Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 122.2 >
edited by Xiaoling
on 2022/07/06 15:58
To version < 73.7 >
edited by Xiaoling
on 2022/05/13 18:02
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LPS8N - LoRaWAN Gateway User Manual
1 +DLOS8N
Content
... ... @@ -1,76 +1,59 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:1656917428377-954.png||height="475" width="475"]]
4 +[[image:1652409757234-446.png]]
3 3  
4 4  
5 5  
8 +**DLOS8N Outdoor LoRaWAN Gateway User Manual**
6 6  
7 -**Table of Contents：**
8 8  
11 +Table of Contents
9 9  
13 +{{toc/}}
10 10  
11 11  
12 12  
13 13  
18 += 1. Introduction =
14 14  
20 +== 1.1 What is the DLOS8N ==
15 15  
22 +The DLOS8N is an (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway. (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
16 16  
24 +DLOS8N supports (% style="color:#4f81bd" %)Semtech packet forwarder (% style="color:black" %)and (% style="color:#4f81bd" %)LoRaWAN Station connection, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)SX1302 LoRaWAN concentrator.
17 17  
26 +DLOS8N has (% style="color:#4f81bd" %)pre-configured standard LoRaWAN frequency bands (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
18 18  
28 +DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
19 19  
30 +DLOS8N supports (% style="color:#4f81bd" %) auto-provision (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
20 20  
21 -(% style="color:inherit; font-family:inherit; font-size:29px" %)1.  Introduction
32 +[[image:1652411526195-923.png]]
22 22  
23 -== 1.1  What is the LPS8N ==
24 24  
35 +== 1.2 Specifications ==
25 25  
37 +**Hardware System:**
26 26  
27 -(((
28 -The LPS8N is an (% style="color:#4f81bd" %)**open source LoRaWAN Indoor Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
29 -)))
30 -
31 -(((
32 -The LPS8N uses (% style="color:#4f81bd" %)**Semtech packet forwarder**(%%) & (% style="color:#4f81bd" %)**LoRaWAN Station connection**(%%) and fully compatible with LoRaWAN protocol. It includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator**(%%), which provides 10 programmable parallel demodulation paths.
33 -)))
34 -
35 -(((
36 -LPS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:#4f81bd" %)**customized the frequency bands** (%%)to use in their own LoRa network.
37 -)))
38 -
39 -(((
40 -LPS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
41 -)))
42 -
43 -(((
44 -
45 -)))
46 -
47 -[[image:1656918270059-192.png]]
48 -
49 -
50 -== 1.2  Specifications ==
51 -
52 -
53 -(% style="color:#037691" %)**Hardware System:**
54 -
55 -(((
56 56   Linux Part:
57 -)))
58 58  
59 59  * 400Mhz ar9331 processor
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -(% style="color:#037691" %)**Interface:**
45 +**Interface:**
64 64  
65 65  * 10M/100M RJ45 Ports x 1
66 66  * WiFi : 802.11 b/g/n
67 67  * LoRaWAN Wireless
68 -* Power Input: 5V DC, 2A, Type C
50 +* Power Input: 12 ~~ 24 V DC, 2 A
51 +* IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
69 69  * USB 2.0 host connector x 1
70 70  * Mini-PCI E connector x 1
71 71  * SX1302 + 2 x SX1250
72 72  
73 -(% style="color:#037691" %)**WiFi Spec:**
56 +**WiFi Spec:**
74 74  
75 75  * IEEE 802.11 b/g/n
76 76  * Frequency Band: 2.4 ~~ 2.462GHz
... ... @@ -83,9 +83,9 @@
83 83  ** 11g 54M : -71dbm
84 84  ** 11n 20M : -67dbm
85 85  
86 -(% style="color:#037691" %)**LoRa Spec:**
69 +**LoRa Spec:**
87 87  
88 -* Up to -140 dBm sensitivity
71 +* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
89 89  * 70 dB CW interferer rejection at 1 MHz offset
90 90  * Able to operate with negative SNR, CCR up to 9dB
91 91  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -94,117 +94,130 @@
94 94  * Dynamic data-rate (DDR) adaptation
95 95  * True antenna diversity or simultaneous dual-band operation
96 96  
97 -(% style="color:#037691" %)**Cellular 4G LTE (optional):**
80 +**Cellular 4G LTE (optional):**
98 98  
99 -* Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
100 -* Micro SIM Slot
101 -* External 4G Sticker Antenna.
