Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 136.2 >
edited by Xiaoling
on 2022/07/07 08:53
To version < 98.1 >
edited by Xiaoling
on 2022/07/06 11:55
>
Change comment: Uploaded new attachment "image-20220706115518-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -60,6 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +
64 +
63 63  (% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
... ... @@ -70,6 +70,8 @@
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
75 +
76 +
73 73  (% style="color:#037691" %)**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
... ... @@ -83,6 +83,8 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
90 +
91 +
86 86  (% style="color:#037691" %)**LoRa Spec:**
87 87  
88 88  * Up to -140 dBm sensitivity
... ... @@ -94,6 +94,8 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
103 +
104 +
97 97  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
98 98  
99 99  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -105,8 +105,10 @@
105 105  
106 106  
107 107  
116 +
108 108  == 1.3  Features ==
109 109  
119 +
110 110  * Open Source OpenWrt system
111 111  * Managed by Web GUI, SSH via WAN or WiFi
112 112  * Remote access with Reverse-SSH or remote.it
... ... @@ -123,6 +123,7 @@
123 123  
124 124  
125 125  
136 +
126 126  == 1.4  Hardware System Structure ==
127 127  
128 128  [[image:1657079015096-949.png]]
... ... @@ -135,78 +135,81 @@
135 135  
136 136  == 1.6  LED Indicators ==
137 137  
149 +[[image:1652411720670-489.png]]
138 138  
139 -LPS8N has totally four LEDs, They are:
140 140  
141 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
142 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
143 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
144 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
145 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
146 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
152 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
147 147  
148 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
154 +(((
155 +(((
156 +* (((
157 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
158 +)))
159 +)))
149 149  
161 +* (((
162 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
163 +)))
164 +* (((
165 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
150 150  
151 151  
152 -= 2.  Access and Configure LPS8N =
153 153  
154 -(((
155 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
169 +
156 156  )))
171 +)))
157 157  
173 +== 1.7 WiFi Direction ==
158 158  
159 -== 2.1  Find IP address of LPS8N ==
175 +DLOS8N use directional WiFi Antenna. The best direction is as below:
160 160  
161 -=== 2.1.1  Connect via WiFi ===
177 +[[image:1652412859663-161.png||height="341" width="333"]]
162 162  
163 -[[image:1657085974260-168.png]]
179 += 2. Access and Configure DLOS8N =
164 164  
181 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
165 165  
166 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
183 +== 2.1 Find IP address of DLOS8N ==
167 167  
185 +=== 2.1.1 Connect via WiFi ===
186 +
187 +[[image:1652412985720-934.png]]
188 +
189 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
190 +
168 168  [[image:1652413127647-377.png]]
169 169  
193 +(% style="background-color:#ffffcc" %)dragino+dragino
170 170  
171 171  (((
172 172  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
173 -
174 -
175 -
176 176  )))
177 177  
178 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
199 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
179 179  
180 -[[image:1657086105922-299.png]]
201 +[[image:1652414114583-532.png]]
181 181  
182 182  
183 183  (((
184 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
185 -
186 -
187 -
205 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
188 188  )))
189 189  
190 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
208 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
191 191  
192 -[[image:1657086192720-649.png]]
210 +[[image:1652414137639-956.png]]
193 193  
194 194  
195 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
213 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
196 196  
215 +=== 2.1.4 Connect via Ethernet with fall back ip ===
197 197  
217 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
198 198  
199 -=== 2.1.4  Connect via Ethernet with fall back ip ===
219 +== 2.2 Access Configure Web UI ==
200 200  
201 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
202 -
203 -
204 -
205 -== 2.2  Access Configure Web UI ==
206 -
207 207  **Web Interface**
208 208  
209 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
223 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
210 210  
211 211  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
212 212  
... ... @@ -215,7 +215,7 @@
215 215  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
216 216  
217 217  
218 -You will see the login interface of LPS8N as shown below.
232 +You will see the login interface of DLOS8N as shown below.
