Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 96.2 >
edited by Xiaoling
on 2022/07/05 16:51
To version < 123.10 >
edited by Xiaoling
on 2022/07/06 09:54
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -17,9 +17,9 @@
17 17  
18 18  
19 19  
20 -= 1. Introduction =
20 += 1.  Introduction =
21 21  
22 -== 1.1 What is the DLOS8N ==
22 +== 1.1  What is the LG308N ==
23 23  
24 24  
25 25  (((
... ... @@ -47,10 +47,10 @@
47 47  [[image:1657010949218-224.png]]
48 48  
49 49  
50 -== 1.2 Specifications ==
50 +== 1.2  Specifications ==
51 51  
52 52  
53 -**Hardware System:**
53 +(% style="color:#037691" %)**Hardware System:**
54 54  
55 55  (((
56 56   Linux Part:
... ... @@ -60,10 +60,8 @@
60 60  * 64MB RAM
61 61  * 16MB Flash
62 62  
63 +(% style="color:#037691" %)**Interface:**
63 63  
64 -
65 -**Interface:**
66 -
67 67  * 10M/100M RJ45 Ports x 2
68 68  * WiFi : 802.11 b/g/n
69 69  * LoRaWAN Wireless
... ... @@ -73,10 +73,8 @@
73 73  * Mini-PCI E connector x 1
74 74  * SX1302 + 2 x SX1250
75 75  
74 +(% style="color:#037691" %)**WiFi Spec:**
76 76  
77 -
78 -**WiFi Spec:**
79 -
80 80  * IEEE 802.11 b/g/n
81 81  * Frequency Band: 2.4 ~~ 2.462GHz
82 82  * Tx power:
... ... @@ -88,10 +88,8 @@
88 88  ** 11g 54M : -71dbm
89 89  ** 11n 20M : -67dbm
90 90  
87 +(% style="color:#037691" %)**LoRa Spec:**
91 91  
92 -
93 -**LoRa Spec:**
94 -
95 95  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
96 96  * 70 dB CW interferer rejection at 1 MHz offset
97 97  * Able to operate with negative SNR, CCR up to 9dB
... ... @@ -101,10 +101,8 @@
101 101  * Dynamic data-rate (DDR) adaptation
102 102  * True antenna diversity or simultaneous dual-band operation
103 103  
98 +(% style="color:#037691" %)**Cellular 4G LTE (optional):**
104 104  
105 -
106 -**Cellular 4G LTE (optional):**
107 -
108 108  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
109 109  * Standard Size SIM Slot
110 110  * 2 x 4G Sticker Antenna.
... ... @@ -114,120 +114,122 @@
114 114  
115 115  
116 116  
117 -== 1.3 Features ==
118 118  
119 -* Open Source Embedded Linux system
110 +== 1.3  Features ==
111 +
112 +* Open Source Linux system
120 120  * Managed by Web GUI, SSH via LAN or WiFi
121 -* Support Semtech UDP packet forwarder
122 -* Support LoRaWAN Station Connection
123 -* Cellular Failover conntection(option)
124 -* Direct Communication to LoRaWAN ABP Node
125 -* LoRaWAN packet filtering
126 -* Far seeing LED indicator
127 -* Built-in GPS module for location & timing
128 -* External fiber glass antenna
129 -* Auto-Provision
130 -* Remote Monitoring
131 -* 802.3af PoE
132 -* IP65
133 -* Lighting Protection
134 -* Power Consumption:12v ,300-500mA
114 +* Emulates 49x LoRa demodulators
115 +* LoRaWAN Gateway
116 +* 10 programmable parallel demodulation paths
135 135  
136 136  
137 -== 1.4 Hardware System Structure ==
138 138  
139 -[[image:1652411641871-482.png||height="416" width="716"]]
140 140  
121 +== 1.4  Hardware System Structure ==
141 141  
142 -== 1.5 DLOS8N Applications ==
123 +[[image:1657011152828-178.png]]
143 143  
144 -[[image:1652411671209-920.png||height="618" width="650"]]
145 145  
126 +== 1.5  LG308N Applications ==
146 146  
147 -== 1.6 LED Indicators ==
148 148  
149 -[[image:1652411720670-489.png]]
129 +[[image:1657011208596-209.png]]
150 150  
151 151  
152 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
132 +== 1.6  LED Indicators ==
153 153  
154 -(((
155 -(((
156 -* (((
157 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
158 -)))
159 -)))
134 +LG308N has totally 6 LEDs, They are:
160 160  
161 -* (((
162 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
163 -)))
164 -* (((
165 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
136 +* **Power LED  **[[image:image-20220705165446-1.png||height="15" width="16"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
137 +* **HEART LED **[[image:image-20220705165446-2.png||height="16" width="15"]] : No function yet. 
138 +* **SYS LED** [[image:image-20220705165446-3.png||height="16" width="15"]] :  This** LED** will shows different colors on different state:
139 +** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
140 +** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
141 +** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
166 166  
143 +* **ETH LED** [[image:image-20220705165446-5.png||height="15" width="17"]] [[image:image-20220705165446-5.png||height="15" width="17"]]: These two LEDs show the ETH interfaces connection status.
