Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 131.1 >
edited by Xiaoling
on 2022/07/06 16:08
To version < 158.10 >
edited by Xiaoling
on 2022/07/29 10:43
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,6 +6,7 @@
6 6  
7 7  **Table of Contents：**
8 8  
9 +{{toc/}}
9 9  
10 10  
11 11  
... ... @@ -60,6 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
64 +
65 +
63 63  (% style="color:#037691" %)**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
... ... @@ -70,6 +70,8 @@
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
76 +
77 +
73 73  (% style="color:#037691" %)**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
... ... @@ -83,6 +83,8 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
91 +
92 +
86 86  (% style="color:#037691" %)**LoRa Spec:**
87 87  
88 88  * Up to -140 dBm sensitivity
... ... @@ -94,6 +94,8 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
104 +
105 +
97 97  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
98 98  
99 99  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -104,8 +104,11 @@
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
106 106  
116 +
117 +
107 107  == 1.3  Features ==
108 108  
120 +
109 109  * Open Source OpenWrt system
110 110  * Managed by Web GUI, SSH via WAN or WiFi
111 111  * Remote access with Reverse-SSH or remote.it
... ... @@ -121,16 +121,21 @@
121 121  * Optional 3G/4G cellular connection
122 122  
123 123  
136 +
124 124  == 1.4  Hardware System Structure ==
125 125  
139 +
126 126  [[image:1657079015096-949.png]]
127 127  
128 128  
143 +
129 129  == 1.5  LPS8N Applications ==
130 130  
146 +
131 131  [[image:1657079055940-721.png]]
132 132  
133 133  
150 +
134 134  == 1.6  LED Indicators ==
135 135  
136 136  
... ... @@ -147,16 +147,18 @@
147 147  
148 148  
149 149  
150 -
151 151  = 2.  Access and Configure LPS8N =
152 152  
169 +
153 153  (((
154 154  The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
155 155  )))
156 156  
157 157  
175 +
158 158  == 2.1  Find IP address of LPS8N ==
159 159  
178 +
160 160  === 2.1.1  Connect via WiFi ===
161 161  
162 162  [[image:1657085974260-168.png]]
... ... @@ -180,7 +180,7 @@
180 180  
181 181  
182 182  (((
183 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
202 +Alternatively, connect the LPS8N Ethernet port to your router and LPS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
184 184  
185 185  
186 186  
... ... @@ -188,6 +188,7 @@
188 188  
189 189  === 2.1.3  Connect via WiFi with DHCP IP from router ===
190 190  
210 +
191 191  [[image:1657086192720-649.png]]
192 192  
193 193  
... ... @@ -197,6 +197,7 @@
197 197  
198 198  === 2.1.4  Connect via Ethernet with fall back ip ===
199 199  
220 +
200 200  The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
201 201  
202 202  
... ... @@ -203,6 +203,7 @@
203 203  
204 204  == 2.2  Access Configure Web UI ==
205 205  
227 +
206 206  **Web Interface**
207 207  
208 208  Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
... ... @@ -228,8 +228,10 @@
228 228  
229 229  = 3.  Typical Network Setup =
230 230  
253 +
231 231  == 3.1  Overview ==
232 232  
256 +
233 233  The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
234 234  
235 235  * **WAN Port Internet Mode**
... ... @@ -237,8 +237,10 @@
237 237  * **WiFi AP Mode**
238 238  
239 239  
264 +
240 240  == 3.2  Use WAN port to access Internet ==
241 241  
267 +
242 242  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
243 243  
244 244  
... ... @@ -245,13 +245,16 @@
245 245  [[image:1657088560833-398.png]]
246 246  
247 247  
274 +
248 248  == 3.3  Access the Internet as a WiFi Client ==
249 249  
250 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251 251  
278 +In the WiFi Client Mode, LPS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
279 +
252 252  (((
253 253  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
254 254  
283 +
255 255  [[image:1657088818095-182.png]]
256 256  )))
257 257  
... ... @@ -259,11 +259,13 @@
259 259  (((
260 260  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
261 261  
291 +
262 262  
263 263  )))
264 264  
265 265  == 3.4  Use built-in 4G modem for internet access ==
266 266  
297 +
267 267  (((
268 268  (((
269 269  If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
... ... @@ -299,8 +299,10 @@