219 219  
220 220  The account details for Web Login are:
221 221  
... ... @@ -225,67 +225,50 @@
225 225  
226 226  [[image:1652414287022-223.png]]
227 227  
242 += 3. Typical Network Setup =
228 228  
244 +== 3.1 Overview ==
229 229  
230 -= 3.  Typical Network Setup =
246 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
231 231  
232 -== 3.1  Overview ==
233 -
234 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
235 -
236 236  * **WAN Port Internet Mode**
237 237  * **WiFi Client Mode**
238 238  * **WiFi AP Mode**
251 +* **Cellular Mode**
239 239  
253 +== 3.2 Use WAN port to access Internet ==
240 240  
255 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
241 241  
242 -== 3.2  Use WAN port to access Internet ==
257 +[[image:1652420169255-959.png]]
243 243  
244 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
259 +== 3.3 Access the Internet as a WiFi Client ==
245 245  
246 -
247 -[[image:1657088560833-398.png]]
248 -
249 -
250 -== 3.3  Access the Internet as a WiFi Client ==
251 -
252 252  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
253 253  
254 254  (((
255 255  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
256 -
257 -[[image:1657088818095-182.png]]
258 258  )))
259 259  
267 +[[image:1652420327792-211.png]]
260 260  
261 261  (((
262 262  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
263 -
264 -
265 265  )))
266 266  
267 -== 3.4  Use built-in 4G modem for internet access ==
273 +== 3.4 Access the Internet via Cellular ==
268 268  
269 -(((
270 -(((
271 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
272 -)))
275 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
273 273  
274 -
275 275  (((
276 -First, install the Micro SIM card as below direction
278 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
277 277  )))
278 278  
279 -(((
280 -Second, Power off/ ON LPS8N to let it detect the SIM card.
281 -)))
282 -)))
281 +[[image:1652420606018-181.png]]
283 283  
284 284  
285 -[[image:1657090855037-497.png]]
286 -
287 287  (((
288 -
285 +[[image:1652420718132-929.png||height="427" width="727"]]
289 289  )))
290 290  
291 291  (((
... ... @@ -297,90 +297,78 @@
297 297  )))
298 298  
299 299  (((
300 -[[image:1657090932270-444.png]]
297 +[[image:1652421032117-341.png||height="329" width="752"]]
301 301  )))
302 302  
300 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
303 303  
304 -== 3.5  Check Internet connection ==
302 +== 3.5 Check Internet connection ==
305 305  
306 306  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
307 307  
308 308  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
309 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
310 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
307 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
308 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
311 311  
312 -[[image:1657091099235-452.png]]
310 +[[image:1652421351382-793.png||height="339" width="765"]]
313 313  
312 += 4. Example: Configure as a LoRaWAN gateway =
314 314  
314 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
315 315  
316 -= 4.  Example: Configure as a LoRaWAN gateway =
317 -
318 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
319 -
320 320  (((
321 -[[image:1657091257648-882.png]]
317 +[[image:image-20220513140429-1.png||height="565" width="824"]]
322 322  )))
323 323  
324 -(((
325 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 -)))
320 +This chapter describes how to use the DLOS8Nto work with
327 327  
322 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
328 328  
324 +== 4.1 Create a gateway in TTN V3 Server ==
329 329  
330 -== 4.1  Create a gateway in TTN V3 Server ==
331 -
332 332  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
333 333  
334 334  (((
335 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
329 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
336 336  )))
337 337  
338 338  (((
339 -[[image:1657091583941-544.png]]
333 +[[image:1652421929753-168.png||height="403" width="739"]]
340 340  )))
341 341  
342 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
336 +The example gateway id is: **a840411e96744154**
343 343  
344 -
345 345  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
346 346  
347 347  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
348 348  
349 -[[image:1657091739530-531.png]]
342 +[[image:1652422127479-258.png||height="346" width="738"]]
350 350  
351 -
352 352  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
353 353  
354 354  (((
355 -[[image:1657091719947-297.png]]
347 +[[image:1652422142236-792.png||height="356" width="737"]]
356 356  )))
357 357  
358 358  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
359 359  
352 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
353 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
354 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
355 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
360 360  
361 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
362 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
363 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 -
366 -
367 -
368 368  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
369 369  
370 -[[image:1657091941182-367.png]]
359 +[[image:1652422440891-514.png||height="360" width="747"]]
371 371  
372 372  Click the Gateway icon and then click Add gateway.
