Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 98.1 >
edited by Xiaoling
on 2022/07/05 16:53
To version < 123.10 >
edited by Xiaoling
on 2022/07/06 09:54
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -17,9 +17,9 @@
17 17  
18 18  
19 19  
20 -= 1. Introduction =
20 += 1.  Introduction =
21 21  
22 -== 1.1 What is the DLOS8N ==
22 +== 1.1  What is the LG308N ==
23 23  
24 24  
25 25  (((
... ... @@ -47,10 +47,10 @@
47 47  [[image:1657010949218-224.png]]
48 48  
49 49  
50 -== 1.2 Specifications ==
50 +== 1.2  Specifications ==
51 51  
52 52  
53 -**Hardware System:**
53 +(% style="color:#037691" %)**Hardware System:**
54 54  
55 55  (((
56 56   Linux Part:
... ... @@ -60,10 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +(% style="color:#037691" %)**Interface:**
63 63  
64 -
65 -**Interface:**
66 -
67 67  * 10M/100M RJ45 Ports x 2
68 68  * WiFi : 802.11 b/g/n
69 69  * LoRaWAN Wireless
... ... @@ -73,10 +73,8 @@
73 73  * Mini-PCI E connector x 1
74 74  * SX1302 + 2 x SX1250
75 75  
74 +(% style="color:#037691" %)**WiFi Spec:**
76 76  
77 -
78 -**WiFi Spec:**
79 -
80 80  * IEEE 802.11 b/g/n
81 81  * Frequency Band: 2.4 ~~ 2.462GHz
82 82  * Tx power:
... ... @@ -88,10 +88,8 @@
88 88  ** 11g 54M : -71dbm
89 89  ** 11n 20M : -67dbm
90 90  
87 +(% style="color:#037691" %)**LoRa Spec:**
91 91  
92 -
93 -**LoRa Spec:**
94 -
95 95  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
96 96  * 70 dB CW interferer rejection at 1 MHz offset
97 97  * Able to operate with negative SNR, CCR up to 9dB
... ... @@ -101,10 +101,8 @@
101 101  * Dynamic data-rate (DDR) adaptation
102 102  * True antenna diversity or simultaneous dual-band operation
103 103  
98 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
104 104  
105 -
106 -**Cellular 4G LTE (optional):**
107 -
108 108  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
109 109  * Standard Size SIM Slot
110 110  * 2 x 4G Sticker Antenna.
... ... @@ -114,8 +114,8 @@
114 114  
115 115  
116 116  
117 -== 1.3 Features ==
118 118  
110 +== 1.3  Features ==
119 119  
120 120  * Open Source Linux system
121 121  * Managed by Web GUI, SSH via LAN or WiFi
... ... @@ -126,100 +126,110 @@
126 126  
127 127  
128 128  
129 -== 1.4 Hardware System Structure ==
121 +== 1.4  Hardware System Structure ==
130 130  
131 -[[image:1652411641871-482.png||height="416" width="716"]]
123 +[[image:1657011152828-178.png]]
132 132  
133 133  
134 -== 1.5 DLOS8N Applications ==
126 +== 1.5  LG308N Applications ==
135 135  
136 -[[image:1652411671209-920.png||height="618" width="650"]]
137 137  
129 +[[image:1657011208596-209.png]]
138 138  
139 -== 1.6 LED Indicators ==
140 140  
141 -[[image:1652411720670-489.png]]
132 +== 1.6  LED Indicators ==
142 142  
134 +LG308N has totally 6 LEDs, They are:
143 143  
144 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
136 +* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
137 +* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet. 
138 +* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :  This** LED** will shows different colors on different state:
139 +** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
140 +** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
141 +** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
145 145  
143 +* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
144 +* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:  This LED shows the WiFi interface connection status.
