Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 95.1 >
edited by Xiaoling
on 2022/07/05 16:44
To version < 118.3 >
edited by Xiaoling
on 2022/07/05 18:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,13 +1,11 @@
1 1  (% style="text-align:center" %)
2 -[[image:1652409757234-446.png||height="399" width="399"]]
2 +[[image:1657010676286-732.png||height="452" width="452"]]
3 3  
4 4  
5 5  
6 6  
7 -
8 8  **Table of Contents：**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -19,38 +19,37 @@
19 19  
20 20  
21 21  
20 += 1.  Introduction =
22 22  
23 -= 1. Introduction =
22 +== 1.1  What is the LG308N ==
24 24  
25 -== 1.1 What is the DLOS8N ==
26 26  
27 -
28 28  (((
29 -The DLOS8N is an** (% style="color:#4f81bd" %)open source outdoor LoRaWAN Gateway(%%)**(% style="color:#4f81bd" %). (% style="color:black" %)It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
26 +(((
27 +The LG308N is an open source (% style="color:blue" %)**LoRaWAN Pico Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular network. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
30 30  )))
31 31  
32 32  (((
33 -DLOS8N supports (% style="color:#4f81bd" %)**Semtech packet forwarder** (% style="color:black" %)and (% style="color:#4f81bd" %)**LoRaWAN Station connection**, (% style="color:black" %)it is fully compatible with LoRaWAN protocol. DLOS8N includes a (% style="color:#4f81bd" %)**SX1302 LoRaWAN concentrator.**
31 +The LG308N uses (% style="color:blue" %)**Semtech packet forwarder** (%%)and fully compatible with LoRaWAN protocol. It includes a (% style="color:blue" %)**SX1302 LoRa concentrator**(%%), which provides 10 programmable parallel demodulation paths.
34 34  )))
35 35  
36 36  (((
37 -DLOS8N has (% style="color:#4f81bd" %)**pre-configured standard LoRaWAN frequency bands** (% style="color:black" %)to use for different countries.User can also customize the frequency bands to use in their own LoRaWAN network.
35 +LG308N has (% style="color:blue" %)**pre-configured standard LoRaWAN frequency bands**(%%) to use for different countries. User can also (% style="color:blue" %)**customized the frequency bands**(%%) to use in their own LoRa network.
38 38  )))
39 39  
40 40  (((
41 -DLOS8N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
39 +LG308N can communicate with ABP LoRaWAN end node without LoRaWAN server. System integrator can use it to integrate with their existing IoT Service without set up own LoRaWAN server or use 3rd party LoRaWAN service.
42 42  )))
41 +)))
43 43  
44 44  (((
45 -DLOS8N supports (% style="color:#4f81bd" %)**auto-provision** (% style="color:black" %) for mass deployment and long term maintain. System intergrator can easily change the settings.
46 -
47 47  
48 48  )))
49 49  
50 -[[image:1652411526195-923.png||height="494" width="731"]]
47 +[[image:1657010949218-224.png]]
51 51  
52 52  
53 -== 1.2 Specifications ==
50 +== 1.2  Specifications ==
54 54  
55 55  
56 56  **Hardware System:**
... ... @@ -63,21 +63,17 @@
63 63  * 64MB RAM
64 64  * 16MB Flash
65 65  
66 -
67 -
68 68  **Interface:**
69 69  
70 -* 10M/100M RJ45 Ports x 1
65 +* 10M/100M RJ45 Ports x 2
71 71  * WiFi : 802.11 b/g/n
72 72  * LoRaWAN Wireless
73 -* Power Input: 12 ~~ 24 V DC, 2 A
68 +* Power Input: 12 V DC, 2 A
74 74  * IEEE 802.3 af compliant PoE port (DC 37  ~~ 57 v)
75 75  * USB 2.0 host connector x 1
76 76  * Mini-PCI E connector x 1
77 77  * SX1302 + 2 x SX1250
78 78  
79 -
80 -
81 81  **WiFi Spec:**
82 82  
83 83  * IEEE 802.11 b/g/n
... ... @@ -91,11 +91,9 @@
91 91  ** 11g 54M : -71dbm
92 92  ** 11n 20M : -67dbm
93 93  
94 -
95 -
96 96  **LoRa Spec:**
97 97  
98 -* Up to -140 dBm sensitivity with SX1250 Tx/Rx front-end
89 +* Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
99 99  * 70 dB CW interferer rejection at 1 MHz offset
100 100  * Able to operate with negative SNR, CCR up to 9dB
101 101  * Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
... ... @@ -104,8 +104,6 @@
104 104  * Dynamic data-rate (DDR) adaptation
105 105  * True antenna diversity or simultaneous dual-band operation
106 106  
107 -
108 -
109 109  **Cellular 4G LTE (optional):**
110 110  
111 111  * Quectel: [[**EC25 LTE module**>>url:https://www.quectel.com/product/ec25minipcie.htm]]
... ... @@ -115,137 +115,117 @@
115 115  * Worldwide LTE,UMTS/HSPA+ and GSM/GPRS/EDGE coverage
116 116  * MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
117 117  
107 +== 1.3  Features ==
118 118  
119 119  
120 -**Power over Ethernet:**
121 -
122 -* IEEE 802.3af compliant.
