Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 156.1 >
edited by Xiaoling
on 2022/07/07 10:02
To version < 184.1 >
edited by Edwin Chen
on 2024/03/18 09:55
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N - LoRaWAN Gateway User Manual
1 +LPS8N -- LoRaWAN Gateway User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -4,8 +4,9 @@
4 4  
5 5  
6 6  
7 -**Table of Contents：**
7 +**Table of Contents:**
8 8  
9 +{{toc/}}
9 9  
10 10  
11 11  
... ... @@ -12,28 +12,21 @@
12 12  
13 13  
14 14  
16 += 1.  Introduction =
15 15  
16 -
17 -
18 -
19 -
20 -
21 -(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
22 -
23 23  == 1.1  What is the LPS8N ==
24 24  
25 25  
26 -
27 27  (((
28 -The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
22 +The LPS8N is an (% style="color:blue" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 29  )))
30 30  
31 31  (((
32 -The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
26 +The LPS8N uses (% style="color:blue" %)**Semtech packet forwarder**(%%) & (% style="color:blue" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
33 33  )))
34 34  
35 35  (((
36 -LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
30 +LPS8N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands** (%%)to use in their own LoRa network.
37 37  )))
38 38  
39 39  (((
... ... @@ -40,11 +40,8 @@
40 40  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 41  )))
42 42  
43 -(((
44 -
45 -)))
46 46  
47 -[[image:1656918270059-192.png]]
38 +[[image:image-20220826090251-1.png]]
48 48  
49 49  
50 50  == 1.2  Specifications ==
... ... @@ -88,7 +88,7 @@
88 88  * Up to -140 dBm sensitivity
89 89  * 70 dB CW interferer rejection at 1 MHz offset
90 90  * Able to operate with negative SNR, CCR up to 9dB
91 -* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
82 +* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
92 92  * Dual digital TX & RX radio front-end interfaces
93 93  * 10 programmable parallel demodulation paths
94 94  * Dynamic data-rate (DDR) adaptation
... ... @@ -105,6 +105,7 @@
105 105  
106 106  == 1.3  Features ==
107 107  
99 +
108 108  * Open Source OpenWrt system
109 109  * Managed by Web GUI, SSH via WAN or WiFi
110 110  * Remote access with Reverse-SSH or remote.it
... ... @@ -121,11 +121,13 @@
121 121  
122 122  == 1.4  Hardware System Structure ==
123 123  
124 -[[image:1657079015096-949.png]]
125 125  
117 +[[image:image-20220830153228-1.png]]
126 126  
119 +
127 127  == 1.5  LPS8N Applications ==
128 128  
122 +
129 129  [[image:1657079055940-721.png]]
130 130  
131 131  
... ... @@ -135,7 +135,7 @@
135 135  LPS8N has totally four LEDs, They are:
136 136  
137 137  * **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
138 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
132 +* **Wireless LED** [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LG308N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20220705165446-6.png?width=15&height=15&rev=1.1||alt="image-20220705165446-6.png" height="15" width="15"]]: No function yet.
139 139  * **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
140 140  ** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
141 141  ** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
... ... @@ -143,8 +143,25 @@
143 143  
144 144  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
145 145  
140 +== 1.7 Button Instruction ==
141 +
142 +
143 +LPS8N has a black toggle button, which is:
144 +
145 +
146 +(% style="color:blue" %)**//➢ //Long press 4-5s:                     **(%%)the gateway will reload the Network and Initialize wifi configuration
147 +
148 + **LED status: ** SYS LED will BLINKING BLUE Until the reload is finished.
149 +
150 +
151 +(% style="color:blue" %)**➢ Long press more than 30s:    **(%%)the gateway will restart and restore factory settings.
152 +
153 + **LED status: ** When the user releases the button, the LED will TURN OFF.