145 +
146 146  (((
147 -(((
148 -* (((
149 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
147 +(% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
150 150  )))
151 -)))
152 152  
153 -* (((
154 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
155 -)))
156 -* (((
157 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
158 158  
159 -
160 -
151 +(((
152 +(((
161 161  
162 162  )))
163 163  )))
164 164  
165 -== 1.7 WiFi Direction ==
157 += 2.  Access and Configure LG308N =
166 166  
167 -DLOS8N use directional WiFi Antenna. The best direction is as below:
159 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
168 168  
169 -[[image:1652412859663-161.png||height="341" width="333"]]
170 170  
171 -= 2. Access and Configure DLOS8N =
162 +== 2.1  Find IP address of LG308N ==
172 172  
173 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
164 +=== 2.1.1  Connect via WiFi ===
174 174  
166 +[[image:1657011715859-829.png]]
175 175  
176 -== 2.1 Find IP address of DLOS8N ==
177 177  
178 -=== 2.1.1 Connect via WiFi ===
169 +At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
179 179  
180 -[[image:1652412985720-934.png]]
171 +(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
181 181  
182 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
183 -
184 184  [[image:1652413127647-377.png]]
185 185  
186 -(% style="background-color:#ffffcc" %)dragino+dragino
187 187  
188 188  (((
189 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
177 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
190 190  
191 191  
192 192  )))
193 193  
194 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
182 +=== 2.1.2  Connect via WAN port with DHCP IP from router ===
195 195  
196 -[[image:1652414114583-532.png]]
184 +[[image:1657011966663-484.png]]
197 197  
198 -
199 199  (((
200 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
187 +Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
188 +)))
201 201  
190 +
191 +(((
202 202  
203 203  )))
204 204  
205 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
195 +=== 2.1.3  Connect via LAN port with direct connection from PC ===
206 206  
207 -[[image:1652414137639-956.png]]
197 +[[image:1657012061799-674.png]]
208 208  
199 +(((
200 +The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
201 +)))
209 209  
210 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
211 211  
212 212  
213 -=== 2.1.4 Connect via Ethernet with fall back ip ===
205 +=== 2.1.4  Connect WiFi with DHCP IP from router ===
214 214  
215 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
207 +[[image:image-20220705171041-7.png]]
216 216  
217 217  
218 -== 2.2 Access Configure Web UI ==
210 +If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
219 219  
212 +
213 +
214 +=== 2.1.5  Connect via LAN port by fall back ip ===
215 +
216 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
217 +
218 +
219 +
220 +== 2.2  Access Configure Web UI ==
221 +
220 220  **Web Interface**
221 221  
222 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
224 +Open a browser on the PC and type the LG308N ip address (depends on your connect method)
223 223  
224 224  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
225 225  
... ... @@ -238,34 +238,36 @@
238 238  
239 239  [[image:1652414287022-223.png]]
240 240  
241 -= 3. Typical Network Setup =
242 242  
243 -== 3.1 Overview ==
244 += 3.  Typical Network Setup =
244 244  
245 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
246 +== 3.1  Overview ==
246 246  
248 +(((
249 +LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
250 +)))
251 +
247 247  * **WAN Port Internet Mode**
248 248  * **WiFi Client Mode**
249 249  * **WiFi AP Mode**
250 250  * **Cellular Mode**
251 251  
257 +== 3.2  Use WAN port to access Internet ==
252 252  
253 -== 3.2 Use WAN port to access Internet ==
254 -
255 255  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
256 256  
257 -[[image:1652420169255-959.png]]
261 +[[image:1657012559318-672.png]]
258 258  
259 259  
260 260  == 3.3 Access the Internet as a WiFi Client ==
261 261  
262 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
266 +In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
263 263  
264 264  (((
265 265  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
266 266  )))
267 267  
268 -[[image:1652420327792-211.png]]
272 +[[image:1657012573321-862.png]]
269 269  
270 270  (((
271 271  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
... ... @@ -273,19 +273,21 @@
273 273  
274 274  )))
275 275  
276 -== 3.4 Access the Internet via Cellular ==
280 +== 3.4  Use built-in 4G modem for internet access ==
277 277  
278 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
282 +If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
279 279  
280 -(((
281 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
282 -)))
283 283  
284 -[[image:1652420606018-181.png]]
285 +First, install the Micro SIM card as below direction
285 285  
287 +Second, Power off/ ON LG308N to let it detect the SIM card.