144 +* **WiFi LED** [[image:image-20220705165446-6.png||height="15" width="15"]]** **:  This LED shows the WiFi interface connection status.
167 167  
146 +(((
147 +(% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
148 +)))
168 168  
150 +
151 +(((
152 +(((
169 169  
170 170  )))
171 171  )))
172 172  
173 -== 1.7 WiFi Direction ==
157 += 2.  Access and Configure LG308N =
174 174  
175 -DLOS8N use directional WiFi Antenna. The best direction is as below:
159 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the LG308N after connecting to its WiFi network, or via its Ethernet port.
176 176  
177 -[[image:1652412859663-161.png||height="341" width="333"]]
178 178  
179 -= 2. Access and Configure DLOS8N =
162 +== 2.1  Find IP address of LG308N ==
180 180  
181 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
164 +=== 2.1.1  Connect via WiFi ===
182 182  
166 +[[image:1657011715859-829.png]]
183 183  
184 -== 2.1 Find IP address of DLOS8N ==
185 185  
186 -=== 2.1.1 Connect via WiFi ===
169 +At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
187 187  
188 -[[image:1652412985720-934.png]]
171 +(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
189 189  
190 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
191 -
192 192  [[image:1652413127647-377.png]]
193 193  
194 -(% style="background-color:#ffffcc" %)dragino+dragino
195 195  
196 196  (((
197 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
177 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
198 198  
199 199  
200 200  )))
201 201  
202 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
182 +=== 2.1.2  Connect via WAN port with DHCP IP from router ===
203 203  
204 -[[image:1652414114583-532.png]]
184 +[[image:1657011966663-484.png]]
205 205  
206 -
207 207  (((
208 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
187 +Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
188 +)))
209 209  
190 +
191 +(((
210 210  
211 211  )))
212 212  
213 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
195 +=== 2.1.3  Connect via LAN port with direct connection from PC ===
214 214  
215 -[[image:1652414137639-956.png]]
197 +[[image:1657012061799-674.png]]
216 216  
199 +(((
200 +The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
201 +)))
217 217  
218 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
219 219  
220 220  
221 -=== 2.1.4 Connect via Ethernet with fall back ip ===
205 +=== 2.1.4  Connect WiFi with DHCP IP from router ===
222 222  
223 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
207 +[[image:image-20220705171041-7.png]]
224 224  
225 225  
226 -== 2.2 Access Configure Web UI ==
210 +If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
227 227  
212 +
213 +
214 +=== 2.1.5  Connect via LAN port by fall back ip ===
215 +
216 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
217 +
218 +
219 +
220 +== 2.2  Access Configure Web UI ==
221 +
228 228  **Web Interface**
229 229  
230 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
224 +Open a browser on the PC and type the LG308N ip address (depends on your connect method)
231 231  
232 232  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
233 233  
... ... @@ -246,34 +246,36 @@
246 246  
247 247  [[image:1652414287022-223.png]]
248 248  
249 -= 3. Typical Network Setup =
250 250  
251 -== 3.1 Overview ==
244 += 3.  Typical Network Setup =
252 252  
253 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
246 +== 3.1  Overview ==
254 254  
248 +(((
249 +LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
250 +)))
251 +
255 255  * **WAN Port Internet Mode**
256 256  * **WiFi Client Mode**
257 257  * **WiFi AP Mode**
258 258  * **Cellular Mode**
259 259  
257 +== 3.2  Use WAN port to access Internet ==
260 260  
261 -== 3.2 Use WAN port to access Internet ==
262 -
263 263  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
264 264  
265 -[[image:1652420169255-959.png]]
261 +[[image:1657012559318-672.png]]
266 266  
267 267  
268 268  == 3.3 Access the Internet as a WiFi Client ==
269 269  
270 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
266 +In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
271 271  
272 272  (((
273 273  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
274 274  )))
275 275  
276 -[[image:1652420327792-211.png]]
272 +[[image:1657012573321-862.png]]
277 277  
278 278  (((
279 279  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
... ... @@ -281,19 +281,21 @@
281 281  
282 282  )))
283 283  
284 -== 3.4 Access the Internet via Cellular ==
280 +== 3.4  Use built-in 4G modem for internet access ==
285 285  
286 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
282 +If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
287 287  
288 -(((
289 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
290 -)))
291 291  
292 -[[image:1652420606018-181.png]]
285 +First, install the Micro SIM card as below direction
293 293  
287 +Second, Power off/ ON LG308N to let it detect the SIM card.