154 +
155 +
146 146  = 2.  Access and Configure LPS8N =
147 147  
158 +
148 148  (((
149 149  The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
150 150  )))
... ... @@ -154,35 +154,37 @@
154 154  
155 155  === 2.1.1  Connect via WiFi ===
156 156  
168 +
157 157  [[image:1657085974260-168.png]]
158 158  
159 159  
160 160  At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
161 161  
174 +
162 162  [[image:1652413127647-377.png]]
163 163  
164 164  
165 165  (((
166 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
179 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LPS8N has the default IP (% style="color:green" %)10.130.1.1
167 167  
168 -
169 169  
170 170  )))
171 171  
172 172  === 2.1.2  Connect via Ethernet with DHCP IP from router ===
173 173  
186 +
174 174  [[image:1657086105922-299.png]]
175 175  
176 176  
177 177  (((
178 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
191 +Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
179 179  
180 -
181 181  
182 182  )))
183 183  
184 184  === 2.1.3  Connect via WiFi with DHCP IP from router ===
185 185  
198 +
186 186  [[image:1657086192720-649.png]]
187 187  
188 188  
... ... @@ -189,15 +189,15 @@
189 189  If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
190 190  
191 191  
192 -
193 193  === 2.1.4  Connect via Ethernet with fall back ip ===
194 194  
195 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
196 196  
208 +The WAN port also has a [[fall back ip address>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H11.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
197 197  
198 198  
199 199  == 2.2  Access Configure Web UI ==
200 200  
213 +
201 201  **Web Interface**
202 202  
203 203  Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
... ... @@ -213,18 +213,18 @@
213 213  
214 214  The account details for Web Login are:
215 215  
216 -(% style="color:#4f81bd" %)**User Name: root**
229 +(% style="color:blue" %)**User Name: root**
217 217  
218 -(% style="color:#4f81bd" %)**Password:   dragino**
231 +(% style="color:blue" %)**Password:   dragino**
219 219  
220 220  [[image:1652414287022-223.png]]
221 221  
222 222  
223 -
224 224  = 3.  Typical Network Setup =
225 225  
226 226  == 3.1  Overview ==
227 227  
240 +
228 228  The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
229 229  
230 230  * **WAN Port Internet Mode**
... ... @@ -233,6 +233,7 @@
233 233  
234 234  == 3.2  Use WAN port to access Internet ==
235 235  
249 +
236 236  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
237 237  
238 238  
... ... @@ -241,11 +241,13 @@
241 241  
242 242  == 3.3  Access the Internet as a WiFi Client ==
243 243  
244 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
245 245  
259 +In the WiFi Client Mode, LPS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
260 +
246 246  (((
247 247  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
248 248  
264 +
249 249  [[image:1657088818095-182.png]]
250 250  )))
251 251  
... ... @@ -258,6 +258,7 @@
258 258  
259 259  == 3.4  Use built-in 4G modem for internet access ==
260 260  
277 +
261 261  (((
262 262  (((
263 263  If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
... ... @@ -286,6 +286,8 @@
286 286  
287 287  (((
288 288  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
306 +
307 +
289 289  )))
290 290  
291 291  (((
... ... @@ -295,6 +295,7 @@
295 295  
296 296  == 3.5  Check Internet connection ==
297 297  
317 +
298 298  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
299 299  
300 300  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
... ... @@ -304,47 +304,60 @@
304 304  [[image:1657091099235-452.png]]
305 305  
306 306  
307 -
308 308  = 4.  Example: Configure as a LoRaWAN gateway =
309 309  
329 +
310 310  LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
311 311  
332 +
312 312  (((
313 -[[image:1657091257648-882.png]]
334 +[[image:image-20220826090251-1.png]]
314 314  )))
315 315  
316 316  (((
317 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
338 +This chapter describes how to use the LPS8N to work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
318 318  )))
319 319  
320 320  
321 -
322 322  == 4.1  Create a gateway in TTN V3 Server ==
323 323  
324 -(% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
325 325  
345 +(% style="color:blue" %)**Step 1: Get a Unique gateway ID.**
346 +
347 +
326 326  (((
327 327  Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
350 +
351 +
328 328  )))
329 329  
330 330  (((
331 331  [[image:1657091583941-544.png]]
356 +
357 +
332 332  )))
333 333  
334 334  The example gateway id is: (% style="color:green" %)**a840411e96744154**
335 335  
336 336  
337 -(% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
338 338  
364 +(% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
365 +
366 +
339 339  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
340 340  
369 +
341 341  [[image:1657091739530-531.png]]
342 342  
343 343  
344 -(% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
345 345  
374 +(% style="color:blue" %)**Step 3: Choose the TTNv3 Cluster Picker**
375 +
376 +
346 346  (((
347 347  [[image:1657091719947-297.png]]
379 +
380 +
348 348  )))
349 349  
350 350  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
... ... @@ -355,8 +355,9 @@
355 355  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
356 356  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
357 357  
358 -(% style="color:#4f81bd" %)**Step 4: Create a Gateway**
391 +(% style="color:blue" %)**Step 4: Create a Gateway**
359 359  
393 +
360 360  [[image:1657091941182-367.png]]
361 361  
362 362  Click the Gateway icon and then click Add gateway.
