Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 127.1 >
edited by Xiaoling
on 2022/07/06 16:04
To version < 77.1 >
edited by Xiaoling
on 2022/05/13 18:11
>
Change comment: Uploaded new attachment "1652436705761-420.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N - LoRaWAN Gateway User Manual
1 +DLOS8N
Content
... ... @@ -1,57 +1,51 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1656917428377-954.png||height="475" width="475"]]
4 +[[image:1652409757234-446.png||height="399" width="399"]]
3 3  
4 4  
5 5  
8 +**DLOS8N Outdoor LoRaWAN Gateway User Manual**
6 6  
10 +
7 7  **Table of Contents：**
8 8  
13 +{{toc/}}
9 9  
10 10  
11 11  
12 12  
18 += 1. Introduction =
13 13  
20 +== 1.1 What is the DLOS8N ==
14 14  
15 -
16 -
17 -
18 -
19 -
20 -
21 -(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
22 -
23 -== 1.1  What is the LPS8N ==
24 -
25 -
26 -
27 27  (((
28 -The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
23 +The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 29  )))
30 30  
31 31  (((
32 -The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
27 +DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
33 33  )))
34 34  
35 35  (((
36 -LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
31 +DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
37 37  )))
38 38  
39 39  (((
40 -LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
35 +DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 41  )))
42 42  
43 43  (((
44 -
39 +DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
45 45  )))
46 46  
47 -[[image:1656918270059-192.png]]
42 +[[image:1652411526195-923.png]]
48 48  
49 49  
50 -== 1.2  Specifications ==
45 +== 1.2 Specifications ==
51 51  
47 +**Hardware System:**
52 52  
53 -(% style="color:#037691" %)**Hardware System:**
54 -
55 55  (((
56 56   Linux Part:
57 57  )))
... ... @@ -60,17 +60,18 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -(% style="color:#037691" %)**Interface:**
57 +**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
66 66  * WiFi : 802.11 b/g/n
67 67  * LoRaWAN Wireless
68 -* Power Input: 5V DC, 2A, Type C
62 +* Power Input: 12 ~~ 24 V DC, 2 A
63 +* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
69 69  * USB 2.0 host connector x 1
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
73 -(% style="color:#037691" %)**WiFi Spec:**
68 +**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
76 76  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -83,9 +83,9 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
86 -(% style="color:#037691" %)**LoRa Spec:**
81 +**LoRa Spec:**
87 87  
88 -* Up to -140 dBm sensitivity
83 +* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
89 89  * 70 dB CW interferer rejection at 1 MHz offset
90 90  * Able to operate with negative SNR, CCR up to 9dB
91 91  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -94,117 +94,132 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
97 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
92 +**Cellular 4G LTE (optional):**
98 98  
99 -* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
100 -* Micro SIM Slot
101 -* External 4G Sticker Antenna.
94 +* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
95 +* Standard Size SIM Slot
96 +* 2 x 4G Sticker Antenna.
102 102  * Up to 150Mbps downlink and 50Mbps uplink data rates
103 103  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
101 +**Power over Ethernet:**
106 106  
103 +* IEEE 802.3af compliant.
104 +* Support wide input voltage range  37Vdc to 57Vdc.
105 +* Thermal cut off.
106 +* Short circuit protection.
107 +* Over current protection
108 +* Isolation level 4 KVrms.
109 +* Enhanced surge protection
107 107  
108 -== 1.3  Features ==
111 +== 1.3 Features ==
109 109  
110 -* Open Source OpenWrt system
111 -* Managed by Web GUI, SSH via WAN or WiFi
112 -* Remote access with Reverse-SSH or remote.it
113 -* Emulates 49x LoRa demodulators
114 -* LoRaWAN Gateway
115 -* 10 programmable parallel demodulation paths
116 -* Pre-configure to support different LoRaWAN regional settings.
117 -* Allow to customize LoRaWAN regional parameters.
118 -* Support Local decode ABP end node info and transfer to MQTT server
119 -* Support different level log in.