294 294  
289 +[[image:image-20220705171836-8.png]]
290 +
291 +
292 +
295 295  (((
296 -[[image:1652420718132-929.png||height="427" width="727"]]
294 +
297 297  )))
298 298  
299 299  (((
... ... @@ -302,53 +302,55 @@
302 302  
303 303  (((
304 304  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
303 +
304 +
305 305  )))
306 306  
307 307  (((
308 -[[image:1652421032117-341.png||height="329" width="752"]]
308 +[[image:image-20220705171919-9.png]]
309 309  )))
310 310  
311 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
312 312  
312 +== 3.5  Check Internet connection ==
313 313  
314 -== 3.5 Check Internet connection ==
315 -
316 316  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
317 317  
318 318  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
319 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
320 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
317 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
318 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
321 321  
322 -[[image:1652421351382-793.png||height="339" width="765"]]
320 +[[image:1657012821329-972.png]]
323 323  
324 324  
325 -= 4. Example: Configure as a LoRaWAN gateway =
323 += 4.  Example: Configure as a LoRaWAN gateway =
326 326  
327 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
325 +LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
328 328  
329 329  (((
330 -[[image:image-20220513140429-1.png||height="565" width="824"]]
328 +[[image:1657012860422-990.png]]
331 331  )))
332 332  
333 -This chapter describes how to use the DLOS8Nto work with
331 +This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
334 334  
335 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
336 336  
334 +== 4.1  Create a gateway in TTN V3 Server ==
337 337  
338 -== 4.1 Create a gateway in TTN V3 Server ==
339 339  
340 340  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
341 341  
342 342  (((
343 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
340 +Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
344 344  )))
345 345  
346 346  (((
347 -[[image:1652421929753-168.png||height="403" width="739"]]
344 +[[image:1657013108723-531.png]]
345 +
346 +
348 348  )))
349 349  
350 -The example gateway id is: **a840411e96744154**
349 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
351 351  
351 +
352 352  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
353 353  
354 354  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -355,6 +355,7 @@
355 355  
356 356  [[image:1652422127479-258.png||height="346" width="738"]]
357 357  
358 +
358 358  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
359 359  
360 360  (((
... ... @@ -363,11 +363,12 @@
363 363  
364 364  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
365 365  
366 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
367 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
368 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
369 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
370 370  
368 +* Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
369 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
370 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
371 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
372 +
371 371  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
372 372  
373 373  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -378,8 +378,10 @@
378 378  
379 379   [[image:1652422470352-518.png||height="391" width="716"]]
380 380  
383 +
381 381  [[image:1652422479876-297.png||height="398" width="729"]]
382 382  
386 +
383 383  (((
384 384  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
385 385  )))
... ... @@ -389,14 +389,14 @@
389 389  [[image:1652422509034-682.png||height="299" width="739"]]
390 390  
391 391  
392 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
396 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
393 393  
394 394  (((
395 -You can now configure the DLOS8N to let it connect to TTN network V3.
399 +You can now configure the LG308N to let it connect to TTN network V3.
396 396  )))
397 397  
398 398  (((
399 -Make sure your DLOS8N has a working Internet Connection first.
403 +Make sure your LG308N has a working Internet Connection first.
400 400  )))
401 401  
402 402  (((
... ... @@ -407,19 +407,22 @@
407 407  
408 408  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
409 409  
414 +
410 410  In the home page, we can see the LoRaWAN connection is ready now.
411 411  
412 -[[image:1652422685063-596.png||height="327" width="729"]]
417 +[[image:1657014479765-850.png]]
413 413  
419 +
414 414  In TTN v3 portal, we can also see the gateway is connected.
415 415  
416 416  [[image:1652422703020-955.png||height="343" width="730"]]
417 417  
418 418  
419 -== 4.3 Configure frequency ==
425 +== 4.3  Configure frequency ==
420 420  
421 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
427 +We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
422 422  
429 +
423 423  [[image:1652422737399-529.png||height="362" width="737"]]
424 424  
425 425  
... ... @@ -428,7 +428,7 @@
428 428   [[image:1652422763536-750.png||height="514" width="730"]]
429 429  
430 430  
431 -== 4.4 Add a LoRaWAN End Device ==
438 +== 4.4  Add a LoRaWAN End Device ==
432 432  
433 433  (((
434 434  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
... ... @@ -453,13 +453,18 @@
453 453  * APP Key - Unique key to secure communications with a particular device.
454 454  
455 455  (((
463 +
464 +
456 456  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
457 457  )))
458 458  
459 459  [[image:1652422840936-838.png]]
460 460  
470 +
461 461  (((
462 462  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
473 +
474 +
463 463  )))
464 464  
465 465  (((
... ... @@ -470,10 +470,12 @@
470 470  Select **Add Application** to open the screen below.
471 471  )))
472 472  
473 -[[image:1652422946999-255.png||height="356" width="744"]]
485 +[[image:1657014671459-433.png]]
474 474  
487 +
475 475  Open the **Application **select** Add end device**
476 476  
490 +
477 477  Start Register the end device
478 478  
479 479  [[image:1652422975885-591.png||height="359" width="726"]]
... ... @@ -480,6 +480,8 @@
480 480  
481 481  (((
482 482  Select OTAA activation mode
497 +
498 +
483 483  )))
484 484  
485 485  (((
... ... @@ -490,14 +490,18 @@
490 490  
491 491  First, input the End device ID, AppEUI and DevEUI.