82 +* Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
83 +* Standard Size SIM Slot
84 +* 2 x 4G Sticker Antenna.
102 102  * Up to 150Mbps downlink and 50Mbps uplink data rates
103 103  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
89 +**Power over Ethernet:**
106 106  
91 +* IEEE 802.3af compliant.
92 +* Support wide input voltage range  37Vdc to 57Vdc.
93 +* Thermal cut off.
94 +* Short circuit protection.
95 +* Over current protection
96 +* Isolation level 4 KVrms.
97 +* Enhanced surge protection
107 107  
108 -== 1.3  Features ==
99 +== 1.3 Features ==
109 109  
110 -* Open Source OpenWrt system
111 -* Managed by Web GUI, SSH via WAN or WiFi
112 -* Remote access with Reverse-SSH or remote.it
113 -* Emulates 49x LoRa demodulators
114 -* LoRaWAN Gateway
115 -* 10 programmable parallel demodulation paths
116 -* Pre-configure to support different LoRaWAN regional settings.
117 -* Allow to customize LoRaWAN regional parameters.
118 -* Support Local decode ABP end node info and transfer to MQTT server
119 -* Support different level log in.
120 -* Support Semtech Packet Forwarder
121 -* Support LoRaWAN basic station.
122 -* Optional 3G/4G cellular connection
101 +* Open Source Embedded Linux system
102 +* Managed by Web GUI, SSH via LAN or WiFi
103 +* Support Semtech UDP packet forwarder
104 +* Support LoRaWAN Station Connection
105 +* Cellular Failover conntection(option)
106 +* Direct Communication to LoRaWAN ABP Node
107 +* LoRaWAN packet filtering
108 +* Far seeing LED indicator
109 +* Built-in GPS module for location & timing
110 +* External fiber glass antenna
111 +* Auto-Provision
112 +* Remote Monitoring
113 +* 802.3af PoE
114 +* IP65
115 +* Lighting Protection
116 +* Power Consumption:12v ,300-500mA
123 123  
118 +== 1.4 Hardware System Structure ==
124 124  
120 +[[image:1652411641871-482.png||height="425" width="732"]]
125 125  
126 -== 1.4  Hardware System Structure ==
127 127  
128 -[[image:1657079015096-949.png]]
123 +== 1.5 DLOS8N Applications ==
129 129  
125 +[[image:1652411671209-920.png||height="618" width="650"]]
130 130  
131 -== 1.5  LPS8N Applications ==
132 132  
133 -[[image:1657079055940-721.png]]
128 +== 1.6 LED Indicators ==
134 134  
130 +[[image:1652411720670-489.png]]
135 135  
136 -== 1.6  LED Indicators ==
137 137  
133 +There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
138 138  
139 -LPS8N has totally four LEDs, They are:
135 +(((
136 +(((
137 +* (((
138 +(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
139 +)))
140 +)))
140 140  
141 -* **Power LED **[[image:image-20220706115518-1.png||height="15" width="16"]] : This (% style="color:red" %)**RED LED**(%%) will be **solid on** if the device is properly powered.
