Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 135.1 >
edited by Xiaoling
on 2022/07/07 08:52
To version < 100.1 >
edited by Xiaoling
on 2022/07/06 11:55
>
Change comment: Uploaded new attachment "image-20220706115518-3.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -60,6 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +
64 +
63 63  (% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
... ... @@ -70,6 +70,8 @@
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
75 +
76 +
73 73  (% style="color:#037691" %)**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
... ... @@ -83,6 +83,8 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
90 +
91 +
86 86  (% style="color:#037691" %)**LoRa Spec:**
87 87  
88 88  * Up to -140 dBm sensitivity
... ... @@ -94,6 +94,8 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
103 +
104 +
97 97  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
98 98  
99 99  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -108,6 +108,7 @@
108 108  
109 109  == 1.3  Features ==
110 110  
119 +
111 111  * Open Source OpenWrt system
112 112  * Managed by Web GUI, SSH via WAN or WiFi
113 113  * Remote access with Reverse-SSH or remote.it
... ... @@ -137,79 +137,81 @@
137 137  
138 138  == 1.6  LED Indicators ==
139 139  
149 +[[image:1652411720670-489.png]]
140 140  
141 -LPS8N has totally four LEDs, They are:
142 142  
143 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
144 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
145 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
146 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
147 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
148 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
152 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
149 149  
150 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
154 +(((
155 +(((
156 +* (((
157 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
158 +)))
159 +)))
151 151  
161 +* (((
162 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
163 +)))
164 +* (((
165 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
152 152  
153 153  
154 154  
155 -= 2.  Access and Configure LPS8N =
156 -
157 -(((
158 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
169 +
159 159  )))
171 +)))
160 160  
173 +== 1.7 WiFi Direction ==
161 161  
162 -== 2.1  Find IP address of LPS8N ==
175 +DLOS8N use directional WiFi Antenna. The best direction is as below:
163 163  
164 -=== 2.1.1  Connect via WiFi ===
177 +[[image:1652412859663-161.png||height="341" width="333"]]
165 165  
166 -[[image:1657085974260-168.png]]
179 += 2. Access and Configure DLOS8N =
167 167  
181 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
168 168  
169 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
183 +== 2.1 Find IP address of DLOS8N ==
170 170  
185 +=== 2.1.1 Connect via WiFi ===
186 +
187 +[[image:1652412985720-934.png]]
188 +
189 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
190 +
171 171  [[image:1652413127647-377.png]]
172 172  
193 +(% style="background-color:#ffffcc" %)dragino+dragino
173 173  
174 174  (((
175 175  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
176 -
177 -
178 -
179 179  )))
180 180  
181 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
199 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
182 182  
183 -[[image:1657086105922-299.png]]
201 +[[image:1652414114583-532.png]]
184 184  
185 185  
186 186  (((
187 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
188 -
189 -
190 -
205 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
191 191  )))
192 192  
193 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
208 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
194 194  
195 -[[image:1657086192720-649.png]]
210 +[[image:1652414137639-956.png]]
196 196  
197 197  
198 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
213 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
199 199  
215 +=== 2.1.4 Connect via Ethernet with fall back ip ===
200 200  
217 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
201 201  
202 -=== 2.1.4  Connect via Ethernet with fall back ip ===
219 +== 2.2 Access Configure Web UI ==
203 203  
204 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
205 -
206 -
207 -
208 -== 2.2  Access Configure Web UI ==
209 -
210 210  **Web Interface**
211 211  
212 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
223 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
213 213  
214 214  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
215 215  
... ... @@ -218,7 +218,7 @@
218 218  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
219 219  
220 220  
221 -You will see the login interface of LPS8N as shown below.
232 +You will see the login interface of DLOS8N as shown below.
222 222  
223 223  The account details for Web Login are:
224 224  
... ... @@ -228,68 +228,50 @@
228 228  
229 229  [[image:1652414287022-223.png]]
230 230  
242 += 3. Typical Network Setup =
231 231  
244 +== 3.1 Overview ==
232 232  
233 -= 3.  Typical Network Setup =
246 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
234 234  
235 -== 3.1  Overview ==
236 -
237 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
238 -
239 239  * **WAN Port Internet Mode**
240 240  * **WiFi Client Mode**
241 241  * **WiFi AP Mode**
251 +* **Cellular Mode**
242 242  
253 +== 3.2 Use WAN port to access Internet ==
243 243  
255 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
244 244  
257 +[[image:1652420169255-959.png]]
245 245  
246 -== 3.2  Use WAN port to access Internet ==
259 +== 3.3 Access the Internet as a WiFi Client ==
247 247  
248 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
249 -
250 -
251 -[[image:1657088560833-398.png]]
252 -
253 -
254 -== 3.3  Access the Internet as a WiFi Client ==
255 -
256 256  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
257 257  
258 258  (((
259 259  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
260 -
261 -[[image:1657088818095-182.png]]
262 262  )))
263 263  
267 +[[image:1652420327792-211.png]]
264 264  
265 265  (((
266 266  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
267 -
268 -
269 269  )))
270 270  
271 -== 3.4  Use built-in 4G modem for internet access ==
273 +== 3.4 Access the Internet via Cellular ==
272 272  
273 -(((
274 -(((
275 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
276 -)))
275 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
277 277  
278 -
279 279  (((
280 -First, install the Micro SIM card as below direction
278 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
281 281  )))
282 282  
283 -(((
284 -Second, Power off/ ON LPS8N to let it detect the SIM card.
