Last modified by Kilight Cao on 2025/02/07 08:57
<
From version < 151.1 >
edited by Kilight Cao
on 2024/05/18 17:09
To version < 142.1 >
edited by Kilight Cao
on 2023/04/26 15:56
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LG308N -- LoRaWAN Gateway User Manual
1 +LG308N - LoRaWAN Gateway User Manual
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  
6 6  
7 -**Table of Contents:**
7 +**Table of Contents：**
8 8  
9 9  {{toc/}}
10 10  
... ... @@ -15,9 +15,13 @@
15 15  
16 16  
17 17  
18 +
19 +
20 +
21 +
18 18  = 1.  Introduction =
19 19  
20 -== (% data-sider-select-id="b56f45fb-88b0-4b64-98a2-012c4c56800e" %)1.1  What is the LG308N(%%) ==
24 +== 1.1  What is the LG308N ==
21 21  
22 22  
23 23  (((
... ... @@ -87,7 +87,7 @@
87 87  * Up to -142.5 dBm sensitivity with SX1250 Tx/Rx front-end
88 88  * 70 dB CW interferer rejection at 1 MHz offset
89 89  * Able to operate with negative SNR, CCR up to 9dB
90 -* 8 x 8 channels LoRa packet detectors,8 x SF5-SF12 LoRa demodulators,8 x SF5-SF10 LoRa demodulators,125/250/500 kHz LoRa demodulator and 1 x (G)FSK demodulator
94 +* Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator
91 91  * Dual digital TX & RX radio front-end interfaces
92 92  * 10 programmable parallel demodulation paths
93 93  * Dynamic data-rate (DDR) adaptation
... ... @@ -223,7 +223,7 @@
223 223  === 2.1.5  Connect via LAN port by fall back ip ===
224 224  
225 225  
226 -The **LAN port** also has a [[fall back ip address>>||anchor="H11.3A0IconfiguredLG308NforWiFiaccessandlostitsIP.Whattodonow3F"]] for access if user doesn't connect to uplink router.
230 +The **LAN port** also has a [[fall back ip address>>path:#fallback_ip]] for access if user doesn't connect to uplink router.
227 227  
228 228  
229 229  == 2.2  Access Configure Web UI ==
... ... @@ -377,7 +377,7 @@
377 377  (% style="color:blue" %)**Step 2: Sign up a user account in TTN server**
378 378  
379 379  
380 -[[**https:~~/~~/account.thethingsnetwork.org/register**>>https://id.thethingsnetwork.org/]]
384 +[[**https:~~/~~/account.thethingsnetwork.org/register**>>url:https://account.thethingsnetwork.org/register]]
381 381  
382 382  
383 383  [[image:1652422127479-258.png||height="346" width="738"]]
... ... @@ -428,6 +428,7 @@
428 428  
429 429  [[image:1652422509034-682.png||height="299" width="739"]]
430 430  
435 +
431 431  == 4.2  Configure LG308N to connect to TTN v3 ==
432 432  
433 433  
... ... @@ -511,7 +511,7 @@
511 511  
512 512  )))
513 513  
514 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20230426083319-1.png?width=556&height=258&rev=1.1||alt="image-20230426083319-1.png"]]
519 +[[image:1652422840936-838.png]]
515 515  
516 516  
517 517  (((
... ... @@ -639,7 +639,7 @@
639 639  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916114346-7.png?rev=1.1||alt="image-20220916114346-7.png" height="359" width="876"]]
640 640  
641 641  
642 -== (% data-sider-select-id="82a87698-9674-4d38-bd25-98bcb08551b2" %)5.3  LoRaWAN Settings(%%) ==
647 +== 5.3  LoRaWAN Settings ==
643 643  
644 644  === 5.3.1  LoRaWAN ~-~-> LoRaWAN ===
645 645  
... ... @@ -714,117 +714,93 @@
714 714  [[image:1652428705046-212.png||height="417" width="733"]]
715 715  
716 716  
717 -== 5.5  Network ==
722 +== 5.5  System ==
718 718  
719 -=== 5.5.1  Network ~-~-> Network Status ===
724 +=== 5.5.1  System ~-~-> System Overview ===
720 720  
721 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143226-2.png?width=950&height=742&rev=1.1||alt="image-20240419143226-2.png"]]
722 722  
727 +Shows the system info:
723 723  
724 -=== 5.5.2  Network ~-~-> Network ===
725 725  
730 +[[image:image-20220916173046-3.png||height="613" width="868"]]
726 726  
727 -(% data-sider-select-id="cddf8b4f-5a22-42d2-bdd8-8ee8180a1f07" %)