142 -* **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
143 -* **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
144 -** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
145 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
146 -** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
142 +* (((
143 +(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
144 +)))
145 +* (((
146 +(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
147 +)))
148 +)))
147 147  
148 -* **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
149 149  
150 -= 2.  Access and Configure LPS8N =
151 +== 1.7 WiFi Direction ==
151 151  
152 -(((
153 -The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
154 -)))
153 +DLOS8N use directional WiFi Antenna. The best direction is as below:
155 155  
155 +[[image:1652412859663-161.png||height="341" width="333"]]
156 156  
157 -== 2.1  Find IP address of LPS8N ==
158 158  
159 -=== 2.1.1  Connect via WiFi ===
158 += 2. Access and Configure DLOS8N =
160 160  
161 -[[image:1657085974260-168.png]]
160 +The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
162 162  
162 +== 2.1 Find IP address of DLOS8N ==
163 163  
164 -At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
164 +=== 2.1.1 Connect via WiFi ===
165 165  
166 -[[image:1652413127647-377.png]]
166 +[[image:1652412985720-934.png]]
167 167  
168 168  
169 -(((
170 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
169 +At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
171 171  
171 +[[image:1652413127647-377.png]]
172 172  
173 -
174 -)))
173 +(% style="background-color:#ffffcc" %)dragino+dragino
175 175  
176 -=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
175 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
177 177  
178 -[[image:1657086105922-299.png]]
179 179  
178 +=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
180 180  
181 -(((
182 -Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
180 +[[image:1652414114583-532.png]]
183 183  
184 184  
185 -
186 -)))
183 +Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
187 187  
188 -=== 2.1.3  Connect via WiFi with DHCP IP from router ===
189 189  
190 -[[image:1657086192720-649.png]]
186 +=== 2.1.3 Connect via WiFi with DHCP IP from router ===
191 191  
188 +[[image:1652414137639-956.png]]
192 192  
193 -If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
194 194  
191 +If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
195 195  
196 196  
197 -=== 2.1.4  Connect via Ethernet with fall back ip ===
194 +=== 2.1.4 Connect via Ethernet with fall back ip ===
198 198  
199 -The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
196 +The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
200 200  
201 201  
199 +== 2.2 Access Configure Web UI ==
202 202  
203 -== 2.2  Access Configure Web UI ==
204 -
205 205  **Web Interface**
206 206  
207 -Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
203 +Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
208 208  
209 209  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
210 210  
... ... @@ -213,7 +213,7 @@
213 213  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
214 214  
215 215  
216 -You will see the login interface of LPS8N as shown below.
212 +You will see the login interface of DLOS8N as shown below.
217 217  
218 218  The account details for Web Login are:
219 219  
... ... @@ -225,119 +225,91 @@
225 225  
226 226  
227 227  
228 -= 3.  Typical Network Setup =
229 229  
230 -== 3.1  Overview ==
225 += 3. Typical Network Setup =
231 231  
232 -The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
227 +== 3.1 Overview ==
233 233  
229 +The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 +
234 234  * **WAN Port Internet Mode**
235 235  * **WiFi Client Mode**
236 236  * **WiFi AP Mode**
234 +* **Cellular Mode**
237 237  
236 +== 3.2 Use WAN port to access Internet ==
238 238  
238 +By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 239  
240 -== 3.2  Use WAN port to access Internet ==
240 +[[image:1652420169255-959.png]]
241 241  
242 -By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
243 243  
243 +== 3.3 Access the Internet as a WiFi Client ==
244 244  
245 -[[image:1657088560833-398.png]]
246 -
247 -
248 -== 3.3  Access the Internet as a WiFi Client ==
249 -
250 250  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
251 251  
252 -(((
253 253  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
254 254  
255 -[[image:1657088818095-182.png]]
256 -)))
249 +[[image:1652420327792-211.png]]
257 257  
258 258  
259 -(((
260 260  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
261 261  
262 -
263 -)))
264 264  
265 -== 3.4  Use built-in 4G modem for internet access ==
255 +== 3.4 Access the Internet via Cellular ==
266 266  
267 -(((
268 -(((
269 -If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
270 -)))
257 +If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
271 271  
272 272  
273 -(((
274 -First, install the Micro SIM card as below direction
275 -)))
260 +First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
276 276  
277 -(((
278 -Second, Power off/ ON LPS8N to let it detect the SIM card.
279 -)))
280 -)))
262 +[[image:1652420606018-181.png]]
281 281  
282 282  
283 -[[image:1657090855037-497.png]]
265 +[[image:1652420718132-929.png||height="450" width="766"]]
284 284  
285 -(((
286 -
287 -)))
288 288  
289 -(((
290 290  The set up page is (% style="color:#4f81bd" %)**System ~-~-> Cellular**
291 -)))
292 292  
293 -(((
270 +
294 294  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
295 -)))
296 296  
297 -(((
298 -[[image:1657090932270-444.png]]
299 -)))
273 +[[image:1652421032117-341.png||height="329" width="752"]]
300 300  
275 +(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
301 301  
302 -== 3.5  Check Internet connection ==
303 303  
278 +== 3.5 Check Internet connection ==
279 +
304 304  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
305 305  
306 -* GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
307 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
308 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
282 +* GREEN Tick ​​​​[[image:1652421151598-130.png||height="23" width="24"]] : This interface has Internet connection.
