Last modified by Kilight Cao on 2024/05/18 14:36
<
From version < 102.1 >
edited by Xiaoling
on 2022/07/06 13:39
To version < 144.2 >
edited by Xiaoling
on 2022/07/07 09:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -60,7 +60,6 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 -
64 64  (% style="color:#037691" %)**Interface:**
65 65  
66 66  * 10M/100M RJ45 Ports x 1
... ... @@ -71,7 +71,6 @@
71 71  * Mini-PCI E connector x 1
72 72  * SX1302 + 2 x SX1250
73 73  
74 -
75 75  (% style="color:#037691" %)**WiFi Spec:**
76 76  
77 77  * IEEE 802.11 b/g/n
... ... @@ -85,7 +85,6 @@
85 85  ** 11g 54M : -71dbm
86 86  ** 11n 20M : -67dbm
87 87  
88 -
89 89  (% style="color:#037691" %)**LoRa Spec:**
90 90  
91 91  * Up to -140 dBm sensitivity
... ... @@ -97,7 +97,6 @@
97 97  * Dynamic data-rate (DDR) adaptation
98 98  * True antenna diversity or simultaneous dual-band operation
99 99  
100 -
101 101  (% style="color:#037691" %)**Cellular 4G LTE (optional):**
102 102  
103 103  * Quectel [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -111,7 +111,6 @@
111 111  
112 112  == 1.3  Features ==
113 113  
114 -
115 115  * Open Source OpenWrt system
116 116  * Managed by Web GUI, SSH via WAN or WiFi
117 117  * Remote access with Reverse-SSH or remote.it
... ... @@ -147,7 +147,7 @@
147 147  * **LoRa LED   **[[image:image-20220706115518-2.png||height="15" width="15"]] : This **RGB LED** will** (% style="color:green" %)blink GREEN(%%)** when LoRaWAN module starts or transmit a packet.
148 148  * **SYS LED    ** [[image:image-20220706115518-3.png||height="16" width="16"]] : This **RGB LED** will shows different colors on different state:
149 149  ** (% style="color:blue" %)**SOLID BLUE**(%%): Device is alive with LoRaWAN server connection.
150 -** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
145 +** (% style="color:blue" %)**BLINKING BLUE**(%%): a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:blue" %)**BLINKING BLUE**(%%) for several seconds and then with (% style="color:red" %)**SOLID RED**(%%) and (% style="color:blue" %)**BLINKING BLUE**(%%) together
151 151  ** (% style="color:red" %)**SOLID RED**(%%): Device doesn't have Internet connection.
152 152  
153 153  * **ETH LED    **[[image:image-20220706115518-4.png||height="15" width="17"]] :  This LED shows the ETH interface connection status.
... ... @@ -154,52 +154,64 @@
154 154  
155 155  
156 156  
152 += 2.  Access and Configure LPS8N =
157 157  
158 -= 2. Access and Configure DLOS8N =
154 +(((
155 +The LPS8N is configured as a WiFi Access Point by factory default. You can access and configure the LPS8N after connecting to its WiFi network, or via its WAN Ethernet port.
156 +)))
159 159  
160 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
161 161  
162 -== 2.1 Find IP address of DLOS8N ==
159 +== 2.1  Find IP address of LPS8N ==
163 163  
164 -=== 2.1.1 Connect via WiFi ===
161 +=== 2.1.1  Connect via WiFi ===
165 165  
166 -[[image:1652412985720-934.png]]
163 +[[image:1657085974260-168.png]]
167 167  
168 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
169 169  
166 +At the first boot of LPS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password: (% style="background-color:yellow" %)dragino+dragino
167 +
170 170  [[image:1652413127647-377.png]]
171 171  
172 -(% style="background-color:#ffffcc" %)dragino+dragino
173 173  
174 174  (((
175 175  User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
173 +
174 +
175 +
176 176  )))
177 177  
178 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
178 +=== 2.1.2  Connect via Ethernet with DHCP IP from router ===
179 179  
180 -[[image:1652414114583-532.png]]
180 +[[image:1657086105922-299.png]]
181 181  
182 182  
183 183  (((
184 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
184 +Alternatively, connect the LPS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LPS8N. You can also use this IP to connect.