728 -**__LAN Settings:    __**When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
729 729  
730 -(% data-sider-select-id="b4859c0c-d733-4fa4-bbc8-509d985342cc" %)
731 -__**WAN Settings:  **__Setting for LG308N WAN port
733 +=== 5.5.2  System ~-~-> General ( login settings) ===
732 732  
733 -(% data-sider-select-id="a653ed2d-c570-4cfa-9689-27fea7b5f581" %)
734 -__**WiFi Settings:  **__** **Setting for LG308N WiFi IP when use it as WiFi Client
735 735  
736 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143347-3.png?rev=1.1||alt="image-20240419143347-3.png"]]
736 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134411-11.png?rev=1.1||alt="image-20220916134411-11.png" height="499" width="865"]](% style="display:none" %)
737 737  
738 738  
739 -=== 5.5.3  Network ~-~-> WiFi ===
739 +(((
740 +(% style="color:#037691" %)**__System Password:__**
741 +)))
740 740  
743 +(((
744 +There are two login for DLOS8: (% style="color:#4f81bd" %)**root /dragino** (% style="color:black" %)or (% style="color:#4f81bd" %)**admin /dragino**. (% style="color:black" %)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
745 +)))
741 741  
742 -(% data-sider-select-id="005f89b3-ae2e-410c-b2ac-db80867d5660" %)
743 -LG308N WiFi Settings.
747 +(((
748 +This page can be used to set the password for them.
749 +)))
744 744  
745 -(% data-sider-select-id="005f89b3-ae2e-410c-b2ac-db80867d5660" %)
746 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419143504-4.png?width=946&height=500&rev=1.1||alt="image-20240419143504-4.png"]]
751 +(((
752 +(% style="color:#037691" %)**__Timezone: __**(%%)Set device timezone.
753 +)))
747 747  
755 +(((
756 +(% style="color:#037691" %)**__Port forwarding: __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
748 748  
749 -=== 5.5.4  Network ~-~-> Cellular ===
758 +
759 +)))
750 750  
751 -While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
761 +=== 5.5.3  System ~-~-> Network ===
752 752  
753 -(% data-sider-select-id="005f89b3-ae2e-410c-b2ac-db80867d5660" %)
754 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657155507672-204.png?rev=1.1||alt="1657155507672-204.png"]]
755 755  
756 -(% data-sider-select-id="005f89b3-ae2e-410c-b2ac-db80867d5660" %)
757 -(% data-sider-select-id="262b1aeb-7601-4231-ba98-63f35bcd6775" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
764 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134642-12.png?rev=1.1||alt="image-20220916134642-12.png" height="411" width="873"]]
758 758  
759 759  
760 -
761 -== (% data-sider-select-id="c723b2da-a166-48cd-ab9e-3632fd95e945" %)5.6  System(%%) ==
762 -
763 -=== (% data-sider-select-id="573ebcc8-61e5-4f99-8729-b580f3f3fe27" %)5.6.1  System ~-~-> System Overview(%%) ===
764 -
765 -
766 -Shows the system info:
767 -
768 -
769 -[[image:image-20220916173046-3.png||height="613" width="868"]]
770 -
771 -
772 -(% data-sider-select-id="a7ee9375-c1cf-4a6c-a61d-38426e50d84a" %)
773 -=== 5.6.2  System ~-~-> General ( login settings) ===
774 -
775 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419144019-5.png?rev=1.1||alt="image-20240419144019-5.png" height="813" width="863"]]
776 -
777 777  (((
778 -
779 -
780 -(% data-sider-select-id="00e0325f-1698-4166-b578-eba5340e7e8e" style="color:#037691" %)**__System Password:__**
768 +(% style="color:#037691" %)**__LAN Settings:  __**(%%)When the LG308N has the AP enable, LAN settings specify the network info for LG308N's own network.
781 781  )))
782 782  
783 783  (((
784 -(% data-sider-select-id="95b842a8-0924-40db-acb5-4bc0aa4da2ea" %)
785 -There are two login for LG308N: (% style="color:blue" %)**root /dragino** (%%)or (% style="color:blue" %)**admin /dragino**. (%%)Both root and admin has the same right for WEB access. But root user has also the right to access via SSH to Linux system. admin only able to access WEB interface.