283 +* Yellow Tick  [[image:1652421168047-470.png||height="22" width="21"]] : This interface has IP address but don’t use it for internet connection.
284 +* RED Cross   [[image:1652421179500-890.png||height="24" width="27"]] : This interface doesn’t connected.
309 309  
310 -[[image:1657091099235-452.png]]
286 +[[image:1652421351382-793.png||height="339" width="765"]]
311 311  
312 312  
289 += 4. Example: Configure as a LoRaWAN gateway =
313 313  
314 -= 4.  Example: Configure as a LoRaWAN gateway =
291 +DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
315 315  
316 -LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
293 +[[image:image-20220513140429-1.png||height="565" width="824"]]
317 317  
318 -(((
319 -[[image:1657091257648-882.png]]
320 -)))
295 +This chapter describes how to use the DLOS8Nto work with
321 321  
322 -(((
323 -This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
324 -)))
297 +[[T>>url:https://www.thethingsnetwork.org/]]heThingsNetwork v3(T[[TN>>url:https://www.thethingsnetwork.org/]] v3[[)>>url:http://)]][[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
325 325  
326 326  
300 +== 4.1 Create a gateway in TTN V3 Server ==
327 327  
328 -== 4.1  Create a gateway in TTN V3 Server ==
329 -
330 330  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
331 331  
332 -(((
333 -Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
334 -)))
304 +Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 335  
336 -(((
337 -[[image:1657091583941-544.png]]
338 -)))
306 +[[image:1652421929753-168.png||height="403" width="739"]]
339 339  
340 -The example gateway id is: (% style="color:green" %)**a840411e96744154**
308 +The example gateway id is: a840411e96744154
341 341  
342 342  
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
... ... @@ -344,131 +344,99 @@
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
346 346  
347 -[[image:1657091739530-531.png]]
315 +[[image:1652422127479-258.png||height="346" width="738"]]
348 348  
349 349  
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 -(((
353 -[[image:1657091719947-297.png]]
354 -)))
320 +[[image:1652422142236-792.png||height="356" width="737"]]
355 355  
322 +
356 356  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
357 357  
325 +* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
326 +* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
327 +* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
328 +* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
358 358  
359 -* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
360 -* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
361 -* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
362 -* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
363 -
364 -
365 -
366 366  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
367 367  
368 -[[image:1657091941182-367.png]]
332 +[[image:1652422440891-514.png||height="360" width="747"]]
369 369  
370 370  Click the Gateway icon and then click Add gateway.
371 371  
372 -
373 373  Open the following page:
374 374  
338 + [[image:1652422470352-518.png||height="391" width="716"]]
375 375  
376 - [[image:image-20220706155323-5.png||height="579" width="1060"]]
340 +[[image:1652422479876-297.png||height="398" width="729"]]
377 377  
378 -
379 -[[image:image-20220706155323-6.png||height="582" width="1066"]]
380 -
381 -
382 -(((
383 383  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
384 -)))
385 385  
386 386  After creating the gateway, you can see the gateway info, as below.
387 387  
388 -[[image:1657094130908-567.png]](% style="display:none" %)
346 +[[image:1652422509034-682.png||height="299" width="739"]]
389 389  
390 390  
391 -== 4.2  Configure DLOS8N to connect to TTN v3 ==
349 +== 4.2 Configure DLOS8N to connect to TTN v3 ==
392 392  
393 -(((
394 -You can now configure the LPS8N to let it connect to TTN network V3.
395 -)))
351 +You can now configure the DLOS8N to let it connect to TTN network V3.
396 396  
397 -(((
398 -Make sure your LPS8N has a working Internet Connection first.
399 -)))
353 +Make sure your DLOS8N has a working Internet Connection first.
400 400  
401 -(((
402 402  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
403 -)))
404 404  
405 -[[image:1657094183213-301.png]]
357 +[[image:1652422624783-580.png||height="327" width="729"]]
406 406  
407 407  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
408 408  
409 -
410 410  In the home page, we can see the LoRaWAN connection is ready now.