... ... @@ -372,7 +372,9 @@
372 372  
373 373  
374 374  (((
375 -(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
409 +(% style="color:red" %)**Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.**
410 +
411 +
376 376  )))
377 377  
378 378  After creating the gateway, you can see the gateway info, as below.
... ... @@ -380,8 +380,9 @@
380 380  [[image:1657094130908-567.png]](% style="display:none" %)
381 381  
382 382  
383 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
419 +== 4.2  Configure LPS8N to connect to TTN v3 ==
384 384  
421 +
385 385  (((
386 386  You can now configure the LPS8N to let it connect to TTN network V3.
387 387  )))
... ... @@ -391,19 +391,24 @@
391 391  )))
392 392  
393 393  (((
394 -Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
431 +Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply.**
432 +
433 +
395 395  )))
396 396  
397 397  [[image:1657094183213-301.png]]
398 398  
399 -(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
400 400  
439 +(% style="color:red" %)**Note: The server address must match the Gateway server address you choose in TTN V3.**
401 401  
441 +
402 402  In the home page, we can see the LoRaWAN connection is ready now.
403 403  
444 +
404 404  [[image:1657094202420-798.png]]
405 405  
406 406  
448 +
407 407  In TTN v3 portal, we can also see the gateway is connected.
408 408  
409 409  [[image:1657094221515-510.png]]
... ... @@ -411,11 +411,14 @@
411 411  
412 412  == 4.3  Configure frequency ==
413 413  
456 +
414 414  We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
415 415  
459 +
416 416  [[image:1657094249818-468.png]]
417 417  
418 418  
463 +
419 419  In logread page, user can check the frequency actually used.
420 420  
421 421   [[image:1657094333704-207.png]]
... ... @@ -423,6 +423,7 @@
423 423  
424 424  == 4.4  Add a LoRaWAN End Device ==
425 425  
471 +
426 426  (((
427 427  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
428 428  )))
... ... @@ -433,8 +433,9 @@
433 433  
434 434  [[image:1652422794767-871.png]]
435 435  
482 +
436 436  (((
437 -(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
484 +(% style="color:blue" %)**Step 1**: (%%)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
438 438  
439 439  
440 440  )))
... ... @@ -449,12 +449,15 @@
449 449  
450 450  (((
451 451  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
499 +
500 +
452 452  )))
453 453  
454 454  [[image:1657094382177-591.png]]
455 455  
505 +
456 456  (((
457 -(% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
507 +(% style="color:red" %)**Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.**
458 458  
459 459  
460 460  )))
... ... @@ -465,6 +465,8 @@
465 465  
466 466  (((
467 467  Select **Add Application** to open the screen below.
518 +
519 +
468 468  )))
469 469  
470 470  [[image:1657094417175-831.png]]
... ... @@ -505,11 +505,15 @@
505 505  )))
506 506  
507 507  (((
508 -(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
560 +(% style="color:blue" %)**Step 2**:  (%%)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
561 +
562 +
509 509  )))
510 510  
511 511  (((
512 -(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
566 +(% style="color:red" %)**Note that it may take some time for the device data to appear in the TTN v3 display.**
567 +
568 +
513 513  )))
514 514  
515 515  [[image:1657094791060-639.png]]
... ... @@ -519,8 +519,10 @@
519 519  
520 520  == 5.1  Home ==
521 521  
578 +
522 522  Shows the system running status.
523 523  
581 +
524 524  [[image:1657094893942-726.png]]
525 525  
526 526  
... ... @@ -528,6 +528,7 @@
528 528  
529 529  === 5.2.1  LoRa ~-~-> LoRa ===
530 530  
589 +
531 531  (((
532 532  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
533 533  )))
... ... @@ -542,16 +542,21 @@
542 542  (((
543 543  
544 544  
604 +(((
545 545  After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
606 +
607 +
546 546  )))
609 +)))
547 547  
548 548  [[image:1657094930903-357.png]]
549 549  
550 -Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
613 +(% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
551 551  
552 552  
553 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
616 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
554 554  
618 +
555 555  The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
556 556  
557 557  * No internet connection.