286 286  
289 +[[image:image-20220705171836-8.png]]
290 +
291 +
292 +
287 287  (((
288 -[[image:1652420718132-929.png||height="427" width="727"]]
294 +
289 289  )))
290 290  
291 291  (((
... ... @@ -294,53 +294,55 @@
294 294  
295 295  (((
296 296  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
303 +
304 +
297 297  )))
298 298  
299 299  (((
300 -[[image:1652421032117-341.png||height="329" width="752"]]
308 +[[image:image-20220705171919-9.png]]
301 301  )))
302 302  
303 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
304 304  
312 +== 3.5  Check Internet connection ==
305 305  
306 -== 3.5 Check Internet connection ==
307 -
308 308  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
309 309  
310 310  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
311 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
312 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
317 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
318 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
313 313  
314 -[[image:1652421351382-793.png||height="339" width="765"]]
320 +[[image:1657012821329-972.png]]
315 315  
316 316  
317 -= 4. Example: Configure as a LoRaWAN gateway =
323 += 4.  Example: Configure as a LoRaWAN gateway =
318 318  
319 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
325 +LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
320 320  
321 321  (((
322 -[[image:image-20220513140429-1.png||height="565" width="824"]]
328 +[[image:1657012860422-990.png]]
323 323  )))
324 324  
325 -This chapter describes how to use the DLOS8Nto work with
331 +This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
326 326  
327 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
328 328  
334 +== 4.1  Create a gateway in TTN V3 Server ==
329 329  
330 -== 4.1 Create a gateway in TTN V3 Server ==
331 331  
332 332  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
333 333  
334 334  (((
335 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
340 +Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
336 336  )))
337 337  
338 338  (((
339 -[[image:1652421929753-168.png||height="403" width="739"]]
344 +[[image:1657013108723-531.png]]
345 +
346 +
340 340  )))
341 341  
342 -The example gateway id is: **a840411e96744154**
349 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
343 343  
351 +
344 344  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
345 345  
346 346  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -347,6 +347,7 @@
347 347  
348 348  [[image:1652422127479-258.png||height="346" width="738"]]
349 349  
358 +
350 350  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
351 351  
352 352  (((
... ... @@ -355,11 +355,12 @@
355 355  
356 356  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
357 357  
358 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
359 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
360 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
361 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
362 362  
368 +* Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
369 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
370 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
371 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
372 +
363 363  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
364 364  
365 365  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -370,8 +370,10 @@
370 370  
371 371   [[image:1652422470352-518.png||height="391" width="716"]]
372 372  
383 +
373 373  [[image:1652422479876-297.png||height="398" width="729"]]
374 374  
386 +
375 375  (((
376 376  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
377 377  )))
... ... @@ -381,14 +381,14 @@
381 381  [[image:1652422509034-682.png||height="299" width="739"]]
382 382  
383 383  
384 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
396 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
385 385  
386 386  (((
387 -You can now configure the DLOS8N to let it connect to TTN network V3.
399 +You can now configure the LG308N to let it connect to TTN network V3.
388 388  )))
389 389  
390 390  (((
391 -Make sure your DLOS8N has a working Internet Connection first.
403 +Make sure your LG308N has a working Internet Connection first.
392 392  )))
393 393  
394 394  (((
... ... @@ -399,19 +399,22 @@
399 399  
400 400  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
401 401  
414 +
402 402  In the home page, we can see the LoRaWAN connection is ready now.
403 403  
404 -[[image:1652422685063-596.png||height="327" width="729"]]
417 +[[image:1657014479765-850.png]]
405 405  
419 +
406 406  In TTN v3 portal, we can also see the gateway is connected.
407 407  
408 408  [[image:1652422703020-955.png||height="343" width="730"]]
409 409  
410 410  
411 -== 4.3 Configure frequency ==
425 +== 4.3  Configure frequency ==
412 412  
413 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
427 +We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
414 414  
429 +
415 415  [[image:1652422737399-529.png||height="362" width="737"]]
416 416  
417 417  
... ... @@ -420,7 +420,7 @@
420 420   [[image:1652422763536-750.png||height="514" width="730"]]
421 421  
422 422  
423 -== 4.4 Add a LoRaWAN End Device ==
438 +== 4.4  Add a LoRaWAN End Device ==
424 424  
425 425  (((
426 426  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
... ... @@ -445,13 +445,18 @@
445 445  * APP Key - Unique key to secure communications with a particular device.
