Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 110.1 >
edited by Xiaoling
on 2022/07/06 15:07
To version < 154.2 >
edited by Xiaoling
on 2022/07/07 09:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -104,8 +104,6 @@
104 104  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
105 105  
106 106  
107 -
108 -
109 109  == 1.3  Features ==
110 110  
111 111  * Open Source OpenWrt system
... ... @@ -123,8 +123,6 @@
123 123  * Optional 3G/4G cellular connection
124 124  
125 125  
126 -
127 -
128 128  == 1.4  Hardware System Structure ==
129 129  
130 130  [[image:1657079015096-949.png]]
... ... @@ -239,8 +239,6 @@
239 239  * **WiFi AP Mode**
240 240  
241 241  
242 -
243 -
244 244  == 3.2  Use WAN port to access Internet ==
245 245  
246 246  By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
... ... @@ -266,7 +266,7 @@
266 266  
267 267  )))
268 268  
269 -== 3.4  Access the Internet via Cellular ==
263 +== 3.4  Use built-in 4G modem for internet access ==
270 270  
271 271  (((
272 272  (((
... ... @@ -302,75 +302,86 @@
302 302  [[image:1657090932270-444.png]]
303 303  )))
304 304  
305 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
306 306  
307 -== 3.5 Check Internet connection ==
300 +== 3.5  Check Internet connection ==
308 308  
309 309  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
310 310  
311 311  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
312 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
313 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
305 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
306 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
314 314  
315 -[[image:1652421351382-793.png||height="339" width="765"]]
308 +[[image:1657091099235-452.png]]
316 316  
317 -= 4. Example: Configure as a LoRaWAN gateway =
318 318  
319 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
320 320  
312 += 4.  Example: Configure as a LoRaWAN gateway =
313 +
314 +LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
315 +
321 321  (((
322 -[[image:image-20220513140429-1.png||height="565" width="824"]]
317 +[[image:1657091257648-882.png]]
323 323  )))
324 324  
325 -This chapter describes how to use the DLOS8Nto work with
320 +(((
321 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
322 +)))
326 326  
327 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
328 328  
329 -== 4.1 Create a gateway in TTN V3 Server ==
330 330  
326 +== 4.1  Create a gateway in TTN V3 Server ==
327 +
331 331  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
332 332  
333 333  (((
334 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
331 +Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 335  )))
336 336  
337 337  (((
338 -[[image:1652421929753-168.png||height="403" width="739"]]
335 +[[image:1657091583941-544.png]]
339 339  )))
340 340  
341 -The example gateway id is: **a840411e96744154**
338 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
342 342  
340 +
343 343  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
344 344  
345 345  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
346 346  
347 -[[image:1652422127479-258.png||height="346" width="738"]]
345 +[[image:1657091739530-531.png]]
348 348  
347 +
349 349  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
350 350  
351 351  (((
352 -[[image:1652422142236-792.png||height="356" width="737"]]
351 +[[image:1657091719947-297.png]]
353 353  )))
354 354  
355 355  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
356 356  
357 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
358 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
359 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
360 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
361 361  
357 +* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
358 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
359 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
360 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
361 +
362 +
362 362  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
363 363  
364 -[[image:1652422440891-514.png||height="360" width="747"]]
365 +[[image:1657091941182-367.png]]
365 365  
366 366  Click the Gateway icon and then click Add gateway.
367 367  
369 +
368 368  Open the following page:
369 369  
370 - [[image:1652422470352-518.png||height="391" width="716"]]
371 371  
372 -[[image:1652422479876-297.png||height="398" width="729"]]
373 + [[image:image-20220706155323-5.png||height="579" width="1060"]]
373 373  
375 +
376 +[[image:image-20220706155323-6.png||height="582" width="1066"]]
377 +
378 +
374 374  (((
375 375  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
376 376  )))
... ... @@ -377,16 +377,17 @@
377 377  
378 378  After creating the gateway, you can see the gateway info, as below.
379 379  
380 -[[image:1652422509034-682.png||height="299" width="739"]]
385 +[[image:1657094130908-567.png]](% style="display:none" %)
381 381  
382 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
383 383  
388 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
389 +
384 384  (((
385 -You can now configure the DLOS8N to let it connect to TTN network V3.
391 +You can now configure the LPS8N to let it connect to TTN network V3.
386 386  )))
387 387  
388 388  (((
389 -Make sure your DLOS8N has a working Internet Connection first.