772 +(% style="color:#037691" %)__**WAN Settings: **__(%%)Setting for LG308N WAN port
786 786  )))
787 787  
788 788  (((
789 -This page can be used to set the password for them.
776 +(% style="color:#037691" %)__**WiFi Settings:  **__(%%)Setting for LG308N WiFi IP when use it as WiFi Client
790 790  )))
791 791  
792 -(((
793 -(% style="color:#037691" %)**__Timezone:  __**(%%)Set device timezone.
794 -)))
795 795  
796 -(((
797 -(% data-sider-select-id="be6bdce7-110b-4367-bcd5-d176d288153e" %)
798 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Port forwarding:  __**(%%)Enable/Disable the HTTP and SSH access via WAN interface.
780 +=== 5.5.4  System ~-~-> WiFi ===
799 799  
800 -(% data-sider-select-id="0e3c0e0e-5796-4a1a-b3da-cdfc059c383d" %)
801 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Fallback Settings:  __**(%%)Enable/Disable the Fallback interface.
802 802  
803 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Keepalive_Script:  __**(%%)Set the keepalive_scrpt interval.
783 +LG308N WiFi Settings.
804 804  
805 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Logread Level:  __**(%%)Change the logread level.
785 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916134831-13.png?rev=1.1||alt="image-20220916134831-13.png" height="408" width="870"]]
806 806  
807 -(% data-sider-select-id="2140bc4a-c71f-4387-845a-510c0b050940" %)
808 -(% data-sider-select-id="31384c06-f8bc-420e-ba58-0a2d5916e600" style="color:#037691" %)**__Eable Internet Detect and Recover:  __**(%%)Enable/Disable the Internet Detect interface,Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
809 809  
788 +=== 5.5.5  System ~-~-> Cellular ===
810 810  
811 -=== 5.6.3  System ~-~-> Backup/Restore Config ===
812 812  
813 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145717-7.png?width=890&height=240&rev=1.1||alt="image-20240419145717-7.png"]]
791 +While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
814 814  
815 815  
816 -=== 5.6.4  System ~-~-> Remote.it ===
794 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135100-14.png?rev=1.1||alt="image-20220916135100-14.png" height="347" width="874"]](% style="display:none" %)
817 817  
818 -In the **System-> Remoteit** interface, users can configure the gateway to be accessed remotely via Remote.it.
819 819  
820 -the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
797 +(% style="color:red" %)**Note *: For LG308N which doesn't have the cellular module, this page will shows Cellular not detected.**
821 821  
822 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419150201-8.png?width=882&height=535&rev=1.1||alt="image-20240419150201-8.png"]]
823 823  
800 +=== 5.5.6  System ~-~-> Network Status ===
824 824  
825 -=== (% data-sider-select-id="bf7cc535-bf5b-48cc-ade1-8cd02793cc24" %)5.6.5  System ~-~-> Remote Mgnt & Auto Provision(%%) ===
826 826  
803 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916135207-15.png?rev=1.1||alt="image-20220916135207-15.png" height="599" width="882"]]
827 827  
805 +
806 +=== 5.5.7  System ~-~-> Remote Mgnt & Auto Provision ===
807 +
808 +
828 828  Auto Provision is the feature for batch configure and remote management. It can be used in below two cases:
829 829  
830 830  [[image:1652429518191-846.png||height="332" width="733"]]
... ... @@ -845,7 +845,7 @@
845 845  
846 846  (% style="display:none" %) (%%)
847 847  
848 -=== (% data-sider-select-id="933284ec-43aa-4f3a-866d-3652cf9d6d99" %)5.6.6  System ~-~-> Firmware Upgrade(%%) ===
829 +=== 5.5.8  System ~-~-> Firmware Upgrade ===
849 849  
850 850  
851 851  We keep improving the DLOS8N Linux side firmware for new features and bug fixes. Below are the links for reference.
... ... @@ -904,7 +904,7 @@
904 904  (% style="color:red" %)**NOTE**(%%) : it is important to transfer the image in the /var directory, otherwise it may exceed the available flash size.