492 492  
509 +
493 493  [[image:1652423022781-339.png||height="365" width="741"]]
494 494  
495 495  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
496 496  
514 +
497 497  [[image:1652423046741-467.png||height="355" width="736"]]
498 498  
499 499  (((
500 500  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
519 +
520 +
501 501  )))
502 502  
503 503  (((
... ... @@ -511,18 +511,18 @@
511 511  [[image:1652423277549-324.png||height="273" width="745"]]
512 512  
513 513  
514 -= 5. Web Configure Pages =
534 += 5.  Web Configure Pages =
515 515  
516 -== 5.1 Home ==
536 +== 5.1  Home ==
517 517  
518 518  Shows the system running status.
519 519  
520 -[[image:1652423418568-752.png||height="329" width="724"]]
540 +[[image:1657014949846-507.png]]
521 521  
522 522  
523 -== 5.2 LoRa Settings ==
543 +== 5.2  LoRa Settings ==
524 524  
525 -=== 5.2.1 LoRa ~-~-> LoRa ===
545 +=== 5.2.1  LoRa ~-~-> LoRa ===
526 526  
527 527  (((
528 528  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
... ... @@ -529,11 +529,11 @@
529 529  )))
530 530  
531 531  (((
532 -Different DLOS8N hardware version can support different frequency range:
552 +Different LG308N hardware version can support different frequency range:
533 533  )))
534 534  
535 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
536 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
555 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
556 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
537 537  
538 538  (((
539 539  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
... ... @@ -544,14 +544,16 @@
544 544  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
545 545  
546 546  
547 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
567 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
548 548  
549 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
569 +The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
550 550  
551 551  * No internet connection.
552 552  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
553 553  
554 554  (((
575 +
576 +
555 555  Detail of this feature: **[[Communication with ABP End Node>>doc:Main.Communicate with ABP End Node without LoRaWAN Network Server --- LG308.WebHome]]**
556 556  )))
557 557  
... ... @@ -558,9 +558,9 @@
558 558  [[image:1652423628833-467.png||height="357" width="755"]]
559 559  
560 560  
561 -== 5.3 LoRaWAN Settings ==
583 +== 5.3  LoRaWAN Settings ==
562 562  
563 -=== 5.3.1 LoRaWAN ~-~-> LoRaWAN ===
585 +=== 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
564 564  
565 565  This page is for the connection set up to a general LoRaWAN Network server such as: [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]] etc
566 566  
... ... @@ -575,8 +575,9 @@
575 575  **See:** **[[Filter unwanted LoRaWAN packets>>doc:Main.Filter unwanted LoRaWAN packets.WebHome]]**
576 576  
577 577  
578 -=== 5.3.2 LoRaWAN ~-~-> Amazon AWS-IoT ===
579 579  
601 +=== 5.3.2  LoRaWAN ~-~-> Amazon AWS-IoT ===
602 +
580 580  [[image:1652428499323-384.png||height="275" width="723"]]
581 581  
582 582  
... ... @@ -583,10 +583,11 @@
583 583  (((
584 584  Please see this instruction to know more detail and demo for how to connect to **[[AWS-IoT LoRaWAN Core>>doc:Main.AWS IoT Core for LoRaWAN.WebHome]].**
585 585  
609 +
586 586  
587 587  )))
588 588  
589 -=== 5.3.3 LoRaWAN ~-~-> LORIOT ===
613 +=== 5.3.3  LoRaWAN ~-~-> LORIOT ===
590 590  
591 591  (((
592 592  Settings to communicate to LORIOT LoRaWAN Network Server: [[https:~~/~~/www.loriot.io/>>url:https://www.loriot.io/]]
... ... @@ -599,9 +599,9 @@
599 599  [[image:1652428648903-878.png||height="266" width="731"]]
600 600  
601 601  
602 -== 5.4 MQTT Settings ==
626 +== 5.4  MQTT Settings ==
603 603  
604 -If end nodes works in ABP mode, user can configure DLOS8N to transfer the data to MQTT broker,
628 +If end nodes works in ABP mode, user can configure LG308N to transfer the data to MQTT broker,
605 605  
606 606  Instruction: **[[MQTT Forward Instruction>>doc:Main.MQTT Forward Instruction.WebHome]]**
607 607  
... ... @@ -609,17 +609,19 @@
609 609  [[image:1652428705046-212.png||height="417" width="733"]]
610 610  
611 611  
612 -== 5.5 System ==
613 613  
614 -=== 5.5.1 System ~-~-> System Overview ===
637 +== 5.5  System ==
615 615  
639 +=== 5.5.1  System ~-~-> System Overview ===
640 +
616 616  Shows the system info:
617 617  
618 618  [[image:1652428773760-580.png||height="408" width="728"]]
619 619  
620 620  
621 -=== 5.5.2 System ~-~-> General ( login settings) ===
622 622  
647 +=== 5.5.2  System ~-~-> General ( login settings) ===
648 +
623 623  [[image:1652428861256-300.png||height="354" width="724"]]
624 624  
625 625  (((
... ... @@ -627,7 +627,7 @@
627 627  )))
628 628  
629 629  (((
630 -There are two login for DLOS8N: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
656 +There are two login for DLOS8: (% style="color:#4f81bd" %)root /dragino (% style="color:black" %)or (% style="color:#4f81bd" %)admin /dragino. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
631 631  )))
632 632  
633 633  (((
... ... @@ -635,56 +635,60 @@
635 635  )))
636 636  
637 637  (((
638 -**__Timezone:__**Set device timezone.
