Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 156.10 >
edited by Xiaoling
on 2022/07/07 10:13
To version < 139.1 >
edited by Xiaoling
on 2022/07/07 08:58
>
Change comment: Uploaded new attachment "1657155507672-204.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -6,7 +6,6 @@
6 6  
7 7  **Table of Contents：**
8 8  
9 -{{toc/}}
10 10  
11 11  
12 12  
... ... @@ -106,7 +106,6 @@
106 106  
107 107  
108 108  
109 -
110 110  == 1.3  Features ==
111 111  
112 112  * Open Source OpenWrt system
... ... @@ -125,7 +125,6 @@
125 125  
126 126  
127 127  
128 -
129 129  == 1.4  Hardware System Structure ==
130 130  
131 131  [[image:1657079015096-949.png]]
... ... @@ -152,7 +152,6 @@
152 152  
153 153  
154 154  
155 -
156 156  = 2.  Access and Configure LPS8N =
157 157  
158 158  (((
... ... @@ -241,6 +241,8 @@
241 241  * **WiFi Client Mode**
242 242  * **WiFi AP Mode**
243 243  
240 +
241 +
244 244  == 3.2  Use WAN port to access Internet ==
245 245  
246 246  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
... ... @@ -365,6 +365,8 @@
365 365  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
366 366  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
367 367  
366 +
367 +
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 370  [[image:1657091941182-367.png]]
... ... @@ -560,7 +560,7 @@
560 560  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
561 561  
562 562  
563 -=== 5.2.2  LoRa ~-~-> ABP Decryption ===
563 +=== 5.2.2 LoRa ~-~-> ABP Decryption ===
564 564  
565 565  The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
566 566  
... ... @@ -601,7 +601,7 @@
601 601  
602 602  )))
603 603  
604 -=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
604 +=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
605 605  
606 606  (((
607 607  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -614,9 +614,9 @@
614 614  [[image:1652428648903-878.png||height="266" width="731"]]
615 615  
616 616  
617 -== 5.4  MQTT Settings ==
617 +== 5.4 MQTT Settings ==
618 618  
619 -If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
619 +If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
620 620  
621 621  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
622 622  
... ... @@ -624,9 +624,9 @@
624 624  [[image:1652428705046-212.png||height="417" width="733"]]
625 625  
626 626  
627 -== 5.5  System ==
627 +== 5.5 System ==
628 628  
629 -=== 5.5.1  System ~-~-> System Overview ===
629 +=== 5.5.1 System ~-~-> System Overview ===
630 630  
631 631  Shows the system info:
632 632  
... ... @@ -634,7 +634,7 @@
634 634  
635 635  
636 636  
637 -=== 5.5.2  System ~-~-> General ( login settings) ===
637 +=== 5.5.2 System ~-~-> General ( login settings) ===
638 638  
639 639  [[image:1657155183982-792.png]]
640 640  
... ... @@ -643,7 +643,7 @@
643 643  )))
644 644  
645 645  (((
646 -There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
646 +There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
647 647  )))
648 648  
649 649  (((
... ... @@ -661,86 +661,76 @@
661 661  
662 662  )))
663 663  
664 -=== 5.5.3  System ~-~-> Network ===
664 +=== 5.5.3 System ~-~-> Network ===
665 665  
666 -[[image:1657155288223-566.png]]
666 +[[image:1652429149053-824.png||height="467" width="725"]]
667 667  
668 668  (((
669 -**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
669 +**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
670 670  )))
671 671  
672 672  (((
673 -__**WAN Settings:  **__Setting for LPS8N WAN port
673 +__**WAN Settings:**__Setting for DLOS8N WAN port
674 674  )))
675 675  
676 676  (((
677 -__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
677 +__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
678 678  
679 -
680 680  
681 681  )))
682 682  
683 -=== 5.5.4  System ~-~-> WiFi ===
682 +=== 5.5.4 System ~-~-> WiFi ===
684 684  
685 -LPS8N WiFi Settings.
684 +DLOS8N WiFi Settings.