905 905  
906 906  
907 -=== (% data-sider-select-id="f1b2982b-d798-497e-9a52-aa589063cac4" %)5.6.7  System ~-~-> Reboot/Reset(%%) ===
888 +=== 5.5.9  System ~-~-> Reboot/Reset ===
908 908  
909 909  
910 910  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140312-18.png?rev=1.1||alt="image-20220916140312-18.png" height="274" width="873"]]
... ... @@ -913,7 +913,7 @@
913 913  
914 914  )))
915 915  
916 -=== (% data-sider-select-id="0a08d67d-8e7f-41da-9bff-1355300ae3d7" %)5.6.8  System ~-~-> Package Maintain(%%) ===
897 +=== 5.5.10  System ~-~-> Package Maintain ===
917 917  
918 918  
919 919  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140421-19.png?rev=1.1||alt="image-20220916140421-19.png" height="687" width="868"]]
... ... @@ -922,9 +922,9 @@
922 922  Place to show what package has installed and possible to upgrade packages.
923 923  
924 924  
925 -== (% data-sider-select-id="038c76a1-26b1-41cb-9ab2-19e7644f5554" %)5.7  LogRead(%%) ==
906 +== 5.6  LogRead ==
926 926  
927 -=== (% data-sider-select-id="b4919c93-5eca-4b73-862c-9ea062f2196d" %)5.7.1 LogRead ~-~-> LoRa Log(%%) ===
908 +=== 5.6.1  LogRead ~-~-> LoRa Log ===
928 928  
929 929  
930 930  Show the frequency for LoRa Radio and traffics.
... ... @@ -933,16 +933,9 @@
933 933  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140549-20.png?rev=1.1||alt="image-20220916140549-20.png" height="734" width="883"]]
934 934  
935 935  
936 -=== (% data-sider-select-id="63e3559f-44af-4948-9e1e-d1d43817d95b" %)5.7.2 LogRead ~-~-> Gateway Traffic(%%) ===
917 +=== 5.6.2  LogRead ~-~-> System Log ===
937 937  
938 -Show the gateway traffic:
939 939  
940 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112159-1.png?width=872&height=610&rev=1.1||alt="image-20240416112159-1.png"]]
941 -
942 -
943 -=== (% data-sider-select-id="77c6f3a0-3f73-4808-b92c-4d511a57b006" %)5.7.3 LogRead ~-~-> System Log(%%) ===
944 -
945 -
946 946  Show the system log
947 947  
948 948  
... ... @@ -949,49 +949,17 @@
949 949  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20220916140732-21.png?rev=1.1||alt="image-20220916140732-21.png" height="706" width="867"]]
950 950  
951 951  
952 -=== (% data-sider-select-id="5b732c0d-cdf6-42bb-b7a1-584b93d7c430" %)5.7.4 LogRead ~-~-> Record Log(%%) ===
953 -
954 -This interface can record gateway logs:
955 -
956 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20240416112510-2.png?width=870&height=296&rev=1.1||alt="image-20240416112510-2.png"]]
957 -
958 -
959 959  = 6.  More features =
960 960  
928 +== 6.1 Packet Filtering ==
961 961  
962 -== (% data-sider-select-id="2ef025e3-4214-4b1c-bb01-ee03e1db2bc2" %)6.1 NTP Service/Time Synchronization(%%) ==
963 963  
964 -The gateway time sync service is provided by ntpd
965 -
966 -=== 1). Modify the NTP server address: ===
967 -
968 -(% class="box" %)
969 -(((
970 -~#~##Linux command
971 -
972 -uci set system.ntp.server='0.openwrt.pool.ntp.org'  #Required
973 -
974 -uci add_list system.ntp.server='1.openwrt.pool.ntp.org' #Optional
975 -
976 -uci add_list system.ntp.server='2.openwrt.pool.ntp.org' #Optional
977 -
978 -uci add_list system.ntp.server='3.openwrt.pool.ntp.org'  #Optional
979 -
980 -uci commit system #Required
981 -)))
982 -
983 -**Note: If the NTP server is a Windows host, it may cause the time synchronization to fail, **
984 -
985 -
986 -== (% data-sider-select-id="060d238c-36fc-4453-b667-8dca3129ae44" %)6.2 Packet Filtering(%%) ==
987 -
988 -
989 989  Drop unwanted packets.
990 990  
991 991  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Filter%20unwanted%20LoRaWAN%20packets/]]
992 992  
993 993  
994 -== (% data-sider-select-id="8f1b89cd-d9d7-4d17-b064-f4615093f894" %)6.3 Remote Access(%%) ==
936 +== 6.2 Remote Access ==
995 995  
996 996  
997 997  Remote Access Devices for management.