120 -* Support Semtech Packet Forwarder
121 -* Support LoRaWAN basic station.
122 -* Optional 3G/4G cellular connection
113 +* Open Source Embedded Linux system
114 +* Managed by Web GUI, SSH via LAN or WiFi
115 +* Support Semtech UDP packet forwarder
116 +* Support LoRaWAN Station Connection
117 +* Cellular Failover conntection(option)
118 +* Direct Communication to LoRaWAN ABP Node
119 +* LoRaWAN packet filtering
120 +* Far seeing LED indicator
121 +* Built-in GPS module for location & timing
122 +* External fiber glass antenna
123 +* Auto-Provision
124 +* Remote Monitoring
125 +* 802.3af PoE
126 +* IP65
127 +* Lighting Protection
128 +* Power Consumption:12v ,300-500mA
123 123  
130 +== 1.4 Hardware System Structure ==
124 124  
132 +[[image:1652411641871-482.png||height="416" width="716"]]
125 125  
126 -== 1.4  Hardware System Structure ==
127 127  
128 -[[image:1657079015096-949.png]]
135 +== 1.5 DLOS8N Applications ==
129 129  
137 +[[image:1652411671209-920.png||height="618" width="650"]]
130 130  
131 -== 1.5  LPS8N Applications ==
132 132  
133 -[[image:1657079055940-721.png]]
140 +== 1.6 LED Indicators ==
134 134  
142 +[[image:1652411720670-489.png]]
135 135  
136 -== 1.6  LED Indicators ==
137 137  
145 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
138 138  
139 -LPS8N has totally four LEDs, They are:
147 +(((
148 +(((
149 +* (((
150 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
151 +)))
152 +)))
140 140  
141 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
142 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
143 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
144 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
145 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
146 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
154 +* (((
155 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
156 +)))
157 +* (((
158 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
159 +)))
160 +)))
147 147  
148 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
149 149  
150 -= 2.  Access and Configure LPS8N =
163 +== 1.7 WiFi Direction ==
151 151  
152 -(((
153 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
154 -)))
165 +DLOS8N use directional WiFi Antenna. The best direction is as below:
155 155  
167 +[[image:1652412859663-161.png||height="341" width="333"]]
156 156  
157 -== 2.1  Find IP address of LPS8N ==
158 158  
159 -=== 2.1.1  Connect via WiFi ===
170 += 2. Access and Configure DLOS8N =
160 160  
161 -[[image:1657085974260-168.png]]
172 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
162 162  
174 +== 2.1 Find IP address of DLOS8N ==
163 163  
164 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
176 +=== 2.1.1 Connect via WiFi ===
165 165  
178 +[[image:1652412985720-934.png]]
179 +
180 +
181 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
182 +
166 166  [[image:1652413127647-377.png]]
167 167  
185 +(% style="background-color:#ffffcc" %)dragino+dragino
168 168  
169 169  (((
170 170  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
171 -
172 -
173 -
174 174  )))
175 175  
176 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
177 177  
178 -[[image:1657086105922-299.png]]
192 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
179 179  
194 +[[image:1652414114583-532.png]]
180 180  
181 -(((
182 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
183 183  
197 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
184 184  
185 -
186 -)))
187 187  
188 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
200 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
189 189  
190 -[[image:1657086192720-649.png]]
202 +[[image:1652414137639-956.png]]
191 191  
192 192  
193 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
205 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
194 194  
195 195  
208 +=== 2.1.4 Connect via Ethernet with fall back ip ===
196 196  
197 -=== 2.1.4  Connect via Ethernet with fall back ip ===
210 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
198 198  
199 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
200 200  
213 +== 2.2 Access Configure Web UI ==
201 201  
202 -
203 -== 2.2  Access Configure Web UI ==
204 -
205 205  **Web Interface**
206 206  
207 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
217 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
208 208  
209 209  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
210 210  
... ... @@ -213,7 +213,7 @@
213 213  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
214 214  
215 215  
216 -You will see the login interface of LPS8N as shown below.