411 411  
412 -[[image:1657094202420-798.png]]
363 +[[image:1652422685063-596.png||height="327" width="729"]]
413 413  
414 -
415 415  In TTN v3 portal, we can also see the gateway is connected.
416 416  
417 -[[image:1657094221515-510.png]]
367 +[[image:1652422703020-955.png||height="343" width="730"]]
418 418  
419 419  
420 -== 4.3  Configure frequency ==
370 +== 4.3 Configure frequency ==
421 421  
422 -We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
372 +We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
423 423  
424 -[[image:1657094249818-468.png]]
374 +[[image:1652422737399-529.png||height="362" width="737"]]
425 425  
426 426  
427 427  In logread page, user can check the frequency actually used.
428 428  
429 - [[image:1657094333704-207.png]]
379 + [[image:1652422763536-750.png||height="514" width="730"]]
430 430  
431 -== 4.4 Add a LoRaWAN End Device ==
432 432  
433 -(((
382 +4.4 Add a LoRaWAN End Device
383 +
434 434  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
435 -)))
436 436  
437 -(((
438 438  We use [[LT-22222-L>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]] IO Controller as a reference device - the setup for other LoRaWAN devices will be similar.
439 -)))
440 440  
441 441  [[image:1652422794767-871.png]]
442 442  
443 -(((
444 444  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
445 -)))
446 446  
447 -(((
448 448  Three codes are required to define the device in TTN v3:
449 -)))
450 450  
451 451  * DEV EUI - Unique ID code for a particular device.
452 452  * APP EUI - ID code for an Application defined in TTN v3.
453 453  * APP Key - Unique key to secure communications with a particular device.
454 454  
455 -(((
456 456  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
457 -)))
458 458  
459 459  [[image:1652422840936-838.png]]
460 460  
461 -(((
402 +
462 462  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
463 -)))
464 464  
465 -(((
466 466  For the TTN v3 server, you can use the codes set in the device as in the following example.
467 -)))
468 468  
469 -(((
470 470  Select **Add Application** to open the screen below.
471 -)))
472 472  
473 473  [[image:1652422946999-255.png||height="356" width="744"]]
474 474  
... ... @@ -478,13 +478,10 @@
478 478  
479 479  [[image:1652422975885-591.png||height="359" width="726"]]
480 480  
481 -(((
482 482  Select OTAA activation mode
483 -)))
484 484  
485 -(((
419 +
486 486  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
487 -)))
488 488  
489 489  [[image:1652422998005-968.png||height="352" width="744"]]
490 490  
... ... @@ -496,20 +496,16 @@
496 496  
497 497  [[image:1652423046741-467.png||height="355" width="736"]]
498 498  
499 -(((
500 500  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
501 -)))
502 502  
503 -(((
434 +
504 504  (% style="color:#4f81bd" %)**Step 2**: (% style="color:black" %)Power on LT-22222-L device and it will automatically join the TTN network. After joining successfully, it will start to upload messages to the TTN v3. Select the Live data tab and you will see the data appearing in the panel.
505 -)))
506 506  
507 -(((
508 508  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
509 -)))
510 510  
511 511  [[image:1652423277549-324.png||height="273" width="745"]]
512 512  
441 +
513 513  = 5. Web Configure Pages =
514 514  
515 515  == 5.1 Home ==
... ... @@ -518,43 +518,39 @@
518 518  
519 519  [[image:1652423418568-752.png||height="329" width="724"]]
520 520  
450 +
521 521  == 5.2 LoRa Settings ==
522 522  
523 523  === 5.2.1 LoRa ~-~-> LoRa ===
524 524  
525 -(((
526 526  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
527 -)))
528 528  
529 -(((
530 530  Different DLOS8N hardware version can support different frequency range:
531 -)))
532 532  
533 533  * **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
534 534  * **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
535 535  
536 -(((
537 537  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
538 -)))
539 539  
540 540  [[image:1652423554776-574.png||height="380" width="740"]]
541 541  
542 -Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
466 +Note *: See this instruction for how to customize frequency band:
543 543  
468 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
544 544  
470 +
545 545  === 5.2.2 LoRa ~-~-> ABP Decryption ===
546 546  
547 547  The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
548 548  
549 549  * No internet connection.
