Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 128.1 >
edited by Xiaoling
on 2022/07/06 16:04
To version < 80.14 >
edited by Xiaoling
on 2022/05/31 11:53
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N - LoRaWAN Gateway User Manual
1 +DLOS8N Outdoor LoRaWAN Gateway
Content
... ... @@ -1,57 +1,48 @@
1 1  (% style="text-align:center" %)
2 -[[image:1656917428377-954.png||height="475" width="475"]]
2 +[[image:1652409757234-446.png||height="399" width="399"]]
3 3  
4 4  
5 5  
6 +**DLOS8N Outdoor LoRaWAN Gateway User Manual**
6 6  
8 +
7 7  **Table of Contents：**
8 8  
11 +{{toc/}}
9 9  
10 10  
11 11  
12 12  
16 += 1. Introduction =
13 13  
18 +== 1.1 What is the DLOS8N ==
14 14  
15 -
16 -
17 -
18 -
19 -
20 -
21 -(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
22 -
23 -== 1.1  What is the LPS8N ==
24 -
25 -
26 -
27 27  (((
28 -The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
21 +The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 29  )))
30 30  
31 31  (((
32 -The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
25 +DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
33 33  )))
34 34  
35 35  (((
36 -LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
29 +DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
37 37  )))
38 38  
39 39  (((
40 -LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
33 +DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 41  )))
42 42  
43 43  (((
44 -
37 +DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
45 45  )))
46 46  
47 -[[image:1656918270059-192.png]]
40 +[[image:1652411526195-923.png||height="494" width="731"]]
48 48  
42 +== 1.2 Specifications ==
49 49  
50 -== 1.2  Specifications ==
44 +**Hardware System:**
51 51  
52 -
53 -(% style="color:#037691" %)**Hardware System:**
54 -
55 55  (((
56 56   Linux Part:
57 57  )))
... ... @@ -60,17 +60,18 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -(% style="color:#037691" %)**Interface:**
54 +**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
66 66  * WiFi : 802.11 b/g/n
67 67  * LoRaWAN Wireless
68 -* Power Input: 5V DC, 2A, Type C
59 +* Power Input: 12 ~~ 24 V DC, 2 A
60 +* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
69 69  * USB 2.0 host connector x 1
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
73 -(% style="color:#037691" %)**WiFi Spec:**
65 +**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
76 76  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -83,9 +83,9 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
86 -(% style="color:#037691" %)**LoRa Spec:**
78 +**LoRa Spec:**
87 87  
88 -* Up to -140 dBm sensitivity
80 +* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
89 89  * 70 dB CW interferer rejection at 1 MHz offset
90 90  * Able to operate with negative SNR, CCR up to 9dB
91 91  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -94,117 +94,125 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
97 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
89 +**Cellular 4G LTE (optional):**
98 98  
99 -* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
100 -* Micro SIM Slot
101 -* External 4G Sticker Antenna.
91 +* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
92 +* Standard Size SIM Slot
93 +* 2 x 4G Sticker Antenna.
102 102  * Up to 150Mbps downlink and 50Mbps uplink data rates
103 103  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
98 +**Power over Ethernet:**
106 106  
100 +* IEEE 802.3af compliant.
101 +* Support wide input voltage range  37Vdc to 57Vdc.
102 +* Thermal cut off.
103 +* Short circuit protection.
104 +* Over current protection
105 +* Isolation level 4 KVrms.
106 +* Enhanced surge protection
107 107  
108 -== 1.3  Features ==
108 +== 1.3 Features ==
109 109  
110 -* Open Source OpenWrt system
111 -* Managed by Web GUI, SSH via WAN or WiFi
112 -* Remote access with Reverse-SSH or remote.it
113 -* Emulates 49x LoRa demodulators
114 -* LoRaWAN Gateway
115 -* 10 programmable parallel demodulation paths
116 -* Pre-configure to support different LoRaWAN regional settings.
117 -* Allow to customize LoRaWAN regional parameters.
118 -* Support Local decode ABP end node info and transfer to MQTT server
119 -* Support different level log in.
120 -* Support Semtech Packet Forwarder
121 -* Support LoRaWAN basic station.