373 373  
374 -
375 375  Open the following page:
376 376  
365 + [[image:1652422470352-518.png||height="391" width="716"]]
377 377  
378 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
367 +[[image:1652422479876-297.png||height="398" width="729"]]
379 379  
380 -
381 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
382 -
383 -
384 384  (((
385 385  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
386 386  )))
... ... @@ -387,17 +387,16 @@
387 387  
388 388  After creating the gateway, you can see the gateway info, as below.
389 389  
390 -[[image:1657094130908-567.png]](% style="display:none" %)
375 +[[image:1652422509034-682.png||height="299" width="739"]]
391 391  
377 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
392 392  
393 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
394 -
395 395  (((
396 -You can now configure the LPS8N to let it connect to TTN network V3.
380 +You can now configure the DLOS8N to let it connect to TTN network V3.
397 397  )))
398 398  
399 399  (((
400 -Make sure your LPS8N has a working Internet Connection first.
384 +Make sure your DLOS8N has a working Internet Connection first.
401 401  )))
402 402  
403 403  (((
... ... @@ -404,35 +404,31 @@
404 404  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
405 405  )))
406 406  
407 -[[image:1657094183213-301.png]]
391 +[[image:1652422624783-580.png||height="327" width="729"]]
408 408  
409 409  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
410 410  
411 -
412 412  In the home page, we can see the LoRaWAN connection is ready now.
413 413  
414 -[[image:1657094202420-798.png]]
397 +[[image:1652422685063-596.png||height="327" width="729"]]
415 415  
416 -
417 417  In TTN v3 portal, we can also see the gateway is connected.
418 418  
419 -[[image:1657094221515-510.png]]
401 +[[image:1652422703020-955.png||height="343" width="730"]]
420 420  
403 +== 4.3 Configure frequency ==
421 421  
422 -== 4.3  Configure frequency ==
405 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
423 423  
424 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
407 +[[image:1652422737399-529.png||height="362" width="737"]]
425 425  
426 -[[image:1657094249818-468.png]]
427 427  
428 -
429 429  In logread page, user can check the frequency actually used.
430 430  
431 - [[image:1657094333704-207.png]]
412 + [[image:1652422763536-750.png||height="514" width="730"]]
432 432  
414 +== 4.4 Add a LoRaWAN End Device ==
433 433  
434 -== 4.4  Add a LoRaWAN End Device ==
435 -
436 436  (((
437 437  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
438 438  )))
... ... @@ -445,8 +445,6 @@
445 445  
446 446  (((
447 447  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
448 -
449 -
450 450  )))
451 451  
452 452  (((
... ... @@ -461,12 +461,10 @@
461 461  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
462 462  )))
463 463  
464 -[[image:1657094382177-591.png]]
442 +[[image:1652422840936-838.png]]
465 465  
466 466  (((
467 467  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
468 -
469 -
470 470  )))
471 471  
472 472  (((
... ... @@ -477,19 +477,16 @@
477 477  Select **Add Application** to open the screen below.
478 478  )))
479 479  
480 -[[image:1657094417175-831.png]]
456 +[[image:1652422946999-255.png||height="356" width="744"]]
481 481  
482 482  Open the **Application **select** Add end device**
483 483  
484 -
485 485  Start Register the end device
486 486  
487 -[[image:1657094444802-101.png]]
462 +[[image:1652422975885-591.png||height="359" width="726"]]
488 488  
489 489  (((
490 490  Select OTAA activation mode
491 -
492 -
493 493  )))
494 494  
495 495  (((
... ... @@ -496,22 +496,18 @@
496 496  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
497 497  )))
498 498  
499 -[[image:1657094475730-208.png]]
472 +[[image:1652422998005-968.png||height="352" width="744"]]
500 500  
501 501  First, input the End device ID, AppEUI and DevEUI.