686 686  
687 -[[image:1657155457089-430.png]]
686 +[[image:1652429430767-921.png||height="367" width="723"]]
688 688  
688 +=== 5.5.5 System ~-~-> Cellular ===
689 689  
690 -
691 -=== 5.5.5  System ~-~-> Cellular ===
692 -
693 693  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
694 694  
692 +[[image:1652429309615-825.png||height="320" width="732"]]
695 695  
696 -[[image:1657155507672-204.png]]
694 +(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
697 697  
698 -(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
696 +=== 5.5.6 System ~-~-> Network Status ===
699 699  
698 +[[image:1652429486609-208.png||height="415" width="728"]]
700 700  
700 +=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
701 701  
702 -=== 5.5.6  System ~-~-> Network Status ===
702 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
703 703  
704 +[[image:1652429518191-846.png||height="332" width="733"]]
704 704  
705 -[[image:1657155554265-721.png]]
706 +[[image:1652429527544-247.png||height="327" width="724"]]
706 706  
708 +[[image:1652429537849-154.png||height="339" width="722"]]
707 707  
710 +Please see this document for detail:
708 708  
709 -=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
712 +(((
713 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
714 +)))
710 710  
711 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:(% style="display:none" %) 
712 712  
713 -(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
714 -
715 -(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
716 -
717 -[[image:image-20220707092040-3.png||height="449" width="956"]]
718 -
719 -
720 -Please see this document for detail:(% style="display:none" %)
721 -
722 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
723 -
724 -
725 725  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
726 726  
727 727  [[image:1652429624400-864.png||height="432" width="716"]]
728 728  
729 729  
722 +=== 5.5.8 System ~-~-> Firmware Upgrade ===
730 730  
731 -=== 5.5.8  System ~-~-> Firmware Upgrade ===
724 +We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
732 732  
733 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
734 -
735 735  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
736 736  
737 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
728 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
738 738  
739 739  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
740 740  
741 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
732 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
742 742  
743 -
744 744  (((
745 745  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
746 746  )))
... ... @@ -749,16 +749,15 @@
749 749  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
750 750  )))
751 751  
752 -[[image:1657156052651-770.png]]
742 +[[image:1652429711145-862.png||height="270" width="737"]]
753 753  
754 754  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
755 755  
756 -
757 757  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
758 758  
759 759  The system will automatically boot into the new firmware after upgrade.
760 760  
761 -[[image:1657156094153-520.png]]
750 +[[image:1652429962190-224.png||height="358" width="729"]]
762 762  
763 763  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
764 764  
... ... @@ -766,111 +766,67 @@
766 766  
767 767  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
768 768  
769 -
770 770  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
771 771  
760 +=== 5.5.9 System ~-~-> Reboot/Reset ===
772 772  
773 -=== 5.5.9  System ~-~-> Reboot/Reset ===
774 -
775 775  [[image:1652430197132-330.png||height="256" width="724"]]
776 776  
777 777  (((
778 778  
779 -
780 -
781 781  )))
782 782  
783 -=== 5.5.10  System ~-~-> Package Maintain ===
768 +=== 5.5.10 System ~-~-> Package Maintain ===
784 784  
770 +[[image:1652430243826-126.png||height="289" width="723"]]
785 785  
786 -[[image:1657156199070-491.png]]
787 -
788 788  Place to show what package has installed and possible to upgrade packages.
789 789  
774 +== 5.6 LogRead ==
790 790  
776 +=== 5.6.1 LogRead ~-~-> LoRa Log ===
791 791  
792 -== 5.6  LogRead ==
793 793  
794 -=== 5.6.1  LogRead ~-~-> LoRa Log ===
795 -
796 -
797 797  Show the frequency for LoRa Radio and traffics.
798 798  
799 -[[image:1657156300781-933.png]]
781 +[[image:image-20220615204306-1.png||height="575" width="733"]]
800 800  
801 801  
784 +Show the IoT Server Connection State and FWD State
802 802  
803 -=== 5.6.2  LogRead ~-~-> System Log ===
786 +[[image:image-20220616083933-1.png||height="556" width="729"]]
804 804  
805 -Show the system log
788 +DLOS8 can view GPS location in the Logread FWD State
806 806  
807 -[[image:1657156341198-226.png]]
808 808  
791 +Show the Error logs, RxTxJson lorawan packages, and PULL State
809 809  
793 +[[image:image-20220615205416-6.png||height="442" width="884"]]
810 810  
811 -= 6.  More features =
812 812  
813 -== 6.1 Packet Filtering ==
796 +=== 5.6.2 LogRead ~-~-> System Log ===
814 814  
815 -Drop unwanted packets.