185 +
186 +
187 +
185 185  )))
186 186  
187 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
190 +=== 2.1.3  Connect via WiFi with DHCP IP from router ===
188 188  
189 -[[image:1652414137639-956.png]]
192 +[[image:1657086192720-649.png]]
190 190  
191 191  
192 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
195 +If the LPS8N already connect to the router via WiFi, use can use the WiFi IP to connect to LPS8N.
193 193  
194 -=== 2.1.4 Connect via Ethernet with fall back ip ===
195 195  
196 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
197 197  
198 -== 2.2 Access Configure Web UI ==
199 +=== 2.1.4  Connect via Ethernet with fall back ip ===
199 199  
201 +The WAN port also has a [[fall back ip address>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router. Click [[here>>||anchor="H10.3A0IconfiguredLPS8NforWiFiaccessandlostitsIP.Whattodonow3F"]] to see how to configure.
202 +
203 +
204 +
205 +== 2.2  Access Configure Web UI ==
206 +
200 200  **Web Interface**
201 201  
202 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
209 +Open a browser on the PC and type the LPS8N ip address (depends on your connect method)
203 203  
204 204  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
205 205  
... ... @@ -208,7 +208,7 @@
208 208  http:~/~/IP_ADDRESS or [[http:~~/~~/ IP_ADDRESS:8000>>url:http://192.168.1.xx:8000]]
209 209  
210 210  
211 -You will see the login interface of DLOS8N as shown below.
218 +You will see the login interface of LPS8N as shown below.
212 212  
213 213  The account details for Web Login are:
214 214  
... ... @@ -218,50 +218,67 @@
218 218  
219 219  [[image:1652414287022-223.png]]
220 220  
221 -= 3. Typical Network Setup =
222 222  
223 -== 3.1 Overview ==
224 224  
225 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
230 += 3.  Typical Network Setup =
226 226  
232 +== 3.1  Overview ==
233 +
234 +The LPS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
235 +
227 227  * **WAN Port Internet Mode**
228 228  * **WiFi Client Mode**
229 229  * **WiFi AP Mode**
230 -* **Cellular Mode**
231 231  
232 -== 3.2 Use WAN port to access Internet ==
233 233  
234 -By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
235 235  
236 -[[image:1652420169255-959.png]]
242 +== 3.2  Use WAN port to access Internet ==
237 237  
238 -== 3.3 Access the Internet as a WiFi Client ==
244 +By default, the LPS8N is set to use the WAN port to connect to an upstream network. When you connect the LPS8N's WAN port to an upstream router, LPS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
239 239  
246 +
247 +[[image:1657088560833-398.png]]
248 +
249 +
250 +== 3.3  Access the Internet as a WiFi Client ==
251 +
240 240  In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
241 241  
242 242  (((
243 243  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
256 +
257 +[[image:1657088818095-182.png]]
244 244  )))
245 245  
246 -[[image:1652420327792-211.png]]
247 247  
248 248  (((
249 249  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
263 +
264 +
250 250  )))
251 251  
252 -== 3.4 Access the Internet via Cellular ==
267 +== 3.4  Use built-in 4G modem for internet access ==
253 253  
254 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
269 +(((
270 +(((
271 +If the LPS8N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
272 +)))
255 255  
274 +
256 256  (((
257 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
276 +First, install the Micro SIM card as below direction
258 258  )))
259 259  
260 -[[image:1652420606018-181.png]]
279 +(((
280 +Second, Power off/ ON LPS8N to let it detect the SIM card.