122 -* Optional 3G/4G cellular connection
110 +* Open Source Embedded Linux system
111 +* Managed by Web GUI, SSH via LAN or WiFi
112 +* Support Semtech UDP packet forwarder
113 +* Support LoRaWAN Station Connection
114 +* Cellular Failover conntection(option)
115 +* Direct Communication to LoRaWAN ABP Node
116 +* LoRaWAN packet filtering
117 +* Far seeing LED indicator
118 +* Built-in GPS module for location & timing
119 +* External fiber glass antenna
120 +* Auto-Provision
121 +* Remote Monitoring
122 +* 802.3af PoE
123 +* IP65
124 +* Lighting Protection
125 +* Power Consumption:12v ,300-500mA
123 123  
127 +== 1.4 Hardware System Structure ==
124 124  
129 +[[image:1652411641871-482.png||height="416" width="716"]]
125 125  
126 -== 1.4  Hardware System Structure ==
131 +== 1.5 DLOS8N Applications ==
127 127  
128 -[[image:1657079015096-949.png]]
133 +[[image:1652411671209-920.png||height="618" width="650"]]
129 129  
135 +== 1.6 LED Indicators ==
130 130  
131 -== 1.5  LPS8N Applications ==
137 +[[image:1652411720670-489.png]]
132 132  
133 -[[image:1657079055940-721.png]]
134 134  
140 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
135 135  
136 -== 1.6  LED Indicators ==
142 +(((
143 +(((
144 +* (((
145 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
146 +)))
147 +)))
137 137  
149 +* (((
150 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
151 +)))
152 +* (((
153 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
154 +)))
155 +)))
138 138  
139 -LPS8N has totally four LEDs, They are:
157 +== 1.7 WiFi Direction ==
140 140  
141 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
142 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
143 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
144 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
145 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
146 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
159 +DLOS8N use directional WiFi Antenna. The best direction is as below:
147 147  
148 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
161 +[[image:1652412859663-161.png||height="341" width="333"]]
149 149  
150 -= 2.  Access and Configure LPS8N =
163 += 2. Access and Configure DLOS8N =
151 151  
152 -(((
153 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
154 -)))
165 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
155 155  
167 +== 2.1 Find IP address of DLOS8N ==
156 156  
157 -== 2.1  Find IP address of LPS8N ==
169 +=== 2.1.1 Connect via WiFi ===
158 158  
159 -=== 2.1.1  Connect via WiFi ===
171 +[[image:1652412985720-934.png]]
160 160  
161 -[[image:1657085974260-168.png]]
173 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
162 162  
163 -
164 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
165 -
166 166  [[image:1652413127647-377.png]]
167 167  
177 +(% style="background-color:#ffffcc" %)dragino+dragino
168 168  
169 169  (((
170 170  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
171 -
172 -
173 -
174 174  )))
175 175  
176 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
183 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
177 177  
178 -[[image:1657086105922-299.png]]
185 +[[image:1652414114583-532.png]]
179 179  
180 180  
181 181  (((
182 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
183 -
184 -
185 -
189 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
186 186  )))
187 187  
188 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
192 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
189 189  
190 -[[image:1657086192720-649.png]]
194 +[[image:1652414137639-956.png]]
191 191  
192 192  
193 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
197 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
194 194  
199 +=== 2.1.4 Connect via Ethernet with fall back ip ===
195 195  
201 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
196 196  
197 -=== 2.1.4  Connect via Ethernet with fall back ip ===
203 +== 2.2 Access Configure Web UI ==
198 198  
199 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
200 -
201 -
202 -
203 -== 2.2  Access Configure Web UI ==
204 -
205 205  **Web Interface**
206 206  
207 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
207 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
208 208  
209 209  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
210 210  
... ... @@ -213,7 +213,7 @@
213 213  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
214 214  
215 215  
216 -You will see the login interface of LPS8N as shown below.
216 +You will see the login interface of DLOS8N as shown below.