550 -* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
476 +* User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>http://8.211.40.43:8080/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]).
551 551  
552 -(((
553 -Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
554 -)))
478 +Detail of this feature: [[Communication with ABP End Node>>http://8.211.40.43:8080/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
555 555  
556 556  [[image:1652423628833-467.png||height="357" width="755"]]
557 557  
482 +
558 558  == 5.3 LoRaWAN Settings ==
559 559  
560 560  === 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
... ... @@ -569,37 +569,36 @@
569 569  
570 570  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
571 571  
572 -**See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
497 +See :[[Filter unwanted LoRaWAN packets>>http://8.211.40.43:8080/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
573 573  
499 +
574 574  === 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
575 575  
576 576  [[image:1652428499323-384.png||height="275" width="723"]]
577 577  
578 -(((
579 -Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
580 -)))
504 +Please see this instruction to know more detail and demo for how to connect to AWS-IoT LoRaWAN Core: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core>>url:http://wiki.dragino.com/index.php?title=Notes_for_AWS-IoT-Core]]
581 581  
506 +
582 582  === 5.3.3 LoRaWAN ~-~-> LORIOT ===
583 583  
584 -(((
585 585  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
586 -)))
587 587  
588 -(((
589 -Instruction: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
590 -)))
511 +Instruction: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
591 591  
592 592  [[image:1652428648903-878.png||height="266" width="731"]]
593 593  
515 +
594 594  == 5.4 MQTT Settings ==
595 595  
596 596  If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
597 597  
598 -Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
520 +Instruction:
599 599  
522 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#MQTT_Forward_Instruction]]
600 600  
601 601  [[image:1652428705046-212.png||height="417" width="733"]]
602 602  
526 +
603 603  == 5.5 System ==
604 604  
605 605  === 5.5.1 System ~-~-> System Overview ===
... ... @@ -608,48 +608,59 @@
608 608  
609 609  [[image:1652428773760-580.png||height="408" width="728"]]
610 610  
535 +
611 611  === 5.5.2 System ~-~-> General ( login settings) ===
612 612  
613 613  [[image:1652428861256-300.png||height="354" width="724"]]
614 614  
615 -(((
616 616  **__System Password:__**
617 -)))
618 618  
619 -(((
620 620  There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
621 -)))
622 622  
623 -(((
624 624  This page can be used to set the password for them.
625 -)))
626 626  
627 627  (((
628 -**__Timezone:__**Set device timezone.
547 +
629 629  )))
630 630  
550 +**__Timezone:__**
551 +
552 +Set device timezone.
553 +
631 631  (((
632 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
555 +
633 633  )))
634 634  
558 +**__Port forwarding:__**
559 +
560 +Enable/Disable the HTTP and SSH access via WAN interface.
561 +
562 +
635 635  === 5.5.3 System ~-~-> Network ===
636 636  
637 637  [[image:1652429149053-824.png||height="467" width="725"]]
638 638  
639 -(((
640 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
641 -)))
567 +**__LAN Settings:__**
642 642  
569 +When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
570 +
643 643  (((
644 -__**WAN Settings:**__Setting for DLOS8N WAN port
572 +
645 645  )))
646 646  
647 -(((
648 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
575 +__**WAN Settings:**__
649 649  
577 +Setting for DLOS8N WAN port
578 +
579 +(((
650 650  
651 651  )))
652 652  
583 +__**WiFi Settings:**__
584 +
585 +Setting for DLOS8N WiFi IP when use it as WiFi Client
586 +
587 +
653 653  === 5.5.4 System ~-~-> WiFi ===
654 654  
655 655  DLOS8N WiFi Settings.