395 +Make sure your LPS8N has a working Internet Connection first.
390 390  )))
391 391  
392 392  (((
... ... @@ -393,31 +393,35 @@
393 393  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
394 394  )))
395 395  
396 -[[image:1652422624783-580.png||height="327" width="729"]]
402 +[[image:1657094183213-301.png]]
397 397  
398 398  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
399 399  
406 +
400 400  In the home page, we can see the LoRaWAN connection is ready now.
401 401  
402 -[[image:1652422685063-596.png||height="327" width="729"]]
409 +[[image:1657094202420-798.png]]
403 403  
411 +
404 404  In TTN v3 portal, we can also see the gateway is connected.
405 405  
406 -[[image:1652422703020-955.png||height="343" width="730"]]
414 +[[image:1657094221515-510.png]]
407 407  
408 -== 4.3 Configure frequency ==
409 409  
410 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
417 +== 4.3  Configure frequency ==
411 411  
412 -[[image:1652422737399-529.png||height="362" width="737"]]
419 +We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
413 413  
421 +[[image:1657094249818-468.png]]
414 414  
423 +
415 415  In logread page, user can check the frequency actually used.
416 416  
417 - [[image:1652422763536-750.png||height="514" width="730"]]
426 + [[image:1657094333704-207.png]]
418 418  
419 -== 4.4 Add a LoRaWAN End Device ==
420 420  
429 +== 4.4  Add a LoRaWAN End Device ==
430 +
421 421  (((
422 422  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
423 423  )))
... ... @@ -430,6 +430,8 @@
430 430  
431 431  (((
432 432  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
443 +
444 +
433 433  )))
434 434  
435 435  (((
... ... @@ -444,10 +444,12 @@
444 444  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
445 445  )))
446 446  
447 -[[image:1652422840936-838.png]]
459 +[[image:1657094382177-591.png]]
448 448  
449 449  (((
450 450  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
463 +
464 +
451 451  )))
452 452  
453 453  (((
... ... @@ -458,16 +458,19 @@
458 458  Select **Add Application** to open the screen below.
459 459  )))
460 460  
461 -[[image:1652422946999-255.png||height="356" width="744"]]
475 +[[image:1657094417175-831.png]]
462 462  
463 463  Open the **Application **select** Add end device**
464 464  
479 +
465 465  Start Register the end device
466 466  
467 -[[image:1652422975885-591.png||height="359" width="726"]]
482 +[[image:1657094444802-101.png]]
468 468  
469 469  (((
470 470  Select OTAA activation mode
486 +
487 +
471 471  )))
472 472  
473 473  (((
... ... @@ -474,18 +474,22 @@
474 474  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
475 475  )))
476 476  
477 -[[image:1652422998005-968.png||height="352" width="744"]]
494 +[[image:1657094475730-208.png]]
478 478  
479 479  First, input the End device ID, AppEUI and DevEUI.
480 480  
481 -[[image:1652423022781-339.png||height="365" width="741"]]
482 482  
499 +[[image:1657094646429-966.png]]
500 +
483 483  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
484 484  
485 -[[image:1652423046741-467.png||height="355" width="736"]]
486 486  
504 +[[image:1657094674045-755.png]]
505 +
487 487  (((
488 488  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
508 +
509 +
489 489  )))
490 490  
491 491  (((
... ... @@ -496,36 +496,40 @@
496 496  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
497 497  )))
498 498  
499 -[[image:1652423277549-324.png||height="273" width="745"]]
520 +[[image:1657094791060-639.png]]
500 500  
501 -= 5. Web Configure Pages =
502 502  
503 -== 5.1 Home ==
523 += 5.  Web Configure Pages =
504 504  
525 +== 5.1  Home ==
526 +
505 505  Shows the system running status.
506 506  
507 -[[image:1652423418568-752.png||height="329" width="724"]]
529 +[[image:1657094893942-726.png]]
508 508  
509 -== 5.2 LoRa Settings ==
510 510  
511 -=== 5.2.1 LoRa ~-~-> LoRa ===
532 +== 5.2  LoRa Settings ==
512 512  
534 +=== 5.2.1  LoRa ~-~-> LoRa ===
535 +
513 513  (((
514 514  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
515 515  )))
516 516  
517 517  (((
518 -Different DLOS8N hardware version can support different frequency range:
541 +Different LPS8N hardware version can support different frequency range:
519 519  )))
520 520  
521 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
522 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
544 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
545 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
523 523  
524 524  (((
525 -After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
548 +
549 +
550 +After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
526 526  )))
527 527  
528 -[[image:1652423554776-574.png||height="380" width="740"]]
553 +[[image:1657094930903-357.png]]
529 529  
530 530  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
531 531  
... ... @@ -532,7 +532,7 @@
532 532  
533 533  === 5.2.2 LoRa ~-~-> ABP Decryption ===
534 534  
535 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
560 +The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
536 536  
537 537  * No internet connection.