285 -)))
286 -)))
281 +[[image:1652420606018-181.png]]
287 287  
288 288  
289 -[[image:1657090855037-497.png]]
290 -
291 291  (((
292 -
285 +[[image:1652420718132-929.png||height="427" width="727"]]
293 293  )))
294 294  
295 295  (((
... ... @@ -301,88 +301,78 @@
301 301  )))
302 302  
303 303  (((
304 -[[image:1657090932270-444.png]]
297 +[[image:1652421032117-341.png||height="329" width="752"]]
305 305  )))
306 306  
300 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
307 307  
308 -== 3.5  Check Internet connection ==
302 +== 3.5 Check Internet connection ==
309 309  
310 310  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
311 311  
312 312  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
313 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
314 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
307 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
308 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
315 315  
316 -[[image:1657091099235-452.png]]
310 +[[image:1652421351382-793.png||height="339" width="765"]]
317 317  
312 += 4. Example: Configure as a LoRaWAN gateway =
318 318  
314 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
319 319  
320 -= 4.  Example: Configure as a LoRaWAN gateway =
321 -
322 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
323 -
324 324  (((
325 -[[image:1657091257648-882.png]]
317 +[[image:image-20220513140429-1.png||height="565" width="824"]]
326 326  )))
327 327  
328 -(((
329 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
330 -)))
320 +This chapter describes how to use the DLOS8Nto work with
331 331  
322 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
332 332  
324 +== 4.1 Create a gateway in TTN V3 Server ==
333 333  
334 -== 4.1  Create a gateway in TTN V3 Server ==
335 -
336 336  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
337 337  
338 338  (((
339 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
329 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
340 340  )))
341 341  
342 342  (((
343 -[[image:1657091583941-544.png]]
333 +[[image:1652421929753-168.png||height="403" width="739"]]
344 344  )))
345 345  
346 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
336 +The example gateway id is: **a840411e96744154**
347 347  
348 -
349 349  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
350 350  
351 351  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
352 352  
353 -[[image:1657091739530-531.png]]
342 +[[image:1652422127479-258.png||height="346" width="738"]]
354 354  
355 -
356 356  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
357 357  
358 358  (((
359 -[[image:1657091719947-297.png]]
347 +[[image:1652422142236-792.png||height="356" width="737"]]
360 360  )))
361 361  
362 362  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
363 363  
352 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
353 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
354 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
355 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
364 364  
365 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
366 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
367 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
368 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
369 -
370 370  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
371 371  
372 -[[image:1657091941182-367.png]]
359 +[[image:1652422440891-514.png||height="360" width="747"]]
373 373  
374 374  Click the Gateway icon and then click Add gateway.
375 375  
376 -
377 377  Open the following page:
378 378  
365 + [[image:1652422470352-518.png||height="391" width="716"]]
379 379  
380 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
367 +[[image:1652422479876-297.png||height="398" width="729"]]
381 381  
382 -
383 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
384 -
385 -
386 386  (((
387 387  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
388 388  )))
... ... @@ -389,17 +389,16 @@
389 389  
390 390  After creating the gateway, you can see the gateway info, as below.
391 391  
392 -[[image:1657094130908-567.png]](% style="display:none" %)
375 +[[image:1652422509034-682.png||height="299" width="739"]]
393 393  
377 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
394 394  
395 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
396 -
397 397  (((
398 -You can now configure the LPS8N to let it connect to TTN network V3.
380 +You can now configure the DLOS8N to let it connect to TTN network V3.
399 399  )))
400 400  
401 401  (((
402 -Make sure your LPS8N has a working Internet Connection first.
384 +Make sure your DLOS8N has a working Internet Connection first.
403 403  )))
404 404  
405 405  (((
... ... @@ -406,35 +406,31 @@
406 406  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
407 407  )))
408 408  
409 -[[image:1657094183213-301.png]]
391 +[[image:1652422624783-580.png||height="327" width="729"]]
410 410  
411 411  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
412 412  
413 -
414 414  In the home page, we can see the LoRaWAN connection is ready now.
415 415  
416 -[[image:1657094202420-798.png]]
397 +[[image:1652422685063-596.png||height="327" width="729"]]
417 417  
418 -
419 419  In TTN v3 portal, we can also see the gateway is connected.
420 420  
421 -[[image:1657094221515-510.png]]
401 +[[image:1652422703020-955.png||height="343" width="730"]]
422 422  
403 +== 4.3 Configure frequency ==
423 423  
424 -== 4.3  Configure frequency ==
405 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
425 425  
426 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
407 +[[image:1652422737399-529.png||height="362" width="737"]]
427 427  
428 -[[image:1657094249818-468.png]]
429 429  
430 -
431 431  In logread page, user can check the frequency actually used.
