 -= 13.  Support =
1215 -
1216 1216  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1217 1217  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1218 1218  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1657155158184-134.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1657158986600-386.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657159323292-776.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.5 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content
image-20220707112053-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.4 KB
Content
image-20220707112053-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0