... ... @@ -999,7 +999,7 @@
999 999  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access]]
1000 1000  
1001 1001  
1002 -== (% data-sider-select-id="ef830314-529b-4dc8-8ec6-29545522bf2e" %)6.4 How to decode ABP LoRaWAN node(%%) ==
944 +== 6.3 How to decode ABP LoRaWAN node ==
1003 1003  
1004 1004  
1005 1005  Decode ABP:
... ... @@ -1007,7 +1007,7 @@
1007 1007  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20~~-~~--%20LG308/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Communicate%20with%20ABP%20End%20Node%20without%20LoRaWAN%20Network%20Server%20---%20LG308/]]
1008 1008  
1009 1009  
1010 -== (% data-sider-select-id="304cacb4-477c-454f-90ec-649ffbe028fd" %)6.5 How to set data to MQTT broker(%%) ==
952 +== 6.4 How to set data to MQTT broker ==
1011 1011  
1012 1012  
1013 1013  Only support ABP LoRaWAN End Node
... ... @@ -1015,7 +1015,7 @@
1015 1015  Instruction: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/MQTT%20Forward%20Instruction/]]
1016 1016  
1017 1017  
1018 -== (% data-sider-select-id="af36f615-2cec-4e1d-991d-436d8a56567d" %)6.6 How the gateway connects to Chirpstack v3/v4 via gateway-bridge(%%) ==
960 +== 6.5 How the gateway connects to Chirpstack v3/v4 via gateway-bridge ==
1019 1019  
1020 1020  
1021 1021  **For Chirpstack v3 Gateway-bridge**:
... ... @@ -1041,148 +1041,11 @@
1041 1041  After updating the Chirpstack gateway-bridge firmware, there is no need to re-download and install the Chirpstack gateway-bridge package
1042 1042  
1043 1043  
1044 -(% data-sider-select-id="eb4b3bf2-9e33-4650-b4d6-1bc049896baa" %)
1045 -== (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)6.7  (% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %)How does the gateway connect to (% data-sider-select-id="e5ea7147-f618-4c9a-b8f9-e108ee76b9da" %)Chirpstack(% data-sider-select-id="1ae6690c-7910-44d5-999b-cd3b05be575f" %) via MQTT Forwarder(%%) ==
986 +== 6.6 How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive). ==
1046 1046  
1047 -
1048 -(% data-sider-select-id="33f2a7a8-cb1a-4c53-bd5b-716d3cc3d74f" %)
1049 -ChirpStack MQTT Forwarder is a MQTT packet forwarder for LoRa gateways. By default it forwards packets in Protobuf binary format, optionally it can be configured to use JSON encoding for debugging. In contrast to the ChirpStack Gateway Bridge, this component must always be installed on the gateway.
1050 -
1051 -
1052 -(% data-sider-select-id="73a14e4a-5128-4f13-8207-7837c412ff54" %)
1053 -=== 6.7.1 Configure Packet Forwarder ===
1054 -
1055 -
1056 -In the Dragino web-interface, you must configure the Packet Forwarder such that it forwards to localhost on port 1700.
1057 -
1058 -(% data-sider-select-id="2972d256-3078-403f-9e33-3740a5869405" %)
1059 -By default, the web-interface can be accessed by entering the following URL in your browser: (% data-sider-select-id="a9e64ab2-7a80-4174-b834-dba4904e3c85" %)**https:~/~/GATEWAY-IP-ADDRESS:8000**(%%) (replace GATEWAY-IP-ADDRESS by the actual IP address of your gateway). The default credentials are (% data-sider-select-id="16f9bbed-ffd7-4881-9cd1-33332f063857" %)**root / dragino**(%%).