123 -* Support wide input voltage range  37Vdc to 57Vdc.
124 -* Thermal cut off.
125 -* Short circuit protection.
126 -* Over current protection
127 -* Isolation level 4 KVrms.
128 -* Enhanced surge protection
129 -
130 -
131 -
132 -
133 -== 1.3 Features ==
134 -
135 -* Open Source Embedded Linux system
110 +* Open Source Linux system
136 136  * Managed by Web GUI, SSH via LAN or WiFi
137 -* Support Semtech UDP packet forwarder
138 -* Support LoRaWAN Station Connection
139 -* Cellular Failover conntection(option)
140 -* Direct Communication to LoRaWAN ABP Node
141 -* LoRaWAN packet filtering
142 -* Far seeing LED indicator
143 -* Built-in GPS module for location & timing
144 -* External fiber glass antenna
145 -* Auto-Provision
146 -* Remote Monitoring
147 -* 802.3af PoE
148 -* IP65
149 -* Lighting Protection
150 -* Power Consumption:12v ,300-500mA
112 +* Emulates 49x LoRa demodulators
113 +* LoRaWAN Gateway
114 +* 10 programmable parallel demodulation paths
151 151  
116 +== 1.4  Hardware System Structure ==
152 152  
118 +[[image:1657011152828-178.png]]
153 153  
154 154  
155 -== 1.4 Hardware System Structure ==
121 +== 1.5  LG308N Applications ==
156 156  
157 -[[image:1652411641871-482.png||height="416" width="716"]]
158 158  
124 +[[image:1657011208596-209.png]]
159 159  
160 -== 1.5 DLOS8N Applications ==
161 161  
162 -[[image:1652411671209-920.png||height="618" width="650"]]
127 +== 1.6  LED Indicators ==
163 163  
129 +LG308N has totally 6 LEDs, They are:
164 164  
165 -== 1.6 LED Indicators ==
131 +* **Power LED **[[image:image-20220705165446-1.png||height="21" width="22"]] : This (% style="color:red" %)**LED**(%%) will be **solid on** if the device is properly powered.
132 +* **HEART LED **[[image:image-20220705165446-2.png||height="19" width="18"]] : No function yet. 
133 +* **SYS LED** [[image:image-20220705165446-3.png||height="20" width="19"]] :  This** LED** will shows different colors on different state:
134 +** (% style="color:red" %)**SOLID**(%%):  Device is alive with LoRaWAN server connection.
135 +** (% style="color:red" %)**BLINKING**(%%)**:**  a) Device has internet connection but no LoRaWAN Connection.  or  b) Device is in booting stage, in this stage, it will (% style="color:red" %)**BLINKING**(%%)** **for several seconds.
136 +** (% style="color:red" %)**OFF**(%%):  Device doesn't have Internet connection.
166 166  
167 -[[image:1652411720670-489.png]]
138 +* **ETH LED**[[image:image-20220705165446-4.png||height="19" width="22"]] [[image:image-20220705165446-5.png||height="18" width="20"]] : These two LEDs show the ETH interfaces connection status.
139 +* **WiFi LED** [[image:image-20220705165446-6.png||height="19" width="19"]]** **:  This LED shows the WiFi interface connection status.