538 538  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -541,12 +541,13 @@
541 541  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
542 542  )))
543 543  
544 -[[image:1652423628833-467.png||height="357" width="755"]]
569 +[[image:1657095412271-942.png]]
545 545  
546 -== 5.3 LoRaWAN Settings ==
547 547  
548 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
572 +== 5.3  LoRaWAN Settings ==
549 549  
574 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
575 +
550 550  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
551 551  
552 552  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -553,21 +553,24 @@
553 553  
554 554  (% style="color:red" %)**Note:**
555 555  
556 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
582 +~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
557 557  
558 558  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
559 559  
560 560  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
561 561  
562 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
563 563  
589 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
590 +
564 564  [[image:1652428499323-384.png||height="275" width="723"]]
565 565  
566 566  (((
567 567  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
595 +
596 +
568 568  )))
569 569  
570 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
599 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
571 571  
572 572  (((
573 573  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -579,33 +579,37 @@
579 579  
580 580  [[image:1652428648903-878.png||height="266" width="731"]]
581 581  
582 -== 5.4 MQTT Settings ==
583 583  
584 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
612 +== 5.4  MQTT Settings ==
585 585  
614 +If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
615 +
586 586  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
587 587  
588 588  
589 589  [[image:1652428705046-212.png||height="417" width="733"]]
590 590  
591 -== 5.5 System ==
592 592  
593 -=== 5.5.1 System ~-~-> System Overview ===
622 +== 5.5  System ==
594 594  
624 +=== 5.5.1  System ~-~-> System Overview ===
625 +
595 595  Shows the system info:
596 596  
597 -[[image:1652428773760-580.png||height="408" width="728"]]
628 +[[image:1657155158184-134.png]]
598 598  
599 -=== 5.5.2 System ~-~-> General ( login settings) ===
600 600  
601 -[[image:1652428861256-300.png||height="354" width="724"]]
602 602  
632 +=== 5.5.2  System ~-~-> General ( login settings) ===
633 +
634 +[[image:1657155183982-792.png]]
635 +
603 603  (((
604 604  **__System Password:__**
605 605  )))
606 606  
607 607  (((
608 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
641 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
609 609  )))
610 610  
611 611  (((
... ... @@ -613,83 +613,96 @@
613 613  )))
614 614  
615 615  (((
616 -**__Timezone:__**Set device timezone.
649 +**__Timezone:  __**Set device timezone.
617 617  )))
618 618  
619 619  (((
620 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
653 +**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
654 +
655 +
656 +
621 621  )))
622 622  
623 -=== 5.5.3 System ~-~-> Network ===
659 +=== 5.5.3  System ~-~-> Network ===
624 624  
625 -[[image:1652429149053-824.png||height="467" width="725"]]
661 +[[image:1657155288223-566.png]]
626 626  
627 627  (((
628 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
664 +**__LAN Settings:    __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
629 629  )))
630 630  
631 631  (((
632 -__**WAN Settings:**__Setting for DLOS8N WAN port
668 +__**WAN Settings:  **__Setting for LPS8N WAN port
633 633  )))
634 634  
635 635  (((
636 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
672 +__**WiFi Settings:   **__Setting for LPS8N WiFi IP when use it as WiFi Client
637 637  
674 +
638 638  
639 639  )))
640 640  
641 -=== 5.5.4 System ~-~-> WiFi ===
678 +=== 5.5.4  System ~-~-> WiFi ===
642 642  
643 -DLOS8N WiFi Settings.
680 +LPS8N WiFi Settings.