1060 -
1061 -* In the **LoRaWAN** menu, click **LoRaWAN ~-~- Semtech UDP**
1062 -* Configure the following settings:
1063 -** **Service Provider:** //Custom / Private LoRaWAN//
1064 -** **Server Address:** //localhost//
1065 -** **Uplink Port:** //1700//
1066 -** **Downlink Port:** //1700//
1067 -* Click **Save&Apply**
1068 -
1069 -
1070 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518114149-2.png?width=876&height=683&rev=1.1||alt="image-20240518114149-2.png"]]
1071 -
1072 -
1073 -(% data-sider-select-id="7ada6cd9-b472-473e-b709-31db23947a9c" %)
1074 -=== 6.7.2 Install ChirpStack MQTT Forwarder ===
1075 -
1076 -
1077 -(% data-sider-select-id="cd761ad9-41f8-4cc3-8dc8-cf25ebe79e69" %)
1078 -(% data-sider-select-id="74577a45-a26e-4ab8-b56c-2ba79220e6c6" %)**SSH login**
1079 -
1080 -(% data-sider-select-id="f4b22a8a-3b87-4cc7-b4ed-451fdd8aa9a7" %)
1081 -First user must login into the gateway using SSH,user can refer to the link to access the Linux console via SSH to the gateway: **[[SSH Access for Linux console>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H7.A0LinuxSystem||data-sider-select-id="27b6862a-68e4-4f69-a5b2-b33d8a06a09c"]]**
1082 -
1083 -
1084 -(% data-sider-select-id="e9c9429f-f7c4-4eb3-b3f4-99553fe741b0" %)
1085 -(% data-sider-select-id="83ee7071-3524-45ba-99b2-9f3472815cd8" %)**Download IPK**
1086 -
1087 -Use the following commands to download the latest version of the chirpstack-mqtt-forwarder package:
1088 -
1089 -(% class="box infomessage" data-sider-select-id="b970d0e5-64ca-47c8-8c9c-6261200a719f" %)
1090 -(((
1091 -cd /tmp
1092 -wget https:~/~/artifacts.chirpstack.io/downloads/chirpstack-mqtt-forwarder/vendor/dragino/mips_24kc/chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1093 -)))
1094 -
1095 -
1096 -(% data-sider-select-id="27190188-ef2a-4d53-8b94-c4653b69b266" %)
1097 -(% data-sider-select-id="3fe3ef50-33b9-4c6b-b228-7364e01382f3" %)**Install IPK**
1098 -
1099 -Use the opkg package-manager to install the downloaded package. Example:
1100 -
1101 -(% class="box infomessage" data-sider-select-id="86f1197c-5aaf-4a1b-a21f-09266a2805e7" %)
1102 -(((
1103 -opkg install chirpstack-mqtt-forwarder_4.3.0-r1_mips_24kc.ipk
1104 -)))
1105 -
1106 -
1107 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518134824-5.png?rev=1.1||alt="image-20240518134824-5.png"]]
1108 -
1109 -(% data-sider-select-id="e8065348-1a8e-45a9-bb73-171b9322d2b2" %)
1110 -(% data-sider-select-id="e9401e38-e30d-4c39-94fa-927c9a40e151" %)**Configuration**
1111 -
1112 -(% data-sider-select-id="2a70737e-070b-4a83-a474-2fef1076a006" %)
1113 -To connect the ChirpStack MQTT Forwarder to your MQTT broker, you must update the ChirpStack MQTT Forwarder configuration file.
1114 -
1115 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1116 -This file is located at: (% data-sider-select-id="b010c8b8-6367-49bf-9c2e-3ee0b8a6ef0e" %)**/etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml**
1117 -
1118 -
1119 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1120 -(% data-sider-select-id="fab61fd5-2c9f-4b72-9b65-457dca26cbd0" %)**ChirpStack MQTT Forwarder Setting:**
1121 -
1122 -(% class="box" data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1123 -(((
1124 -topic_prefix  ~-~->  This corresponds to the frequency of the ChirpStack server
1125 -
1126 -server  ~-~->  Fill in the ChirpStack server address, Example: tcp:~/~/10.130.2.15:1883
1127 -)))
1128 -
1129 -(% data-sider-select-id="be45c14f-1537-457e-9c9b-3fec22c024ac" %)
1130 -username,password,ca_cert,tls_cert,tls_key parameters should be set as required.
1131 -
1132 -
1133 -Use commands to modify configuration files:
1134 -
1135 -(% class="box infomessage" data-sider-select-id="b84cf72d-69e4-441c-a8fb-bd21a500d223" %)
1136 -(((
1137 -vim /etc/chirpstack-mqtt-forwarder/chirpstack-mqtt-forwarder.toml
1138 -)))
1139 -
1140 -
1141 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518141059-6.png?rev=1.1||alt="image-20240518141059-6.png"]]
1142 -
1143 -(% data-sider-select-id="3312b6d5-334c-43ae-8cd9-2f73989940e2" %)
1144 -(% data-sider-select-id="2b334f7c-35d3-4771-8b17-5760685430ac" %)**(Re)start and stop commands**
1145 -
1146 -(% data-sider-select-id="b8175b05-70b1-4251-97a1-8c0b2644e4d4" %)
1147 -Use the following commands to (re)start and stop the ChirpStack MQTT Forwarder service:
1148 -
1149 -(% class="box infomessage" data-sider-select-id="fc0e9684-3620-4f52-8045-9f6b7dd083e3" %)
1150 -(((
1151 -# start
1152 -
1153 -(% data-sider-select-id="5a644c5c-1ca5-4680-877e-c6aecd21f9de" %)
1154 -/etc/init.d/chirpstack-mqtt-forwarder start
1155 -
1156 -# stop
1157 -
1158 -/etc/init.d/chirpstack-mqtt-forwarder stop
1159 -
1160 -# restart
1161 -
1162 -/etc/init.d/chirpstack-mqtt-forwarder restart
1163 -)))
1164 -
1165 -(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1166 -(% data-sider-select-id="fcef88f4-ef44-4459-9154-6cd154c5b298" %)**Check result**
1167 -
1168 -(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1169 -Use "(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" %)** **(%%)​​​​​(% data-sider-select-id="494c67e8-3e62-45ee-8464-e2bb33057003" style="background-color:yellow" %)**logread -f **(%%)" to check the operation of ChirpStack MQTT Forwarder.