... ... @@ -656,6 +656,7 @@
656 656  
657 657  [[image:1652429430767-921.png||height="367" width="723"]]
658 658  
594 +
659 659  === 5.5.5 System ~-~-> Cellular ===
660 660  
661 661  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
... ... @@ -664,10 +664,12 @@
664 664  
665 665  (% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
666 666  
603 +
667 667  === 5.5.6 System ~-~-> Network Status ===
668 668  
669 669  [[image:1652429486609-208.png||height="415" width="728"]]
670 670  
608 +
671 671  === 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
672 672  
673 673  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
... ... @@ -680,13 +680,13 @@
680 680  
681 681  Please see this document for detail:
682 682  
683 -(((
684 684  [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
685 -)))
686 686  
687 687  
688 -R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
624 +R-SSH is for remote access device and management, introduction for how to use:
689 689  
626 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH>>url:http://wiki.dragino.com/index.php?title=Main_Page#Remote_Access_Gateway_via_Reverse_SSH]]
627 +
690 690  [[image:1652429624400-864.png||height="432" width="716"]]
691 691  
692 692  
... ... @@ -702,13 +702,10 @@
702 702  
703 703  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
704 704  
705 -(((
643 +
706 706  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
707 -)))
708 708  
709 -(((
710 710  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
711 -)))
712 712  
713 713  [[image:1652429711145-862.png||height="270" width="737"]]
714 714  
... ... @@ -720,6 +720,7 @@
720 720  
721 721  [[image:1652429962190-224.png||height="358" width="729"]]
722 722  
658 +
723 723  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
724 724  
725 725  SCP the firmware to the system(% style="color:green" %)**/var**(%%)** **directory and then run
... ... @@ -728,6 +728,7 @@
728 728  
729 729  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
730 730  
667 +
731 731  === 5.5.9 System ~-~-> Reboot/Reset ===
732 732  
733 733  [[image:1652430197132-330.png||height="256" width="724"]]
... ... @@ -742,28 +742,22 @@
742 742  
743 743  Place to show what package has installed and possible to upgrade packages.
744 744  
682 +(((
683 +
684 +)))
685 +
745 745  == 5.6 LogRead ==
746 746  
747 747  === 5.6.1 LogRead ~-~-> LoRa Log ===
748 748  
690 +[[image:1652430356784-567.png||height="325" width="730"]]
749 749  
750 750  Show the frequency for LoRa Radio and traffics.
751 751  
752 -[[image:image-20220615204306-1.png||height="575" width="733"]]
694 +(((
695 +
696 +)))
753 753  
754 -
755 -Show the IoT Server Connection State and FWD State
756 -
757 -[[image:image-20220616083933-1.png||height="556" width="729"]]
758 -
759 -DLOS8 can view GPS location in the Logread FWD State
760 -
761 -
762 -Show the Error logs, RxTxJson lorawan packages, and PULL State
763 -
764 -[[image:image-20220615205416-6.png||height="442" width="884"]]
765 -
766 -
767 767  === 5.6.2 LogRead ~-~-> System Log ===
768 768  
769 769  Show the system log
... ... @@ -770,12 +770,16 @@
770 770  
771 771  [[image:1652430369760-511.png||height="373" width="730"]]
772 772  
704 +
773 773  = 6. More features =
774 774  
775 775  == 6.1 More instructions ==
776 776  
777 -[[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
709 +[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRa.2FLoRaWAN_Gateway_Instruction]]
778 778  
711 +(((
712 +
713 +)))
779 779  
780 780  = 7. Linux System =
781 781  
... ... @@ -804,21 +804,13 @@
804 804  
805 805  == 7.2 Edit and Transfer files ==
806 806  
807 -(((
808 808  The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
809 -)))
810 810  
811 -(((
812 812  In Windows, one of the easiest methods is using the [[WinSCP>>url:https://winscp.net/eng/index.php]] utility.
813 -)))
814 814  
815 -(((
816 816  After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
817 -)))
818 818  
819 -(((
820 820  Screenshot is as below:
821 -)))
822 822  
823 823  [[image:1652431650755-450.png]]
824 824  
... ... @@ -825,17 +825,11 @@
825 825  
826 826  == 7.3 File System ==
827 827  
828 -(((
829 829  The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
830 -)))
831 831  
832 -(((
833 833  The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
834 -)))
835 835  
836 -(((
837 837  You can use an external USB flash memory device to extend the size of flash memory for storage.
