Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 133.1 >
edited by Xiaoling
on 2022/07/06 18:20
To version < 98.1 >
edited by Xiaoling
on 2022/07/06 11:55
>
Change comment: Uploaded new attachment "image-20220706115518-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -60,6 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +
64 +
63 63  (% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
... ... @@ -70,6 +70,8 @@
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
75 +
76 +
73 73  (% style="color:#037691" %)**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
... ... @@ -83,6 +83,8 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
90 +
91 +
86 86  (% style="color:#037691" %)**LoRa Spec:**
87 87  
88 88  * Up to -140 dBm sensitivity
... ... @@ -94,6 +94,8 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
103 +
104 +
97 97  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
98 98  
99 99  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -103,8 +103,12 @@
103 103  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
114 +
115 +
116 +
106 106  == 1.3  Features ==
107 107  
119 +
108 108  * Open Source OpenWrt system
109 109  * Managed by Web GUI, SSH via WAN or WiFi
110 110  * Remote access with Reverse-SSH or remote.it
... ... @@ -119,6 +119,9 @@
119 119  * Support LoRaWAN basic station.
120 120  * Optional 3G/4G cellular connection
121 121  
134 +
135 +
136 +
122 122  == 1.4  Hardware System Structure ==
123 123  
124 124  [[image:1657079015096-949.png]]
... ... @@ -131,77 +131,81 @@
131 131  
132 132  == 1.6  LED Indicators ==
133 133  
149 +[[image:1652411720670-489.png]]
134 134  
135 -LPS8N has totally four LEDs, They are:
136 136  
137 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
138 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
139 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
140 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
141 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
142 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
152 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
143 143  
144 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
154 +(((
155 +(((
156 +* (((
157 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
158 +)))
159 +)))
145 145  
161 +* (((
162 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
163 +)))
164 +* (((
165 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
146 146  
147 -= 2.  Access and Configure LPS8N =
148 148  
149 -(((
150 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
168 +
169 +
151 151  )))
171 +)))
152 152  
173 +== 1.7 WiFi Direction ==
153 153  
154 -== 2.1  Find IP address of LPS8N ==
175 +DLOS8N use directional WiFi Antenna. The best direction is as below:
155 155  
156 -=== 2.1.1  Connect via WiFi ===
177 +[[image:1652412859663-161.png||height="341" width="333"]]
157 157  
158 -[[image:1657085974260-168.png]]
179 += 2. Access and Configure DLOS8N =
159 159  
181 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
160 160  
161 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
183 +== 2.1 Find IP address of DLOS8N ==
162 162  
185 +=== 2.1.1 Connect via WiFi ===
186 +
187 +[[image:1652412985720-934.png]]
188 +
189 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
190 +
163 163  [[image:1652413127647-377.png]]
164 164  
193 +(% style="background-color:#ffffcc" %)dragino+dragino
165 165  
166 166  (((
167 167  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
168 -
169 -
170 -
171 171  )))
172 172  
173 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
199 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
174 174  
175 -[[image:1657086105922-299.png]]
201 +[[image:1652414114583-532.png]]
176 176  
177 177  
178 178  (((
179 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
180 -
181 -
182 -
205 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
183 183  )))
184 184  
185 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
208 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
186 186  
187 -[[image:1657086192720-649.png]]
210 +[[image:1652414137639-956.png]]
188 188  
189 189  
190 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
213 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
191 191  
215 +=== 2.1.4 Connect via Ethernet with fall back ip ===
192 192  
217 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
193 193  
194 -=== 2.1.4  Connect via Ethernet with fall back ip ===
219 +== 2.2 Access Configure Web UI ==
195 195  
196 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
197 -
198 -
199 -
200 -== 2.2  Access Configure Web UI ==
201 -
202 202  **Web Interface**
203 203  
204 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
223 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
205 205  
206 206  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
207 207  
... ... @@ -210,7 +210,7 @@
210 210  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
211 211  
212 212  
213 -You will see the login interface of LPS8N as shown below.