217 217  
218 218  The account details for Web Login are:
219 219  
... ... @@ -223,67 +223,50 @@
223 223  
224 224  [[image:1652414287022-223.png]]
225 225  
226 += 3. Typical Network Setup =
226 226  
228 +== 3.1 Overview ==
227 227  
228 -= 3.  Typical Network Setup =
230 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
229 229  
230 -== 3.1  Overview ==
231 -
232 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
233 -
234 234  * **WAN Port Internet Mode**
235 235  * **WiFi Client Mode**
236 236  * **WiFi AP Mode**
235 +* **Cellular Mode**
237 237  
237 +== 3.2 Use WAN port to access Internet ==
238 238  
239 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 239  
240 -== 3.2  Use WAN port to access Internet ==
241 +[[image:1652420169255-959.png]]
241 241  
242 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
243 +== 3.3 Access the Internet as a WiFi Client ==
243 243  
244 -
245 -[[image:1657088560833-398.png]]
246 -
247 -
248 -== 3.3  Access the Internet as a WiFi Client ==
249 -
250 250  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251 251  
252 252  (((
253 253  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
254 -
255 -[[image:1657088818095-182.png]]
256 256  )))
257 257  
251 +[[image:1652420327792-211.png]]
258 258  
259 259  (((
260 260  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
261 -
262 -
263 263  )))
264 264  
265 -== 3.4  Use built-in 4G modem for internet access ==
257 +== 3.4 Access the Internet via Cellular ==
266 266  
267 -(((
268 -(((
269 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
270 -)))
259 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
271 271  
272 -
273 273  (((
274 -First, install the Micro SIM card as below direction
262 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
275 275  )))
276 276  
277 -(((
278 -Second, Power off/ ON LPS8N to let it detect the SIM card.
279 -)))
280 -)))
265 +[[image:1652420606018-181.png]]
281 281  
282 282  
283 -[[image:1657090855037-497.png]]
284 -
285 285  (((
286 -
269 +[[image:1652420718132-929.png||height="427" width="727"]]
287 287  )))
288 288  
289 289  (((
... ... @@ -295,90 +295,78 @@
295 295  )))
296 296  
297 297  (((
298 -[[image:1657090932270-444.png]]
281 +[[image:1652421032117-341.png||height="329" width="752"]]
299 299  )))
300 300  
284 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
301 301  
302 -== 3.5  Check Internet connection ==
286 +== 3.5 Check Internet connection ==
303 303  
304 304  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
305 305  
306 306  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
291 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
292 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
309 309  
310 -[[image:1657091099235-452.png]]
294 +[[image:1652421351382-793.png||height="339" width="765"]]
311 311  
296 += 4. Example: Configure as a LoRaWAN gateway =
312 312  
298 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
313 313  
314 -= 4.  Example: Configure as a LoRaWAN gateway =
315 -
316 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
317 -
318 318  (((
319 -[[image:1657091257648-882.png]]
301 +[[image:image-20220513140429-1.png||height="565" width="824"]]
320 320  )))
321 321  
322 -(((
323 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 -)))
304 +This chapter describes how to use the DLOS8Nto work with
325 325  
306 +TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 326  
308 +== 4.1 Create a gateway in TTN V3 Server ==
327 327  
328 -== 4.1  Create a gateway in TTN V3 Server ==
329 -
330 330  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
331 331  
332 332  (((
333 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
313 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
334 334  )))
335 335  
336 336  (((
337 -[[image:1657091583941-544.png]]
317 +[[image:1652421929753-168.png||height="403" width="739"]]
338 338  )))
339 339  
340 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
320 +The example gateway id is: **a840411e96744154**
341 341  
342 -
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
346 346  
347 -[[image:1657091739530-531.png]]
326 +[[image:1652422127479-258.png||height="346" width="738"]]
348 348  
349 -
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 352  (((
353 -[[image:1657091719947-297.png]]
331 +[[image:1652422142236-792.png||height="356" width="737"]]
354 354  )))
355 355  
356 356  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
357 357  
336 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
337 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
338 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
339 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
358 358  
359 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
360 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
361 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
362 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 -
364 -
365 -
366 366  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
367 367  
368 -[[image:1657091941182-367.png]]
343 +[[image:1652422440891-514.png||height="360" width="747"]]
369 369  
370 370  Click the Gateway icon and then click Add gateway.
371 371  
372 -
373 373  Open the following page:
374 374  
349 + [[image:1652422470352-518.png||height="391" width="716"]]
375 375  
376 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
351 +[[image:1652422479876-297.png||height="398" width="729"]]
377 377  
378 -
379 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
380 -
381 -
382 382  (((
383 383  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
384 384  )))
... ... @@ -385,17 +385,16 @@
385 385  
386 386  After creating the gateway, you can see the gateway info, as below.
387 387  
388 -[[image:1657094130908-567.png]](% style="display:none" %)
359 +[[image:1652422509034-682.png||height="299" width="739"]]
389 389  
361 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
390 390  
391 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
392 -
393 393  (((
394 -You can now configure the LPS8N to let it connect to TTN network V3.
364 +You can now configure the DLOS8N to let it connect to TTN network V3.
395 395  )))
396 396  
397 397  (((
398 -Make sure your LPS8N has a working Internet Connection first.
368 +Make sure your DLOS8N has a working Internet Connection first.