299 299  )))
300 300  
301 301  
333 +
302 302  == 3.5  Check Internet connection ==
303 303  
336 +
304 304  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
305 305  
306 306  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
... ... @@ -313,14 +313,16 @@
313 313  
314 314  = 4.  Example: Configure as a LoRaWAN gateway =
315 315  
349 +
316 316  LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
317 317  
352 +
318 318  (((
319 319  [[image:1657091257648-882.png]]
320 320  )))
321 321  
322 322  (((
323 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
358 +This chapter describes how to use the LPS8N to work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 324  )))
325 325  
326 326  
... ... @@ -327,6 +327,7 @@
327 327  
328 328  == 4.1  Create a gateway in TTN V3 Server ==
329 329  
365 +
330 330  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
331 331  
332 332  (((
... ... @@ -340,6 +340,7 @@
340 340  The example gateway id is: (% style="color:green" %)**a840411e96744154**
341 341  
342 342  
379 +
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -347,6 +347,7 @@
347 347  [[image:1657091739530-531.png]]
348 348  
349 349  
387 +
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 352  (((
... ... @@ -362,6 +362,7 @@
362 362  * Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 363  
364 364  
403 +
365 365  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
366 366  
367 367  [[image:1657091941182-367.png]]
... ... @@ -371,7 +371,6 @@
371 371  
372 372  Open the following page:
373 373  
374 -
375 375   [[image:image-20220706155323-5.png||height="579" width="1060"]]
376 376  
377 377  
... ... @@ -379,7 +379,9 @@
379 379  
380 380  
381 381  (((
382 -(% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
420 +(% style="color:red" %)**Notice: Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.**
421 +
422 +
383 383  )))
384 384  
385 385  After creating the gateway, you can see the gateway info, as below.
... ... @@ -387,8 +387,10 @@
387 387  [[image:1657094130908-567.png]](% style="display:none" %)
388 388  
389 389  
390 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
391 391  
431 +== 4.2  Configure LPS8N to connect to TTN v3 ==
432 +
433 +
392 392  (((
393 393  You can now configure the LPS8N to let it connect to TTN network V3.
394 394  )))
... ... @@ -403,9 +403,10 @@
403 403  
404 404  [[image:1657094183213-301.png]]
405 405  
406 -(% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
407 407  
449 +(% style="color:red" %)**Note: The server address must match the Gateway server address you choose in TTN V3.**
408 408  
451 +
409 409  In the home page, we can see the LoRaWAN connection is ready now.
410 410  
411 411  [[image:1657094202420-798.png]]
... ... @@ -416,8 +416,10 @@
416 416  [[image:1657094221515-510.png]]
417 417  
418 418  
462 +
419 419  == 4.3  Configure frequency ==
420 420  
465 +
421 421  We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
422 422  
423 423  [[image:1657094249818-468.png]]
... ... @@ -428,8 +428,10 @@
428 428   [[image:1657094333704-207.png]]
429 429  
430 430  
476 +
431 431  == 4.4  Add a LoRaWAN End Device ==
432 432  
479 +
433 433  (((
434 434  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
435 435  )))
... ... @@ -441,7 +441,7 @@
441 441  [[image:1652422794767-871.png]]
442 442  
443 443  (((
444 -(% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
491 +(% style="color:blue" %)**Step 1**: (%%)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
445 445  
446 446  
447 447  )))
... ... @@ -512,52 +512,69 @@
512 512  )))
513 513  
514 514  (((
515 -(% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
562 +(% style="color:blue" %)**Step 2**:  (%%)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
563 +
564 +
516 516  )))
517 517  
518 518  (((
519 -(% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
568 +(% style="color:red" %)**Note that it may take some time for the device data to appear in the TTN v3 display.**
569 +
570 +
520 520  )))
521 521  
522 522  [[image:1657094791060-639.png]]
523 523  
524 524  
525 -= 5. Web Configure Pages =
526 526  
527 -== 5.1 Home ==
577 += 5.  Web Configure Pages =
528 528  
579 +
580 +== 5.1  Home ==
581 +
582 +
529 529  Shows the system running status.