168 168  
141 +(% style="color:red" %)**Note: Above LED indication are for firmware version > LG02_LG08~-~-build-v5.3.1584002217-20200312-1639**
169 169  
170 -There is a waterproof triple color LED on DLOS8N enclosure, the meaning of the LED is:
171 171  
172 172  (((
173 173  (((
174 -* (((
175 -(% style="color:green" %)**SOLID GREEN**: (% style="color:black" %)DLOS8N is alive with LoRaWAN server connection.
176 -)))
177 -)))
178 -
179 -* (((
180 -(% style="color:green" %)**BLINKING GREEN**:(% style="color:black" %) a) Device has internet connection but no LoRaWAN Connection.  or b) Device is in booting stage, in this stage, it will (% style="color:green" %)**BLINKING GREEN**(% style="color:black" %) for several seconds and then (% style="color:red" %)**RED** (% style="color:black" %)and (% style="color:#ffc000" %)**YELLOW** (% style="color:black" %)will blink together.
181 -)))
182 -* (((
183 -(% style="color:red" %)**SOLID RED**: (% style="color:black" %)Device doesn’t have Internet connection.
184 -
185 -
186 -
187 187  
188 188  )))
189 189  )))
190 190  
191 -== 1.7 WiFi Direction ==
150 += 2.  Access and Configure LG308N =
192 192  
193 -DLOS8N use directional WiFi Antenna. The best direction is as below:
152 +The LG308N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
194 194  
195 -[[image:1652412859663-161.png||height="341" width="333"]]
196 196  
197 -= 2. Access and Configure DLOS8N =
155 +== 2.1  Find IP address of LG308N ==
198 198  
199 -The DLOS8N is configured as a WiFi Access Point by default. User can access and configure the DLOS8N after connecting to its WiFi network, or via its Ethernet port.
157 +=== 2.1.1  Connect via WiFi ===
200 200  
159 +[[image:1657011715859-829.png]]
201 201  
202 -== 2.1 Find IP address of DLOS8N ==
203 203  
204 -=== 2.1.1 Connect via WiFi ===
162 +At the first boot of LG308N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(%%)with password:
205 205  
206 -[[image:1652412985720-934.png]]
164 +(% style="color:red" %)Note: In latest version firmware, it has been password protected and the password is: dragino+dragino
207 207  
208 -At the first boot of DLOS8N, it will auto generate a WiFi network called (% style="color:green" %)**//dragino-xxxxxx //**(% style="color:black" %)with password:
209 -
210 210  [[image:1652413127647-377.png]]
211 211  
212 -(% style="background-color:#ffffcc" %)dragino+dragino
213 213  
214 214  (((
215 -User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the DLOS8N has the default IP (% style="color:green" %)10.130.1.1
170 +User can use a PC to connect to this WiFi network. The PC will get an IP address 10.130.1.xxx and the LG308N has the default IP (% style="color:green" %)10.130.1.1
216 216  
217 217  
218 218  )))
219 219  
220 -=== 2.1.2 Connect via Ethernet with DHCP IP from router ===
175 +=== 2.1.2  Connect via WAN port with DHCP IP from router ===
221 221  
222 -[[image:1652414114583-532.png]]
177 +[[image:1657011966663-484.png]]
223 223  
224 -
225 225  (((
226 -Alternatively, connect the DLOS8N Ethernet port to your router and DLOS8N will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the DLOS8N. You can also use this IP to connect.
180 +Alternatively, connect the LG308N** __WAN port__** to your router and LG308N will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG308N. You can also use this IP to connect.
181 +)))
227 227  
183 +
184 +(((
228 228  
229 229  )))
230 230  
231 -=== 2.1.3 Connect via WiFi with DHCP IP from router ===
188 +=== 2.1.3  Connect via LAN port with direct connection from PC ===
232 232  
233 -[[image:1652414137639-956.png]]
190 +[[image:1657012061799-674.png]]
234 234  
192 +(((
193 +The LG308N __**LAN port**__ is configured as DHCP router by default, user can connect the PC to LAN port and set PC to DHCP mode, it will get IP from LAN port and be able to access to the device. The default IP in LAN port is 10.130.1.1
194 +)))
235 235  
236 -If the DLOS8N already connect to the router via WiFi, use can use the WiFi IP to connect to DLOS8N.