446 446  
447 447  (((
463 +
464 +
448 448  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
449 449  )))
450 450  
451 451  [[image:1652422840936-838.png]]
452 452  
470 +
453 453  (((
454 454  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
473 +
474 +
455 455  )))
456 456  
457 457  (((
... ... @@ -462,10 +462,12 @@
462 462  Select **Add Application** to open the screen below.
463 463  )))
464 464  
465 -[[image:1652422946999-255.png||height="356" width="744"]]
485 +[[image:1657014671459-433.png]]
466 466  
487 +
467 467  Open the **Application **select** Add end device**
468 468  
490 +
469 469  Start Register the end device
470 470  
471 471  [[image:1652422975885-591.png||height="359" width="726"]]
... ... @@ -472,6 +472,8 @@
472 472  
473 473  (((
474 474  Select OTAA activation mode
497 +
498 +
475 475  )))
476 476  
477 477  (((
... ... @@ -482,14 +482,18 @@
482 482  
483 483  First, input the End device ID, AppEUI and DevEUI.
484 484  
509 +
485 485  [[image:1652423022781-339.png||height="365" width="741"]]
486 486  
487 487  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
488 488  
514 +
489 489  [[image:1652423046741-467.png||height="355" width="736"]]
490 490  
491 491  (((
492 492  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
519 +
520 +
493 493  )))
494 494  
495 495  (((
... ... @@ -503,18 +503,18 @@
503 503  [[image:1652423277549-324.png||height="273" width="745"]]
504 504  
505 505  
506 -= 5. Web Configure Pages =
534 += 5.  Web Configure Pages =
507 507  
508 -== 5.1 Home ==
536 +== 5.1  Home ==
509 509  
510 510  Shows the system running status.
511 511  
512 -[[image:1652423418568-752.png||height="329" width="724"]]
540 +[[image:1657014949846-507.png]]
513 513  
514 514  
515 -== 5.2 LoRa Settings ==
543 +== 5.2  LoRa Settings ==
516 516  
517 -=== 5.2.1 LoRa ~-~-> LoRa ===
545 +=== 5.2.1  LoRa ~-~-> LoRa ===
518 518  
519 519  (((
520 520  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
... ... @@ -521,11 +521,11 @@
521 521  )))
522 522  
523 523  (((
524 -Different DLOS8N hardware version can support different frequency range:
552 +Different LG308N hardware version can support different frequency range:
525 525  )))
526 526  
527 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
528 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
555 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
556 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
529 529  
530 530  (((
531 531  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
... ... @@ -536,14 +536,16 @@
536 536  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
537 537  
538 538  
539 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
567 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
540 540  
541 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
569 +The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
542 542  
543 543  * No internet connection.
544 544  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
545 545  
546 546  (((
575 +
576 +
547 547  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
548 548  )))
549 549  
... ... @@ -550,9 +550,9 @@
550 550  [[image:1652423628833-467.png||height="357" width="755"]]
551 551  
552 552  
553 -== 5.3 LoRaWAN Settings ==
583 +== 5.3  LoRaWAN Settings ==
554 554  
555 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
585 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
556 556  
557 557  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
558 558  
... ... @@ -567,8 +567,9 @@
567 567  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
568 568  
569 569  
570 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
571 571  
601 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
602 +
572 572  [[image:1652428499323-384.png||height="275" width="723"]]
573 573  
574 574  
... ... @@ -575,10 +575,11 @@
575 575  (((
576 576  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
577 577  
609 +
578 578  
579 579  )))
580 580  
581 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
613 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
582 582  
583 583  (((
584 584  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -591,9 +591,9 @@
591 591  [[image:1652428648903-878.png||height="266" width="731"]]
592 592  
593 593  
594 -== 5.4 MQTT Settings ==
626 +== 5.4  MQTT Settings ==
595 595  
596 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
628 +If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
597 597  
598 598  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
599 599  
... ... @@ -601,17 +601,19 @@
601 601  [[image:1652428705046-212.png||height="417" width="733"]]
602 602  
603 603  
604 -== 5.5 System ==
605 605  
606 -=== 5.5.1 System ~-~-> System Overview ===
637 +== 5.5  System ==
607 607  
639 +=== 5.5.1  System ~-~-> System Overview ===
640 +
608 608  Shows the system info:
609 609  
610 610  [[image:1652428773760-580.png||height="408" width="728"]]
611 611  
612 612  
613 -=== 5.5.2 System ~-~-> General ( login settings) ===
614 614  
647 +=== 5.5.2  System ~-~-> General ( login settings) ===
648 +
615 615  [[image:1652428861256-300.png||height="354" width="724"]]
616 616  
617 617  (((
... ... @@ -619,7 +619,7 @@
619 619  )))
620 620  
621 621  (((
622 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
656 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
623 623  )))
624 624  
625 625  (((
... ... @@ -627,56 +627,60 @@
627 627  )))
628 628  
629 629  (((
630 -**__Timezone:__**Set device timezone.