530 530  
531 -[[image:1652423418568-752.png||height="329" width="724"]]
585 +[[image:1657094893942-726.png]]
532 532  
533 -== 5.2 LoRa Settings ==
534 534  
535 -=== 5.2.1 LoRa ~-~-> LoRa ===
536 536  
589 +== 5.2  LoRa Settings ==
590 +
591 +
592 +=== 5.2.1  LoRa ~-~-> LoRa ===
593 +
594 +
537 537  (((
538 538  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
539 539  )))
540 540  
541 541  (((
542 -Different DLOS8N hardware version can support different frequency range:
600 +Different LPS8N hardware version can support different frequency range:
543 543  )))
544 544  
545 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
546 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
603 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
604 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
547 547  
548 548  (((
549 -After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
607 +
608 +
609 +(((
610 +After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
550 550  )))
612 +)))
551 551  
552 -[[image:1652423554776-574.png||height="380" width="740"]]
614 +[[image:1657094930903-357.png]]
553 553  
554 -Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
616 +(% style="color:red" %)**Note *:** **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
555 555  
556 556  
557 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
558 558  
559 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
620 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
560 560  
622 +
623 +The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
624 +
561 561  * No internet connection.
562 562  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
563 563  
... ... @@ -565,12 +565,16 @@
565 565  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
566 566  )))
567 567  
568 -[[image:1652423628833-467.png||height="357" width="755"]]
632 +[[image:1657095412271-942.png]]
569 569  
570 -== 5.3 LoRaWAN Settings ==
571 571  
572 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
573 573  
636 +== 5.3  LoRaWAN Settings ==
637 +
638 +
639 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
640 +
641 +
574 574  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
575 575  
576 576  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -577,22 +577,30 @@
577 577  
578 578  (% style="color:red" %)**Note:**
579 579  
580 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
648 +~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
581 581  
582 582  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
583 583  
584 584  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
585 585  
586 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
587 587  
655 +
656 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
657 +
658 +
588 588  [[image:1652428499323-384.png||height="275" width="723"]]
589 589  
661 +
590 590  (((
591 591  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
664 +
665 +
666 +
592 592  )))
593 593  
594 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
669 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
595 595  
671 +
596 596  (((
597 597  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
598 598  )))
... ... @@ -603,33 +603,41 @@
603 603  
604 604  [[image:1652428648903-878.png||height="266" width="731"]]
605 605  
606 -== 5.4 MQTT Settings ==
607 607  
608 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
683 +== 5.4  MQTT Settings ==
609 609  
685 +(((
686 +If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
687 +)))
688 +
689 +(((
610 610  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
691 +)))
611 611  
612 612  
613 613  [[image:1652428705046-212.png||height="417" width="733"]]
614 614  
615 -== 5.5 System ==
616 616  
617 -=== 5.5.1 System ~-~-> System Overview ===
697 +== 5.5  System ==
618 618  
699 +=== 5.5.1  System ~-~-> System Overview ===
700 +
619 619  Shows the system info:
620 620  
621 -[[image:1652428773760-580.png||height="408" width="728"]]
703 +[[image:1657155158184-134.png]]
622 622  
623 -=== 5.5.2 System ~-~-> General ( login settings) ===
624 624  
625 -[[image:1652428861256-300.png||height="354" width="724"]]
626 626  
707 +=== 5.5.2  System ~-~-> General ( login settings) ===
708 +
709 +[[image:1657155183982-792.png]]
710 +
627 627  (((
628 628  **__System Password:__**
629 629  )))
630 630  
631 631  (((
632 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
716 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
633 633  )))
634 634  
635 635  (((
... ... @@ -637,83 +637,106 @@
637 637  )))
638 638  
639 639  (((
640 -**__Timezone:__**Set device timezone.
724 +**__Timezone:  __**Set device timezone.