232 +You will see the login interface of DLOS8N as shown below.
214 214  
215 215  The account details for Web Login are:
216 216  
... ... @@ -220,65 +220,50 @@
220 220  
221 221  [[image:1652414287022-223.png]]
222 222  
242 += 3. Typical Network Setup =
223 223  
244 +== 3.1 Overview ==
224 224  
225 -= 3.  Typical Network Setup =
246 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
226 226  
227 -== 3.1  Overview ==
228 -
229 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 -
231 231  * **WAN Port Internet Mode**
232 232  * **WiFi Client Mode**
233 233  * **WiFi AP Mode**
251 +* **Cellular Mode**
234 234  
235 -== 3.2  Use WAN port to access Internet ==
253 +== 3.2 Use WAN port to access Internet ==
236 236  
237 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
255 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
238 238  
257 +[[image:1652420169255-959.png]]
239 239  
240 -[[image:1657088560833-398.png]]
259 +== 3.3 Access the Internet as a WiFi Client ==
241 241  
242 -
243 -== 3.3  Access the Internet as a WiFi Client ==
244 -
245 245  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
246 246  
247 247  (((
248 248  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
249 -
250 -[[image:1657088818095-182.png]]
251 251  )))
252 252  
267 +[[image:1652420327792-211.png]]
253 253  
254 254  (((
255 255  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
256 -
257 -
258 258  )))
259 259  
260 -== 3.4  Use built-in 4G modem for internet access ==
273 +== 3.4 Access the Internet via Cellular ==
261 261  
262 -(((
263 -(((
264 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
265 -)))
275 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
266 266  
267 -
268 268  (((
269 -First, install the Micro SIM card as below direction
278 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
270 270  )))
271 271  
272 -(((
273 -Second, Power off/ ON LPS8N to let it detect the SIM card.
274 -)))
275 -)))
281 +[[image:1652420606018-181.png]]
276 276  
277 277  
278 -[[image:1657090855037-497.png]]
279 -
280 280  (((
281 -
285 +[[image:1652420718132-929.png||height="427" width="727"]]
282 282  )))
283 283  
284 284  (((
... ... @@ -290,88 +290,78 @@
290 290  )))
291 291  
292 292  (((
293 -[[image:1657090932270-444.png]]
297 +[[image:1652421032117-341.png||height="329" width="752"]]
294 294  )))
295 295  
300 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
296 296  
297 -== 3.5  Check Internet connection ==
302 +== 3.5 Check Internet connection ==
298 298  
299 299  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
300 300  
301 301  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
302 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
303 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
307 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
308 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
304 304  
305 -[[image:1657091099235-452.png]]
310 +[[image:1652421351382-793.png||height="339" width="765"]]
306 306  
312 += 4. Example: Configure as a LoRaWAN gateway =
307 307  
314 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
308 308  
309 -= 4.  Example: Configure as a LoRaWAN gateway =
310 -
311 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
312 -
313 313  (((
314 -[[image:1657091257648-882.png]]
317 +[[image:image-20220513140429-1.png||height="565" width="824"]]
315 315  )))
316 316  
317 -(((
318 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
319 -)))
320 +This chapter describes how to use the DLOS8Nto work with
320 320  
322 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
321 321  
324 +== 4.1 Create a gateway in TTN V3 Server ==
322 322  
323 -== 4.1  Create a gateway in TTN V3 Server ==
324 -
325 325  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
326 326  
327 327  (((
328 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
329 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
329 329  )))
330 330  
331 331  (((
332 -[[image:1657091583941-544.png]]
333 +[[image:1652421929753-168.png||height="403" width="739"]]
333 333  )))
334 334  
335 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
336 +The example gateway id is: **a840411e96744154**
336 336  
337 -
338 338  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
339 339  
340 340  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
341 341  
342 -[[image:1657091739530-531.png]]
342 +[[image:1652422127479-258.png||height="346" width="738"]]
343 343  
344 -
345 345  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
346 346  
347 347  (((
348 -[[image:1657091719947-297.png]]
347 +[[image:1652422142236-792.png||height="356" width="737"]]
349 349  )))
350 350  
351 351  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
352 352  
352 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
353 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
354 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
355 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
353 353  
354 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
355 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
356 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
357 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
358 -
359 359  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
360 360  
361 -[[image:1657091941182-367.png]]
359 +[[image:1652422440891-514.png||height="360" width="747"]]
362 362  
363 363  Click the Gateway icon and then click Add gateway.