838 -)))
839 839  
840 840  
841 841  == 7.4 Package maintenance system ==
... ... @@ -842,13 +842,9 @@
842 842  
843 843  DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
844 844  
845 -(((
846 846  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
847 -)))
848 848  
849 -(((
850 850  **In Linux Console run:**
851 -)))
852 852  
853 853  (((
854 854  (% style="color:green" %)**root@dragino-169d30:~~# opkg update**           (% style="color:black" %)~/~/ to get the latest packages list
... ... @@ -900,28 +900,21 @@
900 900  
901 901  == 9.1 How can I configure for a customized frequency band? ==
902 902  
903 -(((
904 -See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
905 -)))
820 +See below link for how to customize frequency band:
906 906  
907 -(((
908 -
909 -)))
822 +[[http:~~/~~/wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway>>url:http://wiki.dragino.com/index.php?title=Customized_Frequency_Band_for_Gateway]]
910 910  
824 +
911 911  == 9.2 Can I connect DLOS8N to LORIOT? ==
912 912  
913 -Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
827 +Yes, the set up instruction is here: [[http:~~/~~/wiki.dragino.com/index.php?title=Notes_for_LORIOT>>url:http://wiki.dragino.com/index.php?title=Notes_for_LORIOT]]
914 914  
915 915  
916 916  == 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
917 917  
918 -(((
919 919  Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
920 -)))
921 921  
922 -(((
923 923  The source code and compile instructions can be found at: [[https:~~/~~/github.com/dragino/openwrt_lede-18.06>>url:https://github.com/dragino/openwrt_lede-18.06]]
924 -)))
925 925  
926 926  
927 927  == 9.4 Can I use 868Mhz version for 915Mhz bands? ==
... ... @@ -947,9 +947,7 @@
947 947  
948 948   (% style="background-color:yellow" %)* opkg_install_cmd: Cannot install package kmod-dragino2-si3217x.
949 949  
950 -(((
951 951  In this case, you can use the –force-depends option to install such package as long as the actual kernel version is the same.
952 -)))
953 953  
954 954  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
955 955  
... ... @@ -956,21 +956,16 @@
956 956  
957 957  == 10.2 How to recover the DLOS8N if the firmware crashes ==
958 958  
959 -(((
960 -Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
961 -)))
867 +Please follow this instruction to recover your gateway:
962 962  
963 -(((
964 -
965 -)))
869 +[[http:~~/~~/wiki.dragino.com/index.php?title=Recover_Gateway>>url:http://wiki.dragino.com/index.php?title=Recover_Gateway]]
966 966  
871 +
967 967  == 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
968 968  
969 969  [[image:1652435238615-272.png||height="247" width="727"]]
970 970  
971 -(((
972 972  The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
973 -)))
974 974  
975 975  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
976 976  
... ... @@ -1013,26 +1013,23 @@
1013 1013  
1014 1014  = 12. Packing Info =
1015 1015  
1016 -(((
1017 1017  **Package Includes**:
1018 -)))
1019 1019  
1020 1020  * DLOS8N LoRaWAN Gateway x 1
1021 1021  * Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1022 1022  * Packaging with environmental protection paper box
1023 1023  
1024 -(((
1025 1025  **Dimension and weight**:
1026 -)))
1027 1027  
1028 1028  * Device Size: 12 x 12 x 3 cm
1029 1029  * Weight: 187g
1030 1030  * Package Size: 14.5 x 13.5 x 6 cm
1031 1031  * Weight: 300g
931 +*
1032 1032  
1033 1033  = 13. Support =
1034 1034  
1035 -* Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
935 +* Try to see if your questions already answered in the [[wiki>>url:http://wiki.dragino.com/]].
1036 1036  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1037 1037  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1038 1038  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to:[[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1652436675869-206.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
1652436705761-420.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
1652436787176-950.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
1656917428377-954.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.7 KB
Content
1656918270059-192.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657079015096-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
1657079055940-721.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -214.1 KB
Content
1657085974260-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
1657086105922-299.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.9 KB
Content
image-20220513184125-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -139.3 KB
Content
image-20220615204306-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -45.8 KB
Content
image-20220615204341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
image-20220615204725-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.8 KB
Content
image-20220615204938-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -95.9 KB
Content
image-20220615205338-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20220615205416-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -134.4 KB
Content
image-20220616083933-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -86.3 KB
Content
image-20220706115518-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 KB
Content
image-20220706115518-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.8 KB
Content
image-20220706115518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
image-20220706115518-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0