641 641  )))
642 642  
643 643  (((
644 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
728 +**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
729 +
730 +
731 +
645 645  )))
646 646  
647 -=== 5.5.3 System ~-~-> Network ===
734 +=== 5.5.3  System ~-~-> Network ===
648 648  
649 -[[image:1652429149053-824.png||height="467" width="725"]]
736 +[[image:1657155288223-566.png]]
650 650  
651 651  (((
652 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
739 +**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
653 653  )))
654 654  
655 655  (((
656 -__**WAN Settings:**__Setting for DLOS8N WAN port
743 +__**WAN Settings:  **__Setting for LPS8N WAN port
657 657  )))
658 658  
659 659  (((
660 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
747 +__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
661 661  
749 +
662 662  
663 663  )))
664 664  
665 -=== 5.5.4 System ~-~-> WiFi ===
753 +=== 5.5.4  System ~-~-> WiFi ===
666 666  
667 -DLOS8N WiFi Settings.
755 +LPS8N WiFi Settings.
668 668  
669 -[[image:1652429430767-921.png||height="367" width="723"]]
757 +[[image:1657155457089-430.png]]
670 670  
671 -=== 5.5.5 System ~-~-> Cellular ===
672 672  
760 +
761 +=== 5.5.5  System ~-~-> Cellular ===
762 +
673 673  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
674 674  
675 -[[image:1652429309615-825.png||height="320" width="732"]]
676 676  
677 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
766 +[[image:1657155507672-204.png]]
678 678  
679 -=== 5.5.6 System ~-~-> Network Status ===
768 +(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
680 680  
681 -[[image:1652429486609-208.png||height="415" width="728"]]
682 682  
683 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
684 684  
772 +=== 5.5.6  System ~-~-> Network Status ===
773 +
774 +
775 +[[image:1657155554265-721.png]]
776 +
777 +
778 +
779 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
780 +
685 685  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
686 686  
687 -[[image:1652429518191-846.png||height="332" width="733"]]
688 688  
689 -[[image:1652429527544-247.png||height="327" width="724"]]
784 +[[image:image-20220707112053-4.png||height="451" width="995"]]
690 690  
691 -[[image:1652429537849-154.png||height="339" width="722"]]
786 +[[image:image-20220707112053-5.png||height="453" width="1004"]]
692 692  
693 -Please see this document for detail:
788 +(% style="display:none" %)
694 694  
790 +(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
791 +
792 +(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
793 +
794 +[[image:image-20220707092040-3.png||height="449" width="956"]]
795 +
796 +
695 695  (((
696 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
798 +Please see this document for detail:  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
697 697  )))
698 698  
801 +(% style="display:none" %) (%%)
699 699  
700 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
803 +(((
804 +R-SSH is for remote access device and management, introduction for how to use: [[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]
805 +)))
701 701  
702 702  [[image:1652429624400-864.png||height="432" width="716"]]
703 703  
704 704  
705 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
706 706  
707 -We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
811 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
708 708  
813 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
814 +
709 709  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
710 710  
711 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
817 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
712 712  
713 713  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
714 714  
715 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
821 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
716 716  
823 +
717 717  (((
718 718  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
719 719  )))
... ... @@ -722,15 +722,22 @@
722 722  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
723 723  )))
724 724  
725 -[[image:1652429711145-862.png||height="270" width="737"]]
832 +[[image:1657156052651-770.png]]
726 726  
834 +(((
727 727  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
836 +)))
728 728  
838 +
839 +(((
729 729  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
841 +)))
730 730  
843 +(((
731 731  The system will automatically boot into the new firmware after upgrade.
845 +)))
732 732  
733 -[[image:1652429962190-224.png||height="358" width="729"]]
847 +[[image:1657156094153-520.png]]
734 734  
735 735  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
736 736  
... ... @@ -738,67 +738,127 @@
738 738  
739 739  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
740 740  
855 +
741 741  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
742 742  
743 -=== 5.5.9 System ~-~-> Reboot/Reset ===
744 744  
859 +=== 5.5.9  System ~-~-> Reboot/Reset ===
860 +
745 745  [[image:1652430197132-330.png||height="256" width="724"]]
746 746  
747 747  (((
748 748  
865 +
866 +
749 749  )))
750 750  
751 -=== 5.5.10 System ~-~-> Package Maintain ===
869 +=== 5.5.10  System ~-~-> Package Maintain ===
752 752  
753 -[[image:1652430243826-126.png||height="289" width="723"]]
754 754  
872 +[[image:1657156199070-491.png]]
873 +
755 755  Place to show what package has installed and possible to upgrade packages.