226 +You will see the login interface of DLOS8N as shown below.
217 217  
218 218  The account details for Web Login are:
219 219  
... ... @@ -225,119 +225,91 @@
225 225  
226 226  
227 227  
228 -= 3.  Typical Network Setup =
229 229  
230 -== 3.1  Overview ==
239 += 3. Typical Network Setup =
231 231  
232 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
241 +== 3.1 Overview ==
233 233  
243 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
244 +
234 234  * **WAN Port Internet Mode**
235 235  * **WiFi Client Mode**
236 236  * **WiFi AP Mode**
248 +* **Cellular Mode**
237 237  
250 +== 3.2 Use WAN port to access Internet ==
238 238  
252 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 239  
240 -== 3.2  Use WAN port to access Internet ==
254 +[[image:1652420169255-959.png]]
241 241  
242 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
243 243  
257 +== 3.3 Access the Internet as a WiFi Client ==
244 244  
245 -[[image:1657088560833-398.png]]
246 -
247 -
248 -== 3.3  Access the Internet as a WiFi Client ==
249 -
250 250  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251 251  
252 -(((
253 253  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
254 254  
255 -[[image:1657088818095-182.png]]
256 -)))
263 +[[image:1652420327792-211.png]]
257 257  
258 258  
259 -(((
260 260  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
261 261  
262 -
263 -)))
264 264  
265 -== 3.4  Use built-in 4G modem for internet access ==
269 +== 3.4 Access the Internet via Cellular ==
266 266  
267 -(((
268 -(((
269 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
270 -)))
271 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
271 271  
272 272  
273 -(((
274 -First, install the Micro SIM card as below direction
275 -)))
274 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
276 276  
277 -(((
278 -Second, Power off/ ON LPS8N to let it detect the SIM card.
279 -)))
280 -)))
276 +[[image:1652420606018-181.png]]
281 281  
282 282  
283 -[[image:1657090855037-497.png]]
279 +[[image:1652420718132-929.png||height="450" width="766"]]
284 284  
285 -(((
286 -
287 -)))
288 288  
289 -(((
290 290  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
291 -)))
292 292  
293 -(((
284 +
294 294  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
295 -)))
296 296  
297 -(((
298 -[[image:1657090932270-444.png]]
299 -)))
287 +[[image:1652421032117-341.png||height="329" width="752"]]
300 300  
289 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
301 301  
302 -== 3.5  Check Internet connection ==
303 303  
292 +== 3.5 Check Internet connection ==
293 +
304 304  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
305 305  
306 -* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
296 +* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
297 +* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
298 +* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
309 309  
310 -[[image:1657091099235-452.png]]
300 +[[image:1652421351382-793.png||height="339" width="765"]]
311 311  
312 312  
303 += 4. Example: Configure as a LoRaWAN gateway =
313 313  
314 -= 4.  Example: Configure as a LoRaWAN gateway =
305 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
315 315  
316 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
307 +[[image:image-20220513140429-1.png||height="565" width="824"]]
317 317  
318 -(((
319 -[[image:1657091257648-882.png]]
320 -)))
309 +This chapter describes how to use the DLOS8Nto work with
321 321  
322 -(((
323 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 -)))
311 +[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
325 325  
326 326  
314 +== 4.1 Create a gateway in TTN V3 Server ==
327 327  
328 -== 4.1  Create a gateway in TTN V3 Server ==
329 -
330 330  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
331 331  
332 -(((
333 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
334 -)))
318 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 335  
336 -(((
337 -[[image:1657091583941-544.png]]
338 -)))
320 +[[image:1652421929753-168.png||height="403" width="739"]]
339 339  
340 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
322 +The example gateway id is: a840411e96744154
341 341  
342 342  
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
... ... @@ -344,181 +344,133 @@
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
346 346  
347 -[[image:1657091739530-531.png]]
329 +[[image:1652422127479-258.png||height="346" width="738"]]
348 348  
349 349  
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 -(((
353 -[[image:1657091719947-297.png]]
354 -)))
334 +[[image:1652422142236-792.png||height="356" width="737"]]
355 355  
336 +
356 356  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
357 357  
339 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
340 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
341 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
342 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
358 358  
359 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
360 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
361 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
362 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 -
364 -
365 -
366 366  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
367 367  
368 -[[image:1657091941182-367.png]]
346 +[[image:1652422440891-514.png||height="360" width="747"]]
369 369  
370 370  Click the Gateway icon and then click Add gateway.