237 237  
238 238  
239 -=== 2.1.4 Connect via Ethernet with fall back ip ===
198 +=== 2.1.4  Connect WiFi with DHCP IP from router ===
240 240  
241 -The WAN port also has a [[fall back ip address>>path:#_I_configured_LPS8]] for access if user doesn’t connect to uplink router. Click [[here>>path:#_I_configured_LPS8]] to see how to configure.
200 +[[image:image-20220705171041-7.png]]
242 242  
243 243  
244 -== 2.2 Access Configure Web UI ==
203 +If the LG308N already connect to the router via WiFi, use can use the WiFi IP to connect to LG308N.
245 245  
205 +
206 +
207 +=== 2.1.5  Connect via LAN port by fall back ip ===
208 +
209 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
210 +
211 +
212 +
213 +== 2.2  Access Configure Web UI ==
214 +
246 246  **Web Interface**
247 247  
248 -Open a browser on the PC and type the DLOS8N ip address (depends on your connect method)
217 +Open a browser on the PC and type the LG308N ip address (depends on your connect method)
249 249  
250 250  [[http:~~/~~/10.130.1.1/>>url:http://10.130.1.1/]] (Access via WiFi AP network)
251 251  
... ... @@ -264,12 +264,16 @@
264 264  
265 265  [[image:1652414287022-223.png]]
266 266  
267 -= 3. Typical Network Setup =
268 268  
269 -== 3.1 Overview ==
237 += 3.  Typical Network Setup =
270 270  
271 -The DLOS8N supports flexible network set up for different environments. This section describes the typical network topology. The network set up includes:
239 +== 3.1  Overview ==
272 272  
241 +(((
242 +LG308N supports flexible network set up for different environment. This section describes the typical network topology can be set in LG308N. The typical network set up includes:
243 +)))
244 +
245 +
273 273  * **WAN Port Internet Mode**
274 274  * **WiFi Client Mode**
275 275  * **WiFi AP Mode**
... ... @@ -276,24 +276,22 @@
276 276  * **Cellular Mode**
277 277  
278 278  
252 +== 3.2  Use WAN port to access Internet ==
279 279  
280 -
281 -== 3.2 Use WAN port to access Internet ==
282 -
283 283  By default, the DLOS8N is set to use the WAN port to connect to an upstream network. When you connect the DLOS8N’s WAN port to an upstream router, DLOS8N will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:#4f81bd" %)**home page**:
284 284  
285 -[[image:1652420169255-959.png]]
256 +[[image:1657012559318-672.png]]
286 286  
287 287  
288 288  == 3.3 Access the Internet as a WiFi Client ==
289 289  
290 -In the WiFi Client Mode, DLOS8N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
261 +In the WiFi Client Mode, LG308N acts as a WiFi client and gets DHCP from an upstream router via WiFi.
291 291  
292 292  (((
293 293  The settings for WiFi Client is under page (% style="color:#4f81bd" %)**System~-~-> WiFi ~-~-> WiFi WAN Client Settings**
294 294  )))
295 295  
296 -[[image:1652420327792-211.png]]
267 +[[image:1657012573321-862.png]]
297 297  
298 298  (((
299 299  In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click Save & Apply to connect.
... ... @@ -301,19 +301,21 @@
301 301  
302 302  )))
303 303  
304 -== 3.4 Access the Internet via Cellular ==
275 +== 3.4  Use built-in 4G modem for internet access ==
305 305  
306 -If the DLOS8N support 3G/4G Cellular modem option, When the label on the shell is displayed as Model : DLOS8N-EC25, it indicates that DLOS8 already has EC25 3G/4G modules,user can use it as main internet connection or back up.
277 +If the LG308N has 3G/4G Cellular modem, user can use it as main internet connection or back up.
307 307  
308 -(((
309 -First, release the four screws of DLOS8N, pull out PCB and install SIM card as below:
310 -)))
311 311  
312 -[[image:1652420606018-181.png]]
280 +First, install the Micro SIM card as below direction
313 313  
282 +Second, Power off/ ON LG308N to let it detect the SIM card.
