Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 129.2 >
edited by Xiaoling
on 2022/07/06 16:06
To version < 95.1 >
edited by Xiaoling
on 2022/07/04 15:04
>
Change comment: Uploaded new attachment "1656918270059-192.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -18,40 +18,31 @@
18 18  
19 19  
20 20  
21 -(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
21 +(% style="color:inherit; font-family:inherit; font-size:29px" %)1. Introduction
22 22  
23 -== 1.1  What is the LPS8N ==
23 +== 1.1 What is the LPS8N ==
24 24  
25 25  
26 26  
27 -(((
28 28  The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 -)))
30 30  
31 -(((
32 32  The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
33 -)))
34 34  
35 -(((
36 36  LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
37 -)))
38 38  
39 -(((
40 40  LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 -)))
42 42  
35 +
43 43  (((
44 44  
45 45  )))
46 46  
47 -[[image:1656918270059-192.png]]
40 +[[image:1652411526195-923.png||height="494" width="731"]]
48 48  
42 +== 1.2 Specifications ==
49 49  
50 -== 1.2  Specifications ==
44 +**Hardware System:**
51 51  
52 -
53 -(% style="color:#037691" %)**Hardware System:**
54 -
55 55  (((
56 56   Linux Part:
57 57  )))
... ... @@ -60,17 +60,18 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -(% style="color:#037691" %)**Interface:**
54 +**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
66 66  * WiFi : 802.11 b/g/n
67 67  * LoRaWAN Wireless
68 -* Power Input: 5V DC, 2A, Type C
59 +* Power Input: 12 ~~ 24 V DC, 2 A
60 +* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
69 69  * USB 2.0 host connector x 1
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
73 -(% style="color:#037691" %)**WiFi Spec:**
65 +**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
76 76  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -83,9 +83,9 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
86 -(% style="color:#037691" %)**LoRa Spec:**
78 +**LoRa Spec:**
87 87  
88 -* Up to -140 dBm sensitivity
80 +* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
89 89  * 70 dB CW interferer rejection at 1 MHz offset
90 90  * Able to operate with negative SNR, CCR up to 9dB
91 91  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -94,118 +94,125 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
97 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
89 +**Cellular 4G LTE (optional):**
98 98  
99 -* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
100 -* Micro SIM Slot
101 -* External 4G Sticker Antenna.
91 +* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
92 +* Standard Size SIM Slot
93 +* 2 x 4G Sticker Antenna.
102 102  * Up to 150Mbps downlink and 50Mbps uplink data rates
103 103  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
98 +**Power over Ethernet:**
106 106  
107 -== 1.3  Features ==
100 +* IEEE 802.3af compliant.
101 +* Support wide input voltage range  37Vdc to 57Vdc.
102 +* Thermal cut off.
103 +* Short circuit protection.
104 +* Over current protection
105 +* Isolation level 4 KVrms.
106 +* Enhanced surge protection
108 108  
109 -* Open Source OpenWrt system
110 -* Managed by Web GUI, SSH via WAN or WiFi
111 -* Remote access with Reverse-SSH or remote.it
112 -* Emulates 49x LoRa demodulators
113 -* LoRaWAN Gateway
114 -* 10 programmable parallel demodulation paths
115 -* Pre-configure to support different LoRaWAN regional settings.
116 -* Allow to customize LoRaWAN regional parameters.
117 -* Support Local decode ABP end node info and transfer to MQTT server
118 -* Support different level log in.
119 -* Support Semtech Packet Forwarder
120 -* Support LoRaWAN basic station.