756 756  
757 -== 5.6 LogRead ==
758 758  
759 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
760 760  
878 +== 5.6  LogRead ==
761 761  
880 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
881 +
882 +
762 762  Show the frequency for LoRa Radio and traffics.
763 763  
764 -[[image:image-20220615204306-1.png||height="575" width="733"]]
885 +[[image:1657156300781-933.png]]
765 765  
766 766  
767 -Show the IoT Server Connection State and FWD State
768 768  
769 -[[image:image-20220616083933-1.png||height="556" width="729"]]
889 +=== 5.6.2  LogRead ~-~-> System Log ===
770 770  
771 -DLOS8 can view GPS location in the Logread FWD State
891 +Show the system log
772 772  
893 +[[image:1657156341198-226.png]]
773 773  
774 -Show the Error logs, RxTxJson lorawan packages, and PULL State
775 775  
776 -[[image:image-20220615205416-6.png||height="442" width="884"]]
777 777  
897 += 6.  More features =
778 778  
779 -=== 5.6.2 LogRead ~-~-> System Log ===
899 +== 6.1 Packet Filtering ==
780 780  
781 -Show the system log
901 +(((
902 +Drop unwanted packets.
903 +)))
782 782  
783 -[[image:1652430369760-511.png||height="373" width="730"]]
905 +(((
906 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
907 +)))
784 784  
785 -= 6. More features =
786 786  
787 -== 6.1 More instructions ==
910 +== 6.2 Remote Access ==
788 788  
912 +(((
913 +Remote Access Devices for management.
914 +)))
915 +
916 +(((
917 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
918 +)))
919 +
920 +
921 +== 6.3 How to decode ABP LoRaWAN node ==
922 +
923 +(((
924 +Decode ABP:
925 +)))
926 +
927 +(((
928 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
929 +)))
930 +
931 +
932 +== 6.4 How to set data to MQTT broker ==
933 +
934 +(((
935 +Only support ABP LoRaWAN End Node
936 +)))
937 +
938 +(((
939 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
940 +)))
941 +
942 +
943 +== 6.5  More instructions ==
944 +
789 789  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
790 790  
791 791  
792 -= 7. Linux System =
948 +== 6.6  Auto-Provision ==
793 793  
794 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
950 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
795 795  
796 -== 7.1 SSH Access for Linux console ==
952 +[[image:image-20220707092040-1.png||height="451" width="995"]]
797 797  
798 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
954 +[[image:image-20220707092040-2.png||height="452" width="1002"]]
799 799  
800 -IP address:  IP address of DLOS8N
956 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
801 801  
958 +(((
959 +Please see this document for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
960 +)))
961 +
962 +(% style="display:none" %) (%%)
963 +
964 += 7.  (% style="display:none" %) (%%)Linux System =
965 +
966 +The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
967 +
968 +(% style="display:none" %) (%%)
969 +
970 +== 7.1  SSH Access for Linux console ==
971 +
972 +User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
973 +
974 +IP address:  IP address of LPS8N
975 +
802 802  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
803 803  
804 804  User Name:      (% style="color:green" %)**root**
... ... @@ -807,17 +807,20 @@
807 807  
808 808  After logging in, you will be in the Linux console and can enter commands as shown below.
809 809  
810 -[[image:1652431588565-830.png]]
811 811  
985 +[[image:1657158198733-338.png]]
986 +
812 812  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
813 813  
814 -[[image:1652431609193-637.png||height="214" width="732"]]
815 815  
990 +[[image:1657158190234-805.png]]
816 816  
817 -== 7.2 Edit and Transfer files ==
818 818  
993 +
994 +== 7.2  Edit and Transfer files ==
995 +
819 819  (((
820 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
997 +The LPS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
821 821  )))
822 822  
823 823  (((
... ... @@ -825,7 +825,7 @@
825 825  )))
826 826  
827 827  (((
828 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
1005 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LPS8N, or edit the files directly in the windows.