... ... @@ -559,6 +559,8 @@
559 559  
560 560  (((
561 561  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
626 +
627 +
562 562  )))
563 563  
564 564  [[image:1657095412271-942.png]]
... ... @@ -568,10 +568,13 @@
568 568  
569 569  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
570 570  
571 -This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
572 572  
638 +This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc.
639 +
640 +
573 573  [[image:1652423628833-467.png||height="357" width="755"]]
574 574  
643 +
575 575  (% style="color:red" %)**Note:**
576 576  
577 577  ~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
... ... @@ -581,18 +581,37 @@
581 581  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
582 582  
583 583  
584 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
653 +=== 5.3.2  LoRaWAN ~-~-> LoRaWAN ~-~- Basic Station ===
585 585  
586 -[[image:1652428499323-384.png||height="275" width="723"]]
587 587  
656 +[[image:image-20230406172421-1.png]]
657 +
658 +
588 588  (((
589 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
660 +Please see this instruction to know more detail and a demo of how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
590 590  
662 +
663 +The basic station mode support **TTN/AWS/Chirpstack/ThingPark/Senet** Platform.
664 +
665 +Instruction:
666 +
667 + [[The Thing Network>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20TTN/#H3.A0GatewayRegistrationforBasicsStation]]      
668 +
669 + [[AWS-IoT LoRaWAN Core>>http://wiki.dragino.com/xwiki/bin/view/Main/AWS%20IoT%20Core%20for%20LoRaWAN/]]
670 +
671 + [[Chirpstack>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H3.A0GatewayRegistrationforBasicsStation]]
672 +
673 + ThingPark
674 +
675 + [[Senet>>http://wiki.dragino.com/xwiki/bin/view/Main/Connection%20to%20Senet/#H3.A0SemtechBasicStation]]
676 +
677 +
591 591  
592 592  )))
593 593  
594 594  === 5.3.3  LoRaWAN ~-~-> LORIOT ===
595 595  
683 +
596 596  (((
597 597  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
598 598  )))
... ... @@ -599,6 +599,8 @@
599 599  
600 600  (((
601 601  Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
690 +
691 +
602 602  )))
603 603  
604 604  [[image:1652428648903-878.png||height="266" width="731"]]
... ... @@ -606,9 +606,14 @@
606 606  
607 607  == 5.4  MQTT Settings ==
608 608  
699 +
700 +(((
609 609  If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
702 +)))
610 610  
704 +(((
611 611  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
706 +)))
612 612  
613 613  
614 614  [[image:1652428705046-212.png||height="417" width="733"]]
... ... @@ -618,22 +618,25 @@
618 618  
619 619  === 5.5.1  System ~-~-> System Overview ===
620 620  
716 +
621 621  Shows the system info:
622 622  
623 -[[image:1657155158184-134.png]]
624 624  
720 +[[image:image-20220826091810-6.png]]
625 625  
626 626  
627 627  === 5.5.2  System ~-~-> General ( login settings) ===
628 628  
725 +
629 629  [[image:1657155183982-792.png]]
630 630  
728 +
631 631  (((
632 -**__System Password:__**
730 +(% style="color:#037691" %)**__System Password:__**
633 633  )))
634 634  
635 635  (((
636 -There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
734 +There are two login for LPS8N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
637 637  )))
638 638  
639 639  (((
... ... @@ -641,52 +641,54 @@
641 641  )))
642 642  
643 643  (((
644 -**__Timezone:  __**Set device timezone.
742 +(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
645 645  )))
646 646  
647 647  (((
648 -**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
746 +(% style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
649 649  
650 -
651 651  
652 652  )))
653 653  
654 654  === 5.5.3  System ~-~-> Network ===
655 655  
753 +
656 656  [[image:1657155288223-566.png]]
657 657  
756 +
658 658  (((
659 -**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
758 +(% style="color:#037691" %)**__LAN Settings:    __**(%%)When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
660 660  )))
661 661  
662 662  (((
663 -__**WAN Settings:  **__Setting for LPS8N WAN port
762 +(% style="color:#037691" %)__**WAN Settings:  **__(%%)Setting for LPS8N WAN port
664 664  )))
665 665  
666 666  (((
667 -__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
766 +(% style="color:#037691" %)__**WiFi Settings:  **__** **(%%)Setting for LPS8N WiFi IP when use it as WiFi Client
668 668  
669 -
670 670  
671 671  )))
672 672  
673 673  === 5.5.4  System ~-~-> WiFi ===
674 674  
773 +
675 675  LPS8N WiFi Settings.