664 +**__Timezone: __**Set device timezone.
639 639  )))
640 640  
641 641  (((
642 -**__Port forwarding:__**Enable/Disable the HTTP and SSH access via WAN interface.
668 +**__Port forwarding: __**Enable/Disable the HTTP and SSH access via WAN interface.
643 643  
670 +
644 644  
645 645  )))
646 646  
647 -=== 5.5.3 System ~-~-> Network ===
674 +=== 5.5.3  System ~-~-> Network ===
648 648  
649 649  [[image:1652429149053-824.png||height="467" width="725"]]
650 650  
651 651  (((
652 -**__LAN Settings:__**When the DLOS8N has the AP enable, LAN settings specify the network info for DLOS8N’s own network.
679 +**__LAN Settings:  __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
653 653  )))
654 654  
655 655  (((
656 -__**WAN Settings:**__Setting for DLOS8N WAN port
683 +__**WAN Settings: **__Setting for LG308N WAN port
657 657  )))
658 658  
659 659  (((
660 -__**WiFi Settings:**__Setting for DLOS8N WiFi IP when use it as WiFi Client
661 -
662 -
687 +__**WiFi Settings:  **__Setting for LG308N WiFi IP when use it as WiFi Client
663 663  )))
664 664  
665 -=== 5.5.4 System ~-~-> WiFi ===
666 666  
667 -DLOS8N WiFi Settings.
668 668  
692 +=== 5.5.4  System ~-~-> WiFi ===
693 +
694 +LG308N WiFi Settings.
695 +
669 669  [[image:1652429430767-921.png||height="367" width="723"]]
670 670  
671 671  
672 -=== 5.5.5 System ~-~-> Cellular ===
673 673  
700 +=== 5.5.5  System ~-~-> Cellular ===
701 +
674 674  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
675 675  
676 676  [[image:1652429309615-825.png||height="320" width="732"]]
677 677  
678 -(% style="color:red" %)Note *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
706 +(% style="color:red" %)Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.
679 679  
680 680  
681 -=== 5.5.6 System ~-~-> Network Status ===
682 682  
710 +=== 5.5.6  System ~-~-> Network Status ===
711 +
683 683  [[image:1652429486609-208.png||height="415" width="728"]]
684 684  
685 685  
686 -=== 5.5.7 System ~-~-> Remote Mgnt & Auto Provision ===
687 687  
716 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
717 +
688 688  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
689 689  
690 690  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -695,8 +695,10 @@
695 695  
696 696  Please see this document for detail:
697 697  
728 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
729 +
698 698  (((
699 -[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LPS8/Firmware/Application_Note/&file=Auto-update-feature.pdf]]
731 +
700 700  )))
701 701  
702 702  
... ... @@ -705,8 +705,9 @@
705 705  [[image:1652429624400-864.png||height="432" width="716"]]
706 706  
707 707  
708 -=== 5.5.8 System ~-~-> Firmware Upgrade ===
709 709  
741 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
742 +
710 710  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
711 711  
712 712  * **Latest firmware**: [[LoRa Gateway Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]],
... ... @@ -713,10 +713,12 @@
713 713  
714 714  ( [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]] )
715 715  
749 +
716 716  * **Change Log**: [[Firmware Change Log>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]].
717 717  
718 718  ( [[http:~~/~~/www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog>>url:http://www.dragino.com/downloads/downloads/LoRa_Gateway/LG02-OLG02/Firmware/ChangeLog]] )
719 719  
754 +
720 720  (((
721 721  The file named as (% style="color:green" %)**xxxxx–xxxxx-squashfs-sysupgrade.bin **(% style="color:black" %)is the upgrade Image. There are different methods to upgrade, as below.
722 722  )))
... ... @@ -727,6 +727,7 @@
727 727  
728 728  [[image:1652429711145-862.png||height="270" width="737"]]
729 729  
765 +
730 730  Select the required image and click **Flash Image.** The image will be uploaded to the device, and then click **Process Update** to upgrade.
731 731  
732 732  (% style="color:red" %)**NOTE**: (% style="color:black" %)You normally need to **//uncheck//** the **Preserve Settings** checkbox when doing an upgrade to ensure that there is no conflict between the old settings and the new firmware. The new firmware will start up with its default settings.