1170 -
1171 -(% data-sider-select-id="bd72b54d-7316-46eb-8f1e-008a17aa6e9e" %)
1172 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518142300-7.png?rev=1.1||alt="image-20240518142300-7.png"]]
1173 -
1174 -
1175 -(% data-sider-select-id="a4ab5ddc-dbfe-4c41-ac6e-6159b517d02f" %)
1176 -Go back to the Chirpstack server to check whether the gateway is (% data-sider-select-id="0689bd86-c7a8-4831-b064-d1c4ed6241e5" %)**"online"**(%%) and whether the packets are displayed normally.
1177 -
1178 -
1179 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240518143050-8.png?width=1170&height=702&rev=1.1||alt="image-20240518143050-8.png"]]
1180 -
1181 -== (% data-sider-select-id="07a93540-35ce-4d6d-b77f-89e13682dd60" %)6.8  How to extend the gateway size of memory with USB device (SD/TF card, USB flash drive).(%%) ==
1182 -
1183 -
1184 1184  USB card reader plugged into the USB port of the gateway
1185 1185  
990 +
1186 1186  Access the gateway Linux Command Line
1187 1187  
1188 1188  
... ... @@ -1211,7 +1211,7 @@
1211 1211  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/DLOS8N/WebHome/image-20230425173831-3.png?width=833&height=105&rev=1.1||alt="image-20230425173831-3.png"]]
1212 1212  
1213 1213  
1214 -== (% data-sider-select-id="7ef57ac2-68e7-4fa6-bb6b-54f622bb6131" %)6.9  More instructions(%%) ==
1019 +== 6.7  More instructions ==
1215 1215  
1216 1216  
1217 1217  [[LoRaWAN Gateway Instruction>>doc:Main.WebHome]](LoRaWAN Gateway)
... ... @@ -1228,13 +1228,13 @@
1228 1228  
1229 1229  User can access the Linux console via the SSH protocol. Make sure your PC and the LG308N are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
1230 1230  
1231 -**IP address:  (% style="color:blue" %)IP address of LG308N(%%)**
1036 +IP address:  IP address of LG308N
1232 1232  
1233 -**Port:  (% style="color:blue" %)22 (via WiFi AP mode) or 2222 (via WAN Interface)(%%)**
1038 +Port:         22 (via WiFi AP mode) or 2222 (via WAN Interface)
1234 1234  
1235 -**User Name:      (% style="color:blue" %)root(%%)**
1040 +User Name:      (% style="color:green" %)**root**
1236 1236  
1237 -**Password:         (% style="color:blue" %)dragino(default)(%%)**
1042 +Password:         (% style="color:green" %)**dragino** (% style="color:black" %)(default)
1238 1238  
1239 1239  
1240 1240  After logging in, you will be in the Linux console and can enter commands as shown below.
... ... @@ -1242,7 +1242,7 @@
1242 1242  [[image:1652431588565-830.png]]
1243 1243  
1244 1244  
1245 -The “** (% style="color:blue" %)logread -f"(%%)**command can be used to debug how system runs.
1050 +The “** (% style="background-color:yellow" %)logread -f"(%%)**command can be used to debug how system runs.