121 -* Optional 3G/4G cellular connection
108 +== 1.3 Features ==
122 122  
110 +* Open Source Embedded Linux system
111 +* Managed by Web GUI, SSH via LAN or WiFi
112 +* Support Semtech UDP packet forwarder
113 +* Support LoRaWAN Station Connection
114 +* Cellular Failover conntection(option)
115 +* Direct Communication to LoRaWAN ABP Node
116 +* LoRaWAN packet filtering
117 +* Far seeing LED indicator
118 +* Built-in GPS module for location & timing
119 +* External fiber glass antenna
120 +* Auto-Provision
121 +* Remote Monitoring
122 +* 802.3af PoE
123 +* IP65
124 +* Lighting Protection
125 +* Power Consumption:12v ,300-500mA
123 123  
124 -== 1.4  Hardware System Structure ==
127 +== 1.4 Hardware System Structure ==
125 125  
126 -[[image:1657079015096-949.png]]
129 +[[image:1652411641871-482.png||height="416" width="716"]]
127 127  
131 +== 1.5 DLOS8N Applications ==
128 128  
129 -== 1.5  LPS8N Applications ==
133 +[[image:1652411671209-920.png||height="618" width="650"]]
130 130  
131 -[[image:1657079055940-721.png]]
135 +== 1.6 LED Indicators ==
132 132  
137 +[[image:1652411720670-489.png]]
133 133  
134 -== 1.6  LED Indicators ==
135 135  
140 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
136 136  
137 -LPS8N has totally four LEDs, They are:
142 +(((
143 +(((
144 +* (((
145 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
146 +)))
147 +)))
138 138  
139 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
140 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
141 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
142 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
143 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
144 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
149 +* (((
150 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
151 +)))
152 +* (((
153 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
154 +)))
155 +)))
145 145  
146 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
157 +== 1.7 WiFi Direction ==
147 147  
159 +DLOS8N use directional WiFi Antenna. The best direction is as below:
148 148  
161 +[[image:1652412859663-161.png||height="341" width="333"]]
149 149  
163 += 2. Access and Configure DLOS8N =
150 150  
151 -= 2.  Access and Configure LPS8N =
165 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
152 152  
153 -(((
154 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
155 -)))
167 +== 2.1 Find IP address of DLOS8N ==
156 156  
169 +=== 2.1.1 Connect via WiFi ===
157 157  
158 -== 2.1  Find IP address of LPS8N ==
171 +[[image:1652412985720-934.png]]
159 159  
160 -=== 2.1.1  Connect via WiFi ===
173 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
161 161  
162 -[[image:1657085974260-168.png]]
163 -
164 -
165 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
166 -
167 167  [[image:1652413127647-377.png]]
168 168  
177 +(% style="background-color:#ffffcc" %)dragino+dragino
169 169  
170 170  (((
171 171  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
172 -
173 -
174 -
175 175  )))
176 176  
177 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
183 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
178 178  
179 -[[image:1657086105922-299.png]]
185 +[[image:1652414114583-532.png]]
180 180  
181 181  
182 182  (((
183 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
184 -
185 -
186 -
189 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
187 187  )))
188 188  
189 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
192 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
190 190  
191 -[[image:1657086192720-649.png]]
194 +[[image:1652414137639-956.png]]
192 192  
193 193  
194 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
197 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
195 195  
199 +=== 2.1.4 Connect via Ethernet with fall back ip ===
196 196  
201 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
197 197  
198 -=== 2.1.4  Connect via Ethernet with fall back ip ===
203 +== 2.2 Access Configure Web UI ==
199 199  
200 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
201 -
202 -
203 -
204 -== 2.2  Access Configure Web UI ==
205 -
206 206  **Web Interface**
207 207  
208 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
207 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
209 209  
210 210  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
211 211  
... ... @@ -214,7 +214,7 @@
214 214  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
215 215  
216 216  
217 -You will see the login interface of LPS8N as shown below.
216 +You will see the login interface of DLOS8N as shown below.