664 +**__Timezone: __**Set device timezone.
631 631  )))
632 632  
633 633  (((
634 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
668 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
635 635  
670 +
636 636  
637 637  )))
638 638  
639 -=== 5.5.3 System ~-~-> Network ===
674 +=== 5.5.3  System ~-~-> Network ===
640 640  
641 641  [[image:1652429149053-824.png||height="467" width="725"]]
642 642  
643 643  (((
644 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
679 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
645 645  )))
646 646  
647 647  (((
648 -__**WAN Settings:**__Setting for DLOS8N WAN port
683 +__**WAN Settings: **__Setting for LG308N WAN port
649 649  )))
650 650  
651 651  (((
652 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
653 -
654 -
687 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
655 655  )))
656 656  
657 -=== 5.5.4 System ~-~-> WiFi ===
658 658  
659 -DLOS8N WiFi Settings.
660 660  
692 +=== 5.5.4  System ~-~-> WiFi ===
693 +
694 +LG308N WiFi Settings.
695 +
661 661  [[image:1652429430767-921.png||height="367" width="723"]]
662 662  
663 663  
664 -=== 5.5.5 System ~-~-> Cellular ===
665 665  
700 +=== 5.5.5  System ~-~-> Cellular ===
701 +
666 666  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
667 667  
668 668  [[image:1652429309615-825.png||height="320" width="732"]]
669 669  
670 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
706 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
671 671  
672 672  
673 -=== 5.5.6 System ~-~-> Network Status ===
674 674  
710 +=== 5.5.6  System ~-~-> Network Status ===
711 +
675 675  [[image:1652429486609-208.png||height="415" width="728"]]
676 676  
677 677  
678 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
679 679  
716 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
717 +
680 680  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
681 681  
682 682  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -687,8 +687,10 @@
687 687  
688 688  Please see this document for detail:
689 689  
728 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
729 +
690 690  (((
691 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
731 +
692 692  )))
693 693  
694 694  
... ... @@ -697,8 +697,9 @@
697 697  [[image:1652429624400-864.png||height="432" width="716"]]
698 698  
699 699  
700 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
701 701  
741 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
742 +
702 702  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
703 703  
704 704  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -705,10 +705,12 @@
705 705  
706 706  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
707 707  
749 +
708 708  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
709 709  
710 710  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
711 711  
754 +
712 712  (((
713 713  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
714 714  )))
... ... @@ -719,6 +719,7 @@
719 719  
720 720  [[image:1652429711145-862.png||height="270" width="737"]]
721 721  
765 +
722 722  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
723 723  
724 724  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -733,18 +733,22 @@
733 733  
734 734  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
735 735  
780 +
736 736  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
737 737  
738 738  
739 -=== 5.5.9 System ~-~-> Reboot/Reset ===
740 740  
785 +=== 5.5.9  System ~-~-> Reboot/Reset ===
786 +
741 741  [[image:1652430197132-330.png||height="256" width="724"]]
742 742  
743 743  (((
744 744  
791 +
792 +
745 745  )))
746 746  
747 -=== 5.5.10 System ~-~-> Package Maintain ===
795 +=== 5.5.10  System ~-~-> Package Maintain ===
748 748  
749 749  [[image:1652430243826-126.png||height="289" width="723"]]
750 750  
... ... @@ -751,52 +751,45 @@
751 751  Place to show what package has installed and possible to upgrade packages.