314 314  
284 +[[image:image-20220705171836-8.png]]
285 +
286 +
287 +
315 315  (((
316 -[[image:1652420718132-929.png||height="427" width="727"]]
289 +
317 317  )))
318 318  
319 319  (((
... ... @@ -322,53 +322,55 @@
322 322  
323 323  (((
324 324  While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
298 +
299 +
325 325  )))
326 326  
327 327  (((
328 -[[image:1652421032117-341.png||height="329" width="752"]]
303 +[[image:image-20220705171919-9.png]]
329 329  )))
330 330  
331 -(% style="color:red" %)**Note** *: For DLOS8N which doesn’t have the cellular module, this page will shows Cellular not detected.
332 332  
307 +== 3.5  Check Internet connection ==
333 333  
334 -== 3.5 Check Internet connection ==
335 -
336 336  In the (% style="color:#4f81bd" %)**home**(%%) page, we can check the Internet connection.
337 337  
338 338  * GREEN Tick ​​​​ [[image:1652436675869-206.png||height="14" width="15"]] : This interface has Internet connection.
339 -* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don’t use it for internet connection.
340 -* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn’t connected.
312 +* Yellow  Tick  [[image:1652436705761-420.png||height="15" width="15"]] : This interface has IP address but don't use it for internet connection.
313 +* RED Cross    [[image:1652436787176-950.png||height="14" width="15"]] : This interface doesn't connected.
341 341  
342 -[[image:1652421351382-793.png||height="339" width="765"]]
315 +[[image:1657012821329-972.png]]
343 343  
344 344  
345 -= 4. Example: Configure as a LoRaWAN gateway =
318 += 4.  Example: Configure as a LoRaWAN gateway =
346 346  
347 -DLOS8N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
320 +LG308N is fully compatible with LoRaWAN protocol. It uses the legacy Semtech Packet forwarder to forward the LoRaWAN packets to server. The structure is as below.
348 348  
349 349  (((
350 -[[image:image-20220513140429-1.png||height="565" width="824"]]
323 +[[image:1657012860422-990.png]]
351 351  )))
352 352  
353 -This chapter describes how to use the DLOS8Nto work with
326 +This chapter describes how to use the LG308N to work with(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
354 354  
355 -TheThingsNetwork v3(TTN v3)[[ LoRaWAN Server>>url:https://www.thethingsnetwork.org/]]  ([[www.thethingsnetwork.org>>url:http://www.thethingsnetwork.org/]])
356 356  
329 +== 4.1  Create a gateway in TTN V3 Server ==
357 357  
358 -== 4.1 Create a gateway in TTN V3 Server ==
359 359  
360 360  (% style="color:#4f81bd" %)**Step 1: Get a Unique gateway ID.**
361 361  
362 362  (((
363 -Every DLOS8N has a unique gateway id. The ID can be found at LoRaWAN page:
335 +Every LG308N has a unique gateway id. The ID can be found at LoRaWAN page:
364 364  )))
365 365  
366 366  (((
367 -[[image:1652421929753-168.png||height="403" width="739"]]
339 +[[image:1657013108723-531.png]]
340 +
341 +
368 368  )))
369 369  
370 -The example gateway id is: **a840411e96744154**
344 +The example gateway id is: (% style="color:green" %)**a840411e96744154**
371 371  
346 +
372 372  (% style="color:#4f81bd" %)**Step 2: Sign up a user account in TTN server**
373 373  
374 374  [[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
... ... @@ -375,6 +375,7 @@
375 375  
376 376  [[image:1652422127479-258.png||height="346" width="738"]]
377 377  
353 +
378 378  (% style="color:#4f81bd" %)**Step 3: Choose the TTNv3 Cluster Picker**
379 379  
380 380  (((
... ... @@ -383,11 +383,12 @@
383 383  
384 384  (% style="color:red" %)**Note: Choose the cluster corresponds to a specific Gateway server address**
385 385  
386 -* Europe 1 (% style="color:red" %)corresponding Gateway server address: (% style="color:black" %)eu1.cloud.thethings.network
387 -* North America 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)nam1.cloud.thethings.network
388 -* Australia 1 (% style="color:red" %)corresponding Gateway server address:** **(% style="color:black" %)au1.cloud.thethings.network
389 -* Legacy V2 Console : (% style="color:red" %)TTN v2 shuts down in December 2021
362 +* Europe 1 (% style="color:red" %)**corresponding Gateway server address:** (% style="color:black" %)eu1.cloud.thethings.network
363 +* North America 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)nam1.cloud.thethings.network
364 +* Australia 1 (% style="color:red" %)**corresponding Gateway server address: **(% style="color:black" %)au1.cloud.thethings.network
365 +* Legacy V2 Console : (% style="color:red" %)**TTN v2 shuts down in December 2021**
390 390  
367 +
391 391  (% style="color:#4f81bd" %)**Step 4: Create a Gateway**
392 392  
393 393  [[image:1652422440891-514.png||height="360" width="747"]]
... ... @@ -398,8 +398,10 @@
398 398  
399 399   [[image:1652422470352-518.png||height="391" width="716"]]
400 400  
378 +
401 401  [[image:1652422479876-297.png||height="398" width="729"]]
402 402  
381 +
403 403  (((
404 404  (% style="color:red" %)**Notice: **Gateway Server address must match the gateway configuration, otherwise you will have problem for End Node to join the network.