371 371  
372 -
373 373  Open the following page:
374 374  
352 + [[image:1652422470352-518.png||height="391" width="716"]]
375 375  
376 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
354 +[[image:1652422479876-297.png||height="398" width="729"]]
377 377  
378 -
379 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
380 -
381 -
382 -(((
383 383  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
384 -)))
385 385  
386 386  After creating the gateway, you can see the gateway info, as below.
387 387  
388 -[[image:1657094130908-567.png]](% style="display:none" %)
360 +[[image:1652422509034-682.png||height="299" width="739"]]
389 389  
390 390  
391 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
363 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
392 392  
393 -(((
394 -You can now configure the LPS8N to let it connect to TTN network V3.
395 -)))
365 +You can now configure the DLOS8N to let it connect to TTN network V3.
396 396  
397 -(((
398 -Make sure your LPS8N has a working Internet Connection first.
399 -)))
367 +Make sure your DLOS8N has a working Internet Connection first.
400 400  
401 -(((
402 402  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
403 -)))
404 404  
405 -[[image:1657094183213-301.png]]
371 +[[image:1652422624783-580.png||height="327" width="729"]]
406 406  
407 407  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
408 408  
409 -
410 410  In the home page, we can see the LoRaWAN connection is ready now.
411 411  
412 -[[image:1657094202420-798.png]]
377 +[[image:1652422685063-596.png||height="327" width="729"]]
413 413  
414 -
415 415  In TTN v3 portal, we can also see the gateway is connected.
416 416  
417 -[[image:1657094221515-510.png]]
381 +[[image:1652422703020-955.png||height="343" width="730"]]
418 418  
419 419  
420 -== 4.3  Configure frequency ==
384 +== 4.3 Configure frequency ==
421 421  
422 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
386 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
423 423  
424 -[[image:1657094249818-468.png]]
388 +[[image:1652422737399-529.png||height="362" width="737"]]
425 425  
426 426  
427 427  In logread page, user can check the frequency actually used.
428 428  
429 - [[image:1657094333704-207.png]]
393 + [[image:1652422763536-750.png||height="514" width="730"]]
430 430  
431 431  
432 -== 4.4  Add a LoRaWAN End Device ==
396 +4.4 Add a LoRaWAN End Device
433 433  
434 -(((
435 435  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
436 -)))
437 437  
438 -(((
439 439  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
440 -)))
441 441  
442 442  [[image:1652422794767-871.png]]
443 443  
444 -(((
445 445  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
446 446  
447 -
448 -)))
449 -
450 -(((
451 451  Three codes are required to define the device in TTN v3:
452 -)))
453 453  
454 454  * DEV EUI - Unique ID code for a particular device.
455 455  * APP EUI - ID code for an Application defined in TTN v3.
456 456  * APP Key - Unique key to secure communications with a particular device.
457 457  
458 -
459 -(((
460 460  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
461 -)))
462 462  
463 -[[image:1657094382177-591.png]]
414 +[[image:1652422840936-838.png]]
464 464  
465 -(((
416 +
466 466  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
467 467  
468 -
469 -)))
470 -
471 -(((
472 472  For the TTN v3 server, you can use the codes set in the device as in the following example.
473 -)))
474 474  
475 -(((
476 476  Select **Add Application** to open the screen below.