676 676  
776 +
677 677  [[image:1657155457089-430.png]]
678 678  
679 679  
680 -
681 681  === 5.5.5  System ~-~-> Cellular ===
682 682  
782 +
683 683  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
684 684  
685 685  
686 686  [[image:1657155507672-204.png]]
687 687  
688 -(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
689 689  
789 +(% style="color:red" %)**Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.**
690 690  
691 691  
692 692  === 5.5.6  System ~-~-> Network Status ===
... ... @@ -695,31 +695,43 @@
695 695  [[image:1657155554265-721.png]]
696 696  
697 697  
698 -
699 699  === 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
700 700  
701 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:(% style="display:none" %) 
702 702  
801 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
802 +
803 +
804 +[[image:image-20220707112053-4.png||height="451" width="995"]]
805 +
806 +[[image:image-20220707112053-5.png||height="453" width="1004"]]
807 +
808 +(% style="display:none" %)
809 +
703 703  (% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
704 704  
705 705  (% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
706 706  
707 -[[image:image-20220707092040-3.png||height="449" width="956"]]
814 +[[image:image-20220826091725-5.png||height="479" width="1004"]]
708 708  
709 709  
710 -Please see this document for detail:(% style="display:none" %)
817 +(((
818 +Please see this document for detail:  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
819 +)))
711 711  
712 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
821 +(% style="display:none" %) (%%)
713 713  
823 +(((
824 +R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Monitor & Remote Access Gateway.WebHome]]
714 714  
715 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
826 +
827 +)))
716 716  
717 717  [[image:1652429624400-864.png||height="432" width="716"]]
718 718  
719 719  
720 -
721 721  === 5.5.8  System ~-~-> Firmware Upgrade ===
722 722  
834 +
723 723  We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
724 724  
725 725  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -737,19 +737,33 @@
737 737  
738 738  (((
739 739  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
852 +
853 +
740 740  )))
741 741  
742 742  [[image:1657156052651-770.png]]
743 743  
744 -Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
745 745  
859 +(((
860 +Select the required image and click (% style="color:blue" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:blue" %)**Process Update**(%%) to upgrade.
861 +)))
746 746  
747 -(% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
748 748  
864 +(((
865 +(% style="color:red" %)**NOTE**: (%%)You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)**Preserve Settings**(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
866 +
867 +
868 +)))
869 +
870 +(((
749 749  The system will automatically boot into the new firmware after upgrade.
750 750  
873 +
874 +)))
875 +
751 751  [[image:1657156094153-520.png]]
752 752  
878 +
753 753  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
754 754  
755 755  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -762,12 +762,11 @@
762 762  
763 763  === 5.5.9  System ~-~-> Reboot/Reset ===
764 764  
891 +
765 765  [[image:1652430197132-330.png||height="256" width="724"]]
766 766  
767 767  (((
768 768  
769 -
770 -
771 771  )))
772 772  
773 773  === 5.5.10  System ~-~-> Package Maintain ===
... ... @@ -775,10 +775,10 @@
775 775  
776 776  [[image:1657156199070-491.png]]
777 777  
903 +
778 778  Place to show what package has installed and possible to upgrade packages.
779 779  
780 780  
781 -
782 782  == 5.6  LogRead ==
783 783  
784 784  === 5.6.1  LogRead ~-~-> LoRa Log ===
... ... @@ -786,55 +786,138 @@
786 786  
787 787  Show the frequency for LoRa Radio and traffics.
788 788  
914 +
789 789  [[image:1657156300781-933.png]]
790 790  
791 791  
792 -
793 793  === 5.6.2  LogRead ~-~-> System Log ===
794 794  
920 +
795 795  Show the system log
796 796  
923 +
797 797  [[image:1657156341198-226.png]]
798 798  
799 799  
800 -
801 801  = 6.  More features =
802 802  
803 803  == 6.1 Packet Filtering ==
804 804  
931 +
932 +(((
805 805  Drop unwanted packets.