281 +)))
282 +)))
261 261  
262 262  
285 +[[image:1657090855037-497.png]]
286 +
263 263  (((
264 -[[image:1652420718132-929.png||height="427" width="727"]]
288 +
265 265  )))
266 266  
267 267  (((
... ... @@ -273,78 +273,90 @@
273 273  )))
274 274  
275 275  (((
276 -[[image:1652421032117-341.png||height="329" width="752"]]
300 +[[image:1657090932270-444.png]]
277 277  )))
278 278  
279 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
280 280  
281 -== 3.5 Check Internet connection ==
304 +== 3.5  Check Internet connection ==
282 282  
283 283  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
284 284  
285 285  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
286 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
287 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
309 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
310 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
288 288  
289 -[[image:1652421351382-793.png||height="339" width="765"]]
312 +[[image:1657091099235-452.png]]
290 290  
291 -= 4. Example: Configure as a LoRaWAN gateway =
292 292  
293 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
294 294  
316 += 4.  Example: Configure as a LoRaWAN gateway =
317 +
318 +LPS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
319 +
295 295  (((
296 -[[image:image-20220513140429-1.png||height="565" width="824"]]
321 +[[image:1657091257648-882.png]]
297 297  )))
298 298  
299 -This chapter describes how to use the DLOS8Nto work with
324 +(((
325 +This chapter describes how to use the DLOS8Nto work with (TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 +)))
300 300  
301 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
302 302  
303 -== 4.1 Create a gateway in TTN V3 Server ==
304 304  
330 +== 4.1  Create a gateway in TTN V3 Server ==
331 +
305 305  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
306 306  
307 307  (((
308 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 +Every LPS8N has a unique gateway id. The ID can be found at LoRaWAN page:
309 309  )))
310 310  
311 311  (((
312 -[[image:1652421929753-168.png||height="403" width="739"]]
339 +[[image:1657091583941-544.png]]
313 313  )))
314 314  
315 -The example gateway id is: **a840411e96744154**
342 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
316 316  
344 +
317 317  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
318 318  
319 319  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
320 320  
321 -[[image:1652422127479-258.png||height="346" width="738"]]
349 +[[image:1657091739530-531.png]]
322 322  
351 +
323 323  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
324 324  
325 325  (((
326 -[[image:1652422142236-792.png||height="356" width="737"]]
355 +[[image:1657091719947-297.png]]
327 327  )))
328 328  
329 329  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
330 330  
331 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
332 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
333 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
334 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
335 335  
361 +* Europe 1** (% style="color:red" %)corresponding Gateway server address:(%%)**(% style="color:red" %) (% style="color:black" %)eu1.cloud.thethings.network
362 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
363 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
364 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
365 +
366 +
367 +
336 336  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
337 337  
338 -[[image:1652422440891-514.png||height="360" width="747"]]
370 +[[image:1657091941182-367.png]]
339 339  
340 340  Click the Gateway icon and then click Add gateway.
341 341  
374 +
342 342  Open the following page:
343 343  
344 - [[image:1652422470352-518.png||height="391" width="716"]]
345 345  
346 -[[image:1652422479876-297.png||height="398" width="729"]]
378 + [[image:image-20220706155323-5.png||height="579" width="1060"]]
347 347  
380 +
381 +[[image:image-20220706155323-6.png||height="582" width="1066"]]
382 +
383 +
348 348  (((
349 349  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
350 350  )))
... ... @@ -351,16 +351,17 @@
351 351  
352 352  After creating the gateway, you can see the gateway info, as below.
353 353  
354 -[[image:1652422509034-682.png||height="299" width="739"]]
390 +[[image:1657094130908-567.png]](% style="display:none" %)
355 355  
356 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
357 357  
393 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
394 +
358 358  (((
359 -You can now configure the DLOS8N to let it connect to TTN network V3.
396 +You can now configure the LPS8N to let it connect to TTN network V3.
360 360  )))
361 361  
362 362  (((
363 -Make sure your DLOS8N has a working Internet Connection first.
400 +Make sure your LPS8N has a working Internet Connection first.
364 364  )))
365 365  
366 366  (((
... ... @@ -367,31 +367,35 @@
367 367  Choose the right server provider and click (% style="color:#4f81bd" %)**Save&Apply**
368 368  )))
369 369  
370 -[[image:1652422624783-580.png||height="327" width="729"]]
407 +[[image:1657094183213-301.png]]
371 371  
372 372  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
373 373  
411 +
374 374  In the home page, we can see the LoRaWAN connection is ready now.
375 375  
376 -[[image:1652422685063-596.png||height="327" width="729"]]
414 +[[image:1657094202420-798.png]]
377 377  
416 +
378 378  In TTN v3 portal, we can also see the gateway is connected.
379 379  
380 -[[image:1652422703020-955.png||height="343" width="730"]]
419 +[[image:1657094221515-510.png]]
381 381  
382 -== 4.3 Configure frequency ==
383 383  
384 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
422 +== 4.3  Configure frequency ==
385 385  
386 -[[image:1652422737399-529.png||height="362" width="737"]]
424 +We also need to set the frequency plan in LPS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
387 387  
426 +[[image:1657094249818-468.png]]
388 388  
428 +
389 389  In logread page, user can check the frequency actually used.
