Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 139.1 >
edited by Xiaoling
on 2022/07/07 08:58
To version < 156.7 >
edited by Xiaoling
on 2022/07/07 10:12
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -105,6 +105,7 @@
105 105  
106 106  
107 107  
108 +
108 108  == 1.3  Features ==
109 109  
110 110  * Open Source OpenWrt system
... ... @@ -123,6 +123,7 @@
123 123  
124 124  
125 125  
127 +
126 126  == 1.4  Hardware System Structure ==
127 127  
128 128  [[image:1657079015096-949.png]]
... ... @@ -147,8 +147,6 @@
147 147  
148 148  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
149 149  
150 -
151 -
152 152  = 2.  Access and Configure LPS8N =
153 153  
154 154  (((
... ... @@ -237,8 +237,6 @@
237 237  * **WiFi Client Mode**
238 238  * **WiFi AP Mode**
239 239  
240 -
241 -
242 242  == 3.2  Use WAN port to access Internet ==
243 243  
244 244  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
... ... @@ -363,8 +363,6 @@
363 363  * Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 364  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 365  
366 -
367 -
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 370  [[image:1657091941182-367.png]]
... ... @@ -601,7 +601,7 @@
601 601  
602 602  )))
603 603  
604 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
600 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
605 605  
606 606  (((
607 607  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -614,9 +614,9 @@
614 614  [[image:1652428648903-878.png||height="266" width="731"]]
615 615  
616 616  
617 -== 5.4 MQTT Settings ==
613 +== 5.4  MQTT Settings ==
618 618  
619 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
615 +If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
620 620  
621 621  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
622 622  
... ... @@ -624,9 +624,9 @@
624 624  [[image:1652428705046-212.png||height="417" width="733"]]
625 625  
626 626  
627 -== 5.5 System ==
623 +== 5.5  System ==
628 628  
629 -=== 5.5.1 System ~-~-> System Overview ===
625 +=== 5.5.1  System ~-~-> System Overview ===
630 630  
631 631  Shows the system info:
632 632  
... ... @@ -634,7 +634,7 @@
634 634  
635 635  
636 636  
637 -=== 5.5.2 System ~-~-> General ( login settings) ===
633 +=== 5.5.2  System ~-~-> General ( login settings) ===
638 638  
639 639  [[image:1657155183982-792.png]]
640 640  
... ... @@ -643,7 +643,7 @@
643 643  )))
644 644  
645 645  (((
646 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
642 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
647 647  )))
648 648  
649 649  (((
... ... @@ -661,76 +661,86 @@
661 661  
662 662  )))
663 663  
664 -=== 5.5.3 System ~-~-> Network ===
660 +=== 5.5.3  System ~-~-> Network ===
665 665  
666 -[[image:1652429149053-824.png||height="467" width="725"]]
662 +[[image:1657155288223-566.png]]
667 667  
668 668  (((
669 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
665 +**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
670 670  )))
671 671  
672 672  (((
673 -__**WAN Settings:**__Setting for DLOS8N WAN port
669 +__**WAN Settings:  **__Setting for LPS8N WAN port
674 674  )))
675 675  
676 676  (((
677 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
673 +__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
678 678  
675 +
679 679  
680 680  )))
681 681  
682 -=== 5.5.4 System ~-~-> WiFi ===
679 +=== 5.5.4  System ~-~-> WiFi ===
683 683  
684 -DLOS8N WiFi Settings.
681 +LPS8N WiFi Settings.