432 432  
433 - [[image:1657094333704-207.png]]
412 + [[image:1652422763536-750.png||height="514" width="730"]]
434 434  
414 +== 4.4 Add a LoRaWAN End Device ==
435 435  
436 -== 4.4  Add a LoRaWAN End Device ==
437 -
438 438  (((
439 439  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
440 440  )))
... ... @@ -447,8 +447,6 @@
447 447  
448 448  (((
449 449  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
450 -
451 -
452 452  )))
453 453  
454 454  (((
... ... @@ -463,12 +463,10 @@
463 463  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
464 464  )))
465 465  
466 -[[image:1657094382177-591.png]]
442 +[[image:1652422840936-838.png]]
467 467  
468 468  (((
469 469  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
470 -
471 -
472 472  )))
473 473  
474 474  (((
... ... @@ -479,19 +479,16 @@
479 479  Select **Add Application** to open the screen below.
480 480  )))
481 481  
482 -[[image:1657094417175-831.png]]
456 +[[image:1652422946999-255.png||height="356" width="744"]]
483 483  
484 484  Open the **Application **select** Add end device**
485 485  
486 -
487 487  Start Register the end device
488 488  
489 -[[image:1657094444802-101.png]]
462 +[[image:1652422975885-591.png||height="359" width="726"]]
490 490  
491 491  (((
492 492  Select OTAA activation mode
493 -
494 -
495 495  )))
496 496  
497 497  (((
... ... @@ -498,22 +498,18 @@
498 498  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
499 499  )))
500 500  
501 -[[image:1657094475730-208.png]]
472 +[[image:1652422998005-968.png||height="352" width="744"]]
502 502  
503 503  First, input the End device ID, AppEUI and DevEUI.
504 504  
476 +[[image:1652423022781-339.png||height="365" width="741"]]
505 505  
506 -[[image:1657094646429-966.png]]
507 -
508 508  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
509 509  
480 +[[image:1652423046741-467.png||height="355" width="736"]]
510 510  
511 -[[image:1657094674045-755.png]]
512 -
513 513  (((
514 514  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
515 -
516 -
517 517  )))
518 518  
519 519  (((
... ... @@ -524,40 +524,36 @@
524 524  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
525 525  )))
526 526  
527 -[[image:1657094791060-639.png]]
494 +[[image:1652423277549-324.png||height="273" width="745"]]
528 528  
496 += 5. Web Configure Pages =
529 529  
530 -= 5.  Web Configure Pages =
498 +== 5.1 Home ==
531 531  
532 -== 5.1  Home ==
533 -
534 534  Shows the system running status.
535 535  
536 -[[image:1657094893942-726.png]]
502 +[[image:1652423418568-752.png||height="329" width="724"]]
537 537  
504 +== 5.2 LoRa Settings ==
538 538  
539 -== 5.2  LoRa Settings ==
506 +=== 5.2.1 LoRa ~-~-> LoRa ===
540 540  
541 -=== 5.2.1  LoRa ~-~-> LoRa ===
542 -
543 543  (((
544 544  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
545 545  )))
546 546  
547 547  (((
548 -Different LPS8N hardware version can support different frequency range:
513 +Different DLOS8N hardware version can support different frequency range:
549 549  )))
550 550  
551 -* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
552 -* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
516 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
517 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
553 553  
554 554  (((
555 -
556 -
557 -After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
520 +After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
558 558  )))
559 559  
560 -[[image:1657094930903-357.png]]
523 +[[image:1652423554776-574.png||height="380" width="740"]]
561 561  
562 562  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
563 563  
... ... @@ -564,7 +564,7 @@
564 564  
565 565  === 5.2.2 LoRa ~-~-> ABP Decryption ===
566 566  
567 -The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
530 +The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
568 568  
569 569  * No internet connection.
570 570  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -573,13 +573,12 @@
573 573  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
574 574  )))
575 575  
576 -[[image:1657095412271-942.png]]
539 +[[image:1652423628833-467.png||height="357" width="755"]]
577 577  
541 +== 5.3 LoRaWAN Settings ==
578 578  
579 -== 5.3  LoRaWAN Settings ==
543 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
580 580  
581 -=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
582 -
583 583  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
584 584  
585 585  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -586,21 +586,18 @@
586 586  
587 587  (% style="color:red" %)**Note:**
588 588  
589 -~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
551 +~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
590 590  
591 591  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
592 592  
593 593  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
594 594  
557 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
595 595  
596 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
597 -
598 598  [[image:1652428499323-384.png||height="275" width="723"]]
599 599  
600 600  (((
601 601  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
602 -
603 -
604 604  )))
605 605  
606 606  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
... ... @@ -615,7 +615,6 @@
615 615  
616 616  [[image:1652428648903-878.png||height="266" width="731"]]
617 617  
618 -
619 619  == 5.4 MQTT Settings ==
620 620  
621 621  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -625,7 +625,6 @@
625 625  
626 626  [[image:1652428705046-212.png||height="417" width="733"]]
627 627  
628 -
629 629  == 5.5 System ==
630 630  
631 631  === 5.5.1 System ~-~-> System Overview ===
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.0 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0