218 218  
219 219  The account details for Web Login are:
220 220  
... ... @@ -224,66 +224,50 @@
224 224  
225 225  [[image:1652414287022-223.png]]
226 226  
226 += 3. Typical Network Setup =
227 227  
228 +== 3.1 Overview ==
228 228  
229 -= 3.  Typical Network Setup =
230 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 230  
231 -== 3.1  Overview ==
232 -
233 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
234 -
235 235  * **WAN Port Internet Mode**
236 236  * **WiFi Client Mode**
237 237  * **WiFi AP Mode**
235 +* **Cellular Mode**
238 238  
237 +== 3.2 Use WAN port to access Internet ==
239 239  
240 -== 3.2  Use WAN port to access Internet ==
239 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
241 241  
242 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
241 +[[image:1652420169255-959.png]]
243 243  
243 +== 3.3 Access the Internet as a WiFi Client ==
244 244  
245 -[[image:1657088560833-398.png]]
246 -
247 -
248 -== 3.3  Access the Internet as a WiFi Client ==
249 -
250 250  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251 251  
252 252  (((
253 253  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
254 -
255 -[[image:1657088818095-182.png]]
256 256  )))
257 257  
251 +[[image:1652420327792-211.png]]
258 258  
259 259  (((
260 260  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
261 -
262 -
263 263  )))
264 264  
265 -== 3.4  Use built-in 4G modem for internet access ==
257 +== 3.4 Access the Internet via Cellular ==
266 266  
267 -(((
268 -(((
269 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
270 -)))
259 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
271 271  
272 -
273 273  (((
274 -First, install the Micro SIM card as below direction
262 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
275 275  )))
276 276  
277 -(((
278 -Second, Power off/ ON LPS8N to let it detect the SIM card.
279 -)))
280 -)))
265 +[[image:1652420606018-181.png]]
281 281  
282 282  
283 -[[image:1657090855037-497.png]]
284 -
285 285  (((
286 -
269 +[[image:1652420718132-929.png||height="427" width="727"]]
287 287  )))
288 288  
289 289  (((
... ... @@ -295,89 +295,78 @@
295 295  )))
296 296  
297 297  (((
298 -[[image:1657090932270-444.png]]
281 +[[image:1652421032117-341.png||height="329" width="752"]]
299 299  )))
300 300  
284 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
301 301  
302 -== 3.5  Check Internet connection ==
286 +== 3.5 Check Internet connection ==
303 303  
304 304  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
305 305  
306 306  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
291 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
292 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
309 309  
310 -[[image:1657091099235-452.png]]
294 +[[image:1652421351382-793.png||height="339" width="765"]]
311 311  
296 += 4. Example: Configure as a LoRaWAN gateway =
312 312  
298 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
313 313  
314 -= 4.  Example: Configure as a LoRaWAN gateway =
315 -
316 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
317 -
318 318  (((
319 -[[image:1657091257648-882.png]]
301 +[[image:image-20220513140429-1.png||height="565" width="824"]]
320 320  )))
321 321  
322 -(((
323 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 -)))
304 +This chapter describes how to use the DLOS8Nto work with
325 325  
306 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 326  
308 +== 4.1 Create a gateway in TTN V3 Server ==
327 327  
328 -== 4.1  Create a gateway in TTN V3 Server ==
329 -
330 330  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
331 331  
332 332  (((
333 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
313 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
334 334  )))
335 335  
336 336  (((
337 -[[image:1657091583941-544.png]]
317 +[[image:1652421929753-168.png||height="403" width="739"]]
338 338  )))
339 339  
340 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
320 +The example gateway id is: **a840411e96744154**
341 341  
342 -
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
346 346  
347 -[[image:1657091739530-531.png]]
326 +[[image:1652422127479-258.png||height="346" width="738"]]
348 348  
349 -
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 352  (((
353 -[[image:1657091719947-297.png]]
331 +[[image:1652422142236-792.png||height="356" width="737"]]
354 354  )))
355 355  
356 356  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
357 357  
336 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
337 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
338 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
339 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
358 358  
359 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
360 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
361 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
362 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 -
364 -
365 365  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
366 366  
367 -[[image:1657091941182-367.png]]
343 +[[image:1652422440891-514.png||height="360" width="747"]]
368 368  
369 369  Click the Gateway icon and then click Add gateway.
370 370  
371 -
372 372  Open the following page:
373 373  
349 + [[image:1652422470352-518.png||height="391" width="716"]]
374 374  
375 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
351 +[[image:1652422479876-297.png||height="398" width="729"]]
376 376  
377 -
378 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
379 -
380 -
381 381  (((
382 382  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
383 383  )))
... ... @@ -384,17 +384,16 @@
384 384  
385 385  After creating the gateway, you can see the gateway info, as below.