934 +)))
806 806  
936 +(((
807 807  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
938 +)))
808 808  
809 809  
810 810  == 6.2 Remote Access ==
811 811  
943 +
944 +(((
812 812  Remote Access Devices for management.
946 +)))
813 813  
814 -Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/]]
948 +(((
949 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
950 +)))
815 815  
816 816  
817 817  == 6.3 How to decode ABP LoRaWAN node ==
818 818  
955 +
956 +(((
819 819  Decode ABP:
958 +)))
820 820  
960 +(((
821 821  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
962 +)))
822 822  
823 823  
824 824  == 6.4 How to set data to MQTT broker ==
825 825  
967 +
968 +(((
826 826  Only support ABP LoRaWAN End Node
970 +)))
827 827  
972 +(((
828 828  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
829 829  
830 830  
831 -== 6.5  More instructions ==
976 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
832 832  
978 +
979 +If the Chirpstack v3 Gateway-bridge is used, the corresponding gateway firmware must be used :
980 +
981 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge~~-~~-build-v5.4.1679487778-20230322-2024/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V3.14.6-Bridge--build-v5.4.1679487778-20230322-2024/]]
982 +
983 +Chirpstack v3 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0A0HowthegatewayconnectstoChirpstackv3viagateway-bridge]]
984 +
985 +
986 +If the Chirpstack v4 Gateway-bridge is used, the corresponding gateway firmware must be used :
987 +
988 +[[Chirpstack-gateway-bridge/Chirpstack-Bridge-V4~~-~~-build-v5.4.1670655072-20221210-1452/>>https://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Release/Chirpstack-gateway-bridge/Chirpstack-Bridge-V4--build-v5.4.1670655072-20221210-1452/]]
989 +
990 +Chirpstack v4 via gateway-bridge Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.A0HowthegatewayconnectstoChirpstackv4viagateway-bridge]]
991 +
992 +
993 +)))
994 +
995 +(% style="color:red" %)**Note**(%%): Different chirpstack versions use different gateway-bridge configurations.
996 +
997 +After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
998 +
999 +
1000 +== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1001 +
1002 +
1003 +USB card reader plugged into the USB port of the gateway
1004 +
1005 +
1006 +Access the gateway Linux Command Line
1007 +
1008 +
1009 +Check the USB device
1010 +
1011 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425165308-2.png?rev=1.1||alt="image-20230425165308-2.png" height="274" width="718"]]
1012 +
1013 +
1014 +**Mount the USB device**
1015 +
1016 +(% class="box infomessage" %)
1017 +(((
1018 +**mount /dev/sda1 /mnt/**
1019 +)))
1020 +
1021 +(% class="wikigeneratedid" %)
1022 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425174131-4.png?rev=1.1||alt="image-20230425174131-4.png"]]
1023 +
1024 +
1025 +(% class="wikigeneratedid" %)
1026 +**Set up the automatic mount on boot**
1027 +
1028 +(% class="box infomessage" %)
1029 +(((
1030 +**sed -i '3cmount \/dev\/sda1 \/mnt\/' /etc/rc.local **
1031 +)))
1032 +
1033 +(% class="wikigeneratedid" %)
1034 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1035 +
1036 +
1037 +== 6.7  More instructions ==
1038 +
1039 +
833 833  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
834 834  
835 835  
836 -== 6.6  Auto-Provision ==
1043 +== 6.8  Auto-Provision ==
837 837  
1045 +
838 838  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
839 839  
840 840  [[image:image-20220707092040-1.png||height="451" width="995"]]
... ... @@ -841,16 +841,18 @@
841 841  
842 842  [[image:image-20220707092040-2.png||height="452" width="1002"]]
843 843  
844 -[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
1052 +[[image:image-20220826091546-4.png]](% style="display:none" %)
845 845  
846 -Please see this document for detail:
847 847  
848 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
1055 +(((
1056 +Please see this document for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
1057 +)))
849 849  
850 850  (% style="display:none" %) (%%)
851 851  
852 852  = 7.  (% style="display:none" %) (%%)Linux System =
853 853  
1063 +
854 854  The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
855 855  
856 856  (% style="display:none" %) (%%)
... ... @@ -857,6 +857,7 @@
857 857  
858 858  == 7.1  SSH Access for Linux console ==
859 859  
1070 +
860 860  User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
861 861  
862 862  IP address:  IP address of LPS8N
... ... @@ -872,15 +872,16 @@
872 872  
873 873  [[image:1657158198733-338.png]]
874 874  
875 -The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
876 876  
1087 +The “** (% style="background-color:yellow" %)logread -f(%%)**(% style="background-color:yellow" %)” (%%)command can be used to debug how system runs.