644 644  
645 -[[image:1652429430767-921.png||height="367" width="723"]]
682 +[[image:1657155457089-430.png]]
646 646  
647 -=== 5.5.5 System ~-~-> Cellular ===
648 648  
685 +
686 +=== 5.5.5  System ~-~-> Cellular ===
687 +
649 649  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
650 650  
651 -[[image:1652429309615-825.png||height="320" width="732"]]
652 652  
653 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
691 +[[image:1657155507672-204.png]]
654 654  
655 -=== 5.5.6 System ~-~-> Network Status ===
693 +(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
656 656  
657 -[[image:1652429486609-208.png||height="415" width="728"]]
658 658  
659 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
660 660  
661 -Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
697 +=== 5.5.6  System ~-~-> Network Status ===
662 662  
663 -[[image:1652429518191-846.png||height="332" width="733"]]
664 664  
665 -[[image:1652429527544-247.png||height="327" width="724"]]
700 +[[image:1657155554265-721.png]]
666 666  
667 -[[image:1652429537849-154.png||height="339" width="722"]]
668 668  
669 -Please see this document for detail:
670 670  
671 -(((
672 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
673 -)))
704 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
674 674  
706 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:(% style="display:none" %)
675 675  
708 +(% style="display:none" %) [[image:1657157402578-508.png||height="450" width="992"]]
709 +
710 +(% id="cke_bm_589629S" style="display:none" %) [[image:image-20220707092040-2.png||height="452" width="1002"]]
711 +
712 +[[image:image-20220707092040-3.png||height="449" width="956"]]
713 +
714 +
715 +Please see this document for detail:(% style="display:none" %)
716 +
717 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
718 +
719 +
676 676  R-SSH is for remote access device and management, introduction for how to use: **[[Remote Access Gateway>>doc:Main.Remote Access Gateway.WebHome]]**
677 677  
678 678  [[image:1652429624400-864.png||height="432" width="716"]]
679 679  
680 680  
681 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
682 682  
683 -We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
726 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
684 684  
728 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
729 +
685 685  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
686 686  
687 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
732 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
688 688  
689 689  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
690 690  
691 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
736 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
692 692  
738 +
693 693  (((
694 694  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
695 695  )))
... ... @@ -698,15 +698,16 @@
698 698  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
699 699  )))
700 700  
701 -[[image:1652429711145-862.png||height="270" width="737"]]
747 +[[image:1657156052651-770.png]]
702 702  
703 703  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
704 704  
751 +
705 705  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
706 706  
707 707  The system will automatically boot into the new firmware after upgrade.
708 708  
709 -[[image:1652429962190-224.png||height="358" width="729"]]
756 +[[image:1657156094153-520.png]]
710 710  
711 711  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
712 712  
... ... @@ -714,67 +714,111 @@
714 714  
715 715  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
716 716  
764 +
717 717  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
718 718  
719 -=== 5.5.9 System ~-~-> Reboot/Reset ===
720 720  
768 +=== 5.5.9  System ~-~-> Reboot/Reset ===
769 +
721 721  [[image:1652430197132-330.png||height="256" width="724"]]
722 722  
723 723  (((
724 724  
774 +
775 +
725 725  )))
726 726  
727 -=== 5.5.10 System ~-~-> Package Maintain ===
778 +=== 5.5.10  System ~-~-> Package Maintain ===
728 728  
729 -[[image:1652430243826-126.png||height="289" width="723"]]
730 730  
781 +[[image:1657156199070-491.png]]
782 +
731 731  Place to show what package has installed and possible to upgrade packages.
732 732  
733 -== 5.6 LogRead ==
734 734  
735 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
736 736  
787 +== 5.6  LogRead ==
737 737  
789 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
790 +
791 +
738 738  Show the frequency for LoRa Radio and traffics.
739 739  
740 -[[image:image-20220615204306-1.png||height="575" width="733"]]
794 +[[image:1657156300781-933.png]]
741 741  
742 742  
743 -Show the IoT Server Connection State and FWD State
744 744  
745 -[[image:image-20220616083933-1.png||height="556" width="729"]]
798 +=== 5.6.2  LogRead ~-~-> System Log ===
746 746  
747 -DLOS8 can view GPS location in the Logread FWD State
800 +Show the system log
748 748  
802 +[[image:1657156341198-226.png]]
749 749  
750 -Show the Error logs, RxTxJson lorawan packages, and PULL State
751 751  
752 -[[image:image-20220615205416-6.png||height="442" width="884"]]
753 753  
806 += 6.  More features =
754 754  
755 -=== 5.6.2 LogRead ~-~-> System Log ===
808 +== 6.1 Packet Filtering ==
756 756  
757 -Show the system log
810 +Drop unwanted packets.
758 758  
759 -[[image:1652430369760-511.png||height="373" width="730"]]
812 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
760 760  
761 -= 6. More features =
762 762  
763 -== 6.1 More instructions ==
815 +== 6.2 Remote Access ==
764 764  
817 +Remote Access Devices for management.