... ... @@ -741,18 +741,22 @@
741 741  
742 742  (% style="color:#4f81bd" %)**//root@OpenWrt:~~# /sbin/sysupgrade –n /var/Your_Image//**
743 743  
780 +
744 744  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
745 745  
746 746  
747 -=== 5.5.9 System ~-~-> Reboot/Reset ===
748 748  
785 +=== 5.5.9  System ~-~-> Reboot/Reset ===
786 +
749 749  [[image:1652430197132-330.png||height="256" width="724"]]
750 750  
751 751  (((
752 752  
791 +
792 +
753 753  )))
754 754  
755 -=== 5.5.10 System ~-~-> Package Maintain ===
795 +=== 5.5.10  System ~-~-> Package Maintain ===
756 756  
757 757  [[image:1652430243826-126.png||height="289" width="723"]]
758 758  
... ... @@ -759,52 +759,45 @@
759 759  Place to show what package has installed and possible to upgrade packages.
760 760  
761 761  
762 -== 5.6 LogRead ==
763 763  
764 -=== 5.6.1 LogRead ~-~-> LoRa Log ===
803 +== 5.6  LogRead ==
765 765  
805 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
766 766  
767 767  Show the frequency for LoRa Radio and traffics.
768 768  
769 -[[image:image-20220615204306-1.png||height="575" width="733"]]
809 +[[image:1657069890320-513.png]]
770 770  
771 771  
772 -Show the IoT Server Connection State and FWD State
773 773  
774 -[[image:image-20220616083933-1.png||height="556" width="729"]]
775 775  
776 -DLOS8 can view GPS location in the Logread FWD State
814 +=== 5.6.2  LogRead ~-~-> System Log ===
777 777  
816 +Show the system log
778 778  
779 -Show the Error logs, RxTxJson lorawan packages, and PULL State
818 +[[image:1657069922599-794.png]]
780 780  
781 -[[image:image-20220615205416-6.png||height="442" width="884"]]
782 782  
783 783  
784 -=== 5.6.2 LogRead ~-~-> System Log ===
822 += 6.  More features =
785 785  
786 -Show the system log
824 +== 6.1  More instructions ==
787 787  
788 -[[image:1652430369760-511.png||height="373" width="730"]]
789 -
790 -= 6. More features =
791 -
792 -== 6.1 More instructions ==
793 -
794 794  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
795 795  
796 796  
797 -= 7. Linux System =
798 798  
799 -The DLOS8N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
830 += 7.  Linux System =
800 800  
832 +The LG308N is based on the OpenWrt Linux system. It is open source, and users are free to configure and modify the Linux settings.
801 801  
802 -== 7.1 SSH Access for Linux console ==
803 803  
804 -User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
835 +== 7.1  SSH Access for Linux console ==
805 805  
806 -IP address:  IP address of DLOS8N
837 +User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
807 807  
839 +IP address:  IP address of LG308N
840 +
808 808  Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
809 809  
810 810  User Name:      (% style="color:green" %)**root**
... ... @@ -811,19 +811,22 @@
811 811  
812 812  Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
813 813  
847 +
814 814  After logging in, you will be in the Linux console and can enter commands as shown below.
815 815  
816 816  [[image:1652431588565-830.png]]
817 817  
852 +
818 818  The “(% class="mark" %)**logread -f**(%%)” command can be used to debug how system runs.
819 819  
820 -[[image:1652431609193-637.png||height="214" width="732"]]
855 +[[image:1657070133275-283.png]]
821 821  
822 822  
823 -== 7.2 Edit and Transfer files ==
824 824  
859 +== 7.2  Edit and Transfer files ==
860 +
825 825  (((
826 -The DLOS8N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
862 +The LG308N supports the (% style="color:green" %)**SCP protocol** (% style="color:black" %)and has a built-in (% style="color:green" %)**SFTP server**. (% style="color:black" %)There are many ways to edit and transfer files using these protocols.
827 827  )))
828 828  
829 829  (((
... ... @@ -831,7 +831,7 @@
831 831  )))
832 832  
833 833  (((
834 -After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the DLOS8N, or edit the files directly in the windows.
870 +After establishing access via WinSCP to the device, you can use an FTP style window to drag / drop files to the LG308N, or edit the files directly in the windows.
835 835  )))
836 836  
837 837  (((
... ... @@ -841,25 +841,25 @@
841 841  [[image:1652431650755-450.png]]
842 842  
843 843  
844 -== 7.3 File System ==
880 +== 7.3  File System ==
845 845  
846 846  (((
847 -The DLOS8N has a 16MB flash and a 64MB RAM. The /var and /tmp directories are in the RAM, so contents stored in /tmp and /var will be erased after rebooting the device. Other directories are in the flash and will remain after reboot.
848 -)))
849 -
850 850  (((
851 -The Linux system uses around 8MB ~~10MB flash size which means there is not much room for user to store data in the DLOS8N flash.
884 +The LG308N has a 16MB flash and a 64MB RAM. The /var and /tmp directory are in the RAM, contents stored in /tmp and /var will be erased after reboot the device. Other directories are in the flash and will keep after reboot.