685 685  
686 -[[image:1652429430767-921.png||height="367" width="723"]]
683 +[[image:1657155457089-430.png]]
687 687  
688 -=== 5.5.5 System ~-~-> Cellular ===
689 689  
686 +
687 +=== 5.5.5  System ~-~-> Cellular ===
688 +
690 690  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
691 691  
692 -[[image:1652429309615-825.png||height="320" width="732"]]
693 693  
694 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
692 +[[image:1657155507672-204.png]]
695 695  
696 -=== 5.5.6 System ~-~-> Network Status ===
694 +(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
697 697  
698 -[[image:1652429486609-208.png||height="415" width="728"]]
699 699  
700 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
701 701  
702 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
698 +=== 5.5.6  System ~-~-> Network Status ===
703 703  
704 -[[image:1652429518191-846.png||height="332" width="733"]]
705 705  
706 -[[image:1652429527544-247.png||height="327" width="724"]]
701 +[[image:1657155554265-721.png]]
707 707  
708 -[[image:1652429537849-154.png||height="339" width="722"]]
709 709  
710 -Please see this document for detail:
711 711  
712 -(((
713 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
714 -)))
705 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
715 715  
707 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:(% style="display:none" %) 
716 716  
709 +(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
710 +
711 +(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
712 +
713 +[[image:image-20220707092040-3.png||height="449" width="956"]]
714 +
715 +
716 +Please see this document for detail:(% style="display:none" %)
717 +
718 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
719 +
720 +
717 717  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
718 718  
719 719  [[image:1652429624400-864.png||height="432" width="716"]]
720 720  
721 721  
722 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
723 723  
724 -We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
727 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
725 725  
729 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
730 +
726 726  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
727 727  
728 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
733 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
729 729  
730 730  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
731 731  
732 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
737 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
733 733  
739 +
734 734  (((
735 735  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
736 736  )))
... ... @@ -739,15 +739,16 @@
739 739  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
740 740  )))
741 741  
742 -[[image:1652429711145-862.png||height="270" width="737"]]
748 +[[image:1657156052651-770.png]]
743 743  
744 744  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
745 745  
752 +
746 746  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
747 747  
748 748  The system will automatically boot into the new firmware after upgrade.
749 749  
750 -[[image:1652429962190-224.png||height="358" width="729"]]
757 +[[image:1657156094153-520.png]]
751 751  
752 752  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
753 753  
... ... @@ -755,67 +755,111 @@
755 755  
756 756  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
757 757  
765 +
758 758  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
759 759  
760 -=== 5.5.9 System ~-~-> Reboot/Reset ===
761 761  
769 +=== 5.5.9  System ~-~-> Reboot/Reset ===
770 +
762 762  [[image:1652430197132-330.png||height="256" width="724"]]
763 763  
764 764  (((
765 765  
775 +
776 +
766 766  )))
767 767  
768 -=== 5.5.10 System ~-~-> Package Maintain ===
779 +=== 5.5.10  System ~-~-> Package Maintain ===
769 769  
770 -[[image:1652430243826-126.png||height="289" width="723"]]
771 771  
782 +[[image:1657156199070-491.png]]
783 +
772 772  Place to show what package has installed and possible to upgrade packages.
773 773  
774 -== 5.6 LogRead ==
775 775  
776 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
777 777  
788 +== 5.6  LogRead ==
778 778  
790 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
791 +
792 +
779 779  Show the frequency for LoRa Radio and traffics.
780 780  
781 -[[image:image-20220615204306-1.png||height="575" width="733"]]
795 +[[image:1657156300781-933.png]]
782 782  
783 783  
784 -Show the IoT Server Connection State and FWD State
785 785  
786 -[[image:image-20220616083933-1.png||height="556" width="729"]]
799 +=== 5.6.2  LogRead ~-~-> System Log ===
787 787  
788 -DLOS8 can view GPS location in the Logread FWD State
801 +Show the system log
789 789  
803 +[[image:1657156341198-226.png]]
790 790  
791 -Show the Error logs, RxTxJson lorawan packages, and PULL State
792 792  
793 -[[image:image-20220615205416-6.png||height="442" width="884"]]
794 794  
807 += 6.  More features =
795 795  
796 -=== 5.6.2 LogRead ~-~-> System Log ===
809 +== 6.1 Packet Filtering ==
797 797  
798 -Show the system log
811 +Drop unwanted packets.
799 799  
800 -[[image:1652430369760-511.png||height="373" width="730"]]
813 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
801 801  
802 -= 6. More features =
803 803  
804 -== 6.1 More instructions ==
816 +== 6.2 Remote Access ==
805 805  
818 +Remote Access Devices for management.