1246 1246  
1247 1247  
1248 1248  [[image:1657070133275-283.png]]
... ... @@ -1348,7 +1348,6 @@
1348 1348  = 8.  Upgrade Linux Firmware =
1349 1349  
1350 1350  
1351 -
1352 1352  = 9.  OTA System Update =
1353 1353  
1354 1354  
... ... @@ -1455,7 +1455,7 @@
1455 1455  
1456 1456  )))
1457 1457  
1458 -== (% data-sider-select-id="4a86b654-4887-420c-8049-1c447cf98cbb" %)11.3  I configured LG308N for WiFi access and lost its IP. What to do now?(%%) ==
1262 +== 11.3  I configured LG308N for WiFi access and lost its IP. What to do now? ==
1459 1459  
1460 1460  
1461 1461  [[image:1657074078183-336.png]]
... ... @@ -1499,33 +1499,24 @@
1499 1499  3. In PC, use 172.31.255.254 to access LG308N via Web or Console.
1500 1500  
1501 1501  
1502 -== (% data-sider-select-id="4a86b654-4887-420c-8049-1c447cf98cbb" %)11.4  (%%)Why does the gateway reboot every 15 minutes without Internet? ==
1503 -
1504 -Check whether Internet Detect is enabled on the System~-~->General interface.
1505 -
1506 -Internet Detect is enabled by default. When there is no gateway network, it will reboot after 15 minutes.
1507 -
1508 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/image-20240419145139-6.png?width=856&height=639&rev=1.1||alt="image-20240419145139-6.png"]]
1509 -
1510 -
1511 1511  = 12.  Order Info =
1512 1512  
1513 1513  
1514 -**PART:(% style="color:blue" %) DLOS8N-XXX-YYY: (%%)**(% style="color:blue" %)
1309 +**//PART:(% style="color:blue" %) DLOS8N-XXX-YYY//: (%%)**(% style="color:blue" %)
1515 1515  
1516 -(% style="color:blue" %)**XXX:**(%%)** Frequency Band**
1311 +(% style="color:blue" %)**//XXX~://**(%%)**// Frequency Band//**
1517 1517  
1518 -* (% style="color:red" %)** 868**(%%) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1519 -* (% style="color:red" %)** 915**(%%):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1313 +* (% style="color:red" %)** 868**(% style="color:black" %) : valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865 or KZ865.
1314 +* (% style="color:red" %)** 915**(% style="color:black" %):  valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920
1520 1520  
1521 1521  (% style="color:#4f81bd" %)
1522 1522  
1523 -(% style="color:blue" %)**YYY:**(%%)** 4G Cellular Option**
1318 +(% style="color:blue" %)**//YYY~://**(%%)**// 4G Cellular Option//**
1524 1524  
1525 -* (% style="color:red" %)**EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India
1526 -* (% style="color:red" %)**EC25-AFX**(% style="color:black" %): America: Verizon, AT&T(FirstNet), U.S.Cellular; Canada: Telus
1527 -* (% style="color:red" %)**EC25-AUX**(% style="color:black" %): Latin America, New Zeland, Taiwan
1528 -* (% style="color:red" %)**EC25-J**(% style="color:black" %):  Japan, DOCOMO, SoftBank, KDDI
1320 +* (% style="color:red" %)** EC25-E**(% style="color:black" %):  EMEA, Korea, Thailand, India.
1321 +* (% style="color:red" %)** EC25-A**(% style="color:black" %):  North America/ Rogers/AT&T/T-Mobile.
1322 +* (% style="color:red" %)** EC25-AU**(% style="color:black" %): Latin America, New Zeland, Taiwan
1323 +* (% style="color:red" %)** EC25-J**(% style="color:black" %):  Japan, DOCOMO/SoftBank/ KDDI
1529 1529  
1530 1530  More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
1531 1531  
... ... @@ -1558,10 +1558,8 @@
1558 1558  
1559 1559  
1560 1560  * Try to see if your questions already answered in the [[wiki>>doc:Main.WebHome]].
1561 -
1562 1562  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8.
1563 1563  Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before mentioned schedule.
1564 -
1565 1565  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to: [[support@dragino.com>>url:file:///C:/Users/11315/Documents/D:/Projects/LoRa%20Product%20Line/LG308%20Picocell%20Gateway/LG308/LG308%20%25E8%25AF%25B4%25E6%2598%258E%25E4%25B9%25A6/support@dragino.com]]
1566 1566  
1567 1567  = 15.  Reference =
... ... @@ -1574,4 +1574,3 @@
1574 1574  * Firmware: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG308N-OLG308N/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/LG02-OLG02/Firmware/]]
1575 1575  
1576 1576  * Hardware Source code: [[https:~~/~~/github.com/dragino/motherboard-hardware/tree/master/LG308N>>url:https://github.com/dragino/motherboard-hardware/tree/master/LG308]]
1577 -)))

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0