477 -)))
478 478  
479 -[[image:1657094417175-831.png]]
423 +[[image:1652422946999-255.png||height="356" width="744"]]
480 480  
481 481  Open the **Application **select** Add end device**
482 482  
483 -
484 484  Start Register the end device
485 485  
486 -[[image:1657094444802-101.png]]
429 +[[image:1652422975885-591.png||height="359" width="726"]]
487 487  
488 -(((
489 489  Select OTAA activation mode
490 490  
491 -
492 -)))
493 493  
494 -(((
495 495  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
496 -)))
497 497  
498 -[[image:1657094475730-208.png]]
436 +[[image:1652422998005-968.png||height="352" width="744"]]
499 499  
500 500  First, input the End device ID, AppEUI and DevEUI.
501 501  
440 +[[image:1652423022781-339.png||height="365" width="741"]]
502 502  
503 -
504 504  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
505 505  
506 506  [[image:1652423046741-467.png||height="355" width="736"]]
507 507  
508 -(((
509 509  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
510 -)))
511 511  
512 -(((
448 +
513 513  (% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
514 -)))
515 515  
516 -(((
517 517  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
518 -)))
519 519  
520 520  [[image:1652423277549-324.png||height="273" width="745"]]
521 521  
455 +
522 522  = 5. Web Configure Pages =
523 523  
524 524  == 5.1 Home ==
... ... @@ -527,43 +527,39 @@
527 527  
528 528  [[image:1652423418568-752.png||height="329" width="724"]]
529 529  
464 +
530 530  == 5.2 LoRa Settings ==
531 531  
532 532  === 5.2.1 LoRa ~-~-> LoRa ===
533 533  
534 -(((
535 535  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
536 -)))
537 537  
538 -(((
539 539  Different DLOS8N hardware version can support different frequency range:
540 -)))
541 541  
542 542  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
543 543  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
544 544  
545 -(((
546 546  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
547 -)))
548 548  
549 549  [[image:1652423554776-574.png||height="380" width="740"]]
550 550  
551 -Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
480 +Note *: See this instruction for how to customize frequency band:
552 552  
482 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
553 553  
484 +
554 554  === 5.2.2 LoRa ~-~-> ABP Decryption ===
555 555  
556 556  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
557 557  
558 558  * No internet connection.
559 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
490 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
560 560  
561 -(((
562 -Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
563 -)))
492 +Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
564 564  
565 565  [[image:1652423628833-467.png||height="357" width="755"]]
566 566  
496 +
567 567  == 5.3 LoRaWAN Settings ==
568 568  
569 569  === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
... ... @@ -578,37 +578,36 @@
578 578  
579 579  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
580 580  
581 -**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
511 +See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
582 582  
513 +
583 583  === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
584 584  
585 585  [[image:1652428499323-384.png||height="275" width="723"]]
586 586  
587 -(((
588 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
589 -)))
518 +Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
590 590  
520 +
591 591  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
592 592  
593 -(((
594 594  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
595 -)))
596 596  
597 -(((
598 -Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
599 -)))
525 +Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
600 600  
601 601  [[image:1652428648903-878.png||height="266" width="731"]]
602 602  
529 +
603 603  == 5.4 MQTT Settings ==
604 604  
605 605  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
606 606  
607 -Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
534 +Instruction:
608 608  
536 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
609 609  
610 610  [[image:1652428705046-212.png||height="417" width="733"]]
611 611  
540 +
612 612  == 5.5 System ==
613 613  
614 614  === 5.5.1 System ~-~-> System Overview ===
... ... @@ -617,48 +617,59 @@
617 617  
618 618  [[image:1652428773760-580.png||height="408" width="728"]]
619 619  
549 +
620 620  === 5.5.2 System ~-~-> General ( login settings) ===
621 621  
622 622  [[image:1652428861256-300.png||height="354" width="724"]]
623 623  
624 -(((
625 625  **__System Password:__**
626 -)))
627 627  
628 -(((
629 629  There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
630 -)))
631 631  
632 -(((
633 633  This page can be used to set the password for them.
634 -)))
635 635  
636 636  (((
637 -**__Timezone:__**Set device timezone.
561 +
638 638  )))
639 639  
564 +**__Timezone:__**
565 +
566 +Set device timezone.