399 399  )))
400 400  
401 401  (((
... ... @@ -402,35 +402,31 @@
402 402  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
403 403  )))
404 404  
405 -[[image:1657094183213-301.png]]
375 +[[image:1652422624783-580.png||height="327" width="729"]]
406 406  
407 407  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
408 408  
409 -
410 410  In the home page, we can see the LoRaWAN connection is ready now.
411 411  
412 -[[image:1657094202420-798.png]]
381 +[[image:1652422685063-596.png||height="327" width="729"]]
413 413  
414 -
415 415  In TTN v3 portal, we can also see the gateway is connected.
416 416  
417 -[[image:1657094221515-510.png]]
385 +[[image:1652422703020-955.png||height="343" width="730"]]
418 418  
387 +== 4.3 Configure frequency ==
419 419  
420 -== 4.3  Configure frequency ==
389 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
421 421  
422 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
391 +[[image:1652422737399-529.png||height="362" width="737"]]
423 423  
424 -[[image:1657094249818-468.png]]
425 425  
426 -
427 427  In logread page, user can check the frequency actually used.
428 428  
429 - [[image:1657094333704-207.png]]
396 + [[image:1652422763536-750.png||height="514" width="730"]]
430 430  
398 +== 4.4 Add a LoRaWAN End Device ==
431 431  
432 -== 4.4  Add a LoRaWAN End Device ==
433 -
434 434  (((
435 435  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
436 436  )))
... ... @@ -443,8 +443,6 @@
443 443  
444 444  (((
445 445  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
446 -
447 -
448 448  )))
449 449  
450 450  (((
... ... @@ -455,17 +455,14 @@
455 455  * APP EUI - ID code for an Application defined in TTN v3.
456 456  * APP Key - Unique key to secure communications with a particular device.
457 457  
458 -
459 459  (((
460 460  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
461 461  )))
462 462  
463 -[[image:1657094382177-591.png]]
426 +[[image:1652422840936-838.png]]
464 464  
465 465  (((
466 466  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
467 -
468 -
469 469  )))
470 470  
471 471  (((
... ... @@ -476,19 +476,16 @@
476 476  Select **Add Application** to open the screen below.
477 477  )))
478 478  
479 -[[image:1657094417175-831.png]]
440 +[[image:1652422946999-255.png||height="356" width="744"]]
480 480  
481 481  Open the **Application **select** Add end device**
482 482  
483 -
484 484  Start Register the end device
485 485  
486 -[[image:1657094444802-101.png]]
446 +[[image:1652422975885-591.png||height="359" width="726"]]
487 487  
488 488  (((
489 489  Select OTAA activation mode
490 -
491 -
492 492  )))
493 493  
494 494  (((
... ... @@ -495,12 +495,12 @@
495 495  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
496 496  )))
497 497  
498 -[[image:1657094475730-208.png]]
456 +[[image:1652422998005-968.png||height="352" width="744"]]
499 499  
500 500  First, input the End device ID, AppEUI and DevEUI.
501 501  
460 +[[image:1652423022781-339.png||height="365" width="741"]]
502 502  
503 -
504 504  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
505 505  
506 506  [[image:1652423046741-467.png||height="355" width="736"]]
... ... @@ -755,24 +755,10 @@
755 755  
756 756  === 5.6.1 LogRead ~-~-> LoRa Log ===
757 757  
716 +[[image:1652430356784-567.png||height="325" width="730"]]
758 758  
759 759  Show the frequency for LoRa Radio and traffics.
760 760  
761 -[[image:image-20220615204306-1.png||height="575" width="733"]]
762 -
763 -
764 -Show the IoT Server Connection State and FWD State
765 -
766 -[[image:image-20220616083933-1.png||height="556" width="729"]]
767 -
768 -DLOS8 can view GPS location in the Logread FWD State
769 -
770 -
771 -Show the Error logs, RxTxJson lorawan packages, and PULL State
772 -
773 -[[image:image-20220615205416-6.png||height="442" width="884"]]
774 -
775 -
776 776  === 5.6.2 LogRead ~-~-> System Log ===
777 777  
778 778  Show the system log
... ... @@ -1041,7 +1041,7 @@
1041 1041  
1042 1042  = 13. Support =
1043 1043  
1044 -* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
988 +* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1045 1045  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1046 1046  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1047 1047  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1656917428377-954.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.7 KB
Content
1656918270059-192.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657079015096-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
1657079055940-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -214.1 KB
Content
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.3 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0