752 752  
753 753  
754 -== 5.6 LogRead ==
755 755  
756 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
803 +== 5.6  LogRead ==
757 757  
805 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
758 758  
759 759  Show the frequency for LoRa Radio and traffics.
760 760  
761 -[[image:image-20220615204306-1.png||height="575" width="733"]]
809 +[[image:1657069890320-513.png]]
762 762  
763 763  
764 -Show the IoT Server Connection State and FWD State
765 765  
766 -[[image:image-20220616083933-1.png||height="556" width="729"]]
767 767  
768 -DLOS8 can view GPS location in the Logread FWD State
814 +=== 5.6.2  LogRead ~-~-> System Log ===
769 769  
816 +Show the system log
770 770  
771 -Show the Error logs, RxTxJson lorawan packages, and PULL State
818 +[[image:1657069922599-794.png]]
772 772  
773 -[[image:image-20220615205416-6.png||height="442" width="884"]]
774 774  
775 775  
776 -=== 5.6.2 LogRead ~-~-> System Log ===
822 += 6.  More features =
777 777  
778 -Show the system log
824 +== 6.1  More instructions ==
779 779  
780 -[[image:1652430369760-511.png||height="373" width="730"]]
781 -
782 -= 6. More features =
783 -
784 -== 6.1 More instructions ==
785 -
786 786  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
787 787  
788 788  
789 -= 7. Linux System =
790 790  
791 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
830 += 7.  Linux System =
792 792  
832 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
793 793  
794 -== 7.1 SSH Access for Linux console ==
795 795  
796 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
835 +== 7.1  SSH Access for Linux console ==
797 797  
798 -IP address:  IP address of DLOS8N
837 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
799 799  
839 +IP address:  IP address of LG308N
840 +
800 800  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
801 801  
802 802  User Name:      (% style="color:green" %)**root**
... ... @@ -803,19 +803,22 @@
803 803  
804 804  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
805 805  
847 +
806 806  After logging in, you will be in the Linux console and can enter commands as shown below.
807 807  
808 808  [[image:1652431588565-830.png]]
809 809  
852 +
810 810  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
811 811  
812 -[[image:1652431609193-637.png||height="214" width="732"]]
855 +[[image:1657070133275-283.png]]
813 813  
814 814  
815 -== 7.2 Edit and Transfer files ==
816 816  
859 +== 7.2  Edit and Transfer files ==
860 +
817 817  (((
818 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
862 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
819 819  )))
820 820  
821 821  (((
... ... @@ -823,7 +823,7 @@
823 823  )))
824 824  
825 825  (((
826 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
870 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
827 827  )))
828 828  
829 829  (((
... ... @@ -833,25 +833,25 @@
833 833  [[image:1652431650755-450.png]]
834 834  
835 835  
836 -== 7.3 File System ==
880 +== 7.3  File System ==
837 837  
838 838  (((
839 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
840 -)))
841 -
842 842  (((
843 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
884 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
844 844  )))
845 845  
887 +
846 846  (((
847 -You can use an external USB flash memory device to extend the size of flash memory for storage.