390 390  
391 - [[image:1652422763536-750.png||height="514" width="730"]]
431 + [[image:1657094333704-207.png]]
392 392  
393 -== 4.4 Add a LoRaWAN End Device ==
394 394  
434 +== 4.4  Add a LoRaWAN End Device ==
435 +
395 395  (((
396 396  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
397 397  )))
... ... @@ -404,6 +404,8 @@
404 404  
405 405  (((
406 406  (% style="color:#4f81bd" %)**Step 1**: (% style="color:black" %)Create a Device definition in TTN v3 with the OTAA keys from the example LT-22222-L IO Controller device.
448 +
449 +
407 407  )))
408 408  
409 409  (((
... ... @@ -418,10 +418,12 @@
418 418  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
419 419  )))
420 420  
421 -[[image:1652422840936-838.png]]
464 +[[image:1657094382177-591.png]]
422 422  
423 423  (((
424 424  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
468 +
469 +
425 425  )))
426 426  
427 427  (((
... ... @@ -432,16 +432,19 @@
432 432  Select **Add Application** to open the screen below.
433 433  )))
434 434  
435 -[[image:1652422946999-255.png||height="356" width="744"]]
480 +[[image:1657094417175-831.png]]
436 436  
437 437  Open the **Application **select** Add end device**
438 438  
484 +
439 439  Start Register the end device
440 440  
441 -[[image:1652422975885-591.png||height="359" width="726"]]
487 +[[image:1657094444802-101.png]]
442 442  
443 443  (((
444 444  Select OTAA activation mode
491 +
492 +
445 445  )))
446 446  
447 447  (((
... ... @@ -448,18 +448,22 @@
448 448  The LoRaWAN version for your device should be provided by the manufacturer in a datasheet as LoRaWAN version or LoRaWAN specification. The most commonly used LoRaWAN versions are v1.0.2 and v1.0.3.
449 449  )))
450 450  
451 -[[image:1652422998005-968.png||height="352" width="744"]]
499 +[[image:1657094475730-208.png]]
452 452  
453 453  First, input the End device ID, AppEUI and DevEUI.
454 454  
455 -[[image:1652423022781-339.png||height="365" width="741"]]
456 456  
504 +[[image:1657094646429-966.png]]
505 +
457 457  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
458 458  
459 -[[image:1652423046741-467.png||height="355" width="736"]]
460 460  
509 +[[image:1657094674045-755.png]]
510 +
461 461  (((
462 462  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
513 +
514 +
463 463  )))
464 464  
465 465  (((
... ... @@ -470,36 +470,40 @@
470 470  (% style="color:red" %)Note that it may take some time for the device data to appear in the TTN v3 display.
471 471  )))
472 472  
473 -[[image:1652423277549-324.png||height="273" width="745"]]
525 +[[image:1657094791060-639.png]]
474 474  
475 -= 5. Web Configure Pages =
476 476  
477 -== 5.1 Home ==
528 += 5.  Web Configure Pages =
478 478  
530 +== 5.1  Home ==
531 +
479 479  Shows the system running status.
480 480  
481 -[[image:1652423418568-752.png||height="329" width="724"]]
534 +[[image:1657094893942-726.png]]
482 482  
483 -== 5.2 LoRa Settings ==
484 484  
485 -=== 5.2.1 LoRa ~-~-> LoRa ===
537 +== 5.2  LoRa Settings ==
486 486  
539 +=== 5.2.1  LoRa ~-~-> LoRa ===
540 +
487 487  (((
488 488  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
489 489  )))
490 490  
491 491  (((
492 -Different DLOS8N hardware version can support different frequency range:
546 +Different LPS8N hardware version can support different frequency range:
493 493  )))
494 494  
495 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
496 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
549 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
550 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
497 497  
498 498  (((
499 -After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
553 +
554 +
555 +After user choose the frequency plan, he can see the actually frequency in used by checking the page (% style="color:green" %)**LogRead ~-~-> LoRa Log**
500 500  )))
501 501  
502 -[[image:1652423554776-574.png||height="380" width="740"]]
558 +[[image:1657094930903-357.png]]
503 503  
504 504  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
505 505  
... ... @@ -506,7 +506,7 @@
506 506  
507 507  === 5.2.2 LoRa ~-~-> ABP Decryption ===
508 508  
509 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
565 +The LPS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
510 510  
511 511  * No internet connection.