405 405  )))
... ... @@ -409,14 +409,14 @@
409 409  [[image:1652422509034-682.png||height="299" width="739"]]
410 410  
411 411  
412 -== 4.2 Configure DLOS8N to connect to TTN v3 ==
391 +== 4.2  Configure DLOS8N to connect to TTN v3 ==
413 413  
414 414  (((
415 -You can now configure the DLOS8N to let it connect to TTN network V3.
394 +You can now configure the LG308N to let it connect to TTN network V3.
416 416  )))
417 417  
418 418  (((
419 -Make sure your DLOS8N has a working Internet Connection first.
398 +Make sure your LG308N has a working Internet Connection first.
420 420  )))
421 421  
422 422  (((
... ... @@ -427,19 +427,22 @@
427 427  
428 428  (% style="color:red" %)**Note: **The server address must match the Gateway server address you choose in TTN V3.
429 429  
409 +
430 430  In the home page, we can see the LoRaWAN connection is ready now.
431 431  
432 -[[image:1652422685063-596.png||height="327" width="729"]]
412 +[[image:1657014479765-850.png]]
433 433  
414 +
434 434  In TTN v3 portal, we can also see the gateway is connected.
435 435  
436 436  [[image:1652422703020-955.png||height="343" width="730"]]
437 437  
438 438  
439 -== 4.3 Configure frequency ==
420 +== 4.3  Configure frequency ==
440 440  
441 -We also need to set the frequency plan in DLOS8N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
422 +We also need to set the frequency plan in LG308N to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
442 442  
424 +
443 443  [[image:1652422737399-529.png||height="362" width="737"]]
444 444  
445 445  
... ... @@ -448,7 +448,7 @@
448 448   [[image:1652422763536-750.png||height="514" width="730"]]
449 449  
450 450  
451 -== 4.4 Add a LoRaWAN End Device ==
433 +== 4.4  Add a LoRaWAN End Device ==
452 452  
453 453  (((
454 454  This section shows how to add a LoRaWAN End device to a LoRaWAN network and see the data from TTN web site.
... ... @@ -473,13 +473,18 @@
473 473  * APP Key - Unique key to secure communications with a particular device.
474 474  
475 475  (((
458 +
459 +
476 476  A set of these codes are stored in each device by the manufacturer as the default codes for that particular device. Each device is shipped with a sticker with the default Device EUI as shown below.
477 477  )))
478 478  
479 479  [[image:1652422840936-838.png]]
480 480  
465 +
481 481  (((
482 482  (% style="color:red" %)Note: You may be able to change these codes in a device by using a configuration facility on the device e.g. the LT-22222 uses a serial port access and a series of AT commands.  Changing the codes may be necessary in the case where you have to use codes assigned by a LoRa WAN server.
468 +
469 +
483 483  )))
484 484  
485 485  (((
... ... @@ -490,10 +490,12 @@
490 490  Select **Add Application** to open the screen below.
491 491  )))
492 492  
493 -[[image:1652422946999-255.png||height="356" width="744"]]
480 +[[image:1657014671459-433.png]]
494 494  
482 +
495 495  Open the **Application **select** Add end device**
496 496  
485 +
497 497  Start Register the end device
498 498  
499 499  [[image:1652422975885-591.png||height="359" width="726"]]
... ... @@ -500,6 +500,8 @@
500 500  
501 501  (((
502 502  Select OTAA activation mode
492 +
493 +
503 503  )))
504 504  
505 505  (((
... ... @@ -510,14 +510,18 @@
510 510  
511 511  First, input the End device ID, AppEUI and DevEUI.