567 +
640 640  (((
641 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
569 +
642 642  )))
643 643  
572 +**__Port forwarding:__**
573 +
574 +Enable/Disable the HTTP and SSH access via WAN interface.
575 +
576 +
644 644  === 5.5.3 System ~-~-> Network ===
645 645  
646 646  [[image:1652429149053-824.png||height="467" width="725"]]
647 647  
648 -(((
649 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
650 -)))
581 +**__LAN Settings:__**
651 651  
583 +When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
584 +
652 652  (((
653 -__**WAN Settings:**__Setting for DLOS8N WAN port
586 +
654 654  )))
655 655  
656 -(((
657 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
589 +__**WAN Settings:**__
658 658  
591 +Setting for DLOS8N WAN port
592 +
593 +(((
659 659  
660 660  )))
661 661  
597 +__**WiFi Settings:**__
598 +
599 +Setting for DLOS8N WiFi IP when use it as WiFi Client
600 +
601 +
662 662  === 5.5.4 System ~-~-> WiFi ===
663 663  
664 664  DLOS8N WiFi Settings.
... ... @@ -665,6 +665,7 @@
665 665  
666 666  [[image:1652429430767-921.png||height="367" width="723"]]
667 667  
608 +
668 668  === 5.5.5 System ~-~-> Cellular ===
669 669  
670 670  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
... ... @@ -673,10 +673,12 @@
673 673  
674 674  (% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
675 675  
617 +
676 676  === 5.5.6 System ~-~-> Network Status ===
677 677  
678 678  [[image:1652429486609-208.png||height="415" width="728"]]
679 679  
622 +
680 680  === 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
681 681  
682 682  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
... ... @@ -689,13 +689,13 @@
689 689  
690 690  Please see this document for detail:
691 691  
692 -(((
693 693  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
694 -)))
695 695  
696 696  
697 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
638 +R-SSH is for remote access device and management, introduction for how to use:
698 698  
640 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
641 +
699 699  [[image:1652429624400-864.png||height="432" width="716"]]
700 700  
701 701  
... ... @@ -711,13 +711,10 @@
711 711  
712 712  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
713 713  
714 -(((
657 +
715 715  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
716 -)))
717 717  
718 -(((
719 719  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
720 -)))
721 721  
722 722  [[image:1652429711145-862.png||height="270" width="737"]]
723 723  
... ... @@ -729,6 +729,7 @@
729 729  
730 730  [[image:1652429962190-224.png||height="358" width="729"]]
731 731  
672 +
732 732  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
733 733  
734 734  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -737,6 +737,7 @@
737 737  
738 738  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
739 739  
681 +
740 740  === 5.5.9 System ~-~-> Reboot/Reset ===
741 741  
742 742  [[image:1652430197132-330.png||height="256" width="724"]]
... ... @@ -751,28 +751,22 @@
751 751  
752 752  Place to show what package has installed and possible to upgrade packages.
753 753  
696 +(((
697 +
698 +)))
699 +
754 754  == 5.6 LogRead ==
755 755  
756 756  === 5.6.1 LogRead ~-~-> LoRa Log ===
757 757  
704 +[[image:1652430356784-567.png||height="325" width="730"]]
758 758  
759 759  Show the frequency for LoRa Radio and traffics.