889 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
848 848  )))
891 +)))
849 849  
850 850  
851 -== 7.4 Package maintenance system ==
852 852  
853 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
895 +== 7.4  Package maintenance system ==
854 854  
897 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
898 +
855 855  (((
856 856  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
857 857  )))
... ... @@ -901,15 +901,19 @@
901 901  
902 902  (((
903 903  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
948 +
949 +
950 +
904 904  )))
905 905  
906 -= 8. Upgrade Linux Firmware =
953 += 8.  Upgrade Linux Firmware =
907 907  
908 908  
909 -= 9. FAQ =
910 910  
911 -== 9.1 How can I configure for a customized frequency band? ==
957 += 9.  FAQ =
912 912  
959 +== 9.1  How can I configure for a customized frequency band? ==
960 +
913 913  (((
914 914  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
915 915  )))
... ... @@ -918,15 +918,15 @@
918 918  
919 919  )))
920 920  
921 -== 9.2 Can I connect DLOS8N to LORIOT? ==
969 +== 9.2  Can I connect DLOS8N to LORIOT? ==
922 922  
923 923  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
924 924  
925 925  
926 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
974 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
927 927  
928 928  (((
929 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
977 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
930 930  )))
931 931  
932 932  (((
... ... @@ -934,11 +934,37 @@
934 934  )))
935 935  
936 936  
937 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
985 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
938 938  
939 939  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
940 940  
941 941  
990 +== 9.5  Can I control the LEDs? ==
991 +
992 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
993 +
994 +
995 +(% style="color:blue" %)**Control Globe LED:**
996 +
997 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
998 +
999 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
1000 +
1001 +
1002 +(% style="color:blue" %)**Control HEART LED:**
1003 +
1004 +First export the gpio27 and set to out
1005 +
1006 +echo 27 > /sys/class/gpio/export
1007 +
1008 +echo out > /sys/class/gpio/gpio27/direction
1009 +
1010 +ON: echo 0 > /sys/class/gpio/gpio27/value
1011 +
1012 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1013 +
1014 +
1015 +
942 942  = 10. Trouble Shooting =
943 943  
944 944  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -964,8 +964,9 @@
964 964  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
965 965  
966 966  
967 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
968 968  
1042 +== 10.2  How to recover the LG308N if the firmware crashes ==
1043 +
969 969  (((
970 970  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
971 971  )))
... ... @@ -974,12 +974,12 @@
974 974  
975 975  )))
976 976  
977 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1052 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
978 978  
979 -[[image:1652435238615-272.png||height="247" width="727"]]
1054 +[[image:1657071488240-907.png]]
980 980  
981 981  (((
982 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1057 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
983 983  )))
984 984  
985 985  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -987,37 +987,37 @@
987 987  
988 988  Steps to connect via fall back IP:
989 989  
990 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1065 +~1. Connect PC's Ethernet port to LG01's LAN port
991 991  
992 -2. Configure PC’s Ethernet port has
993 - IP: 172.31.255.253 and
994 - Netmask: 255.255.255.252
1067 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
995 995  
996 996  As below photo:
997 997  
998 998  [[image:1652435256286-879.png]]
999 999  
1000 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1073 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1001 1001  
1002 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1003 1003  
1004 1004  
1005 1005  = 11. Order Info =
1006 1006  
1007 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1008 1008  
1009 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1080 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1010 1010  
1011 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1012 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1082 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1013 1013  
1014 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1084 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1085 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1015 1015  
1016 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1017 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1018 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1019 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1087 +(% style="color:#4f81bd" %)
1020 1020  
1089 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1090 +
1091 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1092 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1093 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1094 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1095 +
1021 1021  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1022 1022  
1023 1023  
... ... @@ -1024,14 +1024,19 @@
1024 1024  = 12. Packing Info =
1025 1025  
1026 1026  (((
1102 +
1103 +
1027 1027  **Package Includes**:
1028 -)))
1029 1029  
1030 -* DLOS8N LoRaWAN Gateway x 1
1031 -* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1106 +* LG308N or LG08 LoRa Gateway x 1
1107 +* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1108 +* Power Adapter: EU/AU/US type power adapter depends on country to be used
1032 1032  * Packaging with environmental protection paper box
1110 +)))
1033 1033  
1034 1034  (((
1113 +
1114 +
1035 1035  **Dimension and weight**:
1036 1036  )))
1037 1037  
... ... @@ -1041,6 +1041,7 @@
1041 1041  * Weight: 2.5kg
1042 1042  
1043 1043  
1124 +
1044 1044  = 13. Support =
1045 1045  
1046 1046  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657011715859-829.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.4 KB
Content
1657011966663-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
1657012061799-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.1 KB
Content
1657012559318-672.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +151.6 KB
Content
1657012573321-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657012821329-972.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657012860422-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +155.0 KB
Content
1657013108723-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657014479765-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1657014671459-433.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657014949846-507.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
image-20220705165446-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220705165446-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +4.1 KB
Content
image-20220705171041-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.7 KB
Content
image-20220705171836-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +157.9 KB
Content
image-20220705171919-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0