819 +
820 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/]]
821 +
822 +
823 +== 6.3 How to decode ABP LoRaWAN node ==
824 +
825 +Decode ABP:
826 +
827 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
828 +
829 +
830 +== 6.4 How to set data to MQTT broker ==
831 +
832 +Only support ABP LoRaWAN End Node
833 +
834 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
835 +
836 +
837 +== 6.5  More instructions ==
838 +
806 806  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
807 807  
808 808  
809 -= 7. Linux System =
842 +== 6.6  Auto-Provision ==
810 810  
811 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
844 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
812 812  
813 -== 7.1 SSH Access for Linux console ==
846 +[[image:image-20220707092040-1.png||height="451" width="995"]]
814 814  
815 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
848 +[[image:image-20220707092040-2.png||height="452" width="1002"]]
816 816  
817 -IP address:  IP address of DLOS8N
850 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
818 818  
852 +Please see this document for detail:
853 +
854 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
855 +
856 +(% style="display:none" %) (%%)
857 +
858 += 7.  (% style="display:none" %) (%%)Linux System =
859 +
860 +The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
861 +
862 +(% style="display:none" %) (%%)
863 +
864 +== 7.1  SSH Access for Linux console ==
865 +
866 +User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
867 +
868 +IP address:  IP address of LPS8N
869 +
819 819  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
820 820  
821 821  User Name:      (% style="color:green" %)**root**
... ... @@ -824,17 +824,20 @@
824 824  
825 825  After logging in, you will be in the Linux console and can enter commands as shown below.
826 826  
827 -[[image:1652431588565-830.png]]
828 828  
879 +[[image:1657158198733-338.png]]
880 +
829 829  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
830 830  
831 -[[image:1652431609193-637.png||height="214" width="732"]]
832 832  
884 +[[image:1657158190234-805.png]]
833 833  
834 -== 7.2 Edit and Transfer files ==
835 835  
887 +
888 +== 7.2  Edit and Transfer files ==
889 +
836 836  (((
837 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
891 +The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
838 838  )))
839 839  
840 840  (((
... ... @@ -842,7 +842,7 @@
842 842  )))
843 843  
844 844  (((
845 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
899 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LPS8N, or edit the files directly in the windows.
846 846  )))
847 847  
848 848  (((
... ... @@ -852,14 +852,15 @@
852 852  [[image:1652431650755-450.png]]
853 853  
854 854  
855 -== 7.3 File System ==
856 856  
910 +== 7.3  File System ==
911 +
857 857  (((
858 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
913 +The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
859 859  )))
860 860  
861 861  (((
862 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
917 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the LPS8N flash.
863 863  )))
864 864  
865 865  (((
... ... @@ -867,9 +867,9 @@
867 867  )))
868 868  
869 869  
870 -== 7.4 Package maintenance system ==
925 +== 7.4  Package maintenance system ==
871 871  
872 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
927 +LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
873 873  
874 874  (((
875 875  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
... ... @@ -880,11 +880,11 @@
880 880  )))
881 881  
882 882  (((
883 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
938 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**             (% style="color:black" %)~/~/ to get the latest packages list
884 884  )))
885 885  
886 886  (((
887 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
942 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
888 888  )))
889 889  
890 890  (((
... ... @@ -920,15 +920,57 @@
920 920  
921 921  (((
922 922  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
978 +
979 +
980 +
923 923  )))
924 924  
925 -= 8. Upgrade Linux Firmware =
983 += 8.  Upgrade Linux Firmware =
926 926  
985 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
927 927  
928 -= 9. FAQ =
987 +* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
929 929  
930 -== 9.1 How can I configure for a customized frequency band? ==
989 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
931 931  
991 +* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
992 +
993 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
994 +
995 +
996 +The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
997 +
998 +
999 +== 8.1 Upgrade via Web UI ==
1000 +
1001 +Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
1002 +
1003 +Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
1004 +
1005 +
1006 +(% style="color:red" %)**NOTE**(%%): You normally need to **//uncheck//** the //**Preserve Settings**// checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1007 +
1008 +
1009 +The system will automatically boot into the new firmware after upgrade.