512 512  
504 +
513 513  [[image:1652423022781-339.png||height="365" width="741"]]
514 514  
515 515  Secondly, choose the corresponding frequency and LoRaWAN class capabilities.
516 516  
509 +
517 517  [[image:1652423046741-467.png||height="355" width="736"]]
518 518  
519 519  (((
520 520  Finally, Application layer settings input the corresponding AppKey. Before saving the configuration, check that the data matches the device.
514 +
515 +
521 521  )))
522 522  
523 523  (((
... ... @@ -531,18 +531,18 @@
531 531  [[image:1652423277549-324.png||height="273" width="745"]]
532 532  
533 533  
534 -= 5. Web Configure Pages =
529 += 5.  Web Configure Pages =
535 535  
536 -== 5.1 Home ==
531 +== 5.1  Home ==
537 537  
538 538  Shows the system running status.
539 539  
540 -[[image:1652423418568-752.png||height="329" width="724"]]
535 +[[image:1657014949846-507.png]]
541 541  
542 542  
543 -== 5.2 LoRa Settings ==
538 +== 5.2  LoRa Settings ==
544 544  
545 -=== 5.2.1 LoRa ~-~-> LoRa ===
540 +=== 5.2.1  LoRa ~-~-> LoRa ===
546 546  
547 547  (((
548 548  This page shows the LoRa Radio Settings. There are a set of default frequency band according to LoRaWAN protocol, and user can customized the band* as well.
... ... @@ -549,11 +549,11 @@
549 549  )))
550 550  
551 551  (((
552 -Different DLOS8N hardware version can support different frequency range:
547 +Different LG308N hardware version can support different frequency range:
553 553  )))
554 554  
555 -* **868**: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
556 -* **915**: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
550 +* (% style="color:blue" %)**868**(%%): valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
551 +* (% style="color:blue" %)**915**(%%): valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
557 557  
558 558  (((
559 559  After user choose the frequency plan, he can see the actually frequency in used by checking the page **LogRead ~-~-> LoRa Log**
... ... @@ -564,9 +564,9 @@
564 564  Note *: **[[See this instruction for how to customize frequency band>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]**
565 565  
566 566  
567 -=== 5.2.2 LoRa ~-~-> ABP Decryption ===
562 +=== 5.2.2  LoRa ~-~-> ABP Decryption ===
568 568  
569 -The DLOS8N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
564 +The LG308N can communicate with LoRaWAN ABP End Node without the need of LoRaWAN server. It can be used in some cases such as:
570 570  
571 571  * No internet connection.
572 572  * User wants to get data forward in gateway and forward to their server based on MQTT/HTTP, etc. (Combine ABP communication method and [[MQTT forward together>>doc:Main.MQTT Forward Instruction.WebHome]]).
... ... @@ -1068,9 +1068,6 @@
1068 1068  * Package Size: 49 x 19.5 x x 19Package Size: 4912 cm
1069 1069  * Weight: 2.5kg
1070 1070  
1071 -
1072 -
1073 -
1074 1074  = 13. Support =
1075 1075  
1076 1076  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1657010949218-224.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +163.2 KB
Content
1657011152828-178.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +86.8 KB
Content
1657011208596-209.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +205.6 KB
Content
1657011715859-829.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.4 KB
Content
1657011966663-484.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.7 KB
Content
1657012061799-674.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.1 KB
Content
1657012559318-672.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +151.6 KB
Content
1657012573321-862.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +85.0 KB
Content
1657012821329-972.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
1657012860422-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +155.0 KB
Content
1657013108723-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.2 KB
Content
1657014479765-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.5 KB
Content
1657014671459-433.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.2 KB
Content
1657014949846-507.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +169.0 KB
Content
image-20220705165446-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
image-20220705165446-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220705165446-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20220705165446-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +4.1 KB
Content
image-20220705171041-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.7 KB
Content
image-20220705171836-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +157.9 KB
Content
image-20220705171919-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0