512 512  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -515,12 +515,13 @@
515 515  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
516 516  )))
517 517  
518 -[[image:1652423628833-467.png||height="357" width="755"]]
574 +[[image:1657095412271-942.png]]
519 519  
520 -== 5.3 LoRaWAN Settings ==
521 521  
522 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
577 +== 5.3  LoRaWAN Settings ==
523 523  
579 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
580 +
524 524  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
525 525  
526 526  [[image:1652423628833-467.png||height="357" width="755"]]
... ... @@ -527,21 +527,24 @@
527 527  
528 528  (% style="color:red" %)**Note:**
529 529  
530 -~*: User can ignore the latitude and longitude settings here, DLOS8N will use the actually value from GPS module.
587 +~*: User can ignore the latitude and longitude settings here, LPS8N will use the actually value from GPS module.
531 531  
532 532  ~**: Packet filter is to drop the unwanted LoRaWAN packet, instruction see here:
533 533  
534 534  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
535 535  
536 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
537 537  
594 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
595 +
538 538  [[image:1652428499323-384.png||height="275" width="723"]]
539 539  
540 540  (((
541 541  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
600 +
601 +
542 542  )))
543 543  
544 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
604 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
545 545  
546 546  (((
547 547  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -553,33 +553,37 @@
553 553  
554 554  [[image:1652428648903-878.png||height="266" width="731"]]
555 555  
556 -== 5.4 MQTT Settings ==
557 557  
558 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
617 +== 5.4  MQTT Settings ==
559 559  
619 +If end nodes works in ABP mode, user can configure LPS8N to transfer the data to MQTT broker,
620 +
560 560  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
561 561  
562 562  
563 563  [[image:1652428705046-212.png||height="417" width="733"]]
564 564  
565 -== 5.5 System ==
566 566  
567 -=== 5.5.1 System ~-~-> System Overview ===
627 +== 5.5  System ==
568 568  
629 +=== 5.5.1  System ~-~-> System Overview ===
630 +
569 569  Shows the system info:
570 570  
571 -[[image:1652428773760-580.png||height="408" width="728"]]
633 +[[image:1657155158184-134.png]]
572 572  
573 -=== 5.5.2 System ~-~-> General ( login settings) ===
574 574  
575 -[[image:1652428861256-300.png||height="354" width="724"]]
576 576  
637 +=== 5.5.2  System ~-~-> General ( login settings) ===
638 +
639 +[[image:1657155183982-792.png]]
640 +
577 577  (((
578 578  **__System Password:__**
579 579  )))
580 580  
581 581  (((
582 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
646 +There are two login for LPS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
583 583  )))
584 584  
585 585  (((
... ... @@ -587,51 +587,63 @@
587 587  )))
588 588  
589 589  (((
590 -**__Timezone:__**Set device timezone.
654 +**__Timezone:  __**Set device timezone.
591 591  )))
592 592  
593 593  (((
594 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
658 +**__Port forwarding:  __**Enable/Disable the HTTP and SSH access via WAN interface.
659 +
660 +
661 +
595 595  )))
596 596  
597 -=== 5.5.3 System ~-~-> Network ===
664 +=== 5.5.3  System ~-~-> Network ===
598 598  
599 -[[image:1652429149053-824.png||height="467" width="725"]]
666 +[[image:1657155288223-566.png]]
600 600  
601 601  (((
602 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
669 +**__LAN Settings:  __**When the LPS8N has the AP enable, LAN settings specify the network info for LPS8N's own network.
603 603  )))
604 604  
605 605  (((
606 -__**WAN Settings:**__Setting for DLOS8N WAN port
673 +__**WAN Settings:  **__Setting for LPS8N WAN port
607 607  )))
608 608  
609 609  (((
610 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
677 +__**WiFi Settings:  **__Setting for LPS8N WiFi IP when use it as WiFi Client
611 611  
679 +
612 612  
613 613  )))
614 614  
615 -=== 5.5.4 System ~-~-> WiFi ===
683 +=== 5.5.4  System ~-~-> WiFi ===
616 616  
617 -DLOS8N WiFi Settings.
685 +LPS8N WiFi Settings.