502 502  
476 +[[image:1652423022781-339.png||height="365" width="741"]]
503 503  
504 -[[image:1657094646429-966.png]]
505 -
506 506  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
507 507  
480 +[[image:1652423046741-467.png||height="355" width="736"]]
508 508  
509 -[[image:1657094674045-755.png]]
510 -
511 511  (((
512 512  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
513 -
514 -
515 515  )))
516 516  
517 517  (((
... ... @@ -522,40 +522,36 @@
522 522  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
523 523  )))
524 524  
525 -[[image:1657094791060-639.png]]
494 +[[image:1652423277549-324.png||height="273" width="745"]]
526 526  
496 += 5. Web Configure Pages =
527 527  
528 -= 5.  Web Configure Pages =
498 +== 5.1 Home ==
529 529  
530 -== 5.1  Home ==
531 -
532 532  Shows the system running status.
533 533  
534 -[[image:1657094893942-726.png]]
502 +[[image:1652423418568-752.png||height="329" width="724"]]
535 535  
504 +== 5.2 LoRa Settings ==
536 536  
537 -== 5.2  LoRa Settings ==
506 +=== 5.2.1 LoRa ~-~-> LoRa ===
538 538  
539 -=== 5.2.1  LoRa ~-~-> LoRa ===
540 -
541 541  (((
542 542  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
543 543  )))
544 544  
545 545  (((
546 -Different LPS8N hardware version can support different frequency range:
513 +Different DLOS8N hardware version can support different frequency range:
547 547  )))
548 548  
549 -* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
550 -* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
516 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
517 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
551 551  
552 552  (((
553 -
554 -
555 -After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
520 +After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
556 556  )))
557 557  
558 -[[image:1657094930903-357.png]]
523 +[[image:1652423554776-574.png||height="380" width="740"]]
559 559  
560 560  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
561 561  
... ... @@ -562,7 +562,7 @@
562 562  
563 563  === 5.2.2 LoRa ~-~-> ABP Decryption ===
564 564  
565 -The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
530 +The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
566 566  
567 567  * No internet connection.
568 568  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -571,13 +571,12 @@
571 571  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
572 572  )))
573 573  
574 -[[image:1657095412271-942.png]]
539 +[[image:1652423628833-467.png||height="357" width="755"]]
575 575  
541 +== 5.3 LoRaWAN Settings ==
576 576  
577 -== 5.3  LoRaWAN Settings ==
543 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
578 578  
579 -=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
580 -
581 581  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
582 582  
583 583  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -584,21 +584,18 @@
584 584  
585 585  (% style="color:red" %)**Note:**
586 586  
587 -~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
551 +~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
588 588  
589 589  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
590 590  
591 591  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
592 592  
557 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
593 593  
594 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
595 -
596 596  [[image:1652428499323-384.png||height="275" width="723"]]
597 597  
598 598  (((
599 599  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
600 -
601 -
602 602  )))
603 603  
604 604  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
... ... @@ -613,7 +613,6 @@
613 613  
614 614  [[image:1652428648903-878.png||height="266" width="731"]]
615 615  
616 -
617 617  == 5.4 MQTT Settings ==
618 618  
619 619  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -623,7 +623,6 @@
623 623  
624 624  [[image:1652428705046-212.png||height="417" width="733"]]
625 625  
626 -
627 627  == 5.5 System ==
628 628  
629 629  === 5.5.1 System ~-~-> System Overview ===
... ... @@ -630,13 +630,11 @@
630 630  
631 631  Shows the system info:
632 632  
633 -[[image:1657155158184-134.png]]
592 +[[image:1652428773760-580.png||height="408" width="728"]]
634 634  
635 -
636 -
637 637  === 5.5.2 System ~-~-> General ( login settings) ===
638 638  
639 -[[image:1657155183982-792.png]]
596 +[[image:1652428861256-300.png||height="354" width="724"]]
640 640  
641 641  (((
642 642  **__System Password:__**
... ... @@ -651,14 +651,11 @@
651 651  )))
652 652  
653 653  (((
654 -**__Timezone:  __**Set device timezone.
611 +**__Timezone:__**Set device timezone.
655 655  )))
656 656  
657 657  (((
658 -**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
659 -
660 -
661 -
615 +**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
662 662  )))
663 663  
664 664  === 5.5.3 System ~-~-> Network ===
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -52.8 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0