829 829  )))
830 830  
831 831  (((
... ... @@ -835,14 +835,15 @@
835 835  [[image:1652431650755-450.png]]
836 836  
837 837  
838 -== 7.3 File System ==
839 839  
1016 +== 7.3  File System ==
1017 +
840 840  (((
841 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
1019 +The LPS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
842 842  )))
843 843  
844 844  (((
845 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
1023 +The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the LPS8N flash.
846 846  )))
847 847  
848 848  (((
... ... @@ -850,9 +850,9 @@
850 850  )))
851 851  
852 852  
853 -== 7.4 Package maintenance system ==
1031 +== 7.4  Package maintenance system ==
854 854  
855 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
1033 +LPS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure LPS8N to use **//iperf //**.
856 856  
857 857  (((
858 858  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
... ... @@ -863,11 +863,11 @@
863 863  )))
864 864  
865 865  (((
866 -(% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
1044 +(% style="color:green" %)**root@dragino-169d30:~~# opkg update**             (% style="color:black" %)~/~/ to get the latest packages list
867 867  )))
868 868  
869 869  (((
870 -(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
1048 +(% style="color:green" %)**root@dragino-169d30:~~# opkg list**    (% style="color:black" %) ~/~/shows the available packages
871 871  )))
872 872  
873 873  (((
... ... @@ -903,47 +903,103 @@
903 903  
904 904  (((
905 905  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
1084 +
1085 +
1086 +
906 906  )))
907 907  
908 -= 8. Upgrade Linux Firmware =
1089 += 8.  Upgrade Linux Firmware =
909 909  
1091 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
910 910  
911 -= 9. FAQ =
1093 +* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
912 912  
913 -== 9.1 How can I configure for a customized frequency band? ==
1095 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
914 914  
1097 +* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
1098 +
1099 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
1100 +
1101 +
915 915  (((
916 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
1103 +The file named as (% style="color:green" %)** xxxxx–xxxxx-squashfs-sysupgrade.bin **(%%)is the upgrade Image. There are different methods to upgrade, as below.
917 917  )))
918 918  
1106 +
1107 +== 8.1 Upgrade via Web UI ==
1108 +
919 919  (((
920 -
1110 +Go to the page: (% style="color:green" %)**Web ~-~-> System ~-~-> Firmware Upgrade**
921 921  )))
922 922  
923 -== 9.2 Can I connect DLOS8N to LORIOT? ==
1113 +(((
1114 +Select the required image and click (% style="color:red" %)**Flash Image.**(%%) The image will be uploaded to the device, and then click (% style="color:red" %)**Process Update**(%%) to upgrade.
1115 +)))
924 924  
925 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
926 926  
1118 +(((
1119 +(% style="color:red" %)**NOTE**(%%): You normally need to **//uncheck//** the //**Preserve Settings**// checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1120 +)))
927 927  
928 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
929 929  
930 930  (((
931 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
1124 +The system will automatically boot into the new firmware after upgrade.
932 932  )))
933 933  
1127 +[[image:1657158986600-386.png]]
1128 +
1129 +
1130 +== 8.2 Upgrade via Linux console ==
1131 +
934 934  (((
1133 +SCP the firmware to the system** (% style="color:green" %)/var(%%)** directory and then run
1134 +)))
1135 +
1136 +(((
1137 +(% style="color:#4472c4" %)** //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1138 +)))
1139 +
1140 +
1141 +(((
1142 +(% style="color:red" %)**NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1143 +)))
1144 +
1145 +
1146 +
1147 += 9.  FAQ =
1148 +
1149 +== 9.1  How can I configure for a customized frequency band? ==
1150 +
1151 +(((
1152 +See below link for how to customize frequency band: [[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]
1153 +)))
1154 +
1155 +(((
1156 +
1157 +)))
1158 +
1159 +== 9.2  Can I make my own firmware for the gateway, where can I find the source code? ==
1160 +
1161 +(((
1162 +Yes, You can make your own firmware for the LPS8N for branding purposes or to add customized applications.