618 618  
619 -[[image:1652429430767-921.png||height="367" width="723"]]
687 +[[image:1657155457089-430.png]]
620 620  
621 -=== 5.5.5 System ~-~-> Cellular ===
622 622  
690 +
691 +=== 5.5.5  System ~-~-> Cellular ===
692 +
623 623  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
624 624  
625 -[[image:1652429309615-825.png||height="320" width="732"]]
626 626  
627 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
696 +[[image:1657155507672-204.png]]
628 628  
629 -=== 5.5.6 System ~-~-> Network Status ===
698 +(% style="color:red" %)Note *: For LPS8N which doesn't have the cellular module, this page will shows Cellular not detected.
630 630  
631 -[[image:1652429486609-208.png||height="415" width="728"]]
632 632  
633 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
634 634  
702 +=== 5.5.6  System ~-~-> Network Status ===
703 +
704 +
705 +[[image:1657155554265-721.png]]
706 +
707 +
708 +
709 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
710 +
635 635  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
636 636  
637 637  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -652,18 +652,20 @@
652 652  [[image:1652429624400-864.png||height="432" width="716"]]
653 653  
654 654  
655 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
656 656  
657 -We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
732 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
658 658  
734 +We keep improving the LPS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
735 +
659 659  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
660 660  
661 -( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
738 +( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8N/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LIG16/Firmware]])
662 662  
663 663  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
664 664  
665 -( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
742 +( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LPS8N/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LIG16/Firmware/ChangeLog]] )
666 666  
744 +
667 667  (((
668 668  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
669 669  )))
... ... @@ -672,15 +672,16 @@
672 672  (% style="color:green" %)**Web~-~-> System~-~-> Firmware Upgrade**
673 673  )))
674 674  
675 -[[image:1652429711145-862.png||height="270" width="737"]]
753 +[[image:1657156052651-770.png]]
676 676  
677 677  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
678 678  
757 +
679 679  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
680 680  
681 681  The system will automatically boot into the new firmware after upgrade.
682 682  
683 -[[image:1652429962190-224.png||height="358" width="729"]]
762 +[[image:1657156094153-520.png]]
684 684  
685 685  (% style="color:red" %)**NOTE***(%%): User can also upgrade firmware via Linux console
686 686  
... ... @@ -688,17 +688,21 @@
688 688  
689 689  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
690 690  
770 +
691 691  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
692 692  
693 -=== 5.5.9 System ~-~-> Reboot/Reset ===
694 694  
774 +=== 5.5.9  System ~-~-> Reboot/Reset ===
775 +
695 695  [[image:1652430197132-330.png||height="256" width="724"]]
696 696  
697 697  (((
698 698  
780 +
781 +
699 699  )))
700 700  
701 -=== 5.5.10 System ~-~-> Package Maintain ===
784 +=== 5.5.10  System ~-~-> Package Maintain ===
702 702  
703 703  [[image:1652430243826-126.png||height="289" width="723"]]
704 704  
1657086105922-299.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.1 KB
Content
1657086192720-649.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.7 KB
Content
1657088560833-398.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +180.6 KB
Content
1657088818095-182.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657090855037-497.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +240.1 KB
Content
1657090932270-444.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657091099235-452.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.1 KB
Content
1657091257648-882.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +167.7 KB
Content
1657091583941-544.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657091719947-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content
1657091739530-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.0 KB
Content
1657091941182-367.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657094130908-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.3 KB
Content
1657094183213-301.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.0 KB
Content
1657094202420-798.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +165.1 KB
Content
1657094221515-510.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
1657094249818-468.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +128.2 KB
Content
1657094333704-207.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +149.9 KB
Content
1657094382177-591.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +202.7 KB
Content
1657094417175-831.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657094444802-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1657094475730-208.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +47.0 KB
Content
1657094646429-966.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
1657094674045-755.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.7 KB
Content
1657094791060-639.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.9 KB
Content
1657094893942-726.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +185.3 KB
Content
1657094930903-357.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +125.7 KB
Content
1657095412271-942.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +54.2 KB
Content
1657155158184-134.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +69.0 KB
Content
1657155183982-792.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
1657155288223-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
1657155457089-430.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
1657155507672-204.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.0 KB
Content
1657155554265-721.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +90.5 KB
Content
1657155630849-656.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.9 KB
Content
1657156052651-770.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
1657156094153-520.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
1657156156755-811.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
image-20220706155323-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.7 KB
Content
image-20220706155323-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +74.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0