852 852  )))
853 853  
887 +
854 854  (((
855 -You can use an external USB flash memory device to extend the size of flash memory for storage.
889 +The Linux system use around 8MB ~~10MB flash size which means there is not much room for user to store data in the LG308N flash. User can use an external USB flash to extend the size for storage.
856 856  )))
891 +)))
857 857  
858 858  
859 -== 7.4 Package maintenance system ==
860 860  
861 -DLOS8N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
895 +== 7.4  Package maintenance system ==
862 862  
897 +LG308N uses the OpenWrt [[**OPKG package maintenance system**>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]. There are more than 3000+ packages available in our package server for users to install for their applications. For example, if you want to add the **//iperf //** tool, you can install the related packages and configure DLOS8N to use **//iperf //**.
898 +
863 863  (((
864 864  Below are some example **//opkg //** commands. For more information please refer to the [[OPKG package maintain system>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]]** **([[https:~~/~~/oldwiki.archive.openwrt.org/doc/techref/opkg>>https://oldwiki.archive.openwrt.org/doc/techref/opkg]])
865 865  )))
... ... @@ -909,15 +909,19 @@
909 909  
910 910  (((
911 911  (% style="background-color:#dcdcdc" %)//Configuring iperf.//
948 +
949 +
950 +
912 912  )))
913 913  
914 -= 8. Upgrade Linux Firmware =
953 += 8.  Upgrade Linux Firmware =
915 915  
916 916  
917 -= 9. FAQ =
918 918  
919 -== 9.1 How can I configure for a customized frequency band? ==
957 += 9.  FAQ =
920 920  
959 +== 9.1  How can I configure for a customized frequency band? ==
960 +
921 921  (((
922 922  See below link for how to customize frequency band: **[[How to customized LoRaWAN frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
923 923  )))
... ... @@ -926,15 +926,15 @@
926 926  
927 927  )))
928 928  
929 -== 9.2 Can I connect DLOS8N to LORIOT? ==
969 +== 9.2  Can I connect DLOS8N to LORIOT? ==
930 930  
931 931  Yes, the set up instruction is here: **[[Notes for LORIOT>>doc:Main.Notes for LORIOT.WebHome]]**
932 932  
933 933  
934 -== 9.3 Can I make my own firmware for the gateway, where can I find the source code? ==
974 +== 9.3  Can I make my own firmware for the gateway, where can I find the source code? ==
935 935  
936 936  (((
937 -Yes, You can make your own firmware for the DLOS8N for branding purposes or to add customized applications.
977 +Yes, You can make your own firmware for the LG308N for branding purposes or to add customized applications.
938 938  )))
939 939  
940 940  (((
... ... @@ -942,11 +942,37 @@
942 942  )))
943 943  
944 944  
945 -== 9.4 Can I use 868Mhz version for 915Mhz bands? ==
985 +== 9.4  Can I use 868Mhz version for 915Mhz bands? ==
946 946  
947 947  It is possible but the distance will be very short, you can select US915 frequency band in 868Mhz version hardware. It will work but you will see the performance is greatly decreased because the 868Mhz version has an RF filter for band 863~~870Mhz, all other frequencies will have high attenuation.
948 948  
949 949  
990 +== 9.5  Can I control the LEDs? ==
991 +
992 +Except the PWR LED is controlled by +3v3 power directly. All other LEDs can be controlled by developer.
993 +
994 +
995 +(% style="color:blue" %)**Control Globe LED:**
996 +
997 +ON: echo 1 > /sys/class/leds/dragino2\:red\:wlan/brightness 
998 +
999 +OFF: echo 0 > /sys/class/leds/dragino2\:red\:wlan/brightness
1000 +
1001 +
1002 +(% style="color:blue" %)**Control HEART LED:**
1003 +
1004 +First export the gpio27 and set to out
1005 +
1006 +echo 27 > /sys/class/gpio/export
1007 +
1008 +echo out > /sys/class/gpio/gpio27/direction
1009 +
1010 +ON: echo 0 > /sys/class/gpio/gpio27/value
1011 +
1012 +OFF: echo 1 > /sys/class/gpio/gpio27/value
1013 +
1014 +
1015 +
950 950  = 10. Trouble Shooting =
951 951  
952 952  == 10.1 I get kernel error when install new package, how to fix? ==
... ... @@ -972,8 +972,9 @@
972 972  (% style="background-color:yellow" %)Opkg install kmod-dragino2-si3217x_3.10.49+0.2-1_ar71xx.ipk –force-depends
973 973  
974 974  
975 -== 10.2 How to recover the DLOS8N if the firmware crashes ==
976 976  
1042 +== 10.2  How to recover the LG308N if the firmware crashes ==
1043 +
977 977  (((
978 978  Please follow this instruction to recover your gateway:  **[[Recover Gateway>>doc:Main.How to Recover Gateway if can't access it.WebHome]]**
979 979  )))
... ... @@ -982,12 +982,12 @@
982 982  
983 983  )))
984 984  
985 -== 10.3 I configured DLOS8N for WiFi access and lost its IP. What to do now? ==
1052 +== 10.3 I configured LG308N for WiFi access and lost its IP. What to do now? ==
986 986  
987 -[[image:1652435238615-272.png||height="247" width="727"]]
1054 +[[image:1657071488240-907.png]]
988 988  
989 989  (((
990 -The DLOS8N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access DLOS8N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
1057 +The LG308N has a fall-back IP address on its WAN port. This IP is always enabled so you can use the fall-back IP to access LG308N no matter what the WiFi IP is. The fall back IP is useful for connecting and debug the unit.