877 877  
1089 +
878 878  [[image:1657158190234-805.png]]
879 879  
880 880  
881 -
882 882  == 7.2  Edit and Transfer files ==
883 883  
1095 +
884 884  (((
885 885  The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
886 886  )))
... ... @@ -900,9 +900,9 @@
900 900  [[image:1652431650755-450.png]]
901 901  
902 902  
903 -
904 904  == 7.3  File System ==
905 905  
1117 +
906 906  (((
907 907  The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
908 908  )))
... ... @@ -918,6 +918,7 @@
918 918  
919 919  == 7.4  Package maintenance system ==
920 920  
1133 +
921 921  LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
922 922  
923 923  (((
... ... @@ -970,12 +970,12 @@
970 970  (((
971 971  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
972 972  
973 -
974 974  
975 975  )))
976 976  
977 977  = 8.  Upgrade Linux Firmware =
978 978  
1191 +
979 979  We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
980 980  
981 981  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -987,41 +987,67 @@
987 987  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
988 988  
989 989  
1203 +(((
990 990  The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
1205 +)))
991 991  
992 992  
993 993  == 8.1 Upgrade via Web UI ==
994 994  
1210 +
1211 +(((
995 995  Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1213 +)))
996 996  
1215 +(((
997 997  Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
1217 +)))
998 998  
999 999  
1000 -(% style="color:red" %)**NOTE**(%%): You normally need to **//uncheck//** the //**Preserve Settings**// checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1220 +(((
1221 +(% style="color:red" %)**NOTE**(%%): You normally need to (% style="color:blue" %)**//uncheck//**(%%) the (% style="color:blue" %)//**Preserve Settings**//(%%) checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1222 +)))
1001 1001  
1002 1002  
1225 +(((
1003 1003  The system will automatically boot into the new firmware after upgrade.
1004 1004  
1228 +
1229 +)))
1230 +
1005 1005  [[image:1657158986600-386.png]]
1006 1006  
1007 1007  
1008 1008  == 8.2 Upgrade via Linux console ==
1009 1009  
1236 +
1237 +(((
1010 1010  SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1239 +)))
1011 1011  
1241 +(((
1012 1012  (% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1243 +)))
1013 1013  
1014 1014  
1246 +(((
1015 1015  (% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1248 +)))
1016 1016  
1017 1017  
1251 += 9.  OTA System Update =
1018 1018  
1019 -= 9. FAQ =
1020 1020  
1021 -== 9.1 How can I configure for a customized frequency band? ==
1254 +LPS8N supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
1022 1022  
1256 +
1257 += 10.  FAQ =
1258 +
1259 +== 10.1  How can I configure for a customized frequency band? ==
1260 +
1261 +
1023 1023  (((
1024 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1263 +See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1025 1025  )))
1026 1026  
1027 1027  (((
... ... @@ -1028,15 +1028,11 @@
1028 1028  
1029 1029  )))
1030 1030  
1031 -== 9.2 Can I connect DLOS8N to LORIOT? ==
1270 +== 10.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1032 1032  
1033 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
1034 1034  
1035 -
1036 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
1037 -
1038 1038  (((
1039 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1274 +Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
1040 1040  )))
1041 1041  
1042 1042  (((
... ... @@ -1043,16 +1043,28 @@
1043 1043  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
1044 1044  )))
1045 1045  
1281 +(((
1282 +
1283 +)))
1046 1046  
1047 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1285 +== 10.3  Can I use 868Mhz version for 915Mhz bands? ==
1048 1048  
1287 +
1049 1049  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
1050 1050  
1051 1051  
1052 -= 10. Trouble Shooting =
1291 +== 10.4 DIN Rail Mounting Reference. ==
1053 1053  
1054 -== 10.1 I get kernel error when install new package, how to fix? ==
1293 +[[image:image-20240318095136-1.jpeg||height="785" width="785"]]
1055 1055  
1295 +[[image:image-20240318095410-2.png||height="179" width="402"]]
1296 +
1297 +
1298 += 11.  Trouble Shooting =
1299 +
1300 +== 11.1  I get kernel error when install new package, how to fix? ==
1301 +
1302 +
1056 1056  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
1057 1057  
1058 1058  (% style="background-color:yellow" %)root@dragino-16c538:~~# opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk
... ... @@ -1074,10 +1074,11 @@
1074 1074  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
1075 1075  
1076 1076  
1077 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
1324 +== 11.2  How to recover the LPS8N if the firmware crashes ==
1078 1078  
1326 +
1079 1079  (((
1080 -Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1328 +Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
1081 1081  )))
1082 1082  
1083 1083  (((
... ... @@ -1084,60 +1084,78 @@
1084 1084  