760 760  
761 -[[image:image-20220615204306-1.png||height="575" width="733"]]
708 +(((
709 +
710 +)))
762 762  
763 -
764 -Show the IoT Server Connection State and FWD State
765 -
766 -[[image:image-20220616083933-1.png||height="556" width="729"]]
767 -
768 -DLOS8 can view GPS location in the Logread FWD State
769 -
770 -
771 -Show the Error logs, RxTxJson lorawan packages, and PULL State
772 -
773 -[[image:image-20220615205416-6.png||height="442" width="884"]]
774 -
775 -
776 776  === 5.6.2 LogRead ~-~-> System Log ===
777 777  
778 778  Show the system log
... ... @@ -779,12 +779,16 @@
779 779  
780 780  [[image:1652430369760-511.png||height="373" width="730"]]
781 781  
718 +
782 782  = 6. More features =
783 783  
784 784  == 6.1 More instructions ==
785 785  
786 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
723 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
787 787  
725 +(((
726 +
727 +)))
788 788  
789 789  = 7. Linux System =
790 790  
... ... @@ -813,21 +813,13 @@
813 813  
814 814  == 7.2 Edit and Transfer files ==
815 815  
816 -(((
817 817  The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
818 -)))
819 819  
820 -(((
821 821  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
822 -)))
823 823  
824 -(((
825 825  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
826 -)))
827 827  
828 -(((
829 829  Screenshot is as below:
830 -)))
831 831  
832 832  [[image:1652431650755-450.png]]
833 833  
... ... @@ -834,17 +834,11 @@
834 834  
835 835  == 7.3 File System ==
836 836  
837 -(((
838 838  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
839 -)))
840 840  
841 -(((
842 842  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
843 -)))
844 844  
845 -(((
846 846  You can use an external USB flash memory device to extend the size of flash memory for storage.
847 -)))
848 848  
849 849  
850 850  == 7.4 Package maintenance system ==
... ... @@ -851,13 +851,9 @@
851 851  
852 852  DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
853 853  
854 -(((
855 855  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
856 -)))
857 857  
858 -(((
859 859  **In Linux Console run:**
860 -)))
861 861  
862 862  (((
863 863  (% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
... ... @@ -909,28 +909,21 @@
909 909  
910 910  == 9.1 How can I configure for a customized frequency band? ==
911 911  
912 -(((
913 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
914 -)))
834 +See below link for how to customize frequency band:
915 915  
916 -(((
917 -
918 -)))
836 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
919 919  
838 +
920 920  == 9.2 Can I connect DLOS8N to LORIOT? ==
921 921  
922 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
841 +Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
923 923  
924 924  
925 925  == 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
926 926  
927 -(((
928 928  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
929 -)))
930 930  
931 -(((
932 932  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
933 -)))
934 934  
935 935  
936 936  == 9.4 Can I use 868Mhz version for 915Mhz bands? ==
... ... @@ -956,9 +956,7 @@
956 956  
957 957   (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
958 958  
959 -(((
960 960  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
961 -)))
962 962  
963 963  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
964 964  
... ... @@ -965,21 +965,16 @@
965 965  
966 966  == 10.2 How to recover the DLOS8N if the firmware crashes ==
967 967  
968 -(((
969 -Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
970 -)))
881 +Please follow this instruction to recover your gateway:
971 971  
972 -(((
973 -
974 -)))
883 +[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
975 975  
885 +
976 976  == 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
977 977  
978 978  [[image:1652435238615-272.png||height="247" width="727"]]
979 979  
980 -(((
981 981  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
982 -)))
983 983  
984 984  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
985 985  
... ... @@ -1022,26 +1022,23 @@
1022 1022  
1023 1023  = 12. Packing Info =
1024 1024  
1025 -(((
1026 1026  **Package Includes**:
1027 -)))
1028 1028  
1029 1029  * DLOS8N LoRaWAN Gateway x 1
1030 1030  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1031 1031  * Packaging with environmental protection paper box
1032 1032  
1033 -(((
1034 1034  **Dimension and weight**:
1035 -)))
1036 1036  
1037 1037  * Device Size: 12 x 12 x 3 cm
1038 1038  * Weight: 187g
1039 1039  * Package Size: 14.5 x 13.5 x 6 cm
1040 1040  * Weight: 300g
945 +*
1041 1041  
1042 1042  = 13. Support =
1043 1043  
1044 -* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
949 +* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1045 1045  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1046 1046  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1047 1047  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652436787176-950.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
1656917428377-954.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.7 KB
Content
1656918270059-192.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657079015096-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
1657079055940-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -214.1 KB
Content
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
image-20220513184125-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -139.3 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.3 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0