364 364  
365 -
366 366  Open the following page:
367 367  
365 + [[image:1652422470352-518.png||height="391" width="716"]]
368 368  
369 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
367 +[[image:1652422479876-297.png||height="398" width="729"]]
370 370  
371 -
372 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
373 -
374 -
375 375  (((
376 376  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
377 377  )))
... ... @@ -378,17 +378,16 @@
378 378  
379 379  After creating the gateway, you can see the gateway info, as below.
380 380  
381 -[[image:1657094130908-567.png]](% style="display:none" %)
375 +[[image:1652422509034-682.png||height="299" width="739"]]
382 382  
377 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
383 383  
384 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
385 -
386 386  (((
387 -You can now configure the LPS8N to let it connect to TTN network V3.
380 +You can now configure the DLOS8N to let it connect to TTN network V3.
388 388  )))
389 389  
390 390  (((
391 -Make sure your LPS8N has a working Internet Connection first.
384 +Make sure your DLOS8N has a working Internet Connection first.
392 392  )))
393 393  
394 394  (((
... ... @@ -395,35 +395,31 @@
395 395  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
396 396  )))
397 397  
398 -[[image:1657094183213-301.png]]
391 +[[image:1652422624783-580.png||height="327" width="729"]]
399 399  
400 400  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
401 401  
402 -
403 403  In the home page, we can see the LoRaWAN connection is ready now.
404 404  
405 -[[image:1657094202420-798.png]]
397 +[[image:1652422685063-596.png||height="327" width="729"]]
406 406  
407 -
408 408  In TTN v3 portal, we can also see the gateway is connected.
409 409  
410 -[[image:1657094221515-510.png]]
401 +[[image:1652422703020-955.png||height="343" width="730"]]
411 411  
403 +== 4.3 Configure frequency ==
412 412  
413 -== 4.3  Configure frequency ==
405 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
414 414  
415 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
407 +[[image:1652422737399-529.png||height="362" width="737"]]
416 416  
417 -[[image:1657094249818-468.png]]
418 418  
419 -
420 420  In logread page, user can check the frequency actually used.
421 421  
422 - [[image:1657094333704-207.png]]
412 + [[image:1652422763536-750.png||height="514" width="730"]]
423 423  
414 +== 4.4 Add a LoRaWAN End Device ==
424 424  
425 -== 4.4  Add a LoRaWAN End Device ==
426 -
427 427  (((
428 428  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
429 429  )))
... ... @@ -436,8 +436,6 @@
436 436  
437 437  (((
438 438  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
439 -
440 -
441 441  )))
442 442  
443 443  (((
... ... @@ -452,12 +452,10 @@
452 452  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
453 453  )))
454 454  
455 -[[image:1657094382177-591.png]]
442 +[[image:1652422840936-838.png]]
456 456  
457 457  (((
458 458  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
459 -
460 -
461 461  )))
462 462  
463 463  (((
... ... @@ -468,19 +468,16 @@
468 468  Select **Add Application** to open the screen below.