798 +Show the system log
816 816  
817 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
800 +[[image:1652430369760-511.png||height="373" width="730"]]
818 818  
802 += 6. More features =
819 819  
820 -== 6.2 Remote Access ==
804 +== 6.1 More instructions ==
821 821  
822 -Remote Access Devices for management.
823 -
824 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/]]
825 -
826 -
827 -== 6.3 How to decode ABP LoRaWAN node ==
828 -
829 -Decode ABP:
830 -
831 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
832 -
833 -
834 -== 6.4 How to set data to MQTT broker ==
835 -
836 -Only support ABP LoRaWAN End Node
837 -
838 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
839 -
840 -
841 -== 6.5  More instructions ==
842 -
843 843  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
844 844  
845 845  
846 -== 6.6  Auto-Provision ==
809 += 7. Linux System =
847 847  
848 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
811 +The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
849 849  
850 -[[image:image-20220707092040-1.png||height="451" width="995"]]
813 +== 7.1 SSH Access for Linux console ==
851 851  
852 -[[image:image-20220707092040-2.png||height="452" width="1002"]]
815 +User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
853 853  
854 -[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
817 +IP address:  IP address of DLOS8N
855 855  
856 -Please see this document for detail:
857 -
858 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
859 -
860 -(% style="display:none" %) (%%)
861 -
862 -= 7.  (% style="display:none" %) (%%)Linux System =
863 -
864 -The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
865 -
866 -(% style="display:none" %) (%%)
867 -
868 -== 7.1  SSH Access for Linux console ==
869 -
870 -User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
871 -
872 -IP address:  IP address of LPS8N
873 -
874 874  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
875 875  
876 876  User Name:      (% style="color:green" %)**root**
... ... @@ -879,20 +879,17 @@
879 879  
880 880  After logging in, you will be in the Linux console and can enter commands as shown below.
881 881  
827 +[[image:1652431588565-830.png]]
882 882  
883 -[[image:1657158198733-338.png]]
884 -
885 885  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
886 886  
831 +[[image:1652431609193-637.png||height="214" width="732"]]
887 887  
888 -[[image:1657158190234-805.png]]
889 889  
834 +== 7.2 Edit and Transfer files ==
890 890  
891 -
892 -== 7.2  Edit and Transfer files ==
893 -
894 894  (((
895 -The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
837 +The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
896 896  )))
897 897  
898 898  (((
... ... @@ -900,7 +900,7 @@
900 900  )))
901 901  
902 902  (((
903 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LPS8N, or edit the files directly in the windows.
845 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
904 904  )))
905 905  
906 906  (((
... ... @@ -910,15 +910,14 @@
910 910  [[image:1652431650755-450.png]]
911 911  
912 912  
855 +== 7.3 File System ==
913 913  
914 -== 7.3  File System ==
915 -
916 916  (((
917 -The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
858 +The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
918 918  )))
919 919  
920 920  (((
921 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the LPS8N flash.
862 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
922 922  )))
923 923  
924 924  (((
... ... @@ -926,9 +926,9 @@
926 926  )))
927 927  
928 928  
929 -== 7.4  Package maintenance system ==
870 +== 7.4 Package maintenance system ==
930 930  
931 -LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
872 +DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
932 932  
933 933  (((
934 934  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
... ... @@ -939,11 +939,11 @@
939 939  )))
940 940  
941 941  (((
942 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**             (% style="color:black" %)~/~/ to get the latest packages list
883 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
943 943  )))
944 944  
945 945  (((
946 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
887 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
947 947  )))
948 948  
949 949  (((
... ... @@ -979,57 +979,15 @@
979 979  
980 980  (((
981 981  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
982 -
983 -
984 -
985 985  )))
986 986  
987 -= 8.  Upgrade Linux Firmware =
925 += 8. Upgrade Linux Firmware =
988 988  
989 -We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
990 990  
991 -* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
928 += 9. FAQ =
992 992  
993 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
930 +== 9.1 How can I configure for a customized frequency band? ==
994 994  
995 -* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
996 -
997 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
998 -
999 -
1000 -The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
1001 -
1002 -
1003 -== 8.1 Upgrade via Web UI ==
1004 -
1005 -Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1006 -
1007 -Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
1008 -
1009 -
1010 -(% style="color:red" %)**NOTE**(%%): You normally need to **//uncheck//** the //**Preserve Settings**// checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1011 -
1012 -
1013 -The system will automatically boot into the new firmware after upgrade.