386 386  
387 -[[image:1657094130908-567.png]](% style="display:none" %)
359 +[[image:1652422509034-682.png||height="299" width="739"]]
388 388  
361 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
389 389  
390 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
391 -
392 392  (((
393 -You can now configure the LPS8N to let it connect to TTN network V3.
364 +You can now configure the DLOS8N to let it connect to TTN network V3.
394 394  )))
395 395  
396 396  (((
397 -Make sure your LPS8N has a working Internet Connection first.
368 +Make sure your DLOS8N has a working Internet Connection first.
398 398  )))
399 399  
400 400  (((
... ... @@ -401,35 +401,31 @@
401 401  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
402 402  )))
403 403  
404 -[[image:1657094183213-301.png]]
375 +[[image:1652422624783-580.png||height="327" width="729"]]
405 405  
406 406  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
407 407  
408 -
409 409  In the home page, we can see the LoRaWAN connection is ready now.
410 410  
411 -[[image:1657094202420-798.png]]
381 +[[image:1652422685063-596.png||height="327" width="729"]]
412 412  
413 -
414 414  In TTN v3 portal, we can also see the gateway is connected.
415 415  
416 -[[image:1657094221515-510.png]]
385 +[[image:1652422703020-955.png||height="343" width="730"]]
417 417  
387 +== 4.3 Configure frequency ==
418 418  
419 -== 4.3  Configure frequency ==
389 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
420 420  
421 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
391 +[[image:1652422737399-529.png||height="362" width="737"]]
422 422  
423 -[[image:1657094249818-468.png]]
424 424  
425 -
426 426  In logread page, user can check the frequency actually used.
427 427  
428 - [[image:1657094333704-207.png]]
396 + [[image:1652422763536-750.png||height="514" width="730"]]
429 429  
398 +== 4.4 Add a LoRaWAN End Device ==
430 430  
431 -== 4.4  Add a LoRaWAN End Device ==
432 -
433 433  (((
434 434  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
435 435  )))
... ... @@ -442,8 +442,6 @@
442 442  
443 443  (((
444 444  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
445 -
446 -
447 447  )))
448 448  
449 449  (((
... ... @@ -458,12 +458,10 @@
458 458  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
459 459  )))
460 460  
461 -[[image:1657094382177-591.png]]
426 +[[image:1652422840936-838.png]]
462 462  
463 463  (((
464 464  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
465 -
466 -
467 467  )))
468 468  
469 469  (((
... ... @@ -474,19 +474,16 @@
474 474  Select **Add Application** to open the screen below.
475 475  )))
476 476  
477 -[[image:1657094417175-831.png]]
440 +[[image:1652422946999-255.png||height="356" width="744"]]
478 478  
479 479  Open the **Application **select** Add end device**
480 480  
481 -
482 482  Start Register the end device
483 483  
484 -[[image:1657094444802-101.png]]
446 +[[image:1652422975885-591.png||height="359" width="726"]]
485 485  
486 486  (((
487 487  Select OTAA activation mode
488 -
489 -
490 490  )))
491 491  
492 492  (((
... ... @@ -493,22 +493,18 @@
493 493  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
494 494  )))
495 495  
496 -[[image:1657094475730-208.png]]
456 +[[image:1652422998005-968.png||height="352" width="744"]]
497 497  
498 498  First, input the End device ID, AppEUI and DevEUI.
499 499  
460 +[[image:1652423022781-339.png||height="365" width="741"]]
500 500  
501 -[[image:1657094646429-966.png]]
502 -
503 503  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
504 504  
464 +[[image:1652423046741-467.png||height="355" width="736"]]
505 505  
506 -[[image:1657094674045-755.png]]
507 -
508 508  (((
509 509  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
510 -
511 -
512 512  )))
513 513  
514 514  (((
... ... @@ -519,9 +519,8 @@
519 519  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
520 520  )))
521 521  
522 -[[image:1657094791060-639.png]]
478 +[[image:1652423277549-324.png||height="273" width="745"]]
523 523  
524 -
525 525  = 5. Web Configure Pages =
526 526  
527 527  == 5.1 Home ==
1657079015096-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
1657079055940-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -214.1 KB
Content
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.9 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0