469 469  )))
470 470  
471 -[[image:1657094417175-831.png]]
456 +[[image:1652422946999-255.png||height="356" width="744"]]
472 472  
473 473  Open the **Application **select** Add end device**
474 474  
475 -
476 476  Start Register the end device
477 477  
478 -[[image:1657094444802-101.png]]
462 +[[image:1652422975885-591.png||height="359" width="726"]]
479 479  
480 480  (((
481 481  Select OTAA activation mode
482 -
483 -
484 484  )))
485 485  
486 486  (((
... ... @@ -487,22 +487,18 @@
487 487  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
488 488  )))
489 489  
490 -[[image:1657094475730-208.png]]
472 +[[image:1652422998005-968.png||height="352" width="744"]]
491 491  
492 492  First, input the End device ID, AppEUI and DevEUI.
493 493  
476 +[[image:1652423022781-339.png||height="365" width="741"]]
494 494  
495 -[[image:1657094646429-966.png]]
496 -
497 497  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
498 498  
480 +[[image:1652423046741-467.png||height="355" width="736"]]
499 499  
500 -[[image:1657094674045-755.png]]
501 -
502 502  (((
503 503  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
504 -
505 -
506 506  )))
507 507  
508 508  (((
... ... @@ -513,40 +513,36 @@
513 513  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
514 514  )))
515 515  
516 -[[image:1657094791060-639.png]]
494 +[[image:1652423277549-324.png||height="273" width="745"]]
517 517  
496 += 5. Web Configure Pages =
518 518  
519 -= 5.  Web Configure Pages =
498 +== 5.1 Home ==
520 520  
521 -== 5.1  Home ==
522 -
523 523  Shows the system running status.
524 524  
525 -[[image:1657094893942-726.png]]
502 +[[image:1652423418568-752.png||height="329" width="724"]]
526 526  
504 +== 5.2 LoRa Settings ==
527 527  
528 -== 5.2  LoRa Settings ==
506 +=== 5.2.1 LoRa ~-~-> LoRa ===
529 529  
530 -=== 5.2.1  LoRa ~-~-> LoRa ===
531 -
532 532  (((
533 533  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
534 534  )))
535 535  
536 536  (((
537 -Different LPS8N hardware version can support different frequency range:
513 +Different DLOS8N hardware version can support different frequency range:
538 538  )))
539 539  
540 -* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
541 -* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
516 +* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
517 +* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
542 542  
543 543  (((
544 -
545 -
546 -After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
520 +After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
547 547  )))
548 548  
549 -[[image:1657094930903-357.png]]
523 +[[image:1652423554776-574.png||height="380" width="740"]]
550 550  
551 551  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
552 552  
... ... @@ -553,7 +553,7 @@
553 553  
554 554  === 5.2.2 LoRa ~-~-> ABP Decryption ===
555 555  
556 -The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
530 +The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
557 557  
558 558  * No internet connection.
559 559  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -562,13 +562,12 @@
562 562  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
563 563  )))
564 564  
565 -[[image:1657095412271-942.png]]
539 +[[image:1652423628833-467.png||height="357" width="755"]]
566 566  
541 +== 5.3 LoRaWAN Settings ==
567 567  
568 -== 5.3  LoRaWAN Settings ==
543 +=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
569 569  
570 -=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
571 -
572 572  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
573 573  
574 574  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -575,21 +575,18 @@
575 575  
576 576  (% style="color:red" %)**Note:**
577 577  
578 -~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
551 +~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
579 579  
580 580  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
581 581  
582 582  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
583 583  
557 +=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
584 584  
585 -=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
586 -
587 587  [[image:1652428499323-384.png||height="275" width="723"]]
588 588  
589 589  (((
590 590  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
591 -
592 -
593 593  )))
594 594  
595 595  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
... ... @@ -604,7 +604,6 @@
604 604  
605 605  [[image:1652428648903-878.png||height="266" width="731"]]
606 606  
607 -
608 608  == 5.4 MQTT Settings ==
609 609  
610 610  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
... ... @@ -614,7 +614,6 @@
614 614  
615 615  [[image:1652428705046-212.png||height="417" width="733"]]
616 616  
617 -
618 618  == 5.5 System ==
619 619  
620 620  === 5.5.1 System ~-~-> System Overview ===
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0