818 +
819 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Remote%20Access%20Gateway/]]
820 +
821 +
822 +== 6.3 How to decode ABP LoRaWAN node ==
823 +
824 +Decode ABP:
825 +
826 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
827 +
828 +
829 +== 6.4 How to set data to MQTT broker ==
830 +
831 +Only support ABP LoRaWAN End Node
832 +
833 +Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
834 +
835 +
836 +== 6.5  More instructions ==
837 +
765 765  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
766 766  
767 767  
768 -= 7. Linux System =
841 +== 6.6  Auto-Provision ==
769 769  
770 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
843 +Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
771 771  
772 -== 7.1 SSH Access for Linux console ==
845 +[[image:image-20220707092040-1.png||height="451" width="995"]]
773 773  
774 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
847 +[[image:image-20220707092040-2.png||height="452" width="1002"]]
775 775  
776 -IP address:  IP address of DLOS8N
849 +[[image:image-20220707092040-3.png||height="449" width="956"]](% style="display:none" %)
777 777  
851 +Please see this document for detail:
852 +
853 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
854 +
855 +(% style="display:none" %) (%%)
856 +
857 += 7.  (% style="display:none" %) (%%)Linux System =
858 +
859 +The LPS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
860 +
861 +(% style="display:none" %) (%%)
862 +
863 +== 7.1  SSH Access for Linux console ==
864 +
865 +User can access the Linux console via the SSH protocol. Make sure your PC and the LPS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
866 +
867 +IP address:  IP address of LPS8N
868 +
778 778  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
779 779  
780 780  User Name:      (% style="color:green" %)**root**
... ... @@ -783,15 +783,18 @@
783 783  
784 784  After logging in, you will be in the Linux console and can enter commands as shown below.
785 785  
786 -[[image:1652431588565-830.png]]
787 787  
878 +[[image:1657158198733-338.png]]
879 +
788 788  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
789 789  
790 -[[image:1652431609193-637.png||height="214" width="732"]]
791 791  
883 +[[image:1657158190234-805.png]]
792 792  
793 -== 7.2 Edit and Transfer files ==
794 794  
886 +
887 +== 7.2  Edit and Transfer files ==
888 +
795 795  (((
796 796  The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
797 797  )))
... ... @@ -811,6 +811,7 @@
811 811  [[image:1652431650755-450.png]]
812 812  
813 813  
908 +
814 814  == 7.3 File System ==
815 815  
816 816  (((
... ... @@ -883,7 +883,48 @@
883 883  
884 884  = 8. Upgrade Linux Firmware =
885 885  
981 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
886 886  
983 +* **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
984 +
985 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
986 +
987 +* **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
988 +
989 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
990 +
991 +
992 +The file named as **(% style="color:green" %) xxxxx–xxxxx-squashfs-sysupgrade.bin **is the upgrade Image. There are different methods to upgrade, as below.
993 +
994 +
995 +== 8.1 Upgrade via Web UI ==
996 +
997 +Go to the page: **(% style="color:green" %)Web à System à Firmware Upgrade**
998 +
999 +Select the required image and click **(% style="color:red" %)Flash Image.**(%%) The image will be uploaded to the device, and then click **(% style="color:red" %)Process Update**(%%) to upgrade.
1000 +
1001 +
1002 +**(% style="color:red" %)NOTE**(%%): You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
1003 +
1004 +
1005 +The system will automatically boot into the new firmware after upgrade.
1006 +
1007 +
1008 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
1009 +
1010 +
1011 +== 8.2 Upgrade via Linux console ==
1012 +
1013 +
1014 +SCP the firmware to the system** /var** directory and then run
1015 +
1016 +**(% style="color:#4472C4" %) //root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
1017 +
1018 +
1019 +**(% style="color:red" %)NOTE**(%%): it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
1020 +
1021 +
1022 +
887 887  = 9. FAQ =
888 888  
889 889  == 9.1 How can I configure for a customized frequency band? ==
1657091583941-544.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1657156199070-491.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
1657156300781-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657156341198-226.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657157402578-508.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +87.2 KB
Content
1657158190234-805.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657158198733-338.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.4 KB
Content
1657158255685-710.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.4 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.6 KB
Content
image-20220707092040-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +106.4 KB
Content
image-20220707092040-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +105.1 KB
Content
image-20220707092040-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +142.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0