1085 1085  )))
1086 1086  
1087 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1335 +== 11.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
1088 1088  
1089 -[[image:1652435238615-272.png||height="247" width="727"]]
1090 1090  
1338 +[[image:image-20231116112906-1.png]]
1339 +
1340 +
1091 1091  (((
1092 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1342 +The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1093 1093  )))
1094 1094  
1095 -(% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
1345 +(% style="color:red" %)**Note: fallback IP can be disabled in the WAN and DHCP page.**
1096 1096  
1097 1097  
1098 -Steps to connect via fall back IP:
1348 +**Steps to connect via fall back IP:**
1099 1099  
1100 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1350 +~1. Connect PC's Ethernet port to LPS8N's WAN port
1101 1101  
1102 -2. Configure PC’s Ethernet port has
1352 +2. Configure PC's Ethernet port has
1103 1103   IP: 172.31.255.253 and
1104 1104   Netmask: 255.255.255.252
1105 1105  
1356 +
1106 1106  As below photo:
1107 1107  
1108 1108  [[image:1652435256286-879.png]]
1109 1109  
1110 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1111 1111  
1362 +3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1363 +
1112 1112  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1113 1113  
1114 1114  
1115 -= 11. Order Info =
1367 +== 11.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1116 1116  
1117 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1118 1118  
1119 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1370 +(((
1371 +This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1372 +)))
1120 1120  
1121 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1122 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1374 +(((
1375 +In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1376 +)))
1123 1123  
1124 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1125 1125  
1126 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1127 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1128 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1129 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1379 += 12.  Order Info =
1130 1130  
1381 +
1382 +**PART: (% style="color:blue" %)LPS8N-XXX-YYY: (%%)**
1383 +
1384 +(% style="color:blue" %) **XXX:**(%%)** Frequency Band**
1385 +
1386 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1387 +* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1388 +
1389 +(% style="color:blue" %) **YYY:**(%%)** 4G Cellular Option**
1390 +
1391 +* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1392 +* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America:Verizon, AT&T(FirstNet), U.S.Cellular; Canada:Telus
1393 +* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1394 +* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1395 +
1131 1131  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1132 1132  
1133 1133  
1134 -= 12. Packing Info =
1399 += 13.  Packing Info =
1135 1135  
1401 +
1136 1136  (((
1137 1137  **Package Includes**:
1138 1138  )))
1139 1139  
1140 -* DLOS8N LoRaWAN Gateway x 1
1406 +* LPS8N LoRaWAN Gateway x 1
1141 1141  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1142 1142  * Packaging with environmental protection paper box
1143 1143  
... ... @@ -1150,9 +1150,12 @@
1150 1150  * Package Size: 14.5 x 13.5 x 6 cm
1151 1151  * Weight: 300g
1152 1152  
1153 -= 13. Support =
1419 += 14.  Support =
1154 1154  
1421 +
1155 1155  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1156 1156  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1157 1157  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1158 1158  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1426 +
1427 +
image-20220707112053-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +106.4 KB
Content
image-20220707112053-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.1 KB
Content
image-20220826090251-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +146.0 KB
Content
image-20220826090430-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20220826090449-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20220826091546-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +135.8 KB
Content
image-20220826091725-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +135.8 KB
Content
image-20220826091810-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +70.6 KB
Content
image-20220826094525-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +44.5 KB
Content
image-20220830153228-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.0 KB
Content
image-20230406172421-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +85.6 KB
Content
image-20231116112906-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +76.0 KB
Content
image-20240318095136-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +547.3 KB
Content
image-20240318095410-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +80.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0