1163 +)))
1164 +
1165 +(((
935 935  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
936 936  )))
937 937  
1169 +(((
1170 +
1171 +)))
938 938  
939 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
1173 +== 9.3  Can I use 868Mhz version for 915Mhz bands? ==
940 940  
941 941  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
942 942  
943 943  
944 -= 10. Trouble Shooting =
1178 += 10.  Trouble Shooting =
945 945  
946 -== 10.1 I get kernel error when install new package, how to fix? ==
1180 +== 10.1  I get kernel error when install new package, how to fix? ==
947 947  
948 948  In some cases, when installing a package with **//opkg//**, it will generate a kernel error such as below due to a mismatch I the kernel ID:
949 949  
... ... @@ -966,10 +966,10 @@
966 966  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
967 967  
968 968  
969 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
1203 +== 10.2  How to recover the LPS8N if the firmware crashes ==
970 970  
971 971  (((
972 -Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
1206 +Please follow this instruction to recover your gateway:  [[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]
973 973  )))
974 974  
975 975  (((
... ... @@ -976,12 +976,13 @@
976 976  
977 977  )))
978 978  
979 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1213 +== 10.3  I configured LPS8N for WiFi access and lost its IP. What to do now? ==
980 980  
981 -[[image:1652435238615-272.png||height="247" width="727"]]
1215 +[[image:1657159323292-776.png]]
982 982  
1217 +
983 983  (((
984 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1219 +The LPS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LPS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
985 985  )))
986 986  
987 987  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -989,9 +989,9 @@
989 989  
990 990  Steps to connect via fall back IP:
991 991  
992 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1227 +~1. Connect PC's Ethernet port to LG01's WAN port
993 993  
994 -2. Configure PC’s Ethernet port has
1229 +2. Configure PC's Ethernet port has
995 995   IP: 172.31.255.253 and
996 996   Netmask: 255.255.255.252
997 997  
... ... @@ -999,31 +999,44 @@
999 999  
1000 1000  [[image:1652435256286-879.png]]
1001 1001  
1002 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1237 +3. In the PC, use IP address 172.31.255.254 to access the LPS8N via Web or Console.
1003 1003  
1004 1004  Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1005 1005  
1006 1006  
1007 -= 11. Order Info =
1242 +== 10.4  I connect to the LPS8N's SSID but LPS8N didn't assign DHCP IP to my laptop? ==
1008 1008  
1009 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1244 +(((
1245 +This is a known bug for the firmware version before 2019-09-23 for LPS, the issue was fixed since version: LG02_LG08~-~-build-v5.2.1569218466-20190923-1402.
1246 +)))
1010 1010  
1248 +(((
1249 +In the old version, user can use the [[fall back ip method >>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]]to access and configure the device.
1250 +)))
1251 +
1252 +
1253 += 11.  Order Info =
1254 +
1255 +
1256 +(% style="color:#4f81bd" %)**//PART: LPS8N-XXX-YYY//: **
1257 +
1258 +
1011 1011  (% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1012 1012  
1013 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1014 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1261 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1262 +* (% style="color:red" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1015 1015  
1016 1016  (% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1017 1017  
1018 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1019 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1020 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1021 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1266 +* (% style="color:red" %)** EC25-E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1267 +* (% style="color:red" %)** EC25-A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1268 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1269 +* (% style="color:red" %)** EC25-J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1022 1022  
1023 1023  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1024 1024  
1025 1025  
1026 -= 12. Packing Info =
1274 += 12.  Packing Info =
1027 1027  
1028 1028  (((
1029 1029  **Package Includes**:
... ... @@ -1042,8 +1042,9 @@
1042 1042  * Package Size: 14.5 x 13.5 x 6 cm
1043 1043  * Weight: 300g
1044 1044  
1045 -= 13. Support =
1046 1046  
1294 += 13.  Support =
1295 +
1047 1047  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1048 1048  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1049 1049  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1657095412271-942.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
1657158986600-386.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657159323292-776.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.5 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +142.9 KB
Content
image-20220707112053-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +106.4 KB
Content
image-20220707112053-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0