1014 -
1015 -[[image:1657158986600-386.png]]
1016 -
1017 -
1018 -== 8.2 Upgrade via Linux console ==
1019 -
1020 -SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1021 -
1022 -(% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1023 -
1024 -
1025 -(% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1026 -
1027 -
1028 -
1029 -= 9.  FAQ =
1030 -
1031 -== 9.1  How can I configure for a customized frequency band? ==
1032 -
1033 1033  (((
1034 1034  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1035 1035  )))
... ... @@ -1038,11 +1038,15 @@
1038 1038  
1039 1039  )))
1040 1040  
1041 -== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
940 +== 9.2 Can I connect DLOS8N to LORIOT? ==
1042 1042  
942 +Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1043 1043  
944 +
945 +== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
946 +
1044 1044  (((
1045 -Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
948 +Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1046 1046  )))
1047 1047  
1048 1048  (((
... ... @@ -1049,18 +1049,15 @@
1049 1049  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1050 1050  )))
1051 1051  
1052 -(((
1053 -
1054 -)))
1055 1055  
1056 -== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
956 +== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1057 1057  
1058 1058  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1059 1059  
1060 1060  
1061 -= 10.  Trouble Shooting =
961 += 10. Trouble Shooting =
1062 1062  
1063 -== 10.1  I get kernel error when install new package, how to fix? ==
963 +== 10.1 I get kernel error when install new package, how to fix? ==
1064 1064  
1065 1065  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1066 1066  
... ... @@ -1083,7 +1083,7 @@
1083 1083  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1084 1084  
1085 1085  
1086 -== 10.2  How to recover the LPS8N if the firmware crashes ==
986 +== 10.2 How to recover the DLOS8N if the firmware crashes ==
1087 1087  
1088 1088  (((
1089 1089  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -1093,13 +1093,12 @@
1093 1093  
1094 1094  )))
1095 1095  
1096 -== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
996 +== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1097 1097  
1098 -[[image:1657159323292-776.png]]
998 +[[image:1652435238615-272.png||height="247" width="727"]]
1099 1099  
1100 -
1101 1101  (((
1102 -The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1001 +The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1103 1103  )))
1104 1104  
1105 1105  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1107,9 +1107,9 @@
1107 1107  
1108 1108  Steps to connect via fall back IP:
1109 1109  
1110 -~1. Connect PC's Ethernet port to LG01's WAN port
1009 +~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1111 1111  
1112 -2. Configure PC's Ethernet port has
1011 +2. Configure PC’s Ethernet port has
1113 1113   IP: 172.31.255.253 and
1114 1114   Netmask: 255.255.255.252
1115 1115  
... ... @@ -1117,41 +1117,26 @@
1117 1117  
1118 1118  [[image:1652435256286-879.png]]
1119 1119  
1120 -3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1019 +3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1121 1121  
1122 1122  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1123 1123  
1124 1124  
1125 -== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1024 += 11. Order Info =
1126 1126  
1127 -(((
1128 -This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1129 -)))
1026 +(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1130 1130  
1131 -(((
1132 -In the old version, user can use the [[fall back ip method >>path:#_I_configured_LPS8]]to access and configure the device.
1133 -)))
1134 -
1135 -
1136 -= 11.  Order Info =
1137 -
1138 -
1139 -(% style="color:#4f81bd" %)**//PART: LPS8N-XXX-YYY//: **
1140 -
1141 -
1142 1142  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1143 1143  
1144 -* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1145 -* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1030 +* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1031 +* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1146 1146  
1147 -
1148 -
1149 1149  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1150 1150  
1151 -* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1152 -* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1153 -* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1154 -* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1035 +* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1036 +* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1037 +* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1038 +* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1155 1155  
1156 1156  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1157 1157  
... ... @@ -1175,10 +1175,6 @@
1175 1175  * Package Size: 14.5 x 13.5 x 6 cm
1176 1176  * Weight: 300g
1177 1177  
1178 -
1179 -
1180 -
1181 -
1182 1182  = 13. Support =
1183 1183  
1184 1184  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657155554265-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.4 KB
Content
1657158986600-386.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -100.3 KB
Content
1657159323292-776.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.5 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -142.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0