991 991  )))
992 992  
993 993  (% style="color:red" %)Note: fallback IP can be disabled in the WAN and DHCP page.
... ... @@ -995,37 +995,37 @@
995 995  
996 996  Steps to connect via fall back IP:
997 997  
998 -~1. Connect PC’s Ethernet port to DLOS8N’s WAN port
1065 +~1. Connect PC's Ethernet port to LG01's LAN port
999 999  
1000 -2. Configure PC’s Ethernet port has
1001 - IP: 172.31.255.253 and
1002 - Netmask: 255.255.255.252
1067 +2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
1003 1003  
1004 1004  As below photo:
1005 1005  
1006 1006  [[image:1652435256286-879.png]]
1007 1007  
1008 -3. In the PC, use IP address 172.31.255.254 to access the DLOS8N via Web or Console.
1073 +3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1009 1009  
1010 -Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
1011 1011  
1012 1012  
1013 1013  = 11. Order Info =
1014 1014  
1015 -(% style="color:#4f81bd" %) **//PART: DLOS8N-XXX-YYY//: **
1016 1016  
1017 -(% style="color:#4f81bd" %) **//XXX: Frequency Band//**
1080 +(% style="color:#4f81bd" %)**//PART: DLOS8N-XXX-YYY//: **
1018 1018  
1019 -* (% style="color:#4f81bd" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1020 -* (% style="color:#4f81bd" %)** 915**(% style="color:black" %): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1082 +(% style="color:#4f81bd" %)**//XXX: Frequency Band//**
1021 1021  
1022 -(% style="color:#4f81bd" %) **//YYY: 4G Cellular Option//**
1084 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1085 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1023 1023  
1024 -* (% style="color:#4f81bd" %)** E**(% style="color:black" %): EMEA, Korea, Thailand, India.
1025 -* (% style="color:#4f81bd" %)** A**(% style="color:black" %): North America/ Rogers/AT&T/T-Mobile.
1026 -* (% style="color:#4f81bd" %)** AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1027 -* (% style="color:#4f81bd" %)** J**(% style="color:black" %): Japan, DOCOMO/SoftBank/ KDDI
1087 +(% style="color:#4f81bd" %)
1028 1028  
1089 +(% style="color:#4f81bd" %)**//YYY: 4G Cellular Option//**
1090 +
1091 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1092 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1093 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1094 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1095 +
1029 1029  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1030 1030  
1031 1031  
... ... @@ -1032,14 +1032,19 @@
1032 1032  = 12. Packing Info =
1033 1033  
1034 1034  (((
1102 +
1103 +
1035 1035  **Package Includes**:
1036 -)))
1037 1037  
1038 -* DLOS8N LoRaWAN Gateway x 1
1039 -* Stick Antenna for LoRa RF part. Frequency is one of 470 or 868 or 915Mhz depends the model ordered
1106 +* LG308N or LG08 LoRa Gateway x 1
1107 +* Stick Antenna for LoRa RF part. Frequency is one of 433 or 868 or 915Mhz depends the model ordered
1108 +* Power Adapter: EU/AU/US type power adapter depends on country to be used
1040 1040  * Packaging with environmental protection paper box
1110 +)))
1041 1041  
1042 1042  (((
1113 +
1114 +
1043 1043  **Dimension and weight**:
1044 1044  )))
1045 1045  
... ... @@ -1049,6 +1049,7 @@
1049 1049  * Weight: 2.5kg
1050 1050  
1051 1051  
1124 +
1052 1052  = 13. Support =
1053 1053  
1054 1054  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657011152828-178.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.8 KB
Content
1657011208596-209.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +205.6 KB
Content
1657011715859-829.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.4 KB
Content
1657011966663-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
1657012061799-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.1 KB
Content
1657012559318-672.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +151.6 KB
Content
1657012573321-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657012821329-972.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657012860422-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +155.0 KB
Content
1657013108723-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657014479765-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1657014671459-433.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657014949846-507.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657069890320-513.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.2 KB
Content
1657069922599-794.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.2 KB
Content
1657070133275-283.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +221.0 KB
Content
1657071488240-907.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.0 KB
Content
image-20220705165446-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220705165446-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +4.1 KB
Content
image-20220705171041-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.7 KB
Content
image-20220705171836-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +157.9 KB
Content
image-20220705171919-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0