1010 +
1011 +[[image:1657158986600-386.png]]
1012 +
1013 +
1014 +== 8.2 Upgrade via Linux console ==
1015 +
1016 +SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1017 +
1018 +(% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1019 +
1020 +
1021 +(% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1022 +
1023 +
1024 +
1025 += 9.  FAQ =
1026 +
1027 +== 9.1  How can I configure for a customized frequency band? ==
1028 +
932 932  (((
933 933  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
934 934  )))
... ... @@ -937,15 +937,11 @@
937 937  
938 938  )))
939 939  
940 -== 9.2 Can I connect DLOS8N to LORIOT? ==
1037 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
941 941  
942 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
943 943  
944 -
945 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
946 -
947 947  (((
948 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1041 +Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
949 949  )))
950 950  
951 951  (((
... ... @@ -952,15 +952,18 @@
952 952  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
953 953  )))
954 954  
1048 +(((
1049 +
1050 +)))
955 955  
956 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1052 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
957 957  
958 958  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
959 959  
960 960  
961 -= 10. Trouble Shooting =
1057 += 10.  Trouble Shooting =
962 962  
963 -== 10.1 I get kernel error when install new package, how to fix? ==
1059 +== 10.1  I get kernel error when install new package, how to fix? ==
964 964  
965 965  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
966 966  
... ... @@ -983,7 +983,7 @@
983 983  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
984 984  
985 985  
986 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
1082 +== 10.2  How to recover the LPS8N if the firmware crashes ==
987 987  
988 988  (((
989 989  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
... ... @@ -993,12 +993,13 @@
993 993  
994 994  )))
995 995  
996 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1092 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
997 997  
998 -[[image:1652435238615-272.png||height="247" width="727"]]
1094 +[[image:1657159323292-776.png]]
999 999  
1096 +
1000 1000  (((
1001 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1098 +The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1002 1002  )))
1003 1003  
1004 1004  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -1006,9 +1006,9 @@
1006 1006  
1007 1007  Steps to connect via fall back IP:
1008 1008  
1009 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1106 +~1. Connect PC's Ethernet port to LG01's WAN port
1010 1010  
1011 -2. Configure PC’s Ethernet port has
1108 +2. Configure PC's Ethernet port has
1012 1012   IP: 172.31.255.253 and
1013 1013   Netmask: 255.255.255.252
1014 1014  
... ... @@ -1016,26 +1016,41 @@
1016 1016  
1017 1017  [[image:1652435256286-879.png]]
1018 1018  
1019 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1116 +3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1020 1020  
1021 1021  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1022 1022  
1023 1023  
1024 -= 11. Order Info =
1121 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1025 1025  
1026 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1123 +(((
1124 +This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1125 +)))
1027 1027  
1127 +(((
1128 +In the old version, user can use the [[fall back ip method >>path:#_I_configured_LPS8]]to access and configure the device.
1129 +)))
1130 +
1131 +
1132 += 11.  Order Info =
1133 +
1134 +
1135 +(% style="color:#4f81bd" %)**//PART: LPS8N-XXX-YYY//: **
1136 +
1137 +
1028 1028  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1029 1029  
1030 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1031 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1140 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1141 +* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1032 1032  
1143 +
1144 +
1033 1033  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1034 1034  
1035 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1036 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1037 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1038 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1147 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1148 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1149 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1150 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1039 1039  
1040 1040  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1041 1041  
... ... @@ -1059,6 +1059,10 @@
1059 1059  * Package Size: 14.5 x 13.5 x 6 cm
1060 1060  * Weight: 300g
1061 1061  
1174 +
1175 +
1176 +
1177 +
1062 1062  = 13. Support =
1063 1063  
1064 1064  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657155554265-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
1657158986600-386.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